X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blobdiff_plain;f=arch%2Farm%2Fmach-omap2%2Fclock.h;h=3cd37cb57c5a562955351a980f58615ee4bc4f38;hp=4f791866b910900bdd1b40058929e6acd408976f;hb=6d52dcbe56ca8464bcad56d98a64bcd781596663;hpb=5e16e3f0e24dadb79b96b6134cd3303f0d42f0c5

diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 4f791866b910..3cd37cb57c5a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -1,13 +1,12 @@
 /*
- *  linux/arch/arm/mach-omap24xx/clock.h
+ *  linux/arch/arm/mach-omap2/clock.h
  *
- *  Copyright (C) 2005 Texas Instruments Inc.
- *  Richard Woodruff <r-woodruff2@ti.com>
- *  Created for OMAP2.
+ *  Copyright (C) 2005-2008 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2008 Nokia Corporation
  *
- *  Copyright (C) 2004 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *  Contacts:
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Paul Walmsley
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -17,2095 +16,59 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK_H
 
-static void omap2_sys_clk_recalc(struct clk * clk);
-static void omap2_clksel_recalc(struct clk * clk);
-static void omap2_followparent_recalc(struct clk * clk);
-static void omap2_propagate_rate(struct clk * clk);
-static void omap2_mpu_recalc(struct clk * clk);
-static int omap2_select_table_rate(struct clk * clk, unsigned long rate);
-static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate);
-static void omap2_clk_disable(struct clk *clk);
-static void omap2_sys_clk_recalc(struct clk * clk);
-static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val);
-static u32 omap2_clksel_get_divisor(struct clk *clk);
-
-
-#define RATE_IN_242X	(1 << 0)
-#define RATE_IN_243X	(1 << 1)
-
-/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
- * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- */
-struct prcm_config {
-	unsigned long xtal_speed;	/* crystal rate */
-	unsigned long dpll_speed;	/* dpll: out*xtal*M/(N-1)table_recalc */
-	unsigned long mpu_speed;	/* speed of MPU */
-	unsigned long cm_clksel_mpu;	/* mpu divider */
-	unsigned long cm_clksel_dsp;	/* dsp+iva1 div(2420), iva2.1(2430) */
-	unsigned long cm_clksel_gfx;	/* gfx dividers */
-	unsigned long cm_clksel1_core;	/* major subsystem dividers */
-	unsigned long cm_clksel1_pll;	/* m,n */
-	unsigned long cm_clksel2_pll;	/* dpllx1 or x2 out */
-	unsigned long cm_clksel_mdm;	/* modem dividers 2430 only */
-	unsigned long base_sdrc_rfr;	/* base refresh timing for a set */
-	unsigned char flags;
-};
-
-/* Mask for clksel which support parent settign in set_rate */
-#define SRC_SEL_MASK (CM_CORE_SEL1 | CM_CORE_SEL2 | CM_WKUP_SEL1 | \
-			CM_PLL_SEL1 | CM_PLL_SEL2 | CM_SYSCLKOUT_SEL1)
-
-/* Mask for clksel regs which support rate operations */
-#define SRC_RATE_SEL_MASK (CM_MPU_SEL1 | CM_DSP_SEL1 | CM_GFX_SEL1 | \
-			CM_MODEM_SEL1 | CM_CORE_SEL1 | CM_CORE_SEL2 | \
-			CM_WKUP_SEL1 | CM_PLL_SEL1 | CM_PLL_SEL2 | \
-			CM_SYSCLKOUT_SEL1)
-
-/*
- * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
- * These configurations are characterized by voltage and speed for clocks.
- * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
- * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
- *
- * 2430 differs from 2420 in that there are no more phase synchronizers used.
- * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
- * 2430 (iva2.1, NOdsp, mdm)
- */
-
-/* Core fields for cm_clksel, not ratio governed */
-#define RX_CLKSEL_DSS1			(0x10 << 8)
-#define RX_CLKSEL_DSS2			(0x0 << 13)
-#define RX_CLKSEL_SSI			(0x5 << 20)
-
-/*-------------------------------------------------------------------------
- * Voltage/DPLL ratios
- *-------------------------------------------------------------------------*/
-
-/* 2430 Ratio's, 2430-Ratio Config 1 */
-#define R1_CLKSEL_L3			(4 << 0)
-#define R1_CLKSEL_L4			(2 << 5)
-#define R1_CLKSEL_USB			(4 << 25)
-#define R1_CM_CLKSEL1_CORE_VAL		R1_CLKSEL_USB | RX_CLKSEL_SSI | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					R1_CLKSEL_L4 | R1_CLKSEL_L3
-#define R1_CLKSEL_MPU			(2 << 0)
-#define R1_CM_CLKSEL_MPU_VAL		R1_CLKSEL_MPU
-#define R1_CLKSEL_DSP			(2 << 0)
-#define R1_CLKSEL_DSP_IF		(2 << 5)
-#define R1_CM_CLKSEL_DSP_VAL		R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF
-#define R1_CLKSEL_GFX			(2 << 0)
-#define R1_CM_CLKSEL_GFX_VAL		R1_CLKSEL_GFX
-#define R1_CLKSEL_MDM			(4 << 0)
-#define R1_CM_CLKSEL_MDM_VAL		R1_CLKSEL_MDM
-
-/* 2430-Ratio Config 2 */
-#define R2_CLKSEL_L3			(6 << 0)
-#define R2_CLKSEL_L4			(2 << 5)
-#define R2_CLKSEL_USB			(2 << 25)
