depends on !UML
default y
+config HAVE_IRQ_WORK
+ bool
+
+config IRQ_WORK
+ bool
+ depends on HAVE_IRQ_WORK
+
menu "General setup"
config EXPERIMENTAL
config LOCK_KERNEL
bool
- depends on SMP || PREEMPT
+ depends on (SMP || PREEMPT) && BKL
default y
config INIT_ENV_ARG_LIMIT
depends on HAVE_KERNEL_LZO
help
Its compression ratio is the poorest among the 4. The kernel
- size is about about 10% bigger than gzip; however its speed
+ size is about 10% bigger than gzip; however its speed
(both compression and decompression) is the fastest.
endchoice
depends on AUDITSYSCALL
select FSNOTIFY
+source "kernel/irq/Kconfig"
+
menu "RCU Subsystem"
choice
Accept the default if unsure.
+config SRCU_SYNCHRONIZE_DELAY
+ int "Microseconds to delay before waiting for readers"
+ range 0 20
+ default 10
+ help
+ This option controls how long SRCU delays before entering its
+ loop waiting on SRCU readers. The purpose of this loop is
+ to avoid the unconditional context-switch penalty that would
+ otherwise be incurred if there was an active SRCU reader,
+ in a manner similar to adaptive locking schemes. This should
+ be set to be a bit longer than the common-case SRCU read-side
+ critical-section overhead.
+
+ Accept the default if unsure.
+
endmenu # "RCU Subsystem"
config IKCONFIG
config CGROUP_DEBUG
bool "Example debug cgroup subsystem"
- depends on CGROUPS
default n
help
This option enables a simple cgroup subsystem that
config CGROUP_NS
bool "Namespace cgroup subsystem"
- depends on CGROUPS
help
Provides a simple namespace cgroup subsystem to
provide hierarchical naming of sets of namespaces,
config CGROUP_FREEZER
bool "Freezer cgroup subsystem"
- depends on CGROUPS
help
Provides a way to freeze and unfreeze all tasks in a
cgroup.
config CGROUP_DEVICE
bool "Device controller for cgroups"
- depends on CGROUPS && EXPERIMENTAL
help
Provides a cgroup implementing whitelists for devices which
a process in the cgroup can mknod or open.
config CPUSETS
bool "Cpuset support"
- depends on CGROUPS
help
This option will let you create and manage CPUSETs which
allow dynamically partitioning a system into sets of CPUs and
config CGROUP_CPUACCT
bool "Simple CPU accounting cgroup subsystem"
- depends on CGROUPS
help
Provides a simple Resource Controller for monitoring the
total CPU consumed by the tasks in a cgroup.
help
This option enables controller independent resource accounting
infrastructure that works with cgroups.
- depends on CGROUPS
config CGROUP_MEM_RES_CTLR
bool "Memory Resource Controller for Control Groups"
- depends on CGROUPS && RESOURCE_COUNTERS
+ depends on RESOURCE_COUNTERS
select MM_OWNER
help
Provides a memory resource controller that manages both anonymous
if boot option "noswapaccount" is set, swap will not be accounted.
Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page
size is 4096bytes, 512k per 1Gbytes of swap.
+config CGROUP_MEM_RES_CTLR_SWAP_ENABLED
+ bool "Memory Resource Controller Swap Extension enabled by default"
+ depends on CGROUP_MEM_RES_CTLR_SWAP
+ default y
+ help
+ Memory Resource Controller Swap Extension comes with its price in
+ a bigger memory consumption. General purpose distribution kernels
+ which want to enable the feautre but keep it disabled by default
+ and let the user enable it by swapaccount boot command line
+ parameter should have this option unselected.
+ For those who want to have the feature enabled by default should
+ select this option (if, for some reason, they need to disable it
+ then noswapaccount does the trick).
menuconfig CGROUP_SCHED
bool "Group CPU scheduler"
- depends on EXPERIMENTAL && CGROUPS
+ depends on EXPERIMENTAL
default n
help
This feature lets CPU scheduler recognize task groups and control CPU
config BLK_CGROUP
tristate "Block IO controller"
- depends on CGROUPS && BLOCK
+ depends on BLOCK
default n
---help---
Generic block IO controller cgroup interface. This is the common
Currently, CFQ IO scheduler uses it to recognize task groups and
control disk bandwidth allocation (proportional time slice allocation)
- to such task groups.
+ to such task groups. It is also used by bio throttling logic in
+ block layer to implement upper limit in IO rates on a device.
This option only enables generic Block IO controller infrastructure.
- One needs to also enable actual IO controlling logic in CFQ for it
- to take effect. (CONFIG_CFQ_GROUP_IOSCHED=y).
+ One needs to also enable actual IO controlling logic/policy. For
+ enabling proportional weight division of disk bandwidth in CFQ seti
+ CONFIG_CFQ_GROUP_IOSCHED=y and for enabling throttling policy set
+ CONFIG_BLK_THROTTLE=y.
See Documentation/cgroups/blkio-controller.txt for more information.
endif # CGROUPS
-config MM_OWNER
- bool
-
-config SYSFS_DEPRECATED
- bool
-
-config SYSFS_DEPRECATED_V2
- bool "enable deprecated sysfs features to support old userspace tools"
- depends on SYSFS
- default n
- select SYSFS_DEPRECATED
- help
- This option switches the layout of sysfs to the deprecated
- version. Do not use it on recent distributions.
