/*
- * w83697hf WDT driver
+ * w83697hf/hg WDT driver
*
+ * (c) Copyright 2006 Samuel Tardieu <sam@rfc1149.net>
* (c) Copyright 2006 Marcus Junker <junker@anduras.de>
*
- * Based on w83627hf_wdt.c advantechwdt.c which is based on wdt.c.
+ * Based on w83627hf_wdt.c which is based on advantechwdt.c
+ * which is based on wdt.c.
* Original copyright messages:
*
* (c) Copyright 2003 Pádraig Brady <P@draigBrady.com>
#include <asm/uaccess.h>
#include <asm/system.h>
-#define WATCHDOG_NAME "w83697hf WDT"
+#define WATCHDOG_NAME "w83697hf/hg WDT"
#define PFX WATCHDOG_NAME ": "
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
static spinlock_t io_lock;
/* You must set this - there is no sane way to probe for this board. */
-static int wdt_io = 0x2E;
+static int wdt_io = 0x2e;
module_param(wdt_io, int, 0);
-MODULE_PARM_DESC(wdt_io, "w83697hf WDT io port (default 0x2E)");
+MODULE_PARM_DESC(wdt_io, "w83697hf/hg WDT io port (default 0x2e, 0 = autodetect)");
static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
module_param(timeout, int, 0);
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
/*
* Kernel methods.
#define W83697HF_EFIR (wdt_io+0) /* Extended Function Index Register (same as EFER) */
#define W83697HF_EFDR (wdt_io+1) /* Extended Function Data Register */
-static void
-w83697hf_select_wd_register(void)
+static inline void
+w83697hf_unlock(void)
{
outb_p(0x87, W83697HF_EFER); /* Enter extended function mode */
outb_p(0x87, W83697HF_EFER); /* Again according to manual */
+}
+
+static inline void
+w83697hf_lock(void)
+{
+ outb_p(0xAA, W83697HF_EFER); /* Leave extended function mode */
+}
+
+/*
+ * The three functions w83697hf_get_reg(), w83697hf_set_reg() and
+ * w83697hf_write_timeout() must be called with the device unlocked.
+ */
- outb_p(0x29, W83697HF_EFER); /* select CR29 */
- outb_p(0x20, W83697HF_EFDR); /* select WDTO */
+static unsigned char
+w83697hf_get_reg(unsigned char reg)
+{
+ outb_p(reg, W83697HF_EFIR);
+ return inb_p(W83697HF_EFDR);
+}
- outb_p(0x07, W83697HF_EFER); /* point to logical device number reg */
- outb_p(0x08, W83697HF_EFDR); /* select logical device 8 (GPIO2) */
- outb_p(0x30, W83697HF_EFER); /* select CR30 */
- outb_p(0x01, W83697HF_EFDR); /* set bit 0 to activate GPIO2 */
+static void
+w83697hf_set_reg(unsigned char reg, unsigned char data)
+{
+ outb_p(reg, W83697HF_EFIR);
+ outb_p(data, W83697HF_EFDR);
}
static void
-w83697hf_unselect_wd_register(void)
+w83697hf_write_timeout(int timeout)
{
- outb_p(0xAA, W83697HF_EFER); /* Leave extended function mode */
+ w83697hf_set_reg(0xF4, timeout); /* Write Timeout counter to CRF4 */
+}
+
+static void
+w83697hf_select_wdt(void)
+{
+ w83697hf_unlock();
+ w83697hf_set_reg(0x07, 0x08); /* Switch to logic device 8 (GPIO2) */
+}
+
+static inline void
+w83697hf_deselect_wdt(void)
+{
+ w83697hf_lock();
}
static void
w83697hf_init(void)
{
- unsigned char t;
+ unsigned char bbuf;
- w83697hf_select_wd_register();
+ w83697hf_select_wdt();
- outb_p(0xF3, W83697HF_EFER); /* Select CRF3 */
+ bbuf = w83697hf_get_reg(0x29);
+ bbuf &= ~0x60;
+ bbuf |= 0x20;
+ w83697hf_set_reg(0x29, bbuf); /* Set pin 119 to WDTO# mode (= CR29, WDT0) */
- t=inb_p(W83697HF_EFDR); /* read CRF3 */
- if (t != 0) {
- printk (KERN_INFO PFX "Watchdog already running. Resetting timeout to %d sec\n", timeout);
- outb_p(timeout, W83697HF_EFDR); /* Write back to CRF3 */
- }
- outb_p(0xF4, W83697HF_EFER); /* Select CRF4 */
- t=inb_p(W83697HF_EFDR); /* read CRF4 */
- t&=~0x0C; /* set second mode & disable keyboard turning off watchdog */
- outb_p(t, W83697HF_EFDR); /* Write back to CRF4 */
+ bbuf = w83697hf_get_reg(0xF3);
+ bbuf &= ~0x04;
