#define EV_PWR 0x16
#define EV_FF_STATUS 0x17
#define EV_MAX 0x1f
+#define EV_CNT (EV_MAX+1)
/*
* Synchronization events.
#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */
#define KEY_DISPLAY_OFF 245 /* display device to off state */
+#define KEY_WIMAX 246
+
#define BTN_MISC 0x100
#define BTN_0 0x100
#define BTN_1 0x101
#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
#define KEY_LOGOFF 0x1b1 /* AL Logoff */
+#define KEY_DOLLAR 0x1b2
+#define KEY_EURO 0x1b3
+
+#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
+#define KEY_FRAMEFORWARD 0x1b5
+
+#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
+
#define KEY_DEL_EOL 0x1c0
#define KEY_DEL_EOS 0x1c1
#define KEY_INS_LINE 0x1c2
/* We avoid low common keys in module aliases so they don't get huge. */
#define KEY_MIN_INTERESTING KEY_MUTE
#define KEY_MAX 0x1ff
+#define KEY_CNT (KEY_MAX+1)
/*
* Relative axes
#define REL_WHEEL 0x08
#define REL_MISC 0x09
#define REL_MAX 0x0f
+#define REL_CNT (REL_MAX+1)
/*
* Absolute axes
#define ABS_VOLUME 0x20
#define ABS_MISC 0x28
#define ABS_MAX 0x3f
+#define ABS_CNT (ABS_MAX+1)
/*
* Switch events
#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
#define SW_RADIO 0x03 /* set = radio enabled */
#define SW_MAX 0x0f
+#define SW_CNT (SW_MAX+1)
/*
* Misc events
#define MSC_RAW 0x03
#define MSC_SCAN 0x04
#define MSC_MAX 0x07
+#define MSC_CNT (MSC_MAX+1)
/*
* LEDs
#define LED_MAIL 0x09
#define LED_CHARGING 0x0a
#define LED_MAX 0x0f
+#define LED_CNT (LED_MAX+1)
/*
* Autorepeat values
#define SND_BELL 0x01
#define SND_TONE 0x02
#define SND_MAX 0x07
+#define SND_CNT (SND_MAX+1)
/*
* IDs.
* defining effect parameters
*
* This structure is sent through ioctl from the application to the driver.
- * To create a new effect aplication should set its @id to -1; the kernel
+ * To create a new effect application should set its @id to -1; the kernel
* will return assigned @id which can later be used to update or delete
* this effect.
*
#define FF_AUTOCENTER 0x61
#define FF_MAX 0x7f
+#define FF_CNT (FF_MAX+1)
#ifdef __KERNEL__
#include <linux/timer.h>
#include <linux/mod_devicetable.h>
-#define NBITS(x) (((x)/BITS_PER_LONG)+1)
-#define BIT(x) (1UL<<((x)%BITS_PER_LONG))
-#define LONG(x) ((x)/BITS_PER_LONG)
-
+/**
+ * struct input_dev - represents an input device
+ * @name: name of the device
+ * @phys: physical path to the device in the system hierarchy
+ * @uniq: unique identification code for the device (if device has it)
+ * @id: id of the device (struct input_id)
+ * @evbit: bitmap of types of events supported by the device (EV_KEY,
+ * EV_REL, etc.)
