mmc: sdhci: add eMMC hardware reset support

[pandora-kernel.git] / drivers / mmc / host / sdhci.c

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 89ba451..d66a7a1 100644 (file)
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1471,6 +1471,14 @@ static int sdhci_get_ro(struct mmc_host *mmc)
        return 0;
 }
 
+static void sdhci_hw_reset(struct mmc_host *mmc)
+{
+       struct sdhci_host *host = mmc_priv(mmc);
+
+       if (host->ops && host->ops->hw_reset)
+               host->ops->hw_reset(host);
+}
+
 static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
 {
        struct sdhci_host *host;
@@ -1805,6 +1813,7 @@ static const struct mmc_host_ops sdhci_ops = {
        .request        = sdhci_request,
        .set_ios        = sdhci_set_ios,
        .get_ro         = sdhci_get_ro,
+       .hw_reset       = sdhci_hw_reset,
        .enable_sdio_irq = sdhci_enable_sdio_irq,
        .start_signal_voltage_switch    = sdhci_start_signal_voltage_switch,
        .execute_tuning                 = sdhci_execute_tuning,
@@ -2456,25 +2465,6 @@ int sdhci_add_host(struct sdhci_host *host)
                host->max_clk = host->ops->get_max_clock(host);
        }
 
-       host->timeout_clk =
-               (caps[0] & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
-       if (host->timeout_clk == 0) {
-               if (host->ops->get_timeout_clock) {
-                       host->timeout_clk = host->ops->get_timeout_clock(host);
-               } else if (!(host->quirks &
-                               SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
-                       printk(KERN_ERR
-                              "%s: Hardware doesn't specify timeout clock "
-                              "frequency.\n", mmc_hostname(mmc));
-                       return -ENODEV;
-               }
-       }
-       if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
-               host->timeout_clk *= 1000;
-
-       if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
-               host->timeout_clk = host->clock / 1000;
-
        /*
         * In case of Host Controller v3.00, find out whether clock
         * multiplier is supported.
@@ -2507,10 +2497,26 @@ int sdhci_add_host(struct sdhci_host *host)
        } else
                mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
 
+       host->timeout_clk =
+               (caps[0] & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
+       if (host->timeout_clk == 0) {
+               if (host->ops->get_timeout_clock) {
+                       host->timeout_clk = host->ops->get_timeout_clock(host);
+               } else if (!(host->quirks &
+                               SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
+                       printk(KERN_ERR
+                              "%s: Hardware doesn't specify timeout clock "
+                              "frequency.\n", mmc_hostname(mmc));
+                       return -ENODEV;
+               }
+       }
+       if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
+               host->timeout_clk *= 1000;
+
        if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
-               mmc->max_discard_to = (1 << 27) / (mmc->f_max / 1000);
-       else
-               mmc->max_discard_to = (1 << 27) / host->timeout_clk;
+               host->timeout_clk = mmc->f_max / 1000;
+
+       mmc->max_discard_to = (1 << 27) / host->timeout_clk;
 
        mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;