-/* Intel 7 core Memory Controller kernel module (Nehalem)
+/* Intel i7 core/Nehalem Memory Controller kernel module
+ *
+ * This driver supports yhe memory controllers found on the Intel
+ * processor families i7core, i7core 7xx/8xx, i5core, Xeon 35xx,
+ * Xeon 55xx and Xeon 56xx also known as Nehalem, Nehalem-EP, Lynnfield
+ * and Westmere-EP.
*
* This file may be distributed under the terms of the
* GNU General Public License version 2 only.
*
- * Copyright (c) 2009 by:
+ * Copyright (c) 2009-2010 by:
* Mauro Carvalho Chehab <mchehab@redhat.com>
*
* Red Hat Inc. http://www.redhat.com
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/slab.h>
+#include <linux/delay.h>
#include <linux/edac.h>
#include <linux/mmzone.h>
+#include <linux/edac_mce.h>
+#include <linux/smp.h>
+#include <asm/processor.h>
#include "edac_core.h"
-/* To use the new pci_[read/write]_config_qword instead of two dword */
-#define USE_QWORD 1
+/*
+ * This is used for Nehalem-EP and Nehalem-EX devices, where the non-core
+ * registers start at bus 255, and are not reported by BIOS.
+ * We currently find devices with only 2 sockets. In order to support more QPI
+ * Quick Path Interconnect, just increment this number.
+ */
+#define MAX_SOCKET_BUSES 2
+
/*
* Alter this version for the module when modifications are made
#define I7CORE_REVISION " Ver: 1.0.0 " __DATE__
#define EDAC_MOD_STR "i7core_edac"
-/* HACK: temporary, just to enable all logs, for now */
-#undef debugf0
-#define debugf0(fmt, arg...) edac_printk(KERN_INFO, "i7core", fmt, ##arg)
-
/*
* Debug macros
*/
* i7core Memory Controller Registers
*/
+ /* OFFSETS for Device 0 Function 0 */
+
+#define MC_CFG_CONTROL 0x90
+
/* OFFSETS for Device 3 Function 0 */
#define MC_CONTROL 0x48
#define DIMM1_COR_ERR(r) (((r) >> 16) & 0x7fff)
#define DIMM0_COR_ERR(r) ((r) & 0x7fff)
+/* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */
+#define MC_COR_ECC_CNT_0 0x80
+#define MC_COR_ECC_CNT_1 0x84
+#define MC_COR_ECC_CNT_2 0x88
+#define MC_COR_ECC_CNT_3 0x8c
+#define MC_COR_ECC_CNT_4 0x90
+#define MC_COR_ECC_CNT_5 0x94
+
+#define DIMM_TOP_COR_ERR(r) (((r) >> 16) & 0x7fff)
+#define DIMM_BOT_COR_ERR(r) ((r) & 0x7fff)
+
+
/* OFFSETS for Devices 4,5 and 6 Function 0 */
#define MC_CHANNEL_DIMM_INIT_PARAMS 0x58
#define REPEAT_EN 0x01
/* OFFSETS for Devices 4,5 and 6 Function 1 */
+
#define MC_DOD_CH_DIMM0 0x48
#define MC_DOD_CH_DIMM1 0x4c
#define MC_DOD_CH_DIMM2 0x50
};
struct pci_id_descr {
- int dev;
- int func;
- int dev_id;
- struct pci_dev *pdev;
+ int dev;
+ int func;
+ int dev_id;
+ int optional;
+};
+
+struct pci_id_table {
+ struct pci_id_descr *descr;
+ int n_devs;
+};
+
+struct i7core_dev {
+ struct list_head list;
+ u8 socket;
+ struct pci_dev **pdev;
+ int n_devs;
+ struct mem_ctl_info *mci;
};
struct i7core_pvt {
- struct pci_dev *pci_mcr[MAX_MCR_FUNC + 1];
- struct pci_dev *pci_ch[NUM_CHANS][MAX_CHAN_FUNC + 1];
+ struct pci_dev *pci_noncore;
+ struct pci_dev *pci_mcr[MAX_MCR_FUNC + 1];
+ struct pci_dev *pci_ch[NUM_CHANS][MAX_CHAN_FUNC + 1];
+
+ struct i7core_dev *i7core_dev;
+
struct i7core_info info;
struct i7core_inject inject;
struct i7core_channel channel[NUM_CHANS];
- int channels; /* Number of active channels */
+
+ int channels; /* Number of active channels */
int ce_count_available;
- unsigned long ce_count[MAX_DIMMS]; /* ECC corrected errors counts per dimm */
- int last_ce_count[MAX_DIMMS];
+ int csrow_map[NUM_CHANS][MAX_DIMMS];
-};
+ /* ECC corrected errors counts per udimm */
+ unsigned long udimm_ce_count[MAX_DIMMS];
+ int udimm_last_ce_count[MAX_DIMMS];
+ /* ECC corrected errors counts per rdimm */
+ unsigned long rdimm_ce_count[NUM_CHANS][MAX_DIMMS];
+ int rdimm_last_ce_count[NUM_CHANS][MAX_DIMMS];
+
+ unsigned int is_registered;
+
+ /* mcelog glue */
+ struct edac_mce edac_mce;
-/* Device name and register DID (Device ID) */
-struct i7core_dev_info {
- const char *ctl_name; /* name for this device */
- u16 fsb_mapping_errors; /* DID for the branchmap,control */
+ /* Fifo double buffers */
+ struct mce mce_entry[MCE_LOG_LEN];
+ struct mce mce_outentry[MCE_LOG_LEN];
+
+ /* Fifo in/out counters */
+ unsigned mce_in, mce_out;
+
+ /* Count indicator to show errors not got */
+ unsigned mce_overrun;
};
+/* Static vars */
+static LIST_HEAD(i7core_edac_list);
+static DEFINE_MUTEX(i7core_edac_lock);
+
#define PCI_DESCR(device, function, device_id) \
.dev = (device), \
.func = (function), \
.dev_id = (device_id)
-struct pci_id_descr pci_devs[] = {
+struct pci_id_descr pci_dev_descr_i7core_nehalem[] = {
/* Memory controller */
{ PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_I7_MCR) },
{ PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_I7_MC_TAD) },
- { PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_I7_MC_RAS) }, /* if RDIMM is supported */
+ /* Exists only for RDIMM */
+ { PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_I7_MC_RAS), .optional = 1 },
{ PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_I7_MC_TEST) },
/* Channel 0 */
{ PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR) },
{ PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK) },
{ PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC) },
+
+ /* Generic Non-core registers */
+ /*
+ * This is the PCI device on i7core and on Xeon 35xx (8086:2c41)
+ * On Xeon 55xx, however, it has a different id (8086:2c40). So,
+ * the probing code needs to test for the other address in case of
+ * failure of this one
+ */
+ { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_I7_NONCORE) },
+
+};
+
+struct pci_id_descr pci_dev_descr_lynnfield[] = {
+ { PCI_DESCR( 3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR) },
+ { PCI_DESCR( 3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD) },
+ { PCI_DESCR( 3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST) },
+
+ { PCI_DESCR( 4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL) },
+ { PCI_DESCR( 4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR) },
+ { PCI_DESCR( 4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK) },
+ { PCI_DESCR( 4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC) },
+
+ { PCI_DESCR( 5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL) },
+ { PCI_DESCR( 5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR) },
+ { PCI_DESCR( 5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK) },
+ { PCI_DESCR( 5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC) },
+
+ /*
+ * This is the PCI device has an alternate address on some
+ * processors like Core i7 860
+ */
+ { PCI_DESCR( 0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE) },
+};
+
+struct pci_id_descr pci_dev_descr_i7core_westmere[] = {
+ /* Memory controller */
+ { PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2) },
+ { PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2) },
+ /* Exists only for RDIMM */
+ { PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2), .optional = 1 },
+ { PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2) },
+
+ /* Channel 0 */
+ { PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2) },
+ { PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2) },
+ { PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2) },
+ { PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2) },
+
+ /* Channel 1 */
+ { PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2) },
+ { PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2) },
+ { PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2) },
+ { PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2) },
+
+ /* Channel 2 */
+ { PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2) },
+ { PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2) },
+ { PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2) },
+ { PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2) },
+
+ /* Generic Non-core registers */
+ { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2) },
+
+};
+
+#define PCI_ID_TABLE_ENTRY(A) { A, ARRAY_SIZE(A) }
+struct pci_id_table pci_dev_table[] = {
+ PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_nehalem),
+ PCI_ID_TABLE_ENTRY(pci_dev_descr_lynnfield),
+ PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_westmere),
};
-#define N_DEVS ARRAY_SIZE(pci_devs)
/*
* pci_device_id table for which devices we are looking for
- * This should match the first device at pci_devs table
*/
static const struct pci_device_id i7core_pci_tbl[] __devinitdata = {
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I7_MCR)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_X58_HUB_MGMT)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0)},
{0,} /* 0 terminated list. */
};
-
-/* Table of devices attributes supported by this driver */
-static const struct i7core_dev_info i7core_devs[] = {
- {
- .ctl_name = "i7 Core",
- .fsb_mapping_errors = PCI_DEVICE_ID_INTEL_I7_MCR,
- },
-};
-
static struct edac_pci_ctl_info *i7core_pci;
/****************************************************************************
#define ECCx8(pvt) ((pvt)->info.mc_control & (1 << 1))
/* MC_STATUS bits */
-#define ECC_ENABLED(pvt) ((pvt)->info.mc_status & (1 << 3))
+#define ECC_ENABLED(pvt) ((pvt)->info.mc_status & (1 << 4))
#define CH_DISABLED(pvt, ch) ((pvt)->info.mc_status & (1 << ch))
/* MC_MAX_DOD read functions */
return cols[col & 0x3];
}
+static struct i7core_dev *get_i7core_dev(u8 socket)
+{
+ struct i7core_dev *i7core_dev;
+
+ list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
+ if (i7core_dev->socket == socket)
+ return i7core_dev;
+ }
+
+ return NULL;
+}
/****************************************************************************
Memory check routines
****************************************************************************/
-static struct pci_dev *get_pdev_slot_func(int slot, int func)
+static struct pci_dev *get_pdev_slot_func(u8 socket, unsigned slot,
+ unsigned func)
{
+ struct i7core_dev *i7core_dev = get_i7core_dev(socket);
int i;
- for (i = 0; i < N_DEVS; i++) {
- if (!pci_devs[i].pdev)
+ if (!i7core_dev)
+ return NULL;
+
+ for (i = 0; i < i7core_dev->n_devs; i++) {
+ if (!i7core_dev->pdev[i])
continue;
- if (PCI_SLOT(pci_devs[i].pdev->devfn) == slot &&
- PCI_FUNC(pci_devs[i].pdev->devfn) == func) {
- return pci_devs[i].pdev;
+ if (PCI_SLOT(i7core_dev->pdev[i]->devfn) == slot &&
+ PCI_FUNC(i7core_dev->pdev[i]->devfn) == func) {
+ return i7core_dev->pdev[i];
}
}
return NULL;
}
-static int i7core_get_active_channels(int *channels, int *csrows)
+/**
+ * i7core_get_active_channels() - gets the number of channels and csrows
+ * @socket: Quick Path Interconnect socket
+ * @channels: Number of channels that will be returned
+ * @csrows: Number of csrows found
+ *
+ * Since EDAC core needs to know in advance the number of available channels
+ * and csrows, in order to allocate memory for csrows/channels, it is needed
+ * to run two similar steps. At the first step, implemented on this function,
+ * it checks the number of csrows/channels present at one socket.
+ * this is used in order to properly allocate the size of mci components.
+ *
+ * It should be noticed that none of the current available datasheets explain
+ * or even mention how csrows are seen by the memory controller. So, we need
+ * to add a fake description for csrows.
+ * So, this driver is attributing one DIMM memory for one csrow.
+ */
+static int i7core_get_active_channels(u8 socket, unsigned *channels,
+ unsigned *csrows)
{
struct pci_dev *pdev = NULL;
int i, j;
*channels = 0;
*csrows = 0;
- pdev = get_pdev_slot_func(3, 0);
+ pdev = get_pdev_slot_func(socket, 3, 0);
if (!pdev) {
- i7core_printk(KERN_ERR, "Couldn't find fn 3.0!!!\n");
+ i7core_printk(KERN_ERR, "Couldn't find socket %d fn 3.0!!!\n",
+ socket);
return -ENODEV;
}
if (status & (1 << i))
continue;
- pdev = get_pdev_slot_func(i + 4, 1);
+ pdev = get_pdev_slot_func(socket, i + 4, 1);
if (!pdev) {
- i7core_printk(KERN_ERR, "Couldn't find fn %d.%d!!!\n",
- i + 4, 1);
+ i7core_printk(KERN_ERR, "Couldn't find socket %d "
+ "fn %d.%d!!!\n",
+ socket, i + 4, 1);
return -ENODEV;
}
/* Devices 4-6 function 1 */
}
}
- debugf0("Number of active channels: %d\n", *channels);
+ debugf0("Number of active channels on socket %d: %d\n",
+ socket, *channels);
return 0;
}
-static int get_dimm_config(struct mem_ctl_info *mci)
+static int get_dimm_config(struct mem_ctl_info *mci, int *csrow)
{
struct i7core_pvt *pvt = mci->pvt_info;
struct csrow_info *csr;
struct pci_dev *pdev;
- int i, j, csrow = 0;
+ int i, j;
unsigned long last_page = 0;
enum edac_type mode;
enum mem_type mtype;
pci_read_config_dword(pdev, MC_MAX_DOD, &pvt->info.max_dod);
pci_read_config_dword(pdev, MC_CHANNEL_MAPPER, &pvt->info.ch_map);
- debugf0("MC control=0x%08x status=0x%08x dod=0x%08x map=0x%08x\n",
- pvt->info.mc_control, pvt->info.mc_status,
+ debugf0("QPI %d control=0x%08x status=0x%08x dod=0x%08x map=0x%08x\n",
+ pvt->i7core_dev->socket, pvt->info.mc_control, pvt->info.mc_status,
pvt->info.max_dod, pvt->info.ch_map);
if (ECC_ENABLED(pvt)) {
}
/* FIXME: need to handle the error codes */
- debugf0("DOD Max limits: DIMMS: %d, %d-ranked, %d-banked\n",
+ debugf0("DOD Max limits: DIMMS: %d, %d-ranked, %d-banked "
+ "x%x x 0x%x\n",
numdimms(pvt->info.max_dod),
numrank(pvt->info.max_dod >> 2),
- numbank(pvt->info.max_dod >> 4));
- debugf0("DOD Max rows x colums = 0x%x x 0x%x\n",
+ numbank(pvt->info.max_dod >> 4),
numrow(pvt->info.max_dod >> 6),
numcol(pvt->info.max_dod >> 9));
- debugf0("Memory channel configuration:\n");
-
for (i = 0; i < NUM_CHANS; i++) {
u32 data, dimm_dod[3], value[8];
+ if (!pvt->pci_ch[i][0])
+ continue;
+
if (!CH_ACTIVE(pvt, i)) {
debugf0("Channel %i is not active\n", i);
continue;
pci_read_config_dword(pvt->pci_ch[i][0],
MC_CHANNEL_DIMM_INIT_PARAMS, &data);
- pvt->channel[i].ranks = (data & QUAD_RANK_PRESENT) ? 4 : 2;
+ pvt->channel[i].ranks = (data & QUAD_RANK_PRESENT) ?
