mm: Export migrate_page_move_mapping and migrate_page_copy
[pandora-kernel.git] / include / linux / interrupt.h
1 /* interrupt.h */
2 #ifndef _LINUX_INTERRUPT_H
3 #define _LINUX_INTERRUPT_H
4
5 #include <linux/kernel.h>
6 #include <linux/linkage.h>
7 #include <linux/bitops.h>
8 #include <linux/preempt.h>
9 #include <linux/cpumask.h>
10 #include <linux/irqreturn.h>
11 #include <linux/irqnr.h>
12 #include <linux/hardirq.h>
13 #include <linux/irqflags.h>
14 #include <linux/smp.h>
15 #include <linux/percpu.h>
16 #include <linux/hrtimer.h>
17 #include <linux/kref.h>
18 #include <linux/workqueue.h>
19
20 #include <linux/atomic.h>
21 #include <asm/ptrace.h>
22 #include <asm/system.h>
23 #include <trace/events/irq.h>
24
25 /*
26  * These correspond to the IORESOURCE_IRQ_* defines in
27  * linux/ioport.h to select the interrupt line behaviour.  When
28  * requesting an interrupt without specifying a IRQF_TRIGGER, the
29  * setting should be assumed to be "as already configured", which
30  * may be as per machine or firmware initialisation.
31  */
32 #define IRQF_TRIGGER_NONE       0x00000000
33 #define IRQF_TRIGGER_RISING     0x00000001
34 #define IRQF_TRIGGER_FALLING    0x00000002
35 #define IRQF_TRIGGER_HIGH       0x00000004
36 #define IRQF_TRIGGER_LOW        0x00000008
37 #define IRQF_TRIGGER_MASK       (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \
38                                  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
39 #define IRQF_TRIGGER_PROBE      0x00000010
40
41 /*
42  * These flags used only by the kernel as part of the
43  * irq handling routines.
44  *
45  * IRQF_DISABLED - keep irqs disabled when calling the action handler.
46  *                 DEPRECATED. This flag is a NOOP and scheduled to be removed
47  * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator
48  * IRQF_SHARED - allow sharing the irq among several devices
49  * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
50  * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
51  * IRQF_PERCPU - Interrupt is per cpu
52  * IRQF_NOBALANCING - Flag to exclude this interrupt from irq balancing
53  * IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is
54  *                registered first in an shared interrupt is considered for
55  *                performance reasons)
56  * IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished.
57  *                Used by threaded interrupts which need to keep the
58  *                irq line disabled until the threaded handler has been run.
59  * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend
60  * IRQF_FORCE_RESUME - Force enable it on resume even if IRQF_NO_SUSPEND is set
61  * IRQF_NO_THREAD - Interrupt cannot be threaded
62  * IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device
63  *                resume time.
64  */
65 #define IRQF_DISABLED           0x00000020
66 #define IRQF_SAMPLE_RANDOM      0x00000040
67 #define IRQF_SHARED             0x00000080
68 #define IRQF_PROBE_SHARED       0x00000100
69 #define __IRQF_TIMER            0x00000200
70 #define IRQF_PERCPU             0x00000400
71 #define IRQF_NOBALANCING        0x00000800
72 #define IRQF_IRQPOLL            0x00001000
73 #define IRQF_ONESHOT            0x00002000
74 #define IRQF_NO_SUSPEND         0x00004000
75 #define IRQF_FORCE_RESUME       0x00008000
76 #define IRQF_NO_THREAD          0x00010000
77 #define IRQF_EARLY_RESUME       0x00020000
78
79 #define IRQF_TIMER              (__IRQF_TIMER | IRQF_NO_SUSPEND | IRQF_NO_THREAD)
80
81 /*
82  * These values can be returned by request_any_context_irq() and
83  * describe the context the interrupt will be run in.
