Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

[pandora-kernel.git] / arch / arm / mach-s3c2440 / mach-mini2440.c

diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index f62bb4c..dfedc9c 100644 (file)
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -97,26 +97,8 @@ static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
 
 /* USB device UDC support */
 
-static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd)
-{
-       pr_debug("udc: pullup(%d)\n", cmd);
-
-       switch (cmd) {
-               case S3C2410_UDC_P_ENABLE :
-                       gpio_set_value(S3C2410_GPC(5), 1);
-                       break;
-               case S3C2410_UDC_P_DISABLE :
-                       gpio_set_value(S3C2410_GPC(5), 0);
-                       break;
-               case S3C2410_UDC_P_RESET :
-                       break;
-               default:
-                       break;
-       }
-}
-
 static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
-       .udc_command            = mini2440_udc_pullup,
+       .pullup_pin = S3C2410_GPC(5),
 };
 
 
@@ -506,6 +488,11 @@ static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
        },
 };
 
+static struct platform_device uda1340_codec = {
+               .name = "uda134x-codec",
+               .id = -1,
+};
+
 static struct platform_device *mini2440_devices[] __initdata = {
        &s3c_device_ohci,
        &s3c_device_wdt,
@@ -521,7 +508,9 @@ static struct platform_device *mini2440_devices[] __initdata = {
        &s3c_device_nand,
        &s3c_device_sdi,
        &s3c_device_iis,
+       &uda1340_codec,
        &mini2440_audio,
+       &samsung_asoc_dma,
 };
 
 static void __init mini2440_map_io(void)
@@ -644,10 +633,6 @@ static void __init mini2440_init(void)
        s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
        s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
 
-       /* Make sure the D+ pullup pin is output */
-       WARN_ON(gpio_request(S3C2410_GPC(5), "udc pup"));
-       gpio_direction_output(S3C2410_GPC(5), 0);
-
        /* mark the key as input, without pullups (there is one on the board) */
        for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
                s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);