drivers/usb/serial/io_edgeport.c

   1 /*
   2  * Edgeport USB Serial Converter driver
   3  *
   4  * Copyright (C) 2000 Inside Out Networks, All rights reserved.
   5  * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com>
   6  *
   7  *      This program is free software; you can redistribute it and/or modify
   8  *      it under the terms of the GNU General Public License as published by
   9  *      the Free Software Foundation; either version 2 of the License, or
  10  *      (at your option) any later version.
  11  *
  12  * Supports the following devices:
  13  *      Edgeport/4
  14  *      Edgeport/4t
  15  *      Edgeport/2
  16  *      Edgeport/4i
  17  *      Edgeport/2i
  18  *      Edgeport/421
  19  *      Edgeport/21
  20  *      Rapidport/4
  21  *      Edgeport/8
  22  *      Edgeport/2D8
  23  *      Edgeport/4D8
  24  *      Edgeport/8i
  25  *
  26  * For questions or problems with this driver, contact Inside Out
  27  * Networks technical support, or Peter Berger <pberger@brimson.com>,
  28  * or Al Borchers <alborchers@steinerpoint.com>.
  29  *
  30  */
  31
  32 #include <linux/kernel.h>
  33 #include <linux/jiffies.h>
  34 #include <linux/errno.h>
  35 #include <linux/init.h>
  36 #include <linux/slab.h>
  37 #include <linux/tty.h>
  38 #include <linux/tty_driver.h>
  39 #include <linux/tty_flip.h>
  40 #include <linux/module.h>
  41 #include <linux/spinlock.h>
  42 #include <linux/serial.h>
  43 #include <linux/ioctl.h>
  44 #include <linux/wait.h>
  45 #include <linux/firmware.h>
  46 #include <linux/ihex.h>
  47 #include <linux/uaccess.h>
  48 #include <linux/usb.h>
  49 #include <linux/usb/serial.h>
  50 #include "io_edgeport.h"
  51 #include "io_ionsp.h"           /* info for the iosp messages */
  52 #include "io_16654.h"           /* 16654 UART defines */
  53
  54 /*
  55  * Version Information
  56  */
  57 #define DRIVER_VERSION "v2.7"
  58 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli"
  59 #define DRIVER_DESC "Edgeport USB Serial Driver"
  60
  61 #define MAX_NAME_LEN            64
  62
  63 #define CHASE_TIMEOUT           (5*HZ)          /* 5 seconds */
  64 #define OPEN_TIMEOUT            (5*HZ)          /* 5 seconds */
  65 #define COMMAND_TIMEOUT         (5*HZ)          /* 5 seconds */
  66
  67 /* receive port state */
  68 enum RXSTATE {
  69         EXPECT_HDR1 = 0,    /* Expect header byte 1 */
  70         EXPECT_HDR2 = 1,    /* Expect header byte 2 */
  71         EXPECT_DATA = 2,    /* Expect 'RxBytesRemaining' data */
  72         EXPECT_HDR3 = 3,    /* Expect header byte 3 (for status hdrs only) */
  73 };
  74
  75
  76 /* Transmit Fifo
  77  * This Transmit queue is an extension of the edgeport Rx buffer.
  78  * The maximum amount of data buffered in both the edgeport
  79  * Rx buffer (maxTxCredits) and this buffer will never exceed maxTxCredits.
  80  */
  81 struct TxFifo {
  82         unsigned int    head;   /* index to head pointer (write) */
  83         unsigned int    tail;   /* index to tail pointer (read)  */
  84         unsigned int    count;  /* Bytes in queue */
  85         unsigned int    size;   /* Max size of queue (equal to Max number of TxCredits) */
  86         unsigned char   *fifo;  /* allocated Buffer */
  87 };
  88
  89 /* This structure holds all of the local port information */
  90 struct edgeport_port {
  91         __u16                   txCredits;              /* our current credits for this port */
  92         __u16                   maxTxCredits;           /* the max size of the port */
  93
  94         struct TxFifo           txfifo;                 /* transmit fifo -- size will be maxTxCredits */
  95         struct urb              *write_urb;             /* write URB for this port */
  96         bool                    write_in_progress;      /* 'true' while a write URB is outstanding */
  97         spinlock_t              ep_lock;
  98
  99         __u8                    shadowLCR;              /* last LCR value received */
 100         __u8                    shadowMCR;              /* last MCR value received */
 101         __u8                    shadowMSR;              /* last MSR value received */
 102         __u8                    shadowLSR;              /* last LSR value received */
 103         __u8                    shadowXonChar;          /* last value set as XON char in Edgeport */
 104         __u8                    shadowXoffChar;         /* last value set as XOFF char in Edgeport */
 105         __u8                    validDataMask;
 106         __u32                   baudRate;
 107
 108         bool                    open;
 109         bool                    openPending;
 110         bool                    commandPending;
 111         bool                    closePending;
 112         bool                    chaseResponsePending;
 113
 114         wait_queue_head_t       wait_chase;             /* for handling sleeping while waiting for chase to finish */
 115         wait_queue_head_t       wait_open;              /* for handling sleeping while waiting for open to finish */
 116         wait_queue_head_t       wait_command;           /* for handling sleeping while waiting for command to finish */
 117         wait_queue_head_t       delta_msr_wait;         /* for handling sleeping while waiting for msr change to happen */
 118
 119         struct async_icount     icount;
 120         struct usb_serial_port  *port;                  /* loop back to the owner of this object */
 121 };
 122
 123
 124 /* This structure holds all of the individual device information */
 125 struct edgeport_serial {
 126         char                    name[MAX_NAME_LEN+2];           /* string name of this device */