84  *
85  * IRQC_IS_HARDIRQ - interrupt runs in hardirq context
86  * IRQC_IS_NESTED - interrupt runs in a nested threaded context
87  */
88 enum {
89         IRQC_IS_HARDIRQ = 0,
90         IRQC_IS_NESTED,
91 };
92
93 typedef irqreturn_t (*irq_handler_t)(int, void *);
94
95 /**
96  * struct irqaction - per interrupt action descriptor
97  * @handler:    interrupt handler function
98  * @flags:      flags (see IRQF_* above)
99  * @name:       name of the device
100  * @dev_id:     cookie to identify the device
101  * @percpu_dev_id:      cookie to identify the device
102  * @next:       pointer to the next irqaction for shared interrupts
103  * @irq:        interrupt number
104  * @dir:        pointer to the proc/irq/NN/name entry
105  * @thread_fn:  interrupt handler function for threaded interrupts
106  * @thread:     thread pointer for threaded interrupts
107  * @thread_flags:       flags related to @thread
108  * @thread_mask:        bitmask for keeping track of @thread activity
109  */
110 struct irqaction {
111         irq_handler_t           handler;
112         unsigned long           flags;
113         void                    *dev_id;
114         void __percpu           *percpu_dev_id;
115         struct irqaction        *next;
116         int                     irq;
117         irq_handler_t           thread_fn;
118         struct task_struct      *thread;
119         unsigned long           thread_flags;
120         unsigned long           thread_mask;
121         const char              *name;
122         struct proc_dir_entry   *dir;
123 } ____cacheline_internodealigned_in_smp;
124
125 extern irqreturn_t no_action(int cpl, void *dev_id);
126
127 #ifdef CONFIG_GENERIC_HARDIRQS
128 extern int __must_check
129 request_threaded_irq(unsigned int irq, irq_handler_t handler,
130                      irq_handler_t thread_fn,
131                      unsigned long flags, const char *name, void *dev);
132
133 static inline int __must_check
134 request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags,
135             const char *name, void *dev)
136 {
137         return request_threaded_irq(irq, handler, NULL, flags, name, dev);
138 }
139
140 extern int __must_check
141 request_any_context_irq(unsigned int irq, irq_handler_t handler,
142                         unsigned long flags, const char *name, void *dev_id);
143
144 extern int __must_check
145 request_percpu_irq(unsigned int irq, irq_handler_t handler,
146                    const char *devname, void __percpu *percpu_dev_id);
147
148 extern void exit_irq_thread(void);
149 #else
150
151 extern int __must_check
152 request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags,
153             const char *name, void *dev);
154
155 /*
156  * Special function to avoid ifdeffery in kernel/irq/devres.c which
157  * gets magically built by GENERIC_HARDIRQS=n architectures (sparc,
158  * m68k). I really love these $@%#!* obvious Makefile references:
159  * ../../../kernel/irq/devres.o
160  */
161 static inline int __must_check
162 request_threaded_irq(unsigned int irq, irq_handler_t handler,
163                      irq_handler_t thread_fn,
164                      unsigned long flags, const char *name, void *dev)
165 {
166         return request_irq(irq, handler, flags, name, dev);
167 }
168
169 static inline int __must_check
170 request_any_context_irq(unsigned int irq, irq_handler_t handler,
171                         unsigned long flags, const char *name, void *dev_id)
172 {
173         return request_irq(irq, handler, flags, name, dev_id);
174 }
175
176 static inline int __must_check
177 request_percpu_irq(unsigned int irq, irq_handler_t handler,
178                    const char *devname, void __percpu *percpu_dev_id)
179 {
180         return request_irq(irq, handler, 0, devname, percpu_dev_id);
181 }
182
183 static inline void exit_irq_thread(void) { }
184 #endif
185
186 extern void free_irq(unsigned int, void *);
187 extern void free_percpu_irq(unsigned int, void __percpu *);
188
189 struct device;
190
191 extern int __must_check
192 devm_request_threaded_irq(struct device *dev, unsigned int irq,
193                           irq_handler_t handler, irq_handler_t thread_fn,
194                           unsigned long irqflags, const char *devname,
195                           void *dev_id);
196
197 static inline int __must_check
198 devm_request_irq(struct device *dev, unsigned int irq, irq_handler_t handler,
199                  unsigned long irqflags, const char *devname, void *dev_id)
200 {
201         return devm_request_threaded_irq(dev, irq, handler, NULL, irqflags,
202                                          devname, dev_id);
203 }
204
205 extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id);
206
207 /*
208  * On lockdep we dont want to enable hardirqs in hardirq
209  * context. Use local_irq_enable_in_hardirq() to annotate
210  * kernel code that has to do this nevertheless (pretty much
211  * the only valid case is for old/broken hardware that is
212  * insanely slow).
213  *
214  * NOTE: in theory this might break fragile code that relies
215  * on hardirq delivery - in practice we dont seem to have such
216  * places left. So the only effect should be slightly increased
217  * irqs-off latencies.
