drivers/video/atmel_lcdfb.c

   1 /*
   2  *  Driver for AT91/AT32 LCD Controller
   3  *
   4  *  Copyright (C) 2007 Atmel Corporation
   5  *
   6  * This file is subject to the terms and conditions of the GNU General Public
   7  * License.  See the file COPYING in the main directory of this archive for
   8  * more details.
   9  */
  10
  11 #include <linux/kernel.h>
  12 #include <linux/platform_device.h>
  13 #include <linux/dma-mapping.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/clk.h>
  16 #include <linux/fb.h>
  17 #include <linux/init.h>
  18 #include <linux/delay.h>
  19 #include <linux/backlight.h>
  20 #include <linux/gfp.h>
  21
  22 #include <mach/board.h>
  23 #include <mach/cpu.h>
  24 #include <asm/gpio.h>
  25
  26 #include <video/atmel_lcdc.h>
  27
  28 #define lcdc_readl(sinfo, reg)          __raw_readl((sinfo)->mmio+(reg))
  29 #define lcdc_writel(sinfo, reg, val)    __raw_writel((val), (sinfo)->mmio+(reg))
  30
  31 /* configurable parameters */
  32 #define ATMEL_LCDC_CVAL_DEFAULT         0xc8
  33 #define ATMEL_LCDC_DMA_BURST_LEN        8       /* words */
  34 #define ATMEL_LCDC_FIFO_SIZE            512     /* words */
  35
  36 #if defined(CONFIG_ARCH_AT91)
  37 #define ATMEL_LCDFB_FBINFO_DEFAULT      (FBINFO_DEFAULT \
  38                                          | FBINFO_PARTIAL_PAN_OK \
  39                                          | FBINFO_HWACCEL_YPAN)
  40
  41 static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
  42                                         struct fb_var_screeninfo *var,
  43                                         struct fb_info *info)
  44 {
  45
  46 }
  47 #elif defined(CONFIG_AVR32)
  48 #define ATMEL_LCDFB_FBINFO_DEFAULT      (FBINFO_DEFAULT \
  49                                         | FBINFO_PARTIAL_PAN_OK \
  50                                         | FBINFO_HWACCEL_XPAN \
  51                                         | FBINFO_HWACCEL_YPAN)
  52
  53 static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
  54                                      struct fb_var_screeninfo *var,
  55                                      struct fb_info *info)
  56 {
  57         u32 dma2dcfg;
  58         u32 pixeloff;
  59
  60         pixeloff = (var->xoffset * info->var.bits_per_pixel) & 0x1f;
  61
  62         dma2dcfg = (info->var.xres_virtual - info->var.xres)
  63                  * info->var.bits_per_pixel / 8;
  64         dma2dcfg |= pixeloff << ATMEL_LCDC_PIXELOFF_OFFSET;
  65         lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg);
  66
  67         /* Update configuration */
  68         lcdc_writel(sinfo, ATMEL_LCDC_DMACON,
  69                     lcdc_readl(sinfo, ATMEL_LCDC_DMACON)
  70                     | ATMEL_LCDC_DMAUPDT);
  71 }
  72 #endif
  73
  74 static u32 contrast_ctr = ATMEL_LCDC_PS_DIV8
  75                 | ATMEL_LCDC_POL_POSITIVE
  76                 | ATMEL_LCDC_ENA_PWMENABLE;
  77
  78 #ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
  79
  80 /* some bl->props field just changed */
  81 static int atmel_bl_update_status(struct backlight_device *bl)
  82 {
  83         struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
  84         int                     power = sinfo->bl_power;
  85         int                     brightness = bl->props.brightness;
  86
  87         /* REVISIT there may be a meaningful difference between
  88          * fb_blank and power ... there seem to be some cases
  89          * this doesn't handle correctly.