 127
 128         struct edge_manuf_descriptor    manuf_descriptor;       /* the manufacturer descriptor */
 129         struct edge_boot_descriptor     boot_descriptor;        /* the boot firmware descriptor */
 130         struct edgeport_product_info    product_info;           /* Product Info */
 131         struct edge_compatibility_descriptor epic_descriptor;   /* Edgeport compatible descriptor */
 132         int                     is_epic;                        /* flag if EPiC device or not */
 133
 134         __u8                    interrupt_in_endpoint;          /* the interrupt endpoint handle */
 135         unsigned char           *interrupt_in_buffer;           /* the buffer we use for the interrupt endpoint */
 136         struct urb              *interrupt_read_urb;            /* our interrupt urb */
 137
 138         __u8                    bulk_in_endpoint;               /* the bulk in endpoint handle */
 139         unsigned char           *bulk_in_buffer;                /* the buffer we use for the bulk in endpoint */
 140         struct urb              *read_urb;                      /* our bulk read urb */
 141         bool                    read_in_progress;
 142         spinlock_t              es_lock;
 143
 144         __u8                    bulk_out_endpoint;              /* the bulk out endpoint handle */
 145
 146         __s16                   rxBytesAvail;                   /* the number of bytes that we need to read from this device */
 147
 148         enum RXSTATE            rxState;                        /* the current state of the bulk receive processor */
 149         __u8                    rxHeader1;                      /* receive header byte 1 */
 150         __u8                    rxHeader2;                      /* receive header byte 2 */
 151         __u8                    rxHeader3;                      /* receive header byte 3 */
 152         __u8                    rxPort;                         /* the port that we are currently receiving data for */
 153         __u8                    rxStatusCode;                   /* the receive status code */
 154         __u8                    rxStatusParam;                  /* the receive status paramater */
 155         __s16                   rxBytesRemaining;               /* the number of port bytes left to read */
 156         struct usb_serial       *serial;                        /* loop back to the owner of this object */
 157 };
 158
 159 /* baud rate information */
 160 struct divisor_table_entry {
 161         __u32   BaudRate;
 162         __u16  Divisor;
 163 };
 164
 165 /*
 166  * Define table of divisors for Rev A EdgePort/4 hardware
 167  * These assume a 3.6864MHz crystal, the standard /16, and
 168  * MCR.7 = 0.
 169  */
 170
 171 static const struct divisor_table_entry divisor_table[] = {
 172         {   50,         4608},
 173         {   75,         3072},
 174         {   110,        2095},  /* 2094.545455 => 230450   => .0217 % over */
 175         {   134,        1713},  /* 1713.011152 => 230398.5 => .00065% under */
 176         {   150,        1536},
 177         {   300,        768},
 178         {   600,        384},
 179         {   1200,       192},
 180         {   1800,       128},
 181         {   2400,       96},
 182         {   4800,       48},
 183         {   7200,       32},
 184         {   9600,       24},
 185         {   14400,      16},
 186         {   19200,      12},
 187         {   38400,      6},
 188         {   57600,      4},
 189         {   115200,     2},
 190         {   230400,     1},
 191 };
 192
 193 /* local variables */
 194 static int debug;
 195
 196 static atomic_t CmdUrbs;        /* Number of outstanding Command Write Urbs */
 197
 198
 199 /* local function prototypes */
 200
 201 /* function prototypes for all URB callbacks */
 202 static void edge_interrupt_callback(struct urb *urb);
 203 static void edge_bulk_in_callback(struct urb *urb);
 204 static void edge_bulk_out_data_callback(struct urb *urb);
 205 static void edge_bulk_out_cmd_callback(struct urb *urb);
 206
 207 /* function prototypes for the usbserial callbacks */
 208 static int edge_open(struct tty_struct *tty, struct usb_serial_port *port);
 209 static void edge_close(struct usb_serial_port *port);
 210 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 211                                         const unsigned char *buf, int count);
 212 static int edge_write_room(struct tty_struct *tty);
 213 static int edge_chars_in_buffer(struct tty_struct *tty);
 214 static void edge_throttle(struct tty_struct *tty);
 215 static void edge_unthrottle(struct tty_struct *tty);
 216 static void edge_set_termios(struct tty_struct *tty,
 217                                         struct usb_serial_port *port,
 218                                         struct ktermios *old_termios);
 219 static int  edge_ioctl(struct tty_struct *tty,
 220                                         unsigned int cmd, unsigned long arg);
 221 static void edge_break(struct tty_struct *tty, int break_state);
 222 static int  edge_tiocmget(struct tty_struct *tty);
 223 static int  edge_tiocmset(struct tty_struct *tty,
 224                                         unsigned int set, unsigned int clear);
 225 static int  edge_get_icount(struct tty_struct *tty,
 226                                 struct serial_icounter_struct *icount);
 227 static int  edge_startup(struct usb_serial *serial);
 228 static void edge_disconnect(struct usb_serial *serial);
 229 static void edge_release(struct usb_serial *serial);
 230
 231 #include "io_tables.h"  /* all of the devices that this driver supports */
