#include <acpi/acpi_bus.h>
#endif
#include <linux/bootmem.h>
+#include <linux/dmar.h>
#include <asm/idle.h>
#include <asm/io.h>
#include <asm/nmi.h>
#include <asm/msidef.h>
#include <asm/hypertransport.h>
+#include <asm/irq_remapping.h>
#include <mach_ipi.h>
#include <mach_apic.h>
*/
int nr_ioapic_registers[MAX_IO_APICS];
+/* I/O APIC RTE contents at the OS boot up */
+struct IO_APIC_route_entry *early_ioapic_entries[MAX_IO_APICS];
+
/* I/O APIC entries */
struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
int nr_ioapics;
pin = entry->pin;
if (pin == -1)
break;
- io_apic_write(apic, 0x11 + pin*2, dest);
+ /*
+ * With interrupt-remapping, destination information comes
+ * from interrupt-remapping table entry.
+ */
+ if (!irq_remapped(irq))
+ io_apic_write(apic, 0x11 + pin*2, dest);
reg = io_apic_read(apic, 0x10 + pin*2);
reg &= ~IO_APIC_REDIR_VECTOR_MASK;
reg |= vector;
clear_IO_APIC_pin(apic, pin);
}
+/*
+ * Saves and masks all the unmasked IO-APIC RTE's
+ */
+int save_mask_IO_APIC_setup(void)
+{
+ union IO_APIC_reg_01 reg_01;
+ unsigned long flags;
+ int apic, pin;
+
+ /*
+ * The number of IO-APIC IRQ registers (== #pins):
+ */
+ for (apic = 0; apic < nr_ioapics; apic++) {
+ spin_lock_irqsave(&ioapic_lock, flags);
+ reg_01.raw = io_apic_read(apic, 1);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ nr_ioapic_registers[apic] = reg_01.bits.entries+1;
+ }
+
+ for (apic = 0; apic < nr_ioapics; apic++) {
+ early_ioapic_entries[apic] =
+ kzalloc(sizeof(struct IO_APIC_route_entry) *
+ nr_ioapic_registers[apic], GFP_KERNEL);
+ if (!early_ioapic_entries[apic])
+ return -ENOMEM;
+ }
+
+ for (apic = 0; apic < nr_ioapics; apic++)
+ for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
+ struct IO_APIC_route_entry entry;
+
+ entry = early_ioapic_entries[apic][pin] =
+ ioapic_read_entry(apic, pin);
+ if (!entry.mask) {
+ entry.mask = 1;
+ ioapic_write_entry(apic, pin, entry);
+ }
+ }
+ return 0;
+}
+
+void restore_IO_APIC_setup(void)
+{
+ int apic, pin;
+
+ for (apic = 0; apic < nr_ioapics; apic++)
+ for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
+ ioapic_write_entry(apic, pin,
+ early_ioapic_entries[apic][pin]);
+}
+
+void reinit_intr_remapped_IO_APIC(int intr_remapping)
+{
+ /*
+ * for now plain restore of previous settings.
+ * TBD: In the case of OS enabling interrupt-remapping,
+ * IO-APIC RTE's need to be setup to point to interrupt-remapping
+ * table entries. for now, do a plain restore, and wait for
+ * the setup_IO_APIC_irqs() to do proper initialization.