  90          */
  91         if (bl->props.fb_blank != sinfo->bl_power)
  92                 power = bl->props.fb_blank;
  93         else if (bl->props.power != sinfo->bl_power)
  94                 power = bl->props.power;
  95
  96         if (brightness < 0 && power == FB_BLANK_UNBLANK)
  97                 brightness = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
  98         else if (power != FB_BLANK_UNBLANK)
  99                 brightness = 0;
 100
 101         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, brightness);
 102         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR,
 103                         brightness ? contrast_ctr : 0);
 104
 105         bl->props.fb_blank = bl->props.power = sinfo->bl_power = power;
 106
 107         return 0;
 108 }
 109
 110 static int atmel_bl_get_brightness(struct backlight_device *bl)
 111 {
 112         struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
 113
 114         return lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
 115 }
 116
 117 static const struct backlight_ops atmel_lcdc_bl_ops = {
 118         .update_status = atmel_bl_update_status,
 119         .get_brightness = atmel_bl_get_brightness,
 120 };
 121
 122 static void init_backlight(struct atmel_lcdfb_info *sinfo)
 123 {
 124         struct backlight_properties props;
 125         struct backlight_device *bl;
 126
 127         sinfo->bl_power = FB_BLANK_UNBLANK;
 128
 129         if (sinfo->backlight)
 130                 return;
 131
 132         memset(&props, 0, sizeof(struct backlight_properties));
 133         props.type = BACKLIGHT_RAW;
 134         props.max_brightness = 0xff;
 135         bl = backlight_device_register("backlight", &sinfo->pdev->dev, sinfo,
 136                                        &atmel_lcdc_bl_ops, &props);
 137         if (IS_ERR(bl)) {
 138                 dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n",
 139                                 PTR_ERR(bl));
 140                 return;
 141         }
 142         sinfo->backlight = bl;
 143
 144         bl->props.power = FB_BLANK_UNBLANK;
 145         bl->props.fb_blank = FB_BLANK_UNBLANK;
 146         bl->props.brightness = atmel_bl_get_brightness(bl);
 147 }
 148
 149 static void exit_backlight(struct atmel_lcdfb_info *sinfo)
 150 {
 151         if (sinfo->backlight)
 152                 backlight_device_unregister(sinfo->backlight);
 153 }
 154
 155 #else
 156
 157 static void init_backlight(struct atmel_lcdfb_info *sinfo)
 158 {
 159         dev_warn(&sinfo->pdev->dev, "backlight control is not available\n");
 160 }
 161
 162 static void exit_backlight(struct atmel_lcdfb_info *sinfo)
 163 {
 164 }
 165
 166 #endif
 167
 168 static void init_contrast(struct atmel_lcdfb_info *sinfo)
 169 {
 170         /* contrast pwm can be 'inverted' */
 171         if (sinfo->lcdcon_pol_negative)
 172                         contrast_ctr &= ~(ATMEL_LCDC_POL_POSITIVE);
 173
 174         /* have some default contrast/backlight settings */
 175         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
 176         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
 177
 178         if (sinfo->lcdcon_is_backlight)
 179                 init_backlight(sinfo);
 180 }
 181
 182
 183 static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
 184         .type           = FB_TYPE_PACKED_PIXELS,
 185         .visual         = FB_VISUAL_TRUECOLOR,
 186         .xpanstep       = 0,
 187         .ypanstep       = 1,
 188         .ywrapstep      = 0,
 189         .accel          = FB_ACCEL_NONE,
 190 };
 191
 192 static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
 193 {
 194         unsigned long value;
 195
 196         if (!(cpu_is_at91sam9261() || cpu_is_at91sam9g10()
 197                 || cpu_is_at32ap7000()))
 198                 return xres;
 199
 200         value = xres;
 201         if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) {
 202                 /* STN display */
 203                 if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR) {
 204                         value *= 3;
 205                 }
 206                 if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4
 207                    || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8
 208                       && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL ))
 209                         value = DIV_ROUND_UP(value, 4);
 210                 else
 211                         value = DIV_ROUND_UP(value, 8);
 212         }
 213
 214         return value;
 215 }
 216
 217 static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo)
 218 {
 219         /* Turn off the LCD controller and the DMA controller */
 220         lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
 221                         sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
 222
 223         /* Wait for the LCDC core to become idle */
 224         while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
 225                 msleep(10);
 226
 227         lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
 228 }
 229
 230 static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo)
 231 {
 232         atmel_lcdfb_stop_nowait(sinfo);
 233
 234         /* Wait for DMA engine to become idle... */
 235         while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
 236                 msleep(10);
 237 }
 238
 239 static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
 240 {
 241         lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
 242         lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
 243                 (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
 244                 | ATMEL_LCDC_PWR);
 245 }
 246
 247 static void atmel_lcdfb_update_dma(struct fb_info *info,
 248                                struct fb_var_screeninfo *var)
 249 {
 250         struct atmel_lcdfb_info *sinfo = info->par;
 251         struct fb_fix_screeninfo *fix = &info->fix;
 252         unsigned long dma_addr;
 253
 254         dma_addr = (fix->smem_start + var->yoffset * fix->line_length
 255                     + var->xoffset * info->var.bits_per_pixel / 8);
 256
 257         dma_addr &= ~3UL;
 258
 259         /* Set framebuffer DMA base address and pixel offset */
 260         lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
 261
 262         atmel_lcdfb_update_dma2d(sinfo, var, info);
 263 }
 264
 265 static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo)
 266 {
 267         struct fb_info *info = sinfo->info;
 268
 269         dma_free_writecombine(info->device, info->fix.smem_len,
 270                                 info->screen_base, info->fix.smem_start);
 271 }
 272
 273 /**
 274  *      atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory
 275  *      @sinfo: the frame buffer to allocate memory for
 276  *
 277  *      This function is called only from the atmel_lcdfb_probe()
 278  *      so no locking by fb_info->mm_lock around smem_len setting is needed.
 279  */
 280 static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
 281 {
 282         struct fb_info *info = sinfo->info;
 283         struct fb_var_screeninfo *var = &info->var;
 284         unsigned int smem_len;
 285
 286         smem_len = (var->xres_virtual * var->yres_virtual
 287                     * ((var->bits_per_pixel + 7) / 8));
 288         info->fix.smem_len = max(smem_len, sinfo->smem_len);
 289
 290         info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
 291                                         (dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
 292
 293         if (!info->screen_base) {
 294                 return -ENOMEM;
 295         }
 296
 297         memset(info->screen_base, 0, info->fix.smem_len);
 298
 299         return 0;
 300 }
 301
 302 static const struct fb_videomode *atmel_lcdfb_choose_mode(struct fb_var_screeninfo *var,
 303                                                      struct fb_info *info)
 304 {
 305         struct fb_videomode varfbmode;
 306         const struct fb_videomode *fbmode = NULL;
 307
 308         fb_var_to_videomode(&varfbmode, var);
 309         fbmode = fb_find_nearest_mode(&varfbmode, &info->modelist);
 310         if (fbmode)
 311                 fb_videomode_to_var(var, fbmode);
 312         return fbmode;
 313 }
 314
 315
 316 /**
 317  *      atmel_lcdfb_check_var - Validates a var passed in.
