--- /dev/null
+/* bnx2x_cmn.c: Broadcom Everest network driver.
+ *
+ * Copyright (c) 2007-2011 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Eliezer Tamir
+ * Based on code from Michael Chan's bnx2 driver
+ * UDP CSUM errata workaround by Arik Gendelman
+ * Slowpath and fastpath rework by Vladislav Zolotarov
+ * Statistics and Link management by Yitchak Gertner
+ *
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
+#include <linux/interrupt.h>
+#include <linux/ip.h>
+#include <net/ipv6.h>
+#include <net/ip6_checksum.h>
+#include <linux/firmware.h>
+#include <linux/prefetch.h>
+#include "bnx2x_cmn.h"
+#include "bnx2x_init.h"
+#include "bnx2x_sp.h"
+
+
+
+/**
+ * bnx2x_bz_fp - zero content of the fastpath structure.
+ *
+ * @bp: driver handle
+ * @index: fastpath index to be zeroed
+ *
+ * Makes sure the contents of the bp->fp[index].napi is kept
+ * intact.
+ */
+static inline void bnx2x_bz_fp(struct bnx2x *bp, int index)
+{
+ struct bnx2x_fastpath *fp = &bp->fp[index];
+ struct napi_struct orig_napi = fp->napi;
+ /* bzero bnx2x_fastpath contents */
+ memset(fp, 0, sizeof(*fp));
+
+ /* Restore the NAPI object as it has been already initialized */
+ fp->napi = orig_napi;
+
+ fp->bp = bp;
+ fp->index = index;
+ if (IS_ETH_FP(fp))
+ fp->max_cos = bp->max_cos;
+ else
+ /* Special queues support only one CoS */
+ fp->max_cos = 1;
+
+ /*
+ * set the tpa flag for each queue. The tpa flag determines the queue
+ * minimal size so it must be set prior to queue memory allocation
+ */
+ fp->disable_tpa = ((bp->flags & TPA_ENABLE_FLAG) == 0);
+
+#ifdef BCM_CNIC
+ /* We don't want TPA on FCoE, FWD and OOO L2 rings */
+ bnx2x_fcoe(bp, disable_tpa) = 1;
+#endif
+}
+
+/**
+ * bnx2x_move_fp - move content of the fastpath structure.
+ *
+ * @bp: driver handle
+ * @from: source FP index
+ * @to: destination FP index
+ *
+ * Makes sure the contents of the bp->fp[to].napi is kept
+ * intact.
+ */
+static inline void bnx2x_move_fp(struct bnx2x *bp, int from, int to)
+{
+ struct bnx2x_fastpath *from_fp = &bp->fp[from];
+ struct bnx2x_fastpath *to_fp = &bp->fp[to];
+ struct napi_struct orig_napi = to_fp->napi;
+ /* Move bnx2x_fastpath contents */
+ memcpy(to_fp, from_fp, sizeof(*to_fp));
+ to_fp->index = to;
+
+ /* Restore the NAPI object as it has been already initialized */
+ to_fp->napi = orig_napi;
+}
+
+int load_count[2][3] = { {0} }; /* per-path: 0-common, 1-port0, 2-port1 */
+
+/* free skb in the packet ring at pos idx
+ * return idx of last bd freed
+ */
+static u16 bnx2x_free_tx_pkt(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata,
+ u16 idx)
+{
+ struct sw_tx_bd *tx_buf = &txdata->tx_buf_ring[idx];
+ struct eth_tx_start_bd *tx_start_bd;
+ struct eth_tx_bd *tx_data_bd;
+ struct sk_buff *skb = tx_buf->skb;
+ u16 bd_idx = TX_BD(tx_buf->first_bd), new_cons;
+ int nbd;
+
+ /* prefetch skb end pointer to speedup dev_kfree_skb() */
+ prefetch(&skb->end);
+
+ DP(BNX2X_MSG_FP, "fp[%d]: pkt_idx %d buff @(%p)->skb %p\n",
+ txdata->txq_index, idx, tx_buf, skb);
+
+ /* unmap first bd */
+ DP(BNX2X_MSG_OFF, "free bd_idx %d\n", bd_idx);
+ tx_start_bd = &txdata->tx_desc_ring[bd_idx].start_bd;
+ dma_unmap_single(&bp->pdev->dev, BD_UNMAP_ADDR(tx_start_bd),
+ BD_UNMAP_LEN(tx_start_bd), DMA_TO_DEVICE);
+
+
+ nbd = le16_to_cpu(tx_start_bd->nbd) - 1;
+#ifdef BNX2X_STOP_ON_ERROR
+ if ((nbd - 1) > (MAX_SKB_FRAGS + 2)) {
+ BNX2X_ERR("BAD nbd!\n");
+ bnx2x_panic();
+ }
+#endif
+ new_cons = nbd + tx_buf->first_bd;
+
+ /* Get the next bd */
+ bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
+
+ /* Skip a parse bd... */
+ --nbd;
+ bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
+
+ /* ...and the TSO split header bd since they have no mapping */
+ if (tx_buf->flags & BNX2X_TSO_SPLIT_BD) {
+ --nbd;
+ bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
+ }
+
+ /* now free frags */
+ while (nbd > 0) {
+
+ DP(BNX2X_MSG_OFF, "free frag bd_idx %d\n", bd_idx);
+ tx_data_bd = &txdata->tx_desc_ring[bd_idx].reg_bd;
+ dma_unmap_page(&bp->pdev->dev, BD_UNMAP_ADDR(tx_data_bd),
+ BD_UNMAP_LEN(tx_data_bd), DMA_TO_DEVICE);
+ if (--nbd)
+ bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
+ }
+
+ /* release skb */
+ WARN_ON(!skb);
+ dev_kfree_skb_any(skb);
+ tx_buf->first_bd = 0;
+ tx_buf->skb = NULL;
+
+ return new_cons;
+}
+
+int bnx2x_tx_int(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata)
+{
+ struct netdev_queue *txq;
+ u16 hw_cons, sw_cons, bd_cons = txdata->tx_bd_cons;
+
+#ifdef BNX2X_STOP_ON_ERROR
+ if (unlikely(bp->panic))
+ return -1;
+#endif
+
+ txq = netdev_get_tx_queue(bp->dev, txdata->txq_index);
+ hw_cons = le16_to_cpu(*txdata->tx_cons_sb);
+ sw_cons = txdata->tx_pkt_cons;
+
+ while (sw_cons != hw_cons) {
+ u16 pkt_cons;
+
+ pkt_cons = TX_BD(sw_cons);
+
+ DP(NETIF_MSG_TX_DONE, "queue[%d]: hw_cons %u sw_cons %u "
+ " pkt_cons %u\n",
+ txdata->txq_index, hw_cons, sw_cons, pkt_cons);
+
+ bd_cons = bnx2x_free_tx_pkt(bp, txdata, pkt_cons);
+ sw_cons++;
+ }
+
+ txdata->tx_pkt_cons = sw_cons;
+ txdata->tx_bd_cons = bd_cons;
+
+ /* Need to make the tx_bd_cons update visible to start_xmit()
+ * before checking for netif_tx_queue_stopped(). Without the
+ * memory barrier, there is a small possibility that
+ * start_xmit() will miss it and cause the queue to be stopped
+ * forever.
+ * On the other hand we need an rmb() here to ensure the proper
+ * ordering of bit testing in the following
+ * netif_tx_queue_stopped(txq) call.
+ */
+ smp_mb();
+
+ if (unlikely(netif_tx_queue_stopped(txq))) {
+ /* Taking tx_lock() is needed to prevent reenabling the queue
+ * while it's empty. This could have happen if rx_action() gets
+ * suspended in bnx2x_tx_int() after the condition before
+ * netif_tx_wake_queue(), while tx_action (bnx2x_start_xmit()):
+ *
+ * stops the queue->sees fresh tx_bd_cons->releases the queue->
+ * sends some packets consuming the whole queue again->
+ * stops the queue
+ */
+
+ __netif_tx_lock(txq, smp_processor_id());
+
+ if ((netif_tx_queue_stopped(txq)) &&
+ (bp->state == BNX2X_STATE_OPEN) &&
+ (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3))
+ netif_tx_wake_queue(txq);
+
+ __netif_tx_unlock(txq);
+ }
+ return 0;
+}
+
+static inline void bnx2x_update_last_max_sge(struct bnx2x_fastpath *fp,
+ u16 idx)
+{
+ u16 last_max = fp->last_max_sge;
+
+ if (SUB_S16(idx, last_max) > 0)
+ fp->last_max_sge = idx;
+}
+
+static void bnx2x_update_sge_prod(struct bnx2x_fastpath *fp,
+ struct eth_fast_path_rx_cqe *fp_cqe)
+{
+ struct bnx2x *bp = fp->bp;
+ u16 sge_len = SGE_PAGE_ALIGN(le16_to_cpu(fp_cqe->pkt_len) -
+ le16_to_cpu(fp_cqe->len_on_bd)) >>
+ SGE_PAGE_SHIFT;
+ u16 last_max, last_elem, first_elem;
+ u16 delta = 0;
+ u16 i;
+
+ if (!sge_len)
+ return;
+
+ /* First mark all used pages */
+ for (i = 0; i < sge_len; i++)
+ BIT_VEC64_CLEAR_BIT(fp->sge_mask,
+ RX_SGE(le16_to_cpu(fp_cqe->sgl_or_raw_data.sgl[i])));
+
+ DP(NETIF_MSG_RX_STATUS, "fp_cqe->sgl[%d] = %d\n",
+ sge_len - 1, le16_to_cpu(fp_cqe->sgl_or_raw_data.sgl[sge_len - 1]));
+
+ /* Here we assume that the last SGE index is the biggest */
+ prefetch((void *)(fp->sge_mask));
+ bnx2x_update_last_max_sge(fp,
+ le16_to_cpu(fp_cqe->sgl_or_raw_data.sgl[sge_len - 1]));
+
+ last_max = RX_SGE(fp->last_max_sge);
+ last_elem = last_max >> BIT_VEC64_ELEM_SHIFT;
+ first_elem = RX_SGE(fp->rx_sge_prod) >> BIT_VEC64_ELEM_SHIFT;
+
+ /* If ring is not full */
+ if (last_elem + 1 != first_elem)
+ last_elem++;
+
+ /* Now update the prod */
+ for (i = first_elem; i != last_elem; i = NEXT_SGE_MASK_ELEM(i)) {
+ if (likely(fp->sge_mask[i]))
+ break;
+
+ fp->sge_mask[i] = BIT_VEC64_ELEM_ONE_MASK;
+ delta += BIT_VEC64_ELEM_SZ;
+ }
+
+ if (delta > 0) {
+ fp->rx_sge_prod += delta;
+ /* clear page-end entries */
+ bnx2x_clear_sge_mask_next_elems(fp);
+ }
+
+ DP(NETIF_MSG_RX_STATUS,
+ "fp->last_max_sge = %d fp->rx_sge_prod = %d\n",
+ fp->last_max_sge, fp->rx_sge_prod);
+}
+
+static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue,
+ struct sk_buff *skb, u16 cons, u16 prod,
+ struct eth_fast_path_rx_cqe *cqe)
+{
+ struct bnx2x *bp = fp->bp;
+ struct sw_rx_bd *cons_rx_buf = &fp->rx_buf_ring[cons];
+ struct sw_rx_bd *prod_rx_buf = &fp->rx_buf_ring[prod];
+ struct eth_rx_bd *prod_bd = &fp->rx_desc_ring[prod];
+ dma_addr_t mapping;
+ struct bnx2x_agg_info *tpa_info = &fp->tpa_info[queue];
+ struct sw_rx_bd *first_buf = &tpa_info->first_buf;
+
+ /* print error if current state != stop */
+ if (tpa_info->tpa_state != BNX2X_TPA_STOP)
+ BNX2X_ERR("start of bin not in stop [%d]\n", queue);
+
+ /* Try to map an empty skb from the aggregation info */
+ mapping = dma_map_single(&bp->pdev->dev,
+ first_buf->skb->data,
+ fp->rx_buf_size, DMA_FROM_DEVICE);
+ /*
+ * ...if it fails - move the skb from the consumer to the producer
+ * and set the current aggregation state as ERROR to drop it
+ * when TPA_STOP arrives.
+ */
+
+ if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
+ /* Move the BD from the consumer to the producer */
+ bnx2x_reuse_rx_skb(fp, cons, prod);
+ tpa_info->tpa_state = BNX2X_TPA_ERROR;
+ return;
+ }
+
+ /* move empty skb from pool to prod */
+ prod_rx_buf->skb = first_buf->skb;
+ dma_unmap_addr_set(prod_rx_buf, mapping, mapping);
+ /* point prod_bd to new skb */
+ prod_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
+ prod_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
+
+ /* move partial skb from cons to pool (don't unmap yet) */
+ *first_buf = *cons_rx_buf;
+
+ /* mark bin state as START */
+ tpa_info->parsing_flags =
+ le16_to_cpu(cqe->pars_flags.flags);
+ tpa_info->vlan_tag = le16_to_cpu(cqe->vlan_tag);
+ tpa_info->tpa_state = BNX2X_TPA_START;
+ tpa_info->len_on_bd = le16_to_cpu(cqe->len_on_bd);
+ tpa_info->placement_offset = cqe->placement_offset;
+
+#ifdef BNX2X_STOP_ON_ERROR
+ fp->tpa_queue_used |= (1 << queue);
+#ifdef _ASM_GENERIC_INT_L64_H
+ DP(NETIF_MSG_RX_STATUS, "fp->tpa_queue_used = 0x%lx\n",
+#else
+ DP(NETIF_MSG_RX_STATUS, "fp->tpa_queue_used = 0x%llx\n",
+#endif
+ fp->tpa_queue_used);
+#endif
+}
+
+/* Timestamp option length allowed for TPA aggregation:
+ *
+ * nop nop kind length echo val
+ */
+#define TPA_TSTAMP_OPT_LEN 12
+/**
+ * bnx2x_set_lro_mss - calculate the approximate value of the MSS
+ *
+ * @bp: driver handle
+ * @parsing_flags: parsing flags from the START CQE
+ * @len_on_bd: total length of the first packet for the
+ * aggregation.
+ *
+ * Approximate value of the MSS for this aggregation calculated using
+ * the first packet of it.
+ */
+static inline u16 bnx2x_set_lro_mss(struct bnx2x *bp, u16 parsing_flags,
+ u16 len_on_bd)
+{
+ /*
+ * TPA arrgregation won't have either IP options or TCP options
+ * other than timestamp or IPv6 extension headers.
+ */
+ u16 hdrs_len = ETH_HLEN + sizeof(struct tcphdr);
+
+ if (GET_FLAG(parsing_flags, PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) ==
+ PRS_FLAG_OVERETH_IPV6)
+ hdrs_len += sizeof(struct ipv6hdr);
+ else /* IPv4 */
+ hdrs_len += sizeof(struct iphdr);
+
+
+ /* Check if there was a TCP timestamp, if there is it's will
+ * always be 12 bytes length: nop nop kind length echo val.
+ *
+ * Otherwise FW would close the aggregation.