-#define R2_CM_CLKSEL1_CORE_VAL		R2_CLKSEL_USB | RX_CLKSEL_SSI | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					R2_CLKSEL_L4 | R2_CLKSEL_L3
-#define R2_CLKSEL_MPU			(2 << 0)
-#define R2_CM_CLKSEL_MPU_VAL		R2_CLKSEL_MPU
-#define R2_CLKSEL_DSP			(2 << 0)
-#define R2_CLKSEL_DSP_IF		(3 << 5)
-#define R2_CM_CLKSEL_DSP_VAL		R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF
-#define R2_CLKSEL_GFX			(2 << 0)
-#define R2_CM_CLKSEL_GFX_VAL		R2_CLKSEL_GFX
-#define R2_CLKSEL_MDM			(6 << 0)
-#define R2_CM_CLKSEL_MDM_VAL		R2_CLKSEL_MDM
-
-/* 2430-Ratio Bootm (BYPASS) */
-#define RB_CLKSEL_L3			(1 << 0)
-#define RB_CLKSEL_L4			(1 << 5)
-#define RB_CLKSEL_USB			(1 << 25)
-#define RB_CM_CLKSEL1_CORE_VAL		RB_CLKSEL_USB | RX_CLKSEL_SSI | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					RB_CLKSEL_L4 | RB_CLKSEL_L3
-#define RB_CLKSEL_MPU			(1 << 0)
-#define RB_CM_CLKSEL_MPU_VAL		RB_CLKSEL_MPU
-#define RB_CLKSEL_DSP			(1 << 0)
-#define RB_CLKSEL_DSP_IF		(1 << 5)
-#define RB_CM_CLKSEL_DSP_VAL		RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF
-#define RB_CLKSEL_GFX			(1 << 0)
-#define RB_CM_CLKSEL_GFX_VAL		RB_CLKSEL_GFX
-#define RB_CLKSEL_MDM			(1 << 0)
-#define RB_CM_CLKSEL_MDM_VAL		RB_CLKSEL_MDM
-
-/* 2420 Ratio Equivalents */
-#define RXX_CLKSEL_VLYNQ		(0x12 << 15)
-#define RXX_CLKSEL_SSI			(0x8 << 20)
-
-/* 2420-PRCM III 532MHz core */
-#define RIII_CLKSEL_L3			(4 << 0)	/* 133MHz */
-#define RIII_CLKSEL_L4			(2 << 5)	/* 66.5MHz */
-#define RIII_CLKSEL_USB			(4 << 25)	/* 33.25MHz */
-#define RIII_CM_CLKSEL1_CORE_VAL	RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
-					RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
-					RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
-					RIII_CLKSEL_L3
-#define RIII_CLKSEL_MPU			(2 << 0)	/* 266MHz */
-#define RIII_CM_CLKSEL_MPU_VAL		RIII_CLKSEL_MPU
-#define RIII_CLKSEL_DSP			(3 << 0)	/* c5x - 177.3MHz */
-#define RIII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 88.67MHz */
-#define RIII_SYNC_DSP			(1 << 7)	/* Enable sync */
-#define RIII_CLKSEL_IVA			(6 << 8)	/* iva1 - 88.67MHz */
-#define RIII_SYNC_IVA			(1 << 13)	/* Enable sync */
-#define RIII_CM_CLKSEL_DSP_VAL		RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
-					RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
-					RIII_CLKSEL_DSP
-#define RIII_CLKSEL_GFX			(2 << 0)	/* 66.5MHz */
-#define RIII_CM_CLKSEL_GFX_VAL		RIII_CLKSEL_GFX
-
-/* 2420-PRCM II 600MHz core */
-#define RII_CLKSEL_L3			(6 << 0)	/* 100MHz */
-#define RII_CLKSEL_L4			(2 << 5)	/* 50MHz */
-#define RII_CLKSEL_USB			(2 << 25)	/* 50MHz */
-#define RII_CM_CLKSEL1_CORE_VAL		RII_CLKSEL_USB | \
-					RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					RII_CLKSEL_L4 | RII_CLKSEL_L3
-#define RII_CLKSEL_MPU			(2 << 0)	/* 300MHz */
-#define RII_CM_CLKSEL_MPU_VAL		RII_CLKSEL_MPU
-#define RII_CLKSEL_DSP			(3 << 0)	/* c5x - 200MHz */
-#define RII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 100MHz */
-#define RII_SYNC_DSP			(0 << 7)	/* Bypass sync */
-#define RII_CLKSEL_IVA			(6 << 8)	/* iva1 - 200MHz */
-#define RII_SYNC_IVA			(0 << 13)	/* Bypass sync */
-#define RII_CM_CLKSEL_DSP_VAL		RII_SYNC_IVA | RII_CLKSEL_IVA | \
-					RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
-					RII_CLKSEL_DSP
-#define RII_CLKSEL_GFX			(2 << 0)	/* 50MHz */
-#define RII_CM_CLKSEL_GFX_VAL		RII_CLKSEL_GFX
-
-/* 2420-PRCM VII (boot) */
-#define RVII_CLKSEL_L3			(1 << 0)
-#define RVII_CLKSEL_L4			(1 << 5)
-#define RVII_CLKSEL_DSS1		(1 << 8)
-#define RVII_CLKSEL_DSS2		(0 << 13)
-#define RVII_CLKSEL_VLYNQ		(1 << 15)
-#define RVII_CLKSEL_SSI			(1 << 20)
-#define RVII_CLKSEL_USB			(1 << 25)
-
-#define RVII_CM_CLKSEL1_CORE_VAL	RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
-					RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \
-					RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3
-
-#define RVII_CLKSEL_MPU			(1 << 0) /* all divide by 1 */
-#define RVII_CM_CLKSEL_MPU_VAL		RVII_CLKSEL_MPU
-
-#define RVII_CLKSEL_DSP			(1 << 0)
-#define RVII_CLKSEL_DSP_IF		(1 << 5)
-#define RVII_SYNC_DSP			(0 << 7)
-#define RVII_CLKSEL_IVA			(1 << 8)
-#define RVII_SYNC_IVA			(0 << 13)
-#define RVII_CM_CLKSEL_DSP_VAL		RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \
-					RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP
-
-#define RVII_CLKSEL_GFX			(1 << 0)
-#define RVII_CM_CLKSEL_GFX_VAL		RVII_CLKSEL_GFX
-
-/*-------------------------------------------------------------------------
- * 2430 Target modes: Along with each configuration the CPU has several
- * modes which goes along with them. Modes mainly are the addition of
- * describe DPLL combinations to go along with a ratio.