 318  *      @var: frame buffer variable screen structure
 319  *      @info: frame buffer structure that represents a single frame buffer
 320  *
 321  *      Checks to see if the hardware supports the state requested by
 322  *      var passed in. This function does not alter the hardware
 323  *      state!!!  This means the data stored in struct fb_info and
 324  *      struct atmel_lcdfb_info do not change. This includes the var
 325  *      inside of struct fb_info.  Do NOT change these. This function
 326  *      can be called on its own if we intent to only test a mode and
 327  *      not actually set it. The stuff in modedb.c is a example of
 328  *      this. If the var passed in is slightly off by what the
 329  *      hardware can support then we alter the var PASSED in to what
 330  *      we can do. If the hardware doesn't support mode change a
 331  *      -EINVAL will be returned by the upper layers. You don't need
 332  *      to implement this function then. If you hardware doesn't
 333  *      support changing the resolution then this function is not
 334  *      needed. In this case the driver would just provide a var that
 335  *      represents the static state the screen is in.
 336  *
 337  *      Returns negative errno on error, or zero on success.
 338  */
 339 static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
 340                              struct fb_info *info)
 341 {
 342         struct device *dev = info->device;
 343         struct atmel_lcdfb_info *sinfo = info->par;
 344         unsigned long clk_value_khz;
 345
 346         clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
 347
 348         dev_dbg(dev, "%s:\n", __func__);
 349
 350         if (!(var->pixclock && var->bits_per_pixel)) {
 351                 /* choose a suitable mode if possible */
 352                 if (!atmel_lcdfb_choose_mode(var, info)) {
 353                         dev_err(dev, "needed value not specified\n");
 354                         return -EINVAL;
 355                 }
 356         }
 357
 358         dev_dbg(dev, "  resolution: %ux%u\n", var->xres, var->yres);
 359         dev_dbg(dev, "  pixclk:     %lu KHz\n", PICOS2KHZ(var->pixclock));
 360         dev_dbg(dev, "  bpp:        %u\n", var->bits_per_pixel);
 361         dev_dbg(dev, "  clk:        %lu KHz\n", clk_value_khz);
 362
 363         if (PICOS2KHZ(var->pixclock) > clk_value_khz) {
 364                 dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
 365                 return -EINVAL;
 366         }
 367
 368         /* Do not allow to have real resoulution larger than virtual */
 369         if (var->xres > var->xres_virtual)
 370                 var->xres_virtual = var->xres;
 371
 372         if (var->yres > var->yres_virtual)
 373                 var->yres_virtual = var->yres;
 374
 375         /* Force same alignment for each line */
 376         var->xres = (var->xres + 3) & ~3UL;
 377         var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
 378
 379         var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
 380         var->transp.msb_right = 0;
 381         var->transp.offset = var->transp.length = 0;
 382         var->xoffset = var->yoffset = 0;
 383
 384         if (info->fix.smem_len) {
 385                 unsigned int smem_len = (var->xres_virtual * var->yres_virtual
 386                                          * ((var->bits_per_pixel + 7) / 8));
 387                 if (smem_len > info->fix.smem_len)
 388                         return -EINVAL;
 389         }
 390
 391         /* Saturate vertical and horizontal timings at maximum values */
 392         var->vsync_len = min_t(u32, var->vsync_len,
 393                         (ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1);
 394         var->upper_margin = min_t(u32, var->upper_margin,
 395                         ATMEL_LCDC_VBP >> ATMEL_LCDC_VBP_OFFSET);
 396         var->lower_margin = min_t(u32, var->lower_margin,
 397                         ATMEL_LCDC_VFP);
 398         var->right_margin = min_t(u32, var->right_margin,
 399                         (ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1);
 400         var->hsync_len = min_t(u32, var->hsync_len,
 401                         (ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1);
 402         var->left_margin = min_t(u32, var->left_margin,
 403                         ATMEL_LCDC_HBP + 1);
 404
 405         /* Some parameters can't be zero */
 406         var->vsync_len = max_t(u32, var->vsync_len, 1);
 407         var->right_margin = max_t(u32, var->right_margin, 1);
 408         var->hsync_len = max_t(u32, var->hsync_len, 1);
 409         var->left_margin = max_t(u32, var->left_margin, 1);
 410
 411         switch (var->bits_per_pixel) {
 412         case 1:
 413         case 2:
 414         case 4:
 415         case 8:
 416                 var->red.offset = var->green.offset = var->blue.offset = 0;
 417                 var->red.length = var->green.length = var->blue.length
 418                         = var->bits_per_pixel;
 419                 break;
 420         case 15:
 421         case 16:
 422                 if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
 423                         /* RGB:565 mode */
 424                         var->red.offset = 11;
 425                         var->blue.offset = 0;
 426                         var->green.length = 6;
 427                 } else if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB555) {
 428                         var->red.offset = 10;
 429                         var->blue.offset = 0;