+ */
+ if (parsing_flags & PARSING_FLAGS_TIME_STAMP_EXIST_FLAG)
+ hdrs_len += TPA_TSTAMP_OPT_LEN;
+
+ return len_on_bd - hdrs_len;
+}
+
+static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp,
+ u16 queue, struct sk_buff *skb,
+ struct eth_end_agg_rx_cqe *cqe,
+ u16 cqe_idx)
+{
+ struct sw_rx_page *rx_pg, old_rx_pg;
+ u32 i, frag_len, frag_size, pages;
+ int err;
+ int j;
+ struct bnx2x_agg_info *tpa_info = &fp->tpa_info[queue];
+ u16 len_on_bd = tpa_info->len_on_bd;
+
+ frag_size = le16_to_cpu(cqe->pkt_len) - len_on_bd;
+ pages = SGE_PAGE_ALIGN(frag_size) >> SGE_PAGE_SHIFT;
+
+ /* This is needed in order to enable forwarding support */
+ if (frag_size)
+ skb_shinfo(skb)->gso_size = bnx2x_set_lro_mss(bp,
+ tpa_info->parsing_flags, len_on_bd);
+
+#ifdef BNX2X_STOP_ON_ERROR
+ if (pages > min_t(u32, 8, MAX_SKB_FRAGS)*SGE_PAGE_SIZE*PAGES_PER_SGE) {
+ BNX2X_ERR("SGL length is too long: %d. CQE index is %d\n",
+ pages, cqe_idx);
+ BNX2X_ERR("cqe->pkt_len = %d\n", cqe->pkt_len);
+ bnx2x_panic();
+ return -EINVAL;
+ }
+#endif
+
+ /* Run through the SGL and compose the fragmented skb */
+ for (i = 0, j = 0; i < pages; i += PAGES_PER_SGE, j++) {
+ u16 sge_idx = RX_SGE(le16_to_cpu(cqe->sgl_or_raw_data.sgl[j]));
+
+ /* FW gives the indices of the SGE as if the ring is an array
+ (meaning that "next" element will consume 2 indices) */
+ frag_len = min(frag_size, (u32)(SGE_PAGE_SIZE*PAGES_PER_SGE));
+ rx_pg = &fp->rx_page_ring[sge_idx];
+ old_rx_pg = *rx_pg;
+
+ /* If we fail to allocate a substitute page, we simply stop
+ where we are and drop the whole packet */
+ err = bnx2x_alloc_rx_sge(bp, fp, sge_idx);
+ if (unlikely(err)) {
+ fp->eth_q_stats.rx_skb_alloc_failed++;
+ return err;
+ }
+
+ /* Unmap the page as we r going to pass it to the stack */
+ dma_unmap_page(&bp->pdev->dev,
+ dma_unmap_addr(&old_rx_pg, mapping),
+ SGE_PAGE_SIZE*PAGES_PER_SGE, DMA_FROM_DEVICE);
+
+ /* Add one frag and update the appropriate fields in the skb */
+ skb_fill_page_desc(skb, j, old_rx_pg.page, 0, frag_len);
+
+ skb->data_len += frag_len;
+ skb->truesize += frag_len;
+ skb->len += frag_len;
+
+ frag_size -= frag_len;
+ }
+
+ return 0;
+}
+
+static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
+ u16 queue, struct eth_end_agg_rx_cqe *cqe,
+ u16 cqe_idx)
+{
+ struct bnx2x_agg_info *tpa_info = &fp->tpa_info[queue];
+ struct sw_rx_bd *rx_buf = &tpa_info->first_buf;
+ u8 pad = tpa_info->placement_offset;
+ u16 len = tpa_info->len_on_bd;
+ struct sk_buff *skb = rx_buf->skb;
+ /* alloc new skb */
+ struct sk_buff *new_skb;
+ u8 old_tpa_state = tpa_info->tpa_state;
+
+ tpa_info->tpa_state = BNX2X_TPA_STOP;
+
+ /* If we there was an error during the handling of the TPA_START -
+ * drop this aggregation.
+ */
+ if (old_tpa_state == BNX2X_TPA_ERROR)
+ goto drop;
+
+ /* Try to allocate the new skb */
+ new_skb = netdev_alloc_skb(bp->dev, fp->rx_buf_size);
+
+ /* Unmap skb in the pool anyway, as we are going to change
+ pool entry status to BNX2X_TPA_STOP even if new skb allocation
+ fails. */
+ dma_unmap_single(&bp->pdev->dev, dma_unmap_addr(rx_buf, mapping),
+ fp->rx_buf_size, DMA_FROM_DEVICE);
+
+ if (likely(new_skb)) {
+ prefetch(skb);
+ prefetch(((char *)(skb)) + L1_CACHE_BYTES);
+
+#ifdef BNX2X_STOP_ON_ERROR
+ if (pad + len > fp->rx_buf_size) {
+ BNX2X_ERR("skb_put is about to fail... "
+ "pad %d len %d rx_buf_size %d\n",
+ pad, len, fp->rx_buf_size);
+ bnx2x_panic();
+ return;
+ }
+#endif
+
+ skb_reserve(skb, pad);
+ skb_put(skb, len);
+
+ skb->protocol = eth_type_trans(skb, bp->dev);
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ if (!bnx2x_fill_frag_skb(bp, fp, queue, skb, cqe, cqe_idx)) {
+ if (tpa_info->parsing_flags & PARSING_FLAGS_VLAN)
+ __vlan_hwaccel_put_tag(skb, tpa_info->vlan_tag);
+ napi_gro_receive(&fp->napi, skb);
+ } else {
+ DP(NETIF_MSG_RX_STATUS, "Failed to allocate new pages"
+ " - dropping packet!\n");
+ dev_kfree_skb_any(skb);
+ }
+
+
+ /* put new skb in bin */
+ rx_buf->skb = new_skb;
+
+ return;
+ }
+
+drop:
+ /* drop the packet and keep the buffer in the bin */
+ DP(NETIF_MSG_RX_STATUS,
+ "Failed to allocate or map a new skb - dropping packet!\n");
+ fp->eth_q_stats.rx_skb_alloc_failed++;
+}
+
+/* Set Toeplitz hash value in the skb using the value from the
+ * CQE (calculated by HW).
+ */
+static inline void bnx2x_set_skb_rxhash(struct bnx2x *bp, union eth_rx_cqe *cqe,
+ struct sk_buff *skb)
+{
+ /* Set Toeplitz hash from CQE */
+ if ((bp->dev->features & NETIF_F_RXHASH) &&
+ (cqe->fast_path_cqe.status_flags &
+ ETH_FAST_PATH_RX_CQE_RSS_HASH_FLG))
+ skb->rxhash =
+ le32_to_cpu(cqe->fast_path_cqe.rss_hash_result);
+}
+
+int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
+{
+ struct bnx2x *bp = fp->bp;
+ u16 bd_cons, bd_prod, bd_prod_fw, comp_ring_cons;
+ u16 hw_comp_cons, sw_comp_cons, sw_comp_prod;
+ int rx_pkt = 0;
+
+#ifdef BNX2X_STOP_ON_ERROR
+ if (unlikely(bp->panic))
+ return 0;
+#endif
+
+ /* CQ "next element" is of the size of the regular element,
+ that's why it's ok here */
+ hw_comp_cons = le16_to_cpu(*fp->rx_cons_sb);
+ if ((hw_comp_cons & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
+ hw_comp_cons++;
+
+ bd_cons = fp->rx_bd_cons;
+ bd_prod = fp->rx_bd_prod;
+ bd_prod_fw = bd_prod;
+ sw_comp_cons = fp->rx_comp_cons;
+ sw_comp_prod = fp->rx_comp_prod;
+
+ /* Memory barrier necessary as speculative reads of the rx
+ * buffer can be ahead of the index in the status block
+ */
+ rmb();
+
+ DP(NETIF_MSG_RX_STATUS,
+ "queue[%d]: hw_comp_cons %u sw_comp_cons %u\n",
+ fp->index, hw_comp_cons, sw_comp_cons);
+
+ while (sw_comp_cons != hw_comp_cons) {
+ struct sw_rx_bd *rx_buf = NULL;
+ struct sk_buff *skb;
+ union eth_rx_cqe *cqe;
+ struct eth_fast_path_rx_cqe *cqe_fp;
+ u8 cqe_fp_flags;
+ enum eth_rx_cqe_type cqe_fp_type;
+ u16 len, pad;
+
+#ifdef BNX2X_STOP_ON_ERROR
+ if (unlikely(bp->panic))
+ return 0;
+#endif
+
+ comp_ring_cons = RCQ_BD(sw_comp_cons);
+ bd_prod = RX_BD(bd_prod);
+ bd_cons = RX_BD(bd_cons);
+
+ /* Prefetch the page containing the BD descriptor
+ at producer's index. It will be needed when new skb is
+ allocated */
+ prefetch((void *)(PAGE_ALIGN((unsigned long)
+ (&fp->rx_desc_ring[bd_prod])) -
+ PAGE_SIZE + 1));
+
+ cqe = &fp->rx_comp_ring[comp_ring_cons];
+ cqe_fp = &cqe->fast_path_cqe;
+ cqe_fp_flags = cqe_fp->type_error_flags;
+ cqe_fp_type = cqe_fp_flags & ETH_FAST_PATH_RX_CQE_TYPE;
+
+ DP(NETIF_MSG_RX_STATUS, "CQE type %x err %x status %x"
+ " queue %x vlan %x len %u\n", CQE_TYPE(cqe_fp_flags),
+ cqe_fp_flags, cqe_fp->status_flags,
+ le32_to_cpu(cqe_fp->rss_hash_result),
+ le16_to_cpu(cqe_fp->vlan_tag), le16_to_cpu(cqe_fp->pkt_len));
+
+ /* is this a slowpath msg? */
+ if (unlikely(CQE_TYPE_SLOW(cqe_fp_type))) {
+ bnx2x_sp_event(fp, cqe);
+ goto next_cqe;
+
+ /* this is an rx packet */
+ } else {
+ rx_buf = &fp->rx_buf_ring[bd_cons];
+ skb = rx_buf->skb;
+ prefetch(skb);
+
+ if (!CQE_TYPE_FAST(cqe_fp_type)) {
+#ifdef BNX2X_STOP_ON_ERROR
+ /* sanity check */
+ if (fp->disable_tpa &&
+ (CQE_TYPE_START(cqe_fp_type) ||
+ CQE_TYPE_STOP(cqe_fp_type)))
+ BNX2X_ERR("START/STOP packet while "
+ "disable_tpa type %x\n",
+ CQE_TYPE(cqe_fp_type));
+#endif
+
+ if (CQE_TYPE_START(cqe_fp_type)) {
+ u16 queue = cqe_fp->queue_index;
+ DP(NETIF_MSG_RX_STATUS,
+ "calling tpa_start on queue %d\n",
+ queue);
+
+ bnx2x_tpa_start(fp, queue, skb,
+ bd_cons, bd_prod,
+ cqe_fp);
+
+ /* Set Toeplitz hash for LRO skb */
+ bnx2x_set_skb_rxhash(bp, cqe, skb);
+
+ goto next_rx;
+
+ } else {
+ u16 queue =
+ cqe->end_agg_cqe.queue_index;
+ DP(NETIF_MSG_RX_STATUS,
+ "calling tpa_stop on queue %d\n",
+ queue);
+
+ bnx2x_tpa_stop(bp, fp, queue,
+ &cqe->end_agg_cqe,
+ comp_ring_cons);
+#ifdef BNX2X_STOP_ON_ERROR
+ if (bp->panic)
+ return 0;
+#endif
+
+ bnx2x_update_sge_prod(fp, cqe_fp);
+ goto next_cqe;
+ }
+ }
+ /* non TPA */
+ len = le16_to_cpu(cqe_fp->pkt_len);
+ pad = cqe_fp->placement_offset;
+ dma_sync_single_for_cpu(&bp->pdev->dev,
+ dma_unmap_addr(rx_buf, mapping),
+ pad + RX_COPY_THRESH,
+ DMA_FROM_DEVICE);
+ prefetch(((char *)(skb)) + L1_CACHE_BYTES);
+
+ /* is this an error packet? */
+ if (unlikely(cqe_fp_flags & ETH_RX_ERROR_FALGS)) {
+ DP(NETIF_MSG_RX_ERR,
+ "ERROR flags %x rx packet %u\n",
+ cqe_fp_flags, sw_comp_cons);
+ fp->eth_q_stats.rx_err_discard_pkt++;
+ goto reuse_rx;
+ }
+
+ /* Since we don't have a jumbo ring
+ * copy small packets if mtu > 1500
+ */
+ if ((bp->dev->mtu > ETH_MAX_PACKET_SIZE) &&
+ (len <= RX_COPY_THRESH)) {
+ struct sk_buff *new_skb;
+
+ new_skb = netdev_alloc_skb(bp->dev, len + pad);
+ if (new_skb == NULL) {
+ DP(NETIF_MSG_RX_ERR,
+ "ERROR packet dropped "
+ "because of alloc failure\n");
+ fp->eth_q_stats.rx_skb_alloc_failed++;
+ goto reuse_rx;
+ }
+
+ /* aligned copy */
+ skb_copy_from_linear_data_offset(skb, pad,
+ new_skb->data + pad, len);
+ skb_reserve(new_skb, pad);
+ skb_put(new_skb, len);
+
+ bnx2x_reuse_rx_skb(fp, bd_cons, bd_prod);
+
+ skb = new_skb;
+
+ } else
+ if (likely(bnx2x_alloc_rx_skb(bp, fp, bd_prod) == 0)) {
+ dma_unmap_single(&bp->pdev->dev,
+ dma_unmap_addr(rx_buf, mapping),
+ fp->rx_buf_size,
+ DMA_FROM_DEVICE);
+ skb_reserve(skb, pad);
+ skb_put(skb, len);
+
+ } else {
+ DP(NETIF_MSG_RX_ERR,
+ "ERROR packet dropped because "
+ "of alloc failure\n");
+ fp->eth_q_stats.rx_skb_alloc_failed++;
+reuse_rx:
+ bnx2x_reuse_rx_skb(fp, bd_cons, bd_prod);
+ goto next_rx;
+ }
+
+ skb->protocol = eth_type_trans(skb, bp->dev);
+
+ /* Set Toeplitz hash for a none-LRO skb */
+ bnx2x_set_skb_rxhash(bp, cqe, skb);
+
+ skb_checksum_none_assert(skb);
+
+ if (bp->dev->features & NETIF_F_RXCSUM) {
+
+ if (likely(BNX2X_RX_CSUM_OK(cqe)))
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ else
+ fp->eth_q_stats.hw_csum_err++;
+ }
+ }
+
+ skb_record_rx_queue(skb, fp->index);
+
+ if (le16_to_cpu(cqe_fp->pars_flags.flags) &
+ PARSING_FLAGS_VLAN)
+ __vlan_hwaccel_put_tag(skb,
+ le16_to_cpu(cqe_fp->vlan_tag));
+ napi_gro_receive(&fp->napi, skb);
+
+
+next_rx:
+ rx_buf->skb = NULL;
+
+ bd_cons = NEXT_RX_IDX(bd_cons);
+ bd_prod = NEXT_RX_IDX(bd_prod);
+ bd_prod_fw = NEXT_RX_IDX(bd_prod_fw);
+ rx_pkt++;
+next_cqe:
+ sw_comp_prod = NEXT_RCQ_IDX(sw_comp_prod);
+ sw_comp_cons = NEXT_RCQ_IDX(sw_comp_cons);
+
+ if (rx_pkt == budget)
+ break;
+ } /* while */
+
+ fp->rx_bd_cons = bd_cons;
+ fp->rx_bd_prod = bd_prod_fw;
+ fp->rx_comp_cons = sw_comp_cons;
+ fp->rx_comp_prod = sw_comp_prod;
+
+ /* Update producers */
+ bnx2x_update_rx_prod(bp, fp, bd_prod_fw, sw_comp_prod,
+ fp->rx_sge_prod);
+
+ fp->rx_pkt += rx_pkt;
+ fp->rx_calls++;
+
+ return rx_pkt;
+}
+
+static irqreturn_t bnx2x_msix_fp_int(int irq, void *fp_cookie)
+{
+ struct bnx2x_fastpath *fp = fp_cookie;
+ struct bnx2x *bp = fp->bp;
+ u8 cos;
+
+ DP(BNX2X_MSG_FP, "got an MSI-X interrupt on IDX:SB "
+ "[fp %d fw_sd %d igusb %d]\n",
+ fp->index, fp->fw_sb_id, fp->igu_sb_id);
+ bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID, 0, IGU_INT_DISABLE, 0);
+
+#ifdef BNX2X_STOP_ON_ERROR
+ if (unlikely(bp->panic))
+ return IRQ_HANDLED;
+#endif
+
+ /* Handle Rx and Tx according to MSI-X vector */
+ prefetch(fp->rx_cons_sb);
+
+ for_each_cos_in_tx_queue(fp, cos)
+ prefetch(fp->txdata[cos].tx_cons_sb);
+
+ prefetch(&fp->sb_running_index[SM_RX_ID]);
+ napi_schedule(&bnx2x_fp(bp, fp->index, napi));
+
+ return IRQ_HANDLED;
+}
+
+/* HW Lock for shared dual port PHYs */
+void bnx2x_acquire_phy_lock(struct bnx2x *bp)
+{
+ mutex_lock(&bp->port.phy_mutex);
+
+ if (bp->port.need_hw_lock)
+ bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_MDIO);
+}
+
+void bnx2x_release_phy_lock(struct bnx2x *bp)
+{
+ if (bp->port.need_hw_lock)
+ bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_MDIO);
+
+ mutex_unlock(&bp->port.phy_mutex);
+}
+
+/* calculates MF speed according to current linespeed and MF configuration */
+u16 bnx2x_get_mf_speed(struct bnx2x *bp)
+{
+ u16 line_speed = bp->link_vars.line_speed;
+ if (IS_MF(bp)) {
+ u16 maxCfg = bnx2x_extract_max_cfg(bp,
+ bp->mf_config[BP_VN(bp)]);
+
+ /* Calculate the current MAX line speed limit for the MF
+ * devices
+ */
+ if (IS_MF_SI(bp))
+ line_speed = (line_speed * maxCfg) / 100;
+ else { /* SD mode */
+ u16 vn_max_rate = maxCfg * 100;
+
+ if (vn_max_rate < line_speed)
+ line_speed = vn_max_rate;
+ }
+ }
+
+ return line_speed;
+}
+
+/**
+ * bnx2x_fill_report_data - fill link report data to report
+ *
+ * @bp: driver handle
+ * @data: link state to update
+ *
+ * It uses a none-atomic bit operations because is called under the mutex.
