#include <linux/init.h>
#include <linux/cpu.h>
#include <linux/dmi.h>
-#include <linux/nmi.h>
#include <linux/smp.h>
#include <linux/mm.h>
#include <asm/mtrr.h>
#include <asm/smp.h>
#include <asm/mce.h>
-#include <asm/kvm_para.h>
#include <asm/tsc.h>
+#include <asm/hypervisor.h>
unsigned int num_processors;
reserved = reserve_eilvt_offset(offset, new);
if (reserved != new) {
- pr_err(FW_BUG "cpu %d, try to setup vector 0x%x, but "
- "vector 0x%x was already reserved by another core, "
- "APIC%lX=0x%x\n",
- smp_processor_id(), new, reserved, reg, old);
+ pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for "
+ "vector 0x%x, but the register is already in use for "
+ "vector 0x%x on another cpu\n",
+ smp_processor_id(), reg, offset, new, reserved);
return -EINVAL;
}
if (!eilvt_entry_is_changeable(old, new)) {
- pr_err(FW_BUG "cpu %d, try to setup vector 0x%x but "
- "register already in use, APIC%lX=0x%x\n",
- smp_processor_id(), new, reg, old);
+ pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for "
+ "vector 0x%x, but the register is already in use for "
+ "vector 0x%x on this cpu\n",
+ smp_processor_id(), reg, offset, new, old);
return -EBUSY;
}
{
struct clock_event_device *levt = &__get_cpu_var(lapic_events);
- if (cpu_has(¤t_cpu_data, X86_FEATURE_ARAT)) {
+ if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_ARAT)) {
lapic_clockevent.features &= ~CLOCK_EVT_FEAT_C3STOP;
/* Make LAPIC timer preferrable over percpu HPET */
lapic_clockevent.rating = 150;
* PIT/HPET going. Otherwise register lapic as a dummy
* device.
*/
- if (nmi_watchdog != NMI_IO_APIC)
- lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
- else
- pr_warning("APIC timer registered as dummy,"
- " due to nmi_watchdog=%d!\n", nmi_watchdog);
+ lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
/* Setup the lapic or request the broadcast */
setup_APIC_timer();
oldvalue, value);
}
-
/**
* setup_local_APIC - setup the local APIC
+ *
+ * Used to setup local APIC while initializing BSP or bringin up APs.
+ * Always called with preemption disabled.
*/
void __cpuinit setup_local_APIC(void)
{
+ int cpu = smp_processor_id();
unsigned int value, queued;
int i, j, acked = 0;
unsigned long long tsc = 0, ntsc;
#endif
perf_events_lapic_init();
- preempt_disable();
-
/*
* Double-check whether this APIC is really registered.
* This is meaningless in clustered apic mode, so we skip it.
* TODO: set up through-local-APIC from through-I/O-APIC? --macro
*/
value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
- if (!smp_processor_id() && (pic_mode || !value)) {
+ if (!cpu && (pic_mode || !value)) {
value = APIC_DM_EXTINT;
- apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n",
- smp_processor_id());
+ apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", cpu);
} else {
value = APIC_DM_EXTINT | APIC_LVT_MASKED;
- apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n",
- smp_processor_id());
+ apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", cpu);
}
apic_write(APIC_LVT0, value);
/*
* only the BP should see the LINT1 NMI signal, obviously.
*/
- if (!smp_processor_id())
+ if (!cpu)
value = APIC_DM_NMI;
else
value = APIC_DM_NMI | APIC_LVT_MASKED;
value |= APIC_LVT_LEVEL_TRIGGER;
apic_write(APIC_LVT1, value);
- preempt_enable();
-
#ifdef CONFIG_X86_MCE_INTEL
/* Recheck CMCI information after local APIC is up on CPU #0 */
- if (smp_processor_id() == 0)
+ if (!cpu)
cmci_recheck();
#endif
}
}
#endif
- setup_apic_nmi_watchdog(NULL);
apic_pm_activate();
/*
/* IR is required if there is APIC ID > 255 even when running
* under KVM
*/
- if (max_physical_apicid > 255 || !kvm_para_available())
+ if (max_physical_apicid > 255 ||
+ !hypervisor_x2apic_available())
goto nox2apic;
/*
* without IR all CPUs can be addressed by IOAPIC/MSI
return 0;
}
#else
+
+static int apic_verify(void)
+{
+ u32 features, h, l;
+
+ /*
+ * The APIC feature bit should now be enabled
+ * in `cpuid'
+ */
+ features = cpuid_edx(1);
+ if (!(features & (1 << X86_FEATURE_APIC))) {
+ pr_warning("Could not enable APIC!\n");
+ return -1;
+ }
+ set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+ mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+
+ /* The BIOS may have set up the APIC at some other address */
+ rdmsr(MSR_IA32_APICBASE, l, h);
+ if (l & MSR_IA32_APICBASE_ENABLE)
+ mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
+
+ pr_info("Found and enabled local APIC!\n");
+ return 0;
+}
+
+int apic_force_enable(void)
+{
+ u32 h, l;
+
+ if (disable_apic)
+ return -1;
+
+ /*
+ * Some BIOSes disable the local APIC in the APIC_BASE
+ * MSR. This can only be done in software for Intel P6 or later
+ * and AMD K7 (Model > 1) or later.