 430                         var->green.length = 5;
 431                 } else {
 432                         /* BGR:555 mode */
 433                         var->red.offset = 0;
 434                         var->blue.offset = 10;
 435                         var->green.length = 5;
 436                 }
 437                 var->green.offset = 5;
 438                 var->red.length = var->blue.length = 5;
 439                 break;
 440         case 32:
 441                 var->transp.offset = 24;
 442                 var->transp.length = 8;
 443                 /* fall through */
 444         case 24:
 445                 if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
 446                         /* RGB:888 mode */
 447                         var->red.offset = 16;
 448                         var->blue.offset = 0;
 449                 } else {
 450                         /* BGR:888 mode */
 451                         var->red.offset = 0;
 452                         var->blue.offset = 16;
 453                 }
 454                 var->green.offset = 8;
 455                 var->red.length = var->green.length = var->blue.length = 8;
 456                 break;
 457         default:
 458                 dev_err(dev, "color depth %d not supported\n",
 459                                         var->bits_per_pixel);
 460                 return -EINVAL;
 461         }
 462
 463         return 0;
 464 }
 465
 466 /*
 467  * LCD reset sequence
 468  */
 469 static void atmel_lcdfb_reset(struct atmel_lcdfb_info *sinfo)
 470 {
 471         might_sleep();
 472
 473         atmel_lcdfb_stop(sinfo);
 474         atmel_lcdfb_start(sinfo);
 475 }
 476
 477 /**
 478  *      atmel_lcdfb_set_par - Alters the hardware state.
 479  *      @info: frame buffer structure that represents a single frame buffer
 480  *
 481  *      Using the fb_var_screeninfo in fb_info we set the resolution
 482  *      of the this particular framebuffer. This function alters the
 483  *      par AND the fb_fix_screeninfo stored in fb_info. It doesn't
 484  *      not alter var in fb_info since we are using that data. This
 485  *      means we depend on the data in var inside fb_info to be
 486  *      supported by the hardware.  atmel_lcdfb_check_var is always called
 487  *      before atmel_lcdfb_set_par to ensure this.  Again if you can't
 488  *      change the resolution you don't need this function.
 489  *
 490  */
 491 static int atmel_lcdfb_set_par(struct fb_info *info)
 492 {
 493         struct atmel_lcdfb_info *sinfo = info->par;
 494         unsigned long hozval_linesz;
 495         unsigned long value;
 496         unsigned long clk_value_khz;
 497         unsigned long bits_per_line;
 498         unsigned long pix_factor = 2;
 499
 500         might_sleep();
 501
 502         dev_dbg(info->device, "%s:\n", __func__);
 503         dev_dbg(info->device, "  * resolution: %ux%u (%ux%u virtual)\n",
 504                  info->var.xres, info->var.yres,
 505                  info->var.xres_virtual, info->var.yres_virtual);
 506
 507         atmel_lcdfb_stop_nowait(sinfo);
 508
 509         if (info->var.bits_per_pixel == 1)
 510                 info->fix.visual = FB_VISUAL_MONO01;
 511         else if (info->var.bits_per_pixel <= 8)
 512                 info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
 513         else
 514                 info->fix.visual = FB_VISUAL_TRUECOLOR;
 515
 516         bits_per_line = info->var.xres_virtual * info->var.bits_per_pixel;
 517         info->fix.line_length = DIV_ROUND_UP(bits_per_line, 8);
 518
 519         /* Re-initialize the DMA engine... */
 520         dev_dbg(info->device, "  * update DMA engine\n");
 521         atmel_lcdfb_update_dma(info, &info->var);
 522
 523         /* ...set frame size and burst length = 8 words (?) */
 524         value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32;
 525         value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
 526         lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
 527
 528         /* Now, the LCDC core... */
 529
 530         /* Set pixel clock */
 531         if (cpu_is_at91sam9g45() && !cpu_is_at91sam9g45es())
 532                 pix_factor = 1;
 533
 534         clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
 535
 536         value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock));
 537
 538         if (value < pix_factor) {
 539                 dev_notice(info->device, "Bypassing pixel clock divider\n");
 540                 lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
 541         } else {
 542                 value = (value / pix_factor) - 1;
 543                 dev_dbg(info->device, "  * programming CLKVAL = 0x%08lx\n",
 544                                 value);
 545                 lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1,
 546                                 value << ATMEL_LCDC_CLKVAL_OFFSET);
 547                 info->var.pixclock =
 548                         KHZ2PICOS(clk_value_khz / (pix_factor * (value + 1)));
 549                 dev_dbg(info->device, "  updated pixclk:     %lu KHz\n",
 550                                         PICOS2KHZ(info->var.pixclock));
 551         }
 552
 553
 554         /* Initialize control register 2 */
 555         value = sinfo->default_lcdcon2;
 556
 557         if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
 558                 value |= ATMEL_LCDC_INVLINE_INVERTED;
 559         if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
 560                 value |= ATMEL_LCDC_INVFRAME_INVERTED;
 561
 562         switch (info->var.bits_per_pixel) {
