Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6

[pandora-kernel.git] / drivers / char / Kconfig

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 78d928f..1b21c3a 100644 (file)
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -62,6 +62,23 @@ config HW_CONSOLE
        depends on VT && !S390 && !UML
        default y
 
+config VT_HW_CONSOLE_BINDING
+       bool "Support for binding and unbinding console drivers"
+       depends on HW_CONSOLE
+       default n
+       ---help---
+         The virtual terminal is the device that interacts with the physical
+         terminal through console drivers. On these systems, at least one
+         console driver is loaded. In other configurations, additional console
+         drivers may be enabled, such as the framebuffer console. If more than
+         1 console driver is enabled, setting this to 'y' will allow you to
+         select the console driver that will serve as the backend for the
+         virtual terminals.
+
+        See <file:Documentation/console/console.txt> for more
+        information. For framebuffer console users, please refer to
+        <file:Documentation/fb/fbcon.txt>.
+
 config SERIAL_NONSTANDARD
        bool "Non-standard serial port support"
        ---help---
@@ -422,6 +439,14 @@ config SGI_MBCS
          If you have an SGI Altix with an attached SABrick
          say Y or M here, otherwise say N.
 
+config MSPEC
+       tristate "Memory special operations driver"
+       depends on IA64
+       help
+         If you have an ia64 and you want to enable memory special
+         operations support (formerly known as fetchop), say Y here,
+         otherwise say N.
+
 source "drivers/serial/Kconfig"
 
 config UNIX98_PTYS
@@ -478,6 +503,21 @@ config LEGACY_PTY_COUNT
          When not in use, each legacy PTY occupies 12 bytes on 32-bit
          architectures and 24 bytes on 64-bit architectures.
 
+config BRIQ_PANEL
+       tristate 'Total Impact briQ front panel driver'
+       depends on PPC_CHRP
+       ---help---
+         The briQ is a small footprint CHRP computer with a frontpanel VFD, a
+         tristate led and two switches. It is the size of a CDROM drive.
+
+         If you have such one and want anything showing on the VFD then you
+         must answer Y here.
+
+         To compile this driver as a module, choose M here: the
+         module will be called briq_panel.
+
+         It's safe to say N here.
+
 config PRINTER
        tristate "Parallel printer support"
        depends on PARPORT
@@ -579,6 +619,13 @@ config HVC_CONSOLE
          console. This driver allows each pSeries partition to have a console
          which is accessed via the HMC.
 
+config HVC_ISERIES
+       bool "iSeries Hypervisor Virtual Console support"
+       depends on PPC_ISERIES && !VIOCONS
+       select HVC_DRIVER
+       help
+         iSeries machines support a hypervisor virtual console.
+
 config HVC_RTAS
        bool "IBM RTAS Console support"
        depends on PPC_RTAS
@@ -670,20 +717,7 @@ config NWFLASH
 
          If you're not sure, say N.
 
-config HW_RANDOM
-       tristate "Intel/AMD/VIA HW Random Number Generator support"
-       depends on (X86 || IA64) && PCI
-       ---help---
-         This driver provides kernel-side support for the Random Number
-         Generator hardware found on Intel i8xx-based motherboards,
-         AMD 76x-based motherboards, and Via Nehemiah CPUs.
-
-         Provides a character driver, used to read() entropy data.
-
-         To compile this driver as a module, choose M here: the
-         module will be called hw_random.
-
-         If unsure, say N.
+source "drivers/char/hw_random/Kconfig"
 
 config NVRAM
        tristate "/dev/nvram support"
@@ -713,7 +747,7 @@ config NVRAM
 
 config RTC
        tristate "Enhanced Real Time Clock Support"
-       depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM
+       depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM && !SUPERH
        ---help---
          If you say Y here and create a character special file /dev/rtc with
          major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -865,6 +899,7 @@ config SONYPI
 config TANBAC_TB0219
        tristate "TANBAC TB0219 base board support"
        depends TANBAC_TB022X
+       select GPIO_VR41XX
 
 menu "Ftape, the floppy tape device driver"
 
@@ -934,12 +969,36 @@ config MWAVE
 config SCx200_GPIO
        tristate "NatSemi SCx200 GPIO Support"
        depends on SCx200
+       select NSC_GPIO
        help
          Give userspace access to the GPIO pins on the National
          Semiconductor SCx200 processors.
 
          If compiled as a module, it will be called scx200_gpio.
 
+config PC8736x_GPIO
+       tristate "NatSemi PC8736x GPIO Support"
+       depends on X86
+       default SCx200_GPIO     # mostly N
+       select NSC_GPIO         # needed for support routines
+       help
+         Give userspace access to the GPIO pins on the National
+         Semiconductor PC-8736x (x=[03456]) SuperIO chip.  The chip
+         has multiple functional units, inc several managed by
+         hwmon/pc87360 driver.  Tested with PC-87366
+
+         If compiled as a module, it will be called pc8736x_gpio.
+
+config NSC_GPIO
+       tristate "NatSemi Base GPIO Support"
+       depends on X86_32
+       # selected by SCx200_GPIO and PC8736x_GPIO
+       # what about 2 selectors differing: m != y
+       help
+         Common support used (and needed) by scx200_gpio and
+         pc8736x_gpio drivers.  If those drivers are built as
+         modules, this one will be too, named nsc_gpio
+
 config CS5535_GPIO
        tristate "AMD CS5535/CS5536 GPIO (Geode Companion Device)"
        depends on X86_32