+ */
+static inline void bnx2x_fill_report_data(struct bnx2x *bp,
+ struct bnx2x_link_report_data *data)
+{
+ u16 line_speed = bnx2x_get_mf_speed(bp);
+
+ memset(data, 0, sizeof(*data));
+
+ /* Fill the report data: efective line speed */
+ data->line_speed = line_speed;
+
+ /* Link is down */
+ if (!bp->link_vars.link_up || (bp->flags & MF_FUNC_DIS))
+ __set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+ &data->link_report_flags);
+
+ /* Full DUPLEX */
+ if (bp->link_vars.duplex == DUPLEX_FULL)
+ __set_bit(BNX2X_LINK_REPORT_FD, &data->link_report_flags);
+
+ /* Rx Flow Control is ON */
+ if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX)
+ __set_bit(BNX2X_LINK_REPORT_RX_FC_ON, &data->link_report_flags);
+
+ /* Tx Flow Control is ON */
+ if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX)
+ __set_bit(BNX2X_LINK_REPORT_TX_FC_ON, &data->link_report_flags);
+}
+
+/**
+ * bnx2x_link_report - report link status to OS.
+ *
+ * @bp: driver handle
+ *
+ * Calls the __bnx2x_link_report() under the same locking scheme
+ * as a link/PHY state managing code to ensure a consistent link
+ * reporting.
+ */
+
+void bnx2x_link_report(struct bnx2x *bp)
+{
+ bnx2x_acquire_phy_lock(bp);
+ __bnx2x_link_report(bp);
+ bnx2x_release_phy_lock(bp);
+}
+
+/**
+ * __bnx2x_link_report - report link status to OS.
+ *
+ * @bp: driver handle
+ *
+ * None atomic inmlementation.
+ * Should be called under the phy_lock.
+ */
+void __bnx2x_link_report(struct bnx2x *bp)
+{
+ struct bnx2x_link_report_data cur_data;
+
+ /* reread mf_cfg */
+ if (!CHIP_IS_E1(bp))
+ bnx2x_read_mf_cfg(bp);
+
+ /* Read the current link report info */
+ bnx2x_fill_report_data(bp, &cur_data);
+
+ /* Don't report link down or exactly the same link status twice */
+ if (!memcmp(&cur_data, &bp->last_reported_link, sizeof(cur_data)) ||
+ (test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+ &bp->last_reported_link.link_report_flags) &&
+ test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+ &cur_data.link_report_flags)))
+ return;
+
+ bp->link_cnt++;
+
+ /* We are going to report a new link parameters now -
+ * remember the current data for the next time.
+ */
+ memcpy(&bp->last_reported_link, &cur_data, sizeof(cur_data));
+
+ if (test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+ &cur_data.link_report_flags)) {
+ netif_carrier_off(bp->dev);
+ netdev_err(bp->dev, "NIC Link is Down\n");
+ return;
+ } else {
+ netif_carrier_on(bp->dev);
+ netdev_info(bp->dev, "NIC Link is Up, ");
+ pr_cont("%d Mbps ", cur_data.line_speed);
+
+ if (test_and_clear_bit(BNX2X_LINK_REPORT_FD,
+ &cur_data.link_report_flags))
+ pr_cont("full duplex");
+ else
+ pr_cont("half duplex");
+
+ /* Handle the FC at the end so that only these flags would be
+ * possibly set. This way we may easily check if there is no FC
+ * enabled.
+ */
+ if (cur_data.link_report_flags) {
+ if (test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
+ &cur_data.link_report_flags)) {
+ pr_cont(", receive ");
+ if (test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
+ &cur_data.link_report_flags))
+ pr_cont("& transmit ");
+ } else {
+ pr_cont(", transmit ");
+ }
+ pr_cont("flow control ON");
+ }
+ pr_cont("\n");
+ }
+}
+
+void bnx2x_init_rx_rings(struct bnx2x *bp)
+{
+ int func = BP_FUNC(bp);
+ int max_agg_queues = CHIP_IS_E1(bp) ? ETH_MAX_AGGREGATION_QUEUES_E1 :
+ ETH_MAX_AGGREGATION_QUEUES_E1H_E2;
+ u16 ring_prod;
+ int i, j;
+
+ /* Allocate TPA resources */
+ for_each_rx_queue(bp, j) {
+ struct bnx2x_fastpath *fp = &bp->fp[j];
+
+ DP(NETIF_MSG_IFUP,
+ "mtu %d rx_buf_size %d\n", bp->dev->mtu, fp->rx_buf_size);
+
+ if (!fp->disable_tpa) {
+ /* Fill the per-aggregtion pool */
+ for (i = 0; i < max_agg_queues; i++) {
+ struct bnx2x_agg_info *tpa_info =
+ &fp->tpa_info[i];
+ struct sw_rx_bd *first_buf =
+ &tpa_info->first_buf;
+
+ first_buf->skb = netdev_alloc_skb(bp->dev,
+ fp->rx_buf_size);
+ if (!first_buf->skb) {
+ BNX2X_ERR("Failed to allocate TPA "
+ "skb pool for queue[%d] - "
+ "disabling TPA on this "
+ "queue!\n", j);
+ bnx2x_free_tpa_pool(bp, fp, i);
+ fp->disable_tpa = 1;
+ break;
+ }
+ dma_unmap_addr_set(first_buf, mapping, 0);
+ tpa_info->tpa_state = BNX2X_TPA_STOP;
+ }
+
+ /* "next page" elements initialization */
+ bnx2x_set_next_page_sgl(fp);
+
+ /* set SGEs bit mask */
+ bnx2x_init_sge_ring_bit_mask(fp);
+
+ /* Allocate SGEs and initialize the ring elements */
+ for (i = 0, ring_prod = 0;
+ i < MAX_RX_SGE_CNT*NUM_RX_SGE_PAGES; i++) {
+
+ if (bnx2x_alloc_rx_sge(bp, fp, ring_prod) < 0) {
+ BNX2X_ERR("was only able to allocate "
+ "%d rx sges\n", i);
+ BNX2X_ERR("disabling TPA for "
+ "queue[%d]\n", j);
+ /* Cleanup already allocated elements */
+ bnx2x_free_rx_sge_range(bp, fp,
+ ring_prod);
+ bnx2x_free_tpa_pool(bp, fp,
+ max_agg_queues);
+ fp->disable_tpa = 1;
+ ring_prod = 0;
+ break;
+ }
+ ring_prod = NEXT_SGE_IDX(ring_prod);
+ }
+
+ fp->rx_sge_prod = ring_prod;
+ }
+ }
+
+ for_each_rx_queue(bp, j) {
+ struct bnx2x_fastpath *fp = &bp->fp[j];
+
+ fp->rx_bd_cons = 0;
+
+ /* Activate BD ring */
+ /* Warning!
+ * this will generate an interrupt (to the TSTORM)
+ * must only be done after chip is initialized
+ */
+ bnx2x_update_rx_prod(bp, fp, fp->rx_bd_prod, fp->rx_comp_prod,
+ fp->rx_sge_prod);
+
+ if (j != 0)
+ continue;
+
+ if (CHIP_IS_E1(bp)) {
+ REG_WR(bp, BAR_USTRORM_INTMEM +
+ USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(func),
+ U64_LO(fp->rx_comp_mapping));
+ REG_WR(bp, BAR_USTRORM_INTMEM +
+ USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(func) + 4,
+ U64_HI(fp->rx_comp_mapping));
+ }
+ }
+}
+
+static void bnx2x_free_tx_skbs(struct bnx2x *bp)
+{
+ int i;
+ u8 cos;
+
+ for_each_tx_queue(bp, i) {
+ struct bnx2x_fastpath *fp = &bp->fp[i];
+ for_each_cos_in_tx_queue(fp, cos) {
+ struct bnx2x_fp_txdata *txdata = &fp->txdata[cos];
+
+ u16 bd_cons = txdata->tx_bd_cons;
+ u16 sw_prod = txdata->tx_pkt_prod;
+ u16 sw_cons = txdata->tx_pkt_cons;
+
+ while (sw_cons != sw_prod) {
+ bd_cons = bnx2x_free_tx_pkt(bp, txdata,
+ TX_BD(sw_cons));
+ sw_cons++;
+ }
+ }
+ }
+}
+
+static void bnx2x_free_rx_bds(struct bnx2x_fastpath *fp)
+{
+ struct bnx2x *bp = fp->bp;
+ int i;
+
+ /* ring wasn't allocated */
+ if (fp->rx_buf_ring == NULL)
+ return;
+
+ for (i = 0; i < NUM_RX_BD; i++) {
+ struct sw_rx_bd *rx_buf = &fp->rx_buf_ring[i];
+ struct sk_buff *skb = rx_buf->skb;
+
+ if (skb == NULL)
+ continue;
+ dma_unmap_single(&bp->pdev->dev,
+ dma_unmap_addr(rx_buf, mapping),
+ fp->rx_buf_size, DMA_FROM_DEVICE);
+
+ rx_buf->skb = NULL;
+ dev_kfree_skb(skb);
+ }
+}
+
+static void bnx2x_free_rx_skbs(struct bnx2x *bp)
+{
+ int j;
+
+ for_each_rx_queue(bp, j) {
+ struct bnx2x_fastpath *fp = &bp->fp[j];
+
+ bnx2x_free_rx_bds(fp);
+
+ if (!fp->disable_tpa)
+ bnx2x_free_tpa_pool(bp, fp, CHIP_IS_E1(bp) ?
+ ETH_MAX_AGGREGATION_QUEUES_E1 :
+ ETH_MAX_AGGREGATION_QUEUES_E1H_E2);
+ }
+}
+
+void bnx2x_free_skbs(struct bnx2x *bp)
+{
+ bnx2x_free_tx_skbs(bp);
+ bnx2x_free_rx_skbs(bp);
+}
+
+void bnx2x_update_max_mf_config(struct bnx2x *bp, u32 value)
+{
+ /* load old values */
+ u32 mf_cfg = bp->mf_config[BP_VN(bp)];
+
+ if (value != bnx2x_extract_max_cfg(bp, mf_cfg)) {
+ /* leave all but MAX value */
+ mf_cfg &= ~FUNC_MF_CFG_MAX_BW_MASK;
+
+ /* set new MAX value */
+ mf_cfg |= (value << FUNC_MF_CFG_MAX_BW_SHIFT)
+ & FUNC_MF_CFG_MAX_BW_MASK;
+
+ bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW, mf_cfg);
+ }
+}
+
+/**
+ * bnx2x_free_msix_irqs - free previously requested MSI-X IRQ vectors
+ *
+ * @bp: driver handle
+ * @nvecs: number of vectors to be released
+ */
+static void bnx2x_free_msix_irqs(struct bnx2x *bp, int nvecs)
+{
+ int i, offset = 0;
+
+ if (nvecs == offset)
+ return;
+ free_irq(bp->msix_table[offset].vector, bp->dev);
+ DP(NETIF_MSG_IFDOWN, "released sp irq (%d)\n",
+ bp->msix_table[offset].vector);
+ offset++;
+#ifdef BCM_CNIC
+ if (nvecs == offset)
+ return;
+ offset++;
+#endif
+
+ for_each_eth_queue(bp, i) {
+ if (nvecs == offset)
+ return;
+ DP(NETIF_MSG_IFDOWN, "about to release fp #%d->%d "
+ "irq\n", i, bp->msix_table[offset].vector);
+
+ free_irq(bp->msix_table[offset++].vector, &bp->fp[i]);
+ }
+}
+
+void bnx2x_free_irq(struct bnx2x *bp)
+{
+ if (bp->flags & USING_MSIX_FLAG)
+ bnx2x_free_msix_irqs(bp, BNX2X_NUM_ETH_QUEUES(bp) +
+ CNIC_PRESENT + 1);
+ else if (bp->flags & USING_MSI_FLAG)
+ free_irq(bp->pdev->irq, bp->dev);
+ else
+ free_irq(bp->pdev->irq, bp->dev);
+}
+
+int bnx2x_enable_msix(struct bnx2x *bp)
+{
+ int msix_vec = 0, i, rc, req_cnt;
+
+ bp->msix_table[msix_vec].entry = msix_vec;
+ DP(NETIF_MSG_IFUP, "msix_table[0].entry = %d (slowpath)\n",
+ bp->msix_table[0].entry);
+ msix_vec++;
+
+#ifdef BCM_CNIC
+ bp->msix_table[msix_vec].entry = msix_vec;
+ DP(NETIF_MSG_IFUP, "msix_table[%d].entry = %d (CNIC)\n",
+ bp->msix_table[msix_vec].entry, bp->msix_table[msix_vec].entry);
+ msix_vec++;
+#endif
+ /* We need separate vectors for ETH queues only (not FCoE) */
+ for_each_eth_queue(bp, i) {
+ bp->msix_table[msix_vec].entry = msix_vec;
+ DP(NETIF_MSG_IFUP, "msix_table[%d].entry = %d "
+ "(fastpath #%u)\n", msix_vec, msix_vec, i);
+ msix_vec++;
+ }
+
+ req_cnt = BNX2X_NUM_ETH_QUEUES(bp) + CNIC_PRESENT + 1;
+
+ rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], req_cnt);
+
+ /*
+ * reconfigure number of tx/rx queues according to available
+ * MSI-X vectors
+ */
+ if (rc >= BNX2X_MIN_MSIX_VEC_CNT) {
+ /* how less vectors we will have? */
+ int diff = req_cnt - rc;
+
+ DP(NETIF_MSG_IFUP,
+ "Trying to use less MSI-X vectors: %d\n", rc);
+
+ rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], rc);
+
+ if (rc) {
+ DP(NETIF_MSG_IFUP,
+ "MSI-X is not attainable rc %d\n", rc);
+ return rc;
+ }
+ /*
+ * decrease number of queues by number of unallocated entries
+ */
+ bp->num_queues -= diff;
+
+ DP(NETIF_MSG_IFUP, "New queue configuration set: %d\n",
+ bp->num_queues);
+ } else if (rc) {
+ /* fall to INTx if not enough memory */
+ if (rc == -ENOMEM)
+ bp->flags |= DISABLE_MSI_FLAG;
+ DP(NETIF_MSG_IFUP, "MSI-X is not attainable rc %d\n", rc);
+ return rc;
+ }
+
+ bp->flags |= USING_MSIX_FLAG;
+
+ return 0;
+}
+
+static int bnx2x_req_msix_irqs(struct bnx2x *bp)
+{
+ int i, rc, offset = 0;
+
+ rc = request_irq(bp->msix_table[offset++].vector,
+ bnx2x_msix_sp_int, 0,
+ bp->dev->name, bp->dev);
+ if (rc) {
+ BNX2X_ERR("request sp irq failed\n");
+ return -EBUSY;
+ }
+
+#ifdef BCM_CNIC
+ offset++;
+#endif
+ for_each_eth_queue(bp, i) {
+ struct bnx2x_fastpath *fp = &bp->fp[i];
+ snprintf(fp->name, sizeof(fp->name), "%s-fp-%d",
+ bp->dev->name, i);
+
+ rc = request_irq(bp->msix_table[offset].vector,
+ bnx2x_msix_fp_int, 0, fp->name, fp);
+ if (rc) {
+ BNX2X_ERR("request fp #%d irq (%d) failed rc %d\n", i,
+ bp->msix_table[offset].vector, rc);
+ bnx2x_free_msix_irqs(bp, offset);
+ return -EBUSY;
+ }
+
+ offset++;
+ }
+
+ i = BNX2X_NUM_ETH_QUEUES(bp);
+ offset = 1 + CNIC_PRESENT;
+ netdev_info(bp->dev, "using MSI-X IRQs: sp %d fp[%d] %d"
+ " ... fp[%d] %d\n",
+ bp->msix_table[0].vector,
+ 0, bp->msix_table[offset].vector,
+ i - 1, bp->msix_table[offset + i - 1].vector);
+
+ return 0;
+}
+
+int bnx2x_enable_msi(struct bnx2x *bp)
+{
+ int rc;
+
+ rc = pci_enable_msi(bp->pdev);
+ if (rc) {
+ DP(NETIF_MSG_IFUP, "MSI is not attainable\n");
+ return -1;
+ }
+ bp->flags |= USING_MSI_FLAG;
+
+ return 0;
+}
+
+static int bnx2x_req_irq(struct bnx2x *bp)
+{
+ unsigned long flags;
+ int rc;
+
+ if (bp->flags & USING_MSI_FLAG)
+ flags = 0;
+ else
+ flags = IRQF_SHARED;
+
+ rc = request_irq(bp->pdev->irq, bnx2x_interrupt, flags,