+ */
+ rdmsr(MSR_IA32_APICBASE, l, h);
+ if (!(l & MSR_IA32_APICBASE_ENABLE)) {
+ pr_info("Local APIC disabled by BIOS -- reenabling.\n");
+ l &= ~MSR_IA32_APICBASE_BASE;
+ l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
+ wrmsr(MSR_IA32_APICBASE, l, h);
+ enabled_via_apicbase = 1;
+ }
+ return apic_verify();
+}
+
/*
* Detect and initialize APIC
*/
static int __init detect_init_APIC(void)
{
- u32 h, l, features;
-
/* Disabled by kernel option? */
if (disable_apic)
return -1;
"you can enable it with \"lapic\"\n");
return -1;
}
- /*
- * Some BIOSes disable the local APIC in the APIC_BASE
- * MSR. This can only be done in software for Intel P6 or later
- * and AMD K7 (Model > 1) or later.
- */
- rdmsr(MSR_IA32_APICBASE, l, h);
- if (!(l & MSR_IA32_APICBASE_ENABLE)) {
- pr_info("Local APIC disabled by BIOS -- reenabling.\n");
- l &= ~MSR_IA32_APICBASE_BASE;
- l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
- wrmsr(MSR_IA32_APICBASE, l, h);
- enabled_via_apicbase = 1;
- }
- }
- /*
- * The APIC feature bit should now be enabled
- * in `cpuid'
- */
- features = cpuid_edx(1);
- if (!(features & (1 << X86_FEATURE_APIC))) {
- pr_warning("Could not enable APIC!\n");
- return -1;
+ if (apic_force_enable())
+ return -1;
+ } else {
+ if (apic_verify())
+ return -1;
}
- set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
- mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-
- /* The BIOS may have set up the APIC at some other address */
- rdmsr(MSR_IA32_APICBASE, l, h);
- if (l & MSR_IA32_APICBASE_ENABLE)
- mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
-
- pr_info("Found and enabled local APIC!\n");
apic_pm_activate();
}
#endif
-#ifdef CONFIG_X86_64
-void __init early_init_lapic_mapping(void)
-{
- /*
- * If no local APIC can be found then go out
- * : it means there is no mpatable and MADT
- */
- if (!smp_found_config)
- return;
-
- set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
- apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
- APIC_BASE, mp_lapic_addr);
-
- /*
- * Fetch the APIC ID of the BSP in case we have a
- * default configuration (or the MP table is broken).
- */
- boot_cpu_physical_apicid = read_apic_id();
-}
-#endif
-
/**
* init_apic_mappings - initialize APIC mappings
*/
* acpi_register_lapic_address()
*/
if (!acpi_lapic && !smp_found_config)
- set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
-
- apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n",
- APIC_BASE, apic_phys);
+ register_lapic_address(apic_phys);
}
/*
}
}
+void __init register_lapic_address(unsigned long address)
+{
+ mp_lapic_addr = address;
+
+ if (!x2apic_mode) {
+ set_fixmap_nocache(FIX_APIC_BASE, address);
+ apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
+ APIC_BASE, mp_lapic_addr);
+ }
+ if (boot_cpu_physical_apicid == -1U) {
+ boot_cpu_physical_apicid = read_apic_id();
+ apic_version[boot_cpu_physical_apicid] =
+ GET_APIC_VERSION(apic_read(APIC_LVR));
+ }
+}
+
/*
* This initializes the IO-APIC and APIC hardware if this is
* a UP kernel.
*/
-int apic_version[MAX_APICS];
+int apic_version[MAX_LOCAL_APIC];
int __init APIC_init_uniprocessor(void)
{
setup_IO_APIC();
else {
nr_ioapics = 0;
- localise_nmi_watchdog();
}
-#else
- localise_nmi_watchdog();
#endif
x86_init.timers.setup_percpu_clockev();
-#ifdef CONFIG_X86_64
- check_nmi_watchdog();
-#endif
-
return 0;
}
git.openpandora.org / pandora-kernel.git / blobdiff