dbg_eba("erase LEB %d:%d, PEB %d", vol_id, lnum, pnum);
vol->eba_tbl[lnum] = UBI_LEB_UNMAPPED;
- err = ubi_wl_put_peb(ubi, pnum, 0);
+ err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 0);
out_unlock:
leb_write_unlock(ubi, vol_id, lnum);
*/
if (err == UBI_IO_BAD_HDR_EBADMSG ||
err == UBI_IO_BAD_HDR) {
- ubi_warn("corrupted VID header at PEB "
- "%d, LEB %d:%d", pnum, vol_id,
- lnum);
+ ubi_warn("corrupted VID header at PEB %d, LEB %d:%d",
+ pnum, vol_id, lnum);
err = -EBADMSG;
} else
ubi_ro_mode(ubi);
return -ENOMEM;
retry:
- new_pnum = ubi_wl_get_peb(ubi, UBI_UNKNOWN);
+ new_pnum = ubi_wl_get_peb(ubi);
if (new_pnum < 0) {
ubi_free_vid_hdr(ubi, vid_hdr);
return new_pnum;
data_size = offset + len;
mutex_lock(&ubi->buf_mutex);
- memset(ubi->peb_buf1 + offset, 0xFF, len);
+ memset(ubi->peb_buf + offset, 0xFF, len);
/* Read everything before the area where the write failure happened */
if (offset > 0) {
- err = ubi_io_read_data(ubi, ubi->peb_buf1, pnum, 0, offset);
+ err = ubi_io_read_data(ubi, ubi->peb_buf, pnum, 0, offset);
if (err && err != UBI_IO_BITFLIPS)
goto out_unlock;
}
- memcpy(ubi->peb_buf1 + offset, buf, len);
+ memcpy(ubi->peb_buf + offset, buf, len);
- err = ubi_io_write_data(ubi, ubi->peb_buf1, new_pnum, 0, data_size);
+ err = ubi_io_write_data(ubi, ubi->peb_buf, new_pnum, 0, data_size);
if (err) {
mutex_unlock(&ubi->buf_mutex);
goto write_error;
ubi_free_vid_hdr(ubi, vid_hdr);
vol->eba_tbl[lnum] = new_pnum;
- ubi_wl_put_peb(ubi, pnum, 1);
+ ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
ubi_msg("data was successfully recovered");
return 0;
out_unlock:
mutex_unlock(&ubi->buf_mutex);
out_put:
- ubi_wl_put_peb(ubi, new_pnum, 1);
+ ubi_wl_put_peb(ubi, vol_id, lnum, new_pnum, 1);
ubi_free_vid_hdr(ubi, vid_hdr);
return err;
* get another one.
*/
ubi_warn("failed to write to PEB %d", new_pnum);
- ubi_wl_put_peb(ubi, new_pnum, 1);
+ ubi_wl_put_peb(ubi, vol_id, lnum, new_pnum, 1);
if (++tries > UBI_IO_RETRIES) {
ubi_free_vid_hdr(ubi, vid_hdr);
return err;
* @buf: the data to write
* @offset: offset within the logical eraseblock where to write
* @len: how many bytes to write
- * @dtype: data type
*
* This function writes data to logical eraseblock @lnum of a dynamic volume
* @vol. Returns zero in case of success and a negative error code in case
* written to the flash media, but may be some garbage.
*/
int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
- const void *buf, int offset, int len, int dtype)
+ const void *buf, int offset, int len)
{
int err, pnum, tries = 0, vol_id = vol->vol_id;
struct ubi_vid_hdr *vid_hdr;
vid_hdr->data_pad = cpu_to_be32(vol->data_pad);
retry:
- pnum = ubi_wl_get_peb(ubi, dtype);
+ pnum = ubi_wl_get_peb(ubi);
if (pnum < 0) {
ubi_free_vid_hdr(ubi, vid_hdr);
leb_write_unlock(ubi, vol_id, lnum);
if (len) {
err = ubi_io_write_data(ubi, buf, pnum, offset, len);
if (err) {
- ubi_warn("failed to write %d bytes at offset %d of "
- "LEB %d:%d, PEB %d", len, offset, vol_id,
- lnum, pnum);
+ ubi_warn("failed to write %d bytes at offset %d of LEB %d:%d, PEB %d",
+ len, offset, vol_id, lnum, pnum);
goto write_error;
}
}
* eraseblock, so just put it and request a new one. We assume that if
* this physical eraseblock went bad, the erase code will handle that.
