drivers/video/pxafb.c

   1 /*
   2  *  linux/drivers/video/pxafb.c
   3  *
   4  *  Copyright (C) 1999 Eric A. Thomas.
   5  *  Copyright (C) 2004 Jean-Frederic Clere.
   6  *  Copyright (C) 2004 Ian Campbell.
   7  *  Copyright (C) 2004 Jeff Lackey.
   8  *   Based on sa1100fb.c Copyright (C) 1999 Eric A. Thomas
   9  *  which in turn is
  10  *   Based on acornfb.c Copyright (C) Russell King.
  11  *
  12  * This file is subject to the terms and conditions of the GNU General Public
  13  * License.  See the file COPYING in the main directory of this archive for
  14  * more details.
  15  *
  16  *              Intel PXA250/210 LCD Controller Frame Buffer Driver
  17  *
  18  * Please direct your questions and comments on this driver to the following
  19  * email address:
  20  *
  21  *      linux-arm-kernel@lists.arm.linux.org.uk
  22  *
  23  * Add support for overlay1 and overlay2 based on pxafb_overlay.c:
  24  *
  25  *   Copyright (C) 2004, Intel Corporation
  26  *
  27  *     2003/08/27: <yu.tang@intel.com>
  28  *     2004/03/10: <stanley.cai@intel.com>
  29  *     2004/10/28: <yan.yin@intel.com>
  30  *
  31  *   Copyright (C) 2006-2008 Marvell International Ltd.
  32  *   All Rights Reserved
  33  */
  34
  35 #include <linux/module.h>
  36 #include <linux/moduleparam.h>
  37 #include <linux/kernel.h>
  38 #include <linux/sched.h>
  39 #include <linux/errno.h>
  40 #include <linux/string.h>
  41 #include <linux/interrupt.h>
  42 #include <linux/slab.h>
  43 #include <linux/mm.h>
  44 #include <linux/fb.h>
  45 #include <linux/delay.h>
  46 #include <linux/init.h>
  47 #include <linux/ioport.h>
  48 #include <linux/cpufreq.h>
  49 #include <linux/platform_device.h>
  50 #include <linux/dma-mapping.h>
  51 #include <linux/clk.h>
  52 #include <linux/err.h>
  53 #include <linux/completion.h>
  54 #include <linux/mutex.h>
  55 #include <linux/kthread.h>
  56 #include <linux/freezer.h>
  57
  58 #include <mach/hardware.h>
  59 #include <asm/io.h>
  60 #include <asm/irq.h>
  61 #include <asm/div64.h>
  62 #include <mach/bitfield.h>
  63 #include <mach/pxafb.h>
  64
  65 /*
  66  * Complain if VAR is out of range.
  67  */
  68 #define DEBUG_VAR 1
  69
  70 #include "pxafb.h"
  71
  72 /* Bits which should not be set in machine configuration structures */
  73 #define LCCR0_INVALID_CONFIG_MASK       (LCCR0_OUM | LCCR0_BM | LCCR0_QDM |\
  74                                          LCCR0_DIS | LCCR0_EFM | LCCR0_IUM |\
  75                                          LCCR0_SFM | LCCR0_LDM | LCCR0_ENB)
  76
  77 #define LCCR3_INVALID_CONFIG_MASK       (LCCR3_HSP | LCCR3_VSP |\
  78                                          LCCR3_PCD | LCCR3_BPP(0xf))
  79
  80 static int pxafb_activate_var(struct fb_var_screeninfo *var,
  81                                 struct pxafb_info *);
  82 static void set_ctrlr_state(struct pxafb_info *fbi, u_int state);
  83 static void setup_base_frame(struct pxafb_info *fbi,
  84                              struct fb_var_screeninfo *var, int branch);
  85 static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal,
  86                            unsigned long offset, size_t size);
  87
  88 static unsigned long video_mem_size = 0;
  89
  90 static inline unsigned long
  91 lcd_readl(struct pxafb_info *fbi, unsigned int off)
  92 {
  93         return __raw_readl(fbi->mmio_base + off);
  94 }
  95
  96 static inline void
  97 lcd_writel(struct pxafb_info *fbi, unsigned int off, unsigned long val)
  98 {
  99         __raw_writel(val, fbi->mmio_base + off);
 100 }
 101
 102 static inline void pxafb_schedule_work(struct pxafb_info *fbi, u_int state)
 103 {
 104         unsigned long flags;
 105
 106         local_irq_save(flags);
 107         /*
 108          * We need to handle two requests being made at the same time.
 109          * There are two important cases:
 110          *  1. When we are changing VT (C_REENABLE) while unblanking
 111          *     (C_ENABLE) We must perform the unblanking, which will
 112          *     do our REENABLE for us.
 113          *  2. When we are blanking, but immediately unblank before
 114          *     we have blanked.  We do the "REENABLE" thing here as
 115          *     well, just to be sure.
 116          */
 117         if (fbi->task_state == C_ENABLE && state == C_REENABLE)
 118                 state = (u_int) -1;
 119         if (fbi->task_state == C_DISABLE && state == C_ENABLE)
 120                 state = C_REENABLE;
 121
 122         if (state != (u_int)-1) {
 123                 fbi->task_state = state;
 124                 schedule_work(&fbi->task);
 125         }
 126         local_irq_restore(flags);
 127 }
 128
 129 static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf)
 130 {
 131         chan &= 0xffff;
 132         chan >>= 16 - bf->length;
 133         return chan << bf->offset;
 134 }
 135
 136 static int
 137 pxafb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue,
 138                        u_int trans, struct fb_info *info)
 139 {
 140         struct pxafb_info *fbi = (struct pxafb_info *)info;
 141         u_int val;
 142
 143         if (regno >= fbi->palette_size)
 144                 return 1;
 145
 146         if (fbi->fb.var.grayscale) {
 147                 fbi->palette_cpu[regno] = ((blue >> 8) & 0x00ff);
 148                 return 0;
 149         }
 150
 151         switch (fbi->lccr4 & LCCR4_PAL_FOR_MASK) {
 152         case LCCR4_PAL_FOR_0:
 153                 val  = ((red   >>  0) & 0xf800);
 154                 val |= ((green >>  5) & 0x07e0);
 155                 val |= ((blue  >> 11) & 0x001f);
 156                 fbi->palette_cpu[regno] = val;
 157                 break;
 158         case LCCR4_PAL_FOR_1:
 159                 val  = ((red   << 8) & 0x00f80000);
 160                 val |= ((green >> 0) & 0x0000fc00);
 161                 val |= ((blue  >> 8) & 0x000000f8);
 162                 ((u32 *)(fbi->palette_cpu))[regno] = val;
 163                 break;
 164         case LCCR4_PAL_FOR_2:
 165                 val  = ((red   << 8) & 0x00fc0000);
 166                 val |= ((green >> 0) & 0x0000fc00);
 167                 val |= ((blue  >> 8) & 0x000000fc);
 168                 ((u32 *)(fbi->palette_cpu))[regno] = val;
 169                 break;
 170         case LCCR4_PAL_FOR_3:
 171                 val  = ((red   << 8) & 0x00ff0000);
 172                 val |= ((green >> 0) & 0x0000ff00);
 173                 val |= ((blue  >> 8) & 0x000000ff);
 174                 ((u32 *)(fbi->palette_cpu))[regno] = val;
 175                 break;
 176         }
 177
 178         return 0;
 179 }
 180
 181 static int
 182 pxafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 183                    u_int trans, struct fb_info *info)
 184 {
 185         struct pxafb_info *fbi = (struct pxafb_info *)info;
 186         unsigned int val;
 187         int ret = 1;
 188
 189         /*
 190          * If inverse mode was selected, invert all the colours
 191          * rather than the register number.  The register number
 192          * is what you poke into the framebuffer to produce the
 193          * colour you requested.
 194          */
 195         if (fbi->cmap_inverse) {
 196                 red   = 0xffff - red;
 197                 green = 0xffff - green;
 198                 blue  = 0xffff - blue;
 199         }
 200
 201         /*
 202          * If greyscale is true, then we convert the RGB value
 203          * to greyscale no matter what visual we are using.
 204          */
 205         if (fbi->fb.var.grayscale)
 206                 red = green = blue = (19595 * red + 38470 * green +
 207                                         7471 * blue) >> 16;
 208
 209         switch (fbi->fb.fix.visual) {
 210         case FB_VISUAL_TRUECOLOR:
 211                 /*
 212                  * 16-bit True Colour.  We encode the RGB value
 213                  * according to the RGB bitfield information.
 214                  */
 215                 if (regno < 16) {
 216                         u32 *pal = fbi->fb.pseudo_palette;
 217
 218                         val  = chan_to_field(red, &fbi->fb.var.red);
 219                         val |= chan_to_field(green, &fbi->fb.var.green);
 220                         val |= chan_to_field(blue, &fbi->fb.var.blue);
 221
 222                         pal[regno] = val;
 223                         ret = 0;
 224                 }
 225                 break;
 226
 227         case FB_VISUAL_STATIC_PSEUDOCOLOR:
 228         case FB_VISUAL_PSEUDOCOLOR:
 229                 ret = pxafb_setpalettereg(regno, red, green, blue, trans, info);
 230                 break;
 231         }
 232
 233         return ret;
 234 }
 235
 236 /* calculate pixel depth, transparency bit included, >=16bpp formats _only_ */
 237 static inline int var_to_depth(struct fb_var_screeninfo *var)
 238 {
 239         return var->red.length + var->green.length +
 240                 var->blue.length + var->transp.length;
 241 }
 242
 243 /* calculate 4-bit BPP value for LCCR3 and OVLxC1 */
 244 static int pxafb_var_to_bpp(struct fb_var_screeninfo *var)
 245 {
 246         int bpp = -EINVAL;
 247
 248         switch (var->bits_per_pixel) {
 249         case 1:  bpp = 0; break;
 250         case 2:  bpp = 1; break;
 251         case 4:  bpp = 2; break;
 252         case 8:  bpp = 3; break;
 253         case 16: bpp = 4; break;
 254         case 24:
 255                 switch (var_to_depth(var)) {
 256                 case 18: bpp = 6; break; /* 18-bits/pixel packed */
 257                 case 19: bpp = 8; break; /* 19-bits/pixel packed */
 258                 case 24: bpp = 9; break;
 259                 }
 260                 break;
 261         case 32:
 262                 switch (var_to_depth(var)) {
 263                 case 18: bpp = 5; break; /* 18-bits/pixel unpacked */
 264                 case 19: bpp = 7; break; /* 19-bits/pixel unpacked */
 265                 case 25: bpp = 10; break;
 266                 }
 267                 break;
 268         }
 269         return bpp;
 270 }
 271
 272 /*
 273  *  pxafb_var_to_lccr3():
 274  *    Convert a bits per pixel value to the correct bit pattern for LCCR3
 275  *
 276  *  NOTE: for PXA27x with overlays support, the LCCR3_PDFOR_x bits have an
 277  *  implication of the acutal use of transparency bit,  which we handle it
 278  *  here separatedly. See PXA27x Developer's Manual, Section <<7.4.6 Pixel
 279  *  Formats>> for the valid combination of PDFOR, PAL_FOR for various BPP.
 280  *
 281  *  Transparency for palette pixel formats is not supported at the moment.
 282  */
 283 static uint32_t pxafb_var_to_lccr3(struct fb_var_screeninfo *var)
 284 {
 285         int bpp = pxafb_var_to_bpp(var);
 286         uint32_t lccr3;
 287
 288         if (bpp < 0)
 289                 return 0;
 290
 291         lccr3 = LCCR3_BPP(bpp);
 292
 293         switch (var_to_depth(var)) {
 294         case 16: lccr3 |= var->transp.length ? LCCR3_PDFOR_3 : 0; break;
 295         case 18: lccr3 |= LCCR3_PDFOR_3; break;
 296         case 24: lccr3 |= var->transp.length ? LCCR3_PDFOR_2 : LCCR3_PDFOR_3;
 297                  break;
 298         case 19:
 299         case 25: lccr3 |= LCCR3_PDFOR_0; break;
 300         }
 301         return lccr3;
 302 }
 303
 304 #define SET_PIXFMT(v, r, g, b, t)                               \
 305 ({                                                              \
 306         (v)->transp.offset = (t) ? (r) + (g) + (b) : 0;         \
 307         (v)->transp.length = (t) ? (t) : 0;                     \
 308         (v)->blue.length   = (b); (v)->blue.offset = 0;         \
 309         (v)->green.length  = (g); (v)->green.offset = (b);      \
 310         (v)->red.length    = (r); (v)->red.offset = (b) + (g);  \
 311 })
 312
 313 /* set the RGBT bitfields of fb_var_screeninf according to
 314  * var->bits_per_pixel and given depth
 315  */
 316 static void pxafb_set_pixfmt(struct fb_var_screeninfo *var, int depth)
 317 {
 318         if (depth == 0)
 319                 depth = var->bits_per_pixel;
 320
 321         if (var->bits_per_pixel < 16) {
 322                 /* indexed pixel formats */
 323                 var->red.offset    = 0; var->red.length    = 8;
 324                 var->green.offset  = 0; var->green.length  = 8;
 325                 var->blue.offset   = 0; var->blue.length   = 8;
 326                 var->transp.offset = 0; var->transp.length = 8;
 327         }
 328
 329         switch (depth) {
 330         case 16: var->transp.length ?
