#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/major.h>
#include <linux/errno.h>
#include <linux/genhd.h>
-#include <linux/blkpg.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/pci.h>
-#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/completion.h>
-#include <linux/reboot.h>
-#include <linux/cdrom.h>
-#include <linux/seq_file.h>
#include <linux/device.h>
-#include <linux/bitops.h>
-
-#include <asm/byteorder.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
/* default maximum number of failures */
IDE6_MAJOR, IDE7_MAJOR,
IDE8_MAJOR, IDE9_MAJOR };
-static int idebus_parameter; /* holds the "idebus=" parameter */
-static int system_bus_speed; /* holds what we think is VESA/PCI bus speed */
-
DEFINE_MUTEX(ide_cfg_mtx);
- __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock);
-int noautodma = 0;
-
-ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */
+__cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock);
+EXPORT_SYMBOL(ide_lock);
static void ide_port_init_devices_data(ide_hwif_t *);
ide_port_init_devices_data(hwif);
}
-EXPORT_SYMBOL_GPL(ide_init_port_data);
static void ide_port_init_devices_data(ide_hwif_t *hwif)
{
drive->media = ide_disk;
drive->select.all = (unit<<4)|0xa0;
drive->hwif = hwif;
- drive->ctl = 0x08;
drive->ready_stat = READY_STAT;
drive->bad_wstat = BAD_W_STAT;
drive->special.b.recalibrate = 1;
}
}
-/*
- * init_ide_data() sets reasonable default values into all fields
- * of all instances of the hwifs and drives, but only on the first call.
- * Subsequent calls have no effect (they don't wipe out anything).
- *
- * This routine is normally called at driver initialization time,
- * but may also be called MUCH earlier during kernel "command-line"
- * parameter processing. As such, we cannot depend on any other parts
- * of the kernel (such as memory allocation) to be functioning yet.
- *
- * This is too bad, as otherwise we could dynamically allocate the
- * ide_drive_t structs as needed, rather than always consuming memory
- * for the max possible number (MAX_HWIFS * MAX_DRIVES) of them.
- *
- * FIXME: We should stuff the setup data into __init and copy the
- * relevant hwifs/allocate them properly during boot.
- */
-#define MAGIC_COOKIE 0x12345678
-static void __init init_ide_data (void)
-{
- unsigned int index;
- static unsigned long magic_cookie = MAGIC_COOKIE;
-
- if (magic_cookie != MAGIC_COOKIE)
- return; /* already initialized */
- magic_cookie = 0;
-
- /* Initialise all interface structures */
- for (index = 0; index < MAX_HWIFS; ++index) {
- ide_hwif_t *hwif = &ide_hwifs[index];
-
- ide_init_port_data(hwif, index);
- }
-}
-
-/**
- * ide_system_bus_speed - guess bus speed
- *
- * ide_system_bus_speed() returns what we think is the system VESA/PCI
- * bus speed (in MHz). This is used for calculating interface PIO timings.
- * The default is 40 for known PCI systems, 50 otherwise.
- * The "idebus=xx" parameter can be used to override this value.
- * The actual value to be used is computed/displayed the first time
- * through. Drivers should only use this as a last resort.
- *
- * Returns a guessed speed in MHz.
- */
-
-static int ide_system_bus_speed(void)
-{
-#ifdef CONFIG_PCI
- static struct pci_device_id pci_default[] = {
- { PCI_DEVICE(PCI_ANY_ID, PCI_ANY_ID) },
- { }
- };
-#else
-#define pci_default 0
-#endif /* CONFIG_PCI */
-
- /* user supplied value */
- if (idebus_parameter)
- return idebus_parameter;
-
- /* safe default value for PCI or VESA and PCI*/
- return pci_dev_present(pci_default) ? 33 : 50;
-}
-
void ide_remove_port_from_hwgroup(ide_hwif_t *hwif)
{
ide_hwgroup_t *hwgroup = hwif->hwgroup;
memcpy(&hwif->io_ports, &hw->io_ports, sizeof(hwif->io_ports));
hwif->irq = hw->irq;
hwif->chipset = hw->chipset;
- hwif->gendev.parent = hw->dev;
+ hwif->dev = hw->dev;
+ hwif->gendev.parent = hw->parent ? hw->parent : hw->dev;
hwif->ack_intr = hw->ack_intr;
}
EXPORT_SYMBOL_GPL(ide_init_port_hw);
int set_pio_mode(ide_drive_t *drive, int arg)
{
- struct request rq;
+ struct request *rq;
ide_hwif_t *hwif = drive->hwif;
const struct ide_port_ops *port_ops = hwif->port_ops;
if (drive->special.b.set_tune)
return -EBUSY;
- ide_init_drive_cmd(&rq);
- rq.cmd_type = REQ_TYPE_ATA_TASKFILE;
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
drive->tune_req = (u8) arg;
drive->special.b.set_tune = 1;
- (void) ide_do_drive_cmd(drive, &rq, ide_wait);
+
+ blk_execute_rq(drive->queue, NULL, rq, 0);
+ blk_put_request(rq);
+
return 0;
}
return 0;
}
-/**
- * system_bus_clock - clock guess
- *
- * External version of the bus clock guess used by very old IDE drivers
- * for things like VLB timings. Should not be used.