+ */
+ restore_IO_APIC_setup();
+}
+
int skip_ioapic_setup;
int ioapic_force;
static struct irq_chip ioapic_chip;
+#ifdef CONFIG_INTR_REMAP
+static struct irq_chip ir_ioapic_chip;
+#endif
static void ioapic_register_intr(int irq, unsigned long trigger)
{
- if (trigger) {
+ if (trigger)
irq_desc[irq].status |= IRQ_LEVEL;
- set_irq_chip_and_handler_name(irq, &ioapic_chip,
- handle_fasteoi_irq, "fasteoi");
- } else {
+ else
irq_desc[irq].status &= ~IRQ_LEVEL;
+
+#ifdef CONFIG_INTR_REMAP
+ if (irq_remapped(irq)) {
+ irq_desc[irq].status |= IRQ_MOVE_PCNTXT;
+ if (trigger)
+ set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
+ handle_fasteoi_irq,
+ "fasteoi");
+ else
+ set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
+ handle_edge_irq, "edge");
+ return;
+ }
+#endif
+ if (trigger)
+ set_irq_chip_and_handler_name(irq, &ioapic_chip,
+ handle_fasteoi_irq,
+ "fasteoi");
+ else
set_irq_chip_and_handler_name(irq, &ioapic_chip,
handle_edge_irq, "edge");
+}
+
+static int setup_ioapic_entry(int apic, int irq,
+ struct IO_APIC_route_entry *entry,
+ unsigned int destination, int trigger,
+ int polarity, int vector)
+{
+ /*
+ * add it to the IO-APIC irq-routing table:
+ */
+ memset(entry,0,sizeof(*entry));
+
+#ifdef CONFIG_INTR_REMAP
+ if (intr_remapping_enabled) {
+ struct intel_iommu *iommu = map_ioapic_to_ir(apic);
+ struct irte irte;
+ struct IR_IO_APIC_route_entry *ir_entry =
+ (struct IR_IO_APIC_route_entry *) entry;
+ int index;
+
+ if (!iommu)
+ panic("No mapping iommu for ioapic %d\n", apic);
+
+ index = alloc_irte(iommu, irq, 1);
+ if (index < 0)
+ panic("Failed to allocate IRTE for ioapic %d\n", apic);
+
+ memset(&irte, 0, sizeof(irte));
+
+ irte.present = 1;
+ irte.dst_mode = INT_DEST_MODE;
+ irte.trigger_mode = trigger;
+ irte.dlvry_mode = INT_DELIVERY_MODE;
+ irte.vector = vector;
+ irte.dest_id = IRTE_DEST(destination);
+
+ modify_irte(irq, &irte);
+
+ ir_entry->index2 = (index >> 15) & 0x1;
+ ir_entry->zero = 0;
+ ir_entry->format = 1;
+ ir_entry->index = (index & 0x7fff);
+ } else
+#endif
+ {
+ entry->delivery_mode = INT_DELIVERY_MODE;
+ entry->dest_mode = INT_DEST_MODE;
+ entry->dest = destination;
}
+
+ entry->mask = 0; /* enable IRQ */
+ entry->trigger = trigger;
+ entry->polarity = polarity;
+ entry->vector = vector;
+
+ /* Mask level triggered irqs.
+ * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
+ */
+ if (trigger)
+ entry->mask = 1;
+ return 0;
}
static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq,
apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector,
irq, trigger, polarity);
- /*
- * add it to the IO-APIC irq-routing table:
- */
- memset(&entry,0,sizeof(entry));
- entry.delivery_mode = INT_DELIVERY_MODE;
- entry.dest_mode = INT_DEST_MODE;
- entry.dest = cpu_mask_to_apicid(mask);
- entry.mask = 0; /* enable IRQ */
- entry.trigger = trigger;
- entry.polarity = polarity;
- entry.vector = cfg->vector;
-
- /* Mask level triggered irqs.
- * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
- */
- if (trigger)
- entry.mask = 1;
+ if (setup_ioapic_entry(mp_ioapics[apic].mp_apicid, irq, &entry,
+ cpu_mask_to_apicid(mask), trigger, polarity,
+ cfg->vector)) {
+ printk("Failed to setup ioapic entry for ioapic %d, pin %d\n",
+ mp_ioapics[apic].mp_apicid, pin);
+ __clear_irq_vector(irq);
+ return;
+ }
ioapic_register_intr(irq, trigger);
if (irq < 16)
{
struct IO_APIC_route_entry entry;
+ if (intr_remapping_enabled)
+ return;
+
memset(&entry, 0, sizeof(entry));
/*
void __apicdebuginit print_local_APIC(void * dummy)
{
unsigned int v, ver, maxlvt;
+ unsigned long icr;
if (apic_verbosity == APIC_QUIET)
return;
printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
smp_processor_id(), hard_smp_processor_id());
v = apic_read(APIC_ID);
- printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(read_apic_id()));
+ printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, read_apic_id());
v = apic_read(APIC_LVR);
printk(KERN_INFO "... APIC VERSION: %08x\n", v);
ver = GET_APIC_VERSION(v);
v = apic_read(APIC_ESR);
printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
- v = apic_read(APIC_ICR);
- printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
- v = apic_read(APIC_ICR2);
- printk(KERN_DEBUG "... APIC ICR2: %08x\n", v);
+ icr = apic_icr_read();
+ printk(KERN_DEBUG "... APIC ICR: %08x\n", icr);
+ printk(KERN_DEBUG "... APIC ICR2: %08x\n", icr >> 32);
v = apic_read(APIC_LVTT);
printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
entry.dest_mode = 0; /* Physical */
entry.delivery_mode = dest_ExtINT; /* ExtInt */
entry.vector = 0;
- entry.dest = GET_APIC_ID(read_apic_id());
+ entry.dest = read_apic_id();
/*
* Add it to the IO-APIC irq-routing table:
*/
#ifdef CONFIG_SMP
+
+#ifdef CONFIG_INTR_REMAP
+static void ir_irq_migration(struct work_struct *work);
+
+static DECLARE_DELAYED_WORK(ir_migration_work, ir_irq_migration);
+
+/*
+ * Migrate the IO-APIC irq in the presence of intr-remapping.
+ *
+ * For edge triggered, irq migration is a simple atomic update(of vector
+ * and cpu destination) of IRTE and flush the hardware cache.
+ *
+ * For level triggered, we need to modify the io-apic RTE aswell with the update
+ * vector information, along with modifying IRTE with vector and destination.
+ * So irq migration for level triggered is little bit more complex compared to
+ * edge triggered migration. But the good news is, we use the same algorithm
+ * for level triggered migration as we have today, only difference being,
+ * we now initiate the irq migration from process context instead of the
+ * interrupt context.
+ *
+ * In future, when we do a directed EOI (combined with cpu EOI broadcast
+ * suppression) to the IO-APIC, level triggered irq migration will also be
+ * as simple as edge triggered migration and we can do the irq migration
+ * with a simple atomic update to IO-APIC RTE.
+ */
+static void migrate_ioapic_irq(int irq, cpumask_t mask)
+{
+ struct irq_cfg *cfg = irq_cfg + irq;
+ struct irq_desc *desc = irq_desc + irq;
+ cpumask_t tmp, cleanup_mask;
+ struct irte irte;
+ int modify_ioapic_rte = desc->status & IRQ_LEVEL;
+ unsigned int dest;
+ unsigned long flags;
+
+ cpus_and(tmp, mask, cpu_online_map);
+ if (cpus_empty(tmp))
+ return;
+
+ if (get_irte(irq, &irte))
+ return;
+
+ if (assign_irq_vector(irq, mask))
+ return;
+
+ cpus_and(tmp, cfg->domain, mask);
+ dest = cpu_mask_to_apicid(tmp);
+
+ if (modify_ioapic_rte) {
+ spin_lock_irqsave(&ioapic_lock, flags);
+ __target_IO_APIC_irq(irq, dest, cfg->vector);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ }
+
+ irte.vector = cfg->vector;
+ irte.dest_id = IRTE_DEST(dest);
+
+ /*
+ * Modified the IRTE and flushes the Interrupt entry cache.
+ */
+ modify_irte(irq, &irte);
+
+ if (cfg->move_in_progress) {
+ cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
+ cfg->move_cleanup_count = cpus_weight(cleanup_mask);
+ send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
+ cfg->move_in_progress = 0;
+ }
+
+ irq_desc[irq].affinity = mask;
+}
+
+static int migrate_irq_remapped_level(int irq)
+{
+ int ret = -1;
+
+ mask_IO_APIC_irq(irq);
+
+ if (io_apic_level_ack_pending(irq)) {
+ /*
+ * Interrupt in progress. Migrating irq now will change the
+ * vector information in the IO-APIC RTE and that will confuse
+ * the EOI broadcast performed by cpu.
