static int assign_irq_vector(int irq, cpumask_t mask);
+int first_system_vector = 0xfe;
+
+char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE};
+
#define __apicdebuginit __init
int sis_apic_bug; /* not actually supported, dummy for compile */
int nr_ioapic_registers[MAX_IO_APICS];
/* I/O APIC entries */
-struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
+struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
int nr_ioapics;
/* MP IRQ source entries */
-struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
/* # of MP IRQ source entries */
int mp_irq_entries;
+DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
+
/*
* Rough estimation of how many shared IRQs there are, can
* be changed anytime.
static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
{
return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
- + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK);
+ + (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK);
}
static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
int i;
for (i = 0; i < mp_irq_entries; i++)
- if (mp_irqs[i].mpc_irqtype == type &&
- (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid ||
- mp_irqs[i].mpc_dstapic == MP_APIC_ALL) &&
- mp_irqs[i].mpc_dstirq == pin)
+ if (mp_irqs[i].mp_irqtype == type &&
+ (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid ||
+ mp_irqs[i].mp_dstapic == MP_APIC_ALL) &&
+ mp_irqs[i].mp_dstirq == pin)
return i;
return -1;
int i;
for (i = 0; i < mp_irq_entries; i++) {
- int lbus = mp_irqs[i].mpc_srcbus;
+ int lbus = mp_irqs[i].mp_srcbus;
if (test_bit(lbus, mp_bus_not_pci) &&
- (mp_irqs[i].mpc_irqtype == type) &&
- (mp_irqs[i].mpc_srcbusirq == irq))
+ (mp_irqs[i].mp_irqtype == type) &&
+ (mp_irqs[i].mp_srcbusirq == irq))
- return mp_irqs[i].mpc_dstirq;
+ return mp_irqs[i].mp_dstirq;
}
return -1;
}
int i;
for (i = 0; i < mp_irq_entries; i++) {
- int lbus = mp_irqs[i].mpc_srcbus;
+ int lbus = mp_irqs[i].mp_srcbus;
if (test_bit(lbus, mp_bus_not_pci) &&
- (mp_irqs[i].mpc_irqtype == type) &&
- (mp_irqs[i].mpc_srcbusirq == irq))
+ (mp_irqs[i].mp_irqtype == type) &&
+ (mp_irqs[i].mp_srcbusirq == irq))
break;
}
if (i < mp_irq_entries) {
int apic;
for(apic = 0; apic < nr_ioapics; apic++) {
- if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
+ if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic)
return apic;
}
}
apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
bus, slot, pin);
- if (mp_bus_id_to_pci_bus[bus] == -1) {
+ if (test_bit(bus, mp_bus_not_pci)) {
apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
return -1;
}
for (i = 0; i < mp_irq_entries; i++) {
- int lbus = mp_irqs[i].mpc_srcbus;
+ int lbus = mp_irqs[i].mp_srcbus;
for (apic = 0; apic < nr_ioapics; apic++)
- if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic ||
- mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
+ if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic ||
+ mp_irqs[i].mp_dstapic == MP_APIC_ALL)
break;
if (!test_bit(lbus, mp_bus_not_pci) &&
- !mp_irqs[i].mpc_irqtype &&
+ !mp_irqs[i].mp_irqtype &&
(bus == lbus) &&
- (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
- int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq);
+ (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) {
+ int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq);
if (!(apic || IO_APIC_IRQ(irq)))
continue;
- if (pin == (mp_irqs[i].mpc_srcbusirq & 3))
+ if (pin == (mp_irqs[i].mp_srcbusirq & 3))
return irq;
/*
* Use the first all-but-pin matching entry as a
static int MPBIOS_polarity(int idx)
{
- int bus = mp_irqs[idx].mpc_srcbus;
+ int bus = mp_irqs[idx].mp_srcbus;
int polarity;
/*
* Determine IRQ line polarity (high active or low active):
*/
- switch (mp_irqs[idx].mpc_irqflag & 3)
+ switch (mp_irqs[idx].mp_irqflag & 3)
{
case 0: /* conforms, ie. bus-type dependent polarity */
if (test_bit(bus, mp_bus_not_pci))
static int MPBIOS_trigger(int idx)
{
- int bus = mp_irqs[idx].mpc_srcbus;
+ int bus = mp_irqs[idx].mp_srcbus;
int trigger;
/*
* Determine IRQ trigger mode (edge or level sensitive):
*/
- switch ((mp_irqs[idx].mpc_irqflag>>2) & 3)
+ switch ((mp_irqs[idx].mp_irqflag>>2) & 3)
{
case 0: /* conforms, ie. bus-type dependent */
if (test_bit(bus, mp_bus_not_pci))
static int pin_2_irq(int idx, int apic, int pin)
{
int irq, i;
- int bus = mp_irqs[idx].mpc_srcbus;
+ int bus = mp_irqs[idx].mp_srcbus;
/*
* Debugging check, we are in big trouble if this message pops up!
