cfgno, inum, asnum, ep->desc.bEndpointAddress);
ep->ss_ep_comp.bmAttributes = 16;
} else if (usb_endpoint_xfer_isoc(&ep->desc) &&
- desc->bmAttributes > 2) {
+ USB_SS_MULT(desc->bmAttributes) > 3) {
dev_warn(ddev, "Isoc endpoint has Mult of %d in "
"config %d interface %d altsetting %d ep %d: "
- "setting to 3\n", desc->bmAttributes + 1,
+ "setting to 3\n",
+ USB_SS_MULT(desc->bmAttributes),
cfgno, inum, asnum, ep->desc.bEndpointAddress);
ep->ss_ep_comp.bmAttributes = 2;
}
if (usb_endpoint_xfer_isoc(&ep->desc))
- max_tx = (desc->bMaxBurst + 1) * (desc->bmAttributes + 1) *
+ max_tx = (desc->bMaxBurst + 1) *
+ (USB_SS_MULT(desc->bmAttributes)) *
usb_endpoint_maxp(&ep->desc);
else if (usb_endpoint_xfer_int(&ep->desc))
max_tx = usb_endpoint_maxp(&ep->desc) *
}
}
+static const unsigned short low_speed_maxpacket_maxes[4] = {
+ [USB_ENDPOINT_XFER_CONTROL] = 8,
+ [USB_ENDPOINT_XFER_ISOC] = 0,
+ [USB_ENDPOINT_XFER_BULK] = 0,
+ [USB_ENDPOINT_XFER_INT] = 8,
+};
+static const unsigned short full_speed_maxpacket_maxes[4] = {
+ [USB_ENDPOINT_XFER_CONTROL] = 64,
+ [USB_ENDPOINT_XFER_ISOC] = 1023,
+ [USB_ENDPOINT_XFER_BULK] = 64,
+ [USB_ENDPOINT_XFER_INT] = 64,
+};
+static const unsigned short high_speed_maxpacket_maxes[4] = {
+ [USB_ENDPOINT_XFER_CONTROL] = 64,
+ [USB_ENDPOINT_XFER_ISOC] = 1024,
+ [USB_ENDPOINT_XFER_BULK] = 512,
+ [USB_ENDPOINT_XFER_INT] = 1024,
+};
+static const unsigned short super_speed_maxpacket_maxes[4] = {
+ [USB_ENDPOINT_XFER_CONTROL] = 512,
+ [USB_ENDPOINT_XFER_ISOC] = 1024,
+ [USB_ENDPOINT_XFER_BULK] = 1024,
+ [USB_ENDPOINT_XFER_INT] = 1024,
+};
+
static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
int asnum, struct usb_host_interface *ifp, int num_ep,
unsigned char *buffer, int size)
struct usb_endpoint_descriptor *d;
struct usb_host_endpoint *endpoint;
int n, i, j, retval;
+ unsigned int maxp;
+ const unsigned short *maxpacket_maxes;
d = (struct usb_endpoint_descriptor *) buffer;
buffer += d->bLength;
memcpy(&endpoint->desc, d, n);
INIT_LIST_HEAD(&endpoint->urb_list);
- /* Fix up bInterval values outside the legal range. Use 32 ms if no
- * proper value can be guessed. */
+ /*
+ * Fix up bInterval values outside the legal range.
+ * Use 10 or 8 ms if no proper value can be guessed.
+ */
i = 0; /* i = min, j = max, n = default */
j = 255;
if (usb_endpoint_xfer_int(d)) {
switch (to_usb_device(ddev)->speed) {
case USB_SPEED_SUPER:
case USB_SPEED_HIGH:
- /* Many device manufacturers are using full-speed
+ /*
+ * Many device manufacturers are using full-speed
* bInterval values in high-speed interrupt endpoint
- * descriptors. Try to fix those and fall back to a
- * 32 ms default value otherwise. */
+ * descriptors. Try to fix those and fall back to an
+ * 8-ms default value otherwise.
+ */
n = fls(d->bInterval*8);
if (n == 0)
- n = 9; /* 32 ms = 2^(9-1) uframes */
+ n = 7; /* 8 ms = 2^(7-1) uframes */
j = 16;
+
+ /*
+ * Adjust bInterval for quirked devices.
