struct ath_hw *ah = sc->sc_ah;
if (sc->curtxpow != sc->config.txpowlimit) {
- ath9k_hw_set_txpowerlimit(ah, sc->config.txpowlimit);
+ ath9k_hw_set_txpowerlimit(ah, sc->config.txpowlimit, false);
/* read back in case value is clamped */
sc->curtxpow = ath9k_hw_regulatory(ah)->power_limit;
}
chan_idx = curchan->hw_value;
channel = &sc->sc_ah->channels[chan_idx];
- ath9k_update_ichannel(sc, hw, channel);
+ ath9k_cmn_update_ichannel(channel, curchan, hw->conf.channel_type);
return channel;
}
int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
struct ath9k_channel *hchan)
{
- struct ath_wiphy *aphy = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_conf *conf = &common->hw->conf;
cancel_work_sync(&sc->paprd_work);
cancel_work_sync(&sc->hw_check_work);
cancel_delayed_work_sync(&sc->tx_complete_work);
+ cancel_delayed_work_sync(&sc->hw_pll_work);
ath9k_ps_wakeup(sc);
+ spin_lock_bh(&sc->sc_pcu_lock);
+
/*
* This is only performed if the channel settings have
* actually changed.
* hardware at the new frequency, and then re-enable
* the relevant bits of the h/w.
*/
- ath9k_hw_set_interrupts(ah, 0);
+ ath9k_hw_disable_interrupts(ah);
stopped = ath_drain_all_txq(sc, false);
- spin_lock_bh(&sc->rx.pcu_lock);
-
if (!ath_stoprecv(sc))
stopped = false;
+ if (!ath9k_hw_check_alive(ah))
+ stopped = false;
+
/* XXX: do not flush receive queue here. We don't want
* to flush data frames already in queue because of
* changing channel. */
fastcc = false;
if (!(sc->sc_flags & SC_OP_OFFCHANNEL))
- caldata = &aphy->caldata;
-
- ath_print(common, ATH_DBG_CONFIG,
- "(%u MHz) -> (%u MHz), conf_is_ht40: %d fastcc: %d\n",
- sc->sc_ah->curchan->channel,
- channel->center_freq, conf_is_ht40(conf),
- fastcc);
+ caldata = &sc->caldata;
- spin_lock_bh(&sc->sc_resetlock);
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "(%u MHz) -> (%u MHz), conf_is_ht40: %d fastcc: %d\n",
+ sc->sc_ah->curchan->channel,
+ channel->center_freq, conf_is_ht40(conf),
+ fastcc);
r = ath9k_hw_reset(ah, hchan, caldata, fastcc);
if (r) {
- ath_print(common, ATH_DBG_FATAL,
- "Unable to reset channel (%u MHz), "
- "reset status %d\n",
- channel->center_freq, r);
- spin_unlock_bh(&sc->sc_resetlock);
- spin_unlock_bh(&sc->rx.pcu_lock);
+ ath_err(common,
+ "Unable to reset channel (%u MHz), reset status %d\n",
+ channel->center_freq, r);
goto ps_restore;
}
- spin_unlock_bh(&sc->sc_resetlock);
if (ath_startrecv(sc) != 0) {
- ath_print(common, ATH_DBG_FATAL,
- "Unable to restart recv logic\n");
+ ath_err(common, "Unable to restart recv logic\n");
r = -EIO;
- spin_unlock_bh(&sc->rx.pcu_lock);
goto ps_restore;
}
- spin_unlock_bh(&sc->rx.pcu_lock);
-
ath_update_txpow(sc);
ath9k_hw_set_interrupts(ah, ah->imask);
if (!(sc->sc_flags & (SC_OP_OFFCHANNEL))) {
- ath_beacon_config(sc, NULL);
+ if (sc->sc_flags & SC_OP_BEACONS)
+ ath_beacon_config(sc, NULL);
ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
+ ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, HZ/2);
ath_start_ani(common);
}
ps_restore:
+ ieee80211_wake_queues(hw);
+
+ spin_unlock_bh(&sc->sc_pcu_lock);
+
ath9k_ps_restore(sc);
return r;
}
ath9k_ps_restore(sc);
}
+static bool ath_paprd_send_frame(struct ath_softc *sc, struct sk_buff *skb, int chain)
+{
+ struct ieee80211_hw *hw = sc->hw;
+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath_tx_control txctl;
+ int time_left;
+
+ memset(&txctl, 0, sizeof(txctl));
+ txctl.txq = sc->tx.txq_map[WME_AC_BE];
+
+ memset(tx_info, 0, sizeof(*tx_info));
+ tx_info->band = hw->conf.channel->band;
+ tx_info->flags |= IEEE80211_TX_CTL_NO_ACK;
+ tx_info->control.rates[0].idx = 0;
+ tx_info->control.rates[0].count = 1;
+ tx_info->control.rates[0].flags = IEEE80211_TX_RC_MCS;
+ tx_info->control.rates[1].idx = -1;
+
+ init_completion(&sc->paprd_complete);
+ sc->paprd_pending = true;
+ txctl.paprd = BIT(chain);
+
+ if (ath_tx_start(hw, skb, &txctl) != 0) {
+ ath_dbg(common, ATH_DBG_XMIT, "PAPRD TX failed\n");
+ dev_kfree_skb_any(skb);
+ return false;
+ }
+
+ time_left = wait_for_completion_timeout(&sc->paprd_complete,
+ msecs_to_jiffies(ATH_PAPRD_TIMEOUT));
+ sc->paprd_pending = false;
+
+ if (!time_left)
+ ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_CALIBRATE,
+ "Timeout waiting for paprd training on TX chain %d\n",
+ chain);
+
+ return !!time_left;
+}
+
void ath_paprd_calibrate(struct work_struct *work)
{
struct ath_softc *sc = container_of(work, struct ath_softc, paprd_work);
struct ath_hw *ah = sc->sc_ah;
struct ieee80211_hdr *hdr;
struct sk_buff *skb = NULL;
- struct ieee80211_tx_info *tx_info;
- int band = hw->conf.channel->band;
- struct ieee80211_supported_band *sband = &sc->sbands[band];
- struct ath_tx_control txctl;
struct ath9k_hw_cal_data *caldata = ah->caldata;
struct ath_common *common = ath9k_hw_common(ah);
- int qnum, ftype;
+ int ftype;
int chain_ok = 0;
int chain;
int len = 1800;
- int time_left;
- int i;
if (!caldata)
return;
+ if (ar9003_paprd_init_table(ah) < 0)
+ return;
+
skb = alloc_skb(len, GFP_KERNEL);
if (!skb)
return;
- tx_info = IEEE80211_SKB_CB(skb);
-
skb_put(skb, len);
memset(skb->data, 0, len);
hdr = (struct ieee80211_hdr *)skb->data;
memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN);
memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN);
- memset(&txctl, 0, sizeof(txctl));
- qnum = sc->tx.hwq_map[WME_AC_BE];
- txctl.txq = &sc->tx.txq[qnum];
-
ath9k_ps_wakeup(sc);
