* LME2510: SHARP:BS2F7HZ0194(MV0194) cannot cold reset and share system
* with other tuners. After a cold reset streaming will not start.
*
- * PID functions have been removed from this driver version due to
- * problems with different firmware and application versions.
*/
#define DVB_USB_LOG_PREFIX "LME2510(C)"
#include <linux/usb.h>
module_param_named(firmware, dvb_usb_lme2510_firmware, int, 0644);
MODULE_PARM_DESC(firmware, "set default firmware 0=Sharp7395 1=LG");
+static int pid_filter;
+module_param_named(pid, pid_filter, int, 0644);
+MODULE_PARM_DESC(pid, "set default 0=on 1=off");
+
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
u8 i2c_tuner_gate_r;
u8 i2c_tuner_addr;
u8 stream_on;
+ u8 pid_size;
void *buffer;
struct urb *lme_urb;
void *usb_buffer;
}
buff = st->usb_buffer;
- /* the read/write capped at 512 */
- memcpy(buff, wbuf, (wlen > 512) ? 512 : wlen);
-
ret = mutex_lock_interruptible(&d->usb_mutex);
if (ret < 0)
return -EAGAIN;
+ /* the read/write capped at 512 */
+ memcpy(buff, wbuf, (wlen > 512) ? 512 : wlen);
+
ret |= usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, 0x01));
ret |= lme2510_bulk_write(d->udev, buff, wlen , 0x01);
rbuff, sizeof(rbuff));
return ret;
}
-static int lme2510_remote_keypress(struct dvb_usb_adapter *adap, u32 keypress)
+
+static int lme2510_enable_pid(struct dvb_usb_device *d, u8 index, u16 pid_out)
{
- struct dvb_usb_device *d = adap->dev;
+ struct lme2510_state *st = d->priv;
+ static u8 pid_buff[] = LME_ZERO_PID;
+ static u8 rbuf[1];
+ u8 pid_no = index * 2;
+ u8 pid_len = pid_no + 2;
+ int ret = 0;
+ deb_info(1, "PID Setting Pid %04x", pid_out);
- deb_info(1, "INT Key Keypress =%04x", keypress);
+ if (st->pid_size == 0)
+ ret |= lme2510_stream_restart(d);
- if (keypress > 0)
- rc_keydown(d->rc_dev, keypress, 0);
+ pid_buff[2] = pid_no;
+ pid_buff[3] = (u8)pid_out & 0xff;
+ pid_buff[4] = pid_no + 1;
+ pid_buff[5] = (u8)(pid_out >> 8);
- return 0;
+ if (pid_len > st->pid_size)
+ st->pid_size = pid_len;
+ pid_buff[7] = 0x80 + st->pid_size;
+
+ ret |= lme2510_usb_talk(d, pid_buff ,
+ sizeof(pid_buff) , rbuf, sizeof(rbuf));
+
+ if (st->stream_on)
+ ret |= lme2510_stream_restart(d);
+
+ return ret;
}
static void lme2510_int_response(struct urb *lme_urb)
struct lme2510_state *st = adap->dev->priv;
static u8 *ibuf, *rbuf;
int i = 0, offset;
+ u32 key;
switch (lme_urb->status) {
case 0:
switch (ibuf[0]) {
case 0xaa:
- debug_data_snipet(1, "INT Remote data snipet in", ibuf);
- lme2510_remote_keypress(adap,
- (u32)(ibuf[2] << 24) + (ibuf[3] << 16) +
- (ibuf[4] << 8) + ibuf[5]);
+ debug_data_snipet(1, "INT Remote data snipet", ibuf);
+ if ((ibuf[4] + ibuf[5]) == 0xff) {
+ key = ibuf[5];
+ key += (ibuf[3] > 0)
+ ? (ibuf[3] ^ 0xff) << 8 : 0;
+ key += (ibuf[2] ^ 0xff) << 16;
+ deb_info(1, "INT Key =%08x", key);
+ if (adap->dev->rc_dev != NULL)
+ rc_keydown(adap->dev->rc_dev, key, 0);
+ }
break;
case 0xbb:
switch (st->tuner_config) {
return 0;
}
+static int lme2510_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+ struct lme2510_state *st = adap->dev->priv;
+ static u8 clear_pid_reg[] = LME_CLEAR_PID;
+ static u8 rbuf[1];
+ int ret;
+
+ deb_info(1, "PID Clearing Filter");
+
+ ret = mutex_lock_interruptible(&adap->dev->i2c_mutex);
+ if (ret < 0)
+ return -EAGAIN;
+
+ if (!onoff)
+ ret |= lme2510_usb_talk(adap->dev, clear_pid_reg,
+ sizeof(clear_pid_reg), rbuf, sizeof(rbuf));
+
+ st->pid_size = 0;
+
+ mutex_unlock(&adap->dev->i2c_mutex);
+
+ return 0;
+}
+
+static int lme2510_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
+ int onoff)
+{
+ int ret = 0;
+
+ deb_info(3, "%s PID=%04x Index=%04x onoff=%02x", __func__,
+ pid, index, onoff);
+
+ if (onoff)
+ if (!pid_filter) {
+ ret = mutex_lock_interruptible(&adap->dev->i2c_mutex);
