sound/pci/asihpi/hpi6000.c

   1 /******************************************************************************
   2
   3     AudioScience HPI driver
   4     Copyright (C) 1997-2010  AudioScience Inc. <support@audioscience.com>
   5
   6     This program is free software; you can redistribute it and/or modify
   7     it under the terms of version 2 of the GNU General Public License as
   8     published by the Free Software Foundation;
   9
  10     This program is distributed in the hope that it will be useful,
  11     but WITHOUT ANY WARRANTY; without even the implied warranty of
  12     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13     GNU General Public License for more details.
  14
  15     You should have received a copy of the GNU General Public License
  16     along with this program; if not, write to the Free Software
  17     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  18
  19  Hardware Programming Interface (HPI) for AudioScience ASI6200 series adapters.
  20  These PCI bus adapters are based on the TI C6711 DSP.
  21
  22  Exported functions:
  23  void HPI_6000(struct hpi_message *phm, struct hpi_response *phr)
  24
  25  #defines
  26  HIDE_PCI_ASSERTS to show the PCI asserts
  27  PROFILE_DSP2 get profile data from DSP2 if present (instead of DSP 1)
  28
  29 (C) Copyright AudioScience Inc. 1998-2003
  30 *******************************************************************************/
  31 #define SOURCEFILE_NAME "hpi6000.c"
  32
  33 #include "hpi_internal.h"
  34 #include "hpimsginit.h"
  35 #include "hpidebug.h"
  36 #include "hpi6000.h"
  37 #include "hpidspcd.h"
  38 #include "hpicmn.h"
  39
  40 #define HPI_HIF_BASE (0x00000200)       /* start of C67xx internal RAM */
  41 #define HPI_HIF_ADDR(member) \
  42         (HPI_HIF_BASE + offsetof(struct hpi_hif_6000, member))
  43 #define HPI_HIF_ERROR_MASK      0x4000
  44
  45 /* HPI6000 specific error codes */
  46
  47 #define HPI6000_ERROR_BASE                              900
  48 #define HPI6000_ERROR_MSG_RESP_IDLE_TIMEOUT             901
  49 #define HPI6000_ERROR_MSG_RESP_SEND_MSG_ACK             902
  50 #define HPI6000_ERROR_MSG_RESP_GET_RESP_ACK             903
  51 #define HPI6000_ERROR_MSG_GET_ADR                       904
  52 #define HPI6000_ERROR_RESP_GET_ADR                      905
  53 #define HPI6000_ERROR_MSG_RESP_BLOCKWRITE32             906
  54 #define HPI6000_ERROR_MSG_RESP_BLOCKREAD32              907
  55 #define HPI6000_ERROR_MSG_INVALID_DSP_INDEX             908
  56 #define HPI6000_ERROR_CONTROL_CACHE_PARAMS              909
  57
  58 #define HPI6000_ERROR_SEND_DATA_IDLE_TIMEOUT            911
  59 #define HPI6000_ERROR_SEND_DATA_ACK                     912
  60 #define HPI6000_ERROR_SEND_DATA_ADR                     913
  61 #define HPI6000_ERROR_SEND_DATA_TIMEOUT                 914
  62 #define HPI6000_ERROR_SEND_DATA_CMD                     915
  63 #define HPI6000_ERROR_SEND_DATA_WRITE                   916
  64 #define HPI6000_ERROR_SEND_DATA_IDLECMD                 917
  65 #define HPI6000_ERROR_SEND_DATA_VERIFY                  918
  66
  67 #define HPI6000_ERROR_GET_DATA_IDLE_TIMEOUT             921
  68 #define HPI6000_ERROR_GET_DATA_ACK                      922
  69 #define HPI6000_ERROR_GET_DATA_CMD                      923
  70 #define HPI6000_ERROR_GET_DATA_READ                     924
  71 #define HPI6000_ERROR_GET_DATA_IDLECMD                  925
  72
  73 #define HPI6000_ERROR_CONTROL_CACHE_ADDRLEN             951
  74 #define HPI6000_ERROR_CONTROL_CACHE_READ                952
  75 #define HPI6000_ERROR_CONTROL_CACHE_FLUSH               953
  76
  77 #define HPI6000_ERROR_MSG_RESP_GETRESPCMD               961
  78 #define HPI6000_ERROR_MSG_RESP_IDLECMD                  962
  79 #define HPI6000_ERROR_MSG_RESP_BLOCKVERIFY32            963
  80
  81 /* adapter init errors */
  82 #define HPI6000_ERROR_UNHANDLED_SUBSYS_ID               930
  83
  84 /* can't access PCI2040 */
  85 #define HPI6000_ERROR_INIT_PCI2040                      931
  86 /* can't access DSP HPI i/f */
  87 #define HPI6000_ERROR_INIT_DSPHPI                       932
  88 /* can't access internal DSP memory */
  89 #define HPI6000_ERROR_INIT_DSPINTMEM                    933
  90 /* can't access SDRAM - test#1 */
  91 #define HPI6000_ERROR_INIT_SDRAM1                       934
  92 /* can't access SDRAM - test#2 */
  93 #define HPI6000_ERROR_INIT_SDRAM2                       935
  94
  95 #define HPI6000_ERROR_INIT_VERIFY                       938
  96
  97 #define HPI6000_ERROR_INIT_NOACK                        939
  98
  99 #define HPI6000_ERROR_INIT_PLDTEST1                     941
 100 #define HPI6000_ERROR_INIT_PLDTEST2                     942
 101
 102 /* local defines */
 103
 104 #define HIDE_PCI_ASSERTS
 105 #define PROFILE_DSP2
 106
 107 /* for PCI2040 i/f chip */
 108 /* HPI CSR registers */
 109 /* word offsets from CSR base */
 110 /* use when io addresses defined as u32 * */
 111
 112 #define INTERRUPT_EVENT_SET     0
 113 #define INTERRUPT_EVENT_CLEAR   1
 114 #define INTERRUPT_MASK_SET      2
 115 #define INTERRUPT_MASK_CLEAR    3
 116 #define HPI_ERROR_REPORT        4
 117 #define HPI_RESET               5
 118 #define HPI_DATA_WIDTH          6
 119
 120 #define MAX_DSPS 2
 121 /* HPI registers, spaced 8K bytes = 2K words apart */
 122 #define DSP_SPACING             0x800
 123
 124 #define CONTROL                 0x0000
 125 #define ADDRESS                 0x0200
 126 #define DATA_AUTOINC            0x0400
 127 #define DATA                    0x0600
 128
 129 #define TIMEOUT 500000
 130
 131 struct dsp_obj {
 132         __iomem u32 *prHPI_control;
 133         __iomem u32 *prHPI_address;
 134         __iomem u32 *prHPI_data;
 135         __iomem u32 *prHPI_data_auto_inc;
 136         char c_dsp_rev;         /*A, B */
 137         u32 control_cache_address_on_dsp;
 138         u32 control_cache_length_on_dsp;
 139         struct hpi_adapter_obj *pa_parent_adapter;
 140 };
 141
 142 struct hpi_hw_obj {
 143         __iomem u32 *dw2040_HPICSR;
 144         __iomem u32 *dw2040_HPIDSP;
 145
 146         u16 num_dsp;
 147         struct dsp_obj ado[MAX_DSPS];
 148
 149         u32 message_buffer_address_on_dsp;
 150         u32 response_buffer_address_on_dsp;
 151         u32 pCI2040HPI_error_count;
 152
 153         struct hpi_control_cache_single control_cache[HPI_NMIXER_CONTROLS];
 154         struct hpi_control_cache *p_cache;
 155 };
 156
 157 static u16 hpi6000_dsp_block_write32(struct hpi_adapter_obj *pao,
 158         u16 dsp_index, u32 hpi_address, u32 *source, u32 count);
 159 static u16 hpi6000_dsp_block_read32(struct hpi_adapter_obj *pao,
 160         u16 dsp_index, u32 hpi_address, u32 *dest, u32 count);
 161
 162 static short hpi6000_adapter_boot_load_dsp(struct hpi_adapter_obj *pao,
 163         u32 *pos_error_code);
 164 static short hpi6000_check_PCI2040_error_flag(struct hpi_adapter_obj *pao,
 165         u16 read_or_write);
 166 #define H6READ 1
 167 #define H6WRITE 0
 168
 169 static short hpi6000_update_control_cache(struct hpi_adapter_obj *pao,
 170         struct hpi_message *phm);
 171 static short hpi6000_message_response_sequence(struct hpi_adapter_obj *pao,
 172         u16 dsp_index, struct hpi_message *phm, struct hpi_response *phr);
 173
 174 static void hw_message(struct hpi_adapter_obj *pao, struct hpi_message *phm,
 175         struct hpi_response *phr);
 176
 177 static short hpi6000_wait_dsp_ack(struct hpi_adapter_obj *pao, u16 dsp_index,
 178         u32 ack_value);
 179
 180 static short hpi6000_send_host_command(struct hpi_adapter_obj *pao,
 181         u16 dsp_index, u32 host_cmd);
 182
 183 static void hpi6000_send_dsp_interrupt(struct dsp_obj *pdo);
 184
 185 static short hpi6000_send_data(struct hpi_adapter_obj *pao, u16 dsp_index,
 186         struct hpi_message *phm, struct hpi_response *phr);
 187
 188 static short hpi6000_get_data(struct hpi_adapter_obj *pao, u16 dsp_index,
 189         struct hpi_message *phm, struct hpi_response *phr);
 190
 191 static void hpi_write_word(struct dsp_obj *pdo, u32 address, u32 data);
 192
 193 static u32 hpi_read_word(struct dsp_obj *pdo, u32 address);
 194
 195 static void hpi_write_block(struct dsp_obj *pdo, u32 address, u32 *pdata,
 196         u32 length);
 197
 198 static void hpi_read_block(struct dsp_obj *pdo, u32 address, u32 *pdata,
 199         u32 length);
 200
 201 static void subsys_create_adapter(struct hpi_message *phm,
 202         struct hpi_response *phr);
 203
 204 static void subsys_delete_adapter(struct hpi_message *phm,
 205         struct hpi_response *phr);
 206
 207 static void adapter_get_asserts(struct hpi_adapter_obj *pao,
 208         struct hpi_message *phm, struct hpi_response *phr);
 209
 210 static short create_adapter_obj(struct hpi_adapter_obj *pao,
 211         u32 *pos_error_code);
 212
 213 /* local globals */
 214
 215 static u16 gw_pci_read_asserts; /* used to count PCI2040 errors */
 216 static u16 gw_pci_write_asserts;        /* used to count PCI2040 errors */
 217
 218 static void subsys_message(struct hpi_message *phm, struct hpi_response *phr)
 219 {
 220
 221         switch (phm->function) {
 222         case HPI_SUBSYS_OPEN:
 223         case HPI_SUBSYS_CLOSE:
 224         case HPI_SUBSYS_GET_INFO:
 225         case HPI_SUBSYS_DRIVER_UNLOAD:
 226         case HPI_SUBSYS_DRIVER_LOAD:
 227         case HPI_SUBSYS_FIND_ADAPTERS:
 228                 /* messages that should not get here */
 229                 phr->error = HPI_ERROR_UNIMPLEMENTED;
 230                 break;
 231         case HPI_SUBSYS_CREATE_ADAPTER:
 232                 subsys_create_adapter(phm, phr);
 233                 break;
 234         case HPI_SUBSYS_DELETE_ADAPTER:
 235                 subsys_delete_adapter(phm, phr);