 232
 233 /* function prototypes for all of our local functions */
 234
 235 static void  process_rcvd_data(struct edgeport_serial *edge_serial,
 236                                 unsigned char *buffer, __u16 bufferLength);
 237 static void process_rcvd_status(struct edgeport_serial *edge_serial,
 238                                 __u8 byte2, __u8 byte3);
 239 static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
 240                                 unsigned char *data, int length);
 241 static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr);
 242 static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
 243                                 __u8 lsr, __u8 data);
 244 static int  send_iosp_ext_cmd(struct edgeport_port *edge_port, __u8 command,
 245                                 __u8 param);
 246 static int  calc_baud_rate_divisor(int baud_rate, int *divisor);
 247 static int  send_cmd_write_baud_rate(struct edgeport_port *edge_port,
 248                                 int baudRate);
 249 static void change_port_settings(struct tty_struct *tty,
 250                                 struct edgeport_port *edge_port,
 251                                 struct ktermios *old_termios);
 252 static int  send_cmd_write_uart_register(struct edgeport_port *edge_port,
 253                                 __u8 regNum, __u8 regValue);
 254 static int  write_cmd_usb(struct edgeport_port *edge_port,
 255                                 unsigned char *buffer, int writeLength);
 256 static void send_more_port_data(struct edgeport_serial *edge_serial,
 257                                 struct edgeport_port *edge_port);
 258
 259 static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
 260                                         __u16 length, const __u8 *data);
 261 static int rom_read(struct usb_serial *serial, __u16 extAddr, __u16 addr,
 262                                                 __u16 length, __u8 *data);
 263 static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
 264                                         __u16 length, const __u8 *data);
 265 static void get_manufacturing_desc(struct edgeport_serial *edge_serial);
 266 static void get_boot_desc(struct edgeport_serial *edge_serial);
 267 static void load_application_firmware(struct edgeport_serial *edge_serial);
 268
 269 static void unicode_to_ascii(char *string, int buflen,
 270                                 __le16 *unicode, int unicode_size);
 271
 272
 273 /* ************************************************************************ */
 274 /* ************************************************************************ */
 275 /* ************************************************************************ */
 276 /* ************************************************************************ */
 277
 278 /************************************************************************
 279  *                                                                      *
 280  * update_edgeport_E2PROM()     Compare current versions of             *
 281  *                              Boot ROM and Manufacture                *
 282  *                              Descriptors with versions               *
 283  *                              embedded in this driver                 *
 284  *                                                                      *
 285  ************************************************************************/
 286 static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial)
 287 {
 288         __u32 BootCurVer;
 289         __u32 BootNewVer;
 290         __u8 BootMajorVersion;
 291         __u8 BootMinorVersion;
 292         __u16 BootBuildNumber;
 293         __u32 Bootaddr;
 294         const struct ihex_binrec *rec;
 295         const struct firmware *fw;
 296         const char *fw_name;
 297         int response;
 298
 299         switch (edge_serial->product_info.iDownloadFile) {
 300         case EDGE_DOWNLOAD_FILE_I930:
 301                 fw_name = "edgeport/boot.fw";
 302                 break;
 303         case EDGE_DOWNLOAD_FILE_80251:
 304                 fw_name = "edgeport/boot2.fw";
 305                 break;
 306         default:
 307                 return;
 308         }
 309
 310         response = request_ihex_firmware(&fw, fw_name,
 311                                          &edge_serial->serial->dev->dev);
 312         if (response) {
 313                 printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
 314                        fw_name, response);
 315                 return;
 316         }
 317
 318         rec = (const struct ihex_binrec *)fw->data;
 319         BootMajorVersion = rec->data[0];
 320         BootMinorVersion = rec->data[1];
 321         BootBuildNumber = (rec->data[2] << 8) | rec->data[3];
 322
 323         /* Check Boot Image Version */
 324         BootCurVer = (edge_serial->boot_descriptor.MajorVersion << 24) +
 325                      (edge_serial->boot_descriptor.MinorVersion << 16) +
 326                       le16_to_cpu(edge_serial->boot_descriptor.BuildNumber);
 327
 328         BootNewVer = (BootMajorVersion << 24) +
 329                      (BootMinorVersion << 16) +
 330                       BootBuildNumber;
 331
 332         dbg("Current Boot Image version %d.%d.%d",
 333             edge_serial->boot_descriptor.MajorVersion,
 334             edge_serial->boot_descriptor.MinorVersion,
 335             le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
 336
 337
 338         if (BootNewVer > BootCurVer) {
 339                 dbg("**Update Boot Image from %d.%d.%d to %d.%d.%d",
 340                     edge_serial->boot_descriptor.MajorVersion,