+ if (ret < 0)
+ return -EAGAIN;
+ ret |= lme2510_enable_pid(adap->dev, index, pid);
+ mutex_unlock(&adap->dev->i2c_mutex);
+ }
+
+
+ return ret;
+}
+
+
static int lme2510_return_status(struct usb_device *dev)
{
int ret = 0;
- u8 data[10] = {0};
+ u8 *data;
+
+ data = kzalloc(10, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
ret |= usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
0x06, 0x80, 0x0302, 0x00, data, 0x0006, 200);
info("Firmware Status: %x (%x)", ret , data[2]);
- return (ret < 0) ? -ENODEV : data[2];
+ ret = (ret < 0) ? -ENODEV : data[2];
+ kfree(data);
+ return ret;
}
static int lme2510_msg(struct dvb_usb_device *d,
else {
deb_info(1, "STM Steam Off");
/* mutex is here only to avoid collision with I2C */
- ret = mutex_lock_interruptible(&adap->dev->i2c_mutex);
+ if (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0)
+ return -EAGAIN;
- ret |= lme2510_usb_talk(adap->dev, clear_reg_3,
+ ret = lme2510_usb_talk(adap->dev, clear_reg_3,
sizeof(clear_reg_3), rbuf, rlen);
st->stream_on = 0;
st->i2c_talk_onoff = 1;
return (ret < 0) ? -ENODEV : 0;
}
-static int lme2510_int_service(struct dvb_usb_adapter *adap)
-{
- struct dvb_usb_device *d = adap->dev;
- struct rc_dev *rc;
- int ret;
-
- info("STA Configuring Remote");
-
- rc = rc_allocate_device();
- if (!rc)
- return -ENOMEM;
-
- usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
- strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
-
- rc->input_name = "LME2510 Remote Control";
- rc->input_phys = d->rc_phys;
- rc->map_name = RC_MAP_LME2510;
- rc->driver_name = "LME 2510";
- usb_to_input_id(d->udev, &rc->input_id);
-
- ret = rc_register_device(rc);
- if (ret) {
- rc_free_device(rc);
- return ret;
- }
- d->rc_dev = rc;
-
- /* Start the Interrupt */
- ret = lme2510_int_read(adap);
- if (ret < 0) {
- rc_unregister_device(rc);
- info("INT Unable to start Interrupt Service");
- return -ENODEV;
- }
-
- return 0;
-}
-
static u8 check_sum(u8 *p, u8 len)
{
u8 sum = 0;
const struct firmware *fw)
{
int ret = 0;
- u8 data[512] = {0};
+ u8 *data;
u16 j, wlen, len_in, start, end;
u8 packet_size, dlen, i;
u8 *fw_data;
packet_size = 0x31;
len_in = 1;
+ data = kzalloc(512, GFP_KERNEL);
+ if (!data) {
+ info("FRM Could not start Firmware Download (Buffer allocation failed)");
+ return -ENOMEM;
+ }
info("FRM Starting Firmware Download");
data[0] = i | 0x80;
dlen = (u8)(end - j)-1;
}
- data[1] = dlen;
- memcpy(&data[2], fw_data, dlen+1);
- wlen = (u8) dlen + 4;
- data[wlen-1] = check_sum(fw_data, dlen+1);
- deb_info(1, "Data S=%02x:E=%02x CS= %02x", data[3],
+ data[1] = dlen;
+ memcpy(&data[2], fw_data, dlen+1);
+ wlen = (u8) dlen + 4;
+ data[wlen-1] = check_sum(fw_data, dlen+1);
+ deb_info(1, "Data S=%02x:E=%02x CS= %02x", data[3],
data[dlen+2], data[dlen+3]);
- ret |= lme2510_bulk_write(dev, data, wlen, 1);
- ret |= lme2510_bulk_read(dev, data, len_in , 1);
- ret |= (data[0] == 0x88) ? 0 : -1;
+ ret |= lme2510_bulk_write(dev, data, wlen, 1);
+ ret |= lme2510_bulk_read(dev, data, len_in , 1);
+ ret |= (data[0] == 0x88) ? 0 : -1;
}
}
else
info("FRM Firmware Download Completed - Resetting Device");
-
+ kfree(data);
return (ret < 0) ? -ENODEV : 0;
}
cold_fw = !cold;
- if (udev->descriptor.idProduct == 0x1122) {
+ if (le16_to_cpu(udev->descriptor.idProduct) == 0x1122) {
switch (dvb_usb_lme2510_firmware) {
default:
dvb_usb_lme2510_firmware = TUNER_S0194;
fw_lme = fw_s0194;
ret = request_firmware(&fw, fw_lme, &udev->dev);
if (ret == 0) {
- cold = 0;/*lme2510-s0194 cannot cold reset*/
+ cold = 0;
break;
}
dvb_usb_lme2510_firmware = TUNER_LG;
case TUNER_S7395:
fw_lme = fw_c_s7395;
ret = request_firmware(&fw, fw_lme, &udev->dev);
- if (ret == 0)
+ if (ret == 0) {
+ cold = 0;
break;
+ }
dvb_usb_lme2510_firmware = TUNER_LG;