 563                 case 1: value |= ATMEL_LCDC_PIXELSIZE_1; break;
 564                 case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break;
 565                 case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break;
 566                 case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break;
 567                 case 15: /* fall through */
 568                 case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break;
 569                 case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break;
 570                 case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break;
 571                 default: BUG(); break;
 572         }
 573         dev_dbg(info->device, "  * LCDCON2 = %08lx\n", value);
 574         lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value);
 575
 576         /* Vertical timing */
 577         value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
 578         value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET;
 579         value |= info->var.lower_margin;
 580         dev_dbg(info->device, "  * LCDTIM1 = %08lx\n", value);
 581         lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
 582
 583         /* Horizontal timing */
 584         value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
 585         value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
 586         value |= (info->var.left_margin - 1);
 587         dev_dbg(info->device, "  * LCDTIM2 = %08lx\n", value);
 588         lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
 589
 590         /* Horizontal value (aka line size) */
 591         hozval_linesz = compute_hozval(info->var.xres,
 592                                         lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2));
 593
 594         /* Display size */
 595         value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
 596         value |= info->var.yres - 1;
 597         dev_dbg(info->device, "  * LCDFRMCFG = %08lx\n", value);
 598         lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
 599
 600         /* FIFO Threshold: Use formula from data sheet */
 601         value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
 602         lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value);
 603
 604         /* Toggle LCD_MODE every frame */
 605         lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0);
 606
 607         /* Disable all interrupts */
 608         lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
 609         /* Enable FIFO & DMA errors */
 610         lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
 611
 612         /* ...wait for DMA engine to become idle... */
 613         while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
 614                 msleep(10);
 615
 616         atmel_lcdfb_start(sinfo);
 617
 618         dev_dbg(info->device, "  * DONE\n");
 619
 620         return 0;
 621 }
 622
 623 static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitfield *bf)
 624 {
 625         chan &= 0xffff;
 626         chan >>= 16 - bf->length;
 627         return chan << bf->offset;
 628 }
 629
 630 /**
 631  *      atmel_lcdfb_setcolreg - Optional function. Sets a color register.
 632  *      @regno: Which register in the CLUT we are programming
 633  *      @red: The red value which can be up to 16 bits wide
 634  *      @green: The green value which can be up to 16 bits wide
 635  *      @blue:  The blue value which can be up to 16 bits wide.
 636  *      @transp: If supported the alpha value which can be up to 16 bits wide.
 637  *      @info: frame buffer info structure
 638  *
 639  *      Set a single color register. The values supplied have a 16 bit
 640  *      magnitude which needs to be scaled in this function for the hardware.
 641  *      Things to take into consideration are how many color registers, if
 642  *      any, are supported with the current color visual. With truecolor mode
 643  *      no color palettes are supported. Here a pseudo palette is created
 644  *      which we store the value in pseudo_palette in struct fb_info. For
 645  *      pseudocolor mode we have a limited color palette. To deal with this
 646  *      we can program what color is displayed for a particular pixel value.
 647  *      DirectColor is similar in that we can program each color field. If
 648  *      we have a static colormap we don't need to implement this function.
 649  *
 650  *      Returns negative errno on error, or zero on success. In an
 651  *      ideal world, this would have been the case, but as it turns
 652  *      out, the other drivers return 1 on failure, so that's what
 653  *      we're going to do.
 654  */
 655 static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
 656                              unsigned int green, unsigned int blue,
 657                              unsigned int transp, struct fb_info *info)
 658 {
 659         struct atmel_lcdfb_info *sinfo = info->par;
 660         unsigned int val;
 661         u32 *pal;
 662         int ret = 1;
 663
 664         if (info->var.grayscale)
 665                 red = green = blue = (19595 * red + 38470 * green
 666                                       + 7471 * blue) >> 16;
 667
 668         switch (info->fix.visual) {
 669         case FB_VISUAL_TRUECOLOR:
 670                 if (regno < 16) {
 671                         pal = info->pseudo_palette;
 672
 673                         val  = chan_to_field(red, &info->var.red);
 674                         val |= chan_to_field(green, &info->var.green);