 341                     edge_serial->boot_descriptor.MinorVersion,
 342                     le16_to_cpu(edge_serial->boot_descriptor.BuildNumber),
 343                     BootMajorVersion, BootMinorVersion, BootBuildNumber);
 344
 345                 dbg("Downloading new Boot Image");
 346
 347                 for (rec = ihex_next_binrec(rec); rec;
 348                      rec = ihex_next_binrec(rec)) {
 349                         Bootaddr = be32_to_cpu(rec->addr);
 350                         response = rom_write(edge_serial->serial,
 351                                              Bootaddr >> 16,
 352                                              Bootaddr & 0xFFFF,
 353                                              be16_to_cpu(rec->len),
 354                                              &rec->data[0]);
 355                         if (response < 0) {
 356                                 dev_err(&edge_serial->serial->dev->dev,
 357                                         "rom_write failed (%x, %x, %d)\n",
 358                                         Bootaddr >> 16, Bootaddr & 0xFFFF,
 359                                         be16_to_cpu(rec->len));
 360                                 break;
 361                         }
 362                 }
 363         } else {
 364                 dbg("Boot Image -- already up to date");
 365         }
 366         release_firmware(fw);
 367 }
 368
 369 #if 0
 370 /************************************************************************
 371  *
 372  *  Get string descriptor from device
 373  *
 374  ************************************************************************/
 375 static int get_string_desc(struct usb_device *dev, int Id,
 376                                 struct usb_string_descriptor **pRetDesc)
 377 {
 378         struct usb_string_descriptor StringDesc;
 379         struct usb_string_descriptor *pStringDesc;
 380
 381         dbg("%s - USB String ID = %d", __func__, Id);
 382
 383         if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc,
 384                                                 sizeof(StringDesc)))
 385                 return 0;
 386
 387         pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL);
 388         if (!pStringDesc)
 389                 return -1;
 390
 391         if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc,
 392                                                         StringDesc.bLength)) {
 393                 kfree(pStringDesc);
 394                 return -1;
 395         }
 396
 397         *pRetDesc = pStringDesc;
 398         return 0;
 399 }
 400 #endif
 401
 402 static void dump_product_info(struct edgeport_product_info *product_info)
 403 {
 404         /* Dump Product Info structure */
 405         dbg("**Product Information:");
 406         dbg("  ProductId             %x", product_info->ProductId);
 407         dbg("  NumPorts              %d", product_info->NumPorts);
 408         dbg("  ProdInfoVer           %d", product_info->ProdInfoVer);
 409         dbg("  IsServer              %d", product_info->IsServer);
 410         dbg("  IsRS232               %d", product_info->IsRS232);
 411         dbg("  IsRS422               %d", product_info->IsRS422);
 412         dbg("  IsRS485               %d", product_info->IsRS485);
 413         dbg("  RomSize               %d", product_info->RomSize);
 414         dbg("  RamSize               %d", product_info->RamSize);
 415         dbg("  CpuRev                %x", product_info->CpuRev);
 416         dbg("  BoardRev              %x", product_info->BoardRev);
 417         dbg("  BootMajorVersion      %d.%d.%d", product_info->BootMajorVersion,
 418             product_info->BootMinorVersion,
 419             le16_to_cpu(product_info->BootBuildNumber));
 420         dbg("  FirmwareMajorVersion  %d.%d.%d",
 421                         product_info->FirmwareMajorVersion,
 422                         product_info->FirmwareMinorVersion,
 423                         le16_to_cpu(product_info->FirmwareBuildNumber));
 424         dbg("  ManufactureDescDate   %d/%d/%d",
 425                         product_info->ManufactureDescDate[0],
 426                         product_info->ManufactureDescDate[1],
 427                         product_info->ManufactureDescDate[2]+1900);
 428         dbg("  iDownloadFile         0x%x", product_info->iDownloadFile);
 429         dbg("  EpicVer               %d", product_info->EpicVer);
 430 }
 431
 432 static void get_product_info(struct edgeport_serial *edge_serial)
 433 {
 434         struct edgeport_product_info *product_info = &edge_serial->product_info;
 435
 436         memset(product_info, 0, sizeof(struct edgeport_product_info));
 437
 438         product_info->ProductId = (__u16)(le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ~ION_DEVICE_ID_80251_NETCHIP);
 439         product_info->NumPorts = edge_serial->manuf_descriptor.NumPorts;
 440         product_info->ProdInfoVer = 0;
 441
 442         product_info->RomSize = edge_serial->manuf_descriptor.RomSize;
 443         product_info->RamSize = edge_serial->manuf_descriptor.RamSize;
 444         product_info->CpuRev = edge_serial->manuf_descriptor.CpuRev;
 445         product_info->BoardRev = edge_serial->manuf_descriptor.BoardRev;
 446
 447         product_info->BootMajorVersion =
 448                                 edge_serial->boot_descriptor.MajorVersion;
 449         product_info->BootMinorVersion =
 450                                 edge_serial->boot_descriptor.MinorVersion;
 451         product_info->BootBuildNumber =
 452                                 edge_serial->boot_descriptor.BuildNumber;
 453
