*/
#include <linux/types.h>
+#include <linux/kconfig.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#define OHCI_INTRENABLE 0x10
#define OHCI_INTRDISABLE 0x14
#define OHCI_FMINTERVAL 0x34
+#define OHCI_HCFS (3 << 6) /* hc functional state */
#define OHCI_HCR (1 << 0) /* host controller reset */
#define OHCI_OCR (1 << 3) /* ownership change request */
#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
#define NB_PIF0_PWRDOWN_1 0x01100013
#define USB_INTEL_XUSB2PR 0xD0
+#define USB_INTEL_USB2PRM 0xD4
#define USB_INTEL_USB3_PSSEN 0xD8
+#define USB_INTEL_USB3PRM 0xDC
static struct amd_chipset_info {
struct pci_dev *nb_dev;
{
void __iomem *base;
u32 control;
+ u32 fminterval = 0;
+ bool no_fminterval = false;
+ int cnt;
if (!mmio_resource_enabled(pdev, 0))
return;
if (base == NULL)
return;
+ /*
+ * ULi M5237 OHCI controller locks the whole system when accessing
+ * the OHCI_FMINTERVAL offset.
+ */
+ if (pdev->vendor == PCI_VENDOR_ID_AL && pdev->device == 0x5237)
+ no_fminterval = true;
+
control = readl(base + OHCI_CONTROL);
/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
}
#endif
- /* reset controller, preserving RWC (and possibly IR) */
- writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
- readl(base + OHCI_CONTROL);
+ /* disable interrupts */
+ writel((u32) ~0, base + OHCI_INTRDISABLE);
- /* Some NVIDIA controllers stop working if kept in RESET for too long */
- if (pdev->vendor == PCI_VENDOR_ID_NVIDIA) {
- u32 fminterval;
- int cnt;
+ /* Reset the USB bus, if the controller isn't already in RESET */
+ if (control & OHCI_HCFS) {
+ /* Go into RESET, preserving RWC (and possibly IR) */
+ writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
+ readl(base + OHCI_CONTROL);
- /* drive reset for at least 50 ms (7.1.7.5) */
+ /* drive bus reset for at least 50 ms (7.1.7.5) */
msleep(50);
+ }
- /* software reset of the controller, preserving HcFmInterval */
+ /* software reset of the controller, preserving HcFmInterval */
+ if (!no_fminterval)
fminterval = readl(base + OHCI_FMINTERVAL);
- writel(OHCI_HCR, base + OHCI_CMDSTATUS);
- /* reset requires max 10 us delay */
- for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */
- if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0)
- break;
- udelay(1);
- }
- writel(fminterval, base + OHCI_FMINTERVAL);
+ writel(OHCI_HCR, base + OHCI_CMDSTATUS);
- /* Now we're in the SUSPEND state with all devices reset
- * and wakeups and interrupts disabled
- */
+ /* reset requires max 10 us delay */
+ for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */
+ if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0)
+ break;
+ udelay(1);
}
- /*
- * disable interrupts
- */
- writel(~(u32)0, base + OHCI_INTRDISABLE);
- writel(~(u32)0, base + OHCI_INTRSTATUS);
+ if (!no_fminterval)
+ writel(fminterval, base + OHCI_FMINTERVAL);
+ /* Now the controller is safely in SUSPEND and nothing can wake it up */
iounmap(base);
}
/* Pegatron Lucid (Ordissimo AIRIS) */
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "M11JB"),
- DMI_MATCH(DMI_BIOS_VERSION, "Lucid-GE-133"),
+ DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"),
+ },
+ },
+ {
+ /* Pegatron Lucid (Ordissimo) */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "Ordissimo"),
+ DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"),
+ },
+ },
+ {
+ /* HASEE E200 */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "HASEE"),
+ DMI_MATCH(DMI_BOARD_NAME, "E210"),
+ DMI_MATCH(DMI_BIOS_VERSION, "6.00"),
},
},
{ }
{
int try_handoff = 1, tried_handoff = 0;
- /* The Pegatron Lucid tablet sporadically waits for 98 seconds trying
- * the handoff on its unused controller. Skip it. */
- if (pdev->vendor == 0x8086 && pdev->device == 0x283a) {
+ /*
+ * The Pegatron Lucid tablet sporadically waits for 98 seconds trying
+ * the handoff on its unused controller. Skip it.
+ *
+ * The HASEE E200 hangs when the semaphore is set (bugzilla #77021).
+ */
+ if (pdev->vendor == 0x8086 && (pdev->device == 0x283a ||
+ pdev->device == 0x27cc)) {
if (dmi_check_system(ehci_dmi_nohandoff_table))
try_handoff = 0;
}
void __iomem *base, *op_reg_base;
u32 hcc_params, cap, val;
u8 offset, cap_length;
- int wait_time, delta, count = 256/4;
+ int wait_time, count = 256/4;
if (!mmio_resource_enabled(pdev, 0))
return;
writel(val, op_reg_base + EHCI_USBCMD);
wait_time = 2000;
- delta = 100;
do {
writel(0x3f, op_reg_base + EHCI_USBSTS);
- udelay(delta);
- wait_time -= delta;
+ udelay(100);
+ wait_time -= 100;
val = readl(op_reg_base + EHCI_USBSTS);
if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
break;
return -ETIMEDOUT;
}
-bool usb_is_intel_switchable_xhci(struct pci_dev *pdev)
+#define PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI 0x8C31
+#define PCI_DEVICE_ID_INTEL_LYNX_POINT_LP_XHCI 0x9C31
+
+bool usb_is_intel_ppt_switchable_xhci(struct pci_dev *pdev)
{
return pdev->class == PCI_CLASS_SERIAL_USB_XHCI &&
pdev->vendor == PCI_VENDOR_ID_INTEL &&
pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI;
}
+
+/* The Intel Lynx Point chipset also has switchable ports. */
+bool usb_is_intel_lpt_switchable_xhci(struct pci_dev *pdev)
+{
+ return pdev->class == PCI_CLASS_SERIAL_USB_XHCI &&
+ pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ (pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_LP_XHCI);
+}
+
+bool usb_is_intel_switchable_xhci(struct pci_dev *pdev)
+{
+ return usb_is_intel_ppt_switchable_xhci(pdev) ||
+ usb_is_intel_lpt_switchable_xhci(pdev);
+}
EXPORT_SYMBOL_GPL(usb_is_intel_switchable_xhci);
/*
{
u32 ports_available;
- ports_available = 0xffffffff;
+ /* Don't switchover the ports if the user hasn't compiled the xHCI
+ * driver. Otherwise they will see "dead" USB ports that don't power
+ * the devices.