- *-------------------------------------------------------------------------*/
-
-/* Hardware governed */
-#define MX_48M_SRC			(0 << 3)
-#define MX_54M_SRC			(0 << 5)
-#define MX_APLLS_CLIKIN_12		(3 << 23)
-#define MX_APLLS_CLIKIN_13		(2 << 23)
-#define MX_APLLS_CLIKIN_19_2		(0 << 23)
-
-/*
- * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
- * #2	(ratio1) baseport-target
- * #5a	(ratio1) baseport-target, target DPLL = 266*2 = 532MHz
- */
-#define M5A_DPLL_MULT_12		(133 << 12)
-#define M5A_DPLL_DIV_12			(5 << 8)
-#define M5A_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define M5A_DPLL_MULT_13		(266 << 12)
-#define M5A_DPLL_DIV_13			(12 << 8)
-#define M5A_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-#define M5A_DPLL_MULT_19		(180 << 12)
-#define M5A_DPLL_DIV_19			(12 << 8)
-#define M5A_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-/* #5b	(ratio1) target DPLL = 200*2 = 400MHz */
-#define M5B_DPLL_MULT_12		(50 << 12)
-#define M5B_DPLL_DIV_12			(2 << 8)
-#define M5B_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define M5B_DPLL_MULT_13		(200 << 12)
-#define M5B_DPLL_DIV_13			(12 << 8)
-
-#define M5B_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-#define M5B_DPLL_MULT_19		(125 << 12)
-#define M5B_DPLL_DIV_19			(31 << 8)
-#define M5B_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-/*
- * #4	(ratio2)
- * #3	(ratio2) baseport-target, target DPLL = 330*2 = 660MHz
- */
-#define M3_DPLL_MULT_12			(55 << 12)
-#define M3_DPLL_DIV_12			(1 << 8)
-#define M3_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define M3_DPLL_MULT_13			(330 << 12)
-#define M3_DPLL_DIV_13			(12 << 8)
-#define M3_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-#define M3_DPLL_MULT_19			(275 << 12)
-#define M3_DPLL_DIV_19			(15 << 8)
-#define M3_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-/* boot (boot) */
-#define MB_DPLL_MULT			(1 << 12)
-#define MB_DPLL_DIV			(0 << 8)
-#define MB_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
-					MB_DPLL_MULT | MX_APLLS_CLIKIN_12
-
-#define MB_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
-					MB_DPLL_MULT | MX_APLLS_CLIKIN_13
-
-#define MB_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
-					MB_DPLL_MULT | MX_APLLS_CLIKIN_19
-
-/*
- * 2430 - chassis (sedna)
- * 165 (ratio1) same as above #2
- * 150 (ratio1)
- * 133 (ratio2) same as above #4
- * 110 (ratio2) same as above #3
- * 104 (ratio2)
- * boot (boot)
- */
-
-/*
- * 2420 Equivalent - mode registers
- * PRCM II , target DPLL = 2*300MHz = 600MHz
- */
-#define MII_DPLL_MULT_12		(50 << 12)
-#define MII_DPLL_DIV_12			(1 << 8)
-#define MII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define MII_DPLL_MULT_13		(300 << 12)
-#define MII_DPLL_DIV_13			(12 << 8)
-#define MII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-
-/* PRCM III target DPLL = 2*266 = 532MHz*/
-#define MIII_DPLL_MULT_12		(133 << 12)
-#define MIII_DPLL_DIV_12		(5 << 8)
-#define MIII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define MIII_DPLL_MULT_13		(266 << 12)
-#define MIII_DPLL_DIV_13		(12 << 8)
-#define MIII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-
-/* PRCM VII (boot bypass) */
-#define MVII_CM_CLKSEL1_PLL_12_VAL	MB_CM_CLKSEL1_PLL_12_VAL
-#define MVII_CM_CLKSEL1_PLL_13_VAL	MB_CM_CLKSEL1_PLL_13_VAL
-
-/* High and low operation value */
-#define MX_CLKSEL2_PLL_2x_VAL		(2 << 0)
-#define MX_CLKSEL2_PLL_1x_VAL		(1 << 0)
-
-/*
- * These represent optimal values for common parts, it won't work for all.
- * As long as you scale down, most parameters are still work, they just
- * become sub-optimal. The RFR value goes in the opposite direction. If you
- * don't adjust it down as your clock period increases the refresh interval
- * will not be met. Setting all parameters for complete worst case may work,
- * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration.	A dynamic call is
- * need for that as no single right value exists acorss production samples.
- *
- * Only the FULL speed values are given. Current code is such that rate
- * changes must be made at DPLLoutx2. The actual value adjustment for low
- * frequency operation will be handled by omap_set_performance()
- *
- * By having the boot loader boot up in the fastest L4 speed available likely
- * will result in something which you can switch between.
- */
-#define V24XX_SDRC_RFR_CTRL_133MHz	(0x0003de00 | 1)
-#define V24XX_SDRC_RFR_CTRL_100MHz	(0x0002da01 | 1)
-#define V24XX_SDRC_RFR_CTRL_110MHz	(0x0002da01 | 1) /* Need to calc */
-#define V24XX_SDRC_RFR_CTRL_BYPASS	(0x00005000 | 1) /* Need to calc */
-
-/* MPU speed defines */
-#define S12M	12000000
-#define S13M	13000000
-#define S19M	19200000
-#define S26M	26000000
-#define S100M	100000000
-#define S133M	133000000
-#define S150M	150000000
-#define S165M	165000000
-#define S200M	200000000
-#define S266M	266000000
-#define S300M	300000000
-#define S330M	330000000
-#define S400M	400000000
-#define S532M	532000000
-#define S600M	600000000
-#define S660M	660000000
-
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
- * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
- * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- *
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
- *
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used.	Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set.	 The exception is the bypass setting which is
- * availble for low power bypass.