+ bp->dev->name, bp->dev);
+ return rc;
+}
+
+static inline int bnx2x_setup_irqs(struct bnx2x *bp)
+{
+ int rc = 0;
+ if (bp->flags & USING_MSIX_FLAG) {
+ rc = bnx2x_req_msix_irqs(bp);
+ if (rc)
+ return rc;
+ } else {
+ bnx2x_ack_int(bp);
+ rc = bnx2x_req_irq(bp);
+ if (rc) {
+ BNX2X_ERR("IRQ request failed rc %d, aborting\n", rc);
+ return rc;
+ }
+ if (bp->flags & USING_MSI_FLAG) {
+ bp->dev->irq = bp->pdev->irq;
+ netdev_info(bp->dev, "using MSI IRQ %d\n",
+ bp->pdev->irq);
+ }
+ }
+
+ return 0;
+}
+
+static inline void bnx2x_napi_enable(struct bnx2x *bp)
+{
+ int i;
+
+ for_each_rx_queue(bp, i)
+ napi_enable(&bnx2x_fp(bp, i, napi));
+}
+
+static inline void bnx2x_napi_disable(struct bnx2x *bp)
+{
+ int i;
+
+ for_each_rx_queue(bp, i)
+ napi_disable(&bnx2x_fp(bp, i, napi));
+}
+
+void bnx2x_netif_start(struct bnx2x *bp)
+{
+ if (netif_running(bp->dev)) {
+ bnx2x_napi_enable(bp);
+ bnx2x_int_enable(bp);
+ if (bp->state == BNX2X_STATE_OPEN)
+ netif_tx_wake_all_queues(bp->dev);
+ }
+}
+
+void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw)
+{
+ bnx2x_int_disable_sync(bp, disable_hw);
+ bnx2x_napi_disable(bp);
+}
+
+u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+ struct bnx2x *bp = netdev_priv(dev);
+#ifdef BCM_CNIC
+ if (NO_FCOE(bp))
+ return skb_tx_hash(dev, skb);
+ else {
+ struct ethhdr *hdr = (struct ethhdr *)skb->data;
+ u16 ether_type = ntohs(hdr->h_proto);
+
+ /* Skip VLAN tag if present */
+ if (ether_type == ETH_P_8021Q) {
+ struct vlan_ethhdr *vhdr =
+ (struct vlan_ethhdr *)skb->data;
+
+ ether_type = ntohs(vhdr->h_vlan_encapsulated_proto);
+ }
+
+ /* If ethertype is FCoE or FIP - use FCoE ring */
+ if ((ether_type == ETH_P_FCOE) || (ether_type == ETH_P_FIP))
+ return bnx2x_fcoe_tx(bp, txq_index);
+ }
+#endif
+ /* Select a none-FCoE queue: if FCoE is enabled, exclude FCoE L2 ring
+ */
+ return __skb_tx_hash(dev, skb, BNX2X_NUM_ETH_QUEUES(bp));
+}
+
+void bnx2x_set_num_queues(struct bnx2x *bp)
+{
+ switch (bp->multi_mode) {
+ case ETH_RSS_MODE_DISABLED:
+ bp->num_queues = 1;
+ break;
+ case ETH_RSS_MODE_REGULAR:
+ bp->num_queues = bnx2x_calc_num_queues(bp);
+ break;
+
+ default:
+ bp->num_queues = 1;
+ break;
+ }
+
+ /* Add special queues */
+ bp->num_queues += NON_ETH_CONTEXT_USE;
+}
+
+static inline int bnx2x_set_real_num_queues(struct bnx2x *bp)
+{
+ int rc, tx, rx;
+
+ tx = MAX_TXQS_PER_COS * bp->max_cos;
+ rx = BNX2X_NUM_ETH_QUEUES(bp);
+
+/* account for fcoe queue */
+#ifdef BCM_CNIC
+ if (!NO_FCOE(bp)) {
+ rx += FCOE_PRESENT;
+ tx += FCOE_PRESENT;
+ }
+#endif
+
+ rc = netif_set_real_num_tx_queues(bp->dev, tx);
+ if (rc) {
+ BNX2X_ERR("Failed to set real number of Tx queues: %d\n", rc);
+ return rc;
+ }
+ rc = netif_set_real_num_rx_queues(bp->dev, rx);
+ if (rc) {
+ BNX2X_ERR("Failed to set real number of Rx queues: %d\n", rc);
+ return rc;
+ }
+
+ DP(NETIF_MSG_DRV, "Setting real num queues to (tx, rx) (%d, %d)\n",
+ tx, rx);
+
+ return rc;
+}
+
+static inline void bnx2x_set_rx_buf_size(struct bnx2x *bp)
+{
+ int i;
+
+ for_each_queue(bp, i) {
+ struct bnx2x_fastpath *fp = &bp->fp[i];
+
+ /* Always use a mini-jumbo MTU for the FCoE L2 ring */
+ if (IS_FCOE_IDX(i))
+ /*
+ * Although there are no IP frames expected to arrive to
+ * this ring we still want to add an
+ * IP_HEADER_ALIGNMENT_PADDING to prevent a buffer
+ * overrun attack.
+ */
+ fp->rx_buf_size =
+ BNX2X_FCOE_MINI_JUMBO_MTU + ETH_OVREHEAD +
+ BNX2X_FW_RX_ALIGN + IP_HEADER_ALIGNMENT_PADDING;
+ else
+ fp->rx_buf_size =
+ bp->dev->mtu + ETH_OVREHEAD +
+ BNX2X_FW_RX_ALIGN + IP_HEADER_ALIGNMENT_PADDING;
+ }
+}
+
+static inline int bnx2x_init_rss_pf(struct bnx2x *bp)
+{
+ int i;
+ u8 ind_table[T_ETH_INDIRECTION_TABLE_SIZE] = {0};
+ u8 num_eth_queues = BNX2X_NUM_ETH_QUEUES(bp);
+
+ /*
+ * Prepare the inital contents fo the indirection table if RSS is
+ * enabled
+ */
+ if (bp->multi_mode != ETH_RSS_MODE_DISABLED) {
+ for (i = 0; i < sizeof(ind_table); i++)
+ ind_table[i] =
+ bp->fp->cl_id + (i % num_eth_queues);
+ }
+
+ /*
+ * For 57710 and 57711 SEARCHER configuration (rss_keys) is
+ * per-port, so if explicit configuration is needed , do it only
+ * for a PMF.
+ *
+ * For 57712 and newer on the other hand it's a per-function
+ * configuration.
+ */
+ return bnx2x_config_rss_pf(bp, ind_table,
+ bp->port.pmf || !CHIP_IS_E1x(bp));
+}
+
+int bnx2x_config_rss_pf(struct bnx2x *bp, u8 *ind_table, bool config_hash)
+{
+ struct bnx2x_config_rss_params params = {0};
+ int i;
+
+ /* Although RSS is meaningless when there is a single HW queue we
+ * still need it enabled in order to have HW Rx hash generated.
+ *
+ * if (!is_eth_multi(bp))
+ * bp->multi_mode = ETH_RSS_MODE_DISABLED;
+ */
+
+ params.rss_obj = &bp->rss_conf_obj;
+
+ __set_bit(RAMROD_COMP_WAIT, ¶ms.ramrod_flags);
+
+ /* RSS mode */
+ switch (bp->multi_mode) {
+ case ETH_RSS_MODE_DISABLED:
+ __set_bit(BNX2X_RSS_MODE_DISABLED, ¶ms.rss_flags);
+ break;
+ case ETH_RSS_MODE_REGULAR:
+ __set_bit(BNX2X_RSS_MODE_REGULAR, ¶ms.rss_flags);
+ break;
+ case ETH_RSS_MODE_VLAN_PRI:
+ __set_bit(BNX2X_RSS_MODE_VLAN_PRI, ¶ms.rss_flags);
+ break;
+ case ETH_RSS_MODE_E1HOV_PRI:
+ __set_bit(BNX2X_RSS_MODE_E1HOV_PRI, ¶ms.rss_flags);
+ break;
+ case ETH_RSS_MODE_IP_DSCP:
+ __set_bit(BNX2X_RSS_MODE_IP_DSCP, ¶ms.rss_flags);
+ break;
+ default:
+ BNX2X_ERR("Unknown multi_mode: %d\n", bp->multi_mode);
+ return -EINVAL;
+ }
+
+ /* If RSS is enabled */
+ if (bp->multi_mode != ETH_RSS_MODE_DISABLED) {
+ /* RSS configuration */
+ __set_bit(BNX2X_RSS_IPV4, ¶ms.rss_flags);
+ __set_bit(BNX2X_RSS_IPV4_TCP, ¶ms.rss_flags);
+ __set_bit(BNX2X_RSS_IPV6, ¶ms.rss_flags);
+ __set_bit(BNX2X_RSS_IPV6_TCP, ¶ms.rss_flags);
+
+ /* Hash bits */
+ params.rss_result_mask = MULTI_MASK;
+
+ memcpy(params.ind_table, ind_table, sizeof(params.ind_table));
+
+ if (config_hash) {
+ /* RSS keys */
+ for (i = 0; i < sizeof(params.rss_key) / 4; i++)
+ params.rss_key[i] = random32();
+
+ __set_bit(BNX2X_RSS_SET_SRCH, ¶ms.rss_flags);
+ }
+ }
+
+ return bnx2x_config_rss(bp, ¶ms);
+}
+
+static inline int bnx2x_init_hw(struct bnx2x *bp, u32 load_code)
+{
+ struct bnx2x_func_state_params func_params = {0};
+
+ /* Prepare parameters for function state transitions */
+ __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
+
+ func_params.f_obj = &bp->func_obj;
+ func_params.cmd = BNX2X_F_CMD_HW_INIT;
+
+ func_params.params.hw_init.load_phase = load_code;
+
+ return bnx2x_func_state_change(bp, &func_params);
+}
+
+/*
+ * Cleans the object that have internal lists without sending
+ * ramrods. Should be run when interrutps are disabled.
+ */
+static void bnx2x_squeeze_objects(struct bnx2x *bp)
+{
+ int rc;
+ unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
+ struct bnx2x_mcast_ramrod_params rparam = {0};
+ struct bnx2x_vlan_mac_obj *mac_obj = &bp->fp->mac_obj;
+
+ /***************** Cleanup MACs' object first *************************/
+
+ /* Wait for completion of requested */
+ __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+ /* Perform a dry cleanup */
+ __set_bit(RAMROD_DRV_CLR_ONLY, &ramrod_flags);
+
+ /* Clean ETH primary MAC */
+ __set_bit(BNX2X_ETH_MAC, &vlan_mac_flags);
+ rc = mac_obj->delete_all(bp, &bp->fp->mac_obj, &vlan_mac_flags,
+ &ramrod_flags);
+ if (rc != 0)
+ BNX2X_ERR("Failed to clean ETH MACs: %d\n", rc);
+
+ /* Cleanup UC list */
+ vlan_mac_flags = 0;
+ __set_bit(BNX2X_UC_LIST_MAC, &vlan_mac_flags);
+ rc = mac_obj->delete_all(bp, mac_obj, &vlan_mac_flags,
+ &ramrod_flags);
+ if (rc != 0)
+ BNX2X_ERR("Failed to clean UC list MACs: %d\n", rc);
+
+ /***************** Now clean mcast object *****************************/
+ rparam.mcast_obj = &bp->mcast_obj;
+ __set_bit(RAMROD_DRV_CLR_ONLY, &rparam.ramrod_flags);
+
+ /* Add a DEL command... */
+ rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL);
+ if (rc < 0)
+ BNX2X_ERR("Failed to add a new DEL command to a multi-cast "
+ "object: %d\n", rc);
+
+ /* ...and wait until all pending commands are cleared */
+ rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT);
+ while (rc != 0) {
+ if (rc < 0) {
+ BNX2X_ERR("Failed to clean multi-cast object: %d\n",
+ rc);
+ return;
+ }
+
+ rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT);
+ }
+}
+
+#ifndef BNX2X_STOP_ON_ERROR
+#define LOAD_ERROR_EXIT(bp, label) \
+ do { \
+ (bp)->state = BNX2X_STATE_ERROR; \
+ goto label; \
+ } while (0)
+#else
+#define LOAD_ERROR_EXIT(bp, label) \
+ do { \
+ (bp)->state = BNX2X_STATE_ERROR; \
+ (bp)->panic = 1; \
+ return -EBUSY; \
+ } while (0)
+#endif
+
+/* must be called with rtnl_lock */
+int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
+{
+ int port = BP_PORT(bp);
+ u32 load_code;
+ int i, rc;
+
+#ifdef BNX2X_STOP_ON_ERROR
+ if (unlikely(bp->panic))
+ return -EPERM;
+#endif
+
+ bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
+
+ /* Set the initial link reported state to link down */
+ bnx2x_acquire_phy_lock(bp);
+ memset(&bp->last_reported_link, 0, sizeof(bp->last_reported_link));
+ __set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+ &bp->last_reported_link.link_report_flags);
+ bnx2x_release_phy_lock(bp);
+
+ /* must be called before memory allocation and HW init */
+ bnx2x_ilt_set_info(bp);
+
+ /*
+ * Zero fastpath structures preserving invariants like napi, which are
+ * allocated only once, fp index, max_cos, bp pointer.
+ * Also set fp->disable_tpa.
+ */
+ for_each_queue(bp, i)
+ bnx2x_bz_fp(bp, i);
+
+
+ /* Set the receive queues buffer size */
+ bnx2x_set_rx_buf_size(bp);
+
+ if (bnx2x_alloc_mem(bp))
+ return -ENOMEM;
+
+ /* As long as bnx2x_alloc_mem() may possibly update
+ * bp->num_queues, bnx2x_set_real_num_queues() should always
+ * come after it.
+ */
+ rc = bnx2x_set_real_num_queues(bp);
+ if (rc) {
+ BNX2X_ERR("Unable to set real_num_queues\n");
+ LOAD_ERROR_EXIT(bp, load_error0);
+ }
+
+ /* configure multi cos mappings in kernel.
+ * this configuration may be overriden by a multi class queue discipline
+ * or by a dcbx negotiation result.
+ */
+ bnx2x_setup_tc(bp->dev, bp->max_cos);
+
+ bnx2x_napi_enable(bp);
+
+ /* Send LOAD_REQUEST command to MCP
+ * Returns the type of LOAD command:
+ * if it is the first port to be initialized
+ * common blocks should be initialized, otherwise - not
+ */
+ if (!BP_NOMCP(bp)) {
+ load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ, 0);
+ if (!load_code) {
+ BNX2X_ERR("MCP response failure, aborting\n");
+ rc = -EBUSY;
+ LOAD_ERROR_EXIT(bp, load_error1);
+ }
+ if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) {
+ rc = -EBUSY; /* other port in diagnostic mode */
+ LOAD_ERROR_EXIT(bp, load_error1);
+ }
+
+ } else {
+ int path = BP_PATH(bp);
+
+ DP(NETIF_MSG_IFUP, "NO MCP - load counts[%d] %d, %d, %d\n",
+ path, load_count[path][0], load_count[path][1],
+ load_count[path][2]);
+ load_count[path][0]++;
+ load_count[path][1 + port]++;
+ DP(NETIF_MSG_IFUP, "NO MCP - new load counts[%d] %d, %d, %d\n",
+ path, load_count[path][0], load_count[path][1],
+ load_count[path][2]);
+ if (load_count[path][0] == 1)
+ load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
+ else if (load_count[path][1 + port] == 1)
+ load_code = FW_MSG_CODE_DRV_LOAD_PORT;
+ else
+ load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION;
+ }
+
+ if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
+ (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) ||
+ (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) {
+ bp->port.pmf = 1;
+ /*
+ * We need the barrier to ensure the ordering between the
+ * writing to bp->port.pmf here and reading it from the
+ * bnx2x_periodic_task().