 236                 break;
 237         default:
 238                 phr->error = HPI_ERROR_INVALID_FUNC;
 239                 break;
 240         }
 241 }
 242
 243 static void control_message(struct hpi_adapter_obj *pao,
 244         struct hpi_message *phm, struct hpi_response *phr)
 245 {
 246
 247         switch (phm->function) {
 248         case HPI_CONTROL_GET_STATE:
 249                 if (pao->has_control_cache) {
 250                         u16 err;
 251                         err = hpi6000_update_control_cache(pao, phm);
 252
 253                         if (err) {
 254                                 phr->error = err;
 255                                 break;
 256                         }
 257
 258                         if (hpi_check_control_cache(((struct hpi_hw_obj *)
 259                                                 pao->priv)->p_cache, phm,
 260                                         phr))
 261                                 break;
 262                 }
 263                 hw_message(pao, phm, phr);
 264                 break;
 265         case HPI_CONTROL_GET_INFO:
 266                 hw_message(pao, phm, phr);
 267                 break;
 268         case HPI_CONTROL_SET_STATE:
 269                 hw_message(pao, phm, phr);
 270                 hpi_sync_control_cache(((struct hpi_hw_obj *)pao->priv)->
 271                         p_cache, phm, phr);
 272                 break;
 273         default:
 274                 phr->error = HPI_ERROR_INVALID_FUNC;
 275                 break;
 276         }
 277 }
 278
 279 static void adapter_message(struct hpi_adapter_obj *pao,
 280         struct hpi_message *phm, struct hpi_response *phr)
 281 {
 282         switch (phm->function) {
 283         case HPI_ADAPTER_GET_INFO:
 284                 hw_message(pao, phm, phr);
 285                 break;
 286         case HPI_ADAPTER_GET_ASSERT:
 287                 adapter_get_asserts(pao, phm, phr);
 288                 break;
 289         case HPI_ADAPTER_OPEN:
 290         case HPI_ADAPTER_CLOSE:
 291         case HPI_ADAPTER_TEST_ASSERT:
 292         case HPI_ADAPTER_SELFTEST:
 293         case HPI_ADAPTER_GET_MODE:
 294         case HPI_ADAPTER_SET_MODE:
 295         case HPI_ADAPTER_FIND_OBJECT:
 296         case HPI_ADAPTER_GET_PROPERTY:
 297         case HPI_ADAPTER_SET_PROPERTY:
 298         case HPI_ADAPTER_ENUM_PROPERTY:
 299                 hw_message(pao, phm, phr);
 300                 break;
 301         default:
 302                 phr->error = HPI_ERROR_INVALID_FUNC;
 303                 break;
 304         }
 305 }
 306
 307 static void outstream_message(struct hpi_adapter_obj *pao,
 308         struct hpi_message *phm, struct hpi_response *phr)
 309 {
 310         switch (phm->function) {
 311         case HPI_OSTREAM_HOSTBUFFER_ALLOC:
 312         case HPI_OSTREAM_HOSTBUFFER_FREE:
 313                 /* Don't let these messages go to the HW function because
 314                  * they're called without allocating the spinlock.
 315                  * For the HPI6000 adapters the HW would return
 316                  * HPI_ERROR_INVALID_FUNC anyway.
 317                  */
 318                 phr->error = HPI_ERROR_INVALID_FUNC;
 319                 break;
 320         default:
 321                 hw_message(pao, phm, phr);
 322                 return;
 323         }
 324 }
 325
 326 static void instream_message(struct hpi_adapter_obj *pao,
 327         struct hpi_message *phm, struct hpi_response *phr)
 328 {
 329
 330         switch (phm->function) {
 331         case HPI_ISTREAM_HOSTBUFFER_ALLOC:
 332         case HPI_ISTREAM_HOSTBUFFER_FREE:
 333                 /* Don't let these messages go to the HW function because
 334                  * they're called without allocating the spinlock.
 335                  * For the HPI6000 adapters the HW would return
 336                  * HPI_ERROR_INVALID_FUNC anyway.
 337                  */
 338                 phr->error = HPI_ERROR_INVALID_FUNC;
 339                 break;
 340         default:
 341                 hw_message(pao, phm, phr);
 342                 return;
 343         }
 344 }
 345
 346 /************************************************************************/
 347 /** HPI_6000()
 348  * Entry point from HPIMAN
 349  * All calls to the HPI start here
 350  */
 351 void HPI_6000(struct hpi_message *phm, struct hpi_response *phr)
 352 {
 353         struct hpi_adapter_obj *pao = NULL;
 354
 355         /* subsytem messages get executed by every HPI. */
 356         /* All other messages are ignored unless the adapter index matches */
 357         /* an adapter in the HPI */
 358         HPI_DEBUG_LOG(DEBUG, "O %d,F %x\n", phm->object, phm->function);
 359
 360         /* if Dsp has crashed then do not communicate with it any more */
 361         if (phm->object != HPI_OBJ_SUBSYSTEM) {
 362                 pao = hpi_find_adapter(phm->adapter_index);
 363                 if (!pao) {
 364                         HPI_DEBUG_LOG(DEBUG,
 365                                 " %d,%d refused, for another HPI?\n",
 366                                 phm->object, phm->function);
 367                         return;
 368                 }
 369
 370                 if (pao->dsp_crashed >= 10) {
 371                         hpi_init_response(phr, phm->object, phm->function,
 372                                 HPI_ERROR_DSP_HARDWARE);
 373                         HPI_DEBUG_LOG(DEBUG, " %d,%d dsp crashed.\n",
 374                                 phm->object, phm->function);
 375                         return;
 376                 }
 377         }
 378         /* Init default response including the size field */
 379         if (phm->function != HPI_SUBSYS_CREATE_ADAPTER)
 380                 hpi_init_response(phr, phm->object, phm->function,
 381                         HPI_ERROR_PROCESSING_MESSAGE);
 382
 383         switch (phm->type) {
 384         case HPI_TYPE_MESSAGE:
 385                 switch (phm->object) {
 386                 case HPI_OBJ_SUBSYSTEM:
 387                         subsys_message(phm, phr);
 388                         break;
 389
 390                 case HPI_OBJ_ADAPTER:
 391                         phr->size =
 392                                 sizeof(struct hpi_response_header) +
 393                                 sizeof(struct hpi_adapter_res);
 394                         adapter_message(pao, phm, phr);
 395                         break;
 396
 397                 case HPI_OBJ_CONTROL:
 398                         control_message(pao, phm, phr);
 399                         break;
 400
 401                 case HPI_OBJ_OSTREAM:
 402                         outstream_message(pao, phm, phr);
 403                         break;
 404
 405                 case HPI_OBJ_ISTREAM:
 406                         instream_message(pao, phm, phr);
 407                         break;
 408
 409                 default:
 410                         hw_message(pao, phm, phr);
 411                         break;
 412                 }
 413                 break;
 414
 415         default:
 416                 phr->error = HPI_ERROR_INVALID_TYPE;
 417                 break;
 418         }
 419 }
 420
 421 /************************************************************************/
 422 /* SUBSYSTEM */
 423
 424 /* create an adapter object and initialise it based on resource information
 425  * passed in in the message
 426  * NOTE - you cannot use this function AND the FindAdapters function at the
 427  * same time, the application must use only one of them to get the adapters
 428  */
 429 static void subsys_create_adapter(struct hpi_message *phm,
 430         struct hpi_response *phr)
 431 {
 432         /* create temp adapter obj, because we don't know what index yet */
 433         struct hpi_adapter_obj ao;
 434         struct hpi_adapter_obj *pao;
 435         u32 os_error_code;
 436         short error = 0;
 437         u32 dsp_index = 0;
 438
 439         HPI_DEBUG_LOG(VERBOSE, "subsys_create_adapter\n");
 440
 441         memset(&ao, 0, sizeof(ao));
 442
 443         /* this HPI only creates adapters for TI/PCI2040 based devices */
 444         if (phm->u.s.resource.bus_type != HPI_BUS_PCI)
 445                 return;
 446         if (phm->u.s.resource.r.pci->vendor_id != HPI_PCI_VENDOR_ID_TI)
 447                 return;
 448         if (phm->u.s.resource.r.pci->device_id != HPI_PCI_DEV_ID_PCI2040)
 449                 return;
 450
 451         ao.priv = kzalloc(sizeof(struct hpi_hw_obj), GFP_KERNEL);
 452         if (!ao.priv) {
 453                 HPI_DEBUG_LOG(ERROR, "cant get mem for adapter object\n");
 454                 phr->error = HPI_ERROR_MEMORY_ALLOC;
 455                 return;
 456         }
 457
 458         /* create the adapter object based on the resource information */
 459         /*? memcpy(&ao.Pci,&phm->u.s.Resource.r.Pci,sizeof(ao.Pci)); */
 460         ao.pci = *phm->u.s.resource.r.pci;
 461
 462         error = create_adapter_obj(&ao, &os_error_code);
 463         if (!error)
 464                 error = hpi_add_adapter(&ao);
 465         if (error) {
 466                 phr->u.s.data = os_error_code;
 467                 kfree(ao.priv);
 468                 phr->error = error;
 469                 return;
 470         }
 471         /* need to update paParentAdapter */
 472         pao = hpi_find_adapter(ao.index);
 473         if (!pao) {
 474                 /* We just added this adapter, why can't we find it!? */
 475                 HPI_DEBUG_LOG(ERROR, "lost adapter after boot\n");
 476                 phr->error = 950;
 477                 return;
 478         }
 479
 480         for (dsp_index = 0; dsp_index < MAX_DSPS; dsp_index++) {
 481                 struct hpi_hw_obj *phw = (struct hpi_hw_obj *)pao->priv;