+ * This quirk fixes bIntervals reported in
+ * linear microframes.
+ */
+ if (to_usb_device(ddev)->quirks &
+ USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL) {
+ n = clamp(fls(d->bInterval), i, j);
+ i = j = n;
+ }
break;
default: /* USB_SPEED_FULL or _LOW */
- /* For low-speed, 10 ms is the official minimum.
+ /*
+ * For low-speed, 10 ms is the official minimum.
* But some "overclocked" devices might want faster
- * polling so we'll allow it. */
- n = 32;
+ * polling so we'll allow it.
+ */
+ n = 10;
break;
}
} else if (usb_endpoint_xfer_isoc(d)) {
j = 16;
switch (to_usb_device(ddev)->speed) {
case USB_SPEED_HIGH:
- n = 9; /* 32 ms = 2^(9-1) uframes */
+ n = 7; /* 8 ms = 2^(7-1) uframes */
break;
default: /* USB_SPEED_FULL */
- n = 6; /* 32 ms = 2^(6-1) frames */
+ n = 4; /* 8 ms = 2^(4-1) frames */
break;
}
}
endpoint->desc.wMaxPacketSize = cpu_to_le16(8);
}
+ /* Validate the wMaxPacketSize field */
+ maxp = usb_endpoint_maxp(&endpoint->desc);
+
+ /* Find the highest legal maxpacket size for this endpoint */
+ i = 0; /* additional transactions per microframe */
+ switch (to_usb_device(ddev)->speed) {
+ case USB_SPEED_LOW:
+ maxpacket_maxes = low_speed_maxpacket_maxes;
+ break;
+ case USB_SPEED_FULL:
+ maxpacket_maxes = full_speed_maxpacket_maxes;
+ break;
+ case USB_SPEED_HIGH:
+ /* Bits 12..11 are allowed only for HS periodic endpoints */
+ if (usb_endpoint_xfer_int(d) || usb_endpoint_xfer_isoc(d)) {
+ i = maxp & (BIT(12) | BIT(11));
+ maxp &= ~i;
+ }
+ /* fallthrough */
+ default:
+ maxpacket_maxes = high_speed_maxpacket_maxes;
+ break;
+ case USB_SPEED_SUPER:
+ maxpacket_maxes = super_speed_maxpacket_maxes;
+ break;
+ }
+ j = maxpacket_maxes[usb_endpoint_type(&endpoint->desc)];
+
+ if (maxp > j) {
+ dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid maxpacket %d, setting to %d\n",
+ cfgno, inum, asnum, d->bEndpointAddress, maxp, j);
+ maxp = j;
+ endpoint->desc.wMaxPacketSize = cpu_to_le16(i | maxp);
+ }
+
/*
* Some buggy high speed devices have bulk endpoints using
* maxpacket sizes other than 512. High speed HCDs may not
*/
if (to_usb_device(ddev)->speed == USB_SPEED_HIGH
&& usb_endpoint_xfer_bulk(d)) {
- unsigned maxp;
-
- maxp = usb_endpoint_maxp(&endpoint->desc) & 0x07ff;
if (maxp != 512)
dev_warn(ddev, "config %d interface %d altsetting %d "
"bulk endpoint 0x%X has invalid maxpacket %d\n",
memcpy(&config->desc, buffer, USB_DT_CONFIG_SIZE);
if (config->desc.bDescriptorType != USB_DT_CONFIG ||
- config->desc.bLength < USB_DT_CONFIG_SIZE) {
+ config->desc.bLength < USB_DT_CONFIG_SIZE ||
+ config->desc.bLength > size) {
dev_err(ddev, "invalid descriptor for config index %d: "
"type = 0x%X, length = %d\n", cfgidx,
config->desc.bDescriptorType, config->desc.bLength);
result = -ENOMEM;
goto err;
}
+
+ if (dev->quirks & USB_QUIRK_DELAY_INIT)
+ msleep(100);
+
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
bigbuffer, length);
if (result < 0) {
git.openpandora.org / pandora-kernel.git / blobdiff