+ */
+ smp_mb();
+ queue_delayed_work(bnx2x_wq, &bp->period_task, 0);
+ } else
+ bp->port.pmf = 0;
+
+ DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
+
+ /* Init Function state controlling object */
+ bnx2x__init_func_obj(bp);
+
+ /* Initialize HW */
+ rc = bnx2x_init_hw(bp, load_code);
+ if (rc) {
+ BNX2X_ERR("HW init failed, aborting\n");
+ bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
+ LOAD_ERROR_EXIT(bp, load_error2);
+ }
+
+ /* Connect to IRQs */
+ rc = bnx2x_setup_irqs(bp);
+ if (rc) {
+ bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
+ LOAD_ERROR_EXIT(bp, load_error2);
+ }
+
+ /* Setup NIC internals and enable interrupts */
+ bnx2x_nic_init(bp, load_code);
+
+ /* Init per-function objects */
+ bnx2x_init_bp_objs(bp);
+
+ if (((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
+ (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP)) &&
+ (bp->common.shmem2_base)) {
+ if (SHMEM2_HAS(bp, dcc_support))
+ SHMEM2_WR(bp, dcc_support,
+ (SHMEM_DCC_SUPPORT_DISABLE_ENABLE_PF_TLV |
+ SHMEM_DCC_SUPPORT_BANDWIDTH_ALLOCATION_TLV));
+ }
+
+ bp->state = BNX2X_STATE_OPENING_WAIT4_PORT;
+ rc = bnx2x_func_start(bp);
+ if (rc) {
+ BNX2X_ERR("Function start failed!\n");
+ bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
+ LOAD_ERROR_EXIT(bp, load_error3);
+ }
+
+ /* Send LOAD_DONE command to MCP */
+ if (!BP_NOMCP(bp)) {
+ load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
+ if (!load_code) {
+ BNX2X_ERR("MCP response failure, aborting\n");
+ rc = -EBUSY;
+ LOAD_ERROR_EXIT(bp, load_error3);
+ }
+ }
+
+ rc = bnx2x_setup_leading(bp);
+ if (rc) {
+ BNX2X_ERR("Setup leading failed!\n");
+ LOAD_ERROR_EXIT(bp, load_error3);
+ }
+
+#ifdef BCM_CNIC
+ /* Enable Timer scan */
+ REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 1);
+#endif
+
+ for_each_nondefault_queue(bp, i) {
+ rc = bnx2x_setup_queue(bp, &bp->fp[i], 0);
+ if (rc)
+ LOAD_ERROR_EXIT(bp, load_error4);
+ }
+
+ rc = bnx2x_init_rss_pf(bp);
+ if (rc)
+ LOAD_ERROR_EXIT(bp, load_error4);
+
+ /* Now when Clients are configured we are ready to work */
+ bp->state = BNX2X_STATE_OPEN;
+
+ /* Configure a ucast MAC */
+ rc = bnx2x_set_eth_mac(bp, true);
+ if (rc)
+ LOAD_ERROR_EXIT(bp, load_error4);
+
+ if (bp->pending_max) {
+ bnx2x_update_max_mf_config(bp, bp->pending_max);
+ bp->pending_max = 0;
+ }
+
+ if (bp->port.pmf)
+ bnx2x_initial_phy_init(bp, load_mode);
+
+ /* Start fast path */
+
+ /* Initialize Rx filter. */
+ netif_addr_lock_bh(bp->dev);
+ bnx2x_set_rx_mode(bp->dev);
+ netif_addr_unlock_bh(bp->dev);
+
+ /* Start the Tx */
+ switch (load_mode) {
+ case LOAD_NORMAL:
+ /* Tx queue should be only reenabled */
+ netif_tx_wake_all_queues(bp->dev);
+ break;
+
+ case LOAD_OPEN:
+ netif_tx_start_all_queues(bp->dev);
+ smp_mb__after_clear_bit();
+ break;
+
+ case LOAD_DIAG:
+ bp->state = BNX2X_STATE_DIAG;
+ break;
+
+ default:
+ break;
+ }
+
+ if (!bp->port.pmf)
+ bnx2x__link_status_update(bp);
+
+ /* start the timer */
+ mod_timer(&bp->timer, jiffies + bp->current_interval);
+
+#ifdef BCM_CNIC
+ bnx2x_setup_cnic_irq_info(bp);
+ if (bp->state == BNX2X_STATE_OPEN)
+ bnx2x_cnic_notify(bp, CNIC_CTL_START_CMD);
+#endif
+ bnx2x_inc_load_cnt(bp);
+
+ /* Wait for all pending SP commands to complete */
+ if (!bnx2x_wait_sp_comp(bp, ~0x0UL)) {
+ BNX2X_ERR("Timeout waiting for SP elements to complete\n");
+ bnx2x_nic_unload(bp, UNLOAD_CLOSE);
+ return -EBUSY;
+ }
+
+ bnx2x_dcbx_init(bp);
+ return 0;
+
+#ifndef BNX2X_STOP_ON_ERROR
+load_error4:
+#ifdef BCM_CNIC
+ /* Disable Timer scan */
+ REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 0);
+#endif
+load_error3:
+ bnx2x_int_disable_sync(bp, 1);
+
+ /* Clean queueable objects */
+ bnx2x_squeeze_objects(bp);
+
+ /* Free SKBs, SGEs, TPA pool and driver internals */
+ bnx2x_free_skbs(bp);
+ for_each_rx_queue(bp, i)
+ bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
+
+ /* Release IRQs */
+ bnx2x_free_irq(bp);
+load_error2:
+ if (!BP_NOMCP(bp)) {
+ bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
+ bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
+ }
+
+ bp->port.pmf = 0;
+load_error1:
+ bnx2x_napi_disable(bp);
+load_error0:
+ bnx2x_free_mem(bp);
+
+ return rc;
+#endif /* ! BNX2X_STOP_ON_ERROR */
+}
+
+/* must be called with rtnl_lock */
+int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
+{
+ int i;
+ bool global = false;
+
+ if ((bp->state == BNX2X_STATE_CLOSED) ||
+ (bp->state == BNX2X_STATE_ERROR)) {
+ /* We can get here if the driver has been unloaded
+ * during parity error recovery and is either waiting for a
+ * leader to complete or for other functions to unload and
+ * then ifdown has been issued. In this case we want to
+ * unload and let other functions to complete a recovery
+ * process.
+ */
+ bp->recovery_state = BNX2X_RECOVERY_DONE;
+ bp->is_leader = 0;
+ bnx2x_release_leader_lock(bp);
+ smp_mb();
+
+ DP(NETIF_MSG_HW, "Releasing a leadership...\n");
+
+ return -EINVAL;
+ }
+
+ /*
+ * It's important to set the bp->state to the value different from
+ * BNX2X_STATE_OPEN and only then stop the Tx. Otherwise bnx2x_tx_int()
+ * may restart the Tx from the NAPI context (see bnx2x_tx_int()).
+ */
+ bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
+ smp_mb();
+
+ /* Stop Tx */
+ bnx2x_tx_disable(bp);
+
+#ifdef BCM_CNIC
+ bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD);
+#endif
+
+ bp->rx_mode = BNX2X_RX_MODE_NONE;
+
+ del_timer_sync(&bp->timer);
+
+ /* Set ALWAYS_ALIVE bit in shmem */
+ bp->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE;
+
+ bnx2x_drv_pulse(bp);
+
+ bnx2x_stats_handle(bp, STATS_EVENT_STOP);
+
+ /* Cleanup the chip if needed */
+ if (unload_mode != UNLOAD_RECOVERY)
+ bnx2x_chip_cleanup(bp, unload_mode);
+ else {
+ /* Send the UNLOAD_REQUEST to the MCP */
+ bnx2x_send_unload_req(bp, unload_mode);
+
+ /*
+ * Prevent transactions to host from the functions on the
+ * engine that doesn't reset global blocks in case of global
+ * attention once gloabl blocks are reset and gates are opened
+ * (the engine which leader will perform the recovery
+ * last).
+ */
+ if (!CHIP_IS_E1x(bp))
+ bnx2x_pf_disable(bp);
+
+ /* Disable HW interrupts, NAPI */
+ bnx2x_netif_stop(bp, 1);
+
+ /* Release IRQs */
+ bnx2x_free_irq(bp);
+
+ /* Report UNLOAD_DONE to MCP */
+ bnx2x_send_unload_done(bp);
+ }
+
+ /*
+ * At this stage no more interrupts will arrive so we may safly clean
+ * the queueable objects here in case they failed to get cleaned so far.
+ */
+ bnx2x_squeeze_objects(bp);
+
+ /* There should be no more pending SP commands at this stage */
+ bp->sp_state = 0;
+
+ bp->port.pmf = 0;
+
+ /* Free SKBs, SGEs, TPA pool and driver internals */
+ bnx2x_free_skbs(bp);
+ for_each_rx_queue(bp, i)
+ bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
+
+ bnx2x_free_mem(bp);
+
+ bp->state = BNX2X_STATE_CLOSED;
+
+ /* Check if there are pending parity attentions. If there are - set
+ * RECOVERY_IN_PROGRESS.
+ */
+ if (bnx2x_chk_parity_attn(bp, &global, false)) {
+ bnx2x_set_reset_in_progress(bp);
+
+ /* Set RESET_IS_GLOBAL if needed */
+ if (global)
+ bnx2x_set_reset_global(bp);
+ }
+
+
+ /* The last driver must disable a "close the gate" if there is no
+ * parity attention or "process kill" pending.
+ */
+ if (!bnx2x_dec_load_cnt(bp) && bnx2x_reset_is_done(bp, BP_PATH(bp)))
+ bnx2x_disable_close_the_gate(bp);
+
+ return 0;
+}
+
+int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state)
+{
+ u16 pmcsr;
+
+ /* If there is no power capability, silently succeed */
+ if (!bp->pm_cap) {
+ DP(NETIF_MSG_HW, "No power capability. Breaking.\n");
+ return 0;
+ }
+
+ pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, &pmcsr);
+
+ switch (state) {
+ case PCI_D0:
+ pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL,
+ ((pmcsr & ~PCI_PM_CTRL_STATE_MASK) |
+ PCI_PM_CTRL_PME_STATUS));
+
+ if (pmcsr & PCI_PM_CTRL_STATE_MASK)
+ /* delay required during transition out of D3hot */
+ msleep(20);
+ break;
+
+ case PCI_D3hot:
+ /* If there are other clients above don't
+ shut down the power */
+ if (atomic_read(&bp->pdev->enable_cnt) != 1)
+ return 0;
+ /* Don't shut down the power for emulation and FPGA */
+ if (CHIP_REV_IS_SLOW(bp))
+ return 0;
+
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ pmcsr |= 3;
+
+ if (bp->wol)
+ pmcsr |= PCI_PM_CTRL_PME_ENABLE;
+
+ pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL,
+ pmcsr);
+
+ /* No more memory access after this point until
+ * device is brought back to D0.
+ */
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/*
+ * net_device service functions
+ */
+int bnx2x_poll(struct napi_struct *napi, int budget)
+{
+ int work_done = 0;
+ u8 cos;
+ struct bnx2x_fastpath *fp = container_of(napi, struct bnx2x_fastpath,
+ napi);
+ struct bnx2x *bp = fp->bp;
+
+ while (1) {
+#ifdef BNX2X_STOP_ON_ERROR
+ if (unlikely(bp->panic)) {
+ napi_complete(napi);
+ return 0;
+ }
+#endif
+
+ for_each_cos_in_tx_queue(fp, cos)
+ if (bnx2x_tx_queue_has_work(&fp->txdata[cos]))
+ bnx2x_tx_int(bp, &fp->txdata[cos]);
+
+
+ if (bnx2x_has_rx_work(fp)) {
+ work_done += bnx2x_rx_int(fp, budget - work_done);
+
+ /* must not complete if we consumed full budget */
+ if (work_done >= budget)
+ break;
+ }
+
+ /* Fall out from the NAPI loop if needed */
+ if (!(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) {
+#ifdef BCM_CNIC
+ /* No need to update SB for FCoE L2 ring as long as
+ * it's connected to the default SB and the SB
+ * has been updated when NAPI was scheduled.
+ */
+ if (IS_FCOE_FP(fp)) {
+ napi_complete(napi);
+ break;
+ }
+#endif
+
+ bnx2x_update_fpsb_idx(fp);
+ /* bnx2x_has_rx_work() reads the status block,
+ * thus we need to ensure that status block indices
+ * have been actually read (bnx2x_update_fpsb_idx)
+ * prior to this check (bnx2x_has_rx_work) so that
+ * we won't write the "newer" value of the status block
+ * to IGU (if there was a DMA right after
+ * bnx2x_has_rx_work and if there is no rmb, the memory
+ * reading (bnx2x_update_fpsb_idx) may be postponed
+ * to right before bnx2x_ack_sb). In this case there
+ * will never be another interrupt until there is
+ * another update of the status block, while there
+ * is still unhandled work.