 482                 phw->ado[dsp_index].pa_parent_adapter = pao;
 483         }
 484
 485         phr->u.s.aw_adapter_list[ao.index] = ao.adapter_type;
 486         phr->u.s.adapter_index = ao.index;
 487         phr->u.s.num_adapters++;
 488         phr->error = 0;
 489 }
 490
 491 static void subsys_delete_adapter(struct hpi_message *phm,
 492         struct hpi_response *phr)
 493 {
 494         struct hpi_adapter_obj *pao = NULL;
 495         struct hpi_hw_obj *phw;
 496
 497         pao = hpi_find_adapter(phm->adapter_index);
 498         if (!pao)
 499                 return;
 500
 501         phw = (struct hpi_hw_obj *)pao->priv;
 502
 503         if (pao->has_control_cache)
 504                 hpi_free_control_cache(phw->p_cache);
 505
 506         hpi_delete_adapter(pao);
 507         kfree(phw);
 508
 509         phr->error = 0;
 510 }
 511
 512 /* this routine is called from SubSysFindAdapter and SubSysCreateAdapter */
 513 static short create_adapter_obj(struct hpi_adapter_obj *pao,
 514         u32 *pos_error_code)
 515 {
 516         short boot_error = 0;
 517         u32 dsp_index = 0;
 518         u32 control_cache_size = 0;
 519         u32 control_cache_count = 0;
 520         struct hpi_hw_obj *phw = (struct hpi_hw_obj *)pao->priv;
 521
 522         /* init error reporting */
 523         pao->dsp_crashed = 0;
 524
 525         /* The PCI2040 has the following address map */
 526         /* BAR0 - 4K = HPI control and status registers on PCI2040 (HPI CSR) */
 527         /* BAR1 - 32K = HPI registers on DSP */
 528         phw->dw2040_HPICSR = pao->pci.ap_mem_base[0];
 529         phw->dw2040_HPIDSP = pao->pci.ap_mem_base[1];
 530         HPI_DEBUG_LOG(VERBOSE, "csr %p, dsp %p\n", phw->dw2040_HPICSR,
 531                 phw->dw2040_HPIDSP);
 532
 533         /* set addresses for the possible DSP HPI interfaces */
 534         for (dsp_index = 0; dsp_index < MAX_DSPS; dsp_index++) {
 535                 phw->ado[dsp_index].prHPI_control =
 536                         phw->dw2040_HPIDSP + (CONTROL +
 537                         DSP_SPACING * dsp_index);
 538
 539                 phw->ado[dsp_index].prHPI_address =
 540                         phw->dw2040_HPIDSP + (ADDRESS +
 541                         DSP_SPACING * dsp_index);
 542                 phw->ado[dsp_index].prHPI_data =
 543                         phw->dw2040_HPIDSP + (DATA + DSP_SPACING * dsp_index);
 544
 545                 phw->ado[dsp_index].prHPI_data_auto_inc =
 546                         phw->dw2040_HPIDSP + (DATA_AUTOINC +
 547                         DSP_SPACING * dsp_index);
 548
 549                 HPI_DEBUG_LOG(VERBOSE, "ctl %p, adr %p, dat %p, dat++ %p\n",
 550                         phw->ado[dsp_index].prHPI_control,
 551                         phw->ado[dsp_index].prHPI_address,
 552                         phw->ado[dsp_index].prHPI_data,
 553                         phw->ado[dsp_index].prHPI_data_auto_inc);
 554
 555                 phw->ado[dsp_index].pa_parent_adapter = pao;
 556         }
 557
 558         phw->pCI2040HPI_error_count = 0;
 559         pao->has_control_cache = 0;
 560
 561         /* Set the default number of DSPs on this card */
 562         /* This is (conditionally) adjusted after bootloading */
 563         /* of the first DSP in the bootload section. */
 564         phw->num_dsp = 1;
 565
 566         boot_error = hpi6000_adapter_boot_load_dsp(pao, pos_error_code);
 567         if (boot_error)
 568                 return boot_error;
 569
 570         HPI_DEBUG_LOG(INFO, "bootload DSP OK\n");
 571
 572         phw->message_buffer_address_on_dsp = 0L;
 573         phw->response_buffer_address_on_dsp = 0L;
 574
 575         /* get info about the adapter by asking the adapter */
 576         /* send a HPI_ADAPTER_GET_INFO message */
 577         {
 578                 struct hpi_message hM;
 579                 struct hpi_response hR0;        /* response from DSP 0 */
 580                 struct hpi_response hR1;        /* response from DSP 1 */
 581                 u16 error = 0;
 582
 583                 HPI_DEBUG_LOG(VERBOSE, "send ADAPTER_GET_INFO\n");
 584                 memset(&hM, 0, sizeof(hM));
 585                 hM.type = HPI_TYPE_MESSAGE;
 586                 hM.size = sizeof(struct hpi_message);
 587                 hM.object = HPI_OBJ_ADAPTER;
 588                 hM.function = HPI_ADAPTER_GET_INFO;
 589                 hM.adapter_index = 0;
 590                 memset(&hR0, 0, sizeof(hR0));
 591                 memset(&hR1, 0, sizeof(hR1));
 592                 hR0.size = sizeof(hR0);
 593                 hR1.size = sizeof(hR1);
 594
 595                 error = hpi6000_message_response_sequence(pao, 0, &hM, &hR0);
 596                 if (hR0.error) {
 597                         HPI_DEBUG_LOG(DEBUG, "message error %d\n", hR0.error);
 598                         return hR0.error;
 599                 }
 600                 if (phw->num_dsp == 2) {
 601                         error = hpi6000_message_response_sequence(pao, 1, &hM,
 602                                 &hR1);
 603                         if (error)
 604                                 return error;
 605                 }
 606                 pao->adapter_type = hR0.u.a.adapter_type;
 607                 pao->index = hR0.u.a.adapter_index;
 608         }
 609
 610         memset(&phw->control_cache[0], 0,
 611                 sizeof(struct hpi_control_cache_single) *
 612                 HPI_NMIXER_CONTROLS);
 613         /* Read the control cache length to figure out if it is turned on */
 614         control_cache_size =
 615                 hpi_read_word(&phw->ado[0],
 616                 HPI_HIF_ADDR(control_cache_size_in_bytes));
 617         if (control_cache_size) {
 618                 control_cache_count =
 619                         hpi_read_word(&phw->ado[0],
 620                         HPI_HIF_ADDR(control_cache_count));
 621                 pao->has_control_cache = 1;
 622
 623                 phw->p_cache =
 624                         hpi_alloc_control_cache(control_cache_count,
 625                         control_cache_size, (struct hpi_control_cache_info *)
 626                         &phw->control_cache[0]
 627                         );
 628                 if (!phw->p_cache)
 629                         pao->has_control_cache = 0;
 630         } else
 631                 pao->has_control_cache = 0;
 632
 633         HPI_DEBUG_LOG(DEBUG, "get adapter info ASI%04X index %d\n",
 634                 pao->adapter_type, pao->index);
 635         pao->open = 0;  /* upon creation the adapter is closed */
 636         return 0;
 637 }
 638
 639 /************************************************************************/
 640 /* ADAPTER */
 641
 642 static void adapter_get_asserts(struct hpi_adapter_obj *pao,
 643         struct hpi_message *phm, struct hpi_response *phr)
 644 {
 645 #ifndef HIDE_PCI_ASSERTS
 646         /* if we have PCI2040 asserts then collect them */
 647         if ((gw_pci_read_asserts > 0) || (gw_pci_write_asserts > 0)) {
 648                 phr->u.a.serial_number =
 649                         gw_pci_read_asserts * 100 + gw_pci_write_asserts;
 650                 phr->u.a.adapter_index = 1;     /* assert count */
 651                 phr->u.a.adapter_type = -1;     /* "dsp index" */
 652                 strcpy(phr->u.a.sz_adapter_assert, "PCI2040 error");
 653                 gw_pci_read_asserts = 0;
 654                 gw_pci_write_asserts = 0;
 655                 phr->error = 0;
 656         } else
 657 #endif
 658                 hw_message(pao, phm, phr);      /*get DSP asserts */
 659
 660         return;
 661 }
 662
 663 /************************************************************************/
 664 /* LOW-LEVEL */
 665
 666 static short hpi6000_adapter_boot_load_dsp(struct hpi_adapter_obj *pao,
 667         u32 *pos_error_code)
 668 {
 669         struct hpi_hw_obj *phw = (struct hpi_hw_obj *)pao->priv;
 670         short error;
 671         u32 timeout;
 672         u32 read = 0;
 673         u32 i = 0;
 674         u32 data = 0;
 675         u32 j = 0;
 676         u32 test_addr = 0x80000000;
 677         u32 test_data = 0x00000001;
 678         u32 dw2040_reset = 0;
 679         u32 dsp_index = 0;
 680         u32 endian = 0;
 681         u32 adapter_info = 0;
 682         u32 delay = 0;
 683
 684         struct dsp_code dsp_code;
 685         u16 boot_load_family = 0;
 686
 687         /* NOTE don't use wAdapterType in this routine. It is not setup yet */
 688
 689         switch (pao->pci.subsys_device_id) {
 690         case 0x5100:
 691         case 0x5110:    /* ASI5100 revB or higher with C6711D */
 692         case 0x5200:    /* ASI5200 PC_ie version of ASI5100 */
 693         case 0x6100:
 694         case 0x6200:
 695                 boot_load_family = HPI_ADAPTER_FAMILY_ASI(0x6200);
 696                 break;
 697         default:
 698                 return HPI6000_ERROR_UNHANDLED_SUBSYS_ID;
 699         }
 700
 701         /* reset all DSPs, indicate two DSPs are present
 702          * set RST3-=1 to disconnect HAD8 to set DSP in little endian mode
 703          */
 704         endian = 0;
 705         dw2040_reset = 0x0003000F;
 706         iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);
 707
 708         /* read back register to make sure PCI2040 chip is functioning
 709          * note that bits 4..15 are read-only and so should always return zero,
 710          * even though we wrote 1 to them
 711          */
 712         for (i = 0; i < 1000; i++)
 713                 delay = ioread32(phw->dw2040_HPICSR + HPI_RESET);
 714         if (delay != dw2040_reset) {
 715                 HPI_DEBUG_LOG(ERROR, "INIT_PCI2040 %x %x\n", dw2040_reset,
