Input: elantech - report multitouch with proper ABS_MT messages
[pandora-kernel.git] / drivers / input / mouse / elantech.c
index 04d9bf3..32648b3 100644 (file)
@@ -16,6 +16,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/input.h>
+#include <linux/input/mt.h>
 #include <linux/serio.h>
 #include <linux/libps2.h>
 #include "psmouse.h"
@@ -242,15 +243,37 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
        input_sync(dev);
 }
 
+static void elantech_set_slot(struct input_dev *dev, int slot, bool active,
+                             unsigned int x, unsigned int y)
+{
+       input_mt_slot(dev, slot);
+       input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
+       if (active) {
+               input_report_abs(dev, ABS_MT_POSITION_X, x);
+               input_report_abs(dev, ABS_MT_POSITION_Y, y);
+       }
+}
+
+/* x1 < x2 and y1 < y2 when two fingers, x = y = 0 when not pressed */
+static void elantech_report_semi_mt_data(struct input_dev *dev,
+                                        unsigned int num_fingers,
+                                        unsigned int x1, unsigned int y1,
+                                        unsigned int x2, unsigned int y2)
+{
+       elantech_set_slot(dev, 0, num_fingers != 0, x1, y1);
+       elantech_set_slot(dev, 1, num_fingers == 2, x2, y2);
+}
+
 /*
  * Interpret complete data packets and report absolute mode input events for
  * hardware version 2. (6 byte packets)
  */
 static void elantech_report_absolute_v2(struct psmouse *psmouse)
 {
+       struct elantech_data *etd = psmouse->private;
        struct input_dev *dev = psmouse->dev;
        unsigned char *packet = psmouse->packet;
-       int fingers, x1, y1, x2, y2;
+       unsigned int fingers, x1 = 0, y1 = 0, x2 = 0, y2 = 0, width = 0, pres = 0;
 
        /* byte 0: n1  n0   .   .   .   .   R   L */
        fingers = (packet[0] & 0xc0) >> 6;
@@ -270,14 +293,18 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
                 * byte 1:  .   .   .   .   .  x10 x9  x8
                 * byte 2: x7  x6  x5  x4  x4  x2  x1  x0
                 */
-               input_report_abs(dev, ABS_X,
-                       ((packet[1] & 0x07) << 8) | packet[2]);
+               x1 = ((packet[1] & 0x07) << 8) | packet[2];
                /*
                 * byte 4:  .   .   .   .   .   .  y9  y8
                 * byte 5: y7  y6  y5  y4  y3  y2  y1  y0
                 */
-               input_report_abs(dev, ABS_Y,
-                       ETP_YMAX_V2 - (((packet[4] & 0x03) << 8) | packet[5]));
+               y1 = ETP_YMAX_V2 - (((packet[4] & 0x03) << 8) | packet[5]);
+
+               input_report_abs(dev, ABS_X, x1);
+               input_report_abs(dev, ABS_Y, y1);
+
+               pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
+               width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
                break;
 
        case 2:
@@ -311,15 +338,24 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
                input_report_abs(dev, ABS_HAT0Y, y1);
                input_report_abs(dev, ABS_HAT1X, x2);
                input_report_abs(dev, ABS_HAT1Y, y2);
+
+               /* Unknown so just report sensible values */
+               pres = 127;
+               width = 7;
                break;
        }
 
+       elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
        input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
        input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
        input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
        input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4);
        input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
        input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+       if (etd->reports_pressure) {
+               input_report_abs(dev, ABS_PRESSURE, pres);
+               input_report_abs(dev, ABS_TOOL_WIDTH, width);
+       }
 
        input_sync(dev);
 }
@@ -478,6 +514,16 @@ static void elantech_set_input_params(struct psmouse *psmouse)
                __set_bit(BTN_TOOL_QUADTAP, dev->keybit);
                input_set_abs_params(dev, ABS_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0);
                input_set_abs_params(dev, ABS_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0);
+               if (etd->reports_pressure) {
+                       input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
+                                            ETP_PMAX_V2, 0, 0);
+                       input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
+                                            ETP_WMAX_V2, 0, 0);
+               }
+               __set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
+               input_mt_init_slots(dev, 2);
+               input_set_abs_params(dev, ABS_MT_POSITION_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0);
+               input_set_abs_params(dev, ABS_MT_POSITION_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0);
                input_set_abs_params(dev, ABS_HAT0X, ETP_2FT_XMIN, ETP_2FT_XMAX, 0, 0);
                input_set_abs_params(dev, ABS_HAT0Y, ETP_2FT_YMIN, ETP_2FT_YMAX, 0, 0);
                input_set_abs_params(dev, ABS_HAT1X, ETP_2FT_XMIN, ETP_2FT_XMAX, 0, 0);
@@ -725,6 +771,10 @@ int elantech_init(struct psmouse *psmouse)
                etd->debug = 1;
                /* Don't know how to do parity checking for version 2 */
                etd->paritycheck = 0;
+
+               if (etd->fw_version >= 0x020800)
+                       etd->reports_pressure = true;
+
        } else {
                etd->hw_version = 1;
                etd->paritycheck = 1;