218  */
219 #ifdef CONFIG_LOCKDEP
220 # define local_irq_enable_in_hardirq()  do { } while (0)
221 #else
222 # define local_irq_enable_in_hardirq()  local_irq_enable()
223 #endif
224
225 extern void disable_irq_nosync(unsigned int irq);
226 extern void disable_irq(unsigned int irq);
227 extern void disable_percpu_irq(unsigned int irq);
228 extern void enable_irq(unsigned int irq);
229 extern void enable_percpu_irq(unsigned int irq, unsigned int type);
230
231 /* The following three functions are for the core kernel use only. */
232 #ifdef CONFIG_GENERIC_HARDIRQS
233 extern void suspend_device_irqs(void);
234 extern void resume_device_irqs(void);
235 #ifdef CONFIG_PM_SLEEP
236 extern int check_wakeup_irqs(void);
237 #else
238 static inline int check_wakeup_irqs(void) { return 0; }
239 #endif
240 #else
241 static inline void suspend_device_irqs(void) { };
242 static inline void resume_device_irqs(void) { };
243 static inline int check_wakeup_irqs(void) { return 0; }
244 #endif
245
246 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
247
248 extern cpumask_var_t irq_default_affinity;
249
250 extern int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask);
251 extern int irq_can_set_affinity(unsigned int irq);
252 extern int irq_select_affinity(unsigned int irq);
253
254 extern int irq_set_affinity_hint(unsigned int irq, const struct cpumask *m);
255
256 /**
257  * struct irq_affinity_notify - context for notification of IRQ affinity changes
258  * @irq:                Interrupt to which notification applies
259  * @kref:               Reference count, for internal use
260  * @work:               Work item, for internal use
261  * @notify:             Function to be called on change.  This will be
262  *                      called in process context.
263  * @release:            Function to be called on release.  This will be
264  *                      called in process context.  Once registered, the
265  *                      structure must only be freed when this function is
266  *                      called or later.
267  */
268 struct irq_affinity_notify {
269         unsigned int irq;
270         struct kref kref;
271         struct work_struct work;
272         void (*notify)(struct irq_affinity_notify *, const cpumask_t *mask);
273         void (*release)(struct kref *ref);
274 };
275
276 extern int
277 irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify);
278
279 static inline void irq_run_affinity_notifiers(void)
280 {
281         flush_scheduled_work();
282 }
283
284 #else /* CONFIG_SMP */
285
286 static inline int irq_set_affinity(unsigned int irq, const struct cpumask *m)
287 {
288         return -EINVAL;
289 }
290
291 static inline int irq_can_set_affinity(unsigned int irq)
292 {
293         return 0;
294 }
295
296 static inline int irq_select_affinity(unsigned int irq)  { return 0; }
297
298 static inline int irq_set_affinity_hint(unsigned int irq,
299                                         const struct cpumask *m)
300 {
301         return -EINVAL;
302 }
303 #endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */
304
305 #ifdef CONFIG_GENERIC_HARDIRQS
306 /*
307  * Special lockdep variants of irq disabling/enabling.
308  * These should be used for locking constructs that
309  * know that a particular irq context which is disabled,
310  * and which is the only irq-context user of a lock,
311  * that it's safe to take the lock in the irq-disabled
312  * section without disabling hardirqs.
313  *
314  * On !CONFIG_LOCKDEP they are equivalent to the normal
315  * irq disable/enable methods.