 331                  SET_PIXFMT(var, 5, 5, 5, 1) :          /* RGBT555 */
 332                  SET_PIXFMT(var, 5, 6, 5, 0); break;    /* RGB565 */
 333         case 18: SET_PIXFMT(var, 6, 6, 6, 0); break;    /* RGB666 */
 334         case 19: SET_PIXFMT(var, 6, 6, 6, 1); break;    /* RGBT666 */
 335         case 24: var->transp.length ?
 336                  SET_PIXFMT(var, 8, 8, 7, 1) :          /* RGBT887 */
 337                  SET_PIXFMT(var, 8, 8, 8, 0); break;    /* RGB888 */
 338         case 25: SET_PIXFMT(var, 8, 8, 8, 1); break;    /* RGBT888 */
 339         }
 340 }
 341
 342 #ifdef CONFIG_CPU_FREQ
 343 /*
 344  *  pxafb_display_dma_period()
 345  *    Calculate the minimum period (in picoseconds) between two DMA
 346  *    requests for the LCD controller.  If we hit this, it means we're
 347  *    doing nothing but LCD DMA.
 348  */
 349 static unsigned int pxafb_display_dma_period(struct fb_var_screeninfo *var)
 350 {
 351         /*
 352          * Period = pixclock * bits_per_byte * bytes_per_transfer
 353          *              / memory_bits_per_pixel;
 354          */
 355         return var->pixclock * 8 * 16 / var->bits_per_pixel;
 356 }
 357 #endif
 358
 359 /*
 360  * Select the smallest mode that allows the desired resolution to be
 361  * displayed. If desired parameters can be rounded up.
 362  */
 363 static struct pxafb_mode_info *pxafb_getmode(struct pxafb_mach_info *mach,
 364                                              struct fb_var_screeninfo *var)
 365 {
 366         struct pxafb_mode_info *mode = NULL;
 367         struct pxafb_mode_info *modelist = mach->modes;
 368         unsigned int best_x = 0xffffffff, best_y = 0xffffffff;
 369         unsigned int i;
 370
 371         for (i = 0; i < mach->num_modes; i++) {
 372                 if (modelist[i].xres >= var->xres &&
 373                     modelist[i].yres >= var->yres &&
 374                     modelist[i].xres < best_x &&
 375                     modelist[i].yres < best_y &&
 376                     modelist[i].bpp >= var->bits_per_pixel) {
 377                         best_x = modelist[i].xres;
 378                         best_y = modelist[i].yres;
 379                         mode = &modelist[i];
 380                 }
 381         }
 382
 383         return mode;
 384 }
 385
 386 static void pxafb_setmode(struct fb_var_screeninfo *var,
 387                           struct pxafb_mode_info *mode)
 388 {
 389         var->xres               = mode->xres;
 390         var->yres               = mode->yres;
 391         var->bits_per_pixel     = mode->bpp;
 392         var->pixclock           = mode->pixclock;
 393         var->hsync_len          = mode->hsync_len;
 394         var->left_margin        = mode->left_margin;
 395         var->right_margin       = mode->right_margin;
 396         var->vsync_len          = mode->vsync_len;
 397         var->upper_margin       = mode->upper_margin;
 398         var->lower_margin       = mode->lower_margin;
 399         var->sync               = mode->sync;
 400         var->grayscale          = mode->cmap_greyscale;
 401         var->transp.length      = mode->transparency;
 402
 403         /* set the initial RGBA bitfields */
 404         pxafb_set_pixfmt(var, mode->depth);
 405 }
 406
 407 static int pxafb_adjust_timing(struct pxafb_info *fbi,
 408                                struct fb_var_screeninfo *var)
 409 {
 410         int line_length;
 411
 412         var->xres = max_t(int, var->xres, MIN_XRES);
 413         var->yres = max_t(int, var->yres, MIN_YRES);
 414
 415         if (!(fbi->lccr0 & LCCR0_LCDT)) {
 416                 clamp_val(var->hsync_len, 1, 64);
 417                 clamp_val(var->vsync_len, 1, 64);
 418                 clamp_val(var->left_margin,  1, 255);
 419                 clamp_val(var->right_margin, 1, 255);
 420                 clamp_val(var->upper_margin, 1, 255);
 421                 clamp_val(var->lower_margin, 1, 255);
 422         }
 423
 424         /* make sure each line is aligned on word boundary */
 425         line_length = var->xres * var->bits_per_pixel / 8;
 426         line_length = ALIGN(line_length, 4);
 427         var->xres = line_length * 8 / var->bits_per_pixel;
 428
 429         /* we don't support xpan, force xres_virtual to be equal to xres */
 430         var->xres_virtual = var->xres;
 431
 432         if (var->accel_flags & FB_ACCELF_TEXT)
 433                 var->yres_virtual = fbi->fb.fix.smem_len / line_length;
 434         else
 435                 var->yres_virtual = max(var->yres_virtual, var->yres);
 436
 437         /* check for limits */
 438         if (var->xres > MAX_XRES || var->yres > MAX_YRES)
 439                 return -EINVAL;
 440
 441         if (var->yres > var->yres_virtual)
 442                 return -EINVAL;
 443
 444         return 0;
 445 }
 446
 447 /*
 448  *  pxafb_check_var():
 449  *    Get the video params out of 'var'. If a value doesn't fit, round it up,
 450  *    if it's too big, return -EINVAL.
 451  *
 452  *    Round up in the following order: bits_per_pixel, xres,
 453  *    yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale,
 454  *    bitfields, horizontal timing, vertical timing.
 455  */
 456 static int pxafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 457 {
 458         struct pxafb_info *fbi = (struct pxafb_info *)info;
 459         struct pxafb_mach_info *inf = fbi->dev->platform_data;
 460         int err;
 461
 462         if (inf->fixed_modes) {
 463                 struct pxafb_mode_info *mode;
 464
 465                 mode = pxafb_getmode(inf, var);
 466                 if (!mode)
 467                         return -EINVAL;
 468                 pxafb_setmode(var, mode);
 469         }
 470
 471         /* do a test conversion to BPP fields to check the color formats */
 472         err = pxafb_var_to_bpp(var);
 473         if (err < 0)
 474                 return err;
 475
 476         pxafb_set_pixfmt(var, var_to_depth(var));
 477
 478         err = pxafb_adjust_timing(fbi, var);
 479         if (err)
 480                 return err;
 481
 482 #ifdef CONFIG_CPU_FREQ
 483         pr_debug("pxafb: dma period = %d ps\n",
 484                  pxafb_display_dma_period(var));
 485 #endif
 486
 487         return 0;
 488 }
 489
 490 /*
 491  * pxafb_set_par():
 492  *      Set the user defined part of the display for the specified console
 493  */
 494 static int pxafb_set_par(struct fb_info *info)
 495 {
 496         struct pxafb_info *fbi = (struct pxafb_info *)info;
 497         struct fb_var_screeninfo *var = &info->var;
 498
 499         if (var->bits_per_pixel >= 16)
 500                 fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR;
 501         else if (!fbi->cmap_static)
 502                 fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
 503         else {
 504                 /*
 505                  * Some people have weird ideas about wanting static
 506                  * pseudocolor maps.  I suspect their user space
 507                  * applications are broken.
 508                  */
 509                 fbi->fb.fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR;
 510         }
 511
 512         fbi->fb.fix.line_length = var->xres_virtual *
 513                                   var->bits_per_pixel / 8;
 514         if (var->bits_per_pixel >= 16)
 515                 fbi->palette_size = 0;
 516         else
 517                 fbi->palette_size = var->bits_per_pixel == 1 ?
 518                                         4 : 1 << var->bits_per_pixel;
 519
 520         fbi->palette_cpu = (u16 *)&fbi->dma_buff->palette[0];
 521
 522         if (fbi->fb.var.bits_per_pixel >= 16)
 523                 fb_dealloc_cmap(&fbi->fb.cmap);
 524         else
 525                 fb_alloc_cmap(&fbi->fb.cmap, 1<<fbi->fb.var.bits_per_pixel, 0);
 526
 527         pxafb_activate_var(var, fbi);
 528
 529         return 0;
 530 }
 531
 532 static int pxafb_pan_display(struct fb_var_screeninfo *var,
 533                              struct fb_info *info)
 534 {
 535         struct pxafb_info *fbi = (struct pxafb_info *)info;
 536         struct fb_var_screeninfo newvar;
 537         int dma = DMA_MAX + DMA_BASE;
 538
 539         if (fbi->state != C_ENABLE)
 540                 return 0;
 541
 542         /* Only take .xoffset, .yoffset and .vmode & FB_VMODE_YWRAP from what
 543          * was passed in and copy the rest from the old screeninfo.
 544          */
 545         memcpy(&newvar, &fbi->fb.var, sizeof(newvar));
 546         newvar.xoffset = var->xoffset;
 547         newvar.yoffset = var->yoffset;
 548         newvar.vmode &= ~FB_VMODE_YWRAP;
 549         newvar.vmode |= var->vmode & FB_VMODE_YWRAP;
 550
 551         setup_base_frame(fbi, &newvar, 1);
 552
 553         if (fbi->lccr0 & LCCR0_SDS)
 554                 lcd_writel(fbi, FBR1, fbi->fdadr[dma + 1] | 0x1);
 555
 556         lcd_writel(fbi, FBR0, fbi->fdadr[dma] | 0x1);
 557         return 0;
 558 }
 559
 560 /*
 561  * pxafb_blank():
 562  *      Blank the display by setting all palette values to zero.  Note, the
 563  *      16 bpp mode does not really use the palette, so this will not
 564  *      blank the display in all modes.
 565  */
 566 static int pxafb_blank(int blank, struct fb_info *info)
 567 {
 568         struct pxafb_info *fbi = (struct pxafb_info *)info;
 569         int i;
 570
 571         switch (blank) {
 572         case FB_BLANK_POWERDOWN:
 573         case FB_BLANK_VSYNC_SUSPEND:
 574         case FB_BLANK_HSYNC_SUSPEND:
 575         case FB_BLANK_NORMAL:
 576                 if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR ||
 577                     fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
 578                         for (i = 0; i < fbi->palette_size; i++)
 579                                 pxafb_setpalettereg(i, 0, 0, 0, 0, info);
 580
 581                 pxafb_schedule_work(fbi, C_DISABLE);
 582                 /* TODO if (pxafb_blank_helper) pxafb_blank_helper(blank); */
 583                 break;
 584
 585         case FB_BLANK_UNBLANK:
 586                 /* TODO if (pxafb_blank_helper) pxafb_blank_helper(blank); */
 587                 if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR ||
 588                     fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
 589                         fb_set_cmap(&fbi->fb.cmap, info);
 590                 pxafb_schedule_work(fbi, C_ENABLE);
 591         }
 592         return 0;
 593 }
 594
 595 static struct fb_ops pxafb_ops = {
 596         .owner          = THIS_MODULE,
 597         .fb_check_var   = pxafb_check_var,
 598         .fb_set_par     = pxafb_set_par,
 599         .fb_pan_display = pxafb_pan_display,
 600         .fb_setcolreg   = pxafb_setcolreg,
 601         .fb_fillrect    = cfb_fillrect,
 602         .fb_copyarea    = cfb_copyarea,
 603         .fb_imageblit   = cfb_imageblit,
 604         .fb_blank       = pxafb_blank,
 605 };
 606
 607 #ifdef CONFIG_FB_PXA_OVERLAY
 608 static void overlay1fb_setup(struct pxafb_layer *ofb)
 609 {
 610         int size = ofb->fb.fix.line_length * ofb->fb.var.yres_virtual;
 611         unsigned long start = ofb->video_mem_phys;
 612         setup_frame_dma(ofb->fbi, DMA_OV1, PAL_NONE, start, size);
 613 }
 614
 615 /* Depending on the enable status of overlay1/2, the DMA should be
 616  * updated from FDADRx (when disabled) or FBRx (when enabled).
