Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
[pandora-kernel.git] / include / linux / virtio_net.h
1 #ifndef _LINUX_VIRTIO_NET_H
2 #define _LINUX_VIRTIO_NET_H
3 /* This header is BSD licensed so anyone can use the definitions to implement
4  * compatible drivers/servers. */
5 #include <linux/types.h>
6 #include <linux/virtio_ids.h>
7 #include <linux/virtio_config.h>
8 #include <linux/if_ether.h>
9
10 /* The feature bitmap for virtio net */
11 #define VIRTIO_NET_F_CSUM       0       /* Host handles pkts w/ partial csum */
12 #define VIRTIO_NET_F_GUEST_CSUM 1       /* Guest handles pkts w/ partial csum */
13 #define VIRTIO_NET_F_MAC        5       /* Host has given MAC address. */
14 #define VIRTIO_NET_F_GSO        6       /* Host handles pkts w/ any GSO type */
15 #define VIRTIO_NET_F_GUEST_TSO4 7       /* Guest can handle TSOv4 in. */
16 #define VIRTIO_NET_F_GUEST_TSO6 8       /* Guest can handle TSOv6 in. */
17 #define VIRTIO_NET_F_GUEST_ECN  9       /* Guest can handle TSO[6] w/ ECN in. */
18 #define VIRTIO_NET_F_GUEST_UFO  10      /* Guest can handle UFO in. */
19 #define VIRTIO_NET_F_HOST_TSO4  11      /* Host can handle TSOv4 in. */
20 #define VIRTIO_NET_F_HOST_TSO6  12      /* Host can handle TSOv6 in. */
21 #define VIRTIO_NET_F_HOST_ECN   13      /* Host can handle TSO[6] w/ ECN in. */
22 #define VIRTIO_NET_F_HOST_UFO   14      /* Host can handle UFO in. */
23 #define VIRTIO_NET_F_MRG_RXBUF  15      /* Host can merge receive buffers. */
24 #define VIRTIO_NET_F_STATUS     16      /* virtio_net_config.status available */
25 #define VIRTIO_NET_F_CTRL_VQ    17      /* Control channel available */
26 #define VIRTIO_NET_F_CTRL_RX    18      /* Control channel RX mode support */
27 #define VIRTIO_NET_F_CTRL_VLAN  19      /* Control channel VLAN filtering */
28 #define VIRTIO_NET_F_CTRL_RX_EXTRA 20   /* Extra RX mode control support */
29
30 #define VIRTIO_NET_S_LINK_UP    1       /* Link is up */
31
32 struct virtio_net_config {
33         /* The config defining mac address (if VIRTIO_NET_F_MAC) */
34         __u8 mac[6];
35         /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
36         __u16 status;
37 } __attribute__((packed));
38
39 /* This is the first element of the scatter-gather list.  If you don't
40  * specify GSO or CSUM features, you can simply ignore the header. */
41 struct virtio_net_hdr {
42 #define VIRTIO_NET_HDR_F_NEEDS_CSUM     1       // Use csum_start, csum_offset
43         __u8 flags;
44 #define VIRTIO_NET_HDR_GSO_NONE         0       // Not a GSO frame
45 #define VIRTIO_NET_HDR_GSO_TCPV4        1       // GSO frame, IPv4 TCP (TSO)
46 #define VIRTIO_NET_HDR_GSO_UDP          3       // GSO frame, IPv4 UDP (UFO)
47 #define VIRTIO_NET_HDR_GSO_TCPV6        4       // GSO frame, IPv6 TCP
48 #define VIRTIO_NET_HDR_GSO_ECN          0x80    // TCP has ECN set
49         __u8 gso_type;
50         __u16 hdr_len;          /* Ethernet + IP + tcp/udp hdrs */
51         __u16 gso_size;         /* Bytes to append to hdr_len per frame */
52         __u16 csum_start;       /* Position to start checksumming from */
53         __u16 csum_offset;      /* Offset after that to place checksum */
54 };
55
56 /* This is the version of the header to use when the MRG_RXBUF
57  * feature has been negotiated. */
58 struct virtio_net_hdr_mrg_rxbuf {
59         struct virtio_net_hdr hdr;
60         __u16 num_buffers;      /* Number of merged rx buffers */
61 };
62
63 /*
64  * Control virtqueue data structures
65  *
66  * The control virtqueue expects a header in the first sg entry
67  * and an ack/status response in the last entry.  Data for the
68  * command goes in between.
69  */
70 struct virtio_net_ctrl_hdr {
71         __u8 class;
72         __u8 cmd;
73 } __attribute__((packed));
74
75 typedef __u8 virtio_net_ctrl_ack;
76
77 #define VIRTIO_NET_OK     0
78 #define VIRTIO_NET_ERR    1
79
80 /*
81  * Control the RX mode, ie. promisucous, allmulti, etc...
82  * All commands require an "out" sg entry containing a 1 byte
83  * state value, zero = disable, non-zero = enable.  Commands
84  * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
85  * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
86  */
87 #define VIRTIO_NET_CTRL_RX    0
88  #define VIRTIO_NET_CTRL_RX_PROMISC      0
89  #define VIRTIO_NET_CTRL_RX_ALLMULTI     1
90  #define VIRTIO_NET_CTRL_RX_ALLUNI       2
91  #define VIRTIO_NET_CTRL_RX_NOMULTI      3
92  #define VIRTIO_NET_CTRL_RX_NOUNI        4
93  #define VIRTIO_NET_CTRL_RX_NOBCAST      5
94
95 /*
96  * Control the MAC filter table.
97  *
98  * The MAC filter table is managed by the hypervisor, the guest should
99  * assume the size is infinite.  Filtering should be considered
100  * non-perfect, ie. based on hypervisor resources, the guest may
101  * received packets from sources not specified in the filter list.
102  *
103  * In addition to the class/cmd header, the TABLE_SET command requires
104  * two out scatterlists.  Each contains a 4 byte count of entries followed
105  * by a concatenated byte stream of the ETH_ALEN MAC addresses.  The
106  * first sg list contains unicast addresses, the second is for multicast.
107  * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
108  * is available.
109  */
110 struct virtio_net_ctrl_mac {
111         __u32 entries;
112         __u8 macs[][ETH_ALEN];
113 } __attribute__((packed));
114
115 #define VIRTIO_NET_CTRL_MAC    1
116  #define VIRTIO_NET_CTRL_MAC_TABLE_SET        0
117
118 /*
119  * Control VLAN filtering
120  *
121  * The VLAN filter table is controlled via a simple ADD/DEL interface.
122  * VLAN IDs not added may be filterd by the hypervisor.  Del is the
123  * opposite of add.  Both commands expect an out entry containing a 2
124  * byte VLAN ID.  VLAN filterting is available with the
125  * VIRTIO_NET_F_CTRL_VLAN feature bit.
126  */
127 #define VIRTIO_NET_CTRL_VLAN       2
128  #define VIRTIO_NET_CTRL_VLAN_ADD             0
129  #define VIRTIO_NET_CTRL_VLAN_DEL             1
130
131 #endif /* _LINUX_VIRTIO_NET_H */