}
}
+int ata_scsi_device_resume(struct scsi_device *sdev)
+{
+ struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0];
+ struct ata_device *dev = &ap->device[sdev->id];
+
+ return ata_device_resume(ap, dev);
+}
+
+int ata_scsi_device_suspend(struct scsi_device *sdev)
+{
+ struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0];
+ struct ata_device *dev = &ap->device[sdev->id];
+
+ return ata_device_suspend(ap, dev);
+}
+
/**
* ata_to_sense_error - convert ATA error to SCSI error
* @id: ATA device number
int i;
/* Based on the 3ware driver translation table */
- static unsigned char sense_table[][4] = {
+ static const unsigned char sense_table[][4] = {
/* BBD|ECC|ID|MAR */
{0xd1, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command
/* BBD|ECC|ID */
{0x80, MEDIUM_ERROR, 0x11, 0x04}, // Block marked bad Medium error, unrecovered read error
{0xFF, 0xFF, 0xFF, 0xFF}, // END mark
};
- static unsigned char stat_table[][4] = {
+ static const unsigned char stat_table[][4] = {
/* Must be first because BUSY means no other bits valid */
{0x80, ABORTED_COMMAND, 0x47, 0x00}, // Busy, fake parity for now
{0x20, HARDWARE_ERROR, 0x00, 0x00}, // Device fault
if (dev->flags & ATA_DFLAG_LBA) {
tf->flags |= ATA_TFLAG_LBA;
- if (dev->flags & ATA_DFLAG_LBA48) {
- if (n_block > (64 * 1024))
- goto invalid_fld;
+ if (lba_28_ok(block, n_block)) {
+ /* use LBA28 */
+ tf->command = ATA_CMD_VERIFY;
+ tf->device |= (block >> 24) & 0xf;
+ } else if (lba_48_ok(block, n_block)) {
+ if (!(dev->flags & ATA_DFLAG_LBA48))
+ goto out_of_range;
/* use LBA48 */
tf->flags |= ATA_TFLAG_LBA48;
tf->hob_lbah = (block >> 40) & 0xff;
tf->hob_lbam = (block >> 32) & 0xff;
tf->hob_lbal = (block >> 24) & 0xff;
- } else {
- if (n_block > 256)
- goto invalid_fld;
-
- /* use LBA28 */
- tf->command = ATA_CMD_VERIFY;
-
- tf->device |= (block >> 24) & 0xf;
- }
+ } else
+ /* request too large even for LBA48 */
+ goto out_of_range;
tf->nsect = n_block & 0xff;
/* CHS */
u32 sect, head, cyl, track;
- if (n_block > 256)
- goto invalid_fld;
+ if (!lba_28_ok(block, n_block))
+ goto out_of_range;
/* Convert LBA to CHS */
track = (u32)block / dev->sectors;
scsicmd[0] == WRITE_16)
tf->flags |= ATA_TFLAG_WRITE;
- /* Calculate the SCSI LBA and transfer length. */
+ /* Calculate the SCSI LBA, transfer length and FUA. */
switch (scsicmd[0]) {
case READ_10:
case WRITE_10:
scsi_10_lba_len(scsicmd, &block, &n_block);
+ if (unlikely(scsicmd[1] & (1 << 3)))
+ tf->flags |= ATA_TFLAG_FUA;
break;
case READ_6:
case WRITE_6:
case READ_16:
case WRITE_16:
scsi_16_lba_len(scsicmd, &block, &n_block);
+ if (unlikely(scsicmd[1] & (1 << 3)))
+ tf->flags |= ATA_TFLAG_FUA;
break;
default:
DPRINTK("no-byte command\n");
if (dev->flags & ATA_DFLAG_LBA) {
tf->flags |= ATA_TFLAG_LBA;
- if (dev->flags & ATA_DFLAG_LBA48) {
- /* The request -may- be too large for LBA48. */
- if ((block >> 48) || (n_block > 65536))
+ if (lba_28_ok(block, n_block)) {
+ /* use LBA28 */
+ tf->device |= (block >> 24) & 0xf;
+ } else if (lba_48_ok(block, n_block)) {
+ if (!(dev->flags & ATA_DFLAG_LBA48))
goto out_of_range;
/* use LBA48 */
tf->hob_lbah = (block >> 40) & 0xff;
tf->hob_lbam = (block >> 32) & 0xff;
tf->hob_lbal = (block >> 24) & 0xff;
- } else {
- /* use LBA28 */
-
- /* The request -may- be too large for LBA28. */
- if ((block >> 28) || (n_block > 256))
- goto out_of_range;
-
- tf->device |= (block >> 24) & 0xf;
- }
+ } else
+ /* request too large even for LBA48 */
+ goto out_of_range;
- ata_rwcmd_protocol(qc);
+ if (unlikely(ata_rwcmd_protocol(qc) < 0))
+ goto invalid_fld;
qc->nsect = n_block;
tf->nsect = n_block & 0xff;
u32 sect, head, cyl, track;
/* The request -may- be too large for CHS addressing. */
- if ((block >> 28) || (n_block > 256))
+ if (!lba_28_ok(block, n_block))
goto out_of_range;
- ata_rwcmd_protocol(qc);
+ if (unlikely(ata_rwcmd_protocol(qc) < 0))
+ goto invalid_fld;