 617  */
 618 static void overlay1fb_enable(struct pxafb_layer *ofb)
 619 {
 620         int enabled = lcd_readl(ofb->fbi, OVL1C1) & OVLxC1_OEN;
 621         uint32_t fdadr1 = ofb->fbi->fdadr[DMA_OV1] | (enabled ? 0x1 : 0);
 622
 623         lcd_writel(ofb->fbi, enabled ? FBR1 : FDADR1, fdadr1);
 624         lcd_writel(ofb->fbi, OVL1C2, ofb->control[1]);
 625         lcd_writel(ofb->fbi, OVL1C1, ofb->control[0] | OVLxC1_OEN);
 626 }
 627
 628 static void overlay1fb_disable(struct pxafb_layer *ofb)
 629 {
 630         uint32_t lccr5;
 631
 632         if (!(lcd_readl(ofb->fbi, OVL1C1) & OVLxC1_OEN))
 633                 return;
 634
 635         lccr5 = lcd_readl(ofb->fbi, LCCR5);
 636
 637         lcd_writel(ofb->fbi, OVL1C1, ofb->control[0] & ~OVLxC1_OEN);
 638
 639         lcd_writel(ofb->fbi, LCSR1, LCSR1_BS(1));
 640         lcd_writel(ofb->fbi, LCCR5, lccr5 & ~LCSR1_BS(1));
 641         lcd_writel(ofb->fbi, FBR1, ofb->fbi->fdadr[DMA_OV1] | 0x3);
 642
 643         if (wait_for_completion_timeout(&ofb->branch_done, 1 * HZ) == 0)
 644                 pr_warning("%s: timeout disabling overlay1\n", __func__);
 645
 646         lcd_writel(ofb->fbi, LCCR5, lccr5);
 647 }
 648
 649 static void overlay2fb_setup(struct pxafb_layer *ofb)
 650 {
 651         int size, div = 1, pfor = NONSTD_TO_PFOR(ofb->fb.var.nonstd);
 652         unsigned long start[3] = { ofb->video_mem_phys, 0, 0 };
 653
 654         if (pfor == OVERLAY_FORMAT_RGB || pfor == OVERLAY_FORMAT_YUV444_PACKED) {
 655                 size = ofb->fb.fix.line_length * ofb->fb.var.yres_virtual;
 656                 setup_frame_dma(ofb->fbi, DMA_OV2_Y, -1, start[0], size);
 657         } else {
 658                 size = ofb->fb.var.xres_virtual * ofb->fb.var.yres_virtual;
 659                 switch (pfor) {
 660                 case OVERLAY_FORMAT_YUV444_PLANAR: div = 1; break;
 661                 case OVERLAY_FORMAT_YUV422_PLANAR: div = 2; break;
 662                 case OVERLAY_FORMAT_YUV420_PLANAR: div = 4; break;
 663                 }
 664                 start[1] = start[0] + size;
 665                 start[2] = start[1] + size / div;
 666                 setup_frame_dma(ofb->fbi, DMA_OV2_Y,  -1, start[0], size);
 667                 setup_frame_dma(ofb->fbi, DMA_OV2_Cb, -1, start[1], size / div);
 668                 setup_frame_dma(ofb->fbi, DMA_OV2_Cr, -1, start[2], size / div);
 669         }
 670 }
 671
 672 static void overlay2fb_enable(struct pxafb_layer *ofb)
 673 {
 674         int pfor = NONSTD_TO_PFOR(ofb->fb.var.nonstd);
 675         int enabled = lcd_readl(ofb->fbi, OVL2C1) & OVLxC1_OEN;
 676         uint32_t fdadr2 = ofb->fbi->fdadr[DMA_OV2_Y]  | (enabled ? 0x1 : 0);
 677         uint32_t fdadr3 = ofb->fbi->fdadr[DMA_OV2_Cb] | (enabled ? 0x1 : 0);
 678         uint32_t fdadr4 = ofb->fbi->fdadr[DMA_OV2_Cr] | (enabled ? 0x1 : 0);
 679
 680         if (pfor == OVERLAY_FORMAT_RGB || pfor == OVERLAY_FORMAT_YUV444_PACKED)
 681                 lcd_writel(ofb->fbi, enabled ? FBR2 : FDADR2, fdadr2);
 682         else {
 683                 lcd_writel(ofb->fbi, enabled ? FBR2 : FDADR2, fdadr2);
 684                 lcd_writel(ofb->fbi, enabled ? FBR3 : FDADR3, fdadr3);
 685                 lcd_writel(ofb->fbi, enabled ? FBR4 : FDADR4, fdadr4);
 686         }
 687         lcd_writel(ofb->fbi, OVL2C2, ofb->control[1]);
 688         lcd_writel(ofb->fbi, OVL2C1, ofb->control[0] | OVLxC1_OEN);
 689 }
 690
 691 static void overlay2fb_disable(struct pxafb_layer *ofb)
 692 {
 693         uint32_t lccr5;
 694
 695         if (!(lcd_readl(ofb->fbi, OVL2C1) & OVLxC1_OEN))
 696                 return;
 697
 698         lccr5 = lcd_readl(ofb->fbi, LCCR5);
 699
 700         lcd_writel(ofb->fbi, OVL2C1, ofb->control[0] & ~OVLxC1_OEN);
 701
 702         lcd_writel(ofb->fbi, LCSR1, LCSR1_BS(2));
 703         lcd_writel(ofb->fbi, LCCR5, lccr5 & ~LCSR1_BS(2));
 704         lcd_writel(ofb->fbi, FBR2, ofb->fbi->fdadr[DMA_OV2_Y]  | 0x3);
 705         lcd_writel(ofb->fbi, FBR3, ofb->fbi->fdadr[DMA_OV2_Cb] | 0x3);
 706         lcd_writel(ofb->fbi, FBR4, ofb->fbi->fdadr[DMA_OV2_Cr] | 0x3);
 707
 708         if (wait_for_completion_timeout(&ofb->branch_done, 1 * HZ) == 0)
 709                 pr_warning("%s: timeout disabling overlay2\n", __func__);
 710 }
 711
 712 static struct pxafb_layer_ops ofb_ops[] = {
 713         [0] = {
 714                 .enable         = overlay1fb_enable,
 715                 .disable        = overlay1fb_disable,
 716                 .setup          = overlay1fb_setup,
 717         },
 718         [1] = {
 719                 .enable         = overlay2fb_enable,
 720                 .disable        = overlay2fb_disable,
 721                 .setup          = overlay2fb_setup,
 722         },
 723 };
 724
 725 static int overlayfb_open(struct fb_info *info, int user)
 726 {
 727         struct pxafb_layer *ofb = (struct pxafb_layer *)info;
 728
 729         /* no support for framebuffer console on overlay */
 730         if (user == 0)
 731                 return -ENODEV;
 732
 733         if (ofb->usage++ == 0)
 734                 /* unblank the base framebuffer */
 735                 fb_blank(&ofb->fbi->fb, FB_BLANK_UNBLANK);
 736
 737         return 0;
 738 }
 739
 740 static int overlayfb_release(struct fb_info *info, int user)
 741 {
 742         struct pxafb_layer *ofb = (struct pxafb_layer*) info;
 743
 744         if (ofb->usage == 1) {
 745                 ofb->ops->disable(ofb);
 746                 ofb->fb.var.height      = -1;
 747                 ofb->fb.var.width       = -1;
 748                 ofb->fb.var.xres = ofb->fb.var.xres_virtual = 0;
 749                 ofb->fb.var.yres = ofb->fb.var.yres_virtual = 0;
 750
 751                 ofb->usage--;
 752         }
 753         return 0;
 754 }
 755
 756 static int overlayfb_check_var(struct fb_var_screeninfo *var,
 757                                struct fb_info *info)
 758 {
 759         struct pxafb_layer *ofb = (struct pxafb_layer *)info;
 760         struct fb_var_screeninfo *base_var = &ofb->fbi->fb.var;
 761         int xpos, ypos, pfor, bpp;
 762
 763         xpos = NONSTD_TO_XPOS(var->nonstd);
 764         ypos = NONSTD_TO_YPOS(var->nonstd);
 765         pfor = NONSTD_TO_PFOR(var->nonstd);
 766
 767         bpp = pxafb_var_to_bpp(var);
 768         if (bpp < 0)
 769                 return -EINVAL;
 770
 771         /* no support for YUV format on overlay1 */
 772         if (ofb->id == OVERLAY1 && pfor != 0)
 773                 return -EINVAL;
 774
 775         /* for YUV packed formats, bpp = 'minimum bpp of YUV components' */
 776         switch (pfor) {
 777         case OVERLAY_FORMAT_RGB:
 778                 bpp = pxafb_var_to_bpp(var);
 779                 if (bpp < 0)
 780                         return -EINVAL;
 781
 782                 pxafb_set_pixfmt(var, var_to_depth(var));
 783                 break;
 784         case OVERLAY_FORMAT_YUV444_PACKED: bpp = 24; break;
 785         case OVERLAY_FORMAT_YUV444_PLANAR: bpp = 8; break;
 786         case OVERLAY_FORMAT_YUV422_PLANAR: bpp = 4; break;
 787         case OVERLAY_FORMAT_YUV420_PLANAR: bpp = 2; break;
 788         default:
 789                 return -EINVAL;
 790         }
 791
 792         /* each line must start at a 32-bit word boundary */
 793         if ((xpos * bpp) % 32)
 794                 return -EINVAL;
 795
 796         /* xres must align on 32-bit word boundary */
 797         var->xres = roundup(var->xres * bpp, 32) / bpp;
 798
 799         if ((xpos + var->xres > base_var->xres) ||
 800             (ypos + var->yres > base_var->yres))
 801                 return -EINVAL;
 802
 803         var->xres_virtual = var->xres;
 804         var->yres_virtual = max(var->yres, var->yres_virtual);
 805         return 0;
 806 }
 807
 808 static int overlayfb_check_video_memory(struct pxafb_layer *ofb)
 809 {
 810         struct fb_var_screeninfo *var = &ofb->fb.var;
 811         int pfor = NONSTD_TO_PFOR(var->nonstd);
 812         int size, bpp = 0;
 813
 814         switch (pfor) {
 815         case OVERLAY_FORMAT_RGB: bpp = var->bits_per_pixel; break;
 816         case OVERLAY_FORMAT_YUV444_PACKED: bpp = 24; break;
 817         case OVERLAY_FORMAT_YUV444_PLANAR: bpp = 24; break;
 818         case OVERLAY_FORMAT_YUV422_PLANAR: bpp = 16; break;
 819         case OVERLAY_FORMAT_YUV420_PLANAR: bpp = 12; break;
 820         }
 821
 822         ofb->fb.fix.line_length = var->xres_virtual * bpp / 8;
 823
 824         size = PAGE_ALIGN(ofb->fb.fix.line_length * var->yres_virtual);
 825
 826         if (ofb->video_mem) {
 827                 if (ofb->video_mem_size >= size)
 828                         return 0;
 829         }
 830         return -EINVAL;
 831 }
 832
 833 static int overlayfb_set_par(struct fb_info *info)
 834 {
 835         struct pxafb_layer *ofb = (struct pxafb_layer *)info;
 836         struct fb_var_screeninfo *var = &info->var;
 837         int xpos, ypos, pfor, bpp, ret;
 838
 839         ret = overlayfb_check_video_memory(ofb);
 840         if (ret)
 841                 return ret;
 842
 843         bpp  = pxafb_var_to_bpp(var);
 844         xpos = NONSTD_TO_XPOS(var->nonstd);
 845         ypos = NONSTD_TO_YPOS(var->nonstd);
 846         pfor = NONSTD_TO_PFOR(var->nonstd);
 847
 848         ofb->control[0] = OVLxC1_PPL(var->xres) | OVLxC1_LPO(var->yres) |
 849                           OVLxC1_BPP(bpp);
 850         ofb->control[1] = OVLxC2_XPOS(xpos) | OVLxC2_YPOS(ypos);
 851
 852         if (ofb->id == OVERLAY2)
 853                 ofb->control[1] |= OVL2C2_PFOR(pfor);
 854
 855         ofb->ops->setup(ofb);
 856         ofb->ops->enable(ofb);
 857         return 0;
 858 }
 859
 860 static struct fb_ops overlay_fb_ops = {
 861         .owner                  = THIS_MODULE,
 862         .fb_open                = overlayfb_open,
 863         .fb_release             = overlayfb_release,
 864         .fb_check_var           = overlayfb_check_var,
 865         .fb_set_par             = overlayfb_set_par,
 866 };
 867
 868 static void __devinit init_pxafb_overlay(struct pxafb_info *fbi,
 869                                          struct pxafb_layer *ofb, int id)
 870 {
 871         sprintf(ofb->fb.fix.id, "overlay%d", id + 1);
 872