 454         memcpy(product_info->ManufactureDescDate,
 455                         edge_serial->manuf_descriptor.DescDate,
 456                         sizeof(edge_serial->manuf_descriptor.DescDate));
 457
 458         /* check if this is 2nd generation hardware */
 459         if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct)
 460                                             & ION_DEVICE_ID_80251_NETCHIP)
 461                 product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251;
 462         else
 463                 product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930;
 464
 465         /* Determine Product type and set appropriate flags */
 466         switch (DEVICE_ID_FROM_USB_PRODUCT_ID(product_info->ProductId)) {
 467         case ION_DEVICE_ID_EDGEPORT_COMPATIBLE:
 468         case ION_DEVICE_ID_EDGEPORT_4T:
 469         case ION_DEVICE_ID_EDGEPORT_4:
 470         case ION_DEVICE_ID_EDGEPORT_2:
 471         case ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU:
 472         case ION_DEVICE_ID_EDGEPORT_8:
 473         case ION_DEVICE_ID_EDGEPORT_421:
 474         case ION_DEVICE_ID_EDGEPORT_21:
 475         case ION_DEVICE_ID_EDGEPORT_2_DIN:
 476         case ION_DEVICE_ID_EDGEPORT_4_DIN:
 477         case ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU:
 478                 product_info->IsRS232 = 1;
 479                 break;
 480
 481         case ION_DEVICE_ID_EDGEPORT_2I: /* Edgeport/2 RS422/RS485 */
 482                 product_info->IsRS422 = 1;
 483                 product_info->IsRS485 = 1;
 484                 break;
 485
 486         case ION_DEVICE_ID_EDGEPORT_8I: /* Edgeport/4 RS422 */
 487         case ION_DEVICE_ID_EDGEPORT_4I: /* Edgeport/4 RS422 */
 488                 product_info->IsRS422 = 1;
 489                 break;
 490         }
 491
 492         dump_product_info(product_info);
 493 }
 494
 495 static int get_epic_descriptor(struct edgeport_serial *ep)
 496 {
 497         int result;
 498         struct usb_serial *serial = ep->serial;
 499         struct edgeport_product_info *product_info = &ep->product_info;
 500         struct edge_compatibility_descriptor *epic = &ep->epic_descriptor;
 501         struct edge_compatibility_bits *bits;
 502
 503         ep->is_epic = 0;
 504         result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 505                                  USB_REQUEST_ION_GET_EPIC_DESC,
 506                                  0xC0, 0x00, 0x00,
 507                                  &ep->epic_descriptor,
 508                                  sizeof(struct edge_compatibility_descriptor),
 509                                  300);
 510
 511         dbg("%s result = %d", __func__, result);
 512
 513         if (result > 0) {
 514                 ep->is_epic = 1;
 515                 memset(product_info, 0, sizeof(struct edgeport_product_info));
 516
 517                 product_info->NumPorts = epic->NumPorts;
 518                 product_info->ProdInfoVer = 0;
 519                 product_info->FirmwareMajorVersion = epic->MajorVersion;
 520                 product_info->FirmwareMinorVersion = epic->MinorVersion;
 521                 product_info->FirmwareBuildNumber = epic->BuildNumber;
 522                 product_info->iDownloadFile = epic->iDownloadFile;
 523                 product_info->EpicVer = epic->EpicVer;
 524                 product_info->Epic = epic->Supports;
 525                 product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE;
 526                 dump_product_info(product_info);
 527
 528                 bits = &ep->epic_descriptor.Supports;
 529                 dbg("**EPIC descriptor:");
 530                 dbg("  VendEnableSuspend: %s", bits->VendEnableSuspend  ? "TRUE": "FALSE");
 531                 dbg("  IOSPOpen         : %s", bits->IOSPOpen           ? "TRUE": "FALSE");
 532                 dbg("  IOSPClose        : %s", bits->IOSPClose          ? "TRUE": "FALSE");
 533                 dbg("  IOSPChase        : %s", bits->IOSPChase          ? "TRUE": "FALSE");
 534                 dbg("  IOSPSetRxFlow    : %s", bits->IOSPSetRxFlow      ? "TRUE": "FALSE");
 535                 dbg("  IOSPSetTxFlow    : %s", bits->IOSPSetTxFlow      ? "TRUE": "FALSE");
 536                 dbg("  IOSPSetXChar     : %s", bits->IOSPSetXChar       ? "TRUE": "FALSE");
 537                 dbg("  IOSPRxCheck      : %s", bits->IOSPRxCheck        ? "TRUE": "FALSE");
 538                 dbg("  IOSPSetClrBreak  : %s", bits->IOSPSetClrBreak    ? "TRUE": "FALSE");
 539                 dbg("  IOSPWriteMCR     : %s", bits->IOSPWriteMCR       ? "TRUE": "FALSE");
 540                 dbg("  IOSPWriteLCR     : %s", bits->IOSPWriteLCR       ? "TRUE": "FALSE");
 541                 dbg("  IOSPSetBaudRate  : %s", bits->IOSPSetBaudRate    ? "TRUE": "FALSE");
 542                 dbg("  TrueEdgeport     : %s", bits->TrueEdgeport       ? "TRUE": "FALSE");
 543         }
 544
 545         return result;
 546 }
 547
 548
 549 /************************************************************************/
 550 /************************************************************************/
 551 /*            U S B  C A L L B A C K   F U N C T I O N S                */
 552 /*            U S B  C A L L B A C K   F U N C T I O N S                */
 553 /************************************************************************/
 554 /************************************************************************/
 555
 556 /*****************************************************************************
 557  * edge_interrupt_callback
 558  *      this is the callback function for when we have received data on the
 559  *      interrupt endpoint.
