-
#
# Network device configuration
#
# that for each of the symbols.
if NETDEVICES
-config COMPAT_NET_DEV_OPS
- default y
- bool "Enable older network device API compatibility"
- ---help---
- This option enables kernel compatibility with older network devices
- that do not use net_device_ops interface.
-
- If unsure, say Y.
-
config IFB
tristate "Intermediate Functional Block support"
depends on NET_CLS_ACT
config SH_ETH
tristate "Renesas SuperH Ethernet support"
depends on SUPERH && \
- (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763 || \
- CPU_SUBTYPE_SH7619)
+ (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \
+ CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \
+ CPU_SUBTYPE_SH7724)
select CRC32
select MII
select MDIO_BITBANG
select PHYLIB
help
Renesas SuperH Ethernet device driver.
- This driver support SH7710, SH7712, SH7763 and SH7619.
+ This driver support SH7710, SH7712, SH7763, SH7619, and SH7724.
config SUNLANCE
tristate "Sun LANCE support"
To compile this driver as a module, choose M here. The module
will be called netx-eth.
+config TI_DAVINCI_EMAC
+ tristate "TI DaVinci EMAC Support"
+ depends on ARM && ARCH_DAVINCI
+ select PHYLIB
+ help
+ This driver supports TI's DaVinci Ethernet .
+
+ To compile this driver as a module, choose M here: the module
+ will be called davinci_emac_driver. This is recommended.
+
config DM9000
tristate "DM9000 support"
depends on ARM || BLACKFIN || MIPS
config SMSC911X
tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
- depends on ARM || SUPERH
+ depends on ARM || SUPERH || BLACKFIN
select CRC32
select MII
select PHYLIB
Please email feedback to <torben.mathiasen@compaq.com>.
+config KS8842
+ tristate "Micrel KSZ8842"
+ help
+ This platform driver is for Micrel KSZ8842 chip.
+
config VIA_RHINE
tristate "VIA Rhine support"
depends on NET_PCI && PCI
the Motorola 68360 processor.
config FEC
- bool "FEC ethernet controller (of ColdFire CPUs)"
- depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27
+ bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
+ depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 || ARCH_MX35
help
Say Y here if you want to use the built-in 10/100 Fast ethernet
controller on some Motorola ColdFire and Freescale i.MX processors.
---help---
This option enables support for the MPC5200's on-chip
Fast Ethernet Controller
- If compiled as module, it will be called 'fec_mpc52xx.ko'.
+ If compiled as module, it will be called fec_mpc52xx.
config FEC_MPC52xx_MDIO
bool "MPC52xx FEC MDIO bus driver"
(Motorola? industry standard).
If your board uses an external PHY connected to FEC, enable this.
If not sure, enable.
- If compiled as module, it will be called 'fec_mpc52xx_phy.ko'.
+ If compiled as module, it will be called fec_mpc52xx_phy.
config NE_H8300
tristate "NE2000 compatible support for H8/300"
depends on SKGE && DEBUG_FS
help
This option adds the ability to dump driver state for debugging.
- The file debugfs/skge/ethX displays the state of the internal
+ The file /sys/kernel/debug/skge/ethX displays the state of the internal
transmit and receive rings.
If unsure, say N.
depends on SKY2 && DEBUG_FS
help
This option adds the ability to dump driver state for debugging.
- The file debugfs/sky2/ethX displays the state of the internal
+ The file /sys/kernel/debug/sky2/ethX displays the state of the internal
transmit and receive rings.
If unsure, say N.
config CNIC
tristate "Broadcom CNIC support"
- depends on BNX2
- depends on UIO
+ depends on PCI
+ select BNX2
+ select UIO
help
This driver supports offload features of Broadcom NetXtremeII
gigabit Ethernet cards.
config MV643XX_ETH
tristate "Marvell Discovery (643XX) and Orion ethernet support"
- depends on MV64360 || MV64X60 || (PPC_MULTIPLATFORM && PPC32) || PLAT_ORION
+ depends on MV64X60 || PPC32 || PLAT_ORION
select INET_LRO
select PHYLIB
help
Some boards that use the Discovery chipset are the Momenco
Ocelot C and Jaguar ATX and Pegasos II.
+config XILINX_LL_TEMAC
+ tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
+ select PHYLIB
+ depends on PPC_DCR_NATIVE
+ help
+ This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
+ core used in Xilinx Spartan and Virtex FPGAs
+
config QLA3XXX
tristate "QLogic QLA3XXX Network Driver Support"
depends on PCI
To compile this driver as a module, choose M here. The module
will be called jme.
+config S6GMAC
+ tristate "S6105 GMAC ethernet support"
+ depends on XTENSA_VARIANT_S6000
+ select PHYLIB
+ help
+ This driver supports the on chip ethernet device on the
+ S6105 xtensa processor.
+
+ To compile this driver as a module, choose M here. The module
+ will be called s6gmac.
+
endif # NETDEV_1000
#
if NETDEV_10000
+config MDIO
+ tristate
+
config CHELSIO_T1
tristate "Chelsio 10Gb Ethernet support"
depends on PCI
select CRC32
+ select MDIO
help
This driver supports Chelsio gigabit and 10-gigabit
Ethernet cards. More information about adapter features and
tristate "Chelsio Communications T3 10Gb Ethernet support"
depends on CHELSIO_T3_DEPENDS
select FW_LOADER
+ select MDIO
help
This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
adapters.
config IXGBE
tristate "Intel(R) 10GbE PCI Express adapters support"
depends on PCI && INET
+ select MDIO
---help---
This driver supports Intel(R) 10GbE PCI Express family of
adapters. For more information on how to identify your adapter, go
config BNX2X
tristate "Broadcom NetXtremeII 10Gb support"
depends on PCI
+ select FW_LOADER
select ZLIB_INFLATE
select LIBCRC32C
help
source "drivers/atm/Kconfig"
+source "drivers/ieee802154/Kconfig"
+
source "drivers/s390/net/Kconfig"
config XEN_NETDEV_FRONTEND
git.openpandora.org / pandora-kernel.git / blobdiff