tristate
default n
+config VIDEO_OUTPUT_CONTROL
+ tristate "Lowlevel video output switch controls"
+ default m
+ help
+ This framework adds support for low-level control of the video
+ output switch.
+
config FB
tristate "Support for frame buffer devices"
---help---
This is the frame buffer device driver for the CGsix (GX, TurboGX)
frame buffer.
+config FB_FFB
+ bool "Creator/Creator3D/Elite3D support"
+ depends on FB_SBUS && SPARC64
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Creator, Creator3D,
+ and Elite3D graphics boards.
+
+config FB_TCX
+ bool "TCX (SS4/SS5 only) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the TCX 24/8bit frame
+ buffer.
+
+config FB_CG14
+ bool "CGfourteen (SX) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the CGfourteen frame
+ buffer on Desktop SPARCsystems with the SX graphics option.
+
+config FB_P9100
+ bool "P9100 (Sparcbook 3 only) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the P9100 card
+ supported on Sparcbook 3 machines.
+
+config FB_LEO
+ bool "Leo (ZX) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the SBUS-based Sun ZX
+ (leo) frame buffer cards.
+
+config FB_IGA
+ bool "IGA 168x display support"
+ depends on (FB = y) && SPARC32
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the INTERGRAPHICS 1680 and
+ successor frame buffer cards.
+
+config FB_XVR500
+ bool "Sun XVR-500 3DLABS Wildcat support"
+ depends on (FB = y) && PCI && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-500 and similar
+ graphics cards based upon the 3DLABS Wildcat chipset. The driver
+ only works on sparc64 systems where the system firwmare has
+ mostly initialized the card already. It is treated as a
+ completely dumb framebuffer device.
+
+config FB_XVR2500
+ bool "Sun XVR-2500 3DLABS Wildcat support"
+ depends on (FB = y) && PCI && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-2500 and similar
+ graphics cards based upon the 3DLABS Wildcat chipset. The driver
+ only works on sparc64 systems where the system firwmare has
+ mostly initialized the card already. It is treated as a
+ completely dumb framebuffer device.
+
config FB_PVR2
tristate "NEC PowerVR 2 display support"
depends on FB && SH_DREAMCAST
config FB_EPSON1355
bool "Epson 1355 framebuffer support"
- depends on (FB = y) && (SUPERH || ARCH_CEIVA)
+ depends on (FB = y) && ARCH_CEIVA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
to let frame buffer in external SDRAM.
+config FB_ATMEL_STN
+ bool "Use a STN display with AT91/AT32 LCD Controller"
+ depends on FB_ATMEL && MACH_AT91SAM9261EK
+ default n
+ help
+ Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
+ Controller. Say N if you want to connect a TFT.
+
+ If unsure, say N.
+
config FB_NVIDIA
tristate "nVidia Framebuffer Support"
depends on FB && PCI
config FB_ATY_CT
bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
depends on PCI && FB_ATY
- default y if SPARC64 && FB_PCI
+ default y if SPARC64 && PCI
help
Say Y here to support use of ATI's 64-bit Rage boards (or other
boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
source "drivers/video/geode/Kconfig"
-config FB_FFB
- bool "Creator/Creator3D/Elite3D support"
- depends on FB_SBUS && SPARC64
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the Creator, Creator3D,
- and Elite3D graphics boards.
-
-config FB_TCX
- bool "TCX (SS4/SS5 only) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the TCX 24/8bit frame
- buffer.
-
-config FB_CG14
- bool "CGfourteen (SX) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the CGfourteen frame
- buffer on Desktop SPARCsystems with the SX graphics option.
-
-config FB_P9100
- bool "P9100 (Sparcbook 3 only) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the P9100 card
- supported on Sparcbook 3 machines.
-
-config FB_LEO
- bool "Leo (ZX) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the SBUS-based Sun ZX
- (leo) frame buffer cards.
-
-config FB_XVR500
- bool "Sun XVR-500 3DLABS Wildcat support"
- depends on FB && PCI && SPARC64
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for the Sun XVR-500 and similar
- graphics cards based upon the 3DLABS Wildcat chipset. The driver
- only works on sparc64 systems where the system firwmare has
- mostly initialized the card already. It is treated as a
- completely dumb framebuffer device.
-
-config FB_XVR2500
- bool "Sun XVR-2500 3DLABS Wildcat support"
- depends on FB && PCI && SPARC64
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for the Sun XVR-2500 and similar
- graphics cards based upon the 3DLABS Wildcat chipset. The driver
- only works on sparc64 systems where the system firwmare has
- mostly initialized the card already. It is treated as a
- completely dumb framebuffer device.
-
-config FB_PCI
- bool "PCI framebuffers"
- depends on (FB = y) && PCI && SPARC
-
-config FB_IGA
- bool "IGA 168x display support"
- depends on SPARC32 && FB_PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for the INTERGRAPHICS 1680 and
- successor frame buffer cards.
-
config FB_HIT
tristate "HD64461 Frame Buffer support"
depends on FB && HD64461
adaptor, found on some IBM System P (pSeries) machines.
config FB_PS3
- bool "PS3 GPU framebuffer driver"
- depends on (FB = y) && PS3_PS3AV
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
+ tristate "PS3 GPU framebuffer driver"
+ depends on FB && PS3_PS3AV
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
---help---
Include support for the virtual frame buffer in the PS3 platform.
config FB_PS3_DEFAULT_SIZE_M
int "PS3 default frame buffer size (in MiB)"
depends on FB_PS3
- default 18
+ default 9
---help---
This is the default size (in MiB) of the virtual frame buffer in
the PS3.
framebuffer. ML300 carries a 640*480 LCD display on the board,
ML403 uses a standard DB15 VGA connector.
+if ARCH_OMAP
+ source "drivers/video/omap/Kconfig"
+endif
+
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
depends on FB
git.openpandora.org / pandora-kernel.git / blobdiff