X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blobdiff_plain;f=Documentation%2Fvideo4linux%2Fzc0301.txt;h=b41c83cf09f4addd31dbd6dc8ba95ffd51633896;hp=f55262c6733b6c75eba2da87405462288a53e485;hb=6e4b26805a90b6682dd4ea0fd426dcda8ca5164a;hpb=12df7556705aae97f24a397377e17898700d7192 diff --git a/Documentation/video4linux/zc0301.txt b/Documentation/video4linux/zc0301.txt index f55262c6733b..b41c83cf09f4 100644 --- a/Documentation/video4linux/zc0301.txt +++ b/Documentation/video4linux/zc0301.txt @@ -1,9 +1,9 @@ - ZC0301 Image Processor and Control Chip - Driver for Linux - ======================================= + ZC0301 and ZC0301P Image Processor and Control Chip + Driver for Linux + =================================================== - - Documentation - + - Documentation - Index @@ -23,7 +23,7 @@ Index 1. Copyright ============ -Copyright (C) 2006 by Luca Risolia +Copyright (C) 2006-2007 by Luca Risolia 2. Disclaimer @@ -51,13 +51,13 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 4. Overview and features ======================== -This driver supports the video interface of the devices mounting the ZC0301 -Image Processor and Control Chip. +This driver supports the video interface of the devices mounting the ZC0301 or +ZC0301P Image Processors and Control Chips. The driver relies on the Video4Linux2 and USB core modules. It has been designed to run properly on SMP systems as well. -The latest version of the ZC0301 driver can be found at the following URL: +The latest version of the ZC0301[P] driver can be found at the following URL: http://www.linux-projects.org/ Some of the features of the driver are: @@ -117,7 +117,7 @@ supported by the USB Audio driver thanks to the ALSA API: And finally: - # USB Multimedia devices + # V4L USB devices # CONFIG_USB_ZC0301=m @@ -125,8 +125,9 @@ And finally: 6. Module loading ================= To use the driver, it is necessary to load the "zc0301" module into memory -after every other module required: "videodev", "usbcore" and, depending on -the USB host controller you have, "ehci-hcd", "uhci-hcd" or "ohci-hcd". +after every other module required: "videodev", "v4l2_common", "compat_ioctl32", +"usbcore" and, depending on the USB host controller you have, "ehci-hcd", +"uhci-hcd" or "ohci-hcd". Loading can be done as shown below: @@ -146,46 +147,46 @@ Name: video_nr Type: short array (min = 0, max = 64) Syntax: <-1|n[,...]> Description: Specify V4L2 minor mode number: - -1 = use next available - n = use minor number n - You can specify up to 64 cameras this way. - For example: - video_nr=-1,2,-1 would assign minor number 2 to the second - registered camera and use auto for the first one and for every - other camera. + -1 = use next available + n = use minor number n + You can specify up to 64 cameras this way. + For example: + video_nr=-1,2,-1 would assign minor number 2 to the second + registered camera and use auto for the first one and for every + other camera. Default: -1 ------------------------------------------------------------------------------- Name: force_munmap Type: bool array (min = 0, max = 64) Syntax: <0|1[,...]> Description: Force the application to unmap previously mapped buffer memory - before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not - all the applications support this feature. This parameter is - specific for each detected camera. - 0 = do not force memory unmapping - 1 = force memory unmapping (save memory) + before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not + all the applications support this feature. This parameter is + specific for each detected camera. + 0 = do not force memory unmapping + 1 = force memory unmapping (save memory) Default: 0 ------------------------------------------------------------------------------- Name: frame_timeout Type: uint array (min = 0, max = 64) Syntax: Description: Timeout for a video frame in seconds. This parameter is - specific for each detected camera. This parameter can be - changed at runtime thanks to the /sys filesystem interface. + specific for each detected camera. This parameter can be + changed at runtime thanks to the /sys filesystem interface. Default: 2 ------------------------------------------------------------------------------- Name: debug Type: ushort Syntax: Description: Debugging information level, from 0 to 3: - 0 = none (use carefully) - 1 = critical errors - 2 = significant informations - 3 = more verbose messages - Level 3 is useful for testing only, when only one device - is used at the same time. It also shows some more informations - about the hardware being detected. This module parameter can be - changed at runtime thanks to the /sys filesystem interface. + 0 = none (use carefully) + 1 = critical errors + 2 = significant information + 3 = more verbose messages + Level 3 is useful for testing only, when only one device + is used at the same time. It also shows some information + about the hardware being detected. This module parameter can be + changed at runtime thanks to the /sys filesystem interface. Default: 2 ------------------------------------------------------------------------------- @@ -204,11 +205,24 @@ Vendor ID Product ID 0x041e 0x4017 0x041e 0x401c 0x041e 0x401e +0x041e 0x401f +0x041e 0x4022 0x041e 0x4034 0x041e 0x4035 +0x041e 0x4036 +0x041e 0x403a +0x0458 0x7007 +0x0458 0x700c +0x0458 0x700f 0x046d 0x08ae +0x055f 0xd003 +0x055f 0xd004 0x0ac8 0x0301 +0x0ac8 0x301b +0x0ac8 0x303b +0x10fd 0x0128 0x10fd 0x8050 +0x10fd 0x804e The list above does not imply that all those devices work with this driver: up until now only the ones that mount the following image sensors are supported; @@ -217,6 +231,7 @@ kernel messages will always tell you whether this is the case: Model Manufacturer ----- ------------ PAS202BCB PixArt Imaging, Inc. +PB-0330 Photobit Corporation 9. Notes for V4L2 application developers @@ -246,9 +261,10 @@ the fingerprint is: '88E8 F32F 7244 68BA 3958 5D40 99DA 5D2A FCE6 35A4'. 11. Credits =========== -- Informations about the chip internals needed to enable the I2C protocol have +- Information about the chip internals needed to enable the I2C protocol have been taken from the documentation of the ZC030x Video4Linux1 driver written by Andrew Birkett ; - The initialization values of the ZC0301 controller connected to the PAS202BCB - image sensor have been taken from the SPCA5XX driver maintained by - Michel Xhaard . + and PB-0330 image sensors have been taken from the SPCA5XX driver maintained + by Michel Xhaard ; +- Stanislav Lechev donated one camera.