+ */
+ rmb();
+
+ if (!(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) {
+ napi_complete(napi);
+ /* Re-enable interrupts */
+ DP(NETIF_MSG_HW,
+ "Update index to %d\n", fp->fp_hc_idx);
+ bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID,
+ le16_to_cpu(fp->fp_hc_idx),
+ IGU_INT_ENABLE, 1);
+ break;
+ }
+ }
+ }
+
+ return work_done;
+}
+
+/* we split the first BD into headers and data BDs
+ * to ease the pain of our fellow microcode engineers
+ * we use one mapping for both BDs
+ * So far this has only been observed to happen
+ * in Other Operating Systems(TM)
+ */
+static noinline u16 bnx2x_tx_split(struct bnx2x *bp,
+ struct bnx2x_fp_txdata *txdata,
+ struct sw_tx_bd *tx_buf,
+ struct eth_tx_start_bd **tx_bd, u16 hlen,
+ u16 bd_prod, int nbd)
+{
+ struct eth_tx_start_bd *h_tx_bd = *tx_bd;
+ struct eth_tx_bd *d_tx_bd;
+ dma_addr_t mapping;
+ int old_len = le16_to_cpu(h_tx_bd->nbytes);
+
+ /* first fix first BD */
+ h_tx_bd->nbd = cpu_to_le16(nbd);
+ h_tx_bd->nbytes = cpu_to_le16(hlen);
+
+ DP(NETIF_MSG_TX_QUEUED, "TSO split header size is %d "
+ "(%x:%x) nbd %d\n", h_tx_bd->nbytes, h_tx_bd->addr_hi,
+ h_tx_bd->addr_lo, h_tx_bd->nbd);
+
+ /* now get a new data BD
+ * (after the pbd) and fill it */
+ bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
+ d_tx_bd = &txdata->tx_desc_ring[bd_prod].reg_bd;
+
+ mapping = HILO_U64(le32_to_cpu(h_tx_bd->addr_hi),
+ le32_to_cpu(h_tx_bd->addr_lo)) + hlen;
+
+ d_tx_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
+ d_tx_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
+ d_tx_bd->nbytes = cpu_to_le16(old_len - hlen);
+
+ /* this marks the BD as one that has no individual mapping */
+ tx_buf->flags |= BNX2X_TSO_SPLIT_BD;
+
+ DP(NETIF_MSG_TX_QUEUED,
+ "TSO split data size is %d (%x:%x)\n",
+ d_tx_bd->nbytes, d_tx_bd->addr_hi, d_tx_bd->addr_lo);
+
+ /* update tx_bd */
+ *tx_bd = (struct eth_tx_start_bd *)d_tx_bd;
+
+ return bd_prod;
+}
+
+static inline u16 bnx2x_csum_fix(unsigned char *t_header, u16 csum, s8 fix)
+{
+ if (fix > 0)
+ csum = (u16) ~csum_fold(csum_sub(csum,
+ csum_partial(t_header - fix, fix, 0)));
+
+ else if (fix < 0)
+ csum = (u16) ~csum_fold(csum_add(csum,
+ csum_partial(t_header, -fix, 0)));
+
+ return swab16(csum);
+}
+
+static inline u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb)
+{
+ u32 rc;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
+ rc = XMIT_PLAIN;
+
+ else {
+ if (vlan_get_protocol(skb) == htons(ETH_P_IPV6)) {
+ rc = XMIT_CSUM_V6;
+ if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+ rc |= XMIT_CSUM_TCP;
+
+ } else {
+ rc = XMIT_CSUM_V4;
+ if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+ rc |= XMIT_CSUM_TCP;
+ }
+ }
+
+ if (skb_is_gso_v6(skb))
+ rc |= XMIT_GSO_V6 | XMIT_CSUM_TCP | XMIT_CSUM_V6;
+ else if (skb_is_gso(skb))
+ rc |= XMIT_GSO_V4 | XMIT_CSUM_V4 | XMIT_CSUM_TCP;
+
+ return rc;
+}
+
+#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3)
+/* check if packet requires linearization (packet is too fragmented)
+ no need to check fragmentation if page size > 8K (there will be no
+ violation to FW restrictions) */
+static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb,
+ u32 xmit_type)
+{
+ int to_copy = 0;
+ int hlen = 0;
+ int first_bd_sz = 0;
+
+ /* 3 = 1 (for linear data BD) + 2 (for PBD and last BD) */
+ if (skb_shinfo(skb)->nr_frags >= (MAX_FETCH_BD - 3)) {
+
+ if (xmit_type & XMIT_GSO) {
+ unsigned short lso_mss = skb_shinfo(skb)->gso_size;
+ /* Check if LSO packet needs to be copied:
+ 3 = 1 (for headers BD) + 2 (for PBD and last BD) */
+ int wnd_size = MAX_FETCH_BD - 3;
+ /* Number of windows to check */
+ int num_wnds = skb_shinfo(skb)->nr_frags - wnd_size;
+ int wnd_idx = 0;
+ int frag_idx = 0;
+ u32 wnd_sum = 0;
+
+ /* Headers length */
+ hlen = (int)(skb_transport_header(skb) - skb->data) +
+ tcp_hdrlen(skb);
+
+ /* Amount of data (w/o headers) on linear part of SKB*/
+ first_bd_sz = skb_headlen(skb) - hlen;
+
+ wnd_sum = first_bd_sz;
+
+ /* Calculate the first sum - it's special */
+ for (frag_idx = 0; frag_idx < wnd_size - 1; frag_idx++)
+ wnd_sum +=
+ skb_shinfo(skb)->frags[frag_idx].size;
+
+ /* If there was data on linear skb data - check it */
+ if (first_bd_sz > 0) {
+ if (unlikely(wnd_sum < lso_mss)) {
+ to_copy = 1;
+ goto exit_lbl;
+ }
+
+ wnd_sum -= first_bd_sz;
+ }
+
+ /* Others are easier: run through the frag list and
+ check all windows */
+ for (wnd_idx = 0; wnd_idx <= num_wnds; wnd_idx++) {
+ wnd_sum +=
+ skb_shinfo(skb)->frags[wnd_idx + wnd_size - 1].size;
+
+ if (unlikely(wnd_sum < lso_mss)) {
+ to_copy = 1;
+ break;
+ }
+ wnd_sum -=
+ skb_shinfo(skb)->frags[wnd_idx].size;
+ }
+ } else {
+ /* in non-LSO too fragmented packet should always
+ be linearized */
+ to_copy = 1;
+ }
+ }
+
+exit_lbl:
+ if (unlikely(to_copy))
+ DP(NETIF_MSG_TX_QUEUED,
+ "Linearization IS REQUIRED for %s packet. "
+ "num_frags %d hlen %d first_bd_sz %d\n",
+ (xmit_type & XMIT_GSO) ? "LSO" : "non-LSO",
+ skb_shinfo(skb)->nr_frags, hlen, first_bd_sz);
+
+ return to_copy;
+}
+#endif
+
+static inline void bnx2x_set_pbd_gso_e2(struct sk_buff *skb, u32 *parsing_data,
+ u32 xmit_type)
+{
+ *parsing_data |= (skb_shinfo(skb)->gso_size <<
+ ETH_TX_PARSE_BD_E2_LSO_MSS_SHIFT) &
+ ETH_TX_PARSE_BD_E2_LSO_MSS;
+ if ((xmit_type & XMIT_GSO_V6) &&
+ (ipv6_hdr(skb)->nexthdr == NEXTHDR_IPV6))
+ *parsing_data |= ETH_TX_PARSE_BD_E2_IPV6_WITH_EXT_HDR;
+}
+
+/**
+ * bnx2x_set_pbd_gso - update PBD in GSO case.
+ *
+ * @skb: packet skb
+ * @pbd: parse BD
+ * @xmit_type: xmit flags
+ */
+static inline void bnx2x_set_pbd_gso(struct sk_buff *skb,
+ struct eth_tx_parse_bd_e1x *pbd,
+ u32 xmit_type)
+{
+ pbd->lso_mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
+ pbd->tcp_send_seq = swab32(tcp_hdr(skb)->seq);
+ pbd->tcp_flags = pbd_tcp_flags(skb);
+
+ if (xmit_type & XMIT_GSO_V4) {
+ pbd->ip_id = swab16(ip_hdr(skb)->id);
+ pbd->tcp_pseudo_csum =
+ swab16(~csum_tcpudp_magic(ip_hdr(skb)->saddr,
+ ip_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0));
+
+ } else
+ pbd->tcp_pseudo_csum =
+ swab16(~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0));
+
+ pbd->global_data |= ETH_TX_PARSE_BD_E1X_PSEUDO_CS_WITHOUT_LEN;
+}
+
+/**
+ * bnx2x_set_pbd_csum_e2 - update PBD with checksum and return header length
+ *
+ * @bp: driver handle
+ * @skb: packet skb
+ * @parsing_data: data to be updated
+ * @xmit_type: xmit flags
+ *
+ * 57712 related
+ */
+static inline u8 bnx2x_set_pbd_csum_e2(struct bnx2x *bp, struct sk_buff *skb,
+ u32 *parsing_data, u32 xmit_type)
+{
+ *parsing_data |=
+ ((((u8 *)skb_transport_header(skb) - skb->data) >> 1) <<
+ ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT) &
+ ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W;
+
+ if (xmit_type & XMIT_CSUM_TCP) {
+ *parsing_data |= ((tcp_hdrlen(skb) / 4) <<
+ ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT) &
+ ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW;
+
+ return skb_transport_header(skb) + tcp_hdrlen(skb) - skb->data;
+ } else
+ /* We support checksum offload for TCP and UDP only.
+ * No need to pass the UDP header length - it's a constant.
+ */
+ return skb_transport_header(skb) +
+ sizeof(struct udphdr) - skb->data;
+}
+
+static inline void bnx2x_set_sbd_csum(struct bnx2x *bp, struct sk_buff *skb,
+ struct eth_tx_start_bd *tx_start_bd, u32 xmit_type)
+{
+ tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_L4_CSUM;
+
+ if (xmit_type & XMIT_CSUM_V4)
+ tx_start_bd->bd_flags.as_bitfield |=
+ ETH_TX_BD_FLAGS_IP_CSUM;
+ else
+ tx_start_bd->bd_flags.as_bitfield |=
+ ETH_TX_BD_FLAGS_IPV6;
+
+ if (!(xmit_type & XMIT_CSUM_TCP))
+ tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_IS_UDP;
+}
+
+/**
+ * bnx2x_set_pbd_csum - update PBD with checksum and return header length
+ *
+ * @bp: driver handle
+ * @skb: packet skb
+ * @pbd: parse BD to be updated
+ * @xmit_type: xmit flags
+ */
+static inline u8 bnx2x_set_pbd_csum(struct bnx2x *bp, struct sk_buff *skb,
+ struct eth_tx_parse_bd_e1x *pbd,
+ u32 xmit_type)
+{
+ u8 hlen = (skb_network_header(skb) - skb->data) >> 1;
+
+ /* for now NS flag is not used in Linux */
+ pbd->global_data =
+ (hlen | ((skb->protocol == cpu_to_be16(ETH_P_8021Q)) <<
+ ETH_TX_PARSE_BD_E1X_LLC_SNAP_EN_SHIFT));
+
+ pbd->ip_hlen_w = (skb_transport_header(skb) -
+ skb_network_header(skb)) >> 1;
+
+ hlen += pbd->ip_hlen_w;
+
+ /* We support checksum offload for TCP and UDP only */
+ if (xmit_type & XMIT_CSUM_TCP)
+ hlen += tcp_hdrlen(skb) / 2;
+ else
+ hlen += sizeof(struct udphdr) / 2;
+
+ pbd->total_hlen_w = cpu_to_le16(hlen);
+ hlen = hlen*2;
+
+ if (xmit_type & XMIT_CSUM_TCP) {
+ pbd->tcp_pseudo_csum = swab16(tcp_hdr(skb)->check);
+
+ } else {
+ s8 fix = SKB_CS_OFF(skb); /* signed! */
+
+ DP(NETIF_MSG_TX_QUEUED,
+ "hlen %d fix %d csum before fix %x\n",
+ le16_to_cpu(pbd->total_hlen_w), fix, SKB_CS(skb));
+
+ /* HW bug: fixup the CSUM */
+ pbd->tcp_pseudo_csum =
+ bnx2x_csum_fix(skb_transport_header(skb),
+ SKB_CS(skb), fix);
+
+ DP(NETIF_MSG_TX_QUEUED, "csum after fix %x\n",
+ pbd->tcp_pseudo_csum);
+ }
+
+ return hlen;
+}
+
+/* called with netif_tx_lock
+ * bnx2x_tx_int() runs without netif_tx_lock unless it needs to call
+ * netif_wake_queue()
+ */
+netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct bnx2x *bp = netdev_priv(dev);
+
+ struct bnx2x_fastpath *fp;
+ struct netdev_queue *txq;
+ struct bnx2x_fp_txdata *txdata;
+ struct sw_tx_bd *tx_buf;
+ struct eth_tx_start_bd *tx_start_bd, *first_bd;
+ struct eth_tx_bd *tx_data_bd, *total_pkt_bd = NULL;
+ struct eth_tx_parse_bd_e1x *pbd_e1x = NULL;
+ struct eth_tx_parse_bd_e2 *pbd_e2 = NULL;
+ u32 pbd_e2_parsing_data = 0;
+ u16 pkt_prod, bd_prod;
+ int nbd, txq_index, fp_index, txdata_index;
+ dma_addr_t mapping;
+ u32 xmit_type = bnx2x_xmit_type(bp, skb);
+ int i;
+ u8 hlen = 0;
+ __le16 pkt_size = 0;
+ struct ethhdr *eth;
+ u8 mac_type = UNICAST_ADDRESS;
+
+#ifdef BNX2X_STOP_ON_ERROR
+ if (unlikely(bp->panic))
+ return NETDEV_TX_BUSY;
+#endif
+
+ txq_index = skb_get_queue_mapping(skb);
+ txq = netdev_get_tx_queue(dev, txq_index);
+
+ BUG_ON(txq_index >= MAX_ETH_TXQ_IDX(bp) + FCOE_PRESENT);
+
+ /* decode the fastpath index and the cos index from the txq */
+ fp_index = TXQ_TO_FP(txq_index);
+ txdata_index = TXQ_TO_COS(txq_index);
+
+#ifdef BCM_CNIC
+ /*
+ * Override the above for the FCoE queue:
+ * - FCoE fp entry is right after the ETH entries.
+ * - FCoE L2 queue uses bp->txdata[0] only.
+ */
+ if (unlikely(!NO_FCOE(bp) && (txq_index ==
+ bnx2x_fcoe_tx(bp, txq_index)))) {
+ fp_index = FCOE_IDX;
+ txdata_index = 0;
+ }
+#endif
+
+ /* enable this debug print to view the transmission queue being used
+ DP(BNX2X_MSG_FP, "indices: txq %d, fp %d, txdata %d",
+ txq_index, fp_index, txdata_index); */
+
+ /* locate the fastpath and the txdata */
+ fp = &bp->fp[fp_index];
+ txdata = &fp->txdata[txdata_index];
+
+ /* enable this debug print to view the tranmission details
+ DP(BNX2X_MSG_FP,"transmitting packet cid %d fp index %d txdata_index %d"
+ " tx_data ptr %p fp pointer %p",
+ txdata->cid, fp_index, txdata_index, txdata, fp); */
+
+ if (unlikely(bnx2x_tx_avail(bp, txdata) <
+ (skb_shinfo(skb)->nr_frags + 3))) {
+ fp->eth_q_stats.driver_xoff++;
+ netif_tx_stop_queue(txq);
+ BNX2X_ERR("BUG! Tx ring full when queue awake!\n");
+ return NETDEV_TX_BUSY;
+ }
+
+ DP(NETIF_MSG_TX_QUEUED, "queue[%d]: SKB: summed %x protocol %x "
+ "protocol(%x,%x) gso type %x xmit_type %x\n",
+ txq_index, skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr,
+ ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type);
+
+ eth = (struct ethhdr *)skb->data;
+
+ /* set flag according to packet type (UNICAST_ADDRESS is default)*/
+ if (unlikely(is_multicast_ether_addr(eth->h_dest))) {
+ if (is_broadcast_ether_addr(eth->h_dest))
+ mac_type = BROADCAST_ADDRESS;
+ else
+ mac_type = MULTICAST_ADDRESS;
+ }
+
+#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3)
+ /* First, check if we need to linearize the skb (due to FW
+ restrictions). No need to check fragmentation if page size > 8K
+ (there will be no violation to FW restrictions) */
+ if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) {
+ /* Statistics of linearization */
+ bp->lin_cnt++;
+ if (skb_linearize(skb) != 0) {
+ DP(NETIF_MSG_TX_QUEUED, "SKB linearization failed - "
+ "silently dropping this SKB\n");
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+ }
+#endif
+ /* Map skb linear data for DMA */
+ mapping = dma_map_single(&bp->pdev->dev, skb->data,
+ skb_headlen(skb), DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
+ DP(NETIF_MSG_TX_QUEUED, "SKB mapping failed - "
+ "silently dropping this SKB\n");
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+ /*
+ Please read carefully. First we use one BD which we mark as start,
+ then we have a parsing info BD (used for TSO or xsum),
+ and only then we have the rest of the TSO BDs.
+ (don't forget to mark the last one as last,
+ and to unmap only AFTER you write to the BD ...)
+ And above all, all pdb sizes are in words - NOT DWORDS!
