if (iter_data.n_stas > 1) {
/* If you have multiple STA interfaces connected to
* different APs, ARPs are not received (most of the time?)
- * Enabling PROMISC appears to fix that probem.
+ * Enabling PROMISC appears to fix that problem.
*/
sc->filter_flags |= AR5K_RX_FILTER_PROM;
}
INIT_LIST_HEAD(&sc->txbuf);
sc->txbuf_len = ATH_TXBUF;
- for (i = 0; i < ATH_TXBUF; i++, bf++, ds++,
- da += sizeof(*ds)) {
+ for (i = 0; i < ATH_TXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
bf->desc = ds;
bf->daddr = da;
list_add_tail(&bf->list, &sc->txbuf);
goto err;
if (sc->opmode == NL80211_IFTYPE_AP ||
- sc->opmode == NL80211_IFTYPE_MESH_POINT) {
+ sc->opmode == NL80211_IFTYPE_MESH_POINT) {
/*
* Always burst out beacon and CAB traffic
* (aifs = cwmin = cwmax = 0)
*/
static int ath5k_common_padpos(struct sk_buff *skb)
{
- struct ieee80211_hdr * hdr = (struct ieee80211_hdr *)skb->data;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
__le16 frame_control = hdr->frame_control;
int padpos = 24;
- if (ieee80211_has_a4(frame_control)) {
+ if (ieee80211_has_a4(frame_control))
padpos += ETH_ALEN;
- }
- if (ieee80211_is_data_qos(frame_control)) {
+
+ if (ieee80211_is_data_qos(frame_control))
padpos += IEEE80211_QOS_CTL_LEN;
- }
return padpos;
}
int padpos = ath5k_common_padpos(skb);
int padsize = padpos & 3;
- if (padsize && skb->len>padpos) {
+ if (padsize && skb->len > padpos) {
if (skb_headroom(skb) < padsize)
return -1;
skb_push(skb, padsize);
- memmove(skb->data, skb->data+padsize, padpos);
+ memmove(skb->data, skb->data + padsize, padpos);
return padsize;
}
int padpos = ath5k_common_padpos(skb);
int padsize = padpos & 3;
- if (padsize && skb->len>=padpos+padsize) {
+ if (padsize && skb->len >= padpos + padsize) {
memmove(skb->data + padsize, skb->data, padpos);
skb_pull(skb, padsize);
return padsize;
* timestamp (beginning of phy frame, data frame, end of rx?).
* The only thing we know is that it is hardware specific...
* On AR5213 it seems the rx timestamp is at the end of the
- * frame, but i'm not sure.
+ * frame, but I'm not sure.
*
* NOTE: mac80211 defines mactime at the beginning of the first
* data symbol. Since we don't have any time references it's
static void
ath5k_set_current_imask(struct ath5k_softc *sc)
{
- enum ath5k_int imask = sc->imask;
+ enum ath5k_int imask;
unsigned long flags;
spin_lock_irqsave(&sc->irqlock, flags);
+ imask = sc->imask;
if (sc->rx_pending)
imask &= ~AR5K_INT_RX_ALL;
if (sc->tx_pending)
goto drop_packet;
}
- if (txq->txq_len >= txq->txq_max)
+ if (txq->txq_len >= txq->txq_max &&
+ txq->qnum <= AR5K_TX_QUEUE_ID_DATA_MAX)
ieee80211_stop_queue(hw, txq->qnum);
spin_lock_irqsave(&sc->txbuflock, flags);
int i;
struct ath5k_softc *sc = (void *)data;
- for (i=0; i < AR5K_NUM_TX_QUEUES; i++)
+ for (i = 0; i < AR5K_NUM_TX_QUEUES; i++)
if (sc->txqs[i].setup && (sc->ah->ah_txq_isr & BIT(i)))
ath5k_tx_processq(sc, &sc->txqs[i]);
* 4 beacons to make sure everybody hears our AP.
* When a client tries to associate, hw will keep
* track of the tx antenna to be used for this client
- * automaticaly, based on ACKed packets.
+ * automatically, based on ACKed packets.
