X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blobdiff_plain;f=arch%2Farm%2Fmach-ux500%2Fboard-mop500.c;h=a1c9ea1a66df65edcf223206fce760697edfd9e3;hp=cac83a694880f6dd6d17a62d39387cbf58128144;hb=949f6711b83d2809d1ccb9d830155a65fdacdff9;hpb=66fc5dff5e4f82c92723202a5de9bdec16a9331f diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index cac83a694880..a1c9ea1a66df 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -13,25 +13,26 @@ #include #include #include +#include #include #include #include #include #include -#include +#include #include #include #include #include -#include #include #include #include #include +#include "devices-db8500.h" #include "pins-db8500.h" #include "board-mop500.h" @@ -69,22 +70,12 @@ static pin_cfg_t mop500_pins[] = { GPIO166_KP_O2, GPIO167_KP_O1, GPIO168_KP_O0, -}; -static void ab4500_spi_cs_control(u32 command) -{ - /* set the FRM signal, which is CS - TODO */ -} + /* GPIO_EXP_INT */ + GPIO217_GPIO, -struct pl022_config_chip ab4500_chip_info = { - .com_mode = INTERRUPT_TRANSFER, - .iface = SSP_INTERFACE_MOTOROLA_SPI, - /* we can act as master only */ - .hierarchy = SSP_MASTER, - .slave_tx_disable = 0, - .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, - .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, - .cs_control = ab4500_spi_cs_control, + /* STMPE1601 IRQ */ + GPIO218_GPIO | PIN_INPUT_PULLUP, }; static struct ab8500_platform_data ab8500_platdata = { @@ -93,9 +84,9 @@ static struct ab8500_platform_data ab8500_platdata = { static struct resource ab8500_resources[] = { [0] = { - .start = IRQ_AB8500, - .end = IRQ_AB8500, - .flags = IORESOURCE_IRQ + .start = IRQ_DB8500_AB8500, + .end = IRQ_DB8500_AB8500, + .flags = IORESOURCE_IRQ } }; @@ -109,19 +100,6 @@ struct platform_device ab8500_device = { .resource = ab8500_resources, }; -static struct spi_board_info ab8500_spi_devices[] = { - { - .modalias = "ab8500-spi", - .controller_data = &ab4500_chip_info, - .platform_data = &ab8500_platdata, - .max_speed_hz = 12000000, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_3, - .irq = IRQ_DB8500_AB8500, - }, -}; - static struct pl022_ssp_controller ssp0_platform_data = { .bus_id = 0, /* pl022 not yet supports dma */ @@ -132,6 +110,34 @@ static struct pl022_ssp_controller ssp0_platform_data = { .num_chipselect = 5, }; +/* + * TC35892 + */ + +static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base) +{ + mop500_sdi_tc35892_init(); +} + +static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = { + .gpio_base = MOP500_EGPIO(0), + .setup = mop500_tc35892_init, +}; + +static struct tc3589x_platform_data mop500_tc35892_data = { + .block = TC3589x_BLOCK_GPIO, + .gpio = &mop500_tc35892_gpio_data, + .irq_base = MOP500_EGPIO_IRQ_BASE, +}; + +static struct i2c_board_info mop500_i2c0_devices[] = { + { + I2C_BOARD_INFO("tc3589x", 0x42), + .irq = NOMADIK_GPIO_TO_IRQ(217), + .platform_data = &mop500_tc35892_data, + }, +}; + #define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \ static struct nmk_i2c_controller u8500_i2c##id##_data = { \ /* \ @@ -161,159 +167,49 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); -static struct amba_device *amba_devs[] __initdata = { - &ux500_uart0_device, - &ux500_uart1_device, - &ux500_uart2_device, - &u8500_ssp0_device, -}; - -static const unsigned int ux500_keymap[] = { - KEY(2, 5, KEY_END), - KEY(4, 1, KEY_POWER), - KEY(3, 5, KEY_VOLUMEDOWN), - KEY(1, 3, KEY_3), - KEY(5, 2, KEY_RIGHT), - KEY(5, 0, KEY_9), - - KEY(0, 5, KEY_MENU), - KEY(7, 6, KEY_ENTER), - KEY(4, 5, KEY_0), - KEY(6, 7, KEY_2), - KEY(3, 4, KEY_UP), - KEY(3, 3, KEY_DOWN), - - KEY(6, 4, KEY_SEND), - KEY(6, 2, KEY_BACK), - KEY(4, 2, KEY_VOLUMEUP), - KEY(5, 5, KEY_1), - KEY(4, 