static int use_carrier = 1;
static char *mode;
static char *primary;
+static char *primary_reselect;
static char *lacp_rate;
static char *ad_select;
static char *xmit_hash_policy;
"6 for balance-alb");
module_param(primary, charp, 0);
MODULE_PARM_DESC(primary, "Primary network device to use");
+module_param(primary_reselect, charp, 0);
+MODULE_PARM_DESC(primary_reselect, "Reselect primary slave "
+ "once it comes up; "
+ "0 for always (default), "
+ "1 for only if speed of primary is "
+ "better, "
+ "2 for only on active slave "
+ "failure");
module_param(lacp_rate, charp, 0);
MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner "
"(slow/fast)");
{ NULL, -1},
};
+const struct bond_parm_tbl pri_reselect_tbl[] = {
+{ "always", BOND_PRI_RESELECT_ALWAYS},
+{ "better", BOND_PRI_RESELECT_BETTER},
+{ "failure", BOND_PRI_RESELECT_FAILURE},
+{ NULL, -1},
+};
+
struct bond_parm_tbl ad_select_tbl[] = {
{ "stable", BOND_AD_STABLE},
{ "bandwidth", BOND_AD_BANDWIDTH},
}
+static bool bond_should_change_active(struct bonding *bond)
+{
+ struct slave *prim = bond->primary_slave;
+ struct slave *curr = bond->curr_active_slave;
+
+ if (!prim || !curr || curr->link != BOND_LINK_UP)
+ return true;
+ if (bond->force_primary) {
+ bond->force_primary = false;
+ return true;
+ }
+ if (bond->params.primary_reselect == BOND_PRI_RESELECT_BETTER &&
+ (prim->speed < curr->speed ||
+ (prim->speed == curr->speed && prim->duplex <= curr->duplex)))
+ return false;
+ if (bond->params.primary_reselect == BOND_PRI_RESELECT_FAILURE)
+ return false;
+ return true;
+}
/**
* find_best_interface - select the best available slave to be the active one
int mintime = bond->params.updelay;
int i;
- new_active = old_active = bond->curr_active_slave;
+ new_active = bond->curr_active_slave;
if (!new_active) { /* there were no active slaves left */
if (bond->slave_cnt > 0) /* found one slave */
return NULL; /* still no slave, return NULL */
}
- /*
- * first try the primary link; if arping, a link must tx/rx
- * traffic before it can be considered the curr_active_slave.
- * also, we would skip slaves between the curr_active_slave
- * and primary_slave that may be up and able to arp
- */
if ((bond->primary_slave) &&
- (!bond->params.arp_interval) &&
- (IS_UP(bond->primary_slave->dev))) {
+ bond->primary_slave->link == BOND_LINK_UP &&
+ bond_should_change_active(bond)) {
new_active = bond->primary_slave;
}
old_active = new_active;
bond_for_each_slave_from(bond, new_active, i, old_active) {
- if (IS_UP(new_active->dev)) {
- if (new_active->link == BOND_LINK_UP) {
- return new_active;
- } else if (new_active->link == BOND_LINK_BACK) {
- /* link up, but waiting for stabilization */
- if (new_active->delay < mintime) {
- mintime = new_active->delay;
- bestslave = new_active;
- }
+ if (new_active->link == BOND_LINK_UP) {
+ return new_active;
+ } else if (new_active->link == BOND_LINK_BACK &&
+ IS_UP(new_active->dev)) {
+ /* link up, but waiting for stabilization */
+ if (new_active->delay < mintime) {
+ mintime = new_active->delay;
+ bestslave = new_active;
}
}
}
write_unlock_bh(&bond->curr_slave_lock);
read_unlock(&bond->lock);
- netdev_bonding_change(bond->dev);
+ netdev_bonding_change(bond->dev, NETDEV_BONDING_FAILOVER);
read_lock(&bond->lock);
write_lock_bh(&bond->curr_slave_lock);
*/
if (bond->slave_cnt == 0) {
if (bond_dev->type != slave_dev->type) {
- dev_close(bond_dev);
pr_debug("%s: change device type from %d to %d\n",
bond_dev->name, bond_dev->type, slave_dev->type);
+
+ netdev_bonding_change(bond_dev, NETDEV_BONDING_OLDTYPE);
+
if (slave_dev->type != ARPHRD_ETHER)
bond_setup_by_slave(bond_dev, slave_dev);
else
ether_setup(bond_dev);
- dev_open(bond_dev);
+
+ netdev_bonding_change(bond_dev, NETDEV_BONDING_NEWTYPE);
}
} else if (bond_dev->type != slave_dev->type) {
pr_err(DRV_NAME ": %s ether type (%d) is different "
if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
/* if there is a primary slave, remember it */
- if (strcmp(bond->params.primary, new_slave->dev->name) == 0)
+ if (strcmp(bond->params.primary, new_slave->dev->name) == 0) {
bond->primary_slave = new_slave;
+ bond->force_primary = true;
+ }
}
write_lock_bh(&bond->curr_slave_lock);
}
}
- read_lock(&bond->curr_slave_lock);
-
- /*
- * Trigger a commit if the primary option setting has changed.