- ar9003_paprd_init_table(ah);
for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
if (!(common->tx_chainmask & BIT(chain)))
continue;
chain_ok = 0;
- memset(tx_info, 0, sizeof(*tx_info));
- tx_info->band = band;
- for (i = 0; i < 4; i++) {
- tx_info->control.rates[i].idx = sband->n_bitrates - 1;
- tx_info->control.rates[i].count = 6;
- }
+ ath_dbg(common, ATH_DBG_CALIBRATE,
+ "Sending PAPRD frame for thermal measurement "
+ "on chain %d\n", chain);
+ if (!ath_paprd_send_frame(sc, skb, chain))
+ goto fail_paprd;
- init_completion(&sc->paprd_complete);
ar9003_paprd_setup_gain_table(ah, chain);
- txctl.paprd = BIT(chain);
- if (ath_tx_start(hw, skb, &txctl) != 0)
- break;
- time_left = wait_for_completion_timeout(&sc->paprd_complete,
- msecs_to_jiffies(ATH_PAPRD_TIMEOUT));
- if (!time_left) {
- ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
- "Timeout waiting for paprd training on "
- "TX chain %d\n",
- chain);
+ ath_dbg(common, ATH_DBG_CALIBRATE,
+ "Sending PAPRD training frame on chain %d\n", chain);
+ if (!ath_paprd_send_frame(sc, skb, chain))
goto fail_paprd;
- }
if (!ar9003_paprd_is_done(ah))
break;
/* Long calibration runs independently of short calibration. */
if ((timestamp - common->ani.longcal_timer) >= long_cal_interval) {
longcal = true;
- ath_print(common, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
+ ath_dbg(common, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
common->ani.longcal_timer = timestamp;
}
if (!common->ani.caldone) {
if ((timestamp - common->ani.shortcal_timer) >= short_cal_interval) {
shortcal = true;
- ath_print(common, ATH_DBG_ANI,
- "shortcal @%lu\n", jiffies);
+ ath_dbg(common, ATH_DBG_ANI,
+ "shortcal @%lu\n", jiffies);
common->ani.shortcal_timer = timestamp;
common->ani.resetcal_timer = timestamp;
}
if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_PAPRD) && ah->caldata) {
if (!ah->caldata->paprd_done)
ieee80211_queue_work(sc->hw, &sc->paprd_work);
- else
+ else if (!ah->paprd_table_write_done)
ath_paprd_activate(sc);
}
}
-/*
- * Update tx/rx chainmask. For legacy association,
- * hard code chainmask to 1x1, for 11n association, use
- * the chainmask configuration, for bt coexistence, use
- * the chainmask configuration even in legacy mode.
- */
-void ath_update_chainmask(struct ath_softc *sc, int is_ht)
-{
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
-
- if ((sc->sc_flags & SC_OP_OFFCHANNEL) || is_ht ||
- (ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE)) {
- common->tx_chainmask = ah->caps.tx_chainmask;
- common->rx_chainmask = ah->caps.rx_chainmask;
- } else {
- common->tx_chainmask = 1;
- common->rx_chainmask = 1;
- }
-
- ath_print(common, ATH_DBG_CONFIG,
- "tx chmask: %d, rx chmask: %d\n",
- common->tx_chainmask,
- common->rx_chainmask);
-}
-
static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
{
struct ath_node *an;
-
+ struct ath_hw *ah = sc->sc_ah;
an = (struct ath_node *)sta->drv_priv;
+#ifdef CONFIG_ATH9K_DEBUGFS
+ spin_lock(&sc->nodes_lock);
+ list_add(&an->list, &sc->nodes);
+ spin_unlock(&sc->nodes_lock);
+ an->sta = sta;
+#endif
+ if ((ah->caps.hw_caps) & ATH9K_HW_CAP_APM)
+ sc->sc_flags |= SC_OP_ENABLE_APM;
+
if (sc->sc_flags & SC_OP_TXAGGR) {
ath_tx_node_init(sc, an);
an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
sta->ht_cap.ampdu_factor);
an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
- an->last_rssi = ATH_RSSI_DUMMY_MARKER;
}
}
{
struct ath_node *an = (struct ath_node *)sta->drv_priv;
+#ifdef CONFIG_ATH9K_DEBUGFS
+ spin_lock(&sc->nodes_lock);
+ list_del(&an->list);
+ spin_unlock(&sc->nodes_lock);
+ an->sta = NULL;
+#endif
+
if (sc->sc_flags & SC_OP_TXAGGR)
ath_tx_node_cleanup(sc, an);
}
u32 status = sc->intrstatus;
u32 rxmask;
- ath9k_ps_wakeup(sc);
-
if (status & ATH9K_INT_FATAL) {
ath_reset(sc, true);
- ath9k_ps_restore(sc);
return;
}
- if (!ath9k_hw_check_alive(ah))
+ ath9k_ps_wakeup(sc);
+ spin_lock(&sc->sc_pcu_lock);
+
+ /*
+ * Only run the baseband hang check if beacons stop working in AP or
+ * IBSS mode, because it has a high false positive rate. For station
+ * mode it should not be necessary, since the upper layers will detect
+ * this through a beacon miss automatically and the following channel
+ * change will trigger a hardware reset anyway
+ */
+ if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0 &&
+ !ath9k_hw_check_alive(ah))
ieee80211_queue_work(sc->hw, &sc->hw_check_work);
if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
rxmask = (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN);
if (status & rxmask) {
- spin_lock_bh(&sc->rx.pcu_lock);
-
/* Check for high priority Rx first */
if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
(status & ATH9K_INT_RXHP))
ath_rx_tasklet(sc, 0, true);
ath_rx_tasklet(sc, 0, false);
- spin_unlock_bh(&sc->rx.pcu_lock);
}
if (status & ATH9K_INT_TX) {
* TSF sync does not look correct; remain awake to sync with
* the next Beacon.
*/
- ath_print(common, ATH_DBG_PS,
- "TSFOOR - Sync with next Beacon\n");
+ ath_dbg(common, ATH_DBG_PS,
+ "TSFOOR - Sync with next Beacon\n");
sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC;
}
ath_gen_timer_isr(sc->sc_ah);
/* re-enable hardware interrupt */
- ath9k_hw_set_interrupts(ah, ah->imask);
+ ath9k_hw_enable_interrupts(ah);
+
+ spin_unlock(&sc->sc_pcu_lock);
ath9k_ps_restore(sc);
}
* interrupt; otherwise it will continue to
* fire.