 873         ofb->fb.fix.type                = FB_TYPE_PACKED_PIXELS;
 874         ofb->fb.fix.xpanstep            = 0;
 875         ofb->fb.fix.ypanstep            = 1;
 876
 877         ofb->fb.var.activate            = FB_ACTIVATE_NOW;
 878         ofb->fb.var.height              = -1;
 879         ofb->fb.var.width               = -1;
 880         ofb->fb.var.vmode               = FB_VMODE_NONINTERLACED;
 881
 882         ofb->fb.fbops                   = &overlay_fb_ops;
 883         ofb->fb.flags                   = FBINFO_FLAG_DEFAULT;
 884         ofb->fb.node                    = -1;
 885         ofb->fb.pseudo_palette          = NULL;
 886
 887         ofb->id = id;
 888         ofb->ops = &ofb_ops[id];
 889         ofb->usage = 0;
 890         ofb->fbi = fbi;
 891         init_completion(&ofb->branch_done);
 892 }
 893
 894 static inline int pxafb_overlay_supported(void)
 895 {
 896         if (cpu_is_pxa27x() || cpu_is_pxa3xx())
 897                 return 1;
 898
 899         return 0;
 900 }
 901
 902 static int __devinit pxafb_overlay_map_video_memory(struct pxafb_info *pxafb,
 903         struct pxafb_layer *ofb)
 904 {
 905         /* We assume that user will use at most video_mem_size for overlay fb,
 906          * anyway, it's useless to use 16bpp main plane and 24bpp overlay
 907          */
 908         ofb->video_mem = alloc_pages_exact(PAGE_ALIGN(pxafb->video_mem_size),
 909                 GFP_KERNEL | __GFP_ZERO);
 910         if (ofb->video_mem == NULL)
 911                 return -ENOMEM;
 912
 913         ofb->video_mem_phys = virt_to_phys(ofb->video_mem);
 914         ofb->video_mem_size = PAGE_ALIGN(pxafb->video_mem_size);
 915
 916         mutex_lock(&ofb->fb.mm_lock);
 917         ofb->fb.fix.smem_start  = ofb->video_mem_phys;
 918         ofb->fb.fix.smem_len    = pxafb->video_mem_size;
 919         mutex_unlock(&ofb->fb.mm_lock);
 920
 921         ofb->fb.screen_base     = ofb->video_mem;
 922
 923         return 0;
 924 }
 925
 926 static void __devinit pxafb_overlay_init(struct pxafb_info *fbi)
 927 {
 928         int i, ret;
 929
 930         if (!pxafb_overlay_supported())
 931                 return;
 932
 933         for (i = 0; i < 2; i++) {
 934                 struct pxafb_layer *ofb = &fbi->overlay[i];
 935                 init_pxafb_overlay(fbi, ofb, i);
 936                 ret = register_framebuffer(&ofb->fb);
 937                 if (ret) {
 938                         dev_err(fbi->dev, "failed to register overlay %d\n", i);
 939                         continue;
 940                 }
 941                 ret = pxafb_overlay_map_video_memory(fbi, ofb);
 942                 if (ret) {
 943                         dev_err(fbi->dev,
 944                                 "failed to map video memory for overlay %d\n",
 945                                 i);
 946                         unregister_framebuffer(&ofb->fb);
 947                         continue;
 948                 }
 949                 ofb->registered = 1;
 950         }
 951
 952         /* mask all IU/BS/EOF/SOF interrupts */
 953         lcd_writel(fbi, LCCR5, ~0);
 954
 955         pr_info("PXA Overlay driver loaded successfully!\n");
 956 }
 957
 958 static void __devexit pxafb_overlay_exit(struct pxafb_info *fbi)
 959 {
 960         int i;
 961
 962         if (!pxafb_overlay_supported())
 963                 return;
 964
 965         for (i = 0; i < 2; i++) {
 966                 struct pxafb_layer *ofb = &fbi->overlay[i];
 967                 if (ofb->registered) {
 968                         if (ofb->video_mem)
 969                                 free_pages_exact(ofb->video_mem,
 970                                         ofb->video_mem_size);
 971                         unregister_framebuffer(&ofb->fb);
 972                 }
 973         }
 974 }
 975 #else
 976 static inline void pxafb_overlay_init(struct pxafb_info *fbi) {}
 977 static inline void pxafb_overlay_exit(struct pxafb_info *fbi) {}
 978 #endif /* CONFIG_FB_PXA_OVERLAY */
 979
 980 /*
 981  * Calculate the PCD value from the clock rate (in picoseconds).
 982  * We take account of the PPCR clock setting.
 983  * From PXA Developer's Manual:
 984  *
 985  *   PixelClock =      LCLK
 986  *                -------------
 987  *                2 ( PCD + 1 )
 988  *
 989  *   PCD =      LCLK
 990  *         ------------- - 1
 991  *         2(PixelClock)
 992  *
 993  * Where:
 994  *   LCLK = LCD/Memory Clock
 995  *   PCD = LCCR3[7:0]
 996  *
 997  * PixelClock here is in Hz while the pixclock argument given is the
 998  * period in picoseconds. Hence PixelClock = 1 / ( pixclock * 10^-12 )
 999  *
1000  * The function get_lclk_frequency_10khz returns LCLK in units of
1001  * 10khz. Calling the result of this function lclk gives us the
1002  * following
1003  *
1004  *    PCD = (lclk * 10^4 ) * ( pixclock * 10^-12 )
1005  *          -------------------------------------- - 1
1006  *                          2
1007  *
1008  * Factoring the 10^4 and 10^-12 out gives 10^-8 == 1 / 100000000 as used below.
1009  */
1010 static inline unsigned int get_pcd(struct pxafb_info *fbi,
1011                                    unsigned int pixclock)
1012 {
1013         unsigned long long pcd;
1014
1015         /* FIXME: Need to take into account Double Pixel Clock mode
1016          * (DPC) bit? or perhaps set it based on the various clock
1017          * speeds */
1018         pcd = (unsigned long long)(clk_get_rate(fbi->clk) / 10000);
1019         pcd *= pixclock;
1020         do_div(pcd, 100000000 * 2);
1021         /* no need for this, since we should subtract 1 anyway. they cancel */
1022         /* pcd += 1; */ /* make up for integer math truncations */
1023         return (unsigned int)pcd;
1024 }
1025
1026 /*
1027  * Some touchscreens need hsync information from the video driver to
1028  * function correctly. We export it here.  Note that 'hsync_time' and
1029  * the value returned from pxafb_get_hsync_time() is the *reciprocal*
1030  * of the hsync period in seconds.
1031  */
1032 static inline void set_hsync_time(struct pxafb_info *fbi, unsigned int pcd)
1033 {
1034         unsigned long htime;
1035
1036         if ((pcd == 0) || (fbi->fb.var.hsync_len == 0)) {
1037                 fbi->hsync_time = 0;
1038                 return;
1039         }
1040
1041         htime = clk_get_rate(fbi->clk) / (pcd * fbi->fb.var.hsync_len);
1042
1043         fbi->hsync_time = htime;
1044 }
1045
1046 unsigned long pxafb_get_hsync_time(struct device *dev)
1047 {
1048         struct pxafb_info *fbi = dev_get_drvdata(dev);
1049
1050         /* If display is blanked/suspended, hsync isn't active */
1051         if (!fbi || (fbi->state != C_ENABLE))
1052                 return 0;
1053
1054         return fbi->hsync_time;
1055 }
1056 EXPORT_SYMBOL(pxafb_get_hsync_time);
1057
1058 static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal,
1059                            unsigned long start, size_t size)
1060 {
1061         struct pxafb_dma_descriptor *dma_desc, *pal_desc;
1062         unsigned int dma_desc_off, pal_desc_off;
1063
1064         if (dma < 0 || dma >= DMA_MAX * 2)
1065                 return -EINVAL;
1066
1067         dma_desc = &fbi->dma_buff->dma_desc[dma];
1068         dma_desc_off = offsetof(struct pxafb_dma_buff, dma_desc[dma]);
1069
1070         dma_desc->fsadr = start;
1071         dma_desc->fidr  = 0;
1072         dma_desc->ldcmd = size;
1073
1074         if (pal < 0 || pal >= PAL_MAX * 2) {
1075                 dma_desc->fdadr = fbi->dma_buff_phys + dma_desc_off;
1076                 fbi->fdadr[dma] = fbi->dma_buff_phys + dma_desc_off;
1077         } else {
1078                 pal_desc = &fbi->dma_buff->pal_desc[pal];
1079                 pal_desc_off = offsetof(struct pxafb_dma_buff, pal_desc[pal]);
1080
1081                 pal_desc->fsadr = fbi->dma_buff_phys + pal * PALETTE_SIZE;
1082                 pal_desc->fidr  = 0;
1083
1084                 if ((fbi->lccr4 & LCCR4_PAL_FOR_MASK) == LCCR4_PAL_FOR_0)
1085                         pal_desc->ldcmd = fbi->palette_size * sizeof(u16);
1086                 else
1087                         pal_desc->ldcmd = fbi->palette_size * sizeof(u32);
1088
1089                 pal_desc->ldcmd |= LDCMD_PAL;
1090
1091                 /* flip back and forth between palette and frame buffer */
1092                 pal_desc->fdadr = fbi->dma_buff_phys + dma_desc_off;
1093                 dma_desc->fdadr = fbi->dma_buff_phys + pal_desc_off;
1094                 fbi->fdadr[dma] = fbi->dma_buff_phys + dma_desc_off;
1095         }
1096
1097         return 0;
1098 }
1099
1100 static void setup_base_frame(struct pxafb_info *fbi,
1101                              struct fb_var_screeninfo *var,
1102                              int branch)
1103 {
1104         struct fb_fix_screeninfo *fix = &fbi->fb.fix;
1105         int nbytes, dma, pal, bpp = var->bits_per_pixel;
1106         unsigned long offset;
1107
1108         dma = DMA_BASE + (branch ? DMA_MAX : 0);
1109         pal = (bpp >= 16) ? PAL_NONE : PAL_BASE + (branch ? PAL_MAX : 0);
1110
1111         nbytes = fix->line_length * var->yres;
1112         offset = fix->line_length * var->yoffset + fbi->video_mem_phys;
1113
1114         if (fbi->lccr0 & LCCR0_SDS) {
1115                 nbytes = nbytes / 2;
1116                 setup_frame_dma(fbi, dma + 1, PAL_NONE, offset + nbytes, nbytes);
1117         }
1118
1119         setup_frame_dma(fbi, dma, pal, offset, nbytes);
1120 }
1121
1122 #ifdef CONFIG_FB_PXA_SMARTPANEL
1123 static int setup_smart_dma(struct pxafb_info *fbi)
1124 {
1125         struct pxafb_dma_descriptor *dma_desc;
1126         unsigned long dma_desc_off, cmd_buff_off;
1127
1128         dma_desc = &fbi->dma_buff->dma_desc[DMA_CMD];
1129         dma_desc_off = offsetof(struct pxafb_dma_buff, dma_desc[DMA_CMD]);
1130         cmd_buff_off = offsetof(struct pxafb_dma_buff, cmd_buff);
1131
1132         dma_desc->fdadr = fbi->dma_buff_phys + dma_desc_off;
1133         dma_desc->fsadr = fbi->dma_buff_phys + cmd_buff_off;
1134         dma_desc->fidr  = 0;
1135         dma_desc->ldcmd = fbi->n_smart_cmds * sizeof(uint16_t);
1136
1137         fbi->fdadr[DMA_CMD] = dma_desc->fdadr;
1138         return 0;
1139 }
1140