+ * So, delay the irq migration to the next instance.
+ */
+ schedule_delayed_work(&ir_migration_work, 1);
+ goto unmask;
+ }
+
+ /* everthing is clear. we have right of way */
+ migrate_ioapic_irq(irq, irq_desc[irq].pending_mask);
+
+ ret = 0;
+ irq_desc[irq].status &= ~IRQ_MOVE_PENDING;
+ cpus_clear(irq_desc[irq].pending_mask);
+
+unmask:
+ unmask_IO_APIC_irq(irq);
+ return ret;
+}
+
+static void ir_irq_migration(struct work_struct *work)
+{
+ int irq;
+
+ for (irq = 0; irq < NR_IRQS; irq++) {
+ struct irq_desc *desc = irq_desc + irq;
+ if (desc->status & IRQ_MOVE_PENDING) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ if (!desc->chip->set_affinity ||
+ !(desc->status & IRQ_MOVE_PENDING)) {
+ desc->status &= ~IRQ_MOVE_PENDING;
+ spin_unlock_irqrestore(&desc->lock, flags);
+ continue;
+ }
+
+ desc->chip->set_affinity(irq,
+ irq_desc[irq].pending_mask);
+ spin_unlock_irqrestore(&desc->lock, flags);
+ }
+ }
+}
+
+/*
+ * Migrates the IRQ destination in the process context.
+ */
+static void set_ir_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
+{
+ if (irq_desc[irq].status & IRQ_LEVEL) {
+ irq_desc[irq].status |= IRQ_MOVE_PENDING;
+ irq_desc[irq].pending_mask = mask;
+ migrate_irq_remapped_level(irq);
+ return;
+ }
+
+ migrate_ioapic_irq(irq, mask);
+}
+#endif
+
asmlinkage void smp_irq_move_cleanup_interrupt(void)
{
unsigned vector, me;
#else
static inline void irq_complete_move(unsigned int irq) {}
#endif
+#ifdef CONFIG_INTR_REMAP
+static void ack_x2apic_level(unsigned int irq)
+{
+ ack_x2APIC_irq();
+}
+
+static void ack_x2apic_edge(unsigned int irq)
+{
+ ack_x2APIC_irq();
+}
+#endif
static void ack_apic_edge(unsigned int irq)
{
.retrigger = ioapic_retrigger_irq,
};
+#ifdef CONFIG_INTR_REMAP
+static struct irq_chip ir_ioapic_chip __read_mostly = {
+ .name = "IR-IO-APIC",
+ .startup = startup_ioapic_irq,
+ .mask = mask_IO_APIC_irq,
+ .unmask = unmask_IO_APIC_irq,
+ .ack = ack_x2apic_edge,
+ .eoi = ack_x2apic_level,
+#ifdef CONFIG_SMP
+ .set_affinity = set_ir_ioapic_affinity_irq,
+#endif
+ .retrigger = ioapic_retrigger_irq,
+};
+#endif
+
static inline void init_IO_APIC_traps(void)
{
int irq;
* 8259A.