+ 4 : 2;
if (data & REGISTERED_DIMM)
mtype = MEM_RDDR3;
pvt->channel[i].dimms++;
- debugf0("\tdimm %d (0x%08x) %d Mb offset: %x, "
- "numbank: %d,\n\t\t"
- "numrank: %d, numrow: %#x, numcol: %#x\n",
- j, dimm_dod[j], size,
+ debugf0("\tdimm %d %d Mb offset: %x, "
+ "bank: %d, rank: %d, row: %#x, col: %#x\n",
+ j, size,
RANKOFFSET(dimm_dod[j]),
banks, ranks, rows, cols);
npages = size << (20 - PAGE_SHIFT);
#endif
- csr = &mci->csrows[csrow];
+ csr = &mci->csrows[*csrow];
csr->first_page = last_page + 1;
last_page += npages;
csr->last_page = last_page;
csr->page_mask = 0;
csr->grain = 8;
- csr->csrow_idx = csrow;
+ csr->csrow_idx = *csrow;
csr->nr_channels = 1;
csr->channels[0].chan_idx = i;
csr->channels[0].ce_count = 0;
+ pvt->csrow_map[i][j] = *csrow;
+
switch (banks) {
case 4:
csr->dtype = DEV_X4;
csr->edac_mode = mode;
csr->mtype = mtype;
- csrow++;
+ (*csrow)++;
}
pci_read_config_dword(pdev, MC_SAG_CH_0, &value[0]);
pci_read_config_dword(pdev, MC_SAG_CH_5, &value[5]);
pci_read_config_dword(pdev, MC_SAG_CH_6, &value[6]);
pci_read_config_dword(pdev, MC_SAG_CH_7, &value[7]);
- debugf0("\t[%i] DIVBY3\tREMOVED\tOFFSET\n", i);
+ debugf1("\t[%i] DIVBY3\tREMOVED\tOFFSET\n", i);
for (j = 0; j < 8; j++)
- debugf0("\t\t%#x\t%#x\t%#x\n",
+ debugf1("\t\t%#x\t%#x\t%#x\n",
(value[j] >> 27) & 0x1,
(value[j] >> 24) & 0x7,
(value[j] && ((1 << 24) - 1)));
return -ENODEV;
pci_write_config_dword(pvt->pci_ch[pvt->inject.channel][0],
- MC_CHANNEL_ERROR_MASK, 0);
+ MC_CHANNEL_ERROR_INJECT, 0);
return 0;
}
rc = strict_strtoul(data, 10, &value);
if ((rc < 0) || (value > 3))
- return 0;
+ return -EIO;
pvt->inject.section = (u32) value;
return count;
rc = strict_strtoul(data, 10, &value);
if ((rc < 0) || (value > 7))
- return 0;
+ return -EIO;
pvt->inject.type = (u32) value;
return count;
rc = strict_strtoul(data, 10, &value);
if (rc < 0)
- return 0;
+ return -EIO;
pvt->inject.eccmask = (u32) value;
return count;
* 23:16 and 31:24). Flipping bits in two symbol pairs will cause an
* uncorrectable error to be injected.
*/
-static ssize_t i7core_inject_addrmatch_store(struct mem_ctl_info *mci,
- const char *data, size_t count)
-{
- struct i7core_pvt *pvt = mci->pvt_info;
- char *cmd, *val;
- long value;
- int rc;
- if (pvt->inject.enable)
- disable_inject(mci);
+#define DECLARE_ADDR_MATCH(param, limit) \
+static ssize_t i7core_inject_store_##param( \
+ struct mem_ctl_info *mci, \
+ const char *data, size_t count) \
+{ \
+ struct i7core_pvt *pvt; \
+ long value; \
+ int rc; \
+ \
+ debugf1("%s()\n", __func__); \
+ pvt = mci->pvt_info; \
+ \
+ if (pvt->inject.enable) \
+ disable_inject(mci); \
+ \
+ if (!strcasecmp(data, "any") || !strcasecmp(data, "any\n"))\
+ value = -1; \
+ else { \
+ rc = strict_strtoul(data, 10, &value); \
+ if ((rc < 0) || (value >= limit)) \
+ return -EIO; \
+ } \
+ \
+ pvt->inject.param = value; \
+ \
+ return count; \
+} \
+ \
+static ssize_t i7core_inject_show_##param( \
+ struct mem_ctl_info *mci, \
+ char *data) \
+{ \
+ struct i7core_pvt *pvt; \
+ \
+ pvt = mci->pvt_info; \
+ debugf1("%s() pvt=%p\n", __func__, pvt); \
+ if (pvt->inject.param < 0) \
+ return sprintf(data, "any\n"); \
+ else \
+ return sprintf(data, "%d\n", pvt->inject.param);\
+}
- do {
- cmd = strsep((char **) &data, ":");
- if (!cmd)
- break;
- val = strsep((char **) &data, " \n\t");
- if (!val)
- return cmd - data;
-
- if (!strcasecmp(val, "any"))
- value = -1;
- else {
- rc = strict_strtol(val, 10, &value);
- if ((rc < 0) || (value < 0))
- return cmd - data;
- }
+#define ATTR_ADDR_MATCH(param) \
+ { \
+ .attr = { \
+ .name = #param, \
+ .mode = (S_IRUGO | S_IWUSR) \
+ }, \
+ .show = i7core_inject_show_##param, \
+ .store = i7core_inject_store_##param, \
+ }
- if (!strcasecmp(cmd, "channel")) {
- if (value < 3)
- pvt->inject.channel = value;
- else
- return cmd - data;
- } else if (!strcasecmp(cmd, "dimm")) {
- if (value < 4)
- pvt->inject.dimm = value;
- else
- return cmd - data;
- } else if (!strcasecmp(cmd, "rank")) {
- if (value < 4)
- pvt->inject.rank = value;
- else
- return cmd - data;
- } else if (!strcasecmp(cmd, "bank")) {
- if (value < 4)
- pvt->inject.bank = value;
- else
- return cmd - data;
- } else if (!strcasecmp(cmd, "page")) {
- if (value <= 0xffff)
- pvt->inject.page = value;
- else
- return cmd - data;
- } else if (!strcasecmp(cmd, "col") ||
- !strcasecmp(cmd, "column")) {
- if (value <= 0x3fff)
- pvt->inject.col = value;
- else
- return cmd - data;
- }
- } while (1);
+DECLARE_ADDR_MATCH(channel, 3);
+DECLARE_ADDR_MATCH(dimm, 3);
+DECLARE_ADDR_MATCH(rank, 4);
+DECLARE_ADDR_MATCH(bank, 32);
+DECLARE_ADDR_MATCH(page, 0x10000);
+DECLARE_ADDR_MATCH(col, 0x4000);
- return count;
-}
-
-static ssize_t i7core_inject_addrmatch_show(struct mem_ctl_info *mci,
- char *data)
+static int write_and_test(struct pci_dev *dev, int where, u32 val)
{
- struct i7core_pvt *pvt = mci->pvt_info;
- char channel[4], dimm[4], bank[4], rank[4], page[7], col[7];
+ u32 read;
+ int count;
- if (pvt->inject.channel < 0)
- sprintf(channel, "any");
- else
- sprintf(channel, "%d", pvt->inject.channel);
- if (pvt->inject.dimm < 0)
- sprintf(dimm, "any");
- else
- sprintf(dimm, "%d", pvt->inject.dimm);
- if (pvt->inject.bank < 0)
- sprintf(bank, "any");
- else
- sprintf(bank, "%d", pvt->inject.bank);
- if (pvt->inject.rank < 0)
- sprintf(rank, "any");
- else
- sprintf(rank, "%d", pvt->inject.rank);
- if (pvt->inject.page < 0)
- sprintf(page, "any");
- else
- sprintf(page, "0x%04x", pvt->inject.page);
- if (pvt->inject.col < 0)
- sprintf(col, "any");
- else
- sprintf(col, "0x%04x", pvt->inject.col);
+ debugf0("setting pci %02x:%02x.%x reg=%02x value=%08x\n",
+ dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
+ where, val);
+
+ for (count = 0; count < 10; count++) {
+ if (count)
+ msleep(100);
+ pci_write_config_dword(dev, where, val);
+ pci_read_config_dword(dev, where, &read);
+
+ if (read == val)
+ return 0;
+ }
+
+ i7core_printk(KERN_ERR, "Error during set pci %02x:%02x.%x reg=%02x "
+ "write=%08x. Read=%08x\n",
+ dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
+ where, val, read);
- return sprintf(data, "channel: %s\ndimm: %s\nbank: %s\n"
- "rank: %s\npage: %s\ncolumn: %s\n",
- channel, dimm, bank, rank, page, col);
+ return -EINVAL;
}
/*
/* Sets pvt->inject.dimm mask */
