Merge branch 'core-hweight-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...

[pandora-kernel.git] / arch / x86 / Kconfig

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 89d8c54..a2d3a5f 100644 (file)
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -53,11 +53,15 @@ config X86
        select HAVE_KERNEL_LZMA
        select HAVE_KERNEL_LZO
        select HAVE_HW_BREAKPOINT
+       select HAVE_MIXED_BREAKPOINTS_REGS
        select PERF_EVENTS
        select ANON_INODES
        select HAVE_ARCH_KMEMCHECK
        select HAVE_USER_RETURN_NOTIFIER
 
+config INSTRUCTION_DECODER
+       def_bool (KPROBES || PERF_EVENTS)
+
 config OUTPUT_FORMAT
        string
        default "elf32-i386" if X86_32
@@ -197,20 +201,17 @@ config HAVE_INTEL_TXT
 
 # Use the generic interrupt handling code in kernel/irq/:
 config GENERIC_HARDIRQS
-       bool
-       default y
+       def_bool y
 
 config GENERIC_HARDIRQS_NO__DO_IRQ
        def_bool y
 
 config GENERIC_IRQ_PROBE
-       bool
-       default y
+       def_bool y
 
 config GENERIC_PENDING_IRQ
-       bool
+       def_bool y
        depends on GENERIC_HARDIRQS && SMP
-       default y
 
 config USE_GENERIC_SMP_HELPERS
        def_bool y
@@ -225,14 +226,12 @@ config X86_64_SMP
        depends on X86_64 && SMP
 
 config X86_HT
-       bool
+       def_bool y
        depends on SMP
-       default y
 
 config X86_TRAMPOLINE
-       bool
+       def_bool y
        depends on SMP || (64BIT && ACPI_SLEEP)
-       default y
 
 config X86_32_LAZY_GS
        def_bool y
@@ -452,7 +451,7 @@ config X86_NUMAQ
          firmware with - send email to <Martin.Bligh@us.ibm.com>.
 
 config X86_SUPPORTS_MEMORY_FAILURE
-       bool
+       def_bool y
        # MCE code calls memory_failure():
        depends on X86_MCE
        # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
@@ -460,7 +459,6 @@ config X86_SUPPORTS_MEMORY_FAILURE
        # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
        depends on X86_64 || !SPARSEMEM
        select ARCH_SUPPORTS_MEMORY_FAILURE
-       default y
 
 config X86_VISWS
        bool "SGI 320/540 (Visual Workstation)"
@@ -575,7 +573,6 @@ config PARAVIRT_SPINLOCKS
 
 config PARAVIRT_CLOCK
        bool
-       default n
 
 endif
 
@@ -754,7 +751,6 @@ config MAXSMP
        bool "Configure Maximum number of SMP Processors and NUMA Nodes"
        depends on X86_64 && SMP && DEBUG_KERNEL && EXPERIMENTAL
        select CPUMASK_OFFSTACK
-       default n
        ---help---
          Configure maximum number of CPUS and NUMA Nodes for this architecture.
          If unsure, say N.
@@ -834,7 +830,6 @@ config X86_VISWS_APIC
 
 config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
        bool "Reroute for broken boot IRQs"
-       default n
        depends on X86_IO_APIC
        ---help---
          This option enables a workaround that fixes a source of
@@ -881,9 +876,8 @@ config X86_MCE_AMD
           the DRAM Error Threshold.
 
 config X86_ANCIENT_MCE
-       def_bool n
+       bool "Support for old Pentium 5 / WinChip machine checks"
        depends on X86_32 && X86_MCE
-       prompt "Support for old Pentium 5 / WinChip machine checks"
        ---help---
          Include support for machine check handling on old Pentium 5 or WinChip
          systems. These typically need to be enabled explicitely on the command
@@ -891,8 +885,7 @@ config X86_ANCIENT_MCE
 
 config X86_MCE_THRESHOLD
        depends on X86_MCE_AMD || X86_MCE_INTEL
-       bool
-       default y
+       def_bool y
 
 config X86_MCE_INJECT
        depends on X86_MCE
@@ -1031,8 +1024,8 @@ config X86_CPUID
 
 choice
        prompt "High Memory Support"
-       default HIGHMEM4G if !X86_NUMAQ
        default HIGHMEM64G if X86_NUMAQ
+       default HIGHMEM4G
        depends on X86_32
 
 config NOHIGHMEM
@@ -1221,8 +1214,8 @@ config NUMA_EMU
 
 config NODES_SHIFT
        int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
-       range 1 9
-       default "9" if MAXSMP
+       range 1 10
+       default "10" if MAXSMP
        default "6" if X86_64
        default "4" if X86_NUMAQ
        default "3"
@@ -1290,7 +1283,7 @@ source "mm/Kconfig"
 
 config HIGHPTE
        bool "Allocate 3rd-level pagetables from highmem"
-       depends on X86_32 && (HIGHMEM4G || HIGHMEM64G)
+       depends on HIGHMEM
        ---help---
          The VM uses one page table entry for each page of physical memory.
          For systems with a lot of RAM, this can be wasteful of precious
@@ -1374,8 +1367,7 @@ config MATH_EMULATION
          kernel, it won't hurt.
 
 config MTRR
-       bool
-       default y
+       def_bool y
        prompt "MTRR (Memory Type Range Register) support" if EMBEDDED
        ---help---
          On Intel P6 family processors (Pentium Pro, Pentium II and later)
@@ -1441,8 +1433,7 @@ config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
          mtrr_spare_reg_nr=N on the kernel command line.
 
 config X86_PAT
-       bool
-       default y
+       def_bool y
        prompt "x86 PAT support" if EMBEDDED
        depends on MTRR
        ---help---
@@ -1610,8 +1601,7 @@ config X86_NEED_RELOCS
        depends on X86_32 && RELOCATABLE
 
 config PHYSICAL_ALIGN
-       hex
-       prompt "Alignment value to which kernel should be aligned" if X86_32
+       hex "Alignment value to which kernel should be aligned" if X86_32
        default "0x1000000"
        range 0x2000 0x1000000
        ---help---
@@ -1658,7 +1648,6 @@ config COMPAT_VDSO
 
 config CMDLINE_BOOL
        bool "Built-in kernel command line"
-       default n
        ---help---
          Allow for specifying boot arguments to the kernel at
          build time.  On some systems (e.g. embedded ones), it is
@@ -1692,7 +1681,6 @@ config CMDLINE
 
 config CMDLINE_OVERRIDE
        bool "Built-in command line overrides boot loader arguments"
-       default n
        depends on CMDLINE_BOOL
        ---help---
          Set this option to 'Y' to have the kernel ignore the boot loader
@@ -1728,8 +1716,7 @@ source "drivers/acpi/Kconfig"
 source "drivers/sfi/Kconfig"
 
 config X86_APM_BOOT
-       bool
-       default y
+       def_bool y
        depends on APM || APM_MODULE
 
 menuconfig APM
@@ -1958,8 +1945,7 @@ config DMAR_DEFAULT_ON
          experimental.
 
 config DMAR_BROKEN_GFX_WA
-       def_bool n
-       prompt "Workaround broken graphics drivers (going away soon)"
+       bool "Workaround broken graphics drivers (going away soon)"
        depends on DMAR && BROKEN
        ---help---
          Current Graphics drivers tend to use physical address
@@ -2057,7 +2043,6 @@ config SCx200HR_TIMER
 config OLPC
        bool "One Laptop Per Child support"
        select GPIOLIB
-       default n
        ---help---
          Add support for detecting the unique features of the OLPC
          XO hardware.