 675                         val |= chan_to_field(blue, &info->var.blue);
 676
 677                         pal[regno] = val;
 678                         ret = 0;
 679                 }
 680                 break;
 681
 682         case FB_VISUAL_PSEUDOCOLOR:
 683                 if (regno < 256) {
 684                         val  = ((red   >> 11) & 0x001f);
 685                         val |= ((green >>  6) & 0x03e0);
 686                         val |= ((blue  >>  1) & 0x7c00);
 687
 688                         /*
 689                          * TODO: intensity bit. Maybe something like
 690                          *   ~(red[10] ^ green[10] ^ blue[10]) & 1
 691                          */
 692
 693                         lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
 694                         ret = 0;
 695                 }
 696                 break;
 697
 698         case FB_VISUAL_MONO01:
 699                 if (regno < 2) {
 700                         val = (regno == 0) ? 0x00 : 0x1F;
 701                         lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
 702                         ret = 0;
 703                 }
 704                 break;
 705
 706         }
 707
 708         return ret;
 709 }
 710
 711 static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
 712                                struct fb_info *info)
 713 {
 714         dev_dbg(info->device, "%s\n", __func__);
 715
 716         atmel_lcdfb_update_dma(info, var);
 717
 718         return 0;
 719 }
 720
 721 static int atmel_lcdfb_blank(int blank_mode, struct fb_info *info)
 722 {
 723         struct atmel_lcdfb_info *sinfo = info->par;
 724
 725         switch (blank_mode) {
 726         case FB_BLANK_UNBLANK:
 727         case FB_BLANK_NORMAL:
 728                 atmel_lcdfb_start(sinfo);
 729                 break;
 730         case FB_BLANK_VSYNC_SUSPEND:
 731         case FB_BLANK_HSYNC_SUSPEND:
 732                 break;
 733         case FB_BLANK_POWERDOWN:
 734                 atmel_lcdfb_stop(sinfo);
 735                 break;
 736         default:
 737                 return -EINVAL;
 738         }
 739
 740         /* let fbcon do a soft blank for us */
 741         return ((blank_mode == FB_BLANK_NORMAL) ? 1 : 0);
 742 }
 743
 744 static struct fb_ops atmel_lcdfb_ops = {
 745         .owner          = THIS_MODULE,
 746         .fb_check_var   = atmel_lcdfb_check_var,
 747         .fb_set_par     = atmel_lcdfb_set_par,
 748         .fb_setcolreg   = atmel_lcdfb_setcolreg,
 749         .fb_blank       = atmel_lcdfb_blank,
 750         .fb_pan_display = atmel_lcdfb_pan_display,
 751         .fb_fillrect    = cfb_fillrect,
 752         .fb_copyarea    = cfb_copyarea,
 753         .fb_imageblit   = cfb_imageblit,
 754 };
 755
 756 static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id)
 757 {
 758         struct fb_info *info = dev_id;
 759         struct atmel_lcdfb_info *sinfo = info->par;
 760         u32 status;
 761
 762         status = lcdc_readl(sinfo, ATMEL_LCDC_ISR);
 763         if (status & ATMEL_LCDC_UFLWI) {
 764                 dev_warn(info->device, "FIFO underflow %#x\n", status);
 765                 /* reset DMA and FIFO to avoid screen shifting */
 766                 schedule_work(&sinfo->task);
 767         }
 768         lcdc_writel(sinfo, ATMEL_LCDC_ICR, status);
 769         return IRQ_HANDLED;
 770 }
 771
 772 /*
 773  * LCD controller task (to reset the LCD)
 774  */
 775 static void atmel_lcdfb_task(struct work_struct *work)
 776 {
 777         struct atmel_lcdfb_info *sinfo =
 778                 container_of(work, struct atmel_lcdfb_info, task);
 779
 780         atmel_lcdfb_reset(sinfo);
 781 }
 782
 783 static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
 784 {
 785         struct fb_info *info = sinfo->info;
 786         int ret = 0;
 787
 788         info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
 789
 790         dev_info(info->device,
 791                "%luKiB frame buffer at %08lx (mapped at %p)\n",
 792                (unsigned long)info->fix.smem_len / 1024,
 793                (unsigned long)info->fix.smem_start,
 794                info->screen_base);
 795
 796         /* Allocate colormap */
 797         ret = fb_alloc_cmap(&info->cmap, 256, 0);
 798         if (ret < 0)
 799                 dev_err(info->device, "Alloc color map failed\n");
 800
 801         return ret;
 802 }
 803
 804 static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
 805 {
 806         if (sinfo->bus_clk)
 807                 clk_enable(sinfo->bus_clk);
 808         clk_enable(sinfo->lcdc_clk);
 809 }
 810
 811 static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
 812 {
 813         if (sinfo->bus_clk)
 814                 clk_disable(sinfo->bus_clk);
 815         clk_disable(sinfo->lcdc_clk);
 816 }
 817
 818
 819 static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 820 {
 821         struct device *dev = &pdev->dev;
 822         struct fb_info *info;
 823         struct atmel_lcdfb_info *sinfo;
 824         struct atmel_lcdfb_info *pdata_sinfo;
 825         struct fb_videomode fbmode;
 826         struct resource *regs = NULL;
 827         struct resource *map = NULL;
 828         int ret;
 829
 830         dev_dbg(dev, "%s BEGIN\n", __func__);
 831
 832         ret = -ENOMEM;
 833         info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev);
 834         if (!info) {
 835                 dev_err(dev, "cannot allocate memory\n");
 836                 goto out;
 837         }
 838
 839         sinfo = info->par;
 840
 841         if (dev->platform_data) {