 716                         delay);
 717                 return HPI6000_ERROR_INIT_PCI2040;
 718         }
 719
 720         /* Indicate that DSP#0,1 is a C6X */
 721         iowrite32(0x00000003, phw->dw2040_HPICSR + HPI_DATA_WIDTH);
 722         /* set Bit30 and 29 - which will prevent Target aborts from being
 723          * issued upon HPI or GP error
 724          */
 725         iowrite32(0x60000000, phw->dw2040_HPICSR + INTERRUPT_MASK_SET);
 726
 727         /* isolate DSP HAD8 line from PCI2040 so that
 728          * Little endian can be set by pullup
 729          */
 730         dw2040_reset = dw2040_reset & (~(endian << 3));
 731         iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);
 732
 733         phw->ado[0].c_dsp_rev = 'B';    /* revB */
 734         phw->ado[1].c_dsp_rev = 'B';    /* revB */
 735
 736         /*Take both DSPs out of reset, setting HAD8 to the correct Endian */
 737         dw2040_reset = dw2040_reset & (~0x00000001);    /* start DSP 0 */
 738         iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);
 739         dw2040_reset = dw2040_reset & (~0x00000002);    /* start DSP 1 */
 740         iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);
 741
 742         /* set HAD8 back to PCI2040, now that DSP set to little endian mode */
 743         dw2040_reset = dw2040_reset & (~0x00000008);
 744         iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET);
 745         /*delay to allow DSP to get going */
 746         for (i = 0; i < 100; i++)
 747                 delay = ioread32(phw->dw2040_HPICSR + HPI_RESET);
 748
 749         /* loop through all DSPs, downloading DSP code */
 750         for (dsp_index = 0; dsp_index < phw->num_dsp; dsp_index++) {
 751                 struct dsp_obj *pdo = &phw->ado[dsp_index];
 752
 753                 /* configure DSP so that we download code into the SRAM */
 754                 /* set control reg for little endian, HWOB=1 */
 755                 iowrite32(0x00010001, pdo->prHPI_control);
 756
 757                 /* test access to the HPI address register (HPIA) */
 758                 test_data = 0x00000001;
 759                 for (j = 0; j < 32; j++) {
 760                         iowrite32(test_data, pdo->prHPI_address);
 761                         data = ioread32(pdo->prHPI_address);
 762                         if (data != test_data) {
 763                                 HPI_DEBUG_LOG(ERROR, "INIT_DSPHPI %x %x %x\n",
 764                                         test_data, data, dsp_index);
 765                                 return HPI6000_ERROR_INIT_DSPHPI;
 766                         }
 767                         test_data = test_data << 1;
 768                 }
 769
 770 /* if C6713 the setup PLL to generate 225MHz from 25MHz.
 771 * Since the PLLDIV1 read is sometimes wrong, even on a C6713,
 772 * we're going to do this unconditionally
 773 */
 774 /* PLLDIV1 should have a value of 8000 after reset */
 775 /*
 776         if (HpiReadWord(pdo,0x01B7C118) == 0x8000)
 777 */
 778                 {
 779                         /* C6713 datasheet says we cannot program PLL from HPI,
 780                          * and indeed if we try to set the PLL multiply from the
 781                          * HPI, the PLL does not seem to lock,
 782                          * so we enable the PLL and use the default of x 7
 783                          */
 784                         /* bypass PLL */
 785                         hpi_write_word(pdo, 0x01B7C100, 0x0000);
 786                         for (i = 0; i < 100; i++)
 787                                 delay = ioread32(phw->dw2040_HPICSR +
 788                                         HPI_RESET);
 789
 790                         /*  ** use default of PLL  x7 ** */
 791                         /* EMIF = 225/3=75MHz */
 792                         hpi_write_word(pdo, 0x01B7C120, 0x8002);
 793                         /* peri = 225/2 */
 794                         hpi_write_word(pdo, 0x01B7C11C, 0x8001);
 795                         /* cpu  = 225/1 */
 796                         hpi_write_word(pdo, 0x01B7C118, 0x8000);
 797                         /* ~200us delay */
 798                         for (i = 0; i < 2000; i++)
 799                                 delay = ioread32(phw->dw2040_HPICSR +
 800                                         HPI_RESET);
 801                         /* PLL not bypassed */
 802                         hpi_write_word(pdo, 0x01B7C100, 0x0001);
 803                         /* ~200us delay */
 804                         for (i = 0; i < 2000; i++)
 805                                 delay = ioread32(phw->dw2040_HPICSR +
 806                                         HPI_RESET);
 807                 }
 808
 809                 /* test r/w to internal DSP memory
 810                  * C6711 has L2 cache mapped to 0x0 when reset
 811                  *
 812                  *  revB - because of bug 3.0.1 last HPI read
 813                  * (before HPI address issued) must be non-autoinc
 814                  */
 815                 /* test each bit in the 32bit word */
 816                 for (i = 0; i < 100; i++) {
 817                         test_addr = 0x00000000;
 818                         test_data = 0x00000001;
 819                         for (j = 0; j < 32; j++) {
 820                                 hpi_write_word(pdo, test_addr + i, test_data);
 821                                 data = hpi_read_word(pdo, test_addr + i);
 822                                 if (data != test_data) {
 823                                         HPI_DEBUG_LOG(ERROR,
 824                                                 "DSP mem %x %x %x %x\n",
 825                                                 test_addr + i, test_data,
 826                                                 data, dsp_index);
 827
 828                                         return HPI6000_ERROR_INIT_DSPINTMEM;
 829                                 }
 830                                 test_data = test_data << 1;
 831                         }
 832                 }
 833
 834                 /* memory map of ASI6200
 835                    00000000-0000FFFF    16Kx32 internal program
 836                    01800000-019FFFFF    Internal peripheral
 837                    80000000-807FFFFF    CE0 2Mx32 SDRAM running @ 100MHz
 838                    90000000-9000FFFF    CE1 Async peripherals:
 839
 840                    EMIF config
 841                    ------------
 842                    Global EMIF control
 843                    0 -
 844                    1 -
 845                    2 -
 846                    3 CLK2EN = 1   CLKOUT2 enabled
 847                    4 CLK1EN = 0   CLKOUT1 disabled
 848                    5 EKEN = 1 <--!! C6713 specific, enables ECLKOUT
 849                    6 -
 850                    7 NOHOLD = 1   external HOLD disabled
 851                    8 HOLDA = 0    HOLDA output is low
 852                    9 HOLD = 0             HOLD input is low
 853                    10 ARDY = 1    ARDY input is high
 854                    11 BUSREQ = 0   BUSREQ output is low
 855                    12,13 Reserved = 1
 856                  */
 857                 hpi_write_word(pdo, 0x01800000, 0x34A8);
 858
 859                 /* EMIF CE0 setup - 2Mx32 Sync DRAM
 860                    31..28       Wr setup
 861                    27..22       Wr strobe
 862                    21..20       Wr hold
 863                    19..16       Rd setup
 864                    15..14       -
 865                    13..8        Rd strobe
 866                    7..4         MTYPE   0011            Sync DRAM 32bits
 867                    3            Wr hold MSB
 868                    2..0         Rd hold
 869                  */
 870                 hpi_write_word(pdo, 0x01800008, 0x00000030);
 871
 872                 /* EMIF SDRAM Extension
 873                    31-21        0
 874                    20           WR2RD = 0
 875                    19-18        WR2DEAC = 1
 876                    17           WR2WR = 0
 877                    16-15        R2WDQM = 2
 878                    14-12        RD2WR = 4
 879                    11-10        RD2DEAC = 1
 880                    9            RD2RD = 1
 881                    8-7          THZP = 10b
 882                    6-5          TWR  = 2-1 = 01b (tWR = 10ns)
 883                    4            TRRD = 0b = 2 ECLK (tRRD = 14ns)
 884                    3-1          TRAS = 5-1 = 100b (Tras=42ns = 5 ECLK)
 885                    1            CAS latency = 3 ECLK
 886                    (for Micron 2M32-7 operating at 100Mhz)
 887                  */
 888
 889                 /* need to use this else DSP code crashes */
 890                 hpi_write_word(pdo, 0x01800020, 0x001BDF29);
 891
 892                 /* EMIF SDRAM control - set up for a 2Mx32 SDRAM (512x32x4 bank)
 893                    31           -               -
 894                    30           SDBSZ   1               4 bank
 895                    29..28       SDRSZ   00              11 row address pins
 896                    27..26       SDCSZ   01              8 column address pins
 897                    25           RFEN    1               refersh enabled
 898                    24           INIT    1               init SDRAM
 899                    23..20       TRCD    0001
 900                    19..16       TRP             0001
 901                    15..12       TRC             0110
 902                    11..0        -               -
 903                  */
 904                 /*      need to use this else DSP code crashes */
 905                 hpi_write_word(pdo, 0x01800018, 0x47117000);
 906
 907                 /* EMIF SDRAM Refresh Timing */