*/
- err = ubi_wl_put_peb(ubi, pnum, 1);
+ err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
if (err || ++tries > UBI_IO_RETRIES) {
ubi_ro_mode(ubi);
leb_write_unlock(ubi, vol_id, lnum);
* @lnum: logical eraseblock number
* @buf: data to write
* @len: how many bytes to write
- * @dtype: data type
* @used_ebs: how many logical eraseblocks will this volume contain
*
* This function writes data to logical eraseblock @lnum of static volume
* code in case of failure.
*/
int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
- int lnum, const void *buf, int len, int dtype,
- int used_ebs)
+ int lnum, const void *buf, int len, int used_ebs)
{
int err, pnum, tries = 0, data_size = len, vol_id = vol->vol_id;
struct ubi_vid_hdr *vid_hdr;
vid_hdr->data_crc = cpu_to_be32(crc);
retry:
- pnum = ubi_wl_get_peb(ubi, dtype);
+ pnum = ubi_wl_get_peb(ubi);
if (pnum < 0) {
ubi_free_vid_hdr(ubi, vid_hdr);
leb_write_unlock(ubi, vol_id, lnum);
return err;
}
- err = ubi_wl_put_peb(ubi, pnum, 1);
+ err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
if (err || ++tries > UBI_IO_RETRIES) {
ubi_ro_mode(ubi);
leb_write_unlock(ubi, vol_id, lnum);
* @lnum: logical eraseblock number
* @buf: data to write
* @len: how many bytes to write
- * @dtype: data type
*
* This function changes the contents of a logical eraseblock atomically. @buf
* has to contain new logical eraseblock data, and @len - the length of the
* LEB change may be done at a time. This is ensured by @ubi->alc_mutex.
*/
int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
- int lnum, const void *buf, int len, int dtype)
+ int lnum, const void *buf, int len)
{
int err, pnum, tries = 0, vol_id = vol->vol_id;
struct ubi_vid_hdr *vid_hdr;
err = ubi_eba_unmap_leb(ubi, vol, lnum);
if (err)
return err;
- return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0, dtype);
+ return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0);
}
vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
vid_hdr->data_crc = cpu_to_be32(crc);
retry:
- pnum = ubi_wl_get_peb(ubi, dtype);
+ pnum = ubi_wl_get_peb(ubi);
if (pnum < 0) {
err = pnum;
goto out_leb_unlock;
}
if (vol->eba_tbl[lnum] >= 0) {
- err = ubi_wl_put_peb(ubi, vol->eba_tbl[lnum], 0);
+ err = ubi_wl_put_peb(ubi, vol_id, lnum, vol->eba_tbl[lnum], 0);
if (err)
goto out_leb_unlock;
}
goto out_leb_unlock;
}
- err = ubi_wl_put_peb(ubi, pnum, 1);
+ err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
if (err || ++tries > UBI_IO_RETRIES) {
ubi_ro_mode(ubi);
goto out_leb_unlock;
* physical eraseblock @to. The @vid_hdr buffer may be changed by this
* function. Returns:
* o %0 in case of success;
- * o %MOVE_CANCEL_RACE, %MOVE_TARGET_WR_ERR, %MOVE_CANCEL_BITFLIPS, etc;
+ * o %MOVE_CANCEL_RACE, %MOVE_TARGET_WR_ERR, %MOVE_TARGET_BITFLIPS, etc;
* o a negative error code in case of failure.