+ */
+ if (!IS_ENABLED(CONFIG_USB_XHCI_HCD)) {
+ dev_warn(&xhci_pdev->dev,
+ "CONFIG_USB_XHCI_HCD is turned off, "
+ "defaulting to EHCI.\n");
+ dev_warn(&xhci_pdev->dev,
+ "USB 3.0 devices will work at USB 2.0 speeds.\n");
+ usb_disable_xhci_ports(xhci_pdev);
+ return;
+ }
+
+ /* Read USB3PRM, the USB 3.0 Port Routing Mask Register
+ * Indicate the ports that can be changed from OS.
+ */
+ pci_read_config_dword(xhci_pdev, USB_INTEL_USB3PRM,
+ &ports_available);
+
+ dev_dbg(&xhci_pdev->dev, "Configurable ports to enable SuperSpeed: 0x%x\n",
+ ports_available);
+
/* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable
- * Register, to turn on SuperSpeed terminations for all
- * available ports.
+ * Register, to turn on SuperSpeed terminations for the
+ * switchable ports.
*/
pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
cpu_to_le32(ports_available));
dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled "
"under xHCI: 0x%x\n", ports_available);
- ports_available = 0xffffffff;
+ /* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register
+ * Indicate the USB 2.0 ports to be controlled by the xHCI host.
+ */
+
+ pci_read_config_dword(xhci_pdev, USB_INTEL_USB2PRM,
+ &ports_available);
+
+ dev_dbg(&xhci_pdev->dev, "Configurable USB 2.0 ports to hand over to xCHI: 0x%x\n",
+ ports_available);
+
/* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to
* switch the USB 2.0 power and data lines over to the xHCI
* host.
}
EXPORT_SYMBOL_GPL(usb_enable_xhci_ports);
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev)
+{
+ pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0);
+ pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0);
+}
+EXPORT_SYMBOL_GPL(usb_disable_xhci_ports);
+
/**
* PCI Quirks for xHCI.
*
void __iomem *op_reg_base;
u32 val;
int timeout;
+ int len = pci_resource_len(pdev, 0);
if (!mmio_resource_enabled(pdev, 0))
return;
- base = ioremap_nocache(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
+ base = ioremap_nocache(pci_resource_start(pdev, 0), len);
if (base == NULL)
return;
*/
ext_cap_offset = xhci_find_next_cap_offset(base, XHCI_HCC_PARAMS_OFFSET);
do {
+ if ((ext_cap_offset + sizeof(val)) > len) {
+ /* We're reading garbage from the controller */
+ dev_warn(&pdev->dev,
+ "xHCI controller failing to respond");
+ return;
+ }
+
if (!ext_cap_offset)
/* We've reached the end of the extended capabilities */
goto hc_init;
+
val = readl(base + ext_cap_offset);
if (XHCI_EXT_CAPS_ID(val) == XHCI_EXT_CAPS_LEGACY)
break;
}
}
- /* Disable any BIOS SMIs */
- writel(XHCI_LEGACY_DISABLE_SMI,
- base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+ val = readl(base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+ /* Mask off (turn off) any enabled SMIs */
+ val &= XHCI_LEGACY_DISABLE_SMI;
+ /* Mask all SMI events bits, RW1C */
+ val |= XHCI_LEGACY_SMI_EVENTS;
+ /* Disable any BIOS SMIs and clear all SMI events*/
+ writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+hc_init:
if (usb_is_intel_switchable_xhci(pdev))
usb_enable_xhci_ports(pdev);
-hc_init:
+
op_reg_base = base + XHCI_HC_LENGTH(readl(base));
/* Wait for the host controller to be ready before writing any
static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
{
+ /* Skip Netlogic mips SoC's internal PCI USB controller.
+ * This device does not need/support EHCI/OHCI handoff
+ */
+ if (pdev->vendor == 0x184e) /* vendor Netlogic */
+ return;
+ if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
+ pdev->class != PCI_CLASS_SERIAL_USB_OHCI &&
+ pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&
+ pdev->class != PCI_CLASS_SERIAL_USB_XHCI)
+ return;
+
+ if (pci_enable_device(pdev) < 0) {
+ dev_warn(&pdev->dev, "Can't enable PCI device, "
+ "BIOS handoff failed.\n");
+ return;
+ }
if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
quirk_usb_handoff_uhci(pdev);
else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
quirk_usb_disable_ehci(pdev);
else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
quirk_usb_handoff_xhci(pdev);
+ pci_disable_device(pdev);
}
DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
git.openpandora.org / pandora-kernel.git / blobdiff