b43: LP-PHY: Initialize TX power control

[pandora-kernel.git] / drivers / net / wireless / b43 / phy_lp.h

diff --git a/drivers/net/wireless/b43/phy_lp.h b/drivers/net/wireless/b43/phy_lp.h
index 18370b4..4eab760 100644 (file)
--- a/drivers/net/wireless/b43/phy_lp.h
+++ b/drivers/net/wireless/b43/phy_lp.h
@@ -273,12 +273,19 @@
 #define B43_LPPHY_AFE_DDFS_POINTER_INIT                B43_PHY_OFDM(0xB8) /* AFE DDFS pointer init */
 #define B43_LPPHY_AFE_DDFS_INCR_INIT           B43_PHY_OFDM(0xB9) /* AFE DDFS incr init */
 #define B43_LPPHY_MRCNOISEREDUCTION            B43_PHY_OFDM(0xBA) /* mrcNoiseReduction */
-#define B43_LPPHY_TRLOOKUP3                    B43_PHY_OFDM(0xBB) /* TRLookup3 */
-#define B43_LPPHY_TRLOOKUP4                    B43_PHY_OFDM(0xBC) /* TRLookup4 */
+#define B43_LPPHY_TR_LOOKUP_3                  B43_PHY_OFDM(0xBB) /* TR Lookup 3 */
+#define B43_LPPHY_TR_LOOKUP_4                  B43_PHY_OFDM(0xBC) /* TR Lookup 4 */
 #define B43_LPPHY_RADAR_FIFO_STAT              B43_PHY_OFDM(0xBD) /* Radar FIFO Status */
 #define B43_LPPHY_GPIO_OUTEN                   B43_PHY_OFDM(0xBE) /* GPIO Out enable */
 #define B43_LPPHY_GPIO_SELECT                  B43_PHY_OFDM(0xBF) /* GPIO Select */
 #define B43_LPPHY_GPIO_OUT                     B43_PHY_OFDM(0xC0) /* GPIO Out */
+#define B43_LPPHY_4C3                          B43_PHY_OFDM(0xC3) /* unknown, used during BB init */
+#define B43_LPPHY_4C4                          B43_PHY_OFDM(0xC4) /* unknown, used during BB init */
+#define B43_LPPHY_4C5                          B43_PHY_OFDM(0xC5) /* unknown, used during BB init */
+#define B43_LPPHY_TR_LOOKUP_5                  B43_PHY_OFDM(0xC7) /* TR Lookup 5 */
+#define B43_LPPHY_TR_LOOKUP_6                  B43_PHY_OFDM(0xC8) /* TR Lookup 6 */
+#define B43_LPPHY_TR_LOOKUP_7                  B43_PHY_OFDM(0xC9) /* TR Lookup 7 */
+#define B43_LPPHY_TR_LOOKUP_8                  B43_PHY_OFDM(0xCA) /* TR Lookup 8 */
 
 
 
@@ -824,6 +831,22 @@ struct b43_phy_lp {
        /* Transmit isolation high band */
        u8 tx_isolation_hi_band; /* FIXME initial value? */
 
+       /* Max transmit power medium band */
+       u16 max_tx_pwr_med_band;
+       /* Max transmit power low band */
+       u16 max_tx_pwr_low_band;
+       /* Max transmit power high band */
+       u16 max_tx_pwr_hi_band;
+
+       /* FIXME What are these used for? */
+       /* FIXME Is 15 the correct array size? */
+       u16 tx_max_rate[15];
+       u16 tx_max_ratel[15];
+       u16 tx_max_rateh[15];
+
+       /* Transmit power arrays */
+       s16 txpa[3], txpal[3], txpah[3];
+
        /* Receive power offset */
        u8 rx_pwr_offset; /* FIXME initial value? */
 
@@ -858,8 +881,16 @@ struct b43_phy_lp {
        /* Transmit iqlocal best coeffs */
        bool tx_iqloc_best_coeffs_valid;
        u8 tx_iqloc_best_coeffs[11];
+
+       /* Used for "Save/Restore Dig Filt State" */
+       u16 dig_flt_state[9];
 };
 
+enum tssi_mux_mode {
+       TSSI_MUX_PREPA,
+       TSSI_MUX_POSTPA,
+       TSSI_MUX_EXT,
+};
 
 struct b43_phy_operations;
 extern const struct b43_phy_operations b43_phyops_lp;