- */
-
-int system_bus_clock (void)
-{
- return system_bus_speed;
-}
-
-EXPORT_SYMBOL(system_bus_clock);
-
static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
{
ide_drive_t *drive = dev->driver_data;
ide_hwif_t *hwif = HWIF(drive);
- struct request rq;
+ struct request *rq;
struct request_pm_state rqpm;
ide_task_t args;
int ret;
if (!(drive->dn % 2))
ide_acpi_get_timing(hwif);
- blk_rq_init(NULL, &rq);
memset(&rqpm, 0, sizeof(rqpm));
memset(&args, 0, sizeof(args));
- rq.cmd_type = REQ_TYPE_PM_SUSPEND;
- rq.special = &args;
- rq.data = &rqpm;
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_PM_SUSPEND;
+ rq->special = &args;
+ rq->data = &rqpm;
rqpm.pm_step = ide_pm_state_start_suspend;
if (mesg.event == PM_EVENT_PRETHAW)
mesg.event = PM_EVENT_FREEZE;
rqpm.pm_state = mesg.event;
- ret = ide_do_drive_cmd(drive, &rq, ide_wait);
+ ret = blk_execute_rq(drive->queue, NULL, rq, 0);
+ blk_put_request(rq);
/* only call ACPI _PS3 after both drivers are suspended */
if (!ret && (((drive->dn % 2) && hwif->drives[0].present
&& hwif->drives[1].present)
{
ide_drive_t *drive = dev->driver_data;
ide_hwif_t *hwif = HWIF(drive);
- struct request rq;
+ struct request *rq;
struct request_pm_state rqpm;
ide_task_t args;
int err;
ide_acpi_exec_tfs(drive);
- blk_rq_init(NULL, &rq);
memset(&rqpm, 0, sizeof(rqpm));
memset(&args, 0, sizeof(args));
- rq.cmd_type = REQ_TYPE_PM_RESUME;
- rq.special = &args;
- rq.data = &rqpm;
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_PM_RESUME;
+ rq->cmd_flags |= REQ_PREEMPT;
+ rq->special = &args;
+ rq->data = &rqpm;
rqpm.pm_step = ide_pm_state_start_resume;
rqpm.pm_state = PM_EVENT_ON;
- err = ide_do_drive_cmd(drive, &rq, ide_head_wait);
+ err = blk_execute_rq(drive->queue, NULL, rq, 1);
+ blk_put_request(rq);
if (err == 0 && dev->driver) {
ide_driver_t *drv = to_ide_driver(dev->driver);
return err;
}
+static int generic_drive_reset(ide_drive_t *drive)
+{
+ struct request *rq;
+ int ret = 0;
+
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_SPECIAL;
+ rq->cmd_len = 1;
+ rq->cmd[0] = REQ_DRIVE_RESET;
+ rq->cmd_flags |= REQ_SOFTBARRIER;
+ if (blk_execute_rq(drive->queue, NULL, rq, 1))
+ ret = rq->errors;
+ blk_put_request(rq);
+ return ret;
+}
+
int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev,
unsigned int cmd, unsigned long arg)
{
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
- /*
- * Abort the current command on the
- * group if there is one, taking
- * care not to allow anything else
- * to be queued and to die on the
- * spot if we miss one somehow
- */
-
- spin_lock_irqsave(&ide_lock, flags);
+ return generic_drive_reset(drive);
- if (HWGROUP(drive)->resetting) {
- spin_unlock_irqrestore(&ide_lock, flags);
- return -EBUSY;
- }
-
- ide_abort(drive, "drive reset");
-
- BUG_ON(HWGROUP(drive)->handler);
-
- /* Ensure nothing gets queued after we
- drop the lock. Reset will clear the busy */
-
- HWGROUP(drive)->busy = 1;
- spin_unlock_irqrestore(&ide_lock, flags);
- (void) ide_do_reset(drive);
-
- return 0;
case HDIO_GET_BUSSTATE:
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
EXPORT_SYMBOL(generic_ide_ioctl);
-/*
- * stridx() returns the offset of c within s,
- * or -1 if c is '\0' or not found within s.