 842                 pdata_sinfo = (struct atmel_lcdfb_info *)dev->platform_data;
 843                 sinfo->default_bpp = pdata_sinfo->default_bpp;
 844                 sinfo->default_dmacon = pdata_sinfo->default_dmacon;
 845                 sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2;
 846                 sinfo->default_monspecs = pdata_sinfo->default_monspecs;
 847                 sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
 848                 sinfo->guard_time = pdata_sinfo->guard_time;
 849                 sinfo->smem_len = pdata_sinfo->smem_len;
 850                 sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
 851                 sinfo->lcdcon_pol_negative = pdata_sinfo->lcdcon_pol_negative;
 852                 sinfo->lcd_wiring_mode = pdata_sinfo->lcd_wiring_mode;
 853         } else {
 854                 dev_err(dev, "cannot get default configuration\n");
 855                 goto free_info;
 856         }
 857         sinfo->info = info;
 858         sinfo->pdev = pdev;
 859
 860         strcpy(info->fix.id, sinfo->pdev->name);
 861         info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
 862         info->pseudo_palette = sinfo->pseudo_palette;
 863         info->fbops = &atmel_lcdfb_ops;
 864
 865         memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
 866         info->fix = atmel_lcdfb_fix;
 867
 868         /* Enable LCDC Clocks */
 869         if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()
 870          || cpu_is_at32ap7000()) {
 871                 sinfo->bus_clk = clk_get(dev, "hck1");
 872                 if (IS_ERR(sinfo->bus_clk)) {
 873                         ret = PTR_ERR(sinfo->bus_clk);
 874                         goto free_info;
 875                 }
 876         }
 877         sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
 878         if (IS_ERR(sinfo->lcdc_clk)) {
 879                 ret = PTR_ERR(sinfo->lcdc_clk);
 880                 goto put_bus_clk;
 881         }
 882         atmel_lcdfb_start_clock(sinfo);
 883
 884         ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
 885                         info->monspecs.modedb_len, info->monspecs.modedb,
 886                         sinfo->default_bpp);
 887         if (!ret) {
 888                 dev_err(dev, "no suitable video mode found\n");
 889                 goto stop_clk;
 890         }
 891
 892
 893         regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 894         if (!regs) {
 895                 dev_err(dev, "resources unusable\n");
 896                 ret = -ENXIO;
 897                 goto stop_clk;
 898         }
 899
 900         sinfo->irq_base = platform_get_irq(pdev, 0);
 901         if (sinfo->irq_base < 0) {
 902                 dev_err(dev, "unable to get irq\n");
 903                 ret = sinfo->irq_base;
 904                 goto stop_clk;
 905         }
 906
 907         /* Initialize video memory */
 908         map = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 909         if (map) {
 910                 /* use a pre-allocated memory buffer */
 911                 info->fix.smem_start = map->start;
 912                 info->fix.smem_len = resource_size(map);
 913                 if (!request_mem_region(info->fix.smem_start,
 914                                         info->fix.smem_len, pdev->name)) {
 915                         ret = -EBUSY;
 916                         goto stop_clk;
 917                 }
 918
 919                 info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
 920                 if (!info->screen_base)
 921                         goto release_intmem;
 922
 923                 /*
 924                  * Don't clear the framebuffer -- someone may have set
 925                  * up a splash image.
 926                  */
 927         } else {
 928                 /* alocate memory buffer */
 929                 ret = atmel_lcdfb_alloc_video_memory(sinfo);
 930                 if (ret < 0) {
 931                         dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
 932                         goto stop_clk;
 933                 }
 934         }
 935
 936         /* LCDC registers */
 937         info->fix.mmio_start = regs->start;
 938         info->fix.mmio_len = resource_size(regs);
 939
 940         if (!request_mem_region(info->fix.mmio_start,
 941                                 info->fix.mmio_len, pdev->name)) {
 942                 ret = -EBUSY;
 943                 goto free_fb;
 944         }
 945
 946         sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
 947         if (!sinfo->mmio) {
 948                 dev_err(dev, "cannot map LCDC registers\n");
 949                 goto release_mem;
 950         }
 951
 952         /* Initialize PWM for contrast or backlight ("off") */
 953         init_contrast(sinfo);
 954
 955         /* interrupt */
 956         ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
 957         if (ret) {
 958                 dev_err(dev, "request_irq failed: %d\n", ret);
 959                 goto unmap_mmio;
 960         }
 961
 962         /* Some operations on the LCDC might sleep and
 963          * require a preemptible task context */
 964         INIT_WORK(&sinfo->task, atmel_lcdfb_task);
 965
 966         ret = atmel_lcdfb_init_fbinfo(sinfo);
 967         if (ret < 0) {
 968                 dev_err(dev, "init fbinfo failed: %d\n", ret);
 969                 goto unregister_irqs;
 970         }
 971
 972         /*
 973          * This makes sure that our colour bitfield
 974          * descriptors are correctly initialised.