- *
- * Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
-static struct prcm_config rate_table[] = {
-	/* PRCM II - FAST */
-	{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	/* PRCM III - FAST */
-	{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	/* PRCM II - SLOW */
-	{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	/* PRCM III - SLOW */
-	{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	/* PRCM-VII (boot-bypass) */
-	{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL,		/* 12MHz ARM*/
-		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
-		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_242X},
-
-	/* PRCM-VII (boot-bypass) */
-	{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL,		/* 13MHz ARM */
-		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
-		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_242X},
-
-	/* PRCM #3 - ratio2 (ES2) - FAST */
-	{S13M, S660M, S330M, R2_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
-		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
-		R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_110MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5a - ratio1 - FAST */
-	{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5b - ratio1 - FAST */
-	{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_243X},
-
-	/* PRCM #3 - ratio2 (ES2) - SLOW */
-	{S13M, S330M, S165M, R2_CM_CLKSEL_MPU_VAL,		/* 165MHz ARM */
-		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
-		R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_110MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5a - ratio1 - SLOW */
-	{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5b - ratio1 - SLOW*/
-	{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL,		/* 100MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_243X},
-
-	/* PRCM-boot/bypass */
-	{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,		/* 13Mhz */
-		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
-		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_243X},
-
-	/* PRCM-boot/bypass */
-	{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,		/* 12Mhz */
-		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
-		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_243X},
-
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
-};
-
-/*-------------------------------------------------------------------------
- * 24xx clock tree.
- *
- * NOTE:In many cases here we are assigning a 'default' parent.	In many
- *	cases the parent is selectable.	The get/set parent calls will also
- *	switch sources.
- *
- *	Many some clocks say always_enabled, but they can be auto idled for
- *	power savings. They will always be available upon clock request.
- *
- *	Several sources are given initial rates which may be wrong, this will
- *	be fixed up in the init func.
- *
- *	Things are broadly separated below by clock domains. It is
- *	noteworthy that most periferals have dependencies on multiple clock
- *	domains. Many get their interface clocks from the L4 domain, but get
- *	functional clocks from fixed sources or other core domain derived
- *	clocks.
- *-------------------------------------------------------------------------*/
-
-/* Base external input clocks */
-static struct clk func_32k_ck = {
-	.name		= "func_32k_ck",
-	.rate		= 32000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | ALWAYS_ENABLED,
-};
-
-/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
-static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
-	.name		= "osc_ck",
-	.rate		= 26000000,		/* fixed up in clock init */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-};
-
-/* With out modem likely 12MHz, with modem likely 13MHz */
-static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
-	.name		= "sys_ck",		/* ~ ref_clk also */
-	.parent		= &osc_ck,
-	.rate		= 13000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
-	.rate_offset	= 6, /* sysclkdiv 1 or 2, already handled or no boot */
-	.recalc		= &omap2_sys_clk_recalc,
-};
-
-static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
-	.name		= "alt_ck",
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
-	.recalc		= &omap2_propagate_rate,
-};
-
-/*
- * Analog domain root source clocks
- */
-
-/* dpll_ck, is broken out in to special cases through clksel */
-static struct clk dpll_ck = {
-	.name		= "dpll_ck",
-	.parent		= &sys_ck,		/* Can be func_32k also */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES | RATE_CKCTL | CM_PLL_SEL1,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk apll96_ck = {
-	.name		= "apll96_ck",
-	.parent		= &sys_ck,
-	.rate		= 96000000,
-	.flags		= CLOCK_IN_OMAP242X |CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0x2,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk apll54_ck = {
-	.name		= "apll54_ck",
-	.parent		= &sys_ck,
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0x6,
-	.recalc		= &omap2_propagate_rate,
-};
-
-/*
- * PRCM digital base sources
- */
-static struct clk func_54m_ck = {
-	.name		= "func_54m_ck",
-	.parent		= &apll54_ck,	/* can also be alt_clk */
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES,
-	.src_offset	= 5,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0xff,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk core_ck = {
-	.name		= "core_ck",
-	.parent		= &dpll_ck,		/* can also be 32k */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ALWAYS_ENABLED | RATE_PROPAGATES,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk sleep_ck = {		/* sys_clk or 32k */
-	.name		= "sleep_ck",
-	.parent		= &func_32k_ck,
-	.rate		= 32000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk func_96m_ck = {
-	.name		= "func_96m_ck",
-	.parent		= &apll96_ck,
-	.rate		= 96000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0xff,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk func_48m_ck = {
-	.name		= "func_48m_ck",
-	.parent		= &apll96_ck,	 /* 96M or Alt */
-	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES,
-	.src_offset	= 3,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0xff,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk func_12m_ck = {
-	.name		= "func_12m_ck",
-	.parent		= &func_48m_ck,
-	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.recalc		= &omap2_propagate_rate,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0xff,
-};
-
-/* Secure timer, only available in secure mode */
-static struct clk wdt1_osc_ck = {
-	.name		= "ck_wdt1_osc",
-	.parent		= &osc_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk sys_clkout = {
-	.name		= "sys_clkout",
-	.parent		= &func_54m_ck,
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_SYSCLKOUT_SEL1 | RATE_CKCTL,
-	.src_offset	= 0,
-	.enable_reg	= (void __iomem *)&PRCM_CLKOUT_CTRL,
-	.enable_bit	= 7,
-	.rate_offset	= 3,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* In 2430, new in 2420 ES2 */
-static struct clk sys_clkout2 = {
-	.name		= "sys_clkout2",
-	.parent		= &func_54m_ck,
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_SYSCLKOUT_SEL1 | RATE_CKCTL,
-	.src_offset	= 8,
-	.enable_reg	= (void __iomem *)&PRCM_CLKOUT_CTRL,
-	.enable_bit	= 15,
-	.rate_offset	= 11,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk emul_ck = {
-	.name		= "emul_ck",
-	.parent		= &func_54m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&PRCM_CLKEMUL_CTRL,
-	.enable_bit	= 0,
-	.recalc		= &omap2_propagate_rate,
-
-};
-
-/*
- * MPU clock domain
- *	Clocks:
- *		MPU_FCLK, MPU_ICLK
- *		INT_M_FCLK, INT_M_I_CLK
- *
- * - Individual clocks are hardware managed.