1141 int pxafb_smart_flush(struct fb_info *info)
1142 {
1143         struct pxafb_info *fbi = container_of(info, struct pxafb_info, fb);
1144         uint32_t prsr;
1145         int ret = 0;
1146
1147         /* disable controller until all registers are set up */
1148         lcd_writel(fbi, LCCR0, fbi->reg_lccr0 & ~LCCR0_ENB);
1149
1150         /* 1. make it an even number of commands to align on 32-bit boundary
1151          * 2. add the interrupt command to the end of the chain so we can
1152          *    keep track of the end of the transfer
1153          */
1154
1155         while (fbi->n_smart_cmds & 1)
1156                 fbi->smart_cmds[fbi->n_smart_cmds++] = SMART_CMD_NOOP;
1157
1158         fbi->smart_cmds[fbi->n_smart_cmds++] = SMART_CMD_INTERRUPT;
1159         fbi->smart_cmds[fbi->n_smart_cmds++] = SMART_CMD_WAIT_FOR_VSYNC;
1160         setup_smart_dma(fbi);
1161
1162         /* continue to execute next command */
1163         prsr = lcd_readl(fbi, PRSR) | PRSR_ST_OK | PRSR_CON_NT;
1164         lcd_writel(fbi, PRSR, prsr);
1165
1166         /* stop the processor in case it executed "wait for sync" cmd */
1167         lcd_writel(fbi, CMDCR, 0x0001);
1168
1169         /* don't send interrupts for fifo underruns on channel 6 */
1170         lcd_writel(fbi, LCCR5, LCCR5_IUM(6));
1171
1172         lcd_writel(fbi, LCCR1, fbi->reg_lccr1);
1173         lcd_writel(fbi, LCCR2, fbi->reg_lccr2);
1174         lcd_writel(fbi, LCCR3, fbi->reg_lccr3);
1175         lcd_writel(fbi, LCCR4, fbi->reg_lccr4);
1176         lcd_writel(fbi, FDADR0, fbi->fdadr[0]);
1177         lcd_writel(fbi, FDADR6, fbi->fdadr[6]);
1178
1179         /* begin sending */
1180         lcd_writel(fbi, LCCR0, fbi->reg_lccr0 | LCCR0_ENB);
1181
1182         if (wait_for_completion_timeout(&fbi->command_done, HZ/2) == 0) {
1183                 pr_warning("%s: timeout waiting for command done\n",
1184                                 __func__);
1185                 ret = -ETIMEDOUT;
1186         }
1187
1188         /* quick disable */
1189         prsr = lcd_readl(fbi, PRSR) & ~(PRSR_ST_OK | PRSR_CON_NT);
1190         lcd_writel(fbi, PRSR, prsr);
1191         lcd_writel(fbi, LCCR0, fbi->reg_lccr0 & ~LCCR0_ENB);
1192         lcd_writel(fbi, FDADR6, 0);
1193         fbi->n_smart_cmds = 0;
1194         return ret;
1195 }
1196
1197 int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int n_cmds)
1198 {
1199         int i;
1200         struct pxafb_info *fbi = container_of(info, struct pxafb_info, fb);
1201
1202         for (i = 0; i < n_cmds; i++, cmds++) {
1203                 /* if it is a software delay, flush and delay */
1204                 if ((*cmds & 0xff00) == SMART_CMD_DELAY) {
1205                         pxafb_smart_flush(info);
1206                         mdelay(*cmds & 0xff);
1207                         continue;
1208                 }
1209
1210                 /* leave 2 commands for INTERRUPT and WAIT_FOR_SYNC */
1211                 if (fbi->n_smart_cmds == CMD_BUFF_SIZE - 8)
1212                         pxafb_smart_flush(info);
1213
1214                 fbi->smart_cmds[fbi->n_smart_cmds++] = *cmds;
1215         }
1216
1217         return 0;
1218 }
1219
1220 static unsigned int __smart_timing(unsigned time_ns, unsigned long lcd_clk)
1221 {
1222         unsigned int t = (time_ns * (lcd_clk / 1000000) / 1000);
1223         return (t == 0) ? 1 : t;
1224 }
1225
1226 static void setup_smart_timing(struct pxafb_info *fbi,
1227                                 struct fb_var_screeninfo *var)
1228 {
1229         struct pxafb_mach_info *inf = fbi->dev->platform_data;
1230         struct pxafb_mode_info *mode = &inf->modes[0];
1231         unsigned long lclk = clk_get_rate(fbi->clk);
1232         unsigned t1, t2, t3, t4;
1233
1234         t1 = max(mode->a0csrd_set_hld, mode->a0cswr_set_hld);
1235         t2 = max(mode->rd_pulse_width, mode->wr_pulse_width);
1236         t3 = mode->op_hold_time;
1237         t4 = mode->cmd_inh_time;
1238
1239         fbi->reg_lccr1 =
1240                 LCCR1_DisWdth(var->xres) |
1241                 LCCR1_BegLnDel(__smart_timing(t1, lclk)) |
1242                 LCCR1_EndLnDel(__smart_timing(t2, lclk)) |
1243                 LCCR1_HorSnchWdth(__smart_timing(t3, lclk));
1244
1245         fbi->reg_lccr2 = LCCR2_DisHght(var->yres);
1246         fbi->reg_lccr3 = fbi->lccr3 | LCCR3_PixClkDiv(__smart_timing(t4, lclk));
1247         fbi->reg_lccr3 |= (var->sync & FB_SYNC_HOR_HIGH_ACT) ? LCCR3_HSP : 0;
1248         fbi->reg_lccr3 |= (var->sync & FB_SYNC_VERT_HIGH_ACT) ? LCCR3_VSP : 0;
1249
1250         /* FIXME: make this configurable */
1251         fbi->reg_cmdcr = 1;
1252 }
1253
1254 static int pxafb_smart_thread(void *arg)
1255 {
1256         struct pxafb_info *fbi = arg;
1257         struct pxafb_mach_info *inf = fbi->dev->platform_data;
1258
1259         if (!inf->smart_update) {
1260                 pr_err("%s: not properly initialized, thread terminated\n",
1261                                 __func__);
1262                 return -EINVAL;
1263         }
1264         inf = fbi->dev->platform_data;
1265
1266         pr_debug("%s(): task starting\n", __func__);
1267
1268         set_freezable();
1269         while (!kthread_should_stop()) {
1270
1271                 if (try_to_freeze())
1272                         continue;
1273
1274                 mutex_lock(&fbi->ctrlr_lock);
1275
1276                 if (fbi->state == C_ENABLE) {
1277                         inf->smart_update(&fbi->fb);
1278                         complete(&fbi->refresh_done);
1279                 }
1280
1281                 mutex_unlock(&fbi->ctrlr_lock);
1282
1283                 set_current_state(TASK_INTERRUPTIBLE);
1284                 schedule_timeout(30 * HZ / 1000);
1285         }
1286
1287         pr_debug("%s(): task ending\n", __func__);
1288         return 0;
1289 }
1290
1291 static int pxafb_smart_init(struct pxafb_info *fbi)
1292 {
1293         if (!(fbi->lccr0 & LCCR0_LCDT))
1294                 return 0;
1295
1296         fbi->smart_cmds = (uint16_t *) fbi->dma_buff->cmd_buff;
1297         fbi->n_smart_cmds = 0;
1298
1299         init_completion(&fbi->command_done);
1300         init_completion(&fbi->refresh_done);
1301
1302         fbi->smart_thread = kthread_run(pxafb_smart_thread, fbi,
1303                                         "lcd_refresh");
1304         if (IS_ERR(fbi->smart_thread)) {
1305                 pr_err("%s: unable to create kernel thread\n", __func__);
1306                 return PTR_ERR(fbi->smart_thread);
1307         }
1308
1309         return 0;
1310 }
1311 #else
1312 static inline int pxafb_smart_init(struct pxafb_info *fbi) { return 0; }
1313 #endif /* CONFIG_FB_PXA_SMARTPANEL */
1314
1315 static void setup_parallel_timing(struct pxafb_info *fbi,
1316                                   struct fb_var_screeninfo *var)
1317 {
1318         unsigned int lines_per_panel, pcd = get_pcd(fbi, var->pixclock);
1319
1320         fbi->reg_lccr1 =
1321                 LCCR1_DisWdth(var->xres) +
1322                 LCCR1_HorSnchWdth(var->hsync_len) +
1323                 LCCR1_BegLnDel(var->left_margin) +
1324                 LCCR1_EndLnDel(var->right_margin);
1325
1326         /*
1327          * If we have a dual scan LCD, we need to halve
1328          * the YRES parameter.
1329          */
1330         lines_per_panel = var->yres;
1331         if ((fbi->lccr0 & LCCR0_SDS) == LCCR0_Dual)
1332                 lines_per_panel /= 2;
1333
1334         fbi->reg_lccr2 =
1335                 LCCR2_DisHght(lines_per_panel) +
1336                 LCCR2_VrtSnchWdth(var->vsync_len) +
1337                 LCCR2_BegFrmDel(var->upper_margin) +
1338                 LCCR2_EndFrmDel(var->lower_margin);
1339
1340         fbi->reg_lccr3 = fbi->lccr3 |
1341                 (var->sync & FB_SYNC_HOR_HIGH_ACT ?
1342                  LCCR3_HorSnchH : LCCR3_HorSnchL) |
1343                 (var->sync & FB_SYNC_VERT_HIGH_ACT ?
1344                  LCCR3_VrtSnchH : LCCR3_VrtSnchL);
1345
1346         if (pcd) {
1347                 fbi->reg_lccr3 |= LCCR3_PixClkDiv(pcd);
1348                 set_hsync_time(fbi, pcd);
1349         }
1350 }
1351
1352 /*
1353  * pxafb_activate_var():
1354  *      Configures LCD Controller based on entries in var parameter.
1355  *      Settings are only written to the controller if changes were made.
1356  */
1357 static int pxafb_activate_var(struct fb_var_screeninfo *var,
1358                               struct pxafb_info *fbi)
1359 {
1360         u_long flags;
1361
1362         /* Update shadow copy atomically */
1363         local_irq_save(flags);
1364
1365 #ifdef CONFIG_FB_PXA_SMARTPANEL
1366         if (fbi->lccr0 & LCCR0_LCDT)
1367                 setup_smart_timing(fbi, var);
1368         else
1369 #endif
1370                 setup_parallel_timing(fbi, var);
1371
1372         setup_base_frame(fbi, var, 0);
1373
1374         fbi->reg_lccr0 = fbi->lccr0 |
1375                 (LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM |
1376                  LCCR0_QDM | LCCR0_BM  | LCCR0_OUM);
1377
1378         fbi->reg_lccr3 |= pxafb_var_to_lccr3(var);
1379
1380         fbi->reg_lccr4 = lcd_readl(fbi, LCCR4) & ~LCCR4_PAL_FOR_MASK;
1381         fbi->reg_lccr4 |= (fbi->lccr4 & LCCR4_PAL_FOR_MASK);
1382         local_irq_restore(flags);
1383
1384         /*
1385          * Only update the registers if the controller is enabled
1386          * and something has changed.
1387          */
1388         if ((lcd_readl(fbi, LCCR0) != fbi->reg_lccr0) ||
1389             (lcd_readl(fbi, LCCR1) != fbi->reg_lccr1) ||
1390             (lcd_readl(fbi, LCCR2) != fbi->reg_lccr2) ||
1391             (lcd_readl(fbi, LCCR3) != fbi->reg_lccr3) ||
1392             (lcd_readl(fbi, LCCR4) != fbi->reg_lccr4) ||
1393             (lcd_readl(fbi, FDADR0) != fbi->fdadr[0]) ||
1394             ((fbi->lccr0 & LCCR0_SDS) &&
1395             (lcd_readl(fbi, FDADR1) != fbi->fdadr[1])))
1396                 pxafb_schedule_work(fbi, C_REENABLE);
1397
1398         return 0;
1399 }
1400
1401 /*
1402  * NOTE!  The following functions are purely helpers for set_ctrlr_state.
1403  * Do not call them directly; set_ctrlr_state does the correct serialisation
1404  * to ensure that things happen in the right way 100% of time time.