+ */
+
+ /* get current pkt produced now - advance it just before sending packet
+ * since mapping of pages may fail and cause packet to be dropped
+ */
+ pkt_prod = txdata->tx_pkt_prod;
+ bd_prod = TX_BD(txdata->tx_bd_prod);
+
+ /* get a tx_buf and first BD
+ * tx_start_bd may be changed during SPLIT,
+ * but first_bd will always stay first
+ */
+ tx_buf = &txdata->tx_buf_ring[TX_BD(pkt_prod)];
+ tx_start_bd = &txdata->tx_desc_ring[bd_prod].start_bd;
+ first_bd = tx_start_bd;
+
+ tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
+ SET_FLAG(tx_start_bd->general_data, ETH_TX_START_BD_ETH_ADDR_TYPE,
+ mac_type);
+
+ /* header nbd */
+ SET_FLAG(tx_start_bd->general_data, ETH_TX_START_BD_HDR_NBDS, 1);
+
+ /* remember the first BD of the packet */
+ tx_buf->first_bd = txdata->tx_bd_prod;
+ tx_buf->skb = skb;
+ tx_buf->flags = 0;
+
+ DP(NETIF_MSG_TX_QUEUED,
+ "sending pkt %u @%p next_idx %u bd %u @%p\n",
+ pkt_prod, tx_buf, txdata->tx_pkt_prod, bd_prod, tx_start_bd);
+
+ if (vlan_tx_tag_present(skb)) {
+ tx_start_bd->vlan_or_ethertype =
+ cpu_to_le16(vlan_tx_tag_get(skb));
+ tx_start_bd->bd_flags.as_bitfield |=
+ (X_ETH_OUTBAND_VLAN << ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT);
+ } else
+ tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod);
+
+ /* turn on parsing and get a BD */
+ bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
+
+ if (xmit_type & XMIT_CSUM)
+ bnx2x_set_sbd_csum(bp, skb, tx_start_bd, xmit_type);
+
+ if (!CHIP_IS_E1x(bp)) {
+ pbd_e2 = &txdata->tx_desc_ring[bd_prod].parse_bd_e2;
+ memset(pbd_e2, 0, sizeof(struct eth_tx_parse_bd_e2));
+ /* Set PBD in checksum offload case */
+ if (xmit_type & XMIT_CSUM)
+ hlen = bnx2x_set_pbd_csum_e2(bp, skb,
+ &pbd_e2_parsing_data,
+ xmit_type);
+ if (IS_MF_SI(bp)) {
+ /*
+ * fill in the MAC addresses in the PBD - for local
+ * switching
+ */
+ bnx2x_set_fw_mac_addr(&pbd_e2->src_mac_addr_hi,
+ &pbd_e2->src_mac_addr_mid,
+ &pbd_e2->src_mac_addr_lo,
+ eth->h_source);
+ bnx2x_set_fw_mac_addr(&pbd_e2->dst_mac_addr_hi,
+ &pbd_e2->dst_mac_addr_mid,
+ &pbd_e2->dst_mac_addr_lo,
+ eth->h_dest);
+ }
+ } else {
+ pbd_e1x = &txdata->tx_desc_ring[bd_prod].parse_bd_e1x;
+ memset(pbd_e1x, 0, sizeof(struct eth_tx_parse_bd_e1x));
+ /* Set PBD in checksum offload case */
+ if (xmit_type & XMIT_CSUM)
+ hlen = bnx2x_set_pbd_csum(bp, skb, pbd_e1x, xmit_type);
+
+ }
+
+ /* Setup the data pointer of the first BD of the packet */
+ tx_start_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
+ tx_start_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
+ nbd = 2; /* start_bd + pbd + frags (updated when pages are mapped) */
+ tx_start_bd->nbytes = cpu_to_le16(skb_headlen(skb));
+ pkt_size = tx_start_bd->nbytes;
+
+ DP(NETIF_MSG_TX_QUEUED, "first bd @%p addr (%x:%x) nbd %d"
+ " nbytes %d flags %x vlan %x\n",
+ tx_start_bd, tx_start_bd->addr_hi, tx_start_bd->addr_lo,
+ le16_to_cpu(tx_start_bd->nbd), le16_to_cpu(tx_start_bd->nbytes),
+ tx_start_bd->bd_flags.as_bitfield,
+ le16_to_cpu(tx_start_bd->vlan_or_ethertype));
+
+ if (xmit_type & XMIT_GSO) {
+
+ DP(NETIF_MSG_TX_QUEUED,
+ "TSO packet len %d hlen %d total len %d tso size %d\n",
+ skb->len, hlen, skb_headlen(skb),
+ skb_shinfo(skb)->gso_size);
+
+ tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_SW_LSO;
+
+ if (unlikely(skb_headlen(skb) > hlen))
+ bd_prod = bnx2x_tx_split(bp, txdata, tx_buf,
+ &tx_start_bd, hlen,
+ bd_prod, ++nbd);
+ if (!CHIP_IS_E1x(bp))
+ bnx2x_set_pbd_gso_e2(skb, &pbd_e2_parsing_data,
+ xmit_type);
+ else
+ bnx2x_set_pbd_gso(skb, pbd_e1x, xmit_type);
+ }
+
+ /* Set the PBD's parsing_data field if not zero
+ * (for the chips newer than 57711).
+ */
+ if (pbd_e2_parsing_data)
+ pbd_e2->parsing_data = cpu_to_le32(pbd_e2_parsing_data);
+
+ tx_data_bd = (struct eth_tx_bd *)tx_start_bd;
+
+ /* Handle fragmented skb */
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+ mapping = dma_map_page(&bp->pdev->dev, frag->page,
+ frag->page_offset, frag->size,
+ DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
+
+ DP(NETIF_MSG_TX_QUEUED, "Unable to map page - "
+ "dropping packet...\n");
+
+ /* we need unmap all buffers already mapped
+ * for this SKB;
+ * first_bd->nbd need to be properly updated
+ * before call to bnx2x_free_tx_pkt
+ */
+ first_bd->nbd = cpu_to_le16(nbd);
+ bnx2x_free_tx_pkt(bp, txdata,
+ TX_BD(txdata->tx_pkt_prod));
+ return NETDEV_TX_OK;
+ }
+
+ bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
+ tx_data_bd = &txdata->tx_desc_ring[bd_prod].reg_bd;
+ if (total_pkt_bd == NULL)
+ total_pkt_bd = &txdata->tx_desc_ring[bd_prod].reg_bd;
+
+ tx_data_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
+ tx_data_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
+ tx_data_bd->nbytes = cpu_to_le16(frag->size);
+ le16_add_cpu(&pkt_size, frag->size);
+ nbd++;
+
+ DP(NETIF_MSG_TX_QUEUED,
+ "frag %d bd @%p addr (%x:%x) nbytes %d\n",
+ i, tx_data_bd, tx_data_bd->addr_hi, tx_data_bd->addr_lo,
+ le16_to_cpu(tx_data_bd->nbytes));
+ }
+
+ DP(NETIF_MSG_TX_QUEUED, "last bd @%p\n", tx_data_bd);
+
+ /* update with actual num BDs */
+ first_bd->nbd = cpu_to_le16(nbd);
+
+ bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
+
+ /* now send a tx doorbell, counting the next BD
+ * if the packet contains or ends with it
+ */
+ if (TX_BD_POFF(bd_prod) < nbd)
+ nbd++;
+
+ /* total_pkt_bytes should be set on the first data BD if
+ * it's not an LSO packet and there is more than one
+ * data BD. In this case pkt_size is limited by an MTU value.
+ * However we prefer to set it for an LSO packet (while we don't
+ * have to) in order to save some CPU cycles in a none-LSO
+ * case, when we much more care about them.
+ */
+ if (total_pkt_bd != NULL)
+ total_pkt_bd->total_pkt_bytes = pkt_size;
+
+ if (pbd_e1x)
+ DP(NETIF_MSG_TX_QUEUED,
+ "PBD (E1X) @%p ip_data %x ip_hlen %u ip_id %u lso_mss %u"
+ " tcp_flags %x xsum %x seq %u hlen %u\n",
+ pbd_e1x, pbd_e1x->global_data, pbd_e1x->ip_hlen_w,
+ pbd_e1x->ip_id, pbd_e1x->lso_mss, pbd_e1x->tcp_flags,
+ pbd_e1x->tcp_pseudo_csum, pbd_e1x->tcp_send_seq,
+ le16_to_cpu(pbd_e1x->total_hlen_w));
+ if (pbd_e2)
+ DP(NETIF_MSG_TX_QUEUED,
+ "PBD (E2) @%p dst %x %x %x src %x %x %x parsing_data %x\n",
+ pbd_e2, pbd_e2->dst_mac_addr_hi, pbd_e2->dst_mac_addr_mid,
+ pbd_e2->dst_mac_addr_lo, pbd_e2->src_mac_addr_hi,
+ pbd_e2->src_mac_addr_mid, pbd_e2->src_mac_addr_lo,
+ pbd_e2->parsing_data);
+ DP(NETIF_MSG_TX_QUEUED, "doorbell: nbd %d bd %u\n", nbd, bd_prod);
+
+ txdata->tx_pkt_prod++;
+ /*
+ * Make sure that the BD data is updated before updating the producer
+ * since FW might read the BD right after the producer is updated.
+ * This is only applicable for weak-ordered memory model archs such
+ * as IA-64. The following barrier is also mandatory since FW will
+ * assumes packets must have BDs.
+ */
+ wmb();
+
+ txdata->tx_db.data.prod += nbd;
+ barrier();
+
+ DOORBELL(bp, txdata->cid, txdata->tx_db.raw);
+
+ mmiowb();
+
+ txdata->tx_bd_prod += nbd;
+
+ if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 3)) {
+ netif_tx_stop_queue(txq);
+
+ /* paired memory barrier is in bnx2x_tx_int(), we have to keep
+ * ordering of set_bit() in netif_tx_stop_queue() and read of
+ * fp->bd_tx_cons */
+ smp_mb();
+
+ fp->eth_q_stats.driver_xoff++;
+ if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3)
+ netif_tx_wake_queue(txq);
+ }
+ txdata->tx_pkt++;
+
+ return NETDEV_TX_OK;
+}
+
+/**
+ * bnx2x_setup_tc - routine to configure net_device for multi tc
+ *
+ * @netdev: net device to configure
+ * @tc: number of traffic classes to enable
+ *
+ * callback connected to the ndo_setup_tc function pointer
+ */
+int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
+{
+ int cos, prio, count, offset;
+ struct bnx2x *bp = netdev_priv(dev);
+
+ /* setup tc must be called under rtnl lock */
+ ASSERT_RTNL();
+
+ /* no traffic classes requested. aborting */
+ if (!num_tc) {
+ netdev_reset_tc(dev);
+ return 0;
+ }
+
+ /* requested to support too many traffic classes */
+ if (num_tc > bp->max_cos) {
+ DP(NETIF_MSG_TX_ERR, "support for too many traffic classes"
+ " requested: %d. max supported is %d",
+ num_tc, bp->max_cos);
+ return -EINVAL;
+ }
+
+ /* declare amount of supported traffic classes */
+ if (netdev_set_num_tc(dev, num_tc)) {
+ DP(NETIF_MSG_TX_ERR, "failed to declare %d traffic classes",
+ num_tc);
+ return -EINVAL;
+ }
+
+ /* configure priority to traffic class mapping */
+ for (prio = 0; prio < BNX2X_MAX_PRIORITY; prio++) {
+ netdev_set_prio_tc_map(dev, prio, bp->prio_to_cos[prio]);
+ DP(BNX2X_MSG_SP, "mapping priority %d to tc %d",
+ prio, bp->prio_to_cos[prio]);
+ }
+
+
+ /* Use this configuration to diffrentiate tc0 from other COSes
+ This can be used for ets or pfc, and save the effort of setting
+ up a multio class queue disc or negotiating DCBX with a switch
+ netdev_set_prio_tc_map(dev, 0, 0);
+ DP(BNX2X_MSG_SP, "mapping priority %d to tc %d", 0, 0);
+ for (prio = 1; prio < 16; prio++) {
+ netdev_set_prio_tc_map(dev, prio, 1);
+ DP(BNX2X_MSG_SP, "mapping priority %d to tc %d", prio, 1);
+ } */
+
+ /* configure traffic class to transmission queue mapping */
+ for (cos = 0; cos < bp->max_cos; cos++) {
+ count = BNX2X_NUM_ETH_QUEUES(bp);
+ offset = cos * MAX_TXQS_PER_COS;
+ netdev_set_tc_queue(dev, cos, count, offset);
+ DP(BNX2X_MSG_SP, "mapping tc %d to offset %d count %d",
+ cos, offset, count);
+ }
+
+ return 0;
+}
+
+/* called with rtnl_lock */
+int bnx2x_change_mac_addr(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr = p;
+ struct bnx2x *bp = netdev_priv(dev);
+ int rc = 0;
+
+ if (!is_valid_ether_addr((u8 *)(addr->sa_data)))
+ return -EINVAL;
+
+ if (netif_running(dev)) {
+ rc = bnx2x_set_eth_mac(bp, false);
+ if (rc)
+ return rc;
+ }
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ if (netif_running(dev))
+ rc = bnx2x_set_eth_mac(bp, true);
+
+ return rc;
+}
+
+static void bnx2x_free_fp_mem_at(struct bnx2x *bp, int fp_index)
+{
+ union host_hc_status_block *sb = &bnx2x_fp(bp, fp_index, status_blk);
+ struct bnx2x_fastpath *fp = &bp->fp[fp_index];
+ u8 cos;
+
+ /* Common */
+#ifdef BCM_CNIC
+ if (IS_FCOE_IDX(fp_index)) {
+ memset(sb, 0, sizeof(union host_hc_status_block));
+ fp->status_blk_mapping = 0;
+
+ } else {
+#endif
+ /* status blocks */
+ if (!CHIP_IS_E1x(bp))
+ BNX2X_PCI_FREE(sb->e2_sb,
+ bnx2x_fp(bp, fp_index,
+ status_blk_mapping),
+ sizeof(struct host_hc_status_block_e2));
+ else
+ BNX2X_PCI_FREE(sb->e1x_sb,
+ bnx2x_fp(bp, fp_index,
+ status_blk_mapping),
+ sizeof(struct host_hc_status_block_e1x));
+#ifdef BCM_CNIC
+ }
+#endif
+ /* Rx */
+ if (!skip_rx_queue(bp, fp_index)) {
+ bnx2x_free_rx_bds(fp);
+
+ /* fastpath rx rings: rx_buf rx_desc rx_comp */
+ BNX2X_FREE(bnx2x_fp(bp, fp_index, rx_buf_ring));
+ BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_desc_ring),
+ bnx2x_fp(bp, fp_index, rx_desc_mapping),
+ sizeof(struct eth_rx_bd) * NUM_RX_BD);
+
+ BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_comp_ring),
+ bnx2x_fp(bp, fp_index, rx_comp_mapping),
+ sizeof(struct eth_fast_path_rx_cqe) *
+ NUM_RCQ_BD);
+
+ /* SGE ring */
+ BNX2X_FREE(bnx2x_fp(bp, fp_index, rx_page_ring));
+ BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_sge_ring),
+ bnx2x_fp(bp, fp_index, rx_sge_mapping),
+ BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
+ }
+
+ /* Tx */
+ if (!skip_tx_queue(bp, fp_index)) {
+ /* fastpath tx rings: tx_buf tx_desc */
+ for_each_cos_in_tx_queue(fp, cos) {
+ struct bnx2x_fp_txdata *txdata = &fp->txdata[cos];
+
+ DP(BNX2X_MSG_SP,
+ "freeing tx memory of fp %d cos %d cid %d",
+ fp_index, cos, txdata->cid);
+
+ BNX2X_FREE(txdata->tx_buf_ring);
+ BNX2X_PCI_FREE(txdata->tx_desc_ring,
+ txdata->tx_desc_mapping,
+ sizeof(union eth_tx_bd_types) * NUM_TX_BD);
+ }
+ }
+ /* end of fastpath */
+}
+
+void bnx2x_free_fp_mem(struct bnx2x *bp)
+{
+ int i;
+ for_each_queue(bp, i)
+ bnx2x_free_fp_mem_at(bp, i);
+}
+
+static inline void set_sb_shortcuts(struct bnx2x *bp, int index)
+{
+ union host_hc_status_block status_blk = bnx2x_fp(bp, index, status_blk);
+ if (!CHIP_IS_E1x(bp)) {
+ bnx2x_fp(bp, index, sb_index_values) =
+ (__le16 *)status_blk.e2_sb->sb.index_values;
+ bnx2x_fp(bp, index, sb_running_index) =
+ (__le16 *)status_blk.e2_sb->sb.running_index;
+ } else {
+ bnx2x_fp(bp, index, sb_index_values) =
+ (__le16 *)status_blk.e1x_sb->sb.index_values;
+ bnx2x_fp(bp, index, sb_running_index) =
+ (__le16 *)status_blk.e1x_sb->sb.running_index;
+ }
+}
+
+static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index)
+{
+ union host_hc_status_block *sb;
+ struct bnx2x_fastpath *fp = &bp->fp[index];
+ int ring_size = 0;
+ u8 cos;
+
+ /* if rx_ring_size specified - use it */
+ int rx_ring_size = bp->rx_ring_size ? bp->rx_ring_size :
+ MAX_RX_AVAIL/BNX2X_NUM_RX_QUEUES(bp);
+
+ /* allocate at least number of buffers required by FW */
+ rx_ring_size = max_t(int, bp->disable_tpa ? MIN_RX_SIZE_NONTPA :
+ MIN_RX_SIZE_TPA,
+ rx_ring_size);
+
+ /* Common */
+ sb = &bnx2x_fp(bp, index, status_blk);
+#ifdef BCM_CNIC
+ if (!IS_FCOE_IDX(index)) {
+#endif
+ /* status blocks */
+ if (!CHIP_IS_E1x(bp))
+ BNX2X_PCI_ALLOC(sb->e2_sb,
+ &bnx2x_fp(bp, index, status_blk_mapping),
+ sizeof(struct host_hc_status_block_e2));
+ else
+ BNX2X_PCI_ALLOC(sb->e1x_sb,
+ &bnx2x_fp(bp, index, status_blk_mapping),
+ sizeof(struct host_hc_status_block_e1x));
+#ifdef BCM_CNIC
+ }
+#endif
+
+ /* FCoE Queue uses Default SB and doesn't ACK the SB, thus no need to
+ * set shortcuts for it.