*/
int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
* cancel it.
*/
if (vol->eba_tbl[lnum] != from) {
- dbg_wl("LEB %d:%d is no longer mapped to PEB %d, mapped to "
- "PEB %d, cancel", vol_id, lnum, from,
- vol->eba_tbl[lnum]);
+ dbg_wl("LEB %d:%d is no longer mapped to PEB %d, mapped to PEB %d, cancel",
+ vol_id, lnum, from, vol->eba_tbl[lnum]);
err = MOVE_CANCEL_RACE;
goto out_unlock_leb;
}
/*
* OK, now the LEB is locked and we can safely start moving it. Since
- * this function utilizes the @ubi->peb_buf1 buffer which is shared
+ * this function utilizes the @ubi->peb_buf buffer which is shared
* with some other functions - we lock the buffer by taking the
* @ubi->buf_mutex.
*/
mutex_lock(&ubi->buf_mutex);
dbg_wl("read %d bytes of data", aldata_size);
- err = ubi_io_read_data(ubi, ubi->peb_buf1, from, 0, aldata_size);
+ err = ubi_io_read_data(ubi, ubi->peb_buf, from, 0, aldata_size);
if (err && err != UBI_IO_BITFLIPS) {
ubi_warn("error %d while reading data from PEB %d",
err, from);
*/
if (vid_hdr->vol_type == UBI_VID_DYNAMIC)
aldata_size = data_size =
- ubi_calc_data_len(ubi, ubi->peb_buf1, data_size);
+ ubi_calc_data_len(ubi, ubi->peb_buf, data_size);
cond_resched();
- crc = crc32(UBI_CRC32_INIT, ubi->peb_buf1, data_size);
+ crc = crc32(UBI_CRC32_INIT, ubi->peb_buf, data_size);
cond_resched();
/*
err = ubi_io_read_vid_hdr(ubi, to, vid_hdr, 1);
if (err) {
if (err != UBI_IO_BITFLIPS) {
- ubi_warn("error %d while reading VID header back from "
- "PEB %d", err, to);
+ ubi_warn("error %d while reading VID header back from PEB %d",
+ err, to);
if (is_error_sane(err))
err = MOVE_TARGET_RD_ERR;
} else
- err = MOVE_CANCEL_BITFLIPS;
+ err = MOVE_TARGET_BITFLIPS;
goto out_unlock_buf;
}
if (data_size > 0) {
- err = ubi_io_write_data(ubi, ubi->peb_buf1, to, 0, aldata_size);
+ err = ubi_io_write_data(ubi, ubi->peb_buf, to, 0, aldata_size);
if (err) {
if (err == -EIO)
err = MOVE_TARGET_WR_ERR;
* We've written the data and are going to read it back to make
* sure it was written correctly.
*/
-
- err = ubi_io_read_data(ubi, ubi->peb_buf2, to, 0, aldata_size);
+ memset(ubi->peb_buf, 0xFF, aldata_size);
+ err = ubi_io_read_data(ubi, ubi->peb_buf, to, 0, aldata_size);
if (err) {
if (err != UBI_IO_BITFLIPS) {
- ubi_warn("error %d while reading data back "
- "from PEB %d", err, to);
+ ubi_warn("error %d while reading data back from PEB %d",
+ err, to);
if (is_error_sane(err))
err = MOVE_TARGET_RD_ERR;
} else
- err = MOVE_CANCEL_BITFLIPS;
+ err = MOVE_TARGET_BITFLIPS;
goto out_unlock_buf;
}
cond_resched();
- if (memcmp(ubi->peb_buf1, ubi->peb_buf2, aldata_size)) {
- ubi_warn("read data back from PEB %d and it is "
- "different", to);
+ if (crc != crc32(UBI_CRC32_INIT, ubi->peb_buf, data_size)) {
+ ubi_warn("read data back from PEB %d and it is different",
+ to);
err = -EINVAL;
goto out_unlock_buf;
}
* print_rsvd_warning - warn about not having enough reserved PEBs.