if (pvt->inject.dimm < 0)
- mask |= 1L << 41;
+ mask |= 1LL << 41;
else {
if (pvt->channel[pvt->inject.channel].dimms > 2)
- mask |= (pvt->inject.dimm & 0x3L) << 35;
+ mask |= (pvt->inject.dimm & 0x3LL) << 35;
else
- mask |= (pvt->inject.dimm & 0x1L) << 36;
+ mask |= (pvt->inject.dimm & 0x1LL) << 36;
}
/* Sets pvt->inject.rank mask */
if (pvt->inject.rank < 0)
- mask |= 1L << 40;
+ mask |= 1LL << 40;
else {
if (pvt->channel[pvt->inject.channel].dimms > 2)
- mask |= (pvt->inject.rank & 0x1L) << 34;
+ mask |= (pvt->inject.rank & 0x1LL) << 34;
else
- mask |= (pvt->inject.rank & 0x3L) << 34;
+ mask |= (pvt->inject.rank & 0x3LL) << 34;
}
/* Sets pvt->inject.bank mask */
if (pvt->inject.bank < 0)
- mask |= 1L << 39;
+ mask |= 1LL << 39;
else
- mask |= (pvt->inject.bank & 0x15L) << 30;
+ mask |= (pvt->inject.bank & 0x15LL) << 30;
/* Sets pvt->inject.page mask */
if (pvt->inject.page < 0)
- mask |= 1L << 38;
+ mask |= 1LL << 38;
else
- mask |= (pvt->inject.page & 0xffffL) << 14;
+ mask |= (pvt->inject.page & 0xffff) << 14;
/* Sets pvt->inject.column mask */
if (pvt->inject.col < 0)
- mask |= 1L << 37;
+ mask |= 1LL << 37;
else
- mask |= (pvt->inject.col & 0x3fffL);
-
-#if USE_QWORD
- pci_write_config_qword(pvt->pci_ch[pvt->inject.channel][0],
- MC_CHANNEL_ADDR_MATCH, mask);
-#else
- pci_write_config_dword(pvt->pci_ch[pvt->inject.channel][0],
- MC_CHANNEL_ADDR_MATCH, mask);
- pci_write_config_dword(pvt->pci_ch[pvt->inject.channel][0],
- MC_CHANNEL_ADDR_MATCH + 4, mask >> 32L);
-#endif
-
-#if 1
-#if USE_QWORD
- u64 rdmask;
- pci_read_config_qword(pvt->pci_ch[pvt->inject.channel][0],
- MC_CHANNEL_ADDR_MATCH, &rdmask);
- debugf0("Inject addr match write 0x%016llx, read: 0x%016llx\n",
- mask, rdmask);
-#else
- u32 rdmask1, rdmask2;
-
- pci_read_config_dword(pvt->pci_ch[pvt->inject.channel][0],
- MC_CHANNEL_ADDR_MATCH, &rdmask1);
- pci_read_config_dword(pvt->pci_ch[pvt->inject.channel][0],
- MC_CHANNEL_ADDR_MATCH + 4, &rdmask2);
-
- debugf0("Inject addr match write 0x%016llx, read: 0x%08x%08x\n",
- mask, rdmask1, rdmask2);
-#endif
-#endif
-
- pci_write_config_dword(pvt->pci_ch[pvt->inject.channel][0],
- MC_CHANNEL_ERROR_MASK, pvt->inject.eccmask);
+ mask |= (pvt->inject.col & 0x3fff);
/*
* bit 0: REPEAT_EN
(pvt->inject.section & 0x3) << 1 |
(pvt->inject.type & 0x6) << (3 - 1);
- pci_write_config_dword(pvt->pci_ch[pvt->inject.channel][0],
- MC_CHANNEL_ERROR_MASK, injectmask);
+ /* Unlock writes to registers - this register is write only */
+ pci_write_config_dword(pvt->pci_noncore,
+ MC_CFG_CONTROL, 0x2);
+
+ write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ADDR_MATCH, mask);
+ write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ADDR_MATCH + 4, mask >> 32L);
+
+ write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ERROR_MASK, pvt->inject.eccmask);
+
+ write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ERROR_INJECT, injectmask);
+
+ /*
+ * This is something undocumented, based on my tests
+ * Without writing 8 to this register, errors aren't injected. Not sure
+ * why.
+ */
+ pci_write_config_dword(pvt->pci_noncore,
+ MC_CFG_CONTROL, 8);
debugf0("Error inject addr match 0x%016llx, ecc 0x%08x,"
" inject 0x%08x\n",
mask, pvt->inject.eccmask, injectmask);
-
return count;
}
struct i7core_pvt *pvt = mci->pvt_info;
u32 injectmask;
+ if (!pvt->pci_ch[pvt->inject.channel][0])
+ return 0;
+
pci_read_config_dword(pvt->pci_ch[pvt->inject.channel][0],
- MC_CHANNEL_ERROR_MASK, &injectmask);
+ MC_CHANNEL_ERROR_INJECT, &injectmask);
debugf0("Inject error read: 0x%018x\n", injectmask);
return sprintf(data, "%d\n", pvt->inject.enable);
}
-static ssize_t i7core_ce_regs_show(struct mem_ctl_info *mci, char *data)
-{
- struct i7core_pvt *pvt = mci->pvt_info;
+#define DECLARE_COUNTER(param) \
+static ssize_t i7core_show_counter_##param( \
+ struct mem_ctl_info *mci, \
+ char *data) \
+{ \
+ struct i7core_pvt *pvt = mci->pvt_info; \
+ \
+ debugf1("%s() \n", __func__); \
+ if (!pvt->ce_count_available || (pvt->is_registered)) \
+ return sprintf(data, "data unavailable\n"); \
+ return sprintf(data, "%lu\n", \
+ pvt->udimm_ce_count[param]); \
+}
- if (!pvt->ce_count_available)
- return sprintf(data, "unavailable\n");
+#define ATTR_COUNTER(param) \
+ { \
+ .attr = { \
+ .name = __stringify(udimm##param), \
+ .mode = (S_IRUGO | S_IWUSR) \
+ }, \
+ .show = i7core_show_counter_##param \
+ }
- return sprintf(data, "dimm0: %lu\ndimm1: %lu\ndimm2: %lu\n",
- pvt->ce_count[0],
- pvt->ce_count[1],
- pvt->ce_count[2]);
-}
+DECLARE_COUNTER(0);
+DECLARE_COUNTER(1);
+DECLARE_COUNTER(2);
/*
* Sysfs struct
*/
-static struct mcidev_sysfs_attribute i7core_inj_attrs[] = {
+
+static struct mcidev_sysfs_attribute i7core_addrmatch_attrs[] = {
+ ATTR_ADDR_MATCH(channel),
+ ATTR_ADDR_MATCH(dimm),
+ ATTR_ADDR_MATCH(rank),
+ ATTR_ADDR_MATCH(bank),
+ ATTR_ADDR_MATCH(page),
+ ATTR_ADDR_MATCH(col),
+ { .attr = { .name = NULL } }
+};
+
+static struct mcidev_sysfs_group i7core_inject_addrmatch = {
+ .name = "inject_addrmatch",
+ .mcidev_attr = i7core_addrmatch_attrs,
+};
+
+static struct mcidev_sysfs_attribute i7core_udimm_counters_attrs[] = {
+ ATTR_COUNTER(0),
+ ATTR_COUNTER(1),
+ ATTR_COUNTER(2),
+};
+
+static struct mcidev_sysfs_group i7core_udimm_counters = {
+ .name = "all_channel_counts",
+ .mcidev_attr = i7core_udimm_counters_attrs,
+};
+
+static struct mcidev_sysfs_attribute i7core_sysfs_attrs[] = {
{
.attr = {
.name = "inject_section",
.show = i7core_inject_eccmask_show,
.store = i7core_inject_eccmask_store,
}, {
- .attr = {
- .name = "inject_addrmatch",
- .mode = (S_IRUGO | S_IWUSR)
- },
- .show = i7core_inject_addrmatch_show,
- .store = i7core_inject_addrmatch_store,
+ .grp = &i7core_inject_addrmatch,
}, {
.attr = {
.name = "inject_enable",
},
.show = i7core_inject_enable_show,
.store = i7core_inject_enable_store,
- }, {
- .attr = {
- .name = "corrected_error_counts",
- .mode = (S_IRUGO | S_IWUSR)
- },
- .show = i7core_ce_regs_show,
- .store = NULL,
},
+ { .attr = { .name = NULL } }, /* Reserved for udimm counters */
+ { .attr = { .name = NULL } }
};
/****************************************************************************
* i7core_put_devices 'put' all the devices that we have
* reserved via 'get'
*/
-static void i7core_put_devices(void)