- * - Base divider comes from: CM_CLKSEL_MPU
- *
- */
-static struct clk mpu_ck = {	/* Control cpu */
-	.name		= "mpu_ck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL |
-				ALWAYS_ENABLED | CM_MPU_SEL1 | DELAYED_APP |
-				CONFIG_PARTICIPANT | RATE_PROPAGATES,
-	.rate_offset	= 0,	/* bits 0-4 */
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain
- * Clocks:
- *	2430: IVA2.1_FCLK, IVA2.1_ICLK
- *	2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP
- */
-static struct clk iva2_1_fck = {
-	.name		= "iva2_1_fck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 |
-				DELAYED_APP | RATE_PROPAGATES |
-				CONFIG_PARTICIPANT,
-	.rate_offset	= 0,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
-	.enable_bit	= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk iva2_1_ick = {
-	.name		= "iva2_1_ick",
-	.parent		= &iva2_1_fck,
-	.flags		= CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 |
-				DELAYED_APP | CONFIG_PARTICIPANT,
-	.rate_offset	= 5,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * Won't be too specific here. The core clock comes into this block
- * it is divided then tee'ed. One branch goes directly to xyz enable
- * controls. The other branch gets further divided by 2 then possibly
- * routed into a synchronizer and out of clocks abc.
- */
-static struct clk dsp_fck = {
-	.name		= "dsp_fck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 |
-			DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES,
-	.rate_offset	= 0,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
-	.enable_bit	= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk dsp_ick = {
-	.name		= "dsp_ick",	 /* apparently ipi and isp */
-	.parent		= &dsp_fck,
-	.flags		= CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 |
-				DELAYED_APP | CONFIG_PARTICIPANT,
-	.rate_offset = 5,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_DSP,
-	.enable_bit	= 1,		/* for ipi */
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk iva1_ifck = {
-	.name		= "iva1_ifck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CM_DSP_SEL1 | RATE_CKCTL |
-			CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP,
-	.rate_offset= 8,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
-	.enable_bit	= 10,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* IVA1 mpu/int/i/f clocks are /2 of parent */
-static struct clk iva1_mpu_int_ifck = {
-	.name		= "iva1_mpu_int_ifck",
-	.parent		= &iva1_ifck,
-	.flags		= CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
-	.enable_bit	= 8,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * L3 clock domain
- * L3 clocks are used for both interface and functional clocks to
- * multiple entities. Some of these clocks are completely managed
- * by hardware, and some others allow software control. Hardware
- * managed ones general are based on directly CLK_REQ signals and
- * various auto idle settings. The functional spec sets many of these
- * as 'tie-high' for their enables.
- *
- * I-CLOCKS:
- *	L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA
- *	CAM, HS-USB.
- * F-CLOCK
- *	SSI.
- *
- * GPMC memories and SDRC have timing and clock sensitive registers which
- * may very well need notification when the clock changes. Currently for low
- * operating points, these are taken care of in sleep.S.
- */
-static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
-	.name		= "core_l3_ck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 |
-				DELAYED_APP | CONFIG_PARTICIPANT |
-				RATE_PROPAGATES,
-	.rate_offset	= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk usb_l4_ick = {	/* FS-USB interface clock */
-	.name		= "usb_l4_ick",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP |
-				CONFIG_PARTICIPANT,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 0,
-	.rate_offset = 25,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * SSI is in L3 management domain, its direct parent is core not l3,
- * many core power domain entities are grouped into the L3 clock
- * domain.
- * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK
- *
- * ssr = core/1/2/3/4/5, sst = 1/2 ssr.
- */
-static struct clk ssi_ssr_sst_fck = {
-	.name		= "ssi_fck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,	/* bit 1 */
-	.enable_bit	= 1,
-	.rate_offset = 20,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * GFX clock domain
- *	Clocks:
- * GFX_FCLK, GFX_ICLK
- * GFX_CG1(2d), GFX_CG2(3d)
- *
- * GFX_FCLK runs from L3, and is divided by (1,2,3,4)
- * The 2d and 3d clocks run at a hardware determined
- * divided value of fclk.
- *
- */
-static struct clk gfx_3d_fck = {
-	.name		= "gfx_3d_fck",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_GFX_SEL1,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_GFX,
-	.enable_bit	= 2,
-	.rate_offset= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gfx_2d_fck = {
-	.name		= "gfx_2d_fck",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_GFX_SEL1,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_GFX,
-	.enable_bit	= 1,
-	.rate_offset= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gfx_ick = {
-	.name		= "gfx_ick",		/* From l3 */
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_GFX,	/* bit 0 */
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-/*
- * Modem clock domain (2430)
- *	CLOCKS:
- *		MDM_OSC_CLK
- *		MDM_ICLK
- */
-static struct clk mdm_ick = {		/* used both as a ick and fck */
-	.name		= "mdm_ick",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP243X | RATE_CKCTL | CM_MODEM_SEL1 |
-				DELAYED_APP | CONFIG_PARTICIPANT,
-	.rate_offset	= 0,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_MDM,
-	.enable_bit	= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mdm_osc_ck = {
-	.name		= "mdm_osc_ck",
-	.rate		= 26000000,
-	.parent		= &osc_ck,
-	.flags		= CLOCK_IN_OMAP243X | RATE_FIXED,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_MDM,
-	.enable_bit	= 1,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-/*
- * L4 clock management domain
- *
- * This domain contains lots of interface clocks from the L4 interface, some
- * functional clocks.	Fixed APLL functional source clocks are managed in
- * this domain.