*/
- ath9k_hw_set_interrupts(ah, 0);
+ ath9k_hw_disable_interrupts(ah);
/*
* Let the hal handle the event. We assume
* it will clear whatever condition caused
spin_lock(&common->cc_lock);
ath9k_hw_proc_mib_event(ah);
spin_unlock(&common->cc_lock);
- ath9k_hw_set_interrupts(ah, ah->imask);
+ ath9k_hw_enable_interrupts(ah);
}
if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
if (status & ATH9K_INT_TIM_TIMER) {
+ if (ATH_DBG_WARN_ON_ONCE(sc->ps_idle))
+ goto chip_reset;
/* Clear RxAbort bit so that we can
* receive frames */
ath9k_setpower(sc, ATH9K_PM_AWAKE);
ath_debug_stat_interrupt(sc, status);
if (sched) {
- /* turn off every interrupt except SWBA */
- ath9k_hw_set_interrupts(ah, (ah->imask & ATH9K_INT_SWBA));
+ /* turn off every interrupt */
+ ath9k_hw_disable_interrupts(ah);
tasklet_schedule(&sc->intr_tq);
}
#undef SCHED_INTR
}
-static u32 ath_get_extchanmode(struct ath_softc *sc,
- struct ieee80211_channel *chan,
- enum nl80211_channel_type channel_type)
-{
- u32 chanmode = 0;
-
- switch (chan->band) {
- case IEEE80211_BAND_2GHZ:
- switch(channel_type) {
- case NL80211_CHAN_NO_HT:
- case NL80211_CHAN_HT20:
- chanmode = CHANNEL_G_HT20;
- break;
- case NL80211_CHAN_HT40PLUS:
- chanmode = CHANNEL_G_HT40PLUS;
- break;
- case NL80211_CHAN_HT40MINUS:
- chanmode = CHANNEL_G_HT40MINUS;
- break;
- }
- break;
- case IEEE80211_BAND_5GHZ:
- switch(channel_type) {
- case NL80211_CHAN_NO_HT:
- case NL80211_CHAN_HT20:
- chanmode = CHANNEL_A_HT20;
- break;
- case NL80211_CHAN_HT40PLUS:
- chanmode = CHANNEL_A_HT40PLUS;
- break;
- case NL80211_CHAN_HT40MINUS:
- chanmode = CHANNEL_A_HT40MINUS;
- break;
- }
- break;
- default:
- break;
- }
-
- return chanmode;
-}
-
static void ath9k_bss_assoc_info(struct ath_softc *sc,
+ struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf)
{
struct ath_common *common = ath9k_hw_common(ah);
if (bss_conf->assoc) {
- ath_print(common, ATH_DBG_CONFIG,
- "Bss Info ASSOC %d, bssid: %pM\n",
- bss_conf->aid, common->curbssid);
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "Bss Info ASSOC %d, bssid: %pM\n",
+ bss_conf->aid, common->curbssid);
/* New association, store aid */
common->curaid = bss_conf->aid;
ath_beacon_config(sc, vif);
/* Reset rssi stats */
+ sc->last_rssi = ATH_RSSI_DUMMY_MARKER;
sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
sc->sc_flags |= SC_OP_ANI_RUN;
ath_start_ani(common);
} else {
- ath_print(common, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
+ ath_dbg(common, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
common->curaid = 0;
/* Stop ANI */
sc->sc_flags &= ~SC_OP_ANI_RUN;
int r;
ath9k_ps_wakeup(sc);
+ spin_lock_bh(&sc->sc_pcu_lock);
+
ath9k_hw_configpcipowersave(ah, 0, 0);
if (!ah->curchan)
ah->curchan = ath_get_curchannel(sc, sc->hw);
- spin_lock_bh(&sc->rx.pcu_lock);
- spin_lock_bh(&sc->sc_resetlock);
r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
if (r) {
- ath_print(common, ATH_DBG_FATAL,
- "Unable to reset channel (%u MHz), "
- "reset status %d\n",
- channel->center_freq, r);
+ ath_err(common,
+ "Unable to reset channel (%u MHz), reset status %d\n",
+ channel->center_freq, r);
}
- spin_unlock_bh(&sc->sc_resetlock);
ath_update_txpow(sc);
if (ath_startrecv(sc) != 0) {
- ath_print(common, ATH_DBG_FATAL,
- "Unable to restart recv logic\n");
- spin_unlock_bh(&sc->rx.pcu_lock);
- return;
+ ath_err(common, "Unable to restart recv logic\n");
+ goto out;
}
- spin_unlock_bh(&sc->rx.pcu_lock);
-
if (sc->sc_flags & SC_OP_BEACONS)
ath_beacon_config(sc, NULL); /* restart beacons */
ath9k_hw_set_gpio(ah, ah->led_pin, 0);
ieee80211_wake_queues(hw);
+out:
+ spin_unlock_bh(&sc->sc_pcu_lock);
+
ath9k_ps_restore(sc);
}
int r;
ath9k_ps_wakeup(sc);
+ spin_lock_bh(&sc->sc_pcu_lock);
+
ieee80211_stop_queues(hw);
/*
}
/* Disable interrupts */
- ath9k_hw_set_interrupts(ah, 0);
+ ath9k_hw_disable_interrupts(ah);
ath_drain_all_txq(sc, false); /* clear pending tx frames */
- spin_lock_bh(&sc->rx.pcu_lock);
-
ath_stoprecv(sc); /* turn off frame recv */
ath_flushrecv(sc); /* flush recv queue */
if (!ah->curchan)
ah->curchan = ath_get_curchannel(sc, hw);
- spin_lock_bh(&sc->sc_resetlock);
r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
if (r) {
- ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
- "Unable to reset channel (%u MHz), "
- "reset status %d\n",
- channel->center_freq, r);
+ ath_err(ath9k_hw_common(sc->sc_ah),
+ "Unable to reset channel (%u MHz), reset status %d\n",
+ channel->center_freq, r);
}
- spin_unlock_bh(&sc->sc_resetlock);
ath9k_hw_phy_disable(ah);
- spin_unlock_bh(&sc->rx.pcu_lock);
-
ath9k_hw_configpcipowersave(ah, 1, 1);
+
+ spin_unlock_bh(&sc->sc_pcu_lock);
ath9k_ps_restore(sc);
- ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
}
int ath_reset(struct ath_softc *sc, bool retry_tx)
/* Stop ANI */
del_timer_sync(&common->ani.timer);
+ ath9k_ps_wakeup(sc);
+ spin_lock_bh(&sc->sc_pcu_lock);
+
ieee80211_stop_queues(hw);
- ath9k_hw_set_interrupts(ah, 0);
+ ath9k_hw_disable_interrupts(ah);
ath_drain_all_txq(sc, retry_tx);
- spin_lock_bh(&sc->rx.pcu_lock);
-
ath_stoprecv(sc);
ath_flushrecv(sc);
- spin_lock_bh(&sc->sc_resetlock);
r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
if (r)
- ath_print(common, ATH_DBG_FATAL,
- "Unable to reset hardware; reset status %d\n", r);
- spin_unlock_bh(&sc->sc_resetlock);
+ ath_err(common,
+ "Unable to reset hardware; reset status %d\n", r);
if (ath_startrecv(sc) != 0)
- ath_print(common, ATH_DBG_FATAL,
- "Unable to start recv logic\n");
-
- spin_unlock_bh(&sc->rx.pcu_lock);
+ ath_err(common, "Unable to start recv logic\n");
/*
* We may be doing a reset in response to a request
}
ieee80211_wake_queues(hw);
+ spin_unlock_bh(&sc->sc_pcu_lock);
/* Start ANI */
ath_start_ani(common);
+ ath9k_ps_restore(sc);
return r;
}
-static int ath_get_hal_qnum(u16 queue, struct ath_softc *sc)
-{
- int qnum;
-
- switch (queue) {
- case 0:
- qnum = sc->tx.hwq_map[WME_AC_VO];
- break;
- case 1:
- qnum = sc->tx.hwq_map[WME_AC_VI];
- break;
- case 2:
- qnum = sc->tx.hwq_map[WME_AC_BE];
- break;
- case 3:
- qnum = sc->tx.hwq_map[WME_AC_BK];
- break;
- default:
- qnum = sc->tx.hwq_map[WME_AC_BE];
- break;
- }
-
- return qnum;
-}
-
-int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc)
-{
- int qnum;
-
- switch (queue) {
- case WME_AC_VO:
- qnum = 0;
- break;
- case WME_AC_VI:
- qnum = 1;
- break;
- case WME_AC_BE:
- qnum = 2;
- break;
- case WME_AC_BK:
- qnum = 3;
- break;
- default:
- qnum = -1;
- break;
- }
-
- return qnum;
-}
-
-/* XXX: Remove me once we don't depend on ath9k_channel for all
- * this redundant data */
-void ath9k_update_ichannel(struct ath_softc *sc, struct ieee80211_hw *hw,
- struct ath9k_channel *ichan)
-{
- struct ieee80211_channel *chan = hw->conf.channel;
- struct ieee80211_conf *conf = &hw->conf;
-
- ichan->channel = chan->center_freq;
- ichan->chan = chan;
-
- if (chan->band == IEEE80211_BAND_2GHZ) {
- ichan->chanmode = CHANNEL_G;
- ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM | CHANNEL_G;
- } else {
- ichan->chanmode = CHANNEL_A;
- ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM;
- }
-
- if (conf_is_ht(conf))
- ichan->chanmode = ath_get_extchanmode(sc, chan,
- conf->channel_type);
-}
-
/**********************/
/* mac80211 callbacks */
/**********************/
static int ath9k_start(struct ieee80211_hw *hw)
{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
+ struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_channel *curchan = hw->conf.channel;
struct ath9k_channel *init_channel;
int r;
- ath_print(common, ATH_DBG_CONFIG,
- "Starting driver with initial channel: %d MHz\n",
- curchan->center_freq);
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "Starting driver with initial channel: %d MHz\n",
+ curchan->center_freq);
mutex_lock(&sc->mutex);
- if (ath9k_wiphy_started(sc)) {
- if (sc->chan_idx == curchan->hw_value) {
- /*
- * Already on the operational channel, the new wiphy
- * can be marked active.