 908                 hpi_write_word(pdo, 0x0180001C, 0x00000410);
 909
 910                 /*MIF CE1 setup - Async peripherals
 911                    @100MHz bus speed, each cycle is 10ns,
 912                    31..28       Wr setup  = 1
 913                    27..22       Wr strobe = 3                   30ns
 914                    21..20       Wr hold = 1
 915                    19..16       Rd setup =1
 916                    15..14       Ta = 2
 917                    13..8        Rd strobe = 3                   30ns
 918                    7..4         MTYPE   0010            Async 32bits
 919                    3            Wr hold MSB =0
 920                    2..0         Rd hold = 1
 921                  */
 922                 {
 923                         u32 cE1 =
 924                                 (1L << 28) | (3L << 22) | (1L << 20) | (1L <<
 925                                 16) | (2L << 14) | (3L << 8) | (2L << 4) | 1L;
 926                         hpi_write_word(pdo, 0x01800004, cE1);
 927                 }
 928
 929                 /* delay a little to allow SDRAM and DSP to "get going" */
 930
 931                 for (i = 0; i < 1000; i++)
 932                         delay = ioread32(phw->dw2040_HPICSR + HPI_RESET);
 933
 934                 /* test access to SDRAM */
 935                 {
 936                         test_addr = 0x80000000;
 937                         test_data = 0x00000001;
 938                         /* test each bit in the 32bit word */
 939                         for (j = 0; j < 32; j++) {
 940                                 hpi_write_word(pdo, test_addr, test_data);
 941                                 data = hpi_read_word(pdo, test_addr);
 942                                 if (data != test_data) {
 943                                         HPI_DEBUG_LOG(ERROR,
 944                                                 "DSP dram %x %x %x %x\n",
 945                                                 test_addr, test_data, data,
 946                                                 dsp_index);
 947
 948                                         return HPI6000_ERROR_INIT_SDRAM1;
 949                                 }
 950                                 test_data = test_data << 1;
 951                         }
 952                         /* test every Nth address in the DRAM */
 953 #define DRAM_SIZE_WORDS 0x200000        /*2_mx32 */
 954 #define DRAM_INC 1024
 955                         test_addr = 0x80000000;
 956                         test_data = 0x0;
 957                         for (i = 0; i < DRAM_SIZE_WORDS; i = i + DRAM_INC) {
 958                                 hpi_write_word(pdo, test_addr + i, test_data);
 959                                 test_data++;
 960                         }
 961                         test_addr = 0x80000000;
 962                         test_data = 0x0;
 963                         for (i = 0; i < DRAM_SIZE_WORDS; i = i + DRAM_INC) {
 964                                 data = hpi_read_word(pdo, test_addr + i);
 965                                 if (data != test_data) {
 966                                         HPI_DEBUG_LOG(ERROR,
 967                                                 "DSP dram %x %x %x %x\n",
 968                                                 test_addr + i, test_data,
 969                                                 data, dsp_index);
 970                                         return HPI6000_ERROR_INIT_SDRAM2;
 971                                 }
 972                                 test_data++;
 973                         }
 974
 975                 }
 976
 977                 /* write the DSP code down into the DSPs memory */
 978                 /*HpiDspCode_Open(nBootLoadFamily,&DspCode,pdwOsErrorCode); */
 979                 dsp_code.ps_dev = pao->pci.p_os_data;
 980
 981                 error = hpi_dsp_code_open(boot_load_family, &dsp_code,
 982                         pos_error_code);
 983
 984                 if (error)
 985                         return error;
 986
 987                 while (1) {
 988                         u32 length;
 989                         u32 address;
 990                         u32 type;
 991                         u32 *pcode;
 992
 993                         error = hpi_dsp_code_read_word(&dsp_code, &length);
 994                         if (error)
 995                                 break;
 996                         if (length == 0xFFFFFFFF)
 997                                 break;  /* end of code */
 998
 999                         error = hpi_dsp_code_read_word(&dsp_code, &address);
1000                         if (error)
1001                                 break;
1002                         error = hpi_dsp_code_read_word(&dsp_code, &type);
1003                         if (error)
1004                                 break;
1005                         error = hpi_dsp_code_read_block(length, &dsp_code,
1006                                 &pcode);
1007                         if (error)
1008                                 break;
1009                         error = hpi6000_dsp_block_write32(pao, (u16)dsp_index,
1010                                 address, pcode, length);
1011                         if (error)
1012                                 break;
1013                 }
1014
1015                 if (error) {
1016                         hpi_dsp_code_close(&dsp_code);
1017                         return error;
1018                 }
1019                 /* verify that code was written correctly */
1020                 /* this time through, assume no errors in DSP code file/array */
1021                 hpi_dsp_code_rewind(&dsp_code);
1022                 while (1) {
1023                         u32 length;
1024                         u32 address;
1025                         u32 type;
1026                         u32 *pcode;
1027
1028                         hpi_dsp_code_read_word(&dsp_code, &length);
1029                         if (length == 0xFFFFFFFF)
1030                                 break;  /* end of code */
1031
1032                         hpi_dsp_code_read_word(&dsp_code, &address);
1033                         hpi_dsp_code_read_word(&dsp_code, &type);
1034                         hpi_dsp_code_read_block(length, &dsp_code, &pcode);
1035
1036                         for (i = 0; i < length; i++) {
1037                                 data = hpi_read_word(pdo, address);
1038                                 if (data != *pcode) {
1039                                         error = HPI6000_ERROR_INIT_VERIFY;
1040                                         HPI_DEBUG_LOG(ERROR,
1041                                                 "DSP verify %x %x %x %x\n",
1042                                                 address, *pcode, data,
1043                                                 dsp_index);
1044                                         break;
1045                                 }
1046                                 pcode++;
1047                                 address += 4;
1048                         }
1049                         if (error)
1050                                 break;
1051                 }
1052                 hpi_dsp_code_close(&dsp_code);
1053                 if (error)
1054                         return error;
1055
1056                 /* zero out the hostmailbox */
1057                 {
1058                         u32 address = HPI_HIF_ADDR(host_cmd);
1059                         for (i = 0; i < 4; i++) {
1060                                 hpi_write_word(pdo, address, 0);
1061                                 address += 4;
1062                         }
1063                 }
1064                 /* write the DSP number into the hostmailbox */
1065                 /* structure before starting the DSP */
1066                 hpi_write_word(pdo, HPI_HIF_ADDR(dsp_number), dsp_index);
1067
1068                 /* write the DSP adapter Info into the */
1069                 /* hostmailbox before starting the DSP */
1070                 if (dsp_index > 0)
1071                         hpi_write_word(pdo, HPI_HIF_ADDR(adapter_info),
1072                                 adapter_info);
1073
1074                 /* step 3. Start code by sending interrupt */
1075                 iowrite32(0x00030003, pdo->prHPI_control);
1076                 for (i = 0; i < 10000; i++)
1077                         delay = ioread32(phw->dw2040_HPICSR + HPI_RESET);
1078
1079                 /* wait for a non-zero value in hostcmd -
1080                  * indicating initialization is complete
1081                  *
1082                  * Init could take a while if DSP checks SDRAM memory
1083                  * Was 200000. Increased to 2000000 for ASI8801 so we
1084                  * don't get 938 errors.
1085                  */
1086                 timeout = 2000000;
1087                 while (timeout) {
1088                         do {
1089                                 read = hpi_read_word(pdo,
1090                                         HPI_HIF_ADDR(host_cmd));
1091                         } while (--timeout
1092                                 && hpi6000_check_PCI2040_error_flag(pao,
1093                                         H6READ));
1094
1095                         if (read)
1096                                 break;
1097                         /* The following is a workaround for bug #94:
1098                          * Bluescreen on install and subsequent boots on a
1099                          * DELL PowerEdge 600SC PC with 1.8GHz P4 and
1100                          * ServerWorks chipset. Without this delay the system
1101                          * locks up with a bluescreen (NOT GPF or pagefault).