+ w83697hf_set_reg(0xF3, bbuf); /* Count mode is seconds */
- w83697hf_unselect_wd_register();
+ w83697hf_deselect_wdt();
}
-static void
-wdt_ctrl(int timeout)
+static int
+wdt_ping(void)
{
spin_lock(&io_lock);
+ w83697hf_select_wdt();
- w83697hf_select_wd_register();
-
- outb_p(0xF4, W83697HF_EFER); /* Select CRF4 */
- outb_p(timeout, W83697HF_EFDR); /* Write Timeout counter to CRF4 */
-
- w83697hf_unselect_wd_register();
+ w83697hf_write_timeout(timeout);
+ w83697hf_deselect_wdt();
spin_unlock(&io_lock);
+ return 0;
}
static int
-wdt_ping(void)
+wdt_enable(void)
{
- wdt_ctrl(timeout);
+ spin_lock(&io_lock);
+ w83697hf_select_wdt();
+
+ w83697hf_write_timeout(timeout);
+ w83697hf_set_reg(0x30, 1); /* Enable timer */
+
+ w83697hf_deselect_wdt();
+ spin_unlock(&io_lock);
return 0;
}
static int
wdt_disable(void)
{
- wdt_ctrl(0);
+ spin_lock(&io_lock);
+ w83697hf_select_wdt();
+
+ w83697hf_set_reg(0x30, 0); /* Disable timer */
+ w83697hf_write_timeout(0);
+
+ w83697hf_deselect_wdt();
+ spin_unlock(&io_lock);
return 0;
}
}
if (options & WDIOS_ENABLECARD) {
- wdt_ping();
+ wdt_enable();
retval = 0;
}
* Activate
*/
- wdt_ping();
+ wdt_enable();
return nonseekable_open(inode, file);
}
* Kernel Interfaces
*/
-static struct file_operations wdt_fops = {
+static const struct file_operations wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = wdt_write,
.notifier_call = wdt_notify_sys,
};
+static int
+w83697hf_check_wdt(void)
+{
+ if (!request_region(wdt_io, 2, WATCHDOG_NAME)) {
+ printk (KERN_ERR PFX "I/O address 0x%x already in use\n", wdt_io);
+ return -EIO;
+ }
+
+ printk (KERN_DEBUG PFX "Looking for watchdog at address 0x%x\n", wdt_io);
+ w83697hf_unlock();
+ if (w83697hf_get_reg(0x20) == 0x60) {
+ printk (KERN_INFO PFX "watchdog found at address 0x%x\n", wdt_io);
+ w83697hf_lock();
+ return 0;
+ }
+ w83697hf_lock(); /* Reprotect in case it was a compatible device */
+
+ printk (KERN_INFO PFX "watchdog not found at address 0x%x\n", wdt_io);
+ release_region(wdt_io, 2);
+ return -EIO;
+}
+
+static int w83697hf_ioports[] = { 0x2e, 0x4e, 0x00 };
+
static int __init
wdt_init(void)
{
- int ret;
+ int ret, i, found = 0;
spin_lock_init(&io_lock);
- printk (KERN_INFO "WDT driver for the Winbond(TM) W83697HF Super I/O chip initialising.\n");
+ printk (KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n");
- if (wdt_set_heartbeat(timeout)) {
- wdt_set_heartbeat(WATCHDOG_TIMEOUT);
- printk (KERN_INFO PFX "timeout value must be 1<=timeout<=255, using %d\n",
- WATCHDOG_TIMEOUT);
+ if (wdt_io == 0) {
+ /* we will autodetect the W83697HF/HG watchdog */
+ for (i = 0; ((!found) && (w83697hf_ioports[i] != 0)); i++) {
+ wdt_io = w83697hf_ioports[i];
+ if (!w83697hf_check_wdt())
+ found++;
+ }
+ } else {
+ if (!w83697hf_check_wdt())
+ found++;
}
- if (!request_region(wdt_io, 2, WATCHDOG_NAME)) {
- printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
- wdt_io);
+ if (!found) {
+ printk (KERN_ERR PFX "No W83697HF/HG could be found\n");
ret = -EIO;
goto out;
}
w83697hf_init();
+ wdt_disable(); /* Disable watchdog until first use */
+
+ if (wdt_set_heartbeat(timeout)) {
+ wdt_set_heartbeat(WATCHDOG_TIMEOUT);
+ printk (KERN_INFO PFX "timeout value must be 1<=timeout<=255, using %d\n",
+ WATCHDOG_TIMEOUT);
+ }
ret = register_reboot_notifier(&wdt_notifier);
if (ret != 0) {
module_exit(wdt_exit);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marcus Junker <junker@anduras.de>");
-MODULE_DESCRIPTION("w83697hf WDT driver");
+MODULE_AUTHOR("Marcus Junker <junker@anduras.de>, Samuel Tardieu <sam@rfc1149.net>");
+MODULE_DESCRIPTION("w83697hf/hg WDT driver");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);