/* Convert LBA to CHS */
track = (u32)block / dev->sectors;
return 1;
}
-static int ata_scsi_qc_complete(struct ata_queued_cmd *qc,
- unsigned int err_mask)
+static int ata_scsi_qc_complete(struct ata_queued_cmd *qc)
{
struct scsi_cmnd *cmd = qc->scsicmd;
u8 *cdb = cmd->cmnd;
- int need_sense = (err_mask != 0);
+ int need_sense = (qc->err_mask != 0);
/* For ATA pass thru (SAT) commands, generate a sense block if
* user mandated it or if there's an error. Note that if we
return 0;
}
-static const char *inq_83_str = "Linux ATA-SCSI simulator";
+static const char * const inq_83_str = "Linux ATA-SCSI simulator";
/**
* ata_scsiop_inq_83 - Simulate INQUIRY EVPD page 83, device identity
unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen)
{
+ struct ata_device *dev = args->dev;
u8 *scsicmd = args->cmd->cmnd, *p, *last;
const u8 sat_blk_desc[] = {
0, 0, 0, 0, /* number of blocks: sat unspecified */
};
u8 pg, spg;
unsigned int ebd, page_control, six_byte, output_len, alloc_len, minlen;
+ u8 dpofua;
VPRINTK("ENTER\n");
if (minlen < 1)
return 0;
+
+ dpofua = 0;
+ if (ata_id_has_fua(args->id) && dev->flags & ATA_DFLAG_LBA48 &&
+ (!(dev->flags & ATA_DFLAG_PIO) || dev->multi_count))
+ dpofua = 1 << 4;
+
if (six_byte) {
output_len--;
rbuf[0] = output_len;
+ if (minlen > 2)
+ rbuf[2] |= dpofua;
if (ebd) {
if (minlen > 3)
rbuf[3] = sizeof(sat_blk_desc);
rbuf[0] = output_len >> 8;
if (minlen > 1)
rbuf[1] = output_len;
+ if (minlen > 3)
+ rbuf[3] |= dpofua;
if (ebd) {
if (minlen > 7)
rbuf[7] = sizeof(sat_blk_desc);
done(cmd);
}
-static int atapi_sense_complete(struct ata_queued_cmd *qc,unsigned int err_mask)
+static int atapi_sense_complete(struct ata_queued_cmd *qc)
{
- if (err_mask && ((err_mask & AC_ERR_DEV) == 0))
+ if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0))
/* FIXME: not quite right; we don't want the
* translation of taskfile registers into
* a sense descriptors, since that's only
qc->complete_fn = atapi_sense_complete;
- if (ata_qc_issue(qc))
- ata_qc_complete(qc, AC_ERR_OTHER);
+ if (ata_qc_issue(qc)) {
+ qc->err_mask |= AC_ERR_OTHER;
+ ata_qc_complete(qc);
+ }
DPRINTK("EXIT\n");
}
-static int atapi_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask)
+static int atapi_qc_complete(struct ata_queued_cmd *qc)
{
struct scsi_cmnd *cmd = qc->scsicmd;
+ unsigned int err_mask = qc->err_mask;
VPRINTK("ENTER, err_mask 0x%X\n", err_mask);
else {
u8 *scsicmd = cmd->cmnd;
- if (scsicmd[0] == INQUIRY) {
+ if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) {
u8 *buf = NULL;
unsigned int buflen;
* to indicate to the Linux scsi midlayer this is a modern
* device. 2) Ensure response data format / ATAPI information
* are always correct.
- */
- /* FIXME: do we ever override EVPD pages and the like, with
- * this code?
*/
if (buf[2] == 0) {
buf[2] = 0x5;
if (unlikely(!ata_dev_present(dev)))
return NULL;
- if (!atapi_enabled) {
- if (unlikely(dev->class == ATA_DEV_ATAPI))
+ if (!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) {
+ if (unlikely(dev->class == ATA_DEV_ATAPI)) {
+ printk(KERN_WARNING "ata%u(%u): WARNING: ATAPI is %s, device ignored.\n",
+ ap->id, dev->devno, atapi_enabled ? "not supported with this driver" : "disabled");
return NULL;
+ }
}
return dev;
if (xlat_func)
ata_scsi_translate(ap, dev, cmd, done, xlat_func);
else
- ata_scsi_simulate(dev->id, cmd, done);
+ ata_scsi_simulate(ap, dev, cmd, done);
} else
ata_scsi_translate(ap, dev, cmd, done, atapi_xlat);
* spin_lock_irqsave(host_set lock)
*/
-void ata_scsi_simulate(u16 *id,
+void ata_scsi_simulate(struct ata_port *ap, struct ata_device *dev,
struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
struct ata_scsi_args args;
const u8 *scsicmd = cmd->cmnd;
- args.id = id;
+ args.ap = ap;
+ args.dev = dev;
+ args.id = dev->id;
args.cmd = cmd;
args.done = done;
git.openpandora.org / pandora-kernel.git / blobdiff