+ * @keybit: bitmap of keys/buttons this device has
+ * @relbit: bitmap of relative axes for the device
+ * @absbit: bitmap of absolute axes for the device
+ * @mscbit: bitmap of miscellaneous events supported by the device
+ * @ledbit: bitmap of leds present on the device
+ * @sndbit: bitmap of sound effects supported by the device
+ * @ffbit: bitmap of force feedback effects supported by the device
+ * @swbit: bitmap of switches present on the device
+ * @keycodemax: size of keycode table
+ * @keycodesize: size of elements in keycode table
+ * @keycode: map of scancodes to keycodes for this device
+ * @setkeycode: optional method to alter current keymap, used to implement
+ * sparse keymaps. If not supplied default mechanism will be used
+ * @getkeycode: optional method to retrieve current keymap. If not supplied
+ * default mechanism will be used
+ * @ff: force feedback structure associated with the device if device
+ * supports force feedback effects
+ * @repeat_key: stores key code of the last key pressed; used to implement
+ * software autorepeat
+ * @timer: timer for software autorepeat
+ * @sync: set to 1 when there were no new events since last EV_SYNC
+ * @abs: current values for reports from absolute axes
+ * @rep: current values for autorepeat parameters (delay, rate)
+ * @key: reflects current state of device's keys/buttons
+ * @led: reflects current state of device's LEDs
+ * @snd: reflects current state of sound effects
+ * @sw: reflects current state of device's switches
+ * @absmax: maximum values for events coming from absolute axes
+ * @absmin: minimum values for events coming from absolute axes
+ * @absfuzz: describes noisiness for axes
+ * @absflat: size of the center flat position (used by joydev)
+ * @open: this method is called when the very first user calls
+ * input_open_device(). The driver must prepare the device
+ * to start generating events (start polling thread,
+ * request an IRQ, submit URB, etc.)
+ * @close: this method is called when the very last user calls
+ * input_close_device().
+ * @flush: purges the device. Most commonly used to get rid of force
+ * feedback effects loaded into the device when disconnecting
+ * from it
+ * @event: event handler for events sent _to_ the device, like EV_LED
+ * or EV_SND. The device is expected to carry out the requested
+ * action (turn on a LED, play sound, etc.) The call is protected
+ * by @event_lock and must not sleep
+ * @grab: input handle that currently has the device grabbed (via
+ * EVIOCGRAB ioctl). When a handle grabs a device it becomes sole
+ * recipient for all input events coming from the device
+ * @event_lock: this spinlock is is taken when input core receives
+ * and processes a new event for the device (in input_event()).
+ * Code that accesses and/or modifies parameters of a device
+ * (such as keymap or absmin, absmax, absfuzz, etc.) after device
+ * has been registered with input core must take this lock.
+ * @mutex: serializes calls to open(), close() and flush() methods
+ * @users: stores number of users (input handlers) that opened this
+ * device. It is used by input_open_device() and input_close_device()
+ * to make sure that dev->open() is only called when the first
+ * user opens device and dev->close() is called when the very
+ * last user closes the device
+ * @going_away: marks devices that are in a middle of unregistering and
+ * causes input_open_device*() fail with -ENODEV.
+ * @dev: driver model's view of this device
+ * @h_list: list of input handles associated with the device. When
+ * accessing the list dev->mutex must be held
+ * @node: used to place the device onto input_dev_list
+ */
struct input_dev {
-
- void *private;
+ /* private: */
+ void *private; /* do not use */
+ /* public: */
const char *name;
const char *phys;
const char *uniq;
struct input_id id;
- unsigned long evbit[NBITS(EV_MAX)];
- unsigned long keybit[NBITS(KEY_MAX)];
- unsigned long relbit[NBITS(REL_MAX)];
- unsigned long absbit[NBITS(ABS_MAX)];
- unsigned long mscbit[NBITS(MSC_MAX)];
- unsigned long ledbit[NBITS(LED_MAX)];
- unsigned long sndbit[NBITS(SND_MAX)];
- unsigned long ffbit[NBITS(FF_MAX)];
- unsigned long swbit[NBITS(SW_MAX)];
+ unsigned long evbit[BITS_TO_LONGS(EV_CNT)];
+ unsigned long keybit[BITS_TO_LONGS(KEY_CNT)];
+ unsigned long relbit[BITS_TO_LONGS(REL_CNT)];
+ unsigned long absbit[BITS_TO_LONGS(ABS_CNT)];