*
* Note: AP still listens and transmits RTS on the
* default antenna which is supposed to be an omni.
avf = (void *)vif->drv_priv;
bf = avf->bbuf;
if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION ||
- sc->opmode == NL80211_IFTYPE_MONITOR)) {
+ sc->opmode == NL80211_IFTYPE_MONITOR)) {
ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
return;
}
/* refresh the beacon for AP or MESH mode */
if (sc->opmode == NL80211_IFTYPE_AP ||
- sc->opmode == NL80211_IFTYPE_MESH_POINT)
+ sc->opmode == NL80211_IFTYPE_MESH_POINT)
ath5k_beacon_update(sc->hw, vif);
trace_ath5k_tx(sc, bf->skb, &sc->txqs[sc->bhalq]);
skb = ieee80211_get_buffered_bc(sc->hw, vif);
while (skb) {
ath5k_tx_queue(sc->hw, skb, sc->cabq);
+
+ if (sc->cabq->txq_len >= sc->cabq->txq_max)
+ break;
+
skb = ieee80211_get_buffered_bc(sc->hw, vif);
}
hw_tsf = ath5k_hw_get_tsf64(ah);
hw_tu = TSF_TO_TU(hw_tsf);
-#define FUDGE AR5K_TUNE_SW_BEACON_RESP + 3
+#define FUDGE (AR5K_TUNE_SW_BEACON_RESP + 3)
/* We use FUDGE to make sure the next TBTT is ahead of the current TU.
* Since we later subtract AR5K_TUNE_SW_BEACON_RESP (10) in the timer
* configuration we need to make sure it is bigger than that. */
*
* In IBSS mode we use this interrupt just to
* keep track of the next TBTT (target beacon
- * transmission time) in order to detect wether
+ * transmission time) in order to detect whether
* automatic TSF updates happened.
*/
if (sc->opmode == NL80211_IFTYPE_ADHOC) {
- /* XXX: only if VEOL suppported */
+ /* XXX: only if VEOL supported */
u64 tsf = ath5k_hw_get_tsf64(sc->ah);
sc->nexttbtt += sc->bintval;
ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
"rx overrun, resetting\n");
ieee80211_queue_work(sc->hw, &sc->reset_work);
- }
- else
+ } else
ath5k_schedule_rx(sc);
} else {
- if (status & AR5K_INT_SWBA) {
+ if (status & AR5K_INT_SWBA)
tasklet_hi_schedule(&sc->beacontq);
- }
+
if (status & AR5K_INT_RXEOL) {
/*
* NB: the hardware should re-read the link when
* Initialization routines *
\*************************/
-int
+int __devinit
ath5k_init_softc(struct ath5k_softc *sc, const struct ath_bus_ops *bus_ops)
{
struct ieee80211_hw *hw = sc->hw;
common->ah = sc->ah;
common->hw = hw;
common->priv = sc;
+ common->clockrate = 40;
/*
* Cache line size is used to size and align various
sc->ah->ah_radio_5ghz_revision),
sc->ah->ah_radio_5ghz_revision);
/* No 2GHz support (5110 and some
- * 5Ghz only cards) -> report 5Ghz radio */
+ * 5GHz only cards) -> report 5GHz radio */
} else if (!test_bit(AR5K_MODE_11B,
sc->ah->ah_capabilities.cap_mode)) {
ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
/* Multi chip radio (RF5111 - RF2111) ->
* report both 2GHz/5GHz radios */
else if (sc->ah->ah_radio_5ghz_revision &&
- sc->ah->ah_radio_2ghz_revision){
+ sc->ah->ah_radio_2ghz_revision) {
ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
ath5k_chip_name(AR5K_VERSION_RAD,
sc->ah->ah_radio_5ghz_revision),
fast = ((chan != NULL) && modparam_fastchanswitch) ? 1 : 0;
- ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, fast,
- skip_pcu);
+ ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, fast, skip_pcu);
if (ret) {
ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
goto err;
ath5k_ani_init(ah, ani_mode);
- ah->ah_cal_next_full = jiffies;
+ ah->ah_cal_next_full = jiffies + msecs_to_jiffies(100);
ah->ah_cal_next_ani = jiffies;
ah->ah_cal_next_nf = jiffies;
ewma_init(&ah->ah_beacon_rssi_avg, 1024, 8);
mutex_unlock(&sc->lock);
}
-static int
+static int __devinit
ath5k_init(struct ieee80211_hw *hw)
{
/*
* Collect the channel list. The 802.11 layer
- * is resposible for filtering this list based
+ * is responsible for filtering this list based
* on settings like the phy mode and regulatory
* domain restrictions.
*/
git.openpandora.org / pandora-kernel.git / blobdiff