1102                          */
1103                         else
1104                                 hpios_delay_micro_seconds(1000);
1105                 }
1106                 if (timeout == 0)
1107                         return HPI6000_ERROR_INIT_NOACK;
1108
1109                 /* read the DSP adapter Info from the */
1110                 /* hostmailbox structure after starting the DSP */
1111                 if (dsp_index == 0) {
1112                         /*u32 dwTestData=0; */
1113                         u32 mask = 0;
1114
1115                         adapter_info =
1116                                 hpi_read_word(pdo,
1117                                 HPI_HIF_ADDR(adapter_info));
1118                         if (HPI_ADAPTER_FAMILY_ASI
1119                                 (HPI_HIF_ADAPTER_INFO_EXTRACT_ADAPTER
1120                                         (adapter_info)) ==
1121                                 HPI_ADAPTER_FAMILY_ASI(0x6200))
1122                                 /* all 6200 cards have this many DSPs */
1123                                 phw->num_dsp = 2;
1124
1125                         /* test that the PLD is programmed */
1126                         /* and we can read/write 24bits */
1127 #define PLD_BASE_ADDRESS 0x90000000L    /*for ASI6100/6200/8800 */
1128
1129                         switch (boot_load_family) {
1130                         case HPI_ADAPTER_FAMILY_ASI(0x6200):
1131                                 /* ASI6100/6200 has 24bit path to FPGA */
1132                                 mask = 0xFFFFFF00L;
1133                                 /* ASI5100 uses AX6 code, */
1134                                 /* but has no PLD r/w register to test */
1135                                 if (HPI_ADAPTER_FAMILY_ASI(pao->pci.
1136                                                 subsys_device_id) ==
1137                                         HPI_ADAPTER_FAMILY_ASI(0x5100))
1138                                         mask = 0x00000000L;
1139                                 /* ASI5200 uses AX6 code, */
1140                                 /* but has no PLD r/w register to test */
1141                                 if (HPI_ADAPTER_FAMILY_ASI(pao->pci.
1142                                                 subsys_device_id) ==
1143                                         HPI_ADAPTER_FAMILY_ASI(0x5200))
1144                                         mask = 0x00000000L;
1145                                 break;
1146                         case HPI_ADAPTER_FAMILY_ASI(0x8800):
1147                                 /* ASI8800 has 16bit path to FPGA */
1148                                 mask = 0xFFFF0000L;
1149                                 break;
1150                         }
1151                         test_data = 0xAAAAAA00L & mask;
1152                         /* write to 24 bit Debug register (D31-D8) */
1153                         hpi_write_word(pdo, PLD_BASE_ADDRESS + 4L, test_data);
1154                         read = hpi_read_word(pdo,
1155                                 PLD_BASE_ADDRESS + 4L) & mask;
1156                         if (read != test_data) {
1157                                 HPI_DEBUG_LOG(ERROR, "PLD %x %x\n", test_data,
1158                                         read);
1159                                 return HPI6000_ERROR_INIT_PLDTEST1;
1160                         }
1161                         test_data = 0x55555500L & mask;
1162                         hpi_write_word(pdo, PLD_BASE_ADDRESS + 4L, test_data);
1163                         read = hpi_read_word(pdo,
1164                                 PLD_BASE_ADDRESS + 4L) & mask;
1165                         if (read != test_data) {
1166                                 HPI_DEBUG_LOG(ERROR, "PLD %x %x\n", test_data,
1167                                         read);
1168                                 return HPI6000_ERROR_INIT_PLDTEST2;
1169                         }
1170                 }
1171         }       /* for numDSP */
1172         return 0;
1173 }
1174
1175 #define PCI_TIMEOUT 100
1176
1177 static int hpi_set_address(struct dsp_obj *pdo, u32 address)
1178 {
1179         u32 timeout = PCI_TIMEOUT;
1180
1181         do {
1182                 iowrite32(address, pdo->prHPI_address);
1183         } while (hpi6000_check_PCI2040_error_flag(pdo->pa_parent_adapter,
1184                         H6WRITE)
1185                 && --timeout);
1186
1187         if (timeout)
1188                 return 0;
1189
1190         return 1;
1191 }
1192
1193 /* write one word to the HPI port */
1194 static void hpi_write_word(struct dsp_obj *pdo, u32 address, u32 data)
1195 {
1196         if (hpi_set_address(pdo, address))
1197                 return;
1198         iowrite32(data, pdo->prHPI_data);
1199 }
1200
1201 /* read one word from the HPI port */
1202 static u32 hpi_read_word(struct dsp_obj *pdo, u32 address)
1203 {
1204         u32 data = 0;
1205
1206         if (hpi_set_address(pdo, address))
1207                 return 0;       /*? no way to return error */
1208
1209         /* take care of errata in revB DSP (2.0.1) */
1210         data = ioread32(pdo->prHPI_data);
1211         return data;
1212 }
1213
1214 /* write a block of 32bit words to the DSP HPI port using auto-inc mode */
1215 static void hpi_write_block(struct dsp_obj *pdo, u32 address, u32 *pdata,
1216         u32 length)
1217 {
1218         u16 length16 = length - 1;
1219
1220         if (length == 0)
1221                 return;
1222
1223         if (hpi_set_address(pdo, address))
1224                 return;
1225
1226         iowrite32_rep(pdo->prHPI_data_auto_inc, pdata, length16);
1227
1228         /* take care of errata in revB DSP (2.0.1) */
1229         /* must end with non auto-inc */
1230         iowrite32(*(pdata + length - 1), pdo->prHPI_data);
1231 }
1232
1233 /** read a block of 32bit words from the DSP HPI port using auto-inc mode
1234  */
1235 static void hpi_read_block(struct dsp_obj *pdo, u32 address, u32 *pdata,
1236         u32 length)
1237 {
1238         u16 length16 = length - 1;
1239
1240         if (length == 0)
1241                 return;
1242
1243         if (hpi_set_address(pdo, address))
1244                 return;
1245
1246         ioread32_rep(pdo->prHPI_data_auto_inc, pdata, length16);
1247
1248         /* take care of errata in revB DSP (2.0.1) */
1249         /* must end with non auto-inc */
1250         *(pdata + length - 1) = ioread32(pdo->prHPI_data);
1251 }
1252
1253 static u16 hpi6000_dsp_block_write32(struct hpi_adapter_obj *pao,
1254         u16 dsp_index, u32 hpi_address, u32 *source, u32 count)
1255 {
1256         struct dsp_obj *pdo =
1257                 &(*(struct hpi_hw_obj *)pao->priv).ado[dsp_index];
1258         u32 time_out = PCI_TIMEOUT;
1259         int c6711_burst_size = 128;
1260         u32 local_hpi_address = hpi_address;
1261         int local_count = count;
1262         int xfer_size;
1263         u32 *pdata = source;
1264
1265         while (local_count) {
1266                 if (local_count > c6711_burst_size)
1267                         xfer_size = c6711_burst_size;
1268                 else
1269                         xfer_size = local_count;
1270
1271                 time_out = PCI_TIMEOUT;
1272                 do {
1273                         hpi_write_block(pdo, local_hpi_address, pdata,
1274                                 xfer_size);
1275                 } while (hpi6000_check_PCI2040_error_flag(pao, H6WRITE)
1276                         && --time_out);
1277
1278                 if (!time_out)
1279                         break;
1280                 pdata += xfer_size;
1281                 local_hpi_address += sizeof(u32) * xfer_size;
1282                 local_count -= xfer_size;
1283         }
1284
1285         if (time_out)
1286                 return 0;
1287         else
1288                 return 1;
1289 }
1290
1291 static u16 hpi6000_dsp_block_read32(struct hpi_adapter_obj *pao,
1292         u16 dsp_index, u32 hpi_address, u32 *dest, u32 count)
1293 {
1294         struct dsp_obj *pdo =
1295                 &(*(struct hpi_hw_obj *)pao->priv).ado[dsp_index];
1296         u32 time_out = PCI_TIMEOUT;
1297         int c6711_burst_size = 16;
1298         u32 local_hpi_address = hpi_address;
1299         int local_count = count;
1300         int xfer_size;
1301         u32 *pdata = dest;
1302         u32 loop_count = 0;
1303
1304         while (local_count) {
1305                 if (local_count > c6711_burst_size)
1306                         xfer_size = c6711_burst_size;
1307                 else
1308                         xfer_size = local_count;
1309
1310                 time_out = PCI_TIMEOUT;
1311                 do {
1312                         hpi_read_block(pdo, local_hpi_address, pdata,
1313                                 xfer_size);
1314                 } while (hpi6000_check_PCI2040_error_flag(pao, H6READ)
1315                         && --time_out);
1316                 if (!time_out)
1317                         break;
1318
1319                 pdata += xfer_size;
1320                 local_hpi_address += sizeof(u32) * xfer_size;
1321                 local_count -= xfer_size;
1322                 loop_count++;
1323         }
1324
1325         if (time_out)
1326                 return 0;
1327         else
1328                 return 1;
1329 }
1330
1331 static short hpi6000_message_response_sequence(struct hpi_adapter_obj *pao,
1332         u16 dsp_index, struct hpi_message *phm, struct hpi_response *phr)
1333 {
1334         struct hpi_hw_obj *phw = (struct hpi_hw_obj *)pao->priv;
1335         struct dsp_obj *pdo = &phw->ado[dsp_index];
1336         u32 timeout;
1337         u16 ack;
1338         u32 address;
1339         u32 length;
1340         u32 *p_data;
1341         u16 error = 0;
1342
1343         /* does the DSP we are referencing exist? */
1344         if (dsp_index >= phw->num_dsp)
1345                 return HPI6000_ERROR_MSG_INVALID_DSP_INDEX;
1346
1347         ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_IDLE);
1348         if (ack & HPI_HIF_ERROR_MASK) {
1349                 pao->dsp_crashed++;
1350                 return HPI6000_ERROR_MSG_RESP_IDLE_TIMEOUT;
1351         }
1352         pao->dsp_crashed = 0;
