+/*
+ * The MTU has a separate, rather complex muxing setup
+ * with alternative parents (peripheral cluster or
+ * ULP or fixed 32768 Hz) depending on settings
+ */
+static unsigned long clk_mtu_get_rate(struct clk *clk)
+{
+ void __iomem *addr = __io_address(U8500_PRCMU_BASE)
+ + PRCM_TCR;
+ u32 tcr = readl(addr);
+ int mtu = (int) clk->data;
+ /*
+ * One of these is selected eventually
+ * TODO: Replace the constant with a reference
+ * to the ULP source once this is modeled.
+ */
+ unsigned long clk32k = 32768;
+ unsigned long mturate;
+ unsigned long retclk;
+
+ /* Get the rate from the parent as a default */
+ if (clk->parent_periph)
+ mturate = clk_get_rate(clk->parent_periph);
+ else if (clk->parent_cluster)
+ mturate = clk_get_rate(clk->parent_cluster);
+ else
+ /* We need to be connected SOMEWHERE */
+ BUG();
+
+ /*
+ * Are we in doze mode?
+ * In this mode the parent peripheral or the fixed 32768 Hz
+ * clock is fed into the block.
+ */
+ if (!(tcr & PRCM_TCR_DOZE_MODE)) {
+ /*
+ * Here we're using the clock input from the APE ULP
+ * clock domain. But first: are the timers stopped?
+ */
+ if (tcr & PRCM_TCR_STOPPED) {
+ clk32k = 0;
+ mturate = 0;
+ } else {
+ /* Else default mode: 0 and 2.4 MHz */
+ clk32k = 0;
+ if (cpu_is_u5500())
+ /* DB5500 divides by 8 */
+ mturate /= 8;
+ else if (cpu_is_u8500ed()) {
+ /*
+ * This clocking setting must not be used
+ * in the ED chip, it is simply not
+ * connected anywhere!
+ */
+ mturate = 0;
+ BUG();
+ } else
+ /*
+ * In this mode the ulp38m4 clock is divided
+ * by a factor 16, on the DB8500 typically
+ * 38400000 / 16 ~ 2.4 MHz.
+ * TODO: Replace the constant with a reference
+ * to the ULP source once this is modeled.
+ */
+ mturate = 38400000 / 16;
+ }
+ }
+
+ /* Return the clock selected for this MTU */
+ if (tcr & (1 << mtu))
+ retclk = clk32k;
+ else
+ retclk = mturate;
+
+ pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk);
+ return retclk;
+}
+