X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blobdiff_plain;f=arch%2Farm%2Fmach-omap2%2Fomap_phy_internal.c;h=e2e605fe91386c652840285bd2c6cbcd1244dedf;hp=745252c60e320c00757aafe557583a9b7c503bc3;hb=2f284c846331fa44be1300a3c2c3e85800268a00;hpb=695884fb8acd9857e0e7120ccb2150e30f4b8fef

diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index 745252c60e32..e2e605fe9138 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -29,6 +29,7 @@
 #include <linux/usb.h>
 
 #include <plat/usb.h>
+#include "control.h"
 
 /* OMAP control module register for UTMI PHY */
 #define CONTROL_DEV_CONF		0x300
@@ -43,6 +44,7 @@
 
 static struct clk *phyclk, *clk48m, *clk32k;
 static void __iomem *ctrl_base;
+static int usbotghs_control;
 
 int omap4430_phy_init(struct device *dev)
 {
@@ -103,13 +105,6 @@ int omap4430_phy_set_clk(struct device *dev, int on)
 int omap4430_phy_power(struct device *dev, int ID, int on)
 {
 	if (on) {
-		/* enabled the clocks */
-		omap4430_phy_set_clk(dev, 1);
-		/* power on the phy */
-		if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
-			__raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
-			mdelay(200);
-		}
 		if (ID)
 			/* enable VBUS valid, IDDIG groung */
 			__raw_writel(AVALID | VBUSVALID, ctrl_base +
@@ -125,10 +120,31 @@ int omap4430_phy_power(struct device *dev, int ID, int on)
 		/* Enable session END and IDIG to high impedence. */
 		__raw_writel(SESSEND | IDDIG, ctrl_base +
 					USBOTGHS_CONTROL);
+	}
+	return 0;
+}
+
+int omap4430_phy_suspend(struct device *dev, int suspend)
+{
+	if (suspend) {
 		/* Disable the clocks */
 		omap4430_phy_set_clk(dev, 0);
 		/* Power down the phy */
 		__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+
+		/* save the context */
+		usbotghs_control = __raw_readl(ctrl_base + USBOTGHS_CONTROL);
+	} else {
+		/* Enable the internel phy clcoks */
+		omap4430_phy_set_clk(dev, 1);
+		/* power on the phy */
+		if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
+			__raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+			mdelay(200);
+		}
+
+		/* restore the context */
+		__raw_writel(usbotghs_control, ctrl_base + USBOTGHS_CONTROL);
 	}
 
 	return 0;
@@ -147,3 +163,95 @@ int omap4430_phy_exit(struct device *dev)
 
 	return 0;
 }
+
+void am35x_musb_reset(void)
+{
+	u32	regval;
+
+	/* Reset the musb interface */
+	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+
+	regval |= AM35XX_USBOTGSS_SW_RST;
+	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+
+	regval &= ~AM35XX_USBOTGSS_SW_RST;
+	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+}
+
+void am35x_musb_phy_power(u8 on)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(100);
+	u32 devconf2;
+
+	if (on) {
+		/*
+		 * Start the on-chip PHY and its PLL.
+		 */
+		devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+		devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
+		devconf2 |= CONF2_PHY_PLLON;
+
+		omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+
+		pr_info(KERN_INFO "Waiting for PHY clock good...\n");
+		while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
+				& CONF2_PHYCLKGD)) {
+			cpu_relax();
+
+			if (time_after(jiffies, timeout)) {
+				pr_err(KERN_ERR "musb PHY clock good timed out\n");
+				break;
+			}
+		}
+	} else {
+		/*
+		 * Power down the on-chip PHY.
+		 */
+		devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+		devconf2 &= ~CONF2_PHY_PLLON;
+		devconf2 |=  CONF2_PHYPWRDN | CONF2_OTGPWRDN;
+		omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+	}
+}
+
+void am35x_musb_clear_irq(void)
+{
+	u32 regval;
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval |= AM35XX_USBOTGSS_INT_CLR;
+	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+void am35x_musb_set_mode(u8 musb_mode)
+{
+	u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+	devconf2 &= ~CONF2_OTGMODE;
+	switch (musb_mode) {
+#ifdef	CONFIG_USB_MUSB_HDRC_HCD
+	case MUSB_HOST:		/* Force VBUS valid, ID = 0 */
+		devconf2 |= CONF2_FORCE_HOST;
+		break;
+#endif
+#ifdef	CONFIG_USB_GADGET_MUSB_HDRC
+	case MUSB_PERIPHERAL:	/* Force VBUS valid, ID = 1 */
+		devconf2 |= CONF2_FORCE_DEVICE;
+		break;
+#endif
+#ifdef	CONFIG_USB_MUSB_OTG
+	case MUSB_OTG:		/* Don't override the VBUS/ID comparators */
+		devconf2 |= CONF2_NO_OVERRIDE;
+		break;
+#endif
+	default:
+		pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
+	}
+
+	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+}