 560  *****************************************************************************/
 561 static void edge_interrupt_callback(struct urb *urb)
 562 {
 563         struct edgeport_serial  *edge_serial = urb->context;
 564         struct edgeport_port *edge_port;
 565         struct usb_serial_port *port;
 566         struct tty_struct *tty;
 567         unsigned char *data = urb->transfer_buffer;
 568         int length = urb->actual_length;
 569         int bytes_avail;
 570         int position;
 571         int txCredits;
 572         int portNumber;
 573         int result;
 574         int status = urb->status;
 575
 576         dbg("%s", __func__);
 577
 578         switch (status) {
 579         case 0:
 580                 /* success */
 581                 break;
 582         case -ECONNRESET:
 583         case -ENOENT:
 584         case -ESHUTDOWN:
 585                 /* this urb is terminated, clean up */
 586                 dbg("%s - urb shutting down with status: %d",
 587                                                 __func__, status);
 588                 return;
 589         default:
 590                 dbg("%s - nonzero urb status received: %d", __func__, status);
 591                 goto exit;
 592         }
 593
 594         /* process this interrupt-read even if there are no ports open */
 595         if (length) {
 596                 usb_serial_debug_data(debug, &edge_serial->serial->dev->dev,
 597                                                 __func__, length, data);
 598
 599                 if (length > 1) {
 600                         bytes_avail = data[0] | (data[1] << 8);
 601                         if (bytes_avail) {
 602                                 spin_lock(&edge_serial->es_lock);
 603                                 edge_serial->rxBytesAvail += bytes_avail;
 604                                 dbg("%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d", __func__, bytes_avail, edge_serial->rxBytesAvail, edge_serial->read_in_progress);
 605
 606                                 if (edge_serial->rxBytesAvail > 0 &&
 607                                     !edge_serial->read_in_progress) {
 608                                         dbg("%s - posting a read", __func__);
 609                                         edge_serial->read_in_progress = true;
 610
 611                                         /* we have pending bytes on the
 612                                            bulk in pipe, send a request */
 613                                         edge_serial->read_urb->dev = edge_serial->serial->dev;
 614                                         result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
 615                                         if (result) {
 616                                                 dev_err(&edge_serial->serial->dev->dev, "%s - usb_submit_urb(read bulk) failed with result = %d\n", __func__, result);
 617                                                 edge_serial->read_in_progress = false;
 618                                         }
 619                                 }
 620                                 spin_unlock(&edge_serial->es_lock);
 621                         }
 622                 }
 623                 /* grab the txcredits for the ports if available */
 624                 position = 2;
 625                 portNumber = 0;
 626                 while ((position < length) &&
 627                                 (portNumber < edge_serial->serial->num_ports)) {
 628                         txCredits = data[position] | (data[position+1] << 8);
 629                         if (txCredits) {
 630                                 port = edge_serial->serial->port[portNumber];
 631                                 edge_port = usb_get_serial_port_data(port);
 632                                 if (edge_port->open) {
 633                                         spin_lock(&edge_port->ep_lock);
 634                                         edge_port->txCredits += txCredits;
 635                                         spin_unlock(&edge_port->ep_lock);
 636                                         dbg("%s - txcredits for port%d = %d",
 637                                                         __func__, portNumber,
 638                                                         edge_port->txCredits);
 639
 640                                         /* tell the tty driver that something
 641                                            has changed */
 642                                         tty = tty_port_tty_get(
 643                                                 &edge_port->port->port);
 644                                         if (tty) {
 645                                                 tty_wakeup(tty);
 646                                                 tty_kref_put(tty);
 647                                         }
 648                                         /* Since we have more credit, check
 649                                            if more data can be sent */
 650                                         send_more_port_data(edge_serial,
 651                                                                 edge_port);
 652                                 }
 653                         }
 654                         position += 2;
 655                         ++portNumber;
 656                 }
 657         }
 658
 659 exit:
 660         result = usb_submit_urb(urb, GFP_ATOMIC);
 661         if (result)
 662                 dev_err(&urb->dev->dev,
 663                         "%s - Error %d submitting control urb\n",
 664                                                 __func__, result);
 665 }
 666
 667
 668 /*****************************************************************************
 669  * edge_bulk_in_callback
 670  *      this is the callback function for when we have received data on the
 671  *      bulk in endpoint.
 672  *****************************************************************************/
 673 static void edge_bulk_in_callback(struct urb *urb)
 674 {
 675         struct edgeport_serial  *edge_serial = urb->context;
 676         unsigned char           *data = urb->transfer_buffer;
 677         int                     retval;
 678         __u16                   raw_data_length;
 679         int status = urb->status;
 680
 681         dbg("%s", __func__);
 682
 683         if (status) {
 684                 dbg("%s - nonzero read bulk status received: %d",
 685                     __func__, status);
 686                 edge_serial->read_in_progress = false;
 687                 return;
 688         }
 689
 690         if (urb->actual_length == 0) {
 691                 dbg("%s - read bulk callback with no data", __func__);
 692                 edge_serial->read_in_progress = false;
 693                 return;
 694         }
 695
 696         raw_data_length = urb->actual_length;
 697
 698         usb_serial_debug_data(debug, &edge_serial->serial->dev->dev,
 699                                         __func__, raw_data_length, data);
 700
 701         spin_lock(&edge_serial->es_lock);
 702
 703         /* decrement our rxBytes available by the number that we just got */
 704         edge_serial->rxBytesAvail -= raw_data_length;
 705
 706         dbg("%s - Received = %d, rxBytesAvail %d", __func__,
 707                                 raw_data_length, edge_serial->rxBytesAvail);
 708
 709         process_rcvd_data(edge_serial, data, urb->actual_length);
 710
 711         /* check to see if there's any more data for us to read */
 712         if (edge_serial->rxBytesAvail > 0) {
 713                 dbg("%s - posting a read", __func__);
 714                 edge_serial->read_urb->dev = edge_serial->serial->dev;
 715                 retval = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
 716                 if (retval) {
 717                         dev_err(&urb->dev->dev,
 718                                 "%s - usb_submit_urb(read bulk) failed, "
 719                                 "retval = %d\n", __func__, retval);
 720                         edge_serial->read_in_progress = false;
 721                 }
 722         } else {
 723                 edge_serial->read_in_progress = false;
 724         }
 725
 726         spin_unlock(&edge_serial->es_lock);
 727 }
 728
 729
 730 /*****************************************************************************
 731  * edge_bulk_out_data_callback
 732  *      this is the callback function for when we have finished sending
 733  *      serial data on the bulk out endpoint.