- */
- aphy->state = ATH_WIPHY_ACTIVE;
- ieee80211_wake_queues(hw);
- } else {
- /*
- * Another wiphy is on another channel, start the new
- * wiphy in paused state.
- */
- aphy->state = ATH_WIPHY_PAUSED;
- ieee80211_stop_queues(hw);
- }
- mutex_unlock(&sc->mutex);
- return 0;
- }
- aphy->state = ATH_WIPHY_ACTIVE;
-
/* setup initial channel */
-
sc->chan_idx = curchan->hw_value;
init_channel = ath_get_curchannel(sc, hw);
* be followed by initialization of the appropriate bits
* and then setup of the interrupt mask.
*/
- spin_lock_bh(&sc->rx.pcu_lock);
- spin_lock_bh(&sc->sc_resetlock);
+ spin_lock_bh(&sc->sc_pcu_lock);
r = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
if (r) {
- ath_print(common, ATH_DBG_FATAL,
- "Unable to reset hardware; reset status %d "
- "(freq %u MHz)\n", r,
- curchan->center_freq);
- spin_unlock_bh(&sc->sc_resetlock);
- spin_unlock_bh(&sc->rx.pcu_lock);
+ ath_err(common,
+ "Unable to reset hardware; reset status %d (freq %u MHz)\n",
+ r, curchan->center_freq);
+ spin_unlock_bh(&sc->sc_pcu_lock);
goto mutex_unlock;
}
- spin_unlock_bh(&sc->sc_resetlock);
/*
* This is needed only to setup initial state
* here except setup the interrupt mask.
*/
if (ath_startrecv(sc) != 0) {
- ath_print(common, ATH_DBG_FATAL,
- "Unable to start recv logic\n");
+ ath_err(common, "Unable to start recv logic\n");
r = -EIO;
- spin_unlock_bh(&sc->rx.pcu_lock);
+ spin_unlock_bh(&sc->sc_pcu_lock);
goto mutex_unlock;
}
- spin_unlock_bh(&sc->rx.pcu_lock);
+ spin_unlock_bh(&sc->sc_pcu_lock);
/* Setup our intr mask. */
ah->imask = ATH9K_INT_TX | ATH9K_INT_RXEOL |
ath9k_btcoex_timer_resume(sc);
}
- pm_qos_update_request(&sc->pm_qos_req, 55);
+ /* User has the option to provide pm-qos value as a module
+ * parameter rather than using the default value of
+ * 'ATH9K_PM_QOS_DEFAULT_VALUE'.
+ */
+ pm_qos_update_request(&sc->pm_qos_req, ath9k_pm_qos_value);
+
+ if (ah->caps.pcie_lcr_extsync_en && common->bus_ops->extn_synch_en)
+ common->bus_ops->extn_synch_en(common);
mutex_unlock:
mutex_unlock(&sc->mutex);
static int ath9k_tx(struct ieee80211_hw *hw,
struct sk_buff *skb)
{
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
+ struct ath_softc *sc = hw->priv;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_tx_control txctl;
- int padpos, padsize;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
- int qnum;
-
- if (aphy->state != ATH_WIPHY_ACTIVE && aphy->state != ATH_WIPHY_SCAN) {
- ath_print(common, ATH_DBG_XMIT,
- "ath9k: %s: TX in unexpected wiphy state "
- "%d\n", wiphy_name(hw->wiphy), aphy->state);
- goto exit;
- }
if (sc->ps_enabled) {
/*
if (ieee80211_is_data(hdr->frame_control) &&
!ieee80211_is_nullfunc(hdr->frame_control) &&
!ieee80211_has_pm(hdr->frame_control)) {
- ath_print(common, ATH_DBG_PS, "Add PM=1 for a TX frame "
- "while in PS mode\n");
+ ath_dbg(common, ATH_DBG_PS,
+ "Add PM=1 for a TX frame while in PS mode\n");
hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
}
}
if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
ath9k_hw_setrxabort(sc->sc_ah, 0);
if (ieee80211_is_pspoll(hdr->frame_control)) {
- ath_print(common, ATH_DBG_PS,
- "Sending PS-Poll to pick a buffered frame\n");
+ ath_dbg(common, ATH_DBG_PS,
+ "Sending PS-Poll to pick a buffered frame\n");
sc->ps_flags |= PS_WAIT_FOR_PSPOLL_DATA;
} else {
- ath_print(common, ATH_DBG_PS,
- "Wake up to complete TX\n");
+ ath_dbg(common, ATH_DBG_PS,
+ "Wake up to complete TX\n");
sc->ps_flags |= PS_WAIT_FOR_TX_ACK;
}
/*
}
memset(&txctl, 0, sizeof(struct ath_tx_control));
+ txctl.txq = sc->tx.txq_map[skb_get_queue_mapping(skb)];
- /*
- * As a temporary workaround, assign seq# here; this will likely need
- * to be cleaned up to work better with Beacon transmission and virtual
- * BSSes.