- */
-static int __init stridx (const char *s, char c)
-{
- char *i = strchr(s, c);
- return (i && c) ? i - s : -1;
-}
-
-/*
- * match_parm() does parsing for ide_setup():
- *
- * 1. the first char of s must be '='.
- * 2. if the remainder matches one of the supplied keywords,
- * the index (1 based) of the keyword is negated and returned.
- * 3. if the remainder is a series of no more than max_vals numbers
- * separated by commas, the numbers are saved in vals[] and a
- * count of how many were saved is returned. Base10 is assumed,
- * and base16 is allowed when prefixed with "0x".
- * 4. otherwise, zero is returned.
- */
-static int __init match_parm (char *s, const char *keywords[], int vals[], int max_vals)
-{
- static const char *decimal = "0123456789";
- static const char *hex = "0123456789abcdef";
- int i, n;
-
- if (*s++ == '=') {
- /*
- * Try matching against the supplied keywords,
- * and return -(index+1) if we match one
- */
- if (keywords != NULL) {
- for (i = 0; *keywords != NULL; ++i) {
- if (!strcmp(s, *keywords++))
- return -(i+1);
- }
- }
- /*
- * Look for a series of no more than "max_vals"
- * numeric values separated by commas, in base10,
- * or base16 when prefixed with "0x".
- * Return a count of how many were found.
- */
- for (n = 0; (i = stridx(decimal, *s)) >= 0;) {
- vals[n] = i;
- while ((i = stridx(decimal, *++s)) >= 0)
- vals[n] = (vals[n] * 10) + i;
- if (*s == 'x' && !vals[n]) {
- while ((i = stridx(hex, *++s)) >= 0)
- vals[n] = (vals[n] * 0x10) + i;
- }
- if (++n == max_vals)
- break;
- if (*s == ',' || *s == ';')
- ++s;
- }
- if (!*s)
- return n;
- }
- return 0; /* zero = nothing matched */
-}
-
-/*
- * ide_setup() gets called VERY EARLY during initialization,
- * to handle kernel "command line" strings beginning with "hdx=" or "ide".
- *
- * Remember to update Documentation/ide/ide.txt if you change something here.
- */
-static int __init ide_setup(char *s)
-{
- ide_hwif_t *hwif;
- ide_drive_t *drive;
- unsigned int hw, unit;
- int vals[3];
- const char max_drive = 'a' + ((MAX_HWIFS * MAX_DRIVES) - 1);
-
- if (strncmp(s,"hd",2) == 0 && s[2] == '=') /* hd= is for hd.c */
- return 0; /* driver and not us */
-
- if (strncmp(s,"ide",3) && strncmp(s,"idebus",6) && strncmp(s,"hd",2))
- return 0;
-
- printk(KERN_INFO "ide_setup: %s", s);
- init_ide_data ();
-
-#ifdef CONFIG_BLK_DEV_IDEDOUBLER
- if (!strcmp(s, "ide=doubler")) {
- extern int ide_doubler;
-
- printk(" : Enabled support for IDE doublers\n");
- ide_doubler = 1;
- goto obsolete_option;
- }
-#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
-
- if (!strcmp(s, "ide=nodma")) {
- printk(" : Prevented DMA\n");
- noautodma = 1;
- goto obsolete_option;
- }
-
-#ifdef CONFIG_BLK_DEV_IDEACPI
- if (!strcmp(s, "ide=noacpi")) {
- //printk(" : Disable IDE ACPI support.\n");
- ide_noacpi = 1;
- goto obsolete_option;
- }
- if (!strcmp(s, "ide=acpigtf")) {
- //printk(" : Enable IDE ACPI _GTF support.\n");
- ide_acpigtf = 1;
- goto obsolete_option;
- }
- if (!strcmp(s, "ide=acpionboot")) {
- //printk(" : Call IDE ACPI methods on boot.\n");
- ide_acpionboot = 1;
- goto obsolete_option;
- }
-#endif /* CONFIG_BLK_DEV_IDEACPI */
-
- /*
- * Look for drive options: "hdx="
- */
- if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) {
- const char *hd_words[] = {