+ */
+ if (!IS_FCOE_IDX(index))
+ set_sb_shortcuts(bp, index);
+
+ /* Tx */
+ if (!skip_tx_queue(bp, index)) {
+ /* fastpath tx rings: tx_buf tx_desc */
+ for_each_cos_in_tx_queue(fp, cos) {
+ struct bnx2x_fp_txdata *txdata = &fp->txdata[cos];
+
+ DP(BNX2X_MSG_SP, "allocating tx memory of "
+ "fp %d cos %d",
+ index, cos);
+
+ BNX2X_ALLOC(txdata->tx_buf_ring,
+ sizeof(struct sw_tx_bd) * NUM_TX_BD);
+ BNX2X_PCI_ALLOC(txdata->tx_desc_ring,
+ &txdata->tx_desc_mapping,
+ sizeof(union eth_tx_bd_types) * NUM_TX_BD);
+ }
+ }
+
+ /* Rx */
+ if (!skip_rx_queue(bp, index)) {
+ /* fastpath rx rings: rx_buf rx_desc rx_comp */
+ BNX2X_ALLOC(bnx2x_fp(bp, index, rx_buf_ring),
+ sizeof(struct sw_rx_bd) * NUM_RX_BD);
+ BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_desc_ring),
+ &bnx2x_fp(bp, index, rx_desc_mapping),
+ sizeof(struct eth_rx_bd) * NUM_RX_BD);
+
+ BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_comp_ring),
+ &bnx2x_fp(bp, index, rx_comp_mapping),
+ sizeof(struct eth_fast_path_rx_cqe) *
+ NUM_RCQ_BD);
+
+ /* SGE ring */
+ BNX2X_ALLOC(bnx2x_fp(bp, index, rx_page_ring),
+ sizeof(struct sw_rx_page) * NUM_RX_SGE);
+ BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_sge_ring),
+ &bnx2x_fp(bp, index, rx_sge_mapping),
+ BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
+ /* RX BD ring */
+ bnx2x_set_next_page_rx_bd(fp);
+
+ /* CQ ring */
+ bnx2x_set_next_page_rx_cq(fp);
+
+ /* BDs */
+ ring_size = bnx2x_alloc_rx_bds(fp, rx_ring_size);
+ if (ring_size < rx_ring_size)
+ goto alloc_mem_err;
+ }
+
+ return 0;
+
+/* handles low memory cases */
+alloc_mem_err:
+ BNX2X_ERR("Unable to allocate full memory for queue %d (size %d)\n",
+ index, ring_size);
+ /* FW will drop all packets if queue is not big enough,
+ * In these cases we disable the queue
+ * Min size is different for OOO, TPA and non-TPA queues
+ */
+ if (ring_size < (fp->disable_tpa ?
+ MIN_RX_SIZE_NONTPA : MIN_RX_SIZE_TPA)) {
+ /* release memory allocated for this queue */
+ bnx2x_free_fp_mem_at(bp, index);
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+int bnx2x_alloc_fp_mem(struct bnx2x *bp)
+{
+ int i;
+
+ /**
+ * 1. Allocate FP for leading - fatal if error
+ * 2. {CNIC} Allocate FCoE FP - fatal if error
+ * 3. {CNIC} Allocate OOO + FWD - disable OOO if error
+ * 4. Allocate RSS - fix number of queues if error
+ */
+
+ /* leading */
+ if (bnx2x_alloc_fp_mem_at(bp, 0))
+ return -ENOMEM;
+
+#ifdef BCM_CNIC
+ if (!NO_FCOE(bp))
+ /* FCoE */
+ if (bnx2x_alloc_fp_mem_at(bp, FCOE_IDX))
+ /* we will fail load process instead of mark
+ * NO_FCOE_FLAG
+ */
+ return -ENOMEM;
+#endif
+
+ /* RSS */
+ for_each_nondefault_eth_queue(bp, i)
+ if (bnx2x_alloc_fp_mem_at(bp, i))
+ break;
+
+ /* handle memory failures */
+ if (i != BNX2X_NUM_ETH_QUEUES(bp)) {
+ int delta = BNX2X_NUM_ETH_QUEUES(bp) - i;
+
+ WARN_ON(delta < 0);
+#ifdef BCM_CNIC
+ /**
+ * move non eth FPs next to last eth FP
+ * must be done in that order
+ * FCOE_IDX < FWD_IDX < OOO_IDX
+ */
+
+ /* move FCoE fp even NO_FCOE_FLAG is on */
+ bnx2x_move_fp(bp, FCOE_IDX, FCOE_IDX - delta);
+#endif
+ bp->num_queues -= delta;
+ BNX2X_ERR("Adjusted num of queues from %d to %d\n",
+ bp->num_queues + delta, bp->num_queues);
+ }
+
+ return 0;
+}
+
+void bnx2x_free_mem_bp(struct bnx2x *bp)
+{
+ kfree(bp->fp);
+ kfree(bp->msix_table);
+ kfree(bp->ilt);
+}
+
+int __devinit bnx2x_alloc_mem_bp(struct bnx2x *bp)
+{
+ struct bnx2x_fastpath *fp;
+ struct msix_entry *tbl;
+ struct bnx2x_ilt *ilt;
+ int msix_table_size = 0;
+
+ /*
+ * The biggest MSI-X table we might need is as a maximum number of fast
+ * path IGU SBs plus default SB (for PF).
+ */
+ msix_table_size = bp->igu_sb_cnt + 1;
+
+ /* fp array: RSS plus CNIC related L2 queues */
+ fp = kzalloc((BNX2X_MAX_RSS_COUNT(bp) + NON_ETH_CONTEXT_USE) *
+ sizeof(*fp), GFP_KERNEL);
+ if (!fp)
+ goto alloc_err;
+ bp->fp = fp;
+
+ /* msix table */
+ tbl = kzalloc(msix_table_size * sizeof(*tbl), GFP_KERNEL);
+ if (!tbl)
+ goto alloc_err;
+ bp->msix_table = tbl;
+
+ /* ilt */
+ ilt = kzalloc(sizeof(*ilt), GFP_KERNEL);
+ if (!ilt)
+ goto alloc_err;
+ bp->ilt = ilt;
+
+ return 0;
+alloc_err:
+ bnx2x_free_mem_bp(bp);
+ return -ENOMEM;
+
+}
+
+int bnx2x_reload_if_running(struct net_device *dev)
+{
+ struct bnx2x *bp = netdev_priv(dev);
+
+ if (unlikely(!netif_running(dev)))
+ return 0;
+
+ bnx2x_nic_unload(bp, UNLOAD_NORMAL);
+ return bnx2x_nic_load(bp, LOAD_NORMAL);
+}
+
+int bnx2x_get_cur_phy_idx(struct bnx2x *bp)
+{
+ u32 sel_phy_idx = 0;
+ if (bp->link_params.num_phys <= 1)
+ return INT_PHY;
+
+ if (bp->link_vars.link_up) {
+ sel_phy_idx = EXT_PHY1;
+ /* In case link is SERDES, check if the EXT_PHY2 is the one */
+ if ((bp->link_vars.link_status & LINK_STATUS_SERDES_LINK) &&
+ (bp->link_params.phy[EXT_PHY2].supported & SUPPORTED_FIBRE))
+ sel_phy_idx = EXT_PHY2;
+ } else {
+
+ switch (bnx2x_phy_selection(&bp->link_params)) {
+ case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
+ case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY:
+ case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
+ sel_phy_idx = EXT_PHY1;
+ break;
+ case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY:
+ case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
+ sel_phy_idx = EXT_PHY2;
+ break;
+ }
+ }
+
+ return sel_phy_idx;
+
+}
+int bnx2x_get_link_cfg_idx(struct bnx2x *bp)
+{
+ u32 sel_phy_idx = bnx2x_get_cur_phy_idx(bp);
+ /*
+ * The selected actived PHY is always after swapping (in case PHY
+ * swapping is enabled). So when swapping is enabled, we need to reverse
+ * the configuration
+ */
+
+ if (bp->link_params.multi_phy_config &
+ PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
+ if (sel_phy_idx == EXT_PHY1)
+ sel_phy_idx = EXT_PHY2;
+ else if (sel_phy_idx == EXT_PHY2)
+ sel_phy_idx = EXT_PHY1;
+ }
+ return LINK_CONFIG_IDX(sel_phy_idx);
+}
+
+#if defined(NETDEV_FCOE_WWNN) && defined(BCM_CNIC)
+int bnx2x_fcoe_get_wwn(struct net_device *dev, u64 *wwn, int type)
+{
+ struct bnx2x *bp = netdev_priv(dev);
+ struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+ switch (type) {
+ case NETDEV_FCOE_WWNN:
+ *wwn = HILO_U64(cp->fcoe_wwn_node_name_hi,
+ cp->fcoe_wwn_node_name_lo);
+ break;
+ case NETDEV_FCOE_WWPN:
+ *wwn = HILO_U64(cp->fcoe_wwn_port_name_hi,
+ cp->fcoe_wwn_port_name_lo);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+#endif
+
+/* called with rtnl_lock */
+int bnx2x_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct bnx2x *bp = netdev_priv(dev);
+
+ if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
+ printk(KERN_ERR "Handling parity error recovery. Try again later\n");
+ return -EAGAIN;
+ }
+
+ if ((new_mtu > ETH_MAX_JUMBO_PACKET_SIZE) ||
+ ((new_mtu + ETH_HLEN) < ETH_MIN_PACKET_SIZE))
+ return -EINVAL;
+
+ /* This does not race with packet allocation
+ * because the actual alloc size is
+ * only updated as part of load
+ */
+ dev->mtu = new_mtu;
+
+ return bnx2x_reload_if_running(dev);
+}
+
+u32 bnx2x_fix_features(struct net_device *dev, u32 features)
+{
+ struct bnx2x *bp = netdev_priv(dev);
+
+ /* TPA requires Rx CSUM offloading */
+ if (!(features & NETIF_F_RXCSUM) || bp->disable_tpa)
+ features &= ~NETIF_F_LRO;
+
+ return features;
+}
+
+int bnx2x_set_features(struct net_device *dev, u32 features)
+{
+ struct bnx2x *bp = netdev_priv(dev);
+ u32 flags = bp->flags;
+ bool bnx2x_reload = false;
+
+ if (features & NETIF_F_LRO)
+ flags |= TPA_ENABLE_FLAG;
+ else
+ flags &= ~TPA_ENABLE_FLAG;
+
+ if (features & NETIF_F_LOOPBACK) {
+ if (bp->link_params.loopback_mode != LOOPBACK_BMAC) {
+ bp->link_params.loopback_mode = LOOPBACK_BMAC;
+ bnx2x_reload = true;
+ }
+ } else {
+ if (bp->link_params.loopback_mode != LOOPBACK_NONE) {
+ bp->link_params.loopback_mode = LOOPBACK_NONE;
+ bnx2x_reload = true;
+ }
+ }
+
+ if (flags ^ bp->flags) {
+ bp->flags = flags;
+ bnx2x_reload = true;
+ }
+
+ if (bnx2x_reload) {
+ if (bp->recovery_state == BNX2X_RECOVERY_DONE)
+ return bnx2x_reload_if_running(dev);
+ /* else: bnx2x_nic_load() will be called at end of recovery */
+ }
+
+ return 0;
+}
+
+void bnx2x_tx_timeout(struct net_device *dev)
+{
+ struct bnx2x *bp = netdev_priv(dev);
+
+#ifdef BNX2X_STOP_ON_ERROR
+ if (!bp->panic)
+ bnx2x_panic();
+#endif
+
+ smp_mb__before_clear_bit();
+ set_bit(BNX2X_SP_RTNL_TX_TIMEOUT, &bp->sp_rtnl_state);
+ smp_mb__after_clear_bit();
+
+ /* This allows the netif to be shutdown gracefully before resetting */
+ schedule_delayed_work(&bp->sp_rtnl_task, 0);
+}
+
+int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct bnx2x *bp;
+
+ if (!dev) {
+ dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n");
+ return -ENODEV;
+ }
+ bp = netdev_priv(dev);
+
+ rtnl_lock();
+
+ pci_save_state(pdev);
+
+ if (!netif_running(dev)) {
+ rtnl_unlock();
+ return 0;
+ }
+
+ netif_device_detach(dev);
+
+ bnx2x_nic_unload(bp, UNLOAD_CLOSE);
+
+ bnx2x_set_power_state(bp, pci_choose_state(pdev, state));
+
+ rtnl_unlock();
+
+ return 0;
+}
+
+int bnx2x_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct bnx2x *bp;
+ int rc;
+
+ if (!dev) {
+ dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n");
+ return -ENODEV;
+ }
+ bp = netdev_priv(dev);
+
+ if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
+ printk(KERN_ERR "Handling parity error recovery. Try again later\n");
+ return -EAGAIN;
+ }
+
+ rtnl_lock();
+
+ pci_restore_state(pdev);
+
+ if (!netif_running(dev)) {
+ rtnl_unlock();
+ return 0;
+ }
+
+ bnx2x_set_power_state(bp, PCI_D0);
+ netif_device_attach(dev);
+
+ /* Since the chip was reset, clear the FW sequence number */
+ bp->fw_seq = 0;
+ rc = bnx2x_nic_load(bp, LOAD_OPEN);
+
+ rtnl_unlock();
+
+ return rc;
+}
+
+
+void bnx2x_set_ctx_validation(struct bnx2x *bp, struct eth_context *cxt,
+ u32 cid)
+{
+ /* ustorm cxt validation */
+ cxt->ustorm_ag_context.cdu_usage =
+ CDU_RSRVD_VALUE_TYPE_A(HW_CID(bp, cid),
+ CDU_REGION_NUMBER_UCM_AG, ETH_CONNECTION_TYPE);
+ /* xcontext validation */
+ cxt->xstorm_ag_context.cdu_reserved =
+ CDU_RSRVD_VALUE_TYPE_A(HW_CID(bp, cid),
+ CDU_REGION_NUMBER_XCM_AG, ETH_CONNECTION_TYPE);
+}
+
+static inline void storm_memset_hc_timeout(struct bnx2x *bp, u8 port,
+ u8 fw_sb_id, u8 sb_index,
+ u8 ticks)
+{
+
+ u32 addr = BAR_CSTRORM_INTMEM +
+ CSTORM_STATUS_BLOCK_DATA_TIMEOUT_OFFSET(fw_sb_id, sb_index);
+ REG_WR8(bp, addr, ticks);
+ DP(NETIF_MSG_HW, "port %x fw_sb_id %d sb_index %d ticks %d\n",
+ port, fw_sb_id, sb_index, ticks);
+}
+
+static inline void storm_memset_hc_disable(struct bnx2x *bp, u8 port,
+ u16 fw_sb_id, u8 sb_index,
+ u8 disable)
+{
+ u32 enable_flag = disable ? 0 : (1 << HC_INDEX_DATA_HC_ENABLED_SHIFT);
+ u32 addr = BAR_CSTRORM_INTMEM +
+ CSTORM_STATUS_BLOCK_DATA_FLAGS_OFFSET(fw_sb_id, sb_index);
+ u16 flags = REG_RD16(bp, addr);
+ /* clear and set */
+ flags &= ~HC_INDEX_DATA_HC_ENABLED;
+ flags |= enable_flag;
+ REG_WR16(bp, addr, flags);
+ DP(NETIF_MSG_HW, "port %x fw_sb_id %d sb_index %d disable %d\n",
+ port, fw_sb_id, sb_index, disable);
+}
+
+void bnx2x_update_coalesce_sb_index(struct bnx2x *bp, u8 fw_sb_id,
+ u8 sb_index, u8 disable, u16 usec)
+{
+ int port = BP_PORT(bp);
+ u8 ticks = usec / BNX2X_BTR;
+
+ storm_memset_hc_timeout(bp, port, fw_sb_id, sb_index, ticks);
+
+ disable = disable ? 1 : (usec ? 0 : 1);
+ storm_memset_hc_disable(bp, port, fw_sb_id, sb_index, disable);
+}
git.openpandora.org / pandora-kernel.git / blobdiff