*/
if (pin1 == -1) {
+ if (intr_remapping_enabled)
+ panic("BIOS bug: timer not connected to IO-APIC");
pin1 = pin2;
apic1 = apic2;
no_pin1 = 1;
clear_IO_APIC_pin(0, pin1);
goto out;
}
+ if (intr_remapping_enabled)
+ panic("timer doesn't work through Interrupt-remapped IO-APIC");
clear_IO_APIC_pin(apic1, pin1);
if (!no_pin1)
apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: "
dynamic_irq_cleanup(irq);
+#ifdef CONFIG_INTR_REMAP
+ free_irte(irq);
+#endif
spin_lock_irqsave(&vector_lock, flags);
__clear_irq_vector(irq);
spin_unlock_irqrestore(&vector_lock, flags);
tmp = TARGET_CPUS;
err = assign_irq_vector(irq, tmp);
- if (!err) {
- cpus_and(tmp, cfg->domain, tmp);
- dest = cpu_mask_to_apicid(tmp);
+ if (err)
+ return err;
+
+ cpus_and(tmp, cfg->domain, tmp);
+ dest = cpu_mask_to_apicid(tmp);
+
+#ifdef CONFIG_INTR_REMAP
+ if (irq_remapped(irq)) {
+ struct irte irte;
+ int ir_index;
+ u16 sub_handle;
+
+ ir_index = map_irq_to_irte_handle(irq, &sub_handle);
+ BUG_ON(ir_index == -1);
+
+ memset (&irte, 0, sizeof(irte));
+
+ irte.present = 1;
+ irte.dst_mode = INT_DEST_MODE;
+ irte.trigger_mode = 0; /* edge */
+ irte.dlvry_mode = INT_DELIVERY_MODE;
+ irte.vector = cfg->vector;
+ irte.dest_id = IRTE_DEST(dest);
+
+ modify_irte(irq, &irte);
+ msg->address_hi = MSI_ADDR_BASE_HI;
+ msg->data = sub_handle;
+ msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
+ MSI_ADDR_IR_SHV |
+ MSI_ADDR_IR_INDEX1(ir_index) |
+ MSI_ADDR_IR_INDEX2(ir_index);
+ } else
+#endif
+ {
msg->address_hi = MSI_ADDR_BASE_HI;
msg->address_lo =
MSI_ADDR_BASE_LO |
write_msi_msg(irq, &msg);
irq_desc[irq].affinity = mask;
}
+
+#ifdef CONFIG_INTR_REMAP
+/*
+ * Migrate the MSI irq to another cpumask. This migration is
+ * done in the process context using interrupt-remapping hardware.
+ */
+static void ir_set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
+{
+ struct irq_cfg *cfg = irq_cfg + irq;
+ unsigned int dest;
+ cpumask_t tmp, cleanup_mask;
+ struct irte irte;
+
+ cpus_and(tmp, mask, cpu_online_map);
+ if (cpus_empty(tmp))
+ return;
+
+ if (get_irte(irq, &irte))
+ return;
+
+ if (assign_irq_vector(irq, mask))
+ return;
+
+ cpus_and(tmp, cfg->domain, mask);
+ dest = cpu_mask_to_apicid(tmp);
+
+ irte.vector = cfg->vector;
+ irte.dest_id = IRTE_DEST(dest);
+
+ /*
+ * atomically update the IRTE with the new destination and vector.
+ */
+ modify_irte(irq, &irte);
+
+ /*
+ * After this point, all the interrupts will start arriving
+ * at the new destination. So, time to cleanup the previous
+ * vector allocation.
+ */
+ if (cfg->move_in_progress) {
+ cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
+ cfg->move_cleanup_count = cpus_weight(cleanup_mask);
+ send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
+ cfg->move_in_progress = 0;
+ }
+
+ irq_desc[irq].affinity = mask;
+}
+#endif
#endif /* CONFIG_SMP */
/*
.retrigger = ioapic_retrigger_irq,
};
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+#ifdef CONFIG_INTR_REMAP
+static struct irq_chip msi_ir_chip = {
+ .name = "IR-PCI-MSI",
+ .unmask = unmask_msi_irq,
+ .mask = mask_msi_irq,
+ .ack = ack_x2apic_edge,
+#ifdef CONFIG_SMP
+ .set_affinity = ir_set_msi_irq_affinity,
+#endif
+ .retrigger = ioapic_retrigger_irq,
+};
+
+/*
+ * Map the PCI dev to the corresponding remapping hardware unit
+ * and allocate 'nvec' consecutive interrupt-remapping table entries
+ * in it.