* @ubi: UBI device description object
*
- * This is a helper function for 'ubi_eba_init_scan()' which is called when UBI
+ * This is a helper function for 'ubi_eba_init()' which is called when UBI
* cannot reserve enough PEBs for bad block handling. This function makes a
* decision whether we have to print a warning or not. The algorithm is as
* follows:
* reported by real users.
*/
static void print_rsvd_warning(struct ubi_device *ubi,
- struct ubi_scan_info *si)
+ struct ubi_attach_info *ai)
{
/*
* The 1 << 18 (256KiB) number is picked randomly, just a reasonably
* large number to distinguish between newly flashed and used images.
*/
- if (si->max_sqnum > (1 << 18)) {
+ if (ai->max_sqnum > (1 << 18)) {
int min = ubi->beb_rsvd_level / 10;
if (!min)
return;
}
- ubi_warn("cannot reserve enough PEBs for bad PEB handling, reserved %d,"
- " need %d", ubi->beb_rsvd_pebs, ubi->beb_rsvd_level);
+ ubi_warn("cannot reserve enough PEBs for bad PEB handling, reserved %d, need %d",
+ ubi->beb_rsvd_pebs, ubi->beb_rsvd_level);
if (ubi->corr_peb_count)
ubi_warn("%d PEBs are corrupted and not used",
- ubi->corr_peb_count);
+ ubi->corr_peb_count);
}
/**
- * ubi_eba_init_scan - initialize the EBA sub-system using scanning information.
+ * ubi_eba_init - initialize the EBA sub-system using attaching information.
* @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
*
* This function returns zero in case of success and a negative error code in
* case of failure.
*/
-int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
+int ubi_eba_init(struct ubi_device *ubi, struct ubi_attach_info *ai)
{
int i, j, err, num_volumes;
- struct ubi_scan_volume *sv;
+ struct ubi_ainf_volume *av;
struct ubi_volume *vol;
- struct ubi_scan_leb *seb;
+ struct ubi_ainf_peb *aeb;
struct rb_node *rb;
dbg_eba("initialize EBA sub-system");
mutex_init(&ubi->alc_mutex);
ubi->ltree = RB_ROOT;
- ubi->global_sqnum = si->max_sqnum + 1;
+ ubi->global_sqnum = ai->max_sqnum + 1;
num_volumes = ubi->vtbl_slots + UBI_INT_VOL_COUNT;
for (i = 0; i < num_volumes; i++) {
for (j = 0; j < vol->reserved_pebs; j++)
vol->eba_tbl[j] = UBI_LEB_UNMAPPED;
- sv = ubi_scan_find_sv(si, idx2vol_id(ubi, i));
- if (!sv)
+ av = ubi_find_av(ai, idx2vol_id(ubi, i));
+ if (!av)
continue;
- ubi_rb_for_each_entry(rb, seb, &sv->root, u.rb) {
- if (seb->lnum >= vol->reserved_pebs)
+ ubi_rb_for_each_entry(rb, aeb, &av->root, u.rb) {
+ if (aeb->lnum >= vol->reserved_pebs)
/*
* This may happen in case of an unclean reboot
* during re-size.
*/
- ubi_scan_move_to_list(sv, seb, &si->erase);
+ ubi_move_aeb_to_list(av, aeb, &ai->erase);
else
- vol->eba_tbl[seb->lnum] = seb->pnum;
+ vol->eba_tbl[aeb->lnum] = aeb->pnum;
}
}
if (ubi->avail_pebs < ubi->beb_rsvd_level) {
/* No enough free physical eraseblocks */
ubi->beb_rsvd_pebs = ubi->avail_pebs;
- print_rsvd_warning(ubi, si);
+ print_rsvd_warning(ubi, ai);
} else
ubi->beb_rsvd_pebs = ubi->beb_rsvd_level;
git.openpandora.org / pandora-kernel.git / blobdiff