- */
- if (bond->primary_slave &&
- (bond->primary_slave != bond->curr_active_slave) &&
- (bond->primary_slave->link == BOND_LINK_UP))
- commit++;
-
- read_unlock(&bond->curr_slave_lock);
-
return commit;
}
continue;
case BOND_LINK_UP:
- write_lock_bh(&bond->curr_slave_lock);
-
- if (!bond->curr_active_slave &&
- time_before_eq(jiffies, dev_trans_start(slave->dev) +
- delta_in_ticks)) {
+ if ((!bond->curr_active_slave &&
+ time_before_eq(jiffies,
+ dev_trans_start(slave->dev) +
+ delta_in_ticks)) ||
+ bond->curr_active_slave != slave) {
slave->link = BOND_LINK_UP;
- bond_change_active_slave(bond, slave);
bond->current_arp_slave = NULL;
pr_info(DRV_NAME
- ": %s: %s is up and now the "
- "active interface\n",
- bond->dev->name, slave->dev->name);
-
- } else if (bond->curr_active_slave != slave) {
- /* this slave has just come up but we
- * already have a current slave; this can
- * also happen if bond_enslave adds a new
- * slave that is up while we are searching
- * for a new slave
- */
- slave->link = BOND_LINK_UP;
- bond_set_slave_inactive_flags(slave);
- bond->current_arp_slave = NULL;
+ ": %s: link status definitely "
+ "up for interface %s.\n",
+ bond->dev->name, slave->dev->name);
- pr_info(DRV_NAME
- ": %s: backup interface %s is now up\n",
- bond->dev->name, slave->dev->name);
- }
+ if (!bond->curr_active_slave ||
+ (slave == bond->primary_slave))
+ goto do_failover;
- write_unlock_bh(&bond->curr_slave_lock);
+ }
- break;
+ continue;
case BOND_LINK_DOWN:
if (slave->link_failure_count < UINT_MAX)
slave->link_failure_count++;
slave->link = BOND_LINK_DOWN;
+ bond_set_slave_inactive_flags(slave);
- if (slave == bond->curr_active_slave) {
- pr_info(DRV_NAME
- ": %s: link status down for active "
- "interface %s, disabling it\n",
- bond->dev->name, slave->dev->name);
-
- bond_set_slave_inactive_flags(slave);
-
- write_lock_bh(&bond->curr_slave_lock);
-
- bond_select_active_slave(bond);
- if (bond->curr_active_slave)
- bond->curr_active_slave->jiffies =
- jiffies;
-
- write_unlock_bh(&bond->curr_slave_lock);
+ pr_info(DRV_NAME
+ ": %s: link status definitely down for "
+ "interface %s, disabling it\n",
+ bond->dev->name, slave->dev->name);
+ if (slave == bond->curr_active_slave) {
bond->current_arp_slave = NULL;
-
- } else if (slave->state == BOND_STATE_BACKUP) {
- pr_info(DRV_NAME
- ": %s: backup interface %s is now down\n",
- bond->dev->name, slave->dev->name);
-
- bond_set_slave_inactive_flags(slave);
+ goto do_failover;
}
- break;
+
+ continue;
default:
pr_err(DRV_NAME
": %s: impossible: new_link %d on slave %s\n",
bond->dev->name, slave->new_link,
slave->dev->name);
+ continue;
}
- }
- /*
- * No race with changes to primary via sysfs, as we hold rtnl.
- */
- if (bond->primary_slave &&
- (bond->primary_slave != bond->curr_active_slave) &&
- (bond->primary_slave->link == BOND_LINK_UP)) {
+do_failover:
+ ASSERT_RTNL();
write_lock_bh(&bond->curr_slave_lock);
- bond_change_active_slave(bond, bond->primary_slave);
+ bond_select_active_slave(bond);
write_unlock_bh(&bond->curr_slave_lock);
}
}
if (USES_PRIMARY(bond->params.mode)) {
- seq_printf(seq, "Primary Slave: %s\n",
+ seq_printf(seq, "Primary Slave: %s",
(bond->primary_slave) ?
bond->primary_slave->dev->name : "None");
+ if (bond->primary_slave)
+ seq_printf(seq, " (primary_reselect %s)",
+ pri_reselect_tbl[bond->params.primary_reselect].modename);
- seq_printf(seq, "Currently Active Slave: %s\n",
+ seq_printf(seq, "\nCurrently Active Slave: %s\n",
(curr) ? curr->dev->name : "None");
}
static int bond_check_params(struct bond_params *params)
{
- int arp_validate_value, fail_over_mac_value;
+ int arp_validate_value, fail_over_mac_value, primary_reselect_value;
/*
* Convert string parameters.
if ((bond_mode != BOND_MODE_XOR) &&
(bond_mode != BOND_MODE_8023AD)) {
pr_info(DRV_NAME
- ": xor_mode param is irrelevant in mode %s\n",
+ ": xmit_hash_policy param is irrelevant in"
+ " mode %s\n",
bond_mode_name(bond_mode));
} else {
xmit_hashtype = bond_parse_parm(xmit_hash_policy,
primary = NULL;
}
+ if (primary && primary_reselect) {
+ primary_reselect_value = bond_parse_parm(primary_reselect,
+ pri_reselect_tbl);
+ if (primary_reselect_value == -1) {
+ pr_err(DRV_NAME
+ ": Error: Invalid primary_reselect \"%s\"\n",
+ primary_reselect ==
+ NULL ? "NULL" : primary_reselect);
+ return -EINVAL;
+ }
+ } else {
+ primary_reselect_value = BOND_PRI_RESELECT_ALWAYS;
+ }
+
if (fail_over_mac) {
fail_over_mac_value = bond_parse_parm(fail_over_mac,
fail_over_mac_tbl);
params->use_carrier = use_carrier;
params->lacp_fast = lacp_fast;
params->primary[0] = 0;
+ params->primary_reselect = primary_reselect_value;
params->fail_over_mac = fail_over_mac_value;
if (primary) {