#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/i2c.h>
-#include <linux/version.h>
#include <asm/div64.h>
#include "dvb_frontend.h"
#define DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH (0x03)
#endif
-#ifndef DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH
-#define DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH (0x06)
-#endif
-
#define DEFAULT_DRXK_MPEG_LOCK_TIMEOUT 700
#define DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT 500
u32 ulQual83 = DEFAULT_MER_83;
u32 ulQual93 = DEFAULT_MER_93;
- u32 ulDVBTStaticTSClock = 1;
- u32 ulDVBCStaticTSClock = 1;
-
u32 ulMpegLockTimeOut = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT;
u32 ulDemodLockTimeOut = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT;
u32 ulGPIOCfg = 0x0113;
u32 ulInvertTSClock = 0;
u32 ulTSDataStrength = DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH;
- u32 ulTSClockkStrength = DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH;
u32 ulDVBTBitrate = 50000000;
u32 ulDVBCBitrate = DRXK_QAM_SYMBOLRATE_MAX * 8;
state->m_invertSTR = false; /* If TRUE; invert STR signals */
state->m_invertVAL = false; /* If TRUE; invert VAL signals */
state->m_invertCLK = (ulInvertTSClock != 0); /* If TRUE; invert CLK signals */
- state->m_DVBTStaticCLK = (ulDVBTStaticTSClock != 0);
- state->m_DVBCStaticCLK = (ulDVBCStaticTSClock != 0);
+
/* If TRUE; static MPEG clockrate will be used;
otherwise clockrate will adapt to the bitrate of the TS */
state->m_DVBCBitrate = ulDVBCBitrate;
state->m_TSDataStrength = (ulTSDataStrength & 0x07);
- state->m_TSClockkStrength = (ulTSClockkStrength & 0x07);
/* Maximum bitrate in b/s in case static clockrate is selected */
state->m_mpegTsStaticBitrate = 19392658;
int status = -1;
u16 sioPdrMclkCfg = 0;
u16 sioPdrMdxCfg = 0;
+ u16 err_cfg = 0;
dprintk(1, ": mpeg %s, %s mode\n",
mpegEnable ? "enable" : "disable",
status = write16(state, SIO_PDR_MSTRT_CFG__A, sioPdrMdxCfg);
if (status < 0)
goto error;
- status = write16(state, SIO_PDR_MERR_CFG__A, 0x0000); /* Disable */
+
+ if (state->enable_merr_cfg)
+ err_cfg = sioPdrMdxCfg;
+
+ status = write16(state, SIO_PDR_MERR_CFG__A, err_cfg);
if (status < 0)
goto error;
- status = write16(state, SIO_PDR_MVAL_CFG__A, 0x0000); /* Disable */
+ status = write16(state, SIO_PDR_MVAL_CFG__A, err_cfg);
if (status < 0)
goto error;
+
if (state->m_enableParallel == true) {
/* paralel -> enable MD1 to MD7 */
status = write16(state, SIO_PDR_MD1_CFG__A, sioPdrMdxCfg);
dprintk(1, "\n");
if ((cmd == 0) || ((parameterLen > 0) && (parameter == NULL)) ||
- ((resultLen > 0) && (result == NULL)))
- goto error;
+ ((resultLen > 0) && (result == NULL))) {
+ printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+ return status;
+ }
mutex_lock(&state->mutex);
if (status < 0)
goto error;
- if (!state->microcode_name)
- load_microcode(state, "drxk_a3.mc");
- else
+ if (state->microcode_name)
load_microcode(state, state->microcode_name);
/* disable token-ring bus through OFDM block for possible ucode upload */
switch (p->delivery_system) {
case SYS_DVBC_ANNEX_A:
case SYS_DVBC_ANNEX_C:
+ case SYS_DVBT:
sets->min_delay_ms = 3000;
sets->max_drift = 0;
sets->step_size = 0;
return 0;
default:
- /*
- * For DVB-T, let it use the default DVB core way, that is:
- * fepriv->step_size = fe->ops.info.frequency_stepsize * 2
- */
return -EINVAL;
}
}
state->antenna_gpio = config->antenna_gpio;
state->antenna_dvbt = config->antenna_dvbt;
state->m_ChunkSize = config->chunk_size;
+ state->enable_merr_cfg = config->enable_merr_cfg;
+
+ if (config->dynamic_clk) {
+ state->m_DVBTStaticCLK = 0;
+ state->m_DVBCStaticCLK = 0;
+ } else {
+ state->m_DVBTStaticCLK = 1;
+ state->m_DVBCStaticCLK = 1;
+ }
+
+
+ if (config->mpeg_out_clk_strength)
+ state->m_TSClockkStrength = config->mpeg_out_clk_strength & 0x07;
+ else
+ state->m_TSClockkStrength = 0x06;
if (config->parallel_ts)
state->m_enableParallel = true;