 975          */
 976         atmel_lcdfb_check_var(&info->var, info);
 977
 978         ret = fb_set_var(info, &info->var);
 979         if (ret) {
 980                 dev_warn(dev, "unable to set display parameters\n");
 981                 goto free_cmap;
 982         }
 983
 984         dev_set_drvdata(dev, info);
 985
 986         /*
 987          * Tell the world that we're ready to go
 988          */
 989         ret = register_framebuffer(info);
 990         if (ret < 0) {
 991                 dev_err(dev, "failed to register framebuffer device: %d\n", ret);
 992                 goto reset_drvdata;
 993         }
 994
 995         /* add selected videomode to modelist */
 996         fb_var_to_videomode(&fbmode, &info->var);
 997         fb_add_videomode(&fbmode, &info->modelist);
 998
 999         /* Power up the LCDC screen */
1000         if (sinfo->atmel_lcdfb_power_control)
1001                 sinfo->atmel_lcdfb_power_control(1);
1002
1003         dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %d\n",
1004                        info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
1005
1006         return 0;
1007
1008 reset_drvdata:
1009         dev_set_drvdata(dev, NULL);
1010 free_cmap:
1011         fb_dealloc_cmap(&info->cmap);
1012 unregister_irqs:
1013         cancel_work_sync(&sinfo->task);
1014         free_irq(sinfo->irq_base, info);
1015 unmap_mmio:
1016         exit_backlight(sinfo);
1017         iounmap(sinfo->mmio);
1018 release_mem:
1019         release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
1020 free_fb:
1021         if (map)
1022                 iounmap(info->screen_base);
1023         else
1024                 atmel_lcdfb_free_video_memory(sinfo);
1025
1026 release_intmem:
1027         if (map)
1028                 release_mem_region(info->fix.smem_start, info->fix.smem_len);
1029 stop_clk:
1030         atmel_lcdfb_stop_clock(sinfo);
1031         clk_put(sinfo->lcdc_clk);
1032 put_bus_clk:
1033         if (sinfo->bus_clk)
1034                 clk_put(sinfo->bus_clk);
1035 free_info:
1036         framebuffer_release(info);
1037 out:
1038         dev_dbg(dev, "%s FAILED\n", __func__);
1039         return ret;
1040 }
1041
1042 static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
1043 {
1044         struct device *dev = &pdev->dev;
1045         struct fb_info *info = dev_get_drvdata(dev);
1046         struct atmel_lcdfb_info *sinfo;
1047
1048         if (!info || !info->par)
1049                 return 0;
1050         sinfo = info->par;
1051
1052         cancel_work_sync(&sinfo->task);
1053         exit_backlight(sinfo);
1054         if (sinfo->atmel_lcdfb_power_control)
1055                 sinfo->atmel_lcdfb_power_control(0);
1056         unregister_framebuffer(info);
1057         atmel_lcdfb_stop_clock(sinfo);
1058         clk_put(sinfo->lcdc_clk);
1059         if (sinfo->bus_clk)
1060                 clk_put(sinfo->bus_clk);
1061         fb_dealloc_cmap(&info->cmap);
1062         free_irq(sinfo->irq_base, info);
1063         iounmap(sinfo->mmio);
1064         release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
1065         if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
1066                 iounmap(info->screen_base);
1067                 release_mem_region(info->fix.smem_start, info->fix.smem_len);
1068         } else {
1069                 atmel_lcdfb_free_video_memory(sinfo);
1070         }
1071
1072         dev_set_drvdata(dev, NULL);
1073         framebuffer_release(info);
1074
1075         return 0;
1076 }
1077
1078 #ifdef CONFIG_PM
1079
1080 static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg)
1081 {
1082         struct fb_info *info = platform_get_drvdata(pdev);
1083         struct atmel_lcdfb_info *sinfo = info->par;
1084
1085         /*
1086          * We don't want to handle interrupts while the clock is
1087          * stopped. It may take forever.
1088          */
1089         lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
1090
1091         sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
1092         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
1093         if (sinfo->atmel_lcdfb_power_control)
1094                 sinfo->atmel_lcdfb_power_control(0);
1095
1096         atmel_lcdfb_stop(sinfo);
1097         atmel_lcdfb_stop_clock(sinfo);
1098
1099         return 0;
1100 }
1101
1102 static int atmel_lcdfb_resume(struct platform_device *pdev)
1103 {
1104         struct fb_info *info = platform_get_drvdata(pdev);
1105         struct atmel_lcdfb_info *sinfo = info->par;
1106
1107         atmel_lcdfb_start_clock(sinfo);
1108         atmel_lcdfb_start(sinfo);
1109         if (sinfo->atmel_lcdfb_power_control)
1110                 sinfo->atmel_lcdfb_power_control(1);
1111         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
1112
1113         /* Enable FIFO & DMA errors */
1114         lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI
1115                         | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
1116
1117         return 0;
1118 }
1119
1120 #else
1121 #define atmel_lcdfb_suspend     NULL
1122 #define atmel_lcdfb_resume      NULL
1123 #endif
1124
1125 static struct platform_driver atmel_lcdfb_driver = {
1126         .remove         = __exit_p(atmel_lcdfb_remove),
1127         .suspend        = atmel_lcdfb_suspend,
1128         .resume         = atmel_lcdfb_resume,
1129
1130         .driver         = {
1131                 .name   = "atmel_lcdfb",
1132                 .owner  = THIS_MODULE,
1133         },
1134 };
1135
1136 static int __init atmel_lcdfb_init(void)
1137 {
1138         return platform_driver_probe(&atmel_lcdfb_driver, atmel_lcdfb_probe);
1139 }
1140
1141 static void __exit atmel_lcdfb_exit(void)
1142 {
1143         platform_driver_unregister(&atmel_lcdfb_driver);
1144 }
1145
1146 module_init(atmel_lcdfb_init);
1147 module_exit(atmel_lcdfb_exit);
1148
1149 MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
1150 MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
1151 MODULE_LICENSE("GPL");