- */
- if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
- if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
- sc->tx.seq_no += 0x10;
- hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
- hdr->seq_ctrl |= cpu_to_le16(sc->tx.seq_no);
- }
-
- /* Add the padding after the header if this is not already done */
- padpos = ath9k_cmn_padpos(hdr->frame_control);
- padsize = padpos & 3;
- if (padsize && skb->len>padpos) {
- if (skb_headroom(skb) < padsize)
- return -1;
- skb_push(skb, padsize);
- memmove(skb->data, skb->data + padsize, padpos);
- }
-
- qnum = ath_get_hal_qnum(skb_get_queue_mapping(skb), sc);
- txctl.txq = &sc->tx.txq[qnum];
-
- ath_print(common, ATH_DBG_XMIT, "transmitting packet, skb: %p\n", skb);
+ ath_dbg(common, ATH_DBG_XMIT, "transmitting packet, skb: %p\n", skb);
if (ath_tx_start(hw, skb, &txctl) != 0) {
- ath_print(common, ATH_DBG_XMIT, "TX failed\n");
+ ath_dbg(common, ATH_DBG_XMIT, "TX failed\n");
goto exit;
}
static void ath9k_stop(struct ieee80211_hw *hw)
{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
+ struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
- int i;
mutex_lock(&sc->mutex);
- aphy->state = ATH_WIPHY_INACTIVE;
-
if (led_blink)
cancel_delayed_work_sync(&sc->ath_led_blink_work);
cancel_delayed_work_sync(&sc->tx_complete_work);
+ cancel_delayed_work_sync(&sc->hw_pll_work);
cancel_work_sync(&sc->paprd_work);
cancel_work_sync(&sc->hw_check_work);
- for (i = 0; i < sc->num_sec_wiphy; i++) {
- if (sc->sec_wiphy[i])
- break;
- }
-
- if (i == sc->num_sec_wiphy) {
- cancel_delayed_work_sync(&sc->wiphy_work);
- cancel_work_sync(&sc->chan_work);
- }
-
if (sc->sc_flags & SC_OP_INVALID) {
- ath_print(common, ATH_DBG_ANY, "Device not present\n");
+ ath_dbg(common, ATH_DBG_ANY, "Device not present\n");
mutex_unlock(&sc->mutex);
return;
}
- if (ath9k_wiphy_started(sc)) {
- mutex_unlock(&sc->mutex);
- return; /* another wiphy still in use */
- }
-
/* Ensure HW is awake when we try to shut it down. */
ath9k_ps_wakeup(sc);
ath9k_btcoex_timer_pause(sc);
}
+ spin_lock_bh(&sc->sc_pcu_lock);
+
+ /* prevent tasklets to enable interrupts once we disable them */
+ ah->imask &= ~ATH9K_INT_GLOBAL;
+
/* make sure h/w will not generate any interrupt
* before setting the invalid flag. */
- ath9k_hw_set_interrupts(ah, 0);
+ ath9k_hw_disable_interrupts(ah);
- spin_lock_bh(&sc->rx.pcu_lock);
if (!(sc->sc_flags & SC_OP_INVALID)) {
ath_drain_all_txq(sc, false);
ath_stoprecv(sc);
ath9k_hw_phy_disable(ah);
} else
sc->rx.rxlink = NULL;
- spin_unlock_bh(&sc->rx.pcu_lock);
+
+ if (sc->rx.frag) {
+ dev_kfree_skb_any(sc->rx.frag);
+ sc->rx.frag = NULL;
+ }
/* disable HAL and put h/w to sleep */
ath9k_hw_disable(ah);
ath9k_hw_configpcipowersave(ah, 1, 1);
+
+ spin_unlock_bh(&sc->sc_pcu_lock);
+
+ /* we can now sync irq and kill any running tasklets, since we already
+ * disabled interrupts and not holding a spin lock */
+ synchronize_irq(sc->irq);
+ tasklet_kill(&sc->intr_tq);
+ tasklet_kill(&sc->bcon_tasklet);
+
ath9k_ps_restore(sc);
- /* Finally, put the chip in FULL SLEEP mode */
- ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
+ sc->ps_idle = true;
+ ath_radio_disable(sc, hw);
sc->sc_flags |= SC_OP_INVALID;
mutex_unlock(&sc->mutex);
- ath_print(common, ATH_DBG_CONFIG, "Driver halt\n");
+ ath_dbg(common, ATH_DBG_CONFIG, "Driver halt\n");
+}
+
+bool ath9k_uses_beacons(int type)
+{
+ switch (type) {
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_MESH_POINT:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static void ath9k_reclaim_beacon(struct ath_softc *sc,
+ struct ieee80211_vif *vif)
+{
+ struct ath_vif *avp = (void *)vif->drv_priv;
+
+ /* Disable SWBA interrupt */
+ sc->sc_ah->imask &= ~ATH9K_INT_SWBA;
+ ath9k_ps_wakeup(sc);
+ ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask);
+ ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
+ tasklet_kill(&sc->bcon_tasklet);
+ ath9k_ps_restore(sc);
+
+ ath_beacon_return(sc, avp);
+ sc->sc_flags &= ~SC_OP_BEACONS;
+
+ if (sc->nbcnvifs > 0) {
+ /* Re-enable beaconing */
+ sc->sc_ah->imask |= ATH9K_INT_SWBA;
+ ath9k_ps_wakeup(sc);
+ ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask);
+ ath9k_ps_restore(sc);
+ }
+}
+
+static void ath9k_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+{
+ struct ath9k_vif_iter_data *iter_data = data;
+ int i;
+
+ if (iter_data->hw_macaddr)
+ for (i = 0; i < ETH_ALEN; i++)
+ iter_data->mask[i] &=
+ ~(iter_data->hw_macaddr[i] ^ mac[i]);
+
+ switch (vif->type) {
+ case NL80211_IFTYPE_AP:
+ iter_data->naps++;
+ break;
+ case NL80211_IFTYPE_STATION:
+ iter_data->nstations++;
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ iter_data->nadhocs++;
+ break;
+ case NL80211_IFTYPE_MESH_POINT:
+ iter_data->nmeshes++;
+ break;
+ case NL80211_IFTYPE_WDS:
+ iter_data->nwds++;
+ break;
+ default:
+ iter_data->nothers++;
+ break;
+ }
+}
+
+/* Called with sc->mutex held. */
+void ath9k_calculate_iter_data(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ath9k_vif_iter_data *iter_data)
+{
+ struct ath_softc *sc = hw->priv;
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ /*
+ * Use the hardware MAC address as reference, the hardware uses it
+ * together with the BSSID mask when matching addresses.