316  */
317 static inline void disable_irq_nosync_lockdep(unsigned int irq)
318 {
319         disable_irq_nosync(irq);
320 #ifdef CONFIG_LOCKDEP
321         local_irq_disable();
322 #endif
323 }
324
325 static inline void disable_irq_nosync_lockdep_irqsave(unsigned int irq, unsigned long *flags)
326 {
327         disable_irq_nosync(irq);
328 #ifdef CONFIG_LOCKDEP
329         local_irq_save(*flags);
330 #endif
331 }
332
333 static inline void disable_irq_lockdep(unsigned int irq)
334 {
335         disable_irq(irq);
336 #ifdef CONFIG_LOCKDEP
337         local_irq_disable();
338 #endif
339 }
340
341 static inline void enable_irq_lockdep(unsigned int irq)
342 {
343 #ifdef CONFIG_LOCKDEP
344         local_irq_enable();
345 #endif
346         enable_irq(irq);
347 }
348
349 static inline void enable_irq_lockdep_irqrestore(unsigned int irq, unsigned long *flags)
350 {
351 #ifdef CONFIG_LOCKDEP
352         local_irq_restore(*flags);
353 #endif
354         enable_irq(irq);
355 }
356
357 /* IRQ wakeup (PM) control: */
358 extern int irq_set_irq_wake(unsigned int irq, unsigned int on);
359
360 static inline int enable_irq_wake(unsigned int irq)
361 {
362         return irq_set_irq_wake(irq, 1);
363 }
364
365 static inline int disable_irq_wake(unsigned int irq)
366 {
367         return irq_set_irq_wake(irq, 0);
368 }
369
370 #else /* !CONFIG_GENERIC_HARDIRQS */
371 /*
372  * NOTE: non-genirq architectures, if they want to support the lock
373  * validator need to define the methods below in their asm/irq.h
374  * files, under an #ifdef CONFIG_LOCKDEP section.
375  */
376 #ifndef CONFIG_LOCKDEP
377 #  define disable_irq_nosync_lockdep(irq)       disable_irq_nosync(irq)
378 #  define disable_irq_nosync_lockdep_irqsave(irq, flags) \
379                                                 disable_irq_nosync(irq)
380 #  define disable_irq_lockdep(irq)              disable_irq(irq)
381 #  define enable_irq_lockdep(irq)               enable_irq(irq)
382 #  define enable_irq_lockdep_irqrestore(irq, flags) \
383                                                 enable_irq(irq)
384 # endif
385
386 static inline int enable_irq_wake(unsigned int irq)
387 {
388         return 0;
389 }
390
391 static inline int disable_irq_wake(unsigned int irq)
392 {
393         return 0;
394 }
395 #endif /* CONFIG_GENERIC_HARDIRQS */
396
397
398 #ifdef CONFIG_IRQ_FORCED_THREADING
399 extern bool force_irqthreads;
400 #else
401 #define force_irqthreads        (0)
402 #endif
403
404 #ifndef __ARCH_SET_SOFTIRQ_PENDING
405 #define set_softirq_pending(x) (local_softirq_pending() = (x))
406 #define or_softirq_pending(x)  (local_softirq_pending() |= (x))
407 #endif
408
409 /* Some architectures might implement lazy enabling/disabling of
410  * interrupts. In some cases, such as stop_machine, we might want
411  * to ensure that after a local_irq_disable(), interrupts have
412  * really been disabled in hardware. Such architectures need to
413  * implement the following hook.
414  */
415 #ifndef hard_irq_disable
416 #define hard_irq_disable()      do { } while(0)
417 #endif
418
419 /* PLEASE, avoid to allocate new softirqs, if you need not _really_ high
420    frequency threaded job scheduling. For almost all the purposes
421    tasklets are more than enough. F.e. all serial device BHs et
422    al. should be converted to tasklets, not to softirqs.
423  */
424
425 enum
426 {
427         HI_SOFTIRQ=0,
428         TIMER_SOFTIRQ,
429         NET_TX_SOFTIRQ,
430         NET_RX_SOFTIRQ,
431         BLOCK_SOFTIRQ,
432         BLOCK_IOPOLL_SOFTIRQ,
433         TASKLET_SOFTIRQ,
434         SCHED_SOFTIRQ,
435         HRTIMER_SOFTIRQ,
436         RCU_SOFTIRQ,    /* Preferable RCU should always be the last softirq */
437
438         NR_SOFTIRQS
439 };
440
441 /* map softirq index to softirq name. update 'softirq_to_name' in
442  * kernel/softirq.c when adding a new softirq.
443  */
444 extern char *softirq_to_name[NR_SOFTIRQS];
445
446 /* softirq mask and active fields moved to irq_cpustat_t in
447  * asm/hardirq.h to get better cache usage.  KAO
448  */
449
450 struct softirq_action
451 {
452         void    (*action)(struct softirq_action *);
453 };
454
455 asmlinkage void do_softirq(void);
456 asmlinkage void __do_softirq(void);
457 extern void open_softirq(int nr, void (*action)(struct softirq_action *));
458 extern void softirq_init(void);
459 static inline void __raise_softirq_irqoff(unsigned int nr)
460 {
461         trace_softirq_raise(nr);
462         or_softirq_pending(1UL << nr);
463 }
464
465 extern void raise_softirq_irqoff(unsigned int nr);
466 extern void raise_softirq(unsigned int nr);
467
468 /* This is the worklist that queues up per-cpu softirq work.