case TUNER_LG:
fw_lme = fw_c_lg;
ret = lme2510_download_firmware(udev, fw);
}
+ release_firmware(fw);
+
if (cold) {
info("FRM Changing to %s firmware", fw_lme);
lme_coldreset(udev);
return -ENODEV;
}
- release_firmware(fw);
-
return ret;
}
end: if (ret) {
- kfree(adap->fe);
- adap->fe = NULL;
+ if (adap->fe) {
+ dvb_frontend_detach(adap->fe);
+ adap->fe = NULL;
+ }
+ adap->dev->props.rc.core.rc_codes = NULL;
return -ENODEV;
}
return -ENODEV;
}
- /* Start the Interrupt & Remote*/
- ret = lme2510_int_service(adap);
+ /* Start the Interrupt*/
+ ret = lme2510_int_read(adap);
+ if (ret < 0) {
+ info("INT Unable to start Interrupt Service");
+ return -ENODEV;
+ }
return ret;
}
static u8 rbuf[1];
int ret, len = 3, rlen = 1;
- ret = mutex_lock_interruptible(&d->i2c_mutex);
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
if (onoff)
- ret |= lme2510_usb_talk(d, lnb_on, len, rbuf, rlen);
+ ret = lme2510_usb_talk(d, lnb_on, len, rbuf, rlen);
else
- ret |= lme2510_usb_talk(d, lnb_off, len, rbuf, rlen);
+ ret = lme2510_usb_talk(d, lnb_off, len, rbuf, rlen);
st->i2c_talk_onoff = 1;
.num_adapters = 1,
.adapter = {
{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER|
+ DVB_USB_ADAP_NEED_PID_FILTERING|
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.streaming_ctrl = lme2510_streaming_ctrl,
+ .pid_filter_count = 15,
+ .pid_filter = lme2510_pid_filter,
+ .pid_filter_ctrl = lme2510_pid_filter_ctrl,
.frontend_attach = dm04_lme2510_frontend_attach,
.tuner_attach = dm04_lme2510_tuner,
/* parameter for the MPEG2-data transfer */
}
}
},
+ .rc.core = {
+ .protocol = RC_TYPE_NEC,
+ .module_name = "LME2510 Remote Control",
+ .allowed_protos = RC_TYPE_NEC,
+ .rc_codes = RC_MAP_LME2510,
+ },
.power_ctrl = lme2510_powerup,
.identify_state = lme2510_identify_state,
.i2c_algo = &lme2510_i2c_algo,
.num_adapters = 1,
.adapter = {
{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER|
+ DVB_USB_ADAP_NEED_PID_FILTERING|
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.streaming_ctrl = lme2510_streaming_ctrl,
+ .pid_filter_count = 15,
+ .pid_filter = lme2510_pid_filter,
+ .pid_filter_ctrl = lme2510_pid_filter_ctrl,
.frontend_attach = dm04_lme2510_frontend_attach,
.tuner_attach = dm04_lme2510_tuner,
/* parameter for the MPEG2-data transfer */
}
}
},
+ .rc.core = {
+ .protocol = RC_TYPE_NEC,
+ .module_name = "LME2510 Remote Control",
+ .allowed_protos = RC_TYPE_NEC,
+ .rc_codes = RC_MAP_LME2510,
+ },
.power_ctrl = lme2510_powerup,
.identify_state = lme2510_identify_state,
.i2c_algo = &lme2510_i2c_algo,
}
};
-void *lme2510_exit_int(struct dvb_usb_device *d)
+static void *lme2510_exit_int(struct dvb_usb_device *d)
{
struct lme2510_state *st = d->priv;
struct dvb_usb_adapter *adap = &d->adapter[0];
adap->feedcount = 0;
}
- if (st->lme_urb != NULL) {
+ if (st->usb_buffer != NULL) {
st->i2c_talk_onoff = 1;
st->signal_lock = 0;
st->signal_level = 0;
st->signal_sn = 0;
buffer = st->usb_buffer;
+ }
+
+ if (st->lme_urb != NULL) {
usb_kill_urb(st->lme_urb);
usb_free_coherent(d->udev, 5000, st->buffer,
st->lme_urb->transfer_dma);
info("Interrupt Service Stopped");
- rc_unregister_device(d->rc_dev);
- info("Remote Stopped");
}
+
return buffer;
}
-void lme2510_exit(struct usb_interface *intf)
+static void lme2510_exit(struct usb_interface *intf)
{
struct dvb_usb_device *d = usb_get_intfdata(intf);
void *usb_buffer;
if (d != NULL) {
usb_buffer = lme2510_exit_int(d);
dvb_usb_device_exit(intf);
- kfree(usb_buffer);
+ if (usb_buffer != NULL)
+ kfree(usb_buffer);
}
}
MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
MODULE_DESCRIPTION("LME2510(C) DVB-S USB2.0");
-MODULE_VERSION("1.80");
+MODULE_VERSION("1.88");
MODULE_LICENSE("GPL");
git.openpandora.org / pandora-kernel.git / blobdiff