struct usb_serial_port *port);
static void cp210x_get_termios_port(struct usb_serial_port *port,
unsigned int *cflagp, unsigned int *baudp);
+static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
+ struct ktermios *);
static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
struct ktermios*);
static int cp210x_tiocmget(struct tty_struct *);
unsigned int, unsigned int);
static void cp210x_break_ctl(struct tty_struct *, int);
static int cp210x_startup(struct usb_serial *);
+static void cp210x_release(struct usb_serial *);
static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
static int debug;
{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
{ USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
+ { USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
+ { USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */
{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
{ USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
{ USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
{ USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
+ { USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */
{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
+ { USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */
{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+ { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
+ { USB_DEVICE(0x10C4, 0x81A9) }, /* Multiplex RC Interface */
{ USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
{ USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
+ { USB_DEVICE(0x10C4, 0x81D7) }, /* IAI Corp. RCB-CV-USB USB to RS485 Adaptor */
{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
{ USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
+ { USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */
{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
+ { USB_DEVICE(0x10C4, 0x82F4) }, /* Starizona MicroTouch */
{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
{ USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
+ { USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */
{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
+ { USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */
{ USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
{ USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
+ { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
+ { USB_DEVICE(0x10C4, 0x8856) }, /* CEL EM357 ZigBee USB Stick - LR */
+ { USB_DEVICE(0x10C4, 0x8857) }, /* CEL EM357 ZigBee USB Stick */
+ { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
+ { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
+ { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
+ { USB_DEVICE(0x10C4, 0x8962) }, /* Brim Brothers charging dock */
+ { USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */
+ { USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
+ { USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+ { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
{ USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
{ USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
{ USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
{ USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
+ { USB_DEVICE(0x12B8, 0xEC60) }, /* Link G4 ECU */
+ { USB_DEVICE(0x12B8, 0xEC62) }, /* Link G4+ ECU */
{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
+ { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
+ { USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */
{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
+ { USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */
+ { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
+ { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
+ { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
+ { USB_DEVICE(0x16C0, 0x09B0) }, /* Lunatico Seletek */
+ { USB_DEVICE(0x16C0, 0x09B1) }, /* Lunatico Seletek */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
{ USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
+ { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
+ { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+ { USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */
+ { USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
+ { USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
+ { USB_DEVICE(0x1901, 0x0194) }, /* GE Healthcare Remote Alarm Box */
+ { USB_DEVICE(0x1901, 0x0195) }, /* GE B850/B650/B450 CP2104 DP UART interface */
+ { USB_DEVICE(0x1901, 0x0196) }, /* GE B850 CP2105 DP UART interface */
+ { USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
+ { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
+ { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
+ { USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+ { USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */
+ { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
+ { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
+ { USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
+ { USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */
+ { USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */
+ { USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */
+ { USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */
+ { USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */
+ { USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */
+ { USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */
+ { USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
+ { USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
+ { USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
+ { USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */
+ { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
+ { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
+ { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
{ } /* Terminating Entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
+struct cp210x_port_private {
+ __u8 bInterfaceNumber;
+};
+
static struct usb_driver cp210x_driver = {
.name = "cp210x",
.probe = usb_serial_probe,
.tiocmget = cp210x_tiocmget,
.tiocmset = cp210x_tiocmset,
.attach = cp210x_startup,
+ .release = cp210x_release,
.dtr_rts = cp210x_dtr_rts
};
#define CP210X_EMBED_EVENTS 0x15
#define CP210X_GET_EVENTSTATE 0x16
#define CP210X_SET_CHARS 0x19
+#define CP210X_GET_BAUDRATE 0x1D