 734  *****************************************************************************/
 735 static void edge_bulk_out_data_callback(struct urb *urb)
 736 {
 737         struct edgeport_port *edge_port = urb->context;
 738         struct tty_struct *tty;
 739         int status = urb->status;
 740
 741         dbg("%s", __func__);
 742
 743         if (status) {
 744                 dbg("%s - nonzero write bulk status received: %d",
 745                     __func__, status);
 746         }
 747
 748         tty = tty_port_tty_get(&edge_port->port->port);
 749
 750         if (tty && edge_port->open) {
 751                 /* let the tty driver wakeup if it has a special
 752                    write_wakeup function */
 753                 tty_wakeup(tty);
 754         }
 755         tty_kref_put(tty);
 756
 757         /* Release the Write URB */
 758         edge_port->write_in_progress = false;
 759
 760         /* Check if more data needs to be sent */
 761         send_more_port_data((struct edgeport_serial *)
 762                 (usb_get_serial_data(edge_port->port->serial)), edge_port);
 763 }
 764
 765
 766 /*****************************************************************************
 767  * BulkOutCmdCallback
 768  *      this is the callback function for when we have finished sending a
 769  *      command on the bulk out endpoint.
 770  *****************************************************************************/
 771 static void edge_bulk_out_cmd_callback(struct urb *urb)
 772 {
 773         struct edgeport_port *edge_port = urb->context;
 774         struct tty_struct *tty;
 775         int status = urb->status;
 776
 777         dbg("%s", __func__);
 778
 779         atomic_dec(&CmdUrbs);
 780         dbg("%s - FREE URB %p (outstanding %d)", __func__,
 781                                         urb, atomic_read(&CmdUrbs));
 782
 783
 784         /* clean up the transfer buffer */
 785         kfree(urb->transfer_buffer);
 786
 787         /* Free the command urb */
 788         usb_free_urb(urb);
 789
 790         if (status) {
 791                 dbg("%s - nonzero write bulk status received: %d",
 792                                                         __func__, status);
 793                 return;
 794         }
 795
 796         /* Get pointer to tty */
 797         tty = tty_port_tty_get(&edge_port->port->port);
 798
 799         /* tell the tty driver that something has changed */
 800         if (tty && edge_port->open)
 801                 tty_wakeup(tty);
 802         tty_kref_put(tty);
 803
 804         /* we have completed the command */
 805         edge_port->commandPending = false;
 806         wake_up(&edge_port->wait_command);
 807 }
 808
 809
 810 /*****************************************************************************
 811  * Driver tty interface functions
 812  *****************************************************************************/
 813
 814 /*****************************************************************************
 815  * SerialOpen
 816  *      this function is called by the tty driver when a port is opened
 817  *      If successful, we return 0
 818  *      Otherwise we return a negative error number.