- */
-static struct clk l4_ck = {		/* used both as an ick and fck */
-	.name		= "l4_ck",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 |
-				DELAYED_APP | RATE_PROPAGATES,
-	.rate_offset	= 5,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk ssi_l4_ick = {
-	.name		= "ssi_l4_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,	/* bit 1 */
-	.enable_bit	= 1,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-/*
- * DSS clock domain
- * CLOCKs:
- * DSS_L4_ICLK, DSS_L3_ICLK,
- * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK
- *
- * DSS is both initiator and target.
- */
-static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
-	.name		= "dss_ick",
-	.parent		= &l4_ck,	/* really both l3 and l4 */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk dss1_fck = {
-	.name		= "dss1_fck",
-	.parent		= &core_ck,		/* Core or sys */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 0,
-	.rate_offset	= 8,
-	.src_offset	= 8,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk dss2_fck = {		/* Alt clk used in power management */
-	.name		= "dss2_fck",
-	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_CORE_SEL1 | RATE_FIXED |
-				DELAYED_APP,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 1,
-	.src_offset	= 13,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk dss_54m_fck = {	/* Alt clk used in power management */
-	.name		= "dss_54m_fck",	/* 54m tv clk */
-	.parent		= &func_54m_ck,
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_propagate_rate,
-};
-
-/*
- * CORE power domain ICLK & FCLK defines.
- * Many of the these can have more than one possible parent. Entries
- * here will likely have an L4 interface parent, and may have multiple
- * functional clock parents.
- */
-static struct clk gpt1_ick = {
-	.name		= "gpt1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,	/* Bit0 */
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt1_fck = {
-	.name		= "gpt1_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_WKUP_SEL1,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_WKUP,	/* Bit0 */
-	.enable_bit	= 0,
-	.src_offset	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt2_ick = {
-	.name		= "gpt2_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	/* Bit4 */
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt2_fck = {
-	.name		= "gpt2_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 4,
-	.src_offset	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt3_ick = {
-	.name		= "gpt3_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	/* Bit5 */
-	.enable_bit	= 5,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt3_fck = {
-	.name		= "gpt3_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 5,
-	.src_offset	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt4_ick = {
-	.name		= "gpt4_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	/* Bit6 */
-	.enable_bit	= 6,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt4_fck = {
-	.name		= "gpt4_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 6,
-	.src_offset	= 6,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt5_ick = {
-	.name		= "gpt5_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* Bit7 */
-	.enable_bit	= 7,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt5_fck = {
-	.name		= "gpt5_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 7,
-	.src_offset	= 8,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt6_ick = {
-	.name		= "gpt6_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 8,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit8 */
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt6_fck = {
-	.name		= "gpt6_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 8,
-	.src_offset	= 10,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt7_ick = {
-	.name		= "gpt7_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit9 */
-	.enable_bit	= 9,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt7_fck = {
-	.name		= "gpt7_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 9,
-	.src_offset	= 12,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt8_ick = {
-	.name		= "gpt8_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit10 */
-	.enable_bit	= 10,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt8_fck = {
-	.name		= "gpt8_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 10,
-	.src_offset	= 14,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt9_ick = {
-	.name		= "gpt9_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 11,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt9_fck = {
-	.name		= "gpt9_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-					CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 11,
-	.src_offset	= 16,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt10_ick = {
-	.name		= "gpt10_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 12,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt10_fck = {
-	.name		= "gpt10_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-					CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 12,
-	.src_offset	= 18,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt11_ick = {
-	.name		= "gpt11_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 13,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt11_fck = {
-	.name		= "gpt11_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-					CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 13,
-	.src_offset	= 20,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt12_ick = {
-	.name		= "gpt12_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit14 */
-	.enable_bit	= 14,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt12_fck = {
-	.name		= "gpt12_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-					CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 14,
-	.src_offset	= 22,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp1_ick = {
-	.name		= "mcbsp1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 15,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit16 */
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp1_fck = {
-	.name		= "mcbsp1_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 15,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp2_ick = {
-	.name		= "mcbsp2_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 16,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp2_fck = {
-	.name		= "mcbsp2_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 16,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp3_ick = {
-	.name		= "mcbsp3_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp3_fck = {
-	.name		= "mcbsp3_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp4_ick = {
-	.name		= "mcbsp4_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp4_fck = {
-	.name		= "mcbsp4_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp5_ick = {
-	.name		= "mcbsp5_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 5,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp5_fck = {
-	.name		= "mcbsp5_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 5,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi1_ick = {
-	.name		= "mcspi_ick",
-	.id		= 1,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 17,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi1_fck = {
-	.name		= "mcspi_fck",
-	.id		= 1,
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 17,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi2_ick = {
-	.name		= "mcspi_ick",
-	.id		= 2,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 18,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi2_fck = {
-	.name		= "mcspi_fck",
-	.id		= 2,
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 18,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi3_ick = {
-	.name		= "mcspi_ick",
-	.id		= 3,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 9,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi3_fck = {
-	.name		= "mcspi_fck",
-	.id		= 3,
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 9,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart1_ick = {
-	.name		= "uart1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 21,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart1_fck = {
-	.name		= "uart1_fck",
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 21,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart2_ick = {
-	.name		= "uart2_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 22,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart2_fck = {
-	.name		= "uart2_fck",
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 22,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart3_ick = {
-	.name		= "uart3_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart3_fck = {
-	.name		= "uart3_fck",
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpios_ick = {
-	.name		= "gpios_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpios_fck = {