1405  *      -- rmk
1406  */
1407 static inline void __pxafb_backlight_power(struct pxafb_info *fbi, int on)
1408 {
1409         pr_debug("pxafb: backlight o%s\n", on ? "n" : "ff");
1410
1411         if (fbi->backlight_power)
1412                 fbi->backlight_power(on);
1413 }
1414
1415 static inline void __pxafb_lcd_power(struct pxafb_info *fbi, int on)
1416 {
1417         pr_debug("pxafb: LCD power o%s\n", on ? "n" : "ff");
1418
1419         if (fbi->lcd_power)
1420                 fbi->lcd_power(on, &fbi->fb.var);
1421 }
1422
1423 static void pxafb_enable_controller(struct pxafb_info *fbi)
1424 {
1425         pr_debug("pxafb: Enabling LCD controller\n");
1426         pr_debug("fdadr0 0x%08x\n", (unsigned int) fbi->fdadr[0]);
1427         pr_debug("fdadr1 0x%08x\n", (unsigned int) fbi->fdadr[1]);
1428         pr_debug("reg_lccr0 0x%08x\n", (unsigned int) fbi->reg_lccr0);
1429         pr_debug("reg_lccr1 0x%08x\n", (unsigned int) fbi->reg_lccr1);
1430         pr_debug("reg_lccr2 0x%08x\n", (unsigned int) fbi->reg_lccr2);
1431         pr_debug("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3);
1432
1433         /* enable LCD controller clock */
1434         clk_enable(fbi->clk);
1435
1436         if (fbi->lccr0 & LCCR0_LCDT)
1437                 return;
1438
1439         /* Sequence from 11.7.10 */
1440         lcd_writel(fbi, LCCR4, fbi->reg_lccr4);
1441         lcd_writel(fbi, LCCR3, fbi->reg_lccr3);
1442         lcd_writel(fbi, LCCR2, fbi->reg_lccr2);
1443         lcd_writel(fbi, LCCR1, fbi->reg_lccr1);
1444         lcd_writel(fbi, LCCR0, fbi->reg_lccr0 & ~LCCR0_ENB);
1445
1446         lcd_writel(fbi, FDADR0, fbi->fdadr[0]);
1447         if (fbi->lccr0 & LCCR0_SDS)
1448                 lcd_writel(fbi, FDADR1, fbi->fdadr[1]);
1449         lcd_writel(fbi, LCCR0, fbi->reg_lccr0 | LCCR0_ENB);
1450 }
1451
1452 static void pxafb_disable_controller(struct pxafb_info *fbi)
1453 {
1454         uint32_t lccr0;
1455
1456 #ifdef CONFIG_FB_PXA_SMARTPANEL
1457         if (fbi->lccr0 & LCCR0_LCDT) {
1458                 wait_for_completion_timeout(&fbi->refresh_done,
1459                                 200 * HZ / 1000);
1460                 return;
1461         }
1462 #endif
1463
1464         /* Clear LCD Status Register */
1465         lcd_writel(fbi, LCSR, 0xffffffff);
1466
1467         lccr0 = lcd_readl(fbi, LCCR0) & ~LCCR0_LDM;
1468         lcd_writel(fbi, LCCR0, lccr0);
1469         lcd_writel(fbi, LCCR0, lccr0 | LCCR0_DIS);
1470
1471         wait_for_completion_timeout(&fbi->disable_done, 200 * HZ / 1000);
1472
1473         /* disable LCD controller clock */
1474         clk_disable(fbi->clk);
1475 }
1476
1477 /*
1478  *  pxafb_handle_irq: Handle 'LCD DONE' interrupts.
1479  */
1480 static irqreturn_t pxafb_handle_irq(int irq, void *dev_id)
1481 {
1482         struct pxafb_info *fbi = dev_id;
1483         unsigned int lccr0, lcsr;
1484
1485         lcsr = lcd_readl(fbi, LCSR);
1486         if (lcsr & LCSR_LDD) {
1487                 lccr0 = lcd_readl(fbi, LCCR0);
1488                 lcd_writel(fbi, LCCR0, lccr0 | LCCR0_LDM);
1489                 complete(&fbi->disable_done);
1490         }
1491
1492 #ifdef CONFIG_FB_PXA_SMARTPANEL
1493         if (lcsr & LCSR_CMD_INT)
1494                 complete(&fbi->command_done);
1495 #endif
1496         lcd_writel(fbi, LCSR, lcsr);
1497
1498 #ifdef CONFIG_FB_PXA_OVERLAY
1499         {
1500                 unsigned int lcsr1 = lcd_readl(fbi, LCSR1);
1501                 if (lcsr1 & LCSR1_BS(1))
1502                         complete(&fbi->overlay[0].branch_done);
1503
1504                 if (lcsr1 & LCSR1_BS(2))
1505                         complete(&fbi->overlay[1].branch_done);
1506
1507                 lcd_writel(fbi, LCSR1, lcsr1);
1508         }
1509 #endif
1510         return IRQ_HANDLED;
1511 }
1512
1513 /*
1514  * This function must be called from task context only, since it will
1515  * sleep when disabling the LCD controller, or if we get two contending
1516  * processes trying to alter state.
1517  */
1518 static void set_ctrlr_state(struct pxafb_info *fbi, u_int state)
1519 {
1520         u_int old_state;
1521
1522         mutex_lock(&fbi->ctrlr_lock);
1523
1524         old_state = fbi->state;
1525
1526         /*
1527          * Hack around fbcon initialisation.
1528          */
1529         if (old_state == C_STARTUP && state == C_REENABLE)
1530                 state = C_ENABLE;
1531
1532         switch (state) {
1533         case C_DISABLE_CLKCHANGE:
1534                 /*
1535                  * Disable controller for clock change.  If the
1536                  * controller is already disabled, then do nothing.
1537                  */
1538                 if (old_state != C_DISABLE && old_state != C_DISABLE_PM) {
1539                         fbi->state = state;
1540                         /* TODO __pxafb_lcd_power(fbi, 0); */
1541                         pxafb_disable_controller(fbi);
1542                 }
1543                 break;
1544
1545         case C_DISABLE_PM:
1546         case C_DISABLE:
1547                 /*
1548                  * Disable controller
1549                  */
1550                 if (old_state != C_DISABLE) {
1551                         fbi->state = state;
1552                         __pxafb_backlight_power(fbi, 0);
1553                         __pxafb_lcd_power(fbi, 0);
1554                         if (old_state != C_DISABLE_CLKCHANGE)
1555                                 pxafb_disable_controller(fbi);
1556                 }
1557                 break;
1558
1559         case C_ENABLE_CLKCHANGE:
1560                 /*
1561                  * Enable the controller after clock change.  Only
1562                  * do this if we were disabled for the clock change.
1563                  */
1564                 if (old_state == C_DISABLE_CLKCHANGE) {
1565                         fbi->state = C_ENABLE;
1566                         pxafb_enable_controller(fbi);
1567                         /* TODO __pxafb_lcd_power(fbi, 1); */
1568                 }
1569                 break;
1570
1571         case C_REENABLE:
1572                 /*
1573                  * Re-enable the controller only if it was already
1574                  * enabled.  This is so we reprogram the control
1575                  * registers.
1576                  */
1577                 if (old_state == C_ENABLE) {
1578                         __pxafb_lcd_power(fbi, 0);
1579                         pxafb_disable_controller(fbi);
1580                         pxafb_enable_controller(fbi);
1581                         __pxafb_lcd_power(fbi, 1);
1582                 }
1583                 break;
1584
1585         case C_ENABLE_PM:
1586                 /*
1587                  * Re-enable the controller after PM.  This is not
1588                  * perfect - think about the case where we were doing
1589                  * a clock change, and we suspended half-way through.
1590                  */
1591                 if (old_state != C_DISABLE_PM)
1592                         break;
1593                 /* fall through */
1594
1595         case C_ENABLE:
1596                 /*
1597                  * Power up the LCD screen, enable controller, and
1598                  * turn on the backlight.
1599                  */
1600                 if (old_state != C_ENABLE) {
1601                         fbi->state = C_ENABLE;
1602                         pxafb_enable_controller(fbi);
1603                         __pxafb_lcd_power(fbi, 1);
1604                         __pxafb_backlight_power(fbi, 1);
1605                 }
1606                 break;
1607         }
1608         mutex_unlock(&fbi->ctrlr_lock);
1609 }
1610
1611 /*
1612  * Our LCD controller task (which is called when we blank or unblank)
1613  * via keventd.
1614  */
1615 static void pxafb_task(struct work_struct *work)
1616 {
1617         struct pxafb_info *fbi =
1618                 container_of(work, struct pxafb_info, task);
1619         u_int state = xchg(&fbi->task_state, -1);
1620
1621         set_ctrlr_state(fbi, state);
1622 }
1623
1624 #ifdef CONFIG_CPU_FREQ
1625 /*
1626  * CPU clock speed change handler.  We need to adjust the LCD timing
1627  * parameters when the CPU clock is adjusted by the power management
1628  * subsystem.
1629  *
1630  * TODO: Determine why f->new != 10*get_lclk_frequency_10khz()
1631  */
1632 static int
1633 pxafb_freq_transition(struct notifier_block *nb, unsigned long val, void *data)
1634 {
1635         struct pxafb_info *fbi = TO_INF(nb, freq_transition);
1636         /* TODO struct cpufreq_freqs *f = data; */
1637         u_int pcd;
1638
1639         switch (val) {
1640         case CPUFREQ_PRECHANGE:
1641 #ifdef CONFIG_FB_PXA_OVERLAY
1642                 if (!(fbi->overlay[0].usage || fbi->overlay[1].usage))
1643 #endif
1644                         set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE);
1645                 break;
1646
1647         case CPUFREQ_POSTCHANGE:
1648                 pcd = get_pcd(fbi, fbi->fb.var.pixclock);
1649                 set_hsync_time(fbi, pcd);
1650                 fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) |
1651                                   LCCR3_PixClkDiv(pcd);
1652                 set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE);
1653                 break;
1654         }
1655         return 0;
1656 }
1657
1658 static int
1659 pxafb_freq_policy(struct notifier_block *nb, unsigned long val, void *data)
1660 {
1661         struct pxafb_info *fbi = TO_INF(nb, freq_policy);
1662         struct fb_var_screeninfo *var = &fbi->fb.var;
1663         struct cpufreq_policy *policy = data;
1664
1665         switch (val) {
1666         case CPUFREQ_ADJUST:
1667         case CPUFREQ_INCOMPATIBLE:
1668                 pr_debug("min dma period: %d ps, "
1669                         "new clock %d kHz\n", pxafb_display_dma_period(var),
1670                         policy->max);
1671                 /* TODO: fill in min/max values */
1672                 break;
1673         }
1674         return 0;
1675 }
1676 #endif
1677
1678 #ifdef CONFIG_PM
1679 /*
1680  * Power management hooks.  Note that we won't be called from IRQ context,
1681  * unlike the blank functions above, so we may sleep.