3, KEY_LEFT), - KEY(3, 2, KEY_7), -}; - -static const struct matrix_keymap_data ux500_keymap_data = { - .keymap = ux500_keymap, - .keymap_size = ARRAY_SIZE(ux500_keymap), -}; +static void __init mop500_i2c_init(void) +{ + db8500_add_i2c0(&u8500_i2c0_data); + db8500_add_i2c1(&u8500_i2c1_data); + db8500_add_i2c2(&u8500_i2c2_data); + db8500_add_i2c3(&u8500_i2c3_data); +} -/* - * Nomadik SKE keypad - */ -#define ROW_PIN_I0 164 -#define ROW_PIN_I1 163 -#define ROW_PIN_I2 162 -#define ROW_PIN_I3 161 -#define ROW_PIN_I4 156 -#define ROW_PIN_I5 155 -#define ROW_PIN_I6 154 -#define ROW_PIN_I7 153 -#define COL_PIN_O0 168 -#define COL_PIN_O1 167 -#define COL_PIN_O2 166 -#define COL_PIN_O3 165 -#define COL_PIN_O4 160 -#define COL_PIN_O5 159 -#define COL_PIN_O6 158 -#define COL_PIN_O7 157 - -#define SKE_KPD_MAX_ROWS 8 -#define SKE_KPD_MAX_COLS 8 - -static int ske_kp_rows[] = { - ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3, - ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7, +/* add any platform devices here - TODO */ +static struct platform_device *platform_devs[] __initdata = { }; -/* - * ske_set_gpio_row: request and set gpio rows - */ -static int ske_set_gpio_row(int gpio) +static void __init mop500_spi_init(void) { - int ret; - - ret = gpio_request(gpio, "ske-kp"); - if (ret < 0) { - pr_err("ske_set_gpio_row: gpio request failed\n"); - return ret; - } - - ret = gpio_direction_output(gpio, 1); - if (ret < 0) { - pr_err("ske_set_gpio_row: gpio direction failed\n"); - gpio_free(gpio); - } - - return ret; + db8500_add_ssp0(&ssp0_platform_data); } -/* - * ske_kp_init - enable the gpio configuration - */ -static int ske_kp_init(void) +static void __init mop500_uart_init(void) { - int ret, i; - - for (i = 0; i < SKE_KPD_MAX_ROWS; i++) { - ret = ske_set_gpio_row(ske_kp_rows[i]); - if (ret < 0) { - pr_err("ske_kp_init: failed init\n"); - return ret; - } - } - - return 0; + db8500_add_uart0(); + db8500_add_uart1(); + db8500_add_uart2(); } -static struct ske_keypad_platform_data ske_keypad_board = { - .init = ske_kp_init, - .keymap_data = &ux500_keymap_data, - .no_autorepeat = true, - .krow = SKE_KPD_MAX_ROWS, /* 8x8 matrix */ - .kcol = SKE_KPD_MAX_COLS, - .debounce_ms = 40, /* in millsecs */ -}; - - - -/* add any platform devices here - TODO */ -static struct platform_device *platform_devs[] __initdata = { - &u8500_i2c0_device, - &ux500_i2c1_device, - &ux500_i2c2_device, - &ux500_i2c3_device, - &ux500_ske_keypad_device, -}; - static void __init u8500_init_machine(void) { - int i; - u8500_init_devices(); nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins)); - u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data; - ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data; - ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data; - ux500_i2c3_device.dev.platform_data = &u8500_i2c3_data; - ux500_ske_keypad_device.dev.platform_data = &ske_keypad_board; - - u8500_ssp0_device.dev.platform_data = &ssp0_platform_data; - - /* Register the active AMBA devices on this board */ - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); + mop500_i2c_init(); mop500_sdi_init(); + mop500_spi_init(); + mop500_uart_init(); + + mop500_keypad_init(); + + platform_device_register(&ab8500_device); - /* If HW is early drop (ED) or V1.0 then use SPI to access AB8500 */ - if (cpu_is_u8500ed() || cpu_is_u8500v10()) - spi_register_board_info(ab8500_spi_devices, - ARRAY_SIZE(ab8500_spi_devices)); - else /* If HW is v.1.1 or later use I2C to access AB8500 */ - platform_device_register(&ab8500_device); + i2c_register_board_info(0, mop500_i2c0_devices, + ARRAY_SIZE(mop500_i2c0_devices)); } MACHINE_START(U8500, "ST-Ericsson MOP500 platform")