-	.name		= "gpios_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_WKUP,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mpu_wdt_ick = {
-	.name		= "mpu_wdt_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mpu_wdt_fck = {
-	.name		= "mpu_wdt_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_WKUP,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk sync_32k_ick = {
-	.name		= "sync_32k_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 1,
-	.recalc		= &omap2_followparent_recalc,
-};
-static struct clk wdt1_ick = {
-	.name		= "wdt1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-static struct clk omapctrl_ick = {
-	.name		= "omapctrl_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 5,
-	.recalc		= &omap2_followparent_recalc,
-};
-static struct clk icr_ick = {
-	.name		= "icr_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 6,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk cam_ick = {
-	.name		= "cam_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 31,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk cam_fck = {
-	.name		= "cam_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 31,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mailboxes_ick = {
-	.name		= "mailboxes_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 30,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk wdt4_ick = {
-	.name		= "wdt4_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 29,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk wdt4_fck = {
-	.name		= "wdt4_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 29,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk wdt3_ick = {
-	.name		= "wdt3_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 28,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk wdt3_fck = {
-	.name		= "wdt3_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 28,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mspro_ick = {
-	.name		= "mspro_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 27,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mspro_fck = {
-	.name		= "mspro_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 27,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmc_ick = {
-	.name		= "mmc_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 26,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmc_fck = {
-	.name		= "mmc_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 26,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk fac_ick = {
-	.name		= "fac_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 25,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk fac_fck = {
-	.name		= "fac_fck",
-	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 25,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk eac_ick = {
-	.name		= "eac_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 24,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk eac_fck = {
-	.name		= "eac_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 24,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk hdq_ick = {
-	.name		= "hdq_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 23,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk hdq_fck = {
-	.name		= "hdq_fck",
-	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 23,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2c2_ick = {
-	.name		= "i2c_ick",
-	.id		= 2,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 20,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2c2_fck = {
-	.name		= "i2c_fck",
-	.id		= 2,
-	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 20,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2chs2_fck = {
-	.name		= "i2chs2_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 20,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2c1_ick = {
-	.name		= "i2c_ick",
-	.id		= 1,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 19,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2c1_fck = {
-	.name		= "i2c_fck",
-	.id		= 1,
-	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 19,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2chs1_fck = {
-	.name		= "i2chs1_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 19,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk vlynq_ick = {
-	.name		= "vlynq_ick",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk vlynq_fck = {
-	.name		= "vlynq_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X  | RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 3,
-	.src_offset	= 15,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk sdrc_ick = {
-	.name		= "sdrc_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN3_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk des_ick = {
-	.name		= "des_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk sha_ick = {
-	.name		= "sha_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 1,
-	.recalc		= &omap2_followparent_recalc,
-};
+#include <asm/arch/clock.h>
 
-static struct clk rng_ick = {
-	.name		= "rng_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
+/* The maximum error between a target DPLL rate and the rounded rate in Hz */
+#define DEFAULT_DPLL_RATE_TOLERANCE	50000
 
-static struct clk aes_ick = {
-	.name		= "aes_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
+int omap2_clk_enable(struct clk *clk);
+void omap2_clk_disable(struct clk *clk);
+long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
+int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
+int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
+int omap2_dpll_rate_tolerance_set(struct clk *clk, unsigned int tolerance);
+long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate);
 
-static struct clk pka_ick = {
-	.name		= "pka_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk usb_fck = {
-	.name		= "usb_fck",
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk usbhs_ick = {
-	.name		= "usbhs_ick",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 6,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmchs1_ick = {
-	.name		= "mmchs1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 7,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmchs1_fck = {
-	.name		= "mmchs1_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 7,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmchs2_ick = {
-	.name		= "mmchs2_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 8,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmchs2_fck = {
-	.name		= "mmchs2_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 8,
-	.recalc		= &omap2_followparent_recalc,
-};
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+void omap2_clk_disable_unused(struct clk *clk);
+#else
+#define omap2_clk_disable_unused	NULL
+#endif
 
-static struct clk gpio5_ick = {
-	.name		= "gpio5_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 10,
-	.recalc		= &omap2_followparent_recalc,
-};
+void omap2_clksel_recalc(struct clk *clk);
+void omap2_init_clksel_parent(struct clk *clk);
+u32 omap2_clksel_get_divisor(struct clk *clk);
+u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
+				u32 *new_div);
+u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val);
+u32 omap2_divisor_to_clksel(struct clk *clk, u32 div);
+void omap2_fixed_divisor_recalc(struct clk *clk);
+long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
+int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
+u32 omap2_get_dpll_rate(struct clk *clk);
+int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
+void omap2_clk_prepare_for_reboot(void);
 
-static struct clk gpio5_fck = {
-	.name		= "gpio5_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 10,
-	.recalc		= &omap2_followparent_recalc,
-};
+extern u8 cpu_mask;
 
-static struct clk mdm_intc_ick = {
-	.name		= "mdm_intc_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 11,
-	.recalc		= &omap2_followparent_recalc,
+/* clksel_rate data common to 24xx/343x */
+static const struct clksel_rate gpt_32k_rates[] = {
+	 { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	 { .div = 0 }
 };
 
-static struct clk mmchsdb1_fck = {
-	.name		= "mmchsdb1_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 16,
-	.recalc		= &omap2_followparent_recalc,
+static const struct clksel_rate gpt_sys_rates[] = {
+	 { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	 { .div = 0 }
 };
 
-static struct clk mmchsdb2_fck = {
-	.name		= "mmchsdb2_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 17,
-	.recalc		= &omap2_followparent_recalc,
+static const struct clksel_rate gfx_l3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X },
+	{ .div = 0 }
 };
 
-/*
- * This clock is a composite clock which does entire set changes then
- * forces a rebalance. It keys on the MPU speed, but it really could
- * be any key speed part of a set in the rate table.