+static void i7core_put_devices(struct i7core_dev *i7core_dev)
{
int i;
- for (i = 0; i < N_DEVS; i++)
- pci_dev_put(pci_devs[i].pdev);
+ debugf0(__FILE__ ": %s()\n", __func__);
+ for (i = 0; i < i7core_dev->n_devs; i++) {
+ struct pci_dev *pdev = i7core_dev->pdev[i];
+ if (!pdev)
+ continue;
+ debugf0("Removing dev %02x:%02x.%d\n",
+ pdev->bus->number,
+ PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+ pci_dev_put(pdev);
+ }
+ kfree(i7core_dev->pdev);
+ list_del(&i7core_dev->list);
+ kfree(i7core_dev);
+}
+
+static void i7core_put_all_devices(void)
+{
+ struct i7core_dev *i7core_dev, *tmp;
+
+ list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list)
+ i7core_put_devices(i7core_dev);
+}
+
+static void __init i7core_xeon_pci_fixup(struct pci_id_table *table)
+{
+ struct pci_dev *pdev = NULL;
+ int i;
+ /*
+ * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core pci buses
+ * aren't announced by acpi. So, we need to use a legacy scan probing
+ * to detect them
+ */
+ while (table && table->descr) {
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL, table->descr[0].dev_id, NULL);
+ if (unlikely(!pdev)) {
+ for (i = 0; i < MAX_SOCKET_BUSES; i++)
+ pcibios_scan_specific_bus(255-i);
+ }
+ table++;
+ }
}
/*
*
* Need to 'get' device 16 func 1 and func 2
*/
-static int i7core_get_devices(void)
+int i7core_get_onedevice(struct pci_dev **prev, int devno,
+ struct pci_id_descr *dev_descr, unsigned n_devs)
{
- int rc, i;
+ struct i7core_dev *i7core_dev;
+
struct pci_dev *pdev = NULL;
+ u8 bus = 0;
+ u8 socket = 0;
+
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ dev_descr->dev_id, *prev);
- for (i = 0; i < N_DEVS; i++) {
+ /*
+ * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs
+ * is at addr 8086:2c40, instead of 8086:2c41. So, we need
+ * to probe for the alternate address in case of failure
+ */
+ if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_I7_NONCORE && !pdev)
pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
- pci_devs[i].dev_id, NULL);
- if (likely(pdev))
- pci_devs[i].pdev = pdev;
- else {
- i7core_printk(KERN_ERR,
- "Device not found: PCI ID %04x:%04x "
- "(dev %d, func %d)\n",
- PCI_VENDOR_ID_INTEL, pci_devs[i].dev_id,
- pci_devs[i].dev, pci_devs[i].func);
+ PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT, *prev);
- /* Dev 3 function 2 only exists on chips with RDIMMs */
- if ((pci_devs[i].dev == 3) && (pci_devs[i].func == 2))
- continue;
+ if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE && !pdev)
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT,
+ *prev);
- /* End of list, leave */
- rc = -ENODEV;
- goto error;
+ if (!pdev) {
+ if (*prev) {
+ *prev = pdev;
+ return 0;
}
- /* Sanity check */
- if (unlikely(PCI_SLOT(pdev->devfn) != pci_devs[i].dev ||
- PCI_FUNC(pdev->devfn) != pci_devs[i].func)) {
- i7core_printk(KERN_ERR,
- "Device PCI ID %04x:%04x "
- "has fn %d.%d instead of fn %d.%d\n",
- PCI_VENDOR_ID_INTEL, pci_devs[i].dev_id,
- PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
- pci_devs[i].dev, pci_devs[i].func);
- rc = -EINVAL;
- goto error;
- }
+ if (dev_descr->optional)
+ return 0;
- /* Be sure that the device is enabled */
- rc = pci_enable_device(pdev);
- if (unlikely(rc < 0)) {
- i7core_printk(KERN_ERR,
- "Couldn't enable PCI ID %04x:%04x "
- "fn %d.%d\n",
- PCI_VENDOR_ID_INTEL, pci_devs[i].dev_id,
- PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
- goto error;
+ if (devno == 0)
+ return -ENODEV;
+
+ i7core_printk(KERN_ERR,
+ "Device not found: dev %02x.%d PCI ID %04x:%04x\n",
+ dev_descr->dev, dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+ /* End of list, leave */
+ return -ENODEV;
+ }
+ bus = pdev->bus->number;
+
+ if (bus == 0x3f)
+ socket = 0;
+ else
+ socket = 255 - bus;
+
+ i7core_dev = get_i7core_dev(socket);
+ if (!i7core_dev) {
+ i7core_dev = kzalloc(sizeof(*i7core_dev), GFP_KERNEL);
+ if (!i7core_dev)
+ return -ENOMEM;
+ i7core_dev->pdev = kzalloc(sizeof(*i7core_dev->pdev) * n_devs,
+ GFP_KERNEL);
+ if (!i7core_dev->pdev) {
+ kfree(i7core_dev);
+ return -ENOMEM;
}
+ i7core_dev->socket = socket;
+ i7core_dev->n_devs = n_devs;
+ list_add_tail(&i7core_dev->list, &i7core_edac_list);
+ }
+
+ if (i7core_dev->pdev[devno]) {
+ i7core_printk(KERN_ERR,
+ "Duplicated device for "
+ "dev %02x:%02x.%d PCI ID %04x:%04x\n",
+ bus, dev_descr->dev, dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+ pci_dev_put(pdev);
+ return -ENODEV;
+ }
- i7core_printk(KERN_INFO,
- "Registered device %0x:%0x fn %d.%d\n",
- PCI_VENDOR_ID_INTEL, pci_devs[i].dev_id,
- PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+ i7core_dev->pdev[devno] = pdev;
+
+ /* Sanity check */
+ if (unlikely(PCI_SLOT(pdev->devfn) != dev_descr->dev ||
+ PCI_FUNC(pdev->devfn) != dev_descr->func)) {
+ i7core_printk(KERN_ERR,
+ "Device PCI ID %04x:%04x "
+ "has dev %02x:%02x.%d instead of dev %02x:%02x.%d\n",
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id,
+ bus, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+ bus, dev_descr->dev, dev_descr->func);
+ return -ENODEV;
+ }
+
+ /* Be sure that the device is enabled */
+ if (unlikely(pci_enable_device(pdev) < 0)) {
+ i7core_printk(KERN_ERR,
+ "Couldn't enable "
+ "dev %02x:%02x.%d PCI ID %04x:%04x\n",
+ bus, dev_descr->dev, dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+ return -ENODEV;
}
+ debugf0("Detected socket %d dev %02x:%02x.%d PCI ID %04x:%04x\n",
+ socket, bus, dev_descr->dev,
+ dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+ *prev = pdev;
+
return 0;
+}
-error:
- i7core_put_devices();
- return -EINVAL;
+static int i7core_get_devices(struct pci_id_table *table)
+{
+ int i, rc;
+ struct pci_dev *pdev = NULL;
+ struct pci_id_descr *dev_descr;
+
+ while (table && table->descr) {
+ dev_descr = table->descr;
+ for (i = 0; i < table->n_devs; i++) {
+ pdev = NULL;
+ do {
+ rc = i7core_get_onedevice(&pdev, i, &dev_descr[i],
+ table->n_devs);
+ if (rc < 0) {
+ if (i == 0) {
+ i = table->n_devs;
+ break;
+ }
+ i7core_put_all_devices();
+ return -ENODEV;
+ }
+ } while (pdev);
+ }
+ table++;
+ }
+
+ return 0;
+ return 0;
}
-static int mci_bind_devs(struct mem_ctl_info *mci)
+static int mci_bind_devs(struct mem_ctl_info *mci,
+ struct i7core_dev *i7core_dev)
{
struct i7core_pvt *pvt = mci->pvt_info;
struct pci_dev *pdev;