469  *
470  * send_remote_sendirq() adds work to these lists, and
471  * the softirq handler itself dequeues from them.  The queues
472  * are protected by disabling local cpu interrupts and they must
473  * only be accessed by the local cpu that they are for.
474  */
475 DECLARE_PER_CPU(struct list_head [NR_SOFTIRQS], softirq_work_list);
476
477 DECLARE_PER_CPU(struct task_struct *, ksoftirqd);
478
479 static inline struct task_struct *this_cpu_ksoftirqd(void)
480 {
481         return this_cpu_read(ksoftirqd);
482 }
483
484 /* Try to send a softirq to a remote cpu.  If this cannot be done, the
485  * work will be queued to the local cpu.
486  */
487 extern void send_remote_softirq(struct call_single_data *cp, int cpu, int softirq);
488
489 /* Like send_remote_softirq(), but the caller must disable local cpu interrupts
490  * and compute the current cpu, passed in as 'this_cpu'.
491  */
492 extern void __send_remote_softirq(struct call_single_data *cp, int cpu,
493                                   int this_cpu, int softirq);
494
495 /* Tasklets --- multithreaded analogue of BHs.
496
497    Main feature differing them of generic softirqs: tasklet
498    is running only on one CPU simultaneously.
499
500    Main feature differing them of BHs: different tasklets
501    may be run simultaneously on different CPUs.
502
503    Properties:
504    * If tasklet_schedule() is called, then tasklet is guaranteed
505      to be executed on some cpu at least once after this.
506    * If the tasklet is already scheduled, but its execution is still not
507      started, it will be executed only once.
508    * If this tasklet is already running on another CPU (or schedule is called
509      from tasklet itself), it is rescheduled for later.
510    * Tasklet is strictly serialized wrt itself, but not
511      wrt another tasklets. If client needs some intertask synchronization,
512      he makes it with spinlocks.
513  */
514
515 struct tasklet_struct
516 {
517         struct tasklet_struct *next;
518         unsigned long state;
519         atomic_t count;
520         void (*func)(unsigned long);
521         unsigned long data;
522 };
523
524 #define DECLARE_TASKLET(name, func, data) \
525 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data }
526
527 #define DECLARE_TASKLET_DISABLED(name, func, data) \
528 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data }
529
530
531 enum
532 {
533         TASKLET_STATE_SCHED,    /* Tasklet is scheduled for execution */
534         TASKLET_STATE_RUN       /* Tasklet is running (SMP only) */
535 };
536
537 #ifdef CONFIG_SMP
538 static inline int tasklet_trylock(struct tasklet_struct *t)
539 {
540         return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state);
541 }
542
543 static inline void tasklet_unlock(struct tasklet_struct *t)
544 {
545         smp_mb__before_clear_bit(); 
546         clear_bit(TASKLET_STATE_RUN, &(t)->state);
547 }
548
549 static inline void tasklet_unlock_wait(struct tasklet_struct *t)
550 {
551         while (test_bit(TASKLET_STATE_RUN, &(t)->state)) { barrier(); }
552 }
553 #else
554 #define tasklet_trylock(t) 1
555 #define tasklet_unlock_wait(t) do { } while (0)
556 #define tasklet_unlock(t) do { } while (0)
557 #endif
558
559 extern void __tasklet_schedule(struct tasklet_struct *t);
560
561 static inline void tasklet_schedule(struct tasklet_struct *t)
562 {
563         if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
564                 __tasklet_schedule(t);
565 }
566
567 extern void __tasklet_hi_schedule(struct tasklet_struct *t);
568
569 static inline void tasklet_hi_schedule(struct tasklet_struct *t)
570 {
571         if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
572                 __tasklet_hi_schedule(t);
573 }
574
575 extern void __tasklet_hi_schedule_first(struct tasklet_struct *t);
576
577 /*
578  * This version avoids touching any other tasklets. Needed for kmemcheck
579  * in order not to take any page faults while enqueueing this tasklet;
580  * consider VERY carefully whether you really need this or
581  * tasklet_hi_schedule()...