+#define CP210X_SET_BAUDRATE 0x1E
/* CP210X_IFC_ENABLE */
#define UART_ENABLE 0x0001
unsigned int *data, int size)
{
struct usb_serial *serial = port->serial;
+ struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
__le32 *buf;
int result, i, length;
/* Issue the request, attempting to read 'size' bytes */
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
request, REQTYPE_DEVICE_TO_HOST, 0x0000,
- 0, buf, size, 300);
+ port_priv->bInterfaceNumber, buf, size,
+ USB_CTRL_GET_TIMEOUT);
/* Convert data into an array of integers */
for (i = 0; i < length; i++)
unsigned int *data, int size)
{
struct usb_serial *serial = port->serial;
+ struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
__le32 *buf;
int result, i, length;
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
request, REQTYPE_HOST_TO_DEVICE, 0x0000,
- 0, buf, size, 300);
+ port_priv->bInterfaceNumber, buf, size,
+ USB_CTRL_SET_TIMEOUT);
} else {
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
request, REQTYPE_HOST_TO_DEVICE, data[0],
- 0, NULL, 0, 300);
+ port_priv->bInterfaceNumber, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
}
kfree(buf);
* Quantises the baud rate as per AN205 Table 1
*/
static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
- if (baud <= 56) baud = 0;
- else if (baud <= 300) baud = 300;
+ if (baud <= 300)
+ baud = 300;
else if (baud <= 600) baud = 600;
else if (baud <= 1200) baud = 1200;
else if (baud <= 1800) baud = 1800;
else if (baud <= 491520) baud = 460800;
else if (baud <= 567138) baud = 500000;
else if (baud <= 670254) baud = 576000;
- else if (baud <= 1053257) baud = 921600;
- else if (baud <= 1474560) baud = 1228800;
- else if (baud <= 2457600) baud = 1843200;
- else baud = 3686400;
+ else if (baud < 1000000)
+ baud = 921600;
+ else if (baud > 2000000)
+ baud = 2000000;
return baud;
}
static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
{
- int result;
-
dbg("%s - port %d", __func__, port->number);
if (cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) {
return -EPROTO;
}
- result = usb_serial_generic_open(tty, port);
- if (result)
- return result;
-
/* Configure the termios structure */
cp210x_get_termios(tty, port);
- return 0;
+
+ /* The baud rate must be initialised on cp2104 */
+ if (tty)
+ cp210x_change_speed(tty, port, NULL);
+
+ return usb_serial_generic_open(tty, port);
}
static void cp210x_close(struct usb_serial_port *port)
dbg("%s - port %d", __func__, port->number);
- cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2);
- /* Convert to baudrate */
- if (baud)
- baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
+ cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4);
dbg("%s - baud rate = %d", __func__, baud);
*baudp = baud;
*cflagp = cflag;
}
+/*
+ * CP2101 supports the following baud rates:
+ *
+ * 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800,
+ * 38400, 56000, 57600, 115200, 128000, 230400, 460800, 921600
+ *
+ * CP2102 and CP2103 support the following additional rates:
+ *
+ * 4000, 16000, 51200, 64000, 76800, 153600, 250000, 256000, 500000,
+ * 576000
+ *
+ * The device will map a requested rate to a supported one, but the result
+ * of requests for rates greater than 1053257 is undefined (see AN205).
+ *
+ * CP2104, CP2105 and CP2110 support most rates up to 2M, 921k and 1M baud,
+ * respectively, with an error less than 1%. The actual rates are determined
+ * by
+ *
+ * div = round(freq / (2 x prescale x request))
+ * actual = freq / (2 x prescale x div)
+ *
+ * For CP2104 and CP2105 freq is 48Mhz and prescale is 4 for request <= 365bps
+ * or 1 otherwise.
+ * For CP2110 freq is 24Mhz and prescale is 4 for request <= 300bps or 1
+ * otherwise.
+ */
+static void cp210x_change_speed(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios)
+{
+ u32 baud;
+
+ baud = tty->termios->c_ospeed;
+
+ /* This maps the requested rate to a rate valid on cp2102 or cp2103,
+ * or to an arbitrary rate in [1M,2M].
+ *
+ * NOTE: B0 is not implemented.
+ */
+ baud = cp210x_quantise_baudrate(baud);
+
+ dbg("%s - setting baud rate to %u", __func__, baud);
+ if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud,
+ sizeof(baud))) {
+ dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
+ if (old_termios)
+ baud = old_termios->c_ospeed;
+ else
+ baud = 9600;
+ }
+
+ tty_encode_baud_rate(tty, baud, baud);
+}
+
static void cp210x_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
unsigned int cflag, old_cflag;
- unsigned int baud = 0, bits;
+ unsigned int bits;
unsigned int modem_ctl[4];
dbg("%s - port %d", __func__, port->number);
tty->termios->c_cflag &= ~CMSPAR;
cflag = tty->termios->c_cflag;
old_cflag = old_termios->c_cflag;
- baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty));
-
- /* If the baud rate is to be updated*/
- if (baud != tty_termios_baud_rate(old_termios) && baud != 0) {
- dbg("%s - Setting baud rate to %d baud", __func__,
- baud);
- if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
- ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
- dbg("Baud rate requested not supported by device");
- baud = tty_termios_baud_rate(old_termios);
- }
- }
- /* Report back the resulting baud rate */
- tty_encode_baud_rate(tty, baud, baud);
+
+ if (tty->termios->c_ospeed != old_termios->c_ospeed)
+ cp210x_change_speed(tty, port, old_termios);
/* If the number of data bits is to be updated */
if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
static int cp210x_startup(struct usb_serial *serial)
{
+ struct cp210x_port_private *port_priv;
+ int i;
+
/* cp210x buffers behave strangely unless device is reset */
usb_reset_device(serial->dev);
+
+ for (i = 0; i < serial->num_ports; i++) {
+ port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
+ if (!port_priv)
+ return -ENOMEM;
+
+ memset(port_priv, 0x00, sizeof(*port_priv));
+ port_priv->bInterfaceNumber =
+ serial->interface->cur_altsetting->desc.bInterfaceNumber;
+
+ usb_set_serial_port_data(serial->port[i], port_priv);
+ }
+
return 0;
}
+static void cp210x_release(struct usb_serial *serial)
+{
+ struct cp210x_port_private *port_priv;
+ int i;
+
+ for (i = 0; i < serial->num_ports; i++) {
+ port_priv = usb_get_serial_port_data(serial->port[i]);
+ kfree(port_priv);
+ usb_set_serial_port_data(serial->port[i], NULL);
+ }
+}
+
static int __init cp210x_init(void)
{
int retval;
git.openpandora.org / pandora-kernel.git / blobdiff