+ */
+static int msi_alloc_irte(struct pci_dev *dev, int irq, int nvec)
+{
+ struct intel_iommu *iommu;
+ int index;
+
+ iommu = map_dev_to_ir(dev);
+ if (!iommu) {
+ printk(KERN_ERR
+ "Unable to map PCI %s to iommu\n", pci_name(dev));
+ return -ENOENT;
+ }
+
+ index = alloc_irte(iommu, irq, nvec);
+ if (index < 0) {
+ printk(KERN_ERR
+ "Unable to allocate %d IRTE for PCI %s\n", nvec,
+ pci_name(dev));
+ return -ENOSPC;
+ }
+ return index;
+}
+#endif
+
+static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc, int irq)
{
+ int ret;
struct msi_msg msg;
+
+ ret = msi_compose_msg(dev, irq, &msg);
+ if (ret < 0)
+ return ret;
+
+ set_irq_msi(irq, desc);
+ write_msi_msg(irq, &msg);
+
+#ifdef CONFIG_INTR_REMAP
+ if (irq_remapped(irq)) {
+ struct irq_desc *desc = irq_desc + irq;
+ /*
+ * irq migration in process context
+ */
+ desc->status |= IRQ_MOVE_PCNTXT;
+ set_irq_chip_and_handler_name(irq, &msi_ir_chip, handle_edge_irq, "edge");
+ } else
+#endif
+ set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
+
+ return 0;
+}
+
+int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+{
int irq, ret;
+
irq = create_irq();
if (irq < 0)
return irq;
- ret = msi_compose_msg(dev, irq, &msg);
+#ifdef CONFIG_INTR_REMAP
+ if (!intr_remapping_enabled)
+ goto no_ir;
+
+ ret = msi_alloc_irte(dev, irq, 1);
+ if (ret < 0)
+ goto error;
+no_ir:
+#endif
+ ret = setup_msi_irq(dev, desc, irq);
if (ret < 0) {
destroy_irq(irq);
return ret;
}
+ return 0;
- set_irq_msi(irq, desc);
- write_msi_msg(irq, &msg);
+#ifdef CONFIG_INTR_REMAP
+error:
+ destroy_irq(irq);
+ return ret;
+#endif
+}
- set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
+int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+ int irq, ret, sub_handle;
+ struct msi_desc *desc;
+#ifdef CONFIG_INTR_REMAP
+ struct intel_iommu *iommu = 0;
+ int index = 0;
+#endif
+ sub_handle = 0;
+ list_for_each_entry(desc, &dev->msi_list, list) {
+ irq = create_irq();
+ if (irq < 0)
+ return irq;
+#ifdef CONFIG_INTR_REMAP
+ if (!intr_remapping_enabled)
+ goto no_ir;
+
+ if (!sub_handle) {
+ /*
+ * allocate the consecutive block of IRTE's
+ * for 'nvec'
+ */
+ index = msi_alloc_irte(dev, irq, nvec);
+ if (index < 0) {
+ ret = index;
+ goto error;
+ }
+ } else {
+ iommu = map_dev_to_ir(dev);
+ if (!iommu) {
+ ret = -ENOENT;
+ goto error;
+ }
+ /*
+ * setup the mapping between the irq and the IRTE
+ * base index, the sub_handle pointing to the
+ * appropriate interrupt remap table entry.
+ */
+ set_irte_irq(irq, iommu, index, sub_handle);
+ }
+no_ir:
+#endif
+ ret = setup_msi_irq(dev, desc, irq);
+ if (ret < 0)
+ goto error;
+ sub_handle++;
+ }
return 0;
+
+error:
+ destroy_irq(irq);
+ return ret;
}
void arch_teardown_msi_irq(unsigned int irq)
setup_IO_APIC_irq(ioapic, pin, irq,
irq_trigger(irq_entry),
irq_polarity(irq_entry));
+#ifdef CONFIG_INTR_REMAP
+ else if (intr_remapping_enabled)
+ set_ir_ioapic_affinity_irq(irq, TARGET_CPUS);
+#endif
else
set_ioapic_affinity_irq(irq, TARGET_CPUS);
}
git.openpandora.org / pandora-kernel.git / blobdiff