#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/regulator/machine.h>
-#include <linux/fsl_devices.h>
-#include <linux/input/matrix_keypad.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/common.h>
#include <mach/iomux-mx3.h>
#include <mach/3ds_debugboard.h>
+#include <mach/ulpi.h>
#include "devices-imx31.h"
#include "devices.h"
MX31_PIN_KEY_COL1_KEY_COL1,
MX31_PIN_KEY_COL2_KEY_COL2,
MX31_PIN_KEY_COL3_KEY_COL3,
+ /* USB Host 2 */
+ IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT1),
+ IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT1),
+ IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT1),
+ IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT1),
+ IOMUX_MODE(MX31_PIN_IOIS16, IOMUX_CONFIG_ALT1),
+ IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1),
+ /* USB Host2 reset */
+ IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO),
};
/*
KEY(2, 3, KEY_F10),
};
-static struct matrix_keymap_data mx31_3ds_keymap_data = {
+static const struct matrix_keymap_data mx31_3ds_keymap_data __initconst = {
.keymap = mx31_3ds_keymap,
.keymap_size = ARRAY_SIZE(mx31_3ds_keymap),
};
},
};
+static struct regulator_init_data gpo_init = {
+ .constraints = {
+ .boot_on = 1,
+ .always_on = 1,
+ }
+};
+
static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
{
- .id = MC13783_REGU_PWGT1SPI, /* Power Gate for ARM core. */
+ .id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */
.init_data = &pwgtx_init,
}, {
- .id = MC13783_REGU_PWGT2SPI, /* Power Gate for L2 Cache. */
+ .id = MC13783_REG_PWGT2SPI, /* Power Gate for L2 Cache. */
.init_data = &pwgtx_init,
+ }, {
+
+ .id = MC13783_REG_GPO1, /* Turn on 1.8V */
+ .init_data = &gpo_init,
+ }, {
+ .id = MC13783_REG_GPO3, /* Turn on 3.3V */
+ .init_data = &gpo_init,
},
};
static struct mc13783_platform_data mc13783_pdata __initdata = {
.regulators = mx31_3ds_regulators,
.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
- .flags = MC13783_USE_REGULATOR,
+ .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN,
};
/* SPI */
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
+#define USBH2_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_BYP)
static int mx31_3ds_usbotg_init(void)
{
return err;
}
-static struct fsl_usb2_platform_data usbotg_pdata = {
+static int mx31_3ds_host2_init(struct platform_device *pdev)
+{
+ int err;
+
+ mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_PC_VS2, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_PC_BVD1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_PC_BVD2, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_PC_RST, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_IOIS16, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_PC_RW_B, USB_PAD_CFG);
+
+ err = gpio_request(USBH2_RST_B, "usbh2-reset");
+ if (err) {
+ pr_err("Failed to request the USB Host 2 reset gpio\n");
+ return err;
+ }
+
+ err = gpio_direction_output(USBH2_RST_B, 0);
+ if (err) {
+ pr_err("Failed to drive the USB Host 2 reset gpio\n");
+ goto usbotg_free_reset;
+ }
+
+ mdelay(1);
+ gpio_set_value(USBH2_RST_B, 1);
+ return 0;
+
+usbotg_free_reset:
+ gpio_free(USBH2_RST_B);
+ return err;
+}
+
+#if defined(CONFIG_USB_ULPI)
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
+ .portsc = MXC_EHCI_MODE_ULPI,
+ .flags = MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+ .init = mx31_3ds_host2_init,
+ .portsc = MXC_EHCI_MODE_ULPI,
+ .flags = MXC_EHCI_POWER_PINS_ENABLED,
+};
+#endif
+
+static const struct fsl_usb2_platform_data usbotg_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
+static int otg_mode_host;
+
+static int __init mx31_3ds_otg_mode(char *options)
+{
+ if (!strcmp(options, "host"))
+ otg_mode_host = 1;
+ else if (!strcmp(options, "device"))
+ otg_mode_host = 0;
+ else
+ pr_info("otg_mode neither \"host\" nor \"device\". "
+ "Defaulting to device\n");
+ return 0;
+}
+__setup("otg_mode=", mx31_3ds_otg_mode);
+
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
spi_register_board_info(mx31_3ds_spi_devs,
ARRAY_SIZE(mx31_3ds_spi_devs));
- mxc_register_device(&imx_kpp_device, &mx31_3ds_keymap_data);
+ imx31_add_imx_keypad(&mx31_3ds_keymap_data);
mx31_3ds_usbotg_init();
- mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata);
+#if defined(CONFIG_USB_ULPI)
+ if (otg_mode_host) {
+ otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+
+ imx31_add_mxc_ehci_otg(&otg_pdata);
+ }
+ usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+ imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+#endif
+ if (!otg_mode_host)
+ imx31_add_fsl_usb2_udc(&usbotg_pdata);
if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT))
printk(KERN_WARNING "Init of the debug board failed, all "
"devices on the debug board are unusable.\n");
+ imx31_add_imx2_wdt(NULL);
}
static void __init mx31_3ds_timer_init(void)
git.openpandora.org / pandora-kernel.git / blobdiff