1353
1354         /* send the message */
1355
1356         /* get the address and size */
1357         if (phw->message_buffer_address_on_dsp == 0) {
1358                 timeout = TIMEOUT;
1359                 do {
1360                         address =
1361                                 hpi_read_word(pdo,
1362                                 HPI_HIF_ADDR(message_buffer_address));
1363                         phw->message_buffer_address_on_dsp = address;
1364                 } while (hpi6000_check_PCI2040_error_flag(pao, H6READ)
1365                         && --timeout);
1366                 if (!timeout)
1367                         return HPI6000_ERROR_MSG_GET_ADR;
1368         } else
1369                 address = phw->message_buffer_address_on_dsp;
1370
1371         /*        dwLength = sizeof(struct hpi_message); */
1372         length = phm->size;
1373
1374         /* send it */
1375         p_data = (u32 *)phm;
1376         if (hpi6000_dsp_block_write32(pao, dsp_index, address, p_data,
1377                         (u16)length / 4))
1378                 return HPI6000_ERROR_MSG_RESP_BLOCKWRITE32;
1379
1380         if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_GET_RESP))
1381                 return HPI6000_ERROR_MSG_RESP_GETRESPCMD;
1382         hpi6000_send_dsp_interrupt(pdo);
1383
1384         ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_GET_RESP);
1385         if (ack & HPI_HIF_ERROR_MASK)
1386                 return HPI6000_ERROR_MSG_RESP_GET_RESP_ACK;
1387
1388         /* get the address and size */
1389         if (phw->response_buffer_address_on_dsp == 0) {
1390                 timeout = TIMEOUT;
1391                 do {
1392                         address =
1393                                 hpi_read_word(pdo,
1394                                 HPI_HIF_ADDR(response_buffer_address));
1395                 } while (hpi6000_check_PCI2040_error_flag(pao, H6READ)
1396                         && --timeout);
1397                 phw->response_buffer_address_on_dsp = address;
1398
1399                 if (!timeout)
1400                         return HPI6000_ERROR_RESP_GET_ADR;
1401         } else
1402                 address = phw->response_buffer_address_on_dsp;
1403
1404         /* read the length of the response back from the DSP */
1405         timeout = TIMEOUT;
1406         do {
1407                 length = hpi_read_word(pdo, HPI_HIF_ADDR(length));
1408         } while (hpi6000_check_PCI2040_error_flag(pao, H6READ) && --timeout);
1409         if (!timeout)
1410                 length = sizeof(struct hpi_response);
1411
1412         /* get it */
1413         p_data = (u32 *)phr;
1414         if (hpi6000_dsp_block_read32(pao, dsp_index, address, p_data,
1415                         (u16)length / 4))
1416                 return HPI6000_ERROR_MSG_RESP_BLOCKREAD32;
1417
1418         /* set i/f back to idle */
1419         if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_IDLE))
1420                 return HPI6000_ERROR_MSG_RESP_IDLECMD;
1421         hpi6000_send_dsp_interrupt(pdo);
1422
1423         error = hpi_validate_response(phm, phr);
1424         return error;
1425 }
1426
1427 /* have to set up the below defines to match stuff in the MAP file */
1428
1429 #define MSG_ADDRESS (HPI_HIF_BASE+0x18)
1430 #define MSG_LENGTH 11
1431 #define RESP_ADDRESS (HPI_HIF_BASE+0x44)
1432 #define RESP_LENGTH 16
1433 #define QUEUE_START  (HPI_HIF_BASE+0x88)
1434 #define QUEUE_SIZE 0x8000
1435
1436 static short hpi6000_send_data_check_adr(u32 address, u32 length_in_dwords)
1437 {
1438 /*#define CHECKING       // comment this line in to enable checking */
1439 #ifdef CHECKING
1440         if (address < (u32)MSG_ADDRESS)
1441                 return 0;
1442         if (address > (u32)(QUEUE_START + QUEUE_SIZE))
1443                 return 0;
1444         if ((address + (length_in_dwords << 2)) >
1445                 (u32)(QUEUE_START + QUEUE_SIZE))
1446                 return 0;
1447 #else
1448         (void)address;
1449         (void)length_in_dwords;
1450         return 1;
1451 #endif
1452 }
1453
1454 static short hpi6000_send_data(struct hpi_adapter_obj *pao, u16 dsp_index,
1455         struct hpi_message *phm, struct hpi_response *phr)
1456 {
1457         struct dsp_obj *pdo =
1458                 &(*(struct hpi_hw_obj *)pao->priv).ado[dsp_index];
1459         u32 data_sent = 0;
1460         u16 ack;
1461         u32 length, address;
1462         u32 *p_data = (u32 *)phm->u.d.u.data.pb_data;
1463         u16 time_out = 8;
1464
1465         (void)phr;
1466
1467         /* round dwDataSize down to nearest 4 bytes */
1468         while ((data_sent < (phm->u.d.u.data.data_size & ~3L))
1469                 && --time_out) {
1470                 ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_IDLE);
1471                 if (ack & HPI_HIF_ERROR_MASK)
1472                         return HPI6000_ERROR_SEND_DATA_IDLE_TIMEOUT;
1473
1474                 if (hpi6000_send_host_command(pao, dsp_index,
1475                                 HPI_HIF_SEND_DATA))
1476                         return HPI6000_ERROR_SEND_DATA_CMD;
1477
1478                 hpi6000_send_dsp_interrupt(pdo);
1479
1480                 ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_SEND_DATA);
1481
1482                 if (ack & HPI_HIF_ERROR_MASK)
1483                         return HPI6000_ERROR_SEND_DATA_ACK;
1484
1485                 do {
1486                         /* get the address and size */
1487                         address = hpi_read_word(pdo, HPI_HIF_ADDR(address));
1488                         /* DSP returns number of DWORDS */
1489                         length = hpi_read_word(pdo, HPI_HIF_ADDR(length));
1490                 } while (hpi6000_check_PCI2040_error_flag(pao, H6READ));
1491
1492                 if (!hpi6000_send_data_check_adr(address, length))
1493                         return HPI6000_ERROR_SEND_DATA_ADR;
1494
1495                 /* send the data. break data into 512 DWORD blocks (2K bytes)
1496                  * and send using block write. 2Kbytes is the max as this is the
1497                  * memory window given to the HPI data register by the PCI2040
1498                  */
1499
1500                 {
1501                         u32 len = length;
1502                         u32 blk_len = 512;
1503                         while (len) {
1504                                 if (len < blk_len)
1505                                         blk_len = len;
1506                                 if (hpi6000_dsp_block_write32(pao, dsp_index,
1507                                                 address, p_data, blk_len))
1508                                         return HPI6000_ERROR_SEND_DATA_WRITE;
1509                                 address += blk_len * 4;
1510                                 p_data += blk_len;
1511                                 len -= blk_len;
1512                         }
1513                 }
1514
1515                 if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_IDLE))
1516                         return HPI6000_ERROR_SEND_DATA_IDLECMD;
1517
1518                 hpi6000_send_dsp_interrupt(pdo);
1519
1520                 data_sent += length * 4;
1521         }
1522         if (!time_out)
1523                 return HPI6000_ERROR_SEND_DATA_TIMEOUT;
1524         return 0;
1525 }
1526
1527 static short hpi6000_get_data(struct hpi_adapter_obj *pao, u16 dsp_index,
1528         struct hpi_message *phm, struct hpi_response *phr)
1529 {
1530         struct dsp_obj *pdo =
1531                 &(*(struct hpi_hw_obj *)pao->priv).ado[dsp_index];
1532         u32 data_got = 0;
1533         u16 ack;
1534         u32 length, address;
1535         u32 *p_data = (u32 *)phm->u.d.u.data.pb_data;
1536
1537         (void)phr;      /* this parameter not used! */
1538
1539         /* round dwDataSize down to nearest 4 bytes */
1540         while (data_got < (phm->u.d.u.data.data_size & ~3L)) {
1541                 ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_IDLE);
1542                 if (ack & HPI_HIF_ERROR_MASK)
1543                         return HPI6000_ERROR_GET_DATA_IDLE_TIMEOUT;
1544
1545                 if (hpi6000_send_host_command(pao, dsp_index,
1546                                 HPI_HIF_GET_DATA))
1547                         return HPI6000_ERROR_GET_DATA_CMD;
1548                 hpi6000_send_dsp_interrupt(pdo);
1549
1550                 ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_GET_DATA);
1551
1552                 if (ack & HPI_HIF_ERROR_MASK)
1553                         return HPI6000_ERROR_GET_DATA_ACK;
1554
1555                 /* get the address and size */
1556                 do {
1557                         address = hpi_read_word(pdo, HPI_HIF_ADDR(address));
1558                         length = hpi_read_word(pdo, HPI_HIF_ADDR(length));
1559                 } while (hpi6000_check_PCI2040_error_flag(pao, H6READ));
1560
1561                 /* read the data */
1562                 {
1563                         u32 len = length;
1564                         u32 blk_len = 512;
1565                         while (len) {
1566                                 if (len < blk_len)
1567                                         blk_len = len;
1568                                 if (hpi6000_dsp_block_read32(pao, dsp_index,
1569                                                 address, p_data, blk_len))
1570                                         return HPI6000_ERROR_GET_DATA_READ;
1571                                 address += blk_len * 4;
1572                                 p_data += blk_len;
1573                                 len -= blk_len;
1574                         }
1575                 }
1576
1577                 if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_IDLE))
1578                         return HPI6000_ERROR_GET_DATA_IDLECMD;
1579                 hpi6000_send_dsp_interrupt(pdo);
1580
1581                 data_got += length * 4;
1582         }
1583         return 0;
1584 }
1585
1586 static void hpi6000_send_dsp_interrupt(struct dsp_obj *pdo)
1587 {
1588         iowrite32(0x00030003, pdo->prHPI_control);      /* DSPINT */
1589 }
1590
1591 static short hpi6000_send_host_command(struct hpi_adapter_obj *pao,