int i, func, slot;
- for (i = 0; i < N_DEVS; i++) {
- pdev = pci_devs[i].pdev;
+ /* Associates i7core_dev and mci for future usage */
+ pvt->i7core_dev = i7core_dev;
+ i7core_dev->mci = mci;
+
+ pvt->is_registered = 0;
+ for (i = 0; i < i7core_dev->n_devs; i++) {
+ pdev = i7core_dev->pdev[i];
if (!pdev)
continue;
if (unlikely(func > MAX_CHAN_FUNC))
goto error;
pvt->pci_ch[slot - 4][func] = pdev;
- } else
+ } else if (!slot && !func)
+ pvt->pci_noncore = pdev;
+ else
goto error;
- debugf0("Associated fn %d.%d, dev = %p\n",
- PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), pdev);
+ debugf0("Associated fn %d.%d, dev = %p, socket %d\n",
+ PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+ pdev, i7core_dev->socket);
+
+ if (PCI_SLOT(pdev->devfn) == 3 &&
+ PCI_FUNC(pdev->devfn) == 2)
+ pvt->is_registered = 1;
}
+
+ /*
+ * Add extra nodes to count errors on udimm
+ * For registered memory, this is not needed, since the counters
+ * are already displayed at the standard locations
+ */
+ if (!pvt->is_registered)
+ i7core_sysfs_attrs[ARRAY_SIZE(i7core_sysfs_attrs)-2].grp =
+ &i7core_udimm_counters;
+
return 0;
error:
/****************************************************************************
Error check routines
****************************************************************************/
+static void i7core_rdimm_update_csrow(struct mem_ctl_info *mci,
+ int chan, int dimm, int add)
+{
+ char *msg;
+ struct i7core_pvt *pvt = mci->pvt_info;
+ int row = pvt->csrow_map[chan][dimm], i;
+
+ for (i = 0; i < add; i++) {
+ msg = kasprintf(GFP_KERNEL, "Corrected error "
+ "(Socket=%d channel=%d dimm=%d)",
+ pvt->i7core_dev->socket, chan, dimm);
+
+ edac_mc_handle_fbd_ce(mci, row, 0, msg);
+ kfree (msg);
+ }
+}
+
+static void i7core_rdimm_update_ce_count(struct mem_ctl_info *mci,
+ int chan, int new0, int new1, int new2)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ int add0 = 0, add1 = 0, add2 = 0;
+ /* Updates CE counters if it is not the first time here */
+ if (pvt->ce_count_available) {
+ /* Updates CE counters */
+
+ add2 = new2 - pvt->rdimm_last_ce_count[chan][2];
+ add1 = new1 - pvt->rdimm_last_ce_count[chan][1];
+ add0 = new0 - pvt->rdimm_last_ce_count[chan][0];
+
+ if (add2 < 0)
+ add2 += 0x7fff;
+ pvt->rdimm_ce_count[chan][2] += add2;
+
+ if (add1 < 0)
+ add1 += 0x7fff;
+ pvt->rdimm_ce_count[chan][1] += add1;
+
+ if (add0 < 0)
+ add0 += 0x7fff;
+ pvt->rdimm_ce_count[chan][0] += add0;
+ } else
+ pvt->ce_count_available = 1;
+
+ /* Store the new values */
+ pvt->rdimm_last_ce_count[chan][2] = new2;
+ pvt->rdimm_last_ce_count[chan][1] = new1;
+ pvt->rdimm_last_ce_count[chan][0] = new0;
+
+ /*updated the edac core */
+ if (add0 != 0)
+ i7core_rdimm_update_csrow(mci, chan, 0, add0);
+ if (add1 != 0)
+ i7core_rdimm_update_csrow(mci, chan, 1, add1);
+ if (add2 != 0)
+ i7core_rdimm_update_csrow(mci, chan, 2, add2);
+
+}
+
+static void i7core_rdimm_check_mc_ecc_err(struct mem_ctl_info *mci)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ u32 rcv[3][2];
+ int i, new0, new1, new2;
+
+ /*Read DEV 3: FUN 2: MC_COR_ECC_CNT regs directly*/
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_0,
+ &rcv[0][0]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_1,
+ &rcv[0][1]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_2,
+ &rcv[1][0]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_3,
+ &rcv[1][1]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_4,
+ &rcv[2][0]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_5,
+ &rcv[2][1]);
+ for (i = 0 ; i < 3; i++) {
+ debugf3("MC_COR_ECC_CNT%d = 0x%x; MC_COR_ECC_CNT%d = 0x%x\n",
+ (i * 2), rcv[i][0], (i * 2) + 1, rcv[i][1]);
+ /*if the channel has 3 dimms*/
+ if (pvt->channel[i].dimms > 2) {
+ new0 = DIMM_BOT_COR_ERR(rcv[i][0]);
+ new1 = DIMM_TOP_COR_ERR(rcv[i][0]);
+ new2 = DIMM_BOT_COR_ERR(rcv[i][1]);
+ } else {
+ new0 = DIMM_TOP_COR_ERR(rcv[i][0]) +
+ DIMM_BOT_COR_ERR(rcv[i][0]);
+ new1 = DIMM_TOP_COR_ERR(rcv[i][1]) +
+ DIMM_BOT_COR_ERR(rcv[i][1]);
+ new2 = 0;
+ }
+
+ i7core_rdimm_update_ce_count(mci, i, new0, new1, new2);
+ }
+}
/* This function is based on the device 3 function 4 registers as described on:
* Intel Xeon Processor 5500 Series Datasheet Volume 2
* also available at:
* http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
*/
-static void check_mc_test_err(struct mem_ctl_info *mci)
+static void i7core_udimm_check_mc_ecc_err(struct mem_ctl_info *mci)
{
struct i7core_pvt *pvt = mci->pvt_info;
u32 rcv1, rcv0;
int new0, new1, new2;
if (!pvt->pci_mcr[4]) {
- debugf0("%s MCR registers not found\n",__func__);
+ debugf0("%s MCR registers not found\n", __func__);
return;
}
- /* Corrected error reads */
+ /* Corrected test errors */
pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV1, &rcv1);
pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV0, &rcv0);
new1 = DIMM1_COR_ERR(rcv0);
new0 = DIMM0_COR_ERR(rcv0);
- debugf2("%s CE rcv1=0x%08x rcv0=0x%08x, %d %d %d\n",
- (pvt->ce_count_available ? "UPDATE" : "READ"),
- rcv1, rcv0, new0, new1, new2);
-
/* Updates CE counters if it is not the first time here */
if (pvt->ce_count_available) {
/* Updates CE counters */
int add0, add1, add2;
- add2 = new2 - pvt->last_ce_count[2];
- add1 = new1 - pvt->last_ce_count[1];
- add0 = new0 - pvt->last_ce_count[0];
+ add2 = new2 - pvt->udimm_last_ce_count[2];
+ add1 = new1 - pvt->udimm_last_ce_count[1];
+ add0 = new0 - pvt->udimm_last_ce_count[0];
if (add2 < 0)
add2 += 0x7fff;
- pvt->ce_count[2] += add2;
+ pvt->udimm_ce_count[2] += add2;
if (add1 < 0)
add1 += 0x7fff;
- pvt->ce_count[1] += add1;
+ pvt->udimm_ce_count[1] += add1;
if (add0 < 0)
add0 += 0x7fff;
- pvt->ce_count[0] += add0;
+ pvt->udimm_ce_count[0] += add0;
+
+ if (add0 | add1 | add2)
+ i7core_printk(KERN_ERR, "New Corrected error(s): "
+ "dimm0: +%d, dimm1: +%d, dimm2 +%d\n",
+ add0, add1, add2);
} else
pvt->ce_count_available = 1;
/* Store the new values */
- pvt->last_ce_count[2] = new2;
- pvt->last_ce_count[1] = new1;
- pvt->last_ce_count[0] = new0;
+ pvt->udimm_last_ce_count[2] = new2;
+ pvt->udimm_last_ce_count[1] = new1;
+ pvt->udimm_last_ce_count[0] = new0;
+}
+
+/*
+ * According with tables E-11 and E-12 of chapter E.3.3 of Intel 64 and IA-32
+ * Architectures Software Developer’s Manual Volume 3B.
