#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/serial.h>
+#include <linux/swab.h>
#include <linux/kfifo.h>
#include <linux/ioctl.h>
#include <linux/firmware.h>
int close_pending;
int lsr_event;
struct async_icount icount;
- wait_queue_head_t delta_msr_wait; /* for handling sleeping while
- waiting for msr change to
- happen */
struct edgeport_serial *edge_serial;
struct usb_serial_port *port;
__u8 bUartMode; /* Port type, 0: RS232, etc. */
{
int status = 0;
__u8 read_length;
- __be16 be_start_address;
+ u16 be_start_address;
dbg("%s - @ %x for %d", __func__, start_address, length);
dbg("%s - @ %x for %d", __func__,
start_address, read_length);
}
- be_start_address = cpu_to_be16(start_address);
+ /*
+ * NOTE: Must use swab as wIndex is sent in little-endian
+ * byte order regardless of host byte order.
+ */
+ be_start_address = swab16((u16)start_address);
status = ti_vread_sync(dev, UMPC_MEMORY_READ,
(__u16)address_type,
- (__force __u16)be_start_address,
+ be_start_address,
buffer, read_length);
if (status) {
{
int status = 0;
int write_length;
- __be16 be_start_address;
+ u16 be_start_address;
/* We can only send a maximum of 1 aligned byte page at a time */
usb_serial_debug_data(debug, &serial->serial->dev->dev,
__func__, write_length, buffer);
- /* Write first page */
- be_start_address = cpu_to_be16(start_address);
+ /*
+ * Write first page.
+ *
+ * NOTE: Must use swab as wIndex is sent in little-endian byte order
+ * regardless of host byte order.
+ */
+ be_start_address = swab16((u16)start_address);
status = ti_vsend_sync(serial->serial->dev,
UMPC_MEMORY_WRITE, (__u16)address_type,
- (__force __u16)be_start_address,
+ be_start_address,
buffer, write_length);
if (status) {
dbg("%s - ERROR %d", __func__, status);
usb_serial_debug_data(debug, &serial->serial->dev->dev,
__func__, write_length, buffer);
- /* Write next page */
- be_start_address = cpu_to_be16(start_address);
+ /*
+ * Write next page.
+ *
+ * NOTE: Must use swab as wIndex is sent in little-endian byte
+ * order regardless of host byte order.
+ */
+ be_start_address = swab16((u16)start_address);
status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE,
(__u16)address_type,
- (__force __u16)be_start_address,
+ be_start_address,
buffer, write_length);
if (status) {
dev_err(&serial->serial->dev->dev, "%s - ERROR %d\n",
wait_queue_t wait;
unsigned long flags;
+ if (!tty)
+ return;
+
if (!timeout)
timeout = (HZ * EDGE_CLOSING_WAIT)/100;
if (rom_desc->Type == desc_type)
return start_address;
- start_address = start_address + sizeof(struct ti_i2c_desc)
- + rom_desc->Size;
+ start_address = start_address + sizeof(struct ti_i2c_desc) +
+ le16_to_cpu(rom_desc->Size);
} while ((start_address < TI_MAX_I2C_SIZE) && rom_desc->Type);
__u16 i;
__u8 cs = 0;
- for (i = 0; i < rom_desc->Size; i++)
+ for (i = 0; i < le16_to_cpu(rom_desc->Size); i++)
cs = (__u8)(cs + buffer[i]);
if (cs != rom_desc->CheckSum) {
break;
if ((start_address + sizeof(struct ti_i2c_desc) +
- rom_desc->Size) > TI_MAX_I2C_SIZE) {
+ le16_to_cpu(rom_desc->Size)) > TI_MAX_I2C_SIZE) {
status = -ENODEV;
dbg("%s - structure too big, erroring out.", __func__);
break;
/* Read the descriptor data */
status = read_rom(serial, start_address +
sizeof(struct ti_i2c_desc),
- rom_desc->Size, buffer);
+ le16_to_cpu(rom_desc->Size),
+ buffer);
if (status)
break;
break;
}
start_address = start_address + sizeof(struct ti_i2c_desc) +
- rom_desc->Size;
+ le16_to_cpu(rom_desc->Size);
} while ((rom_desc->Type != I2C_DESC_TYPE_ION) &&
(start_address < TI_MAX_I2C_SIZE));
/* Read the descriptor data */
status = read_rom(serial, start_address+sizeof(struct ti_i2c_desc),
- rom_desc->Size, buffer);
+ le16_to_cpu(rom_desc->Size), buffer);
if (status)
goto exit;
firmware_rec = (struct ti_i2c_firmware_rec*)i2c_header->Data;
i2c_header->Type = I2C_DESC_TYPE_FIRMWARE_BLANK;
- i2c_header->Size = (__u16)buffer_size;
+ i2c_header->Size = cpu_to_le16(buffer_size);
i2c_header->CheckSum = cs;
firmware_rec->Ver_Major = OperationalMajorVersion;
firmware_rec->Ver_Minor = OperationalMinorVersion;
icount->dcd++;
if (msr & EDGEPORT_MSR_DELTA_RI)
icount->rng++;
- wake_up_interruptible(&edge_port->delta_msr_wait);
+ wake_up_interruptible(&edge_port->port->delta_msr_wait);
}
/* Save the new modem status */
dev = port->serial->dev;
memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount));
- init_waitqueue_head(&edge_port->delta_msr_wait);
/* turn off loopback */
status = ti_do_config(edge_port, UMPC_SET_CLR_LOOPBACK, 0);
dbg("%s - (%d) TIOCMIWAIT", __func__, port->number);
cprev = edge_port->icount;
while (1) {
- interruptible_sleep_on(&edge_port->delta_msr_wait);
+ interruptible_sleep_on(&port->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
+
+ if (port->serial->disconnected)
+ return -EIO;
+
cnow = edge_port->icount;
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
dev = serial->dev;
+ /* Make sure we have the required endpoints when in download mode. */
+ if (serial->interface->cur_altsetting->desc.bNumEndpoints > 1) {
+ if (serial->num_bulk_in < serial->num_ports ||
+ serial->num_bulk_out < serial->num_ports)
+ return -ENODEV;
+ }
+
/* create our private serial structure */
edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
if (edge_serial == NULL) {
static void edge_disconnect(struct usb_serial *serial)
{
- int i;
- struct edgeport_port *edge_port;
-
dbg("%s", __func__);
-
- for (i = 0; i < serial->num_ports; ++i) {
- edge_port = usb_get_serial_port_data(serial->port[i]);
- edge_remove_sysfs_attrs(edge_port->port);
- }
}
static void edge_release(struct usb_serial *serial)
.disconnect = edge_disconnect,
.release = edge_release,
.port_probe = edge_create_sysfs_attrs,
+ .port_remove = edge_remove_sysfs_attrs,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.disconnect = edge_disconnect,
.release = edge_release,
.port_probe = edge_create_sysfs_attrs,
+ .port_remove = edge_remove_sysfs_attrs,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
.tiocmset = edge_tiocmset,
+ .get_icount = edge_get_icount,
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
git.openpandora.org / pandora-kernel.git / blobdiff