+ */
+ memset(iter_data, 0, sizeof(*iter_data));
+ iter_data->hw_macaddr = common->macaddr;
+ memset(&iter_data->mask, 0xff, ETH_ALEN);
+
+ if (vif)
+ ath9k_vif_iter(iter_data, vif->addr, vif);
+
+ /* Get list of all active MAC addresses */
+ ieee80211_iterate_active_interfaces_atomic(sc->hw, ath9k_vif_iter,
+ iter_data);
}
+/* Called with sc->mutex held. */
+static void ath9k_calculate_summary_state(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct ath_softc *sc = hw->priv;
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_vif_iter_data iter_data;
+
+ ath9k_calculate_iter_data(hw, vif, &iter_data);
+
+ /* Set BSSID mask. */
+ memcpy(common->bssidmask, iter_data.mask, ETH_ALEN);
+ ath_hw_setbssidmask(common);
+
+ /* Set op-mode & TSF */
+ if (iter_data.naps > 0) {
+ ath9k_hw_set_tsfadjust(ah, 1);
+ sc->sc_flags |= SC_OP_TSF_RESET;
+ ah->opmode = NL80211_IFTYPE_AP;
+ } else {
+ ath9k_hw_set_tsfadjust(ah, 0);
+ sc->sc_flags &= ~SC_OP_TSF_RESET;
+
+ if (iter_data.nwds + iter_data.nmeshes)
+ ah->opmode = NL80211_IFTYPE_AP;
+ else if (iter_data.nadhocs)
+ ah->opmode = NL80211_IFTYPE_ADHOC;
+ else
+ ah->opmode = NL80211_IFTYPE_STATION;
+ }
+
+ /*
+ * Enable MIB interrupts when there are hardware phy counters.
+ */
+ if ((iter_data.nstations + iter_data.nadhocs + iter_data.nmeshes) > 0) {
+ if (ah->config.enable_ani)
+ ah->imask |= ATH9K_INT_MIB;
+ ah->imask |= ATH9K_INT_TSFOOR;
+ } else {
+ ah->imask &= ~ATH9K_INT_MIB;
+ ah->imask &= ~ATH9K_INT_TSFOOR;
+ }
+
+ ath9k_hw_set_interrupts(ah, ah->imask);
+
+ /* Set up ANI */
+ if ((iter_data.naps + iter_data.nadhocs) > 0) {
+ sc->sc_flags |= SC_OP_ANI_RUN;
+ ath_start_ani(common);
+ } else {
+ sc->sc_flags &= ~SC_OP_ANI_RUN;
+ del_timer_sync(&common->ani.timer);
+ }
+}
+
+/* Called with sc->mutex held, vif counts set up properly. */
+static void ath9k_do_vif_add_setup(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct ath_softc *sc = hw->priv;
+
+ ath9k_calculate_summary_state(hw, vif);
+
+ if (ath9k_uses_beacons(vif->type)) {
+ int error;
+ ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
+ /* This may fail because upper levels do not have beacons
+ * properly configured yet. That's OK, we assume it
+ * will be properly configured and then we will be notified
+ * in the info_changed method and set up beacons properly
+ * there.
+ */
+ error = ath_beacon_alloc(sc, vif);
+ if (error)
+ ath9k_reclaim_beacon(sc, vif);
+ else
+ ath_beacon_config(sc, vif);
+ }
+}
+
+
static int ath9k_add_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
+ struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath_vif *avp = (void *)vif->drv_priv;
- enum nl80211_iftype ic_opmode = NL80211_IFTYPE_UNSPECIFIED;
int ret = 0;
mutex_lock(&sc->mutex);
switch (vif->type) {
case NL80211_IFTYPE_STATION:
- ic_opmode = NL80211_IFTYPE_STATION;
- break;
case NL80211_IFTYPE_WDS:
- ic_opmode = NL80211_IFTYPE_WDS;
- break;
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_MESH_POINT:
+ break;
+ default:
+ ath_err(common, "Interface type %d not yet supported\n",
+ vif->type);
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
+
+ if (ath9k_uses_beacons(vif->type)) {
if (sc->nbcnvifs >= ATH_BCBUF) {
+ ath_err(common, "Not enough beacon buffers when adding"
+ " new interface of type: %i\n",
+ vif->type);
ret = -ENOBUFS;
goto out;
}
- ic_opmode = vif->type;
- break;
- default:
- ath_print(common, ATH_DBG_FATAL,
- "Interface type %d not yet supported\n", vif->type);
- ret = -EOPNOTSUPP;
+ }
+
+ if ((vif->type == NL80211_IFTYPE_ADHOC) &&
+ sc->nvifs > 0) {
+ ath_err(common, "Cannot create ADHOC interface when other"
+ " interfaces already exist.\n");
+ ret = -EINVAL;
goto out;
}
- ath_print(common, ATH_DBG_CONFIG,
- "Attach a VIF of type: %d\n", ic_opmode);
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "Attach a VIF of type: %d\n", vif->type);
/* Set the VIF opmode */
- avp->av_opmode = ic_opmode;
+ avp->av_opmode = vif->type;
avp->av_bslot = -1;
sc->nvifs++;
- ath9k_set_bssid_mask(hw, vif);
+ ath9k_do_vif_add_setup(hw, vif);
+out:
+ mutex_unlock(&sc->mutex);
+ return ret;
+}
- if (sc->nvifs > 1)
- goto out; /* skip global settings for secondary vif */
+static int ath9k_change_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ enum nl80211_iftype new_type,
+ bool p2p)
+{
+ struct ath_softc *sc = hw->priv;
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ int ret = 0;
- if (ic_opmode == NL80211_IFTYPE_AP) {
- ath9k_hw_set_tsfadjust(ah, 1);
- sc->sc_flags |= SC_OP_TSF_RESET;
- }
+ ath_dbg(common, ATH_DBG_CONFIG, "Change Interface\n");
+ mutex_lock(&sc->mutex);
- /* Set the device opmode */
- ah->opmode = ic_opmode;
+ /* See if new interface type is valid. */
+ if ((new_type == NL80211_IFTYPE_ADHOC) &&
+ (sc->nvifs > 1)) {
+ ath_err(common, "When using ADHOC, it must be the only"
+ " interface.\n");
+ ret = -EINVAL;
+ goto out;
+ }
- /*
- * Enable MIB interrupts when there are hardware phy counters.
- * Note we only do this (at the moment) for station mode.
- */
- if ((vif->type == NL80211_IFTYPE_STATION) ||
- (vif->type == NL80211_IFTYPE_ADHOC) ||
- (vif->type == NL80211_IFTYPE_MESH_POINT)) {
- if (ah->config.enable_ani)
- ah->imask |= ATH9K_INT_MIB;
- ah->imask |= ATH9K_INT_TSFOOR;
+ if (ath9k_uses_beacons(new_type) &&
+ !ath9k_uses_beacons(vif->type)) {
+ if (sc->nbcnvifs >= ATH_BCBUF) {
+ ath_err(common, "No beacon slot available\n");
+ ret = -ENOBUFS;
+ goto out;
+ }
}
- ath9k_hw_set_interrupts(ah, ah->imask);
+ /* Clean up old vif stuff */
+ if (ath9k_uses_beacons(vif->type))
+ ath9k_reclaim_beacon(sc, vif);
- if (vif->type == NL80211_IFTYPE_AP ||
- vif->type == NL80211_IFTYPE_ADHOC) {
- sc->sc_flags |= SC_OP_ANI_RUN;
- ath_start_ani(common);
- }
+ /* Add new settings */
+ vif->type = new_type;
+ vif->p2p = p2p;
+ ath9k_do_vif_add_setup(hw, vif);
out:
mutex_unlock(&sc->mutex);
return ret;
static void ath9k_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
+ struct ath_softc *sc = hw->priv;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
- struct ath_vif *avp = (void *)vif->drv_priv;
- ath_print(common, ATH_DBG_CONFIG, "Detach Interface\n");
+ ath_dbg(common, ATH_DBG_CONFIG, "Detach Interface\n");
mutex_lock(&sc->mutex);
- /* Stop ANI */
- sc->sc_flags &= ~SC_OP_ANI_RUN;
- del_timer_sync(&common->ani.timer);
+ sc->nvifs--;
/* Reclaim beacon resources */
- if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
- (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
- (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
- /* Disable SWBA interrupt */
- sc->sc_ah->imask &= ~ATH9K_INT_SWBA;
- ath9k_ps_wakeup(sc);
- ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask);
- ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
- ath9k_ps_restore(sc);
- tasklet_kill(&sc->bcon_tasklet);
- }
-
- ath_beacon_return(sc, avp);
- sc->sc_flags &= ~SC_OP_BEACONS;
-
- if (sc->nbcnvifs) {
- /* Re-enable SWBA interrupt */
- sc->sc_ah->imask |= ATH9K_INT_SWBA;
- ath9k_ps_wakeup(sc);
- ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask);
- ath9k_ps_restore(sc);
- }
+ if (ath9k_uses_beacons(vif->type))
+ ath9k_reclaim_beacon(sc, vif);
- sc->nvifs--;
+ ath9k_calculate_summary_state(hw, NULL);
mutex_unlock(&sc->mutex);
}
static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
+ struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_conf *conf = &hw->conf;
- bool disable_radio;
+ bool disable_radio = false;
mutex_lock(&sc->mutex);
* the end.
