X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blobdiff_plain;f=arch%2Farm%2Fmach-ux500%2Fcpu.c;h=f4185749437533f5acd930dcc612113f57556eef;hp=1da23bb87c16bcec2047d9ac8e08e474d2f505ce;hb=70c9f18ca8f3652c7dcf715e9f0d41c399fe130d;hpb=e5036c2575b244851637a81efc4104c076c4fa21

diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 1da23bb87c16..f41857494375 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -10,14 +10,12 @@
 #include <linux/clk.h>
 #include <linux/mfd/db8500-prcmu.h>
 #include <linux/mfd/db5500-prcmu.h>
+#include <linux/clksrc-dbx500-prcmu.h>
 
-#include <asm/cacheflush.h>
-#include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
 #include <asm/localtimer.h>
 
-#include <plat/mtu.h>
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
@@ -26,10 +24,6 @@
 
 void __iomem *_PRCMU_BASE;
 
-#ifdef CONFIG_CACHE_L2X0
-static void __iomem *l2x0_base;
-#endif
-
 void __init ux500_init_irq(void)
 {
 	void __iomem *dist_base;
@@ -53,96 +47,6 @@ void __init ux500_init_irq(void)
 	if (cpu_is_u5500())
 		db5500_prcmu_early_init();
 	if (cpu_is_u8500())
-		prcmu_early_init();
+		db8500_prcmu_early_init();
 	clk_init();
 }
-
-#ifdef CONFIG_CACHE_L2X0
-static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
-{
-	/* wait for the operation to complete */
-	while (readl_relaxed(reg) & mask)
-		;
-}
-
-static inline void ux500_cache_sync(void)
-{
-	void __iomem *base = l2x0_base;
-
-	writel_relaxed(0, base + L2X0_CACHE_SYNC);
-	ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
-}
-
-/*
- * The L2 cache cannot be turned off in the non-secure world.
- * Dummy until a secure service is in place.
- */
-static void ux500_l2x0_disable(void)
-{
-}
-
-/*
- * This is only called when doing a kexec, just after turning off the L2
- * and L1 cache, and it is surrounded by a spinlock in the generic version.
- * However, we're not really turning off the L2 cache right now and the
- * PL310 does not support exclusive accesses (used to implement the spinlock).
- * So, the invalidation needs to be done without the spinlock.
- */
-static void ux500_l2x0_inv_all(void)
-{
-	void __iomem *base = l2x0_base;
-	uint32_t l2x0_way_mask = (1<<16) - 1;	/* Bitmask of active ways */
-
-	/* invalidate all ways */
-	writel_relaxed(l2x0_way_mask, base + L2X0_INV_WAY);
-	ux500_cache_wait(base + L2X0_INV_WAY, l2x0_way_mask);
-	ux500_cache_sync();
-}
-
-static int ux500_l2x0_init(void)
-{
-	if (cpu_is_u5500())
-		l2x0_base = __io_address(U5500_L2CC_BASE);
-	else if (cpu_is_u8500())
-		l2x0_base = __io_address(U8500_L2CC_BASE);
-	else
-		ux500_unknown_soc();
-
-	/* 64KB way size, 8 way associativity, force WA */
-	l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
-
-	/* Override invalidate function */
-	outer_cache.disable = ux500_l2x0_disable;
-	outer_cache.inv_all = ux500_l2x0_inv_all;
-
-	return 0;
-}
-early_initcall(ux500_l2x0_init);
-#endif
-
-static void __init ux500_timer_init(void)
-{
-#ifdef CONFIG_LOCAL_TIMERS
-	/* Setup the local timer base */
-	if (cpu_is_u5500())
-		twd_base = __io_address(U5500_TWD_BASE);
-	else if (cpu_is_u8500())
-		twd_base = __io_address(U8500_TWD_BASE);
-	else
-		ux500_unknown_soc();
-#endif
-	if (cpu_is_u5500())
-		mtu_base = __io_address(U5500_MTU0_BASE);
-	else if (cpu_is_u8500ed())
-		mtu_base = __io_address(U8500_MTU0_BASE_ED);
-	else if (cpu_is_u8500())
-		mtu_base = __io_address(U8500_MTU0_BASE);
-	else
-		ux500_unknown_soc();
-
-	nmdk_timer_init();
-}
-
-struct sys_timer ux500_timer = {
-	.init	= ux500_timer_init,
-};