1682  */
1683 static int pxafb_suspend(struct device *dev)
1684 {
1685         struct pxafb_info *fbi = dev_get_drvdata(dev);
1686
1687         set_ctrlr_state(fbi, C_DISABLE_PM);
1688         return 0;
1689 }
1690
1691 static int pxafb_resume(struct device *dev)
1692 {
1693         struct pxafb_info *fbi = dev_get_drvdata(dev);
1694
1695         set_ctrlr_state(fbi, C_ENABLE_PM);
1696         return 0;
1697 }
1698
1699 static const struct dev_pm_ops pxafb_pm_ops = {
1700         .suspend        = pxafb_suspend,
1701         .resume         = pxafb_resume,
1702 };
1703 #endif
1704
1705 static int __devinit pxafb_init_video_memory(struct pxafb_info *fbi)
1706 {
1707         int size = PAGE_ALIGN(fbi->video_mem_size);
1708
1709         fbi->video_mem = alloc_pages_exact(size, GFP_KERNEL | __GFP_ZERO);
1710         if (fbi->video_mem == NULL)
1711                 return -ENOMEM;
1712
1713         fbi->video_mem_phys = virt_to_phys(fbi->video_mem);
1714         fbi->video_mem_size = size;
1715
1716         fbi->fb.fix.smem_start  = fbi->video_mem_phys;
1717         fbi->fb.fix.smem_len    = fbi->video_mem_size;
1718         fbi->fb.screen_base     = fbi->video_mem;
1719
1720         return fbi->video_mem ? 0 : -ENOMEM;
1721 }
1722
1723 static void pxafb_decode_mach_info(struct pxafb_info *fbi,
1724                                    struct pxafb_mach_info *inf)
1725 {
1726         unsigned int lcd_conn = inf->lcd_conn;
1727         struct pxafb_mode_info *m;
1728         int i;
1729
1730         fbi->cmap_inverse       = inf->cmap_inverse;
1731         fbi->cmap_static        = inf->cmap_static;
1732         fbi->lccr4              = inf->lccr4;
1733
1734         switch (lcd_conn & LCD_TYPE_MASK) {
1735         case LCD_TYPE_MONO_STN:
1736                 fbi->lccr0 = LCCR0_CMS;
1737                 break;
1738         case LCD_TYPE_MONO_DSTN:
1739                 fbi->lccr0 = LCCR0_CMS | LCCR0_SDS;
1740                 break;
1741         case LCD_TYPE_COLOR_STN:
1742                 fbi->lccr0 = 0;
1743                 break;
1744         case LCD_TYPE_COLOR_DSTN:
1745                 fbi->lccr0 = LCCR0_SDS;
1746                 break;
1747         case LCD_TYPE_COLOR_TFT:
1748                 fbi->lccr0 = LCCR0_PAS;
1749                 break;
1750         case LCD_TYPE_SMART_PANEL:
1751                 fbi->lccr0 = LCCR0_LCDT | LCCR0_PAS;
1752                 break;
1753         default:
1754                 /* fall back to backward compatibility way */
1755                 fbi->lccr0 = inf->lccr0;
1756                 fbi->lccr3 = inf->lccr3;
1757                 goto decode_mode;
1758         }
1759
1760         if (lcd_conn == LCD_MONO_STN_8BPP)
1761                 fbi->lccr0 |= LCCR0_DPD;
1762
1763         fbi->lccr0 |= (lcd_conn & LCD_ALTERNATE_MAPPING) ? LCCR0_LDDALT : 0;
1764
1765         fbi->lccr3 = LCCR3_Acb((inf->lcd_conn >> 10) & 0xff);
1766         fbi->lccr3 |= (lcd_conn & LCD_BIAS_ACTIVE_LOW) ? LCCR3_OEP : 0;
1767         fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL)  ? LCCR3_PCP : 0;
1768
1769 decode_mode:
1770         pxafb_setmode(&fbi->fb.var, &inf->modes[0]);
1771
1772         /* decide video memory size as follows:
1773          * 1. default to mode of maximum resolution
1774          * 2. allow platform to override
1775          * 3. allow module parameter to override
1776          */
1777         for (i = 0, m = &inf->modes[0]; i < inf->num_modes; i++, m++)
1778                 fbi->video_mem_size = max_t(size_t, fbi->video_mem_size,
1779                                 m->xres * m->yres * m->bpp / 8);
1780
1781         if (inf->video_mem_size > fbi->video_mem_size)
1782                 fbi->video_mem_size = inf->video_mem_size;
1783
1784         if (video_mem_size > fbi->video_mem_size)
1785                 fbi->video_mem_size = video_mem_size;
1786 }
1787
1788 static struct pxafb_info * __devinit pxafb_init_fbinfo(struct device *dev)
1789 {
1790         struct pxafb_info *fbi;
1791         void *addr;
1792         struct pxafb_mach_info *inf = dev->platform_data;
1793
1794         /* Alloc the pxafb_info and pseudo_palette in one step */
1795         fbi = kmalloc(sizeof(struct pxafb_info) + sizeof(u32) * 16, GFP_KERNEL);
1796         if (!fbi)
1797                 return NULL;
1798
1799         memset(fbi, 0, sizeof(struct pxafb_info));
1800         fbi->dev = dev;
1801
1802         fbi->clk = clk_get(dev, NULL);
1803         if (IS_ERR(fbi->clk)) {
1804                 kfree(fbi);
1805                 return NULL;
1806         }
1807
1808         strcpy(fbi->fb.fix.id, PXA_NAME);
1809
1810         fbi->fb.fix.type        = FB_TYPE_PACKED_PIXELS;
1811         fbi->fb.fix.type_aux    = 0;
1812         fbi->fb.fix.xpanstep    = 0;
1813         fbi->fb.fix.ypanstep    = 1;
1814         fbi->fb.fix.ywrapstep   = 0;
1815         fbi->fb.fix.accel       = FB_ACCEL_NONE;
1816
1817         fbi->fb.var.nonstd      = 0;
1818         fbi->fb.var.activate    = FB_ACTIVATE_NOW;
1819         fbi->fb.var.height      = -1;
1820         fbi->fb.var.width       = -1;
1821         fbi->fb.var.accel_flags = FB_ACCELF_TEXT;
1822         fbi->fb.var.vmode       = FB_VMODE_NONINTERLACED;
1823
1824         fbi->fb.fbops           = &pxafb_ops;
1825         fbi->fb.flags           = FBINFO_DEFAULT;
1826         fbi->fb.node            = -1;
1827
1828         addr = fbi;
1829         addr = addr + sizeof(struct pxafb_info);
1830         fbi->fb.pseudo_palette  = addr;
1831
1832         fbi->state              = C_STARTUP;
1833         fbi->task_state         = (u_char)-1;
1834
1835         pxafb_decode_mach_info(fbi, inf);
1836
1837 #ifdef CONFIG_FB_PXA_OVERLAY
1838         /* place overlay(s) on top of base */
1839         if (pxafb_overlay_supported())
1840                 fbi->lccr0 |= LCCR0_OUC;
1841 #endif
1842
1843         init_waitqueue_head(&fbi->ctrlr_wait);
1844         INIT_WORK(&fbi->task, pxafb_task);
1845         mutex_init(&fbi->ctrlr_lock);
1846         init_completion(&fbi->disable_done);
1847
1848         return fbi;
1849 }
1850
1851 #ifdef CONFIG_FB_PXA_PARAMETERS
1852 static int __devinit parse_opt_mode(struct device *dev, const char *this_opt)
1853 {
1854         struct pxafb_mach_info *inf = dev->platform_data;
1855
1856         const char *name = this_opt+5;
1857         unsigned int namelen = strlen(name);
1858         int res_specified = 0, bpp_specified = 0;
1859         unsigned int xres = 0, yres = 0, bpp = 0;
1860         int yres_specified = 0;
1861         int i;
1862         for (i = namelen-1; i >= 0; i--) {
1863                 switch (name[i]) {
1864                 case '-':
1865                         namelen = i;
1866                         if (!bpp_specified && !yres_specified) {
1867                                 bpp = simple_strtoul(&name[i+1], NULL, 0);
1868                                 bpp_specified = 1;
1869                         } else
1870                                 goto done;
1871                         break;
1872                 case 'x':
1873                         if (!yres_specified) {
1874                                 yres = simple_strtoul(&name[i+1], NULL, 0);
1875                                 yres_specified = 1;
1876                         } else
1877                                 goto done;
1878                         break;
1879                 case '0' ... '9':
1880                         break;
1881                 default:
1882                         goto done;
1883                 }
1884         }
1885         if (i < 0 && yres_specified) {
1886                 xres = simple_strtoul(name, NULL, 0);
1887                 res_specified = 1;
1888         }
1889 done:
1890         if (res_specified) {
1891                 dev_info(dev, "overriding resolution: %dx%d\n", xres, yres);
1892                 inf->modes[0].xres = xres; inf->modes[0].yres = yres;
1893         }
1894         if (bpp_specified)
1895                 switch (bpp) {
1896                 case 1:
1897                 case 2:
1898                 case 4:
1899                 case 8:
1900                 case 16:
1901                         inf->modes[0].bpp = bpp;
1902                         dev_info(dev, "overriding bit depth: %d\n", bpp);
1903                         break;
1904                 default:
1905                         dev_err(dev, "Depth %d is not valid\n", bpp);
1906                         return -EINVAL;
1907                 }
1908         return 0;
1909 }
1910
1911 static int __devinit parse_opt(struct device *dev, char *this_opt)
1912 {
1913         struct pxafb_mach_info *inf = dev->platform_data;
1914         struct pxafb_mode_info *mode = &inf->modes[0];
1915         char s[64];
1916
1917         s[0] = '\0';
1918
1919         if (!strncmp(this_opt, "vmem:", 5)) {
1920                 video_mem_size = memparse(this_opt + 5, NULL);
1921         } else if (!strncmp(this_opt, "mode:", 5)) {
1922                 return parse_opt_mode(dev, this_opt);
1923         } else if (!strncmp(this_opt, "pixclock:", 9)) {
1924                 mode->pixclock = simple_strtoul(this_opt+9, NULL, 0);
1925                 sprintf(s, "pixclock: %ld\n", mode->pixclock);
1926         } else if (!strncmp(this_opt, "left:", 5)) {
1927                 mode->left_margin = simple_strtoul(this_opt+5, NULL, 0);
1928                 sprintf(s, "left: %u\n", mode->left_margin);
1929         } else if (!strncmp(this_opt, "right:", 6)) {
1930                 mode->right_margin = simple_strtoul(this_opt+6, NULL, 0);
1931                 sprintf(s, "right: %u\n", mode->right_margin);
1932         } else if (!strncmp(this_opt, "upper:", 6)) {
1933                 mode->upper_margin = simple_strtoul(this_opt+6, NULL, 0);
1934                 sprintf(s, "upper: %u\n", mode->upper_margin);
1935         } else if (!strncmp(this_opt, "lower:", 6)) {
1936                 mode->lower_margin = simple_strtoul(this_opt+6, NULL, 0);
1937                 sprintf(s, "lower: %u\n", mode->lower_margin);
1938         } else if (!strncmp(this_opt, "hsynclen:", 9)) {
1939                 mode->hsync_len = simple_strtoul(this_opt+9, NULL, 0);
1940                 sprintf(s, "hsynclen: %u\n", mode->hsync_len);
1941         } else if (!strncmp(this_opt, "vsynclen:", 9)) {
1942                 mode->vsync_len = simple_strtoul(this_opt+9, NULL, 0);
1943                 sprintf(s, "vsynclen: %u\n", mode->vsync_len);
1944         } else if (!strncmp(this_opt, "hsync:", 6)) {
1945                 if (simple_strtoul(this_opt+6, NULL, 0) == 0) {
1946                         sprintf(s, "hsync: Active Low\n");
1947                         mode->sync &= ~FB_SYNC_HOR_HIGH_ACT;
1948                 } else {
1949                         sprintf(s, "hsync: Active High\n");
1950                         mode->sync |= FB_SYNC_HOR_HIGH_ACT;
1951                 }
1952         } else if (!strncmp(this_opt, "vsync:", 6)) {
1953                 if (simple_strtoul(this_opt+6, NULL, 0) == 0) {
1954                         sprintf(s, "vsync: Active Low\n");
1955                         mode->sync &= ~FB_SYNC_VERT_HIGH_ACT;
1956                 } else {
1957                         sprintf(s, "vsync: Active High\n");
1958                         mode->sync |= FB_SYNC_VERT_HIGH_ACT;
1959                 }
1960         } else if (!strncmp(this_opt, "dpc:", 4)) {
1961                 if (simple_strtoul(this_opt+4, NULL, 0) == 0) {
1962                         sprintf(s, "double pixel clock: false\n");
1963                         inf->lccr3 &= ~LCCR3_DPC;
1964                 } else {
1965                         sprintf(s, "double pixel clock: true\n");
1966                         inf->lccr3 |= LCCR3_DPC;
1967                 }
1968         } else if (!strncmp(this_opt, "outputen:", 9)) {
1969                 if (simple_strtoul(this_opt+9, NULL, 0) == 0) {
1970                         sprintf(s, "output enable: active low\n");
1971                         inf->lccr3 = (inf->lccr3 & ~LCCR3_OEP) | LCCR3_OutEnL;
1972                 } else {
1973                         sprintf(s, "output enable: active high\n");
1974                         inf->lccr3 = (inf->lccr3 & ~LCCR3_OEP) | LCCR3_OutEnH;
1975                 }
1976         } else if (!strncmp(this_opt, "pixclockpol:", 12)) {
1977                 if (simple_strtoul(this_opt+12, NULL, 0) == 0) {
1978                         sprintf(s, "pixel clock polarity: falling edge\n");
1979                         inf->lccr3 = (inf->lccr3 & ~LCCR3_PCP) | LCCR3_PixFlEdg;
1980                 } else {
1981                         sprintf(s, "pixel clock polarity: rising edge\n");
1982                         inf->lccr3 = (inf->lccr3 & ~LCCR3_PCP) | LCCR3_PixRsEdg;