*/
if (changed & IEEE80211_CONF_CHANGE_IDLE) {
- bool enable_radio;
- bool all_wiphys_idle;
- bool idle = !!(conf->flags & IEEE80211_CONF_IDLE);
-
- spin_lock_bh(&sc->wiphy_lock);
- all_wiphys_idle = ath9k_all_wiphys_idle(sc);
- ath9k_set_wiphy_idle(aphy, idle);
-
- enable_radio = (!idle && all_wiphys_idle);
-
- /*
- * After we unlock here its possible another wiphy
- * can be re-renabled so to account for that we will
- * only disable the radio toward the end of this routine
- * if by then all wiphys are still idle.
- */
- spin_unlock_bh(&sc->wiphy_lock);
-
- if (enable_radio) {
- sc->ps_idle = false;
+ sc->ps_idle = !!(conf->flags & IEEE80211_CONF_IDLE);
+ if (!sc->ps_idle) {
ath_radio_enable(sc, hw);
- ath_print(common, ATH_DBG_CONFIG,
- "not-idle: enabling radio\n");
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "not-idle: enabling radio\n");
+ } else {
+ disable_radio = true;
}
}
if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
if (conf->flags & IEEE80211_CONF_MONITOR) {
- ath_print(common, ATH_DBG_CONFIG,
- "Monitor mode is enabled\n");
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "Monitor mode is enabled\n");
sc->sc_ah->is_monitoring = true;
} else {
- ath_print(common, ATH_DBG_CONFIG,
- "Monitor mode is disabled\n");
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "Monitor mode is disabled\n");
sc->sc_ah->is_monitoring = false;
}
}
if (ah->curchan)
old_pos = ah->curchan - &ah->channels[0];
- aphy->chan_idx = pos;
- aphy->chan_is_ht = conf_is_ht(conf);
if (hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
sc->sc_flags |= SC_OP_OFFCHANNEL;
else
sc->sc_flags &= ~SC_OP_OFFCHANNEL;
- if (aphy->state == ATH_WIPHY_SCAN ||
- aphy->state == ATH_WIPHY_ACTIVE)
- ath9k_wiphy_pause_all_forced(sc, aphy);
- else {
- /*
- * Do not change operational channel based on a paused
- * wiphy changes.
- */
- goto skip_chan_change;
- }
-
- ath_print(common, ATH_DBG_CONFIG, "Set channel: %d MHz\n",
- curchan->center_freq);
+ ath_dbg(common, ATH_DBG_CONFIG, "Set channel: %d MHz\n",
+ curchan->center_freq);
- /* XXX: remove me eventualy */
- ath9k_update_ichannel(sc, hw, &sc->sc_ah->channels[pos]);
-
- ath_update_chainmask(sc, conf_is_ht(conf));
+ ath9k_cmn_update_ichannel(&sc->sc_ah->channels[pos],
+ curchan, conf->channel_type);
/* update survey stats for the old channel before switching */
spin_lock_irqsave(&common->cc_lock, flags);
}
if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) {
- ath_print(common, ATH_DBG_FATAL,
- "Unable to set channel\n");
+ ath_err(common, "Unable to set channel\n");
mutex_unlock(&sc->mutex);
return -EINVAL;
}
ath_update_survey_nf(sc, old_pos);
}
-skip_chan_change:
if (changed & IEEE80211_CONF_CHANGE_POWER) {
sc->config.txpowlimit = 2 * conf->power_level;
+ ath9k_ps_wakeup(sc);
ath_update_txpow(sc);
+ ath9k_ps_restore(sc);
}
- spin_lock_bh(&sc->wiphy_lock);
- disable_radio = ath9k_all_wiphys_idle(sc);
- spin_unlock_bh(&sc->wiphy_lock);
-
if (disable_radio) {
- ath_print(common, ATH_DBG_CONFIG, "idle: disabling radio\n");
- sc->ps_idle = true;
+ ath_dbg(common, ATH_DBG_CONFIG, "idle: disabling radio\n");
ath_radio_disable(sc, hw);
}
unsigned int *total_flags,
u64 multicast)
{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
+ struct ath_softc *sc = hw->priv;
u32 rfilt;
changed_flags &= SUPPORTED_FILTERS;
ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
ath9k_ps_restore(sc);
- ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
- "Set HW RX filter: 0x%x\n", rfilt);
+ ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
+ "Set HW RX filter: 0x%x\n", rfilt);
}
static int ath9k_sta_add(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
+ struct ath_softc *sc = hw->priv;
ath_node_attach(sc, sta);
struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
+ struct ath_softc *sc = hw->priv;
ath_node_detach(sc, sta);
static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue,
const struct ieee80211_tx_queue_params *params)
{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
+ struct ath_softc *sc = hw->priv;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ struct ath_txq *txq;
struct ath9k_tx_queue_info qi;
- int ret = 0, qnum;
+ int ret = 0;
if (queue >= WME_NUM_AC)
return 0;
+ txq = sc->tx.txq_map[queue];
+
mutex_lock(&sc->mutex);
memset(&qi, 0, sizeof(struct ath9k_tx_queue_info));
qi.tqi_cwmin = params->cw_min;
qi.tqi_cwmax = params->cw_max;
qi.tqi_burstTime = params->txop;
- qnum = ath_get_hal_qnum(queue, sc);
- ath_print(common, ATH_DBG_CONFIG,
- "Configure tx [queue/halq] [%d/%d], "
- "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
- queue, qnum, params->aifs, params->cw_min,
- params->cw_max, params->txop);
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "Configure tx [queue/halq] [%d/%d], aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
+ queue, txq->axq_qnum, params->aifs, params->cw_min,
+ params->cw_max, params->txop);
- ret = ath_txq_update(sc, qnum, &qi);
+ ret = ath_txq_update(sc, txq->axq_qnum, &qi);
if (ret)
- ath_print(common, ATH_DBG_FATAL, "TXQ Update failed\n");
+ ath_err(common, "TXQ Update failed\n");
if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC)
- if ((qnum == sc->tx.hwq_map[WME_AC_BE]) && !ret)
+ if (queue == WME_AC_BE && !ret)
ath_beaconq_config(sc);
mutex_unlock(&sc->mutex);
struct ieee80211_sta *sta,
struct ieee80211_key_conf *key)
{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
+ struct ath_softc *sc = hw->priv;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
int ret = 0;
- if (modparam_nohwcrypt)
+ if (ath9k_modparam_nohwcrypt)
return -ENOSPC;
mutex_lock(&sc->mutex);