*/
- if (mp_irqs[idx].mpc_dstirq != pin)
+ if (mp_irqs[idx].mp_dstirq != pin)
printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
if (test_bit(bus, mp_bus_not_pci)) {
- irq = mp_irqs[idx].mpc_srcbusirq;
+ irq = mp_irqs[idx].mp_srcbusirq;
} else {
/*
* PCI IRQs are mapped in order
return 0;
}
- for_each_cpu_mask(cpu, mask) {
+ for_each_cpu_mask_nr(cpu, mask) {
cpumask_t domain, new_mask;
int new_cpu;
int vector, offset;
offset = current_offset;
next:
vector += 8;
- if (vector >= FIRST_SYSTEM_VECTOR) {
+ if (vector >= first_system_vector) {
/* If we run out of vectors on large boxen, must share them. */
offset = (offset + 1) % 8;
vector = FIRST_DEVICE_VECTOR + offset;
continue;
if (vector == IA32_SYSCALL_VECTOR)
goto next;
- for_each_cpu_mask(new_cpu, new_mask)
+ for_each_cpu_mask_nr(new_cpu, new_mask)
if (per_cpu(vector_irq, new_cpu)[vector] != -1)
goto next;
/* Found one! */
cfg->move_in_progress = 1;
cfg->old_domain = cfg->domain;
}
- for_each_cpu_mask(new_cpu, new_mask)
+ for_each_cpu_mask_nr(new_cpu, new_mask)
per_cpu(vector_irq, new_cpu)[vector] = irq;
cfg->vector = vector;
cfg->domain = domain;
vector = cfg->vector;
cpus_and(mask, cfg->domain, cpu_online_map);
- for_each_cpu_mask(cpu, mask)
+ for_each_cpu_mask_nr(cpu, mask)
per_cpu(vector_irq, cpu)[vector] = -1;
cfg->vector = 0;
cpus_clear(cfg->domain);
}
-void __setup_vector_irq(int cpu)
+static void __setup_vector_irq(int cpu)
{
/* Initialize vector_irq on a new cpu */
/* This function must be called with vector_lock held */
}
}
+void setup_vector_irq(int cpu)
+{
+ spin_lock(&vector_lock);
+ __setup_vector_irq(smp_processor_id());
+ spin_unlock(&vector_lock);
+}
+
static struct irq_chip ioapic_chip;
apic_printk(APIC_VERBOSE,KERN_DEBUG
"IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
"IRQ %d Mode:%i Active:%i)\n",
- apic, mp_ioapics[apic].mpc_apicid, pin, cfg->vector,
+ apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector,
irq, trigger, polarity);
/*
idx = find_irq_entry(apic,pin,mp_INT);
if (idx == -1) {
if (first_notcon) {
- apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mpc_apicid, pin);
+ apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mp_apicid, pin);
first_notcon = 0;
} else
- apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mpc_apicid, pin);
+ apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mp_apicid, pin);
continue;
}
if (!first_notcon) {
printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
for (i = 0; i < nr_ioapics; i++)
printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
- mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]);
+ mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]);
/*
* We are a bit conservative about what we expect. We have to
spin_unlock_irqrestore(&ioapic_lock, flags);
printk("\n");
- printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid);
+ printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid);
printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID);
void print_all_local_APICs (void)
{
- on_each_cpu(print_local_APIC, NULL, 1, 1);
+ on_each_cpu(print_local_APIC, NULL, 1);
}
void __apicdebuginit print_PIC(void)
}
}
-static void enable_lapic_irq (unsigned int irq)
+static void unmask_lapic_irq(unsigned int irq)
{
unsigned long v;
apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
}
-static void disable_lapic_irq (unsigned int irq)
+static void mask_lapic_irq(unsigned int irq)
{
unsigned long v;
ack_APIC_irq();
}
-static void end_lapic_irq (unsigned int i) { /* nothing */ }
-
-static struct hw_interrupt_type lapic_irq_type __read_mostly = {
- .name = "local-APIC",
- .typename = "local-APIC-edge",
- .startup = NULL, /* startup_irq() not used for IRQ0 */
- .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */
- .enable = enable_lapic_irq,
- .disable = disable_lapic_irq,
- .ack = ack_lapic_irq,
- .end = end_lapic_irq,
+static struct irq_chip lapic_chip __read_mostly = {
+ .name = "local-APIC",
+ .mask = mask_lapic_irq,
+ .unmask = unmask_lapic_irq,
+ .ack = ack_lapic_irq,
};
+static void lapic_register_intr(int irq)
+{
+ irq_desc[irq].status &= ~IRQ_LEVEL;
+ set_irq_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq,
+ "edge");
+}
+
static void __init setup_nmi(void)
{
/*
apic2 = apic1;
}
- replace_pin_at_irq(0, 0, 0, apic1, pin1);
- apic1 = 0;
- pin1 = 0;
- setup_timer_IRQ0_pin(apic1, pin1, cfg->vector);
-
if (pin1 != -1) {
/*
* Ok, does IRQ0 through the IOAPIC work?