- "none", "noprobe", "nowerr", "cdrom", "nodma",
- "-6", "-7", "-8", "-9", "-10",
- "noflush", "remap", "remap63", "scsi", NULL };
- unit = s[2] - 'a';
- hw = unit / MAX_DRIVES;
- unit = unit % MAX_DRIVES;
- hwif = &ide_hwifs[hw];
- drive = &hwif->drives[unit];
- if (strncmp(s + 4, "ide-", 4) == 0) {
- strlcpy(drive->driver_req, s + 4, sizeof(drive->driver_req));
- goto obsolete_option;
- }
- switch (match_parm(&s[3], hd_words, vals, 3)) {
- case -1: /* "none" */
- case -2: /* "noprobe" */
- drive->noprobe = 1;
- goto obsolete_option;
- case -3: /* "nowerr" */
- drive->bad_wstat = BAD_R_STAT;
- goto obsolete_option;
- case -4: /* "cdrom" */
- drive->present = 1;
- drive->media = ide_cdrom;
- /* an ATAPI device ignores DRDY */
- drive->ready_stat = 0;
- goto obsolete_option;
- case -5: /* nodma */
- drive->nodma = 1;
- goto obsolete_option;
- case -11: /* noflush */
- drive->noflush = 1;
- goto obsolete_option;
- case -12: /* "remap" */
- drive->remap_0_to_1 = 1;
- goto obsolete_option;
- case -13: /* "remap63" */
- drive->sect0 = 63;
- goto obsolete_option;
- case -14: /* "scsi" */
- drive->scsi = 1;
- goto obsolete_option;
- case 3: /* cyl,head,sect */
- drive->media = ide_disk;
- drive->ready_stat = READY_STAT;
- drive->cyl = drive->bios_cyl = vals[0];
- drive->head = drive->bios_head = vals[1];
- drive->sect = drive->bios_sect = vals[2];
- drive->present = 1;
- drive->forced_geom = 1;
- goto obsolete_option;
- default:
- goto bad_option;
- }
- }
-
- if (s[0] != 'i' || s[1] != 'd' || s[2] != 'e')
- goto bad_option;
- /*
- * Look for bus speed option: "idebus="
- */
- if (s[3] == 'b' && s[4] == 'u' && s[5] == 's') {
- if (match_parm(&s[6], NULL, vals, 1) != 1)
- goto bad_option;
- if (vals[0] >= 20 && vals[0] <= 66) {
- idebus_parameter = vals[0];
- } else
- printk(" -- BAD BUS SPEED! Expected value from 20 to 66");
- goto obsolete_option;
- }
-
-bad_option:
- printk(" -- BAD OPTION\n");
- return 1;
-obsolete_option:
- printk(" -- OBSOLETE OPTION, WILL BE REMOVED SOON!\n");
- return 1;
-}
-
-EXPORT_SYMBOL(ide_lock);
-
static int ide_bus_match(struct device *dev, struct device_driver *drv)
{
return 1;
int ret;
printk(KERN_INFO "Uniform Multi-Platform E-IDE driver\n");
- system_bus_speed = ide_system_bus_speed();
-
- printk(KERN_INFO "ide: Assuming %dMHz system bus speed "
- "for PIO modes%s\n", system_bus_speed,
- idebus_parameter ? "" : "; override with idebus=xx");
ret = bus_register(&ide_bus_type);
if (ret < 0) {
goto out_port_class;
}
- init_ide_data();
-
proc_ide_create();
return 0;
return ret;
}
-#ifdef MODULE
-static char *options = NULL;
-module_param(options, charp, 0);
-MODULE_LICENSE("GPL");
-
-static void __init parse_options (char *line)
-{
- char *next = line;
-
- if (line == NULL || !*line)
- return;
- while ((line = next) != NULL) {
- if ((next = strchr(line,' ')) != NULL)
- *next++ = 0;
- if (!ide_setup(line))
- printk (KERN_INFO "Unknown option '%s'\n", line);
- }
-}
-
-int __init init_module (void)
-{
- parse_options(options);
- return ide_init();
-}
-
-void __exit cleanup_module (void)
+static void __exit ide_exit(void)
{
proc_ide_destroy();
bus_unregister(&ide_bus_type);
}
-#else /* !MODULE */
-
-__setup("", ide_setup);
-
module_init(ide_init);
+module_exit(ide_exit);
-#endif /* MODULE */
+MODULE_LICENSE("GPL");
git.openpandora.org / pandora-kernel.git / blobdiff