ide: Fix file references in drivers/ide/

[pandora-kernel.git] / drivers / ide / Kconfig

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 9827c5e..811dbbd 100644 (file)
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -327,7 +327,7 @@ config BLK_DEV_OPTI621
        select BLK_DEV_IDEPCI
        help
          This is a driver for the OPTi 82C621 EIDE controller.
-         Please read the comments at the top of <file:drivers/ide/pci/opti621.c>.
+         Please read the comments at the top of <file:drivers/ide/opti621.c>.
 
 config BLK_DEV_RZ1000
        tristate "RZ1000 chipset bugfix/support"
@@ -365,7 +365,7 @@ config BLK_DEV_ALI15X3
          normal dual channel support.
 
          Please read the comments at the top of
-         <file:drivers/ide/pci/alim15x3.c>.
+         <file:drivers/ide/alim15x3.c>.
 
          If unsure, say N.
 
@@ -528,7 +528,7 @@ config BLK_DEV_NS87415
          This driver adds detection and support for the NS87415 chip
          (used mainly on SPARC64 and PA-RISC machines).
 
-         Please read the comments at the top of <file:drivers/ide/pci/ns87415.c>.
+         Please read the comments at the top of <file:drivers/ide/ns87415.c>.
 
 config BLK_DEV_PDC202XX_OLD
        tristate "PROMISE PDC202{46|62|65|67} support"
@@ -547,7 +547,7 @@ config BLK_DEV_PDC202XX_OLD
          for more than one card.
 
          Please read the comments at the top of
-         <file:drivers/ide/pci/pdc202xx_old.c>.
+         <file:drivers/ide/pdc202xx_old.c>.
 
          If unsure, say N.
 
@@ -593,7 +593,7 @@ config BLK_DEV_SIS5513
          ATA100: SiS635, SiS645, SiS650, SiS730, SiS735, SiS740,
          SiS745, SiS750
 
-         Please read the comments at the top of <file:drivers/ide/pci/sis5513.c>.
+         Please read the comments at the top of <file:drivers/ide/sis5513.c>.
 
 config BLK_DEV_SL82C105
        tristate "Winbond SL82c105 support"
@@ -616,7 +616,7 @@ config BLK_DEV_SLC90E66
          look-a-like to the PIIX4 it should be a nice addition.
 
          Please read the comments at the top of
-         <file:drivers/ide/pci/slc90e66.c>.
+         <file:drivers/ide/slc90e66.c>.
 
 config BLK_DEV_TRM290
        tristate "Tekram TRM290 chipset support"
@@ -625,7 +625,7 @@ config BLK_DEV_TRM290
          This driver adds support for bus master DMA transfers
          using the Tekram TRM290 PCI IDE chip. Volunteers are
          needed for further tweaking and development.
-         Please read the comments at the top of <file:drivers/ide/pci/trm290.c>.
+         Please read the comments at the top of <file:drivers/ide/trm290.c>.
 
 config BLK_DEV_VIA82CXXX
        tristate "VIA82CXXX chipset support"
@@ -836,7 +836,7 @@ config BLK_DEV_ALI14XX
          of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
          I/O speeds to be set as well.
          See the files <file:Documentation/ide/ide.txt> and
-         <file:drivers/ide/legacy/ali14xx.c> for more info.
+         <file:drivers/ide/ali14xx.c> for more info.
 
 config BLK_DEV_DTC2278
        tristate "DTC-2278 support"
@@ -847,7 +847,7 @@ config BLK_DEV_DTC2278
          boot parameter. It enables support for the secondary IDE interface
          of the DTC-2278 card, and permits faster I/O speeds to be set as
          well. See the <file:Documentation/ide/ide.txt> and
-         <file:drivers/ide/legacy/dtc2278.c> files for more info.
+         <file:drivers/ide/dtc2278.c> files for more info.
 
 config BLK_DEV_HT6560B
        tristate "Holtek HT6560B support"
@@ -858,7 +858,7 @@ config BLK_DEV_HT6560B
          boot parameter. It enables support for the secondary IDE interface
          of the Holtek card, and permits faster I/O speeds to be set as well.
          See the <file:Documentation/ide/ide.txt> and
-         <file:drivers/ide/legacy/ht6560b.c> files for more info.
+         <file:drivers/ide/ht6560b.c> files for more info.
 
 config BLK_DEV_QD65XX
        tristate "QDI QD65xx support"
@@ -867,7 +867,7 @@ config BLK_DEV_QD65XX
        help
          This driver is enabled at runtime using the "qd65xx.probe" kernel
          boot parameter.  It permits faster I/O speeds to be set.  See the
-         <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
+         <file:Documentation/ide/ide.txt> and <file:drivers/ide/qd65xx.c>
          for more info.
 
 config BLK_DEV_UMC8672
@@ -879,7 +879,7 @@ config BLK_DEV_UMC8672
          boot parameter. It enables support for the secondary IDE interface
          of the UMC-8672, and permits faster I/O speeds to be set as well.
          See the files <file:Documentation/ide/ide.txt> and
-         <file:drivers/ide/legacy/umc8672.c> for more info.
+         <file:drivers/ide/umc8672.c> for more info.
 
 endif