+ unsigned long mscbit[BITS_TO_LONGS(MSC_CNT)];
+ unsigned long ledbit[BITS_TO_LONGS(LED_CNT)];
+ unsigned long sndbit[BITS_TO_LONGS(SND_CNT)];
+ unsigned long ffbit[BITS_TO_LONGS(FF_CNT)];
+ unsigned long swbit[BITS_TO_LONGS(SW_CNT)];
unsigned int keycodemax;
unsigned int keycodesize;
unsigned int repeat_key;
struct timer_list timer;
- int state;
-
int sync;
int abs[ABS_MAX + 1];
int rep[REP_MAX + 1];
- unsigned long key[NBITS(KEY_MAX)];
- unsigned long led[NBITS(LED_MAX)];
- unsigned long snd[NBITS(SND_MAX)];
- unsigned long sw[NBITS(SW_MAX)];
+ unsigned long key[BITS_TO_LONGS(KEY_CNT)];
+ unsigned long led[BITS_TO_LONGS(LED_CNT)];
+ unsigned long snd[BITS_TO_LONGS(SND_CNT)];
+ unsigned long sw[BITS_TO_LONGS(SW_CNT)];
int absmax[ABS_MAX + 1];
int absmin[ABS_MAX + 1];
struct input_handle *grab;
- struct mutex mutex; /* serializes open and close operations */
+ spinlock_t event_lock;
+ struct mutex mutex;
+
unsigned int users;
+ int going_away;
struct device dev;
- union { /* temporarily so while we switching to struct device */
- struct device *dev;
- } cdev;
struct list_head h_list;
struct list_head node;
/**
* struct input_handler - implements one of interfaces for input devices
* @private: driver-specific data
- * @event: event handler
+ * @event: event handler. This method is being called by input core with
+ * interrupts disabled and dev->event_lock spinlock held and so
+ * it may not sleep
* @connect: called when attaching a handler to an input device
* @disconnect: disconnects a handler from input device
* @start: starts handler for given handle. This function is called by
* @name: name of the handler, to be shown in /proc/bus/input/handlers
* @id_table: pointer to a table of input_device_ids this driver can
* handle
- * @blacklist: prointer to a table of input_device_ids this driver should
+ * @blacklist: pointer to a table of input_device_ids this driver should
* ignore even if they match @id_table
* @h_list: list of input handles associated with the handler
* @node: for placing the driver onto input_handler_list
+ *
+ * Input handlers attach to input devices and create input handles. There
+ * are likely several handlers attached to any given input device at the
+ * same time. All of them will get their copy of input event generated by
+ * the device.
+ *
+ * Note that input core serializes calls to connect() and disconnect()
+ * methods.
*/
struct input_handler {
struct list_head node;
};
+/**
+ * struct input_handle - links input device with an input handler
+ * @private: handler-specific data
+ * @open: counter showing whether the handle is 'open', i.e. should deliver
+ * events from its device
+ * @name: name given to the handle by handler that created it
+ * @dev: input device the handle is attached to
+ * @handler: handler that works with the device through this handle
+ * @d_node: used to put the handle on device's list of attached handles
+ * @h_node: used to put the handle on handler's list of handles from which
+ * it gets events
+ */
struct input_handle {
void *private;
dev->private = data;
}
-int input_register_device(struct input_dev *);
+int __must_check input_register_device(struct input_dev *);
void input_unregister_device(struct input_dev *);
-int input_register_handler(struct input_handler *);
+int __must_check input_register_handler(struct input_handler *);
void input_unregister_handler(struct input_handler *);
int input_register_handle(struct input_handle *);
dev->absfuzz[axis] = fuzz;
dev->absflat[axis] = flat;
- dev->absbit[LONG(axis)] |= BIT(axis);
+ dev->absbit[BIT_WORD(axis)] |= BIT_MASK(axis);
}
+int input_get_keycode(struct input_dev *dev, int scancode, int *keycode);
+int input_set_keycode(struct input_dev *dev, int scancode, int keycode);
+
extern struct class input_class;
/**
* @max_effects: maximum number of effects supported by device
* @effects: pointer to an array of effects currently loaded into device
* @effect_owners: array of effect owners; when file handle owning
- * an effect gets closed the effcet is automatically erased
+ * an effect gets closed the effect is automatically erased
*
* Every force-feedback device must implement upload() and playback()
* methods; erase() is optional. set_gain() and set_autocenter() need
void *private;
- unsigned long ffbit[NBITS(FF_MAX)];
+ unsigned long ffbit[BITS_TO_LONGS(FF_CNT)];
struct mutex mutex;
git.openpandora.org / pandora-kernel.git / blobdiff