1592         u16 dsp_index, u32 host_cmd)
1593 {
1594         struct dsp_obj *pdo =
1595                 &(*(struct hpi_hw_obj *)pao->priv).ado[dsp_index];
1596         u32 timeout = TIMEOUT;
1597
1598         /* set command */
1599         do {
1600                 hpi_write_word(pdo, HPI_HIF_ADDR(host_cmd), host_cmd);
1601                 /* flush the FIFO */
1602                 hpi_set_address(pdo, HPI_HIF_ADDR(host_cmd));
1603         } while (hpi6000_check_PCI2040_error_flag(pao, H6WRITE) && --timeout);
1604
1605         /* reset the interrupt bit */
1606         iowrite32(0x00040004, pdo->prHPI_control);
1607
1608         if (timeout)
1609                 return 0;
1610         else
1611                 return 1;
1612 }
1613
1614 /* if the PCI2040 has recorded an HPI timeout, reset the error and return 1 */
1615 static short hpi6000_check_PCI2040_error_flag(struct hpi_adapter_obj *pao,
1616         u16 read_or_write)
1617 {
1618         u32 hPI_error;
1619
1620         struct hpi_hw_obj *phw = (struct hpi_hw_obj *)pao->priv;
1621
1622         /* read the error bits from the PCI2040 */
1623         hPI_error = ioread32(phw->dw2040_HPICSR + HPI_ERROR_REPORT);
1624         if (hPI_error) {
1625                 /* reset the error flag */
1626                 iowrite32(0L, phw->dw2040_HPICSR + HPI_ERROR_REPORT);
1627                 phw->pCI2040HPI_error_count++;
1628                 if (read_or_write == 1)
1629                         gw_pci_read_asserts++;     /************* inc global */
1630                 else
1631                         gw_pci_write_asserts++;
1632                 return 1;
1633         } else
1634                 return 0;
1635 }
1636
1637 static short hpi6000_wait_dsp_ack(struct hpi_adapter_obj *pao, u16 dsp_index,
1638         u32 ack_value)
1639 {
1640         struct dsp_obj *pdo =
1641                 &(*(struct hpi_hw_obj *)pao->priv).ado[dsp_index];
1642         u32 ack = 0L;
1643         u32 timeout;
1644         u32 hPIC = 0L;
1645
1646         /* wait for host interrupt to signal ack is ready */
1647         timeout = TIMEOUT;
1648         while (--timeout) {
1649                 hPIC = ioread32(pdo->prHPI_control);
1650                 if (hPIC & 0x04)        /* 0x04 = HINT from DSP */
1651                         break;
1652         }
1653         if (timeout == 0)
1654                 return HPI_HIF_ERROR_MASK;
1655
1656         /* wait for dwAckValue */
1657         timeout = TIMEOUT;
1658         while (--timeout) {
1659                 /* read the ack mailbox */
1660                 ack = hpi_read_word(pdo, HPI_HIF_ADDR(dsp_ack));
1661                 if (ack == ack_value)
1662                         break;
1663                 if ((ack & HPI_HIF_ERROR_MASK)
1664                         && !hpi6000_check_PCI2040_error_flag(pao, H6READ))
1665                         break;
1666                 /*for (i=0;i<1000;i++) */
1667                 /*      dwPause=i+1; */
1668         }
1669         if (ack & HPI_HIF_ERROR_MASK)
1670                 /* indicates bad read from DSP -
1671                    typically 0xffffff is read for some reason */
1672                 ack = HPI_HIF_ERROR_MASK;
1673
1674         if (timeout == 0)
1675                 ack = HPI_HIF_ERROR_MASK;
1676         return (short)ack;
1677 }
1678
1679 static short hpi6000_update_control_cache(struct hpi_adapter_obj *pao,
1680         struct hpi_message *phm)
1681 {
1682         const u16 dsp_index = 0;
1683         struct hpi_hw_obj *phw = (struct hpi_hw_obj *)pao->priv;
1684         struct dsp_obj *pdo = &phw->ado[dsp_index];
1685         u32 timeout;
1686         u32 cache_dirty_flag;
1687         u16 err;
1688
1689         hpios_dsplock_lock(pao);
1690
1691         timeout = TIMEOUT;
1692         do {
1693                 cache_dirty_flag =
1694                         hpi_read_word((struct dsp_obj *)pdo,
1695                         HPI_HIF_ADDR(control_cache_is_dirty));
1696         } while (hpi6000_check_PCI2040_error_flag(pao, H6READ) && --timeout);
1697         if (!timeout) {
1698                 err = HPI6000_ERROR_CONTROL_CACHE_PARAMS;
1699                 goto unlock;
1700         }
1701
1702         if (cache_dirty_flag) {
1703                 /* read the cached controls */
1704                 u32 address;
1705                 u32 length;
1706
1707                 timeout = TIMEOUT;
1708                 if (pdo->control_cache_address_on_dsp == 0) {
1709                         do {
1710                                 address =
1711                                         hpi_read_word((struct dsp_obj *)pdo,
1712                                         HPI_HIF_ADDR(control_cache_address));
1713
1714                                 length = hpi_read_word((struct dsp_obj *)pdo,
1715                                         HPI_HIF_ADDR
1716                                         (control_cache_size_in_bytes));
1717                         } while (hpi6000_check_PCI2040_error_flag(pao, H6READ)
1718                                 && --timeout);
1719                         if (!timeout) {
1720                                 err = HPI6000_ERROR_CONTROL_CACHE_ADDRLEN;
1721                                 goto unlock;
1722                         }
1723                         pdo->control_cache_address_on_dsp = address;
1724                         pdo->control_cache_length_on_dsp = length;
1725                 } else {
1726                         address = pdo->control_cache_address_on_dsp;
1727                         length = pdo->control_cache_length_on_dsp;
1728                 }
1729
1730                 if (hpi6000_dsp_block_read32(pao, dsp_index, address,
1731                                 (u32 *)&phw->control_cache[0],
1732                                 length / sizeof(u32))) {
1733                         err = HPI6000_ERROR_CONTROL_CACHE_READ;
1734                         goto unlock;
1735                 }
1736                 do {
1737                         hpi_write_word((struct dsp_obj *)pdo,
1738                                 HPI_HIF_ADDR(control_cache_is_dirty), 0);
1739                         /* flush the FIFO */
1740                         hpi_set_address(pdo, HPI_HIF_ADDR(host_cmd));
1741                 } while (hpi6000_check_PCI2040_error_flag(pao, H6WRITE)
1742                         && --timeout);
1743                 if (!timeout) {
1744                         err = HPI6000_ERROR_CONTROL_CACHE_FLUSH;
1745                         goto unlock;
1746                 }
1747
1748         }
1749         err = 0;
1750
1751 unlock:
1752         hpios_dsplock_unlock(pao);
1753         return err;
1754 }
1755
1756 /** Get dsp index for multi DSP adapters only */
1757 static u16 get_dsp_index(struct hpi_adapter_obj *pao, struct hpi_message *phm)
1758 {
1759         u16 ret = 0;
1760         switch (phm->object) {
1761         case HPI_OBJ_ISTREAM:
1762                 if (phm->obj_index < 2)
1763                         ret = 1;
1764                 break;
1765         case HPI_OBJ_PROFILE:
1766                 ret = phm->obj_index;
1767                 break;
1768         default:
1769                 break;
1770         }
1771         return ret;
1772 }
1773
1774 /** Complete transaction with DSP
1775
1776 Send message, get response, send or get stream data if any.
1777 */
1778 static void hw_message(struct hpi_adapter_obj *pao, struct hpi_message *phm,
1779         struct hpi_response *phr)
1780 {
1781         u16 error = 0;
1782         u16 dsp_index = 0;
1783         u16 num_dsp = ((struct hpi_hw_obj *)pao->priv)->num_dsp;
1784
1785         if (num_dsp < 2)
1786                 dsp_index = 0;
1787         else {
1788                 dsp_index = get_dsp_index(pao, phm);
1789
1790                 /* is this  checked on the DSP anyway? */
1791                 if ((phm->function == HPI_ISTREAM_GROUP_ADD)
1792                         || (phm->function == HPI_OSTREAM_GROUP_ADD)) {
1793                         struct hpi_message hm;
1794                         u16 add_index;
1795                         hm.obj_index = phm->u.d.u.stream.stream_index;
1796                         hm.object = phm->u.d.u.stream.object_type;
1797                         add_index = get_dsp_index(pao, &hm);
1798                         if (add_index != dsp_index) {
1799                                 phr->error = HPI_ERROR_NO_INTERDSP_GROUPS;
1800                                 return;
1801                         }
1802                 }
1803         }
1804
1805         hpios_dsplock_lock(pao);
1806         error = hpi6000_message_response_sequence(pao, dsp_index, phm, phr);
1807
1808         /* maybe an error response */
1809         if (error) {
1810                 /* something failed in the HPI/DSP interface */
1811                 phr->error = error;
1812                 /* just the header of the response is valid */
1813                 phr->size = sizeof(struct hpi_response_header);
1814                 goto err;
1815         }
1816
1817         if (phr->error != 0)    /* something failed in the DSP */
1818                 goto err;
1819
1820         switch (phm->function) {
1821         case HPI_OSTREAM_WRITE:
1822         case HPI_ISTREAM_ANC_WRITE:
1823                 error = hpi6000_send_data(pao, dsp_index, phm, phr);
1824                 break;
1825         case HPI_ISTREAM_READ:
1826         case HPI_OSTREAM_ANC_READ:
1827                 error = hpi6000_get_data(pao, dsp_index, phm, phr);
1828                 break;
1829         case HPI_ADAPTER_GET_ASSERT:
1830                 phr->u.a.adapter_index = 0;     /* dsp 0 default */
1831                 if (num_dsp == 2) {
1832                         if (!phr->u.a.adapter_type) {
1833                                 /* no assert from dsp 0, check dsp 1 */
1834                                 error = hpi6000_message_response_sequence(pao,
1835                                         1, phm, phr);
1836                                 phr->u.a.adapter_index = 1;
1837                         }
1838                 }
1839         }
1840
1841         if (error)
1842                 phr->error = error;
1843
1844 err:
1845         hpios_dsplock_unlock(pao);
1846         return;
1847 }