+ * Nehalem are defined as family 0x06, model 0x1a
+ *
+ * The MCA registers used here are the following ones:
+ * struct mce field MCA Register
+ * m->status MSR_IA32_MC8_STATUS
+ * m->addr MSR_IA32_MC8_ADDR
+ * m->misc MSR_IA32_MC8_MISC
+ * In the case of Nehalem, the error information is masked at .status and .misc
+ * fields
+ */
+static void i7core_mce_output_error(struct mem_ctl_info *mci,
+ struct mce *m)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ char *type, *optype, *err, *msg;
+ unsigned long error = m->status & 0x1ff0000l;
+ u32 optypenum = (m->status >> 4) & 0x07;
+ u32 core_err_cnt = (m->status >> 38) && 0x7fff;
+ u32 dimm = (m->misc >> 16) & 0x3;
+ u32 channel = (m->misc >> 18) & 0x3;
+ u32 syndrome = m->misc >> 32;
+ u32 errnum = find_first_bit(&error, 32);
+ int csrow;
+
+ if (m->mcgstatus & 1)
+ type = "FATAL";
+ else
+ type = "NON_FATAL";
+
+ switch (optypenum) {
+ case 0:
+ optype = "generic undef request";
+ break;
+ case 1:
+ optype = "read error";
+ break;
+ case 2:
+ optype = "write error";
+ break;
+ case 3:
+ optype = "addr/cmd error";
+ break;
+ case 4:
+ optype = "scrubbing error";
+ break;
+ default:
+ optype = "reserved";
+ break;
+ }
+
+ switch (errnum) {
+ case 16:
+ err = "read ECC error";
+ break;
+ case 17:
+ err = "RAS ECC error";
+ break;
+ case 18:
+ err = "write parity error";
+ break;
+ case 19:
+ err = "redundacy loss";
+ break;
+ case 20:
+ err = "reserved";
+ break;
+ case 21:
+ err = "memory range error";
+ break;
+ case 22:
+ err = "RTID out of range";
+ break;
+ case 23:
+ err = "address parity error";
+ break;
+ case 24:
+ err = "byte enable parity error";
+ break;
+ default:
+ err = "unknown";
+ }
+
+ /* FIXME: should convert addr into bank and rank information */
+ msg = kasprintf(GFP_ATOMIC,
+ "%s (addr = 0x%08llx, cpu=%d, Dimm=%d, Channel=%d, "
+ "syndrome=0x%08x, count=%d, Err=%08llx:%08llx (%s: %s))\n",
+ type, (long long) m->addr, m->cpu, dimm, channel,
+ syndrome, core_err_cnt, (long long)m->status,
+ (long long)m->misc, optype, err);
+
+ debugf0("%s", msg);
+
+ csrow = pvt->csrow_map[channel][dimm];
+
+ /* Call the helper to output message */
+ if (m->mcgstatus & 1)
+ edac_mc_handle_fbd_ue(mci, csrow, 0,
+ 0 /* FIXME: should be channel here */, msg);
+ else if (!pvt->is_registered)
+ edac_mc_handle_fbd_ce(mci, csrow,
+ 0 /* FIXME: should be channel here */, msg);
+
+ kfree(msg);
}
/*
*/
static void i7core_check_error(struct mem_ctl_info *mci)
{
- check_mc_test_err(mci);
+ struct i7core_pvt *pvt = mci->pvt_info;
+ int i;
+ unsigned count = 0;
+ struct mce *m;
+
+ /*
+ * MCE first step: Copy all mce errors into a temporary buffer
+ * We use a double buffering here, to reduce the risk of
+ * loosing an error.
+ */
+ smp_rmb();
+ count = (pvt->mce_out + MCE_LOG_LEN - pvt->mce_in)
+ % MCE_LOG_LEN;
+ if (!count)
+ goto check_ce_error;
+
+ m = pvt->mce_outentry;
+ if (pvt->mce_in + count > MCE_LOG_LEN) {
+ unsigned l = MCE_LOG_LEN - pvt->mce_in;
+
+ memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * l);
+ smp_wmb();
+ pvt->mce_in = 0;
+ count -= l;
+ m += l;
+ }
+ memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * count);
+ smp_wmb();
+ pvt->mce_in += count;
+
+ smp_rmb();
+ if (pvt->mce_overrun) {
+ i7core_printk(KERN_ERR, "Lost %d memory errors\n",
+ pvt->mce_overrun);
+ smp_wmb();
+ pvt->mce_overrun = 0;
+ }
+
+ /*
+ * MCE second step: parse errors and display
+ */
+ for (i = 0; i < count; i++)
+ i7core_mce_output_error(mci, &pvt->mce_outentry[i]);
+
+ /*
+ * Now, let's increment CE error counts
+ */
+check_ce_error:
+ if (!pvt->is_registered)
+ i7core_udimm_check_mc_ecc_err(mci);
+ else
+ i7core_rdimm_check_mc_ecc_err(mci);
}
/*
- * i7core_probe Probe for ONE instance of device to see if it is
- * present.
- * return:
- * 0 for FOUND a device
- * < 0 for error code
+ * i7core_mce_check_error Replicates mcelog routine to get errors
+ * This routine simply queues mcelog errors, and
+ * return. The error itself should be handled later
+ * by i7core_check_error.
+ * WARNING: As this routine should be called at NMI time, extra care should
+ * be taken to avoid deadlocks, and to be as fast as possible.