- *
- * to really change a set, you need memory table sets which get changed
- * in sram, pre-notifiers & post notifiers, changing the top set, without
- * having low level display recalc's won't work... this is why dpm notifiers
- * work, isr's off, walk a list of clocks already _off_ and not messing with
- * the bus.
- *
- * This clock should have no parent. It embodies the entire upper level
- * active set. A parent will mess up some of the init also.
- */
-static struct clk virt_prcm_set = {
-	.name		= "virt_prcm_set",
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP,
-	.parent		= &mpu_ck,	/* Indexed by mpu speed, no parent */
-	.recalc		= &omap2_mpu_recalc,	/* sets are keyed on mpu rate */
-	.set_rate	= &omap2_select_table_rate,
-	.round_rate	= &omap2_round_to_table_rate,
-};
-
-static struct clk *onchip_clks[] = {
-	/* external root sources */
-	&func_32k_ck,
-	&osc_ck,
-	&sys_ck,
-	&alt_ck,
-	/* internal analog sources */
-	&dpll_ck,
-	&apll96_ck,
-	&apll54_ck,
-	/* internal prcm root sources */
-	&func_54m_ck,
-	&core_ck,
-	&sleep_ck,
-	&func_96m_ck,
-	&func_48m_ck,
-	&func_12m_ck,
-	&wdt1_osc_ck,
-	&sys_clkout,
-	&sys_clkout2,
-	&emul_ck,
-	/* mpu domain clocks */
-	&mpu_ck,
-	/* dsp domain clocks */
-	&iva2_1_fck,		/* 2430 */
-	&iva2_1_ick,
-	&dsp_ick,		/* 2420 */
-	&dsp_fck,
-	&iva1_ifck,
-	&iva1_mpu_int_ifck,
-	/* GFX domain clocks */
-	&gfx_3d_fck,
-	&gfx_2d_fck,
-	&gfx_ick,
-	/* Modem domain clocks */
-	&mdm_ick,
-	&mdm_osc_ck,
-	/* DSS domain clocks */
-	&dss_ick,
-	&dss1_fck,
-	&dss2_fck,
-	&dss_54m_fck,
-	/* L3 domain clocks */
-	&core_l3_ck,
-	&ssi_ssr_sst_fck,
-	&usb_l4_ick,
-	/* L4 domain clocks */
-	&l4_ck,			/* used as both core_l4 and wu_l4 */
-	&ssi_l4_ick,
-	/* virtual meta-group clock */
-	&virt_prcm_set,
-	/* general l4 interface ck, multi-parent functional clk */
-	&gpt1_ick,
-	&gpt1_fck,
-	&gpt2_ick,
-	&gpt2_fck,
-	&gpt3_ick,
-	&gpt3_fck,
-	&gpt4_ick,
-	&gpt4_fck,
-	&gpt5_ick,
-	&gpt5_fck,
-	&gpt6_ick,
-	&gpt6_fck,
-	&gpt7_ick,
-	&gpt7_fck,
-	&gpt8_ick,
-	&gpt8_fck,
-	&gpt9_ick,
-	&gpt9_fck,
-	&gpt10_ick,
-	&gpt10_fck,
-	&gpt11_ick,
-	&gpt11_fck,
-	&gpt12_ick,
-	&gpt12_fck,
-	&mcbsp1_ick,
-	&mcbsp1_fck,
-	&mcbsp2_ick,
-	&mcbsp2_fck,
-	&mcbsp3_ick,
-	&mcbsp3_fck,
-	&mcbsp4_ick,
-	&mcbsp4_fck,
-	&mcbsp5_ick,
-	&mcbsp5_fck,
-	&mcspi1_ick,
-	&mcspi1_fck,
-	&mcspi2_ick,
-	&mcspi2_fck,
-	&mcspi3_ick,
-	&mcspi3_fck,
-	&uart1_ick,
-	&uart1_fck,
-	&uart2_ick,
-	&uart2_fck,
-	&uart3_ick,
-	&uart3_fck,
-	&gpios_ick,
-	&gpios_fck,
-	&mpu_wdt_ick,
-	&mpu_wdt_fck,
-	&sync_32k_ick,
-	&wdt1_ick,
-	&omapctrl_ick,
-	&icr_ick,
-	&cam_fck,
-	&cam_ick,
-	&mailboxes_ick,
-	&wdt4_ick,
-	&wdt4_fck,
-	&wdt3_ick,
-	&wdt3_fck,
-	&mspro_ick,
-	&mspro_fck,
-	&mmc_ick,
-	&mmc_fck,
-	&fac_ick,
-	&fac_fck,
-	&eac_ick,
-	&eac_fck,
-	&hdq_ick,
-	&hdq_fck,
-	&i2c1_ick,
-	&i2c1_fck,
-	&i2chs1_fck,
-	&i2c2_ick,
-	&i2c2_fck,
-	&i2chs2_fck,
-	&vlynq_ick,
-	&vlynq_fck,
-	&sdrc_ick,
-	&des_ick,
-	&sha_ick,
-	&rng_ick,
-	&aes_ick,
-	&pka_ick,
-	&usb_fck,
-	&usbhs_ick,
-	&mmchs1_ick,
-	&mmchs1_fck,
-	&mmchs2_ick,
-	&mmchs2_fck,
-	&gpio5_ick,
-	&gpio5_fck,
-	&mdm_intc_ick,
-	&mmchsdb1_fck,
-	&mmchsdb2_fck,
-};
 
 #endif