1983                 }
1984         } else if (!strncmp(this_opt, "color", 5)) {
1985                 inf->lccr0 = (inf->lccr0 & ~LCCR0_CMS) | LCCR0_Color;
1986         } else if (!strncmp(this_opt, "mono", 4)) {
1987                 inf->lccr0 = (inf->lccr0 & ~LCCR0_CMS) | LCCR0_Mono;
1988         } else if (!strncmp(this_opt, "active", 6)) {
1989                 inf->lccr0 = (inf->lccr0 & ~LCCR0_PAS) | LCCR0_Act;
1990         } else if (!strncmp(this_opt, "passive", 7)) {
1991                 inf->lccr0 = (inf->lccr0 & ~LCCR0_PAS) | LCCR0_Pas;
1992         } else if (!strncmp(this_opt, "single", 6)) {
1993                 inf->lccr0 = (inf->lccr0 & ~LCCR0_SDS) | LCCR0_Sngl;
1994         } else if (!strncmp(this_opt, "dual", 4)) {
1995                 inf->lccr0 = (inf->lccr0 & ~LCCR0_SDS) | LCCR0_Dual;
1996         } else if (!strncmp(this_opt, "4pix", 4)) {
1997                 inf->lccr0 = (inf->lccr0 & ~LCCR0_DPD) | LCCR0_4PixMono;
1998         } else if (!strncmp(this_opt, "8pix", 4)) {
1999                 inf->lccr0 = (inf->lccr0 & ~LCCR0_DPD) | LCCR0_8PixMono;
2000         } else {
2001                 dev_err(dev, "unknown option: %s\n", this_opt);
2002                 return -EINVAL;
2003         }
2004
2005         if (s[0] != '\0')
2006                 dev_info(dev, "override %s", s);
2007
2008         return 0;
2009 }
2010
2011 static int __devinit pxafb_parse_options(struct device *dev, char *options)
2012 {
2013         char *this_opt;
2014         int ret;
2015
2016         if (!options || !*options)
2017                 return 0;
2018
2019         dev_dbg(dev, "options are \"%s\"\n", options ? options : "null");
2020
2021         /* could be made table driven or similar?... */
2022         while ((this_opt = strsep(&options, ",")) != NULL) {
2023                 ret = parse_opt(dev, this_opt);
2024                 if (ret)
2025                         return ret;
2026         }
2027         return 0;
2028 }
2029
2030 static char g_options[256] __devinitdata = "";
2031
2032 #ifndef MODULE
2033 static int __init pxafb_setup_options(void)
2034 {
2035         char *options = NULL;
2036
2037         if (fb_get_options("pxafb", &options))
2038                 return -ENODEV;
2039
2040         if (options)
2041                 strlcpy(g_options, options, sizeof(g_options));
2042
2043         return 0;
2044 }
2045 #else
2046 #define pxafb_setup_options()           (0)
2047
2048 module_param_string(options, g_options, sizeof(g_options), 0);
2049 MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
2050 #endif
2051
2052 #else
2053 #define pxafb_parse_options(...)        (0)
2054 #define pxafb_setup_options()           (0)
2055 #endif
2056
2057 #ifdef DEBUG_VAR
2058 /* Check for various illegal bit-combinations. Currently only
2059  * a warning is given. */
2060 static void __devinit pxafb_check_options(struct device *dev,
2061                                           struct pxafb_mach_info *inf)
2062 {
2063         if (inf->lcd_conn)
2064                 return;
2065
2066         if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK)
2067                 dev_warn(dev, "machine LCCR0 setting contains "
2068                                 "illegal bits: %08x\n",
2069                         inf->lccr0 & LCCR0_INVALID_CONFIG_MASK);
2070         if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
2071                 dev_warn(dev, "machine LCCR3 setting contains "
2072                                 "illegal bits: %08x\n",
2073                         inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
2074         if (inf->lccr0 & LCCR0_DPD &&
2075             ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas ||
2076              (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl ||
2077              (inf->lccr0 & LCCR0_CMS) != LCCR0_Mono))
2078                 dev_warn(dev, "Double Pixel Data (DPD) mode is "
2079                                 "only valid in passive mono"
2080                                 " single panel mode\n");
2081         if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act &&
2082             (inf->lccr0 & LCCR0_SDS) == LCCR0_Dual)
2083                 dev_warn(dev, "Dual panel only valid in passive mode\n");
2084         if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas &&
2085              (inf->modes->upper_margin || inf->modes->lower_margin))
2086                 dev_warn(dev, "Upper and lower margins must be 0 in "
2087                                 "passive mode\n");
2088 }
2089 #else
2090 #define pxafb_check_options(...)        do {} while (0)
2091 #endif
2092
2093 static int __devinit pxafb_probe(struct platform_device *dev)
2094 {
2095         struct pxafb_info *fbi;
2096         struct pxafb_mach_info *inf;
2097         struct resource *r;
2098         int irq, ret;
2099
2100         dev_dbg(&dev->dev, "pxafb_probe\n");
2101
2102         inf = dev->dev.platform_data;
2103         ret = -ENOMEM;
2104         fbi = NULL;
2105         if (!inf)
2106                 goto failed;
2107
2108         ret = pxafb_parse_options(&dev->dev, g_options);
2109         if (ret < 0)
2110                 goto failed;
2111
2112         pxafb_check_options(&dev->dev, inf);
2113
2114         dev_dbg(&dev->dev, "got a %dx%dx%d LCD\n",
2115                         inf->modes->xres,
2116                         inf->modes->yres,
2117                         inf->modes->bpp);
2118         if (inf->modes->xres == 0 ||
2119             inf->modes->yres == 0 ||
2120             inf->modes->bpp == 0) {
2121                 dev_err(&dev->dev, "Invalid resolution or bit depth\n");
2122                 ret = -EINVAL;
2123                 goto failed;
2124         }
2125
2126         fbi = pxafb_init_fbinfo(&dev->dev);
2127         if (!fbi) {
2128                 /* only reason for pxafb_init_fbinfo to fail is kmalloc */
2129                 dev_err(&dev->dev, "Failed to initialize framebuffer device\n");
2130                 ret = -ENOMEM;
2131                 goto failed;
2132         }
2133
2134         if (cpu_is_pxa3xx() && inf->acceleration_enabled)
2135                 fbi->fb.fix.accel = FB_ACCEL_PXA3XX;
2136
2137         fbi->backlight_power = inf->pxafb_backlight_power;
2138         fbi->lcd_power = inf->pxafb_lcd_power;
2139
2140         r = platform_get_resource(dev, IORESOURCE_MEM, 0);
2141         if (r == NULL) {
2142                 dev_err(&dev->dev, "no I/O memory resource defined\n");
2143                 ret = -ENODEV;
2144                 goto failed_fbi;
2145         }
2146
2147         r = request_mem_region(r->start, resource_size(r), dev->name);
2148         if (r == NULL) {
2149                 dev_err(&dev->dev, "failed to request I/O memory\n");
2150                 ret = -EBUSY;
2151                 goto failed_fbi;
2152         }
2153
2154         fbi->mmio_base = ioremap(r->start, resource_size(r));
2155         if (fbi->mmio_base == NULL) {
2156                 dev_err(&dev->dev, "failed to map I/O memory\n");
2157                 ret = -EBUSY;
2158                 goto failed_free_res;
2159         }
2160
2161         fbi->dma_buff_size = PAGE_ALIGN(sizeof(struct pxafb_dma_buff));
2162         fbi->dma_buff = dma_alloc_coherent(fbi->dev, fbi->dma_buff_size,
2163                                 &fbi->dma_buff_phys, GFP_KERNEL);
2164         if (fbi->dma_buff == NULL) {
2165                 dev_err(&dev->dev, "failed to allocate memory for DMA\n");
2166                 ret = -ENOMEM;
2167                 goto failed_free_io;
2168         }
2169
2170         ret = pxafb_init_video_memory(fbi);
2171         if (ret) {
2172                 dev_err(&dev->dev, "Failed to allocate video RAM: %d\n", ret);
2173                 ret = -ENOMEM;
2174                 goto failed_free_dma;
2175         }
2176
2177         irq = platform_get_irq(dev, 0);
2178         if (irq < 0) {
2179                 dev_err(&dev->dev, "no IRQ defined\n");
2180                 ret = -ENODEV;
2181                 goto failed_free_mem;
2182         }
2183
2184         ret = request_irq(irq, pxafb_handle_irq, 0, "LCD", fbi);
2185         if (ret) {
2186                 dev_err(&dev->dev, "request_irq failed: %d\n", ret);
2187                 ret = -EBUSY;
2188                 goto failed_free_mem;
2189         }
2190
2191         ret = pxafb_smart_init(fbi);
2192         if (ret) {
2193                 dev_err(&dev->dev, "failed to initialize smartpanel\n");
2194                 goto failed_free_irq;
2195         }
2196
2197         /*
2198          * This makes sure that our colour bitfield
2199          * descriptors are correctly initialised.
2200          */
2201         ret = pxafb_check_var(&fbi->fb.var, &fbi->fb);
2202         if (ret) {
2203                 dev_err(&dev->dev, "failed to get suitable mode\n");
2204                 goto failed_free_irq;
2205         }
2206
2207         ret = pxafb_set_par(&fbi->fb);
2208         if (ret) {
2209                 dev_err(&dev->dev, "Failed to set parameters\n");
2210                 goto failed_free_irq;
2211         }
2212
2213         platform_set_drvdata(dev, fbi);
2214
2215         ret = register_framebuffer(&fbi->fb);
2216         if (ret < 0) {
2217                 dev_err(&dev->dev,
2218                         "Failed to register framebuffer device: %d\n", ret);
2219                 goto failed_free_cmap;
2220         }
2221
2222         pxafb_overlay_init(fbi);
2223
2224 #ifdef CONFIG_CPU_FREQ
2225         fbi->freq_transition.notifier_call = pxafb_freq_transition;
2226         fbi->freq_policy.notifier_call = pxafb_freq_policy;
2227         cpufreq_register_notifier(&fbi->freq_transition,
2228                                 CPUFREQ_TRANSITION_NOTIFIER);
2229         cpufreq_register_notifier(&fbi->freq_policy,
2230                                 CPUFREQ_POLICY_NOTIFIER);
2231 #endif
2232
2233         /*
2234          * Ok, now enable the LCD controller
2235          */
2236         set_ctrlr_state(fbi, C_ENABLE);
2237
2238         return 0;
2239
2240 failed_free_cmap:
2241         if (fbi->fb.cmap.len)
2242                 fb_dealloc_cmap(&fbi->fb.cmap);
2243 failed_free_irq:
2244         free_irq(irq, fbi);
2245 failed_free_mem:
2246         free_pages_exact(fbi->video_mem, fbi->video_mem_size);
2247 failed_free_dma:
2248         dma_free_coherent(&dev->dev, fbi->dma_buff_size,
2249                         fbi->dma_buff, fbi->dma_buff_phys);
2250 failed_free_io:
2251         iounmap(fbi->mmio_base);
2252 failed_free_res:
2253         release_mem_region(r->start, resource_size(r));
2254 failed_fbi:
2255         clk_put(fbi->clk);
2256         platform_set_drvdata(dev, NULL);
2257         kfree(fbi);
2258 failed:
2259         return ret;
2260 }
2261
2262 static int __devexit pxafb_remove(struct platform_device *dev)
2263 {
2264         struct pxafb_info *fbi = platform_get_drvdata(dev);
2265         struct resource *r;
2266         int irq;
2267         struct fb_info *info;
2268
2269         if (!fbi)
2270                 return 0;
2271
2272         info = &fbi->fb;
2273
2274         pxafb_overlay_exit(fbi);
2275         unregister_framebuffer(info);
2276
2277         pxafb_disable_controller(fbi);
2278
2279         if (fbi->fb.cmap.len)
2280                 fb_dealloc_cmap(&fbi->fb.cmap);
2281
2282         irq = platform_get_irq(dev, 0);
2283         free_irq(irq, fbi);
2284
2285         free_pages_exact(fbi->video_mem, fbi->video_mem_size);
2286
2287         dma_free_writecombine(&dev->dev, fbi->dma_buff_size,
2288                         fbi->dma_buff, fbi->dma_buff_phys);
2289
2290         iounmap(fbi->mmio_base);
2291
2292         r = platform_get_resource(dev, IORESOURCE_MEM, 0);
2293         release_mem_region(r->start, resource_size(r));
2294
2295         clk_put(fbi->clk);
2296         kfree(fbi);
2297
2298         return 0;
2299 }
2300
2301 static struct platform_driver pxafb_driver = {
2302         .probe          = pxafb_probe,
2303         .remove         = __devexit_p(pxafb_remove),
2304         .driver         = {
2305                 .owner  = THIS_MODULE,
2306                 .name   = "pxa2xx-fb",
2307 #ifdef CONFIG_PM
2308                 .pm     = &pxafb_pm_ops,
2309 #endif
2310         },
2311 };
2312
2313 static int __init pxafb_init(void)
2314 {
2315         if (pxafb_setup_options())
2316                 return -EINVAL;
2317
2318         return platform_driver_register(&pxafb_driver);
2319 }
2320
2321 static void __exit pxafb_exit(void)
2322 {
2323         platform_driver_unregister(&pxafb_driver);
2324 }
2325
2326 module_init(pxafb_init);
2327 module_exit(pxafb_exit);
2328
2329 MODULE_DESCRIPTION("loadable framebuffer driver for PXA");
2330 MODULE_LICENSE("GPL");