582  */
583 static inline void tasklet_hi_schedule_first(struct tasklet_struct *t)
584 {
585         if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
586                 __tasklet_hi_schedule_first(t);
587 }
588
589
590 static inline void tasklet_disable_nosync(struct tasklet_struct *t)
591 {
592         atomic_inc(&t->count);
593         smp_mb__after_atomic_inc();
594 }
595
596 static inline void tasklet_disable(struct tasklet_struct *t)
597 {
598         tasklet_disable_nosync(t);
599         tasklet_unlock_wait(t);
600         smp_mb();
601 }
602
603 static inline void tasklet_enable(struct tasklet_struct *t)
604 {
605         smp_mb__before_atomic_dec();
606         atomic_dec(&t->count);
607 }
608
609 static inline void tasklet_hi_enable(struct tasklet_struct *t)
610 {
611         smp_mb__before_atomic_dec();
612         atomic_dec(&t->count);
613 }
614
615 extern void tasklet_kill(struct tasklet_struct *t);
616 extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu);
617 extern void tasklet_init(struct tasklet_struct *t,
618                          void (*func)(unsigned long), unsigned long data);
619
620 struct tasklet_hrtimer {
621         struct hrtimer          timer;
622         struct tasklet_struct   tasklet;
623         enum hrtimer_restart    (*function)(struct hrtimer *);
624 };
625
626 extern void
627 tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer,
628                      enum hrtimer_restart (*function)(struct hrtimer *),
629                      clockid_t which_clock, enum hrtimer_mode mode);
630
631 static inline
632 int tasklet_hrtimer_start(struct tasklet_hrtimer *ttimer, ktime_t time,
633                           const enum hrtimer_mode mode)
634 {
635         return hrtimer_start(&ttimer->timer, time, mode);
636 }
637
638 static inline
639 void tasklet_hrtimer_cancel(struct tasklet_hrtimer *ttimer)
640 {
641         hrtimer_cancel(&ttimer->timer);
642         tasklet_kill(&ttimer->tasklet);
643 }
644
645 /*
646  * Autoprobing for irqs:
647  *
648  * probe_irq_on() and probe_irq_off() provide robust primitives
649  * for accurate IRQ probing during kernel initialization.  They are
650  * reasonably simple to use, are not "fooled" by spurious interrupts,
651  * and, unlike other attempts at IRQ probing, they do not get hung on
652  * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards).
653  *
654  * For reasonably foolproof probing, use them as follows:
655  *
656  * 1. clear and/or mask the device's internal interrupt.
657  * 2. sti();
658  * 3. irqs = probe_irq_on();      // "take over" all unassigned idle IRQs
659  * 4. enable the device and cause it to trigger an interrupt.
660  * 5. wait for the device to interrupt, using non-intrusive polling or a delay.
661  * 6. irq = probe_irq_off(irqs);  // get IRQ number, 0=none, negative=multiple
662  * 7. service the device to clear its pending interrupt.
663  * 8. loop again if paranoia is required.
664  *
665  * probe_irq_on() returns a mask of allocated irq's.
666  *
667  * probe_irq_off() takes the mask as a parameter,
668  * and returns the irq number which occurred,
669  * or zero if none occurred, or a negative irq number
670  * if more than one irq occurred.
671  */
672
673 #if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE) 
674 static inline unsigned long probe_irq_on(void)
675 {
676         return 0;
677 }
678 static inline int probe_irq_off(unsigned long val)
679 {
680         return 0;
681 }
682 static inline unsigned int probe_irq_mask(unsigned long val)
683 {
684         return 0;
685 }
686 #else
687 extern unsigned long probe_irq_on(void);        /* returns 0 on failure */
688 extern int probe_irq_off(unsigned long);        /* returns 0 or negative on failure */
689 extern unsigned int probe_irq_mask(unsigned long);      /* returns mask of ISA interrupts */
690 #endif
691
692 #ifdef CONFIG_PROC_FS
693 /* Initialize /proc/irq/ */
694 extern void init_irq_proc(void);
695 #else
696 static inline void init_irq_proc(void)
697 {
698 }
699 #endif
700
701 struct seq_file;
702 int show_interrupts(struct seq_file *p, void *v);
703 int arch_show_interrupts(struct seq_file *p, int prec);
704
705 extern int early_irq_init(void);
706 extern int arch_probe_nr_irqs(void);
707 extern int arch_early_irq_init(void);
708
709 #endif