ath9k_ps_wakeup(sc);
- ath_print(common, ATH_DBG_CONFIG, "Set HW Key\n");
+ ath_dbg(common, ATH_DBG_CONFIG, "Set HW Key\n");
switch (cmd) {
case SET_KEY:
struct ieee80211_bss_conf *bss_conf,
u32 changed)
{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
+ struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath_vif *avp = (void *)vif->drv_priv;
/* Set aggregation protection mode parameters */
sc->config.ath_aggr_prot = 0;
- /* Only legacy IBSS for now */
- if (vif->type == NL80211_IFTYPE_ADHOC)
- ath_update_chainmask(sc, 0);
-
- ath_print(common, ATH_DBG_CONFIG,
- "BSSID: %pM aid: 0x%x\n",
- common->curbssid, common->curaid);
+ ath_dbg(common, ATH_DBG_CONFIG, "BSSID: %pM aid: 0x%x\n",
+ common->curbssid, common->curaid);
/* need to reconfigure the beacon */
sc->sc_flags &= ~SC_OP_BEACONS ;
if ((changed & BSS_CHANGED_BEACON) ||
((changed & BSS_CHANGED_BEACON_ENABLED) && bss_conf->enable_beacon)) {
ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
- error = ath_beacon_alloc(aphy, vif);
+ error = ath_beacon_alloc(sc, vif);
if (!error)
ath_beacon_config(sc, vif);
}
if (vif->type == NL80211_IFTYPE_AP) {
sc->sc_flags |= SC_OP_TSF_RESET;
ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
- error = ath_beacon_alloc(aphy, vif);
+ error = ath_beacon_alloc(sc, vif);
if (!error)
ath_beacon_config(sc, vif);
} else {
}
if (changed & BSS_CHANGED_ERP_PREAMBLE) {
- ath_print(common, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
- bss_conf->use_short_preamble);
+ ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
+ bss_conf->use_short_preamble);
if (bss_conf->use_short_preamble)
sc->sc_flags |= SC_OP_PREAMBLE_SHORT;
else
}
if (changed & BSS_CHANGED_ERP_CTS_PROT) {
- ath_print(common, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n",
- bss_conf->use_cts_prot);
+ ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n",
+ bss_conf->use_cts_prot);
if (bss_conf->use_cts_prot &&
hw->conf.channel->band != IEEE80211_BAND_5GHZ)
sc->sc_flags |= SC_OP_PROTECT_ENABLE;
}
if (changed & BSS_CHANGED_ASSOC) {
- ath_print(common, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
+ ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
bss_conf->assoc);
- ath9k_bss_assoc_info(sc, vif, bss_conf);
+ ath9k_bss_assoc_info(sc, hw, vif, bss_conf);
}
mutex_unlock(&sc->mutex);
static u64 ath9k_get_tsf(struct ieee80211_hw *hw)
{
+ struct ath_softc *sc = hw->priv;
u64 tsf;
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
mutex_lock(&sc->mutex);
+ ath9k_ps_wakeup(sc);
tsf = ath9k_hw_gettsf64(sc->sc_ah);
+ ath9k_ps_restore(sc);
mutex_unlock(&sc->mutex);
return tsf;
static void ath9k_set_tsf(struct ieee80211_hw *hw, u64 tsf)
{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
+ struct ath_softc *sc = hw->priv;
mutex_lock(&sc->mutex);
+ ath9k_ps_wakeup(sc);
ath9k_hw_settsf64(sc->sc_ah, tsf);
+ ath9k_ps_restore(sc);
mutex_unlock(&sc->mutex);
}
static void ath9k_reset_tsf(struct ieee80211_hw *hw)
{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
+ struct ath_softc *sc = hw->priv;
mutex_lock(&sc->mutex);
struct ieee80211_vif *vif,
enum ieee80211_ampdu_mlme_action action,
struct ieee80211_sta *sta,
- u16 tid, u16 *ssn)
+ u16 tid, u16 *ssn, u8 buf_size)
{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
+ struct ath_softc *sc = hw->priv;
int ret = 0;
local_bh_disable();
case IEEE80211_AMPDU_RX_STOP:
break;
case IEEE80211_AMPDU_TX_START:
+ if (!(sc->sc_flags & SC_OP_TXAGGR))
+ return -EOPNOTSUPP;
+
ath9k_ps_wakeup(sc);
ret = ath_tx_aggr_start(sc, sta, tid, ssn);
if (!ret)
ath9k_ps_restore(sc);
break;
default:
- ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
- "Unknown AMPDU action\n");
+ ath_err(ath9k_hw_common(sc->sc_ah), "Unknown AMPDU action\n");
}
local_bh_enable();
static int ath9k_get_survey(struct ieee80211_hw *hw, int idx,
struct survey_info *survey)
{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
+ struct ath_softc *sc = hw->priv;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
return 0;
}
-static void ath9k_sw_scan_start(struct ieee80211_hw *hw)
-{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
-
- mutex_lock(&sc->mutex);
- if (ath9k_wiphy_scanning(sc)) {
- /*
- * There is a race here in mac80211 but fixing it requires
- * we revisit how we handle the scan complete callback.
- * After mac80211 fixes we will not have configured hardware
- * to the home channel nor would we have configured the RX
- * filter yet.
- */
- mutex_unlock(&sc->mutex);
- return;
- }
-
- aphy->state = ATH_WIPHY_SCAN;
- ath9k_wiphy_pause_all_forced(sc, aphy);
- mutex_unlock(&sc->mutex);
-}
-
-/*
- * XXX: this requires a revisit after the driver
- * scan_complete gets moved to another place/removed in mac80211.
- */
-static void ath9k_sw_scan_complete(struct ieee80211_hw *hw)
-{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
-
- mutex_lock(&sc->mutex);
- aphy->state = ATH_WIPHY_ACTIVE;
- mutex_unlock(&sc->mutex);
-}
-
static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
+ struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
mutex_lock(&sc->mutex);
.start = ath9k_start,
.stop = ath9k_stop,
.add_interface = ath9k_add_interface,
+ .change_interface = ath9k_change_interface,
.remove_interface = ath9k_remove_interface,
.config = ath9k_config,
.configure_filter = ath9k_configure_filter,
.reset_tsf = ath9k_reset_tsf,
.ampdu_action = ath9k_ampdu_action,
.get_survey = ath9k_get_survey,
- .sw_scan_start = ath9k_sw_scan_start,
- .sw_scan_complete = ath9k_sw_scan_complete,
.rfkill_poll = ath9k_rfkill_poll_state,
.set_coverage_class = ath9k_set_coverage_class,
};
git.openpandora.org / pandora-kernel.git / blobdiff