}
unmask_IO_APIC_irq(0);
if (!no_timer_check && timer_irq_works()) {
- nmi_watchdog_default();
if (nmi_watchdog == NMI_IO_APIC) {
setup_nmi();
enable_8259A_irq(0);
if (timer_irq_works()) {
apic_printk(APIC_VERBOSE," works.\n");
timer_through_8259 = 1;
- nmi_watchdog_default();
if (nmi_watchdog == NMI_IO_APIC) {
disable_8259A_irq(0);
setup_nmi();
apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
- irq_desc[0].chip = &lapic_irq_type;
+ lapic_register_intr(0);
apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */
enable_8259A_irq(0);
__setup("no_timer_check", notimercheck);
/*
- *
- * IRQs that are handled by the PIC in the MPS IOAPIC case.
- * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ.
- * Linux doesn't really care, as it's not actually used
- * for any interrupt handling anyway.
+ * Traditionally ISA IRQ2 is the cascade IRQ, and is not available
+ * to devices. However there may be an I/O APIC pin available for
+ * this interrupt regardless. The pin may be left unconnected, but
+ * typically it will be reused as an ExtINT cascade interrupt for
+ * the master 8259A. In the MPS case such a pin will normally be
+ * reported as an ExtINT interrupt in the MP table. With ACPI
+ * there is no provision for ExtINT interrupts, and in the absence
+ * of an override it would be treated as an ordinary ISA I/O APIC
+ * interrupt, that is edge-triggered and unmasked by default. We
+ * used to do this, but it caused problems on some systems because
+ * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using
+ * the same ExtINT cascade interrupt to drive the local APIC of the
+ * bootstrap processor. Therefore we refrain from routing IRQ2 to
+ * the I/O APIC in all cases now. No actual device should request
+ * it anyway. --macro
*/
#define PIC_IRQS (1<<2)
* calling enable_IO_APIC() is moved to setup_local_APIC for BP
*/
- if (acpi_ioapic)
- io_apic_irqs = ~0; /* all IRQs go through IOAPIC */
- else
- io_apic_irqs = ~PIC_IRQS;
+ io_apic_irqs = ~PIC_IRQS;
apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
spin_lock_irqsave(&ioapic_lock, flags);
reg_00.raw = io_apic_read(dev->id, 0);
- if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) {
- reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid;
+ if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) {
+ reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid;
io_apic_write(dev->id, 0, reg_00.raw);
}
spin_unlock_irqrestore(&ioapic_lock, flags);
return -1;
for (i = 0; i < mp_irq_entries; i++)
- if (mp_irqs[i].mpc_irqtype == mp_INT &&
- mp_irqs[i].mpc_srcbusirq == bus_irq)
+ if (mp_irqs[i].mp_irqtype == mp_INT &&
+ mp_irqs[i].mp_srcbusirq == bus_irq)
break;
if (i >= mp_irq_entries)
return -1;
ioapic_res = ioapic_setup_resources();
for (i = 0; i < nr_ioapics; i++) {
if (smp_found_config) {
- ioapic_phys = mp_ioapics[i].mpc_apicaddr;
+ ioapic_phys = mp_ioapics[i].mp_apicaddr;
} else {
ioapic_phys = (unsigned long)
alloc_bootmem_pages(PAGE_SIZE);
git.openpandora.org / pandora-kernel.git / blobdiff