*/
-static int __devinit i7core_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
+static int i7core_mce_check_error(void *priv, struct mce *mce)
{
- struct mem_ctl_info *mci;
- struct i7core_pvt *pvt;
- int num_channels;
- int num_csrows;
- int dev_idx = id->driver_data;
- int rc;
+ struct mem_ctl_info *mci = priv;
+ struct i7core_pvt *pvt = mci->pvt_info;
- if (unlikely(dev_idx >= ARRAY_SIZE(i7core_devs)))
- return -EINVAL;
+ /*
+ * Just let mcelog handle it if the error is
+ * outside the memory controller
+ */
+ if (((mce->status & 0xffff) >> 7) != 1)
+ return 0;
- /* get the pci devices we want to reserve for our use */
- rc = i7core_get_devices();
- if (unlikely(rc < 0))
- return rc;
+ /* Bank 8 registers are the only ones that we know how to handle */
+ if (mce->bank != 8)
+ return 0;
- /* Check the number of active and not disabled channels */
- rc = i7core_get_active_channels(&num_channels, &num_csrows);
- if (unlikely(rc < 0))
- goto fail0;
+#ifdef CONFIG_SMP
+ /* Only handle if it is the right mc controller */
+ if (cpu_data(mce->cpu).phys_proc_id != pvt->i7core_dev->socket)
+ return 0;
+#endif
- /* allocate a new MC control structure */
- mci = edac_mc_alloc(sizeof(*pvt), num_csrows, num_channels, 0);
- if (unlikely(!mci)) {
- rc = -ENOMEM;
- goto fail0;
+ smp_rmb();
+ if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
+ smp_wmb();
+ pvt->mce_overrun++;
+ return 0;
}
+ /* Copy memory error at the ringbuffer */
+ memcpy(&pvt->mce_entry[pvt->mce_out], mce, sizeof(*mce));
+ smp_wmb();
+ pvt->mce_out = (pvt->mce_out + 1) % MCE_LOG_LEN;
+
+ /* Handle fatal errors immediately */
+ if (mce->mcgstatus & 1)
+ i7core_check_error(mci);
+
+ /* Advice mcelog that the error were handled */
+ return 1;
+}
+
+static int i7core_register_mci(struct i7core_dev *i7core_dev,
+ int num_channels, int num_csrows)
+{
+ struct mem_ctl_info *mci;
+ struct i7core_pvt *pvt;
+ int csrow = 0;
+ int rc;
+
+ /* allocate a new MC control structure */
+ mci = edac_mc_alloc(sizeof(*pvt), num_csrows, num_channels,
+ i7core_dev->socket);
+ if (unlikely(!mci))
+ return -ENOMEM;
+
debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
- mci->dev = &pdev->dev; /* record ptr to the generic device */
+ /* record ptr to the generic device */
+ mci->dev = &i7core_dev->pdev[0]->dev;
pvt = mci->pvt_info;
memset(pvt, 0, sizeof(*pvt));
- mci->mc_idx = 0;
/*
* FIXME: how to handle RDDR3 at MCI level? It is possible to have
* Mixed RDDR3/UDDR3 with Nehalem, provided that they are on different
mci->edac_cap = EDAC_FLAG_NONE;
mci->mod_name = "i7core_edac.c";
mci->mod_ver = I7CORE_REVISION;
- mci->ctl_name = i7core_devs[dev_idx].ctl_name;
- mci->dev_name = pci_name(pdev);
+ mci->ctl_name = kasprintf(GFP_KERNEL, "i7 core #%d",
+ i7core_dev->socket);
+ mci->dev_name = pci_name(i7core_dev->pdev[0]);
mci->ctl_page_to_phys = NULL;
- mci->mc_driver_sysfs_attributes = i7core_inj_attrs;
+ mci->mc_driver_sysfs_attributes = i7core_sysfs_attrs;
/* Set the function pointer to an actual operation function */
mci->edac_check = i7core_check_error;
/* Store pci devices at mci for faster access */
- rc = mci_bind_devs(mci);
+ rc = mci_bind_devs(mci, i7core_dev);
if (unlikely(rc < 0))
- goto fail1;
+ goto fail;
/* Get dimm basic config */
- get_dimm_config(mci);
+ get_dimm_config(mci, &csrow);
/* add this new MC control structure to EDAC's list of MCs */
if (unlikely(edac_mc_add_mc(mci))) {
*/
rc = -EINVAL;
- goto fail1;
+ goto fail;
}
/* allocating generic PCI control info */
- i7core_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+ i7core_pci = edac_pci_create_generic_ctl(&i7core_dev->pdev[0]->dev,
+ EDAC_MOD_STR);
if (unlikely(!i7core_pci)) {
printk(KERN_WARNING
"%s(): Unable to create PCI control\n",
pvt->inject.page = -1;
pvt->inject.col = -1;
+ /* Registers on edac_mce in order to receive memory errors */
+ pvt->edac_mce.priv = mci;
+ pvt->edac_mce.check_error = i7core_mce_check_error;
+
+ rc = edac_mce_register(&pvt->edac_mce);
+ if (unlikely(rc < 0)) {
+ debugf0("MC: " __FILE__
+ ": %s(): failed edac_mce_register()\n", __func__);
+ }
+
+fail:
+ if (rc < 0)
+ edac_mc_free(mci);
+ return rc;
+}
+
+/*
+ * i7core_probe Probe for ONE instance of device to see if it is
+ * present.
+ * return:
+ * 0 for FOUND a device
+ * < 0 for error code
+ */
+static int __devinit i7core_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ int dev_idx = id->driver_data;
+ int rc;
+ struct i7core_dev *i7core_dev;
+
+ /*
+ * All memory controllers are allocated at the first pass.
+ */
+ if (unlikely(dev_idx >= 1))
+ return -EINVAL;
+
+ /* get the pci devices we want to reserve for our use */
+ mutex_lock(&i7core_edac_lock);
+
+ rc = i7core_get_devices(pci_dev_table);
+ if (unlikely(rc < 0))
+ goto fail0;
+
+ list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
+ int channels;
+ int csrows;
+
+ /* Check the number of active and not disabled channels */
+ rc = i7core_get_active_channels(i7core_dev->socket,
+ &channels, &csrows);
+ if (unlikely(rc < 0))
+ goto fail1;
+
+ rc = i7core_register_mci(i7core_dev, channels, csrows);
+ if (unlikely(rc < 0))
+ goto fail1;
+ }
+
i7core_printk(KERN_INFO, "Driver loaded.\n");
+ mutex_unlock(&i7core_edac_lock);
return 0;
fail1:
- edac_mc_free(mci);
-
+ i7core_put_all_devices();
fail0:
- i7core_put_devices();
+ mutex_unlock(&i7core_edac_lock);
return rc;
}
static void __devexit i7core_remove(struct pci_dev *pdev)
{
struct mem_ctl_info *mci;
+ struct i7core_dev *i7core_dev, *tmp;
debugf0(__FILE__ ": %s()\n", __func__);
if (i7core_pci)
edac_pci_release_generic_ctl(i7core_pci);
- mci = edac_mc_del_mc(&pdev->dev);
-
- if (!mci)
- return;
-
- /* retrieve references to resources, and free those resources */
- i7core_put_devices();
+ /*
+ * we have a trouble here: pdev value for removal will be wrong, since
+ * it will point to the X58 register used to detect that the machine
+ * is a Nehalem or upper design. However, due to the way several PCI
+ * devices are grouped together to provide MC functionality, we need
+ * to use a different method for releasing the devices
+ */
- edac_mc_free(mci);
+ mutex_lock(&i7core_edac_lock);
+ list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list) {
+ mci = edac_mc_del_mc(&i7core_dev->pdev[0]->dev);
+ if (mci) {
+ struct i7core_pvt *pvt = mci->pvt_info;
+
+ i7core_dev = pvt->i7core_dev;
+ edac_mce_unregister(&pvt->edac_mce);
+ kfree(mci->ctl_name);
+ edac_mc_free(mci);
+ i7core_put_devices(i7core_dev);
+ } else {
+ i7core_printk(KERN_ERR,
+ "Couldn't find mci for socket %d\n",
+ i7core_dev->socket);
+ }
+ }
+ mutex_unlock(&i7core_edac_lock);
}
MODULE_DEVICE_TABLE(pci, i7core_pci_tbl);
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
+ i7core_xeon_pci_fixup(pci_dev_table);
+
pci_rc = pci_register_driver(&i7core_driver);
- return (pci_rc < 0) ? pci_rc : 0;
+ if (pci_rc >= 0)
+ return 0;
+
+ i7core_printk(KERN_ERR, "Failed to register device with error %d.\n",
+ pci_rc);
+
+ return pci_rc;
}
/*