#include <linux/jiffies.h>
#include <linux/firmware.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>
.ndo_validate_addr = eth_validate_addr,
};
-/*======================================================================
-
- smc91c92_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int smc91c92_probe(struct pcmcia_device *link)
{
struct smc_private *smc;
link->priv = dev;
spin_lock_init(&smc->lock);
- link->resource[0]->end = 16;
- link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
- link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
/* The SMC91c92-specific entries in the device structure. */
dev->netdev_ops = &smc_netdev_ops;
return smc91c92_config(link);
} /* smc91c92_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void smc91c92_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
mdelay(200);
/* Now read and write the COR... */
- tmp = readb(smc->base + link->conf.ConfigBase + CISREG_COR);
+ tmp = readb(smc->base + link->config_base + CISREG_COR);
udelay(5);
- writeb(tmp, smc->base + link->conf.ConfigBase + CISREG_COR);
+ writeb(tmp, smc->base + link->config_base + CISREG_COR);
return 0;
}
-static int mhz_mfc_config_check(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cf,
- cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
- void *priv_data)
+static int mhz_mfc_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
int k;
- p_dev->resource[1]->start = cf->io.win[0].base;
+ p_dev->io_lines = 16;
+ p_dev->resource[1]->start = p_dev->resource[0]->start;
+ p_dev->resource[1]->end = 8;
+ p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[0]->end = 16;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
for (k = 0; k < 0x400; k += 0x10) {
if (k & 0x80)
continue;
p_dev->resource[0]->start = k ^ 0x300;
- p_dev->io_lines = 16;
if (!pcmcia_request_io(p_dev))
return 0;
}
{
struct net_device *dev = link->priv;
struct smc_private *smc = netdev_priv(dev);
- win_req_t req;
unsigned int offset;
int i;
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
- link->resource[1]->end = 8;
+ link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ |
+ CONF_AUTO_SET_IO;
/* The Megahertz combo cards have modem-like CIS entries, so
we have to explicitly try a bunch of port combinations. */
dev->base_addr = link->resource[0]->start;
/* Allocate a memory window, for accessing the ISR */
- req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
- req.Base = req.Size = 0;
- req.AccessSpeed = 0;
- i = pcmcia_request_window(link, &req, &link->win);
+ link->resource[2]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
+ link->resource[2]->start = link->resource[2]->end = 0;
+ i = pcmcia_request_window(link, link->resource[2], 0);
if (i != 0)
return -ENODEV;
- smc->base = ioremap(req.Base, req.Size);
- offset = (smc->manfid == MANFID_MOTOROLA) ? link->conf.ConfigBase : 0;
- i = pcmcia_map_mem_page(link, link->win, offset);
+ smc->base = ioremap(link->resource[2]->start,
+ resource_size(link->resource[2]));
+ offset = (smc->manfid == MANFID_MOTOROLA) ? link->config_base : 0;
+ i = pcmcia_map_mem_page(link, link->resource[2], offset);
if ((i == 0) &&
(smc->manfid == MANFID_MEGAHERTZ) &&
(smc->cardid == PRODID_MEGAHERTZ_EM3288))
/*====================================================================*/
-static int smc_configcheck(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cf,
- cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
- void *priv_data)
+static int smc_configcheck(struct pcmcia_device *p_dev, void *priv_data)
{
- p_dev->resource[0]->start = cf->io.win[0].base;
- p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->end = 16;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+
return pcmcia_request_io(p_dev);
}
struct net_device *dev = link->priv;
int i;
- link->resource[0]->end = 16;
+ link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
+
i = pcmcia_loop_config(link, smc_configcheck, NULL);
if (!i)
dev->base_addr = link->resource[0]->start;
static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
int i, j;
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
+ link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ;
link->resource[0]->end = 64;
link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
link->resource[1]->end = 8;
/* Enable Hard Decode, LAN, Modem */
- link->conf.ConfigIndex = 0x23;
link->io_lines = 16;
+ link->config_index = 0x23;
for (i = j = 0; j < 4; j++) {
link->resource[1]->start = com[j];
}
if (i != 0) {
/* Fallback: turn off hard decode */
- link->conf.ConfigIndex = 0x03;
+ link->config_index = 0x03;
link->resource[1]->end = 0;
i = pcmcia_request_io(link);
}
}
if (width) {
- modconf_t mod = {
- .Attributes = CONF_IO_CHANGE_WIDTH,
- };
pr_info("using 8-bit IO window\n");
smc91c92_suspend(link);
- pcmcia_modify_configuration(link, &mod);
+ pcmcia_fixup_iowidth(link);
smc91c92_resume(link);
return check_sig(link);
}
return -ENODEV;
}
-/*======================================================================
-
- smc91c92_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-
-======================================================================*/
-
static int smc91c92_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
i = pcmcia_request_irq(link, smc_interrupt);
if (i)
goto config_failed;
- i = pcmcia_request_configuration(link, &link->conf);
+ i = pcmcia_enable_device(link);
if (i)
goto config_failed;
return -ENODEV;
} /* smc91c92_config */
-/*======================================================================
-
- After a card is removed, smc91c92_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void smc91c92_release(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "smc91c92_release\n");
- if (link->win) {
+ if (link->resource[2]->end) {
struct net_device *dev = link->priv;
struct smc_private *smc = netdev_priv(dev);
iounmap(smc->base);
static struct pcmcia_driver smc91c92_cs_driver = {
.owner = THIS_MODULE,
- .drv = {
- .name = "smc91c92_cs",
- },
+ .name = "smc91c92_cs",
.probe = smc91c92_probe,
.remove = smc91c92_detach,
.id_table = smc91c92_ids,
git.openpandora.org / pandora-kernel.git / blobdiff