-
- The current sysfs layout features a unified device tree at
- /sys/devices/, which is able to express a hierarchy between
- class devices. If the deprecated option is set to Y, the
- unified device tree is split into a bus device tree at
- /sys/devices/ and several individual class device trees at
- /sys/class/. The class and bus devices will be connected by
- "<subsystem>:<name>" and the "device" links. The "block"
- class devices, will not show up in /sys/class/block/. Some
- subsystems will suppress the creation of some devices which
- depend on the unified device tree.
-
- This option is not a pure compatibility option that can
- be safely enabled on newer distributions. It will change the
- layout of sysfs to the non-extensible deprecated version,
- and disable some features, which can not be exported without
- confusing older userspace tools. Since 2007/2008 all major
- distributions do not enable this option, and ship no tools which
- depend on the deprecated layout or this option.
-
- If you are using a new kernel on an older distribution, or use
- older userspace tools, you might need to say Y here. Do not say Y,
- if the original kernel, that came with your distribution, has
- this option set to N.
-
-config RELAY
- bool "Kernel->user space relay support (formerly relayfs)"
- help
- This option enables support for relay interface support in
- certain file systems (such as debugfs).
- It is designed to provide an efficient mechanism for tools and
- facilities to relay large amounts of data from kernel space to
- user space.
-
- If unsure, say N.
-
-config NAMESPACES
+menuconfig NAMESPACES
bool "Namespaces support" if EMBEDDED
default !EMBEDDED
help
or same user id or pid may refer to different tasks when used in
different namespaces.
+if NAMESPACES
+
config UTS_NS
bool "UTS namespace"
- depends on NAMESPACES
+ default y
help
In this namespace tasks see different info provided with the
uname() system call
config IPC_NS
bool "IPC namespace"
- depends on NAMESPACES && (SYSVIPC || POSIX_MQUEUE)
+ depends on (SYSVIPC || POSIX_MQUEUE)
+ default y
help
In this namespace tasks work with IPC ids which correspond to
different IPC objects in different namespaces.
config USER_NS
bool "User namespace (EXPERIMENTAL)"
- depends on NAMESPACES && EXPERIMENTAL
+ depends on EXPERIMENTAL
+ default y
help
This allows containers, i.e. vservers, to use user namespaces
to provide different user info for different servers.
If unsure, say N.
config PID_NS
- bool "PID Namespaces (EXPERIMENTAL)"
- default n
- depends on NAMESPACES && EXPERIMENTAL
+ bool "PID Namespaces"
+ default y
help
Support process id namespaces. This allows having multiple
processes with the same pid as long as they are in different
pid namespaces. This is a building block of containers.
- Unless you want to work with an experimental feature
- say N here.
-
config NET_NS
bool "Network namespace"
- default n
- depends on NAMESPACES && EXPERIMENTAL && NET
+ depends on NET
+ default y
help
Allow user space to create what appear to be multiple instances
of the network stack.
+endif # NAMESPACES
+
+config MM_OWNER
+ bool
+
+config SYSFS_DEPRECATED
+ bool "enable deprecated sysfs features to support old userspace tools"
+ depends on SYSFS
+ default n
+ help
+ This option adds code that switches the layout of the "block" class
+ devices, to not show up in /sys/class/block/, but only in
+ /sys/block/.
+
+ This switch is only active when the sysfs.deprecated=1 boot option is
+ passed or the SYSFS_DEPRECATED_V2 option is set.
+
+ This option allows new kernels to run on old distributions and tools,
+ which might get confused by /sys/class/block/. Since 2007/2008 all
+ major distributions and tools handle this just fine.
+
+ Recent distributions and userspace tools after 2009/2010 depend on
+ the existence of /sys/class/block/, and will not work with this
+ option enabled.
+
+ Only if you are using a new kernel on an old distribution, you might
+ need to say Y here.
+
+config SYSFS_DEPRECATED_V2
+ bool "enabled deprecated sysfs features by default"
+ default n
+ depends on SYSFS
+ depends on SYSFS_DEPRECATED
+ help
+ Enable deprecated sysfs by default.
+
+ See the CONFIG_SYSFS_DEPRECATED option for more details about this
+ option.
+
+ Only if you are using a new kernel on an old distribution, you might
+ need to say Y here. Even then, odds are you would not need it
+ enabled, you can always pass the boot option if absolutely necessary.
+
+config RELAY
+ bool "Kernel->user space relay support (formerly relayfs)"
+ help
+ This option enables support for relay interface support in
+ certain file systems (such as debugfs).
+ It is designed to provide an efficient mechanism for tools and
+ facilities to relay large amounts of data from kernel space to
+ user space.
+
+ If unsure, say N.
+
config BLK_DEV_INITRD
bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
depends on BROKEN || !FRV
default y if (PROFILING || PERF_COUNTERS)
depends on HAVE_PERF_EVENTS
select ANON_INODES
+ select IRQ_WORK
help
Enable kernel support for various performance events provided
by software and hardware.
git.openpandora.org / pandora-kernel.git / blobdiff