wl->rssi_thold = 0;
wl->channel = WL1251_DEFAULT_CHANNEL;
wl->monitor_present = false;
+ wl->joined = false;
wl1251_debugfs_reset(wl);
mutex_lock(&wl->mutex);
wl1251_debug(DEBUG_MAC80211, "mac80211 remove interface");
wl->vif = NULL;
+ memset(wl->bssid, 0, ETH_ALEN);
mutex_unlock(&wl->mutex);
}
+static int wl1251_build_null_data(struct wl1251 *wl)
+{
+ struct sk_buff *skb = NULL;
+ int size;
+ void *ptr;
+ int ret = -ENOMEM;
+
+
+ if (wl->bss_type == BSS_TYPE_IBSS) {
+ size = sizeof(struct wl12xx_null_data_template);
+ ptr = NULL;
+ } else {
+ skb = ieee80211_nullfunc_get(wl->hw, wl->vif);
+ if (!skb)
+ goto out;
+ size = skb->len;
+ ptr = skb->data;
+ }
+
+ ret = wl1251_cmd_template_set(wl, CMD_NULL_DATA, ptr, size);
+
+out:
+ dev_kfree_skb(skb);
+ if (ret)
+ wl1251_warning("cmd buld null data failed %d", ret);
+
+ return ret;
+
+}
+
static int wl1251_build_qos_null_data(struct wl1251 *wl)
{
struct ieee80211_qos_hdr template;
if (channel != wl->channel) {
wl->channel = channel;
- ret = wl1251_join(wl, wl->bss_type, wl->channel,
- wl->beacon_int, wl->dtim_period);
+ /*
+ * Use ENABLE_RX command for channel switching when no
+ * interface is present (monitor mode only).
+ * This leaves the tx path disabled in firmware, whereas
+ * the usual JOIN command seems to transmit some frames
+ * at firmware level.
+ */
+ if (wl->vif == NULL) {
+ wl->joined = false;
+ ret = wl1251_cmd_data_path_rx(wl, wl->channel, 1);
+ } else {
+ ret = wl1251_join(wl, wl->bss_type, wl->channel,
+ wl->beacon_int, wl->dtim_period);
+ }
if (ret < 0)
goto out_sleep;
}
wl->power_level = conf->power_level;
}
+ /*
+ * Tell stack that connection is lost because hw encryption isn't
+ * supported in monitor mode.
+ * This requires temporary enabling of the hw connection monitor flag
+ */
+ if ((changed & IEEE80211_CONF_CHANGE_MONITOR) && wl->vif) {
+ wl->hw->flags |= IEEE80211_HW_CONNECTION_MONITOR;
+ ieee80211_connection_loss(wl->vif);
+ }
+
out_sleep:
wl1251_ps_elp_sleep(wl);
ret = wl1251_cmd_scan(wl, ssid, ssid_len, req->channels,
req->n_channels, WL1251_SCAN_NUM_PROBES);
if (ret < 0) {
+ wl1251_debug(DEBUG_SCAN, "scan failed %d", ret);
wl->scanning = false;
goto out_sleep;
}
wl->rssi_thold = bss_conf->cqm_rssi_thold;
}
- if (changed & BSS_CHANGED_BSSID) {
+ if ((changed & BSS_CHANGED_BSSID) &&
+ memcmp(wl->bssid, bss_conf->bssid, ETH_ALEN)) {
memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
- skb = ieee80211_nullfunc_get(wl->hw, wl->vif);
- if (!skb)
- goto out_sleep;
-
- ret = wl1251_cmd_template_set(wl, CMD_NULL_DATA,
- skb->data, skb->len);
- dev_kfree_skb(skb);
- if (ret < 0)
- goto out_sleep;
+ if (!is_zero_ether_addr(wl->bssid)) {
+ ret = wl1251_build_null_data(wl);
+ if (ret < 0)
+ goto out_sleep;
- ret = wl1251_build_qos_null_data(wl);
- if (ret < 0)
- goto out;
+ ret = wl1251_build_qos_null_data(wl);
+ if (ret < 0)
+ goto out_sleep;
- if (wl->bss_type != BSS_TYPE_IBSS) {
ret = wl1251_join(wl, wl->bss_type, wl->channel,
wl->beacon_int, wl->dtim_period);
if (ret < 0)
}
if (changed & BSS_CHANGED_ASSOC) {
+ /* Disable temporary enabled hw connection monitor flag */
+ wl->hw->flags &= ~IEEE80211_HW_CONNECTION_MONITOR;
+
if (bss_conf->assoc) {
wl->beacon_int = bss_conf->beacon_int;
INIT_DELAYED_WORK(&wl->elp_work, wl1251_elp_work);
wl->channel = WL1251_DEFAULT_CHANNEL;
wl->monitor_present = false;
+ wl->joined = false;
wl->scanning = false;
+ wl->bss_type = MAX_BSS_TYPE;
wl->default_key = 0;
wl->listen_int = 1;
wl->rx_counter = 0;