X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blobdiff_plain;f=arch%2Farm%2Fmach-s3c2440%2Fmach-mini2440.c;h=dfedc9c9e0054db295e8a7815c3eb257b1e093d5;hp=f62bb4c793bdd6e226d6651d1e704b3b1459b94f;hb=1b506cfb6ae63f352643d6e208c85c1351547036;hpb=67290f41b2715de0e0ae93c9285fcbe37ffc5b22

diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index f62bb4c793bd..dfedc9c9e005 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -97,26 +97,8 @@ static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
 
 /* USB device UDC support */
 
-static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd)
-{
-	pr_debug("udc: pullup(%d)\n", cmd);
-
-	switch (cmd) {
-		case S3C2410_UDC_P_ENABLE :
-			gpio_set_value(S3C2410_GPC(5), 1);
-			break;
-		case S3C2410_UDC_P_DISABLE :
-			gpio_set_value(S3C2410_GPC(5), 0);
-			break;
-		case S3C2410_UDC_P_RESET :
-			break;
-		default:
-			break;
-	}
-}
-
 static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
-	.udc_command		= mini2440_udc_pullup,
+	.pullup_pin = S3C2410_GPC(5),
 };
 
 
@@ -506,6 +488,11 @@ static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
 	},
 };
 
+static struct platform_device uda1340_codec = {
+		.name = "uda134x-codec",
+		.id = -1,
+};
+
 static struct platform_device *mini2440_devices[] __initdata = {
 	&s3c_device_ohci,
 	&s3c_device_wdt,
@@ -521,7 +508,9 @@ static struct platform_device *mini2440_devices[] __initdata = {
 	&s3c_device_nand,
 	&s3c_device_sdi,
 	&s3c_device_iis,
+	&uda1340_codec,
 	&mini2440_audio,
+	&samsung_asoc_dma,
 };
 
 static void __init mini2440_map_io(void)
@@ -644,10 +633,6 @@ static void __init mini2440_init(void)
 	s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
 	s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
 
-	/* Make sure the D+ pullup pin is output */
-	WARN_ON(gpio_request(S3C2410_GPC(5), "udc pup"));
-	gpio_direction_output(S3C2410_GPC(5), 0);
-
 	/* mark the key as input, without pullups (there is one on the board) */
 	for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
 		s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);