 819  *****************************************************************************/
 820 static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 821 {
 822         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 823         struct usb_serial *serial;
 824         struct edgeport_serial *edge_serial;
 825         int response;
 826
 827         dbg("%s - port %d", __func__, port->number);
 828
 829         if (edge_port == NULL)
 830                 return -ENODEV;
 831
 832         /* see if we've set up our endpoint info yet (can't set it up
 833            in edge_startup as the structures were not set up at that time.) */
 834         serial = port->serial;
 835         edge_serial = usb_get_serial_data(serial);
 836         if (edge_serial == NULL)
 837                 return -ENODEV;
 838         if (edge_serial->interrupt_in_buffer == NULL) {
 839                 struct usb_serial_port *port0 = serial->port[0];
 840
 841                 /* not set up yet, so do it now */
 842                 edge_serial->interrupt_in_buffer =
 843                                         port0->interrupt_in_buffer;
 844                 edge_serial->interrupt_in_endpoint =
 845                                         port0->interrupt_in_endpointAddress;
 846                 edge_serial->interrupt_read_urb = port0->interrupt_in_urb;
 847                 edge_serial->bulk_in_buffer = port0->bulk_in_buffer;
 848                 edge_serial->bulk_in_endpoint =
 849                                         port0->bulk_in_endpointAddress;
 850                 edge_serial->read_urb = port0->read_urb;
 851                 edge_serial->bulk_out_endpoint =
 852                                         port0->bulk_out_endpointAddress;
 853
 854                 /* set up our interrupt urb */
 855                 usb_fill_int_urb(edge_serial->interrupt_read_urb,
 856                       serial->dev,
 857                       usb_rcvintpipe(serial->dev,
 858                                 port0->interrupt_in_endpointAddress),
 859                       port0->interrupt_in_buffer,
 860                       edge_serial->interrupt_read_urb->transfer_buffer_length,
 861                       edge_interrupt_callback, edge_serial,
 862                       edge_serial->interrupt_read_urb->interval);
 863
 864                 /* set up our bulk in urb */
 865                 usb_fill_bulk_urb(edge_serial->read_urb, serial->dev,
 866                         usb_rcvbulkpipe(serial->dev,
 867                                 port0->bulk_in_endpointAddress),
 868                         port0->bulk_in_buffer,
 869                         edge_serial->read_urb->transfer_buffer_length,
 870                         edge_bulk_in_callback, edge_serial);
 871                 edge_serial->read_in_progress = false;
 872
 873                 /* start interrupt read for this edgeport
 874                  * this interrupt will continue as long
 875                  * as the edgeport is connected */
 876                 response = usb_submit_urb(edge_serial->interrupt_read_urb,
 877                                                                 GFP_KERNEL);
 878                 if (response) {
 879                         dev_err(&port->dev,
 880                                 "%s - Error %d submitting control urb\n",
 881                                                         __func__, response);
 882                 }
 883         }
 884
 885         /* initialize our wait queues */
 886         init_waitqueue_head(&edge_port->wait_open);
 887         init_waitqueue_head(&edge_port->wait_chase);
 888         init_waitqueue_head(&edge_port->delta_msr_wait);
 889         init_waitqueue_head(&edge_port->wait_command);
 890
 891         /* initialize our icount structure */
 892         memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount));
 893
 894         /* initialize our port settings */
 895         edge_port->txCredits = 0;       /* Can't send any data yet */
 896         /* Must always set this bit to enable ints! */
 897         edge_port->shadowMCR = MCR_MASTER_IE;
 898         edge_port->chaseResponsePending = false;
 899
 900         /* send a open port command */
 901         edge_port->openPending = true;
 902         edge_port->open        = false;
 903         response = send_iosp_ext_cmd(edge_port, IOSP_CMD_OPEN_PORT, 0);
 904
 905         if (response < 0) {
 906                 dev_err(&port->dev, "%s - error sending open port command\n",
 907                                                                 __func__);
 908                 edge_port->openPending = false;
 909                 return -ENODEV;
 910         }
 911
 912         /* now wait for the port to be completely opened */
 913         wait_event_timeout(edge_port->wait_open, !edge_port->openPending,
 914                                                                 OPEN_TIMEOUT);
 915
 916         if (!edge_port->open) {
 917                 /* open timed out */
 918                 dbg("%s - open timedout", __func__);
 919                 edge_port->openPending = false;
 920                 return -ENODEV;
 921         }
 922
 923         /* create the txfifo */
 924         edge_port->txfifo.head  = 0;
 925         edge_port->txfifo.tail  = 0;
 926         edge_port->txfifo.count = 0;
 927         edge_port->txfifo.size  = edge_port->maxTxCredits;
 928         edge_port->txfifo.fifo  = kmalloc(edge_port->maxTxCredits, GFP_KERNEL);
 929
 930         if (!edge_port->txfifo.fifo) {
 931                 dbg("%s - no memory", __func__);
 932                 edge_close(port);
 933                 return -ENOMEM;
 934         }
 935
 936         /* Allocate a URB for the write */
 937         edge_port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
 938         edge_port->write_in_progress = false;
 939
 940         if (!edge_port->write_urb) {
 941                 dbg("%s - no memory", __func__);
 942                 edge_close(port);
 943                 return -ENOMEM;
 944         }
 945
 946         dbg("%s(%d) - Initialize TX fifo to %d bytes",
 947                         __func__, port->number, edge_port->maxTxCredits);
 948
 949         dbg("%s exited", __func__);
 950
 951         return 0;
 952 }
 953
 954
 955 /************************************************************************
 956  *
 957  * block_until_chase_response
 958  *
 959  *      This function will block the close until one of the following:
 960  *              1. Response to our Chase comes from Edgeport
 961  *              2. A timeout of 10 seconds without activity has expired
 962  *                 (1K of Edgeport data @ 2400 baud ==> 4 sec to empty)
 963  *
 964  ************************************************************************/
 965 static void block_until_chase_response(struct edgeport_port *edge_port)
 966 {
 967         DEFINE_WAIT(wait);
 968         __u16 lastCredits;
 969         int timeout = 1*HZ;
 970         int loop = 10;
 971
 972         while (1) {
 973                 /* Save Last credits */
 974                 lastCredits = edge_port->txCredits;
 975
 976                 /* Did we get our Chase response */
 977                 if (!edge_port->chaseResponsePending) {
 978                         dbg("%s - Got Chase Response", __func__);
 979
 980                         /* did we get all of our credit back? */
 981                         if (edge_port->txCredits == edge_port->maxTxCredits) {
 982                                 dbg("%s - Got all credits", __func__);
 983                                 return;
 984                         }
 985                 }
 986
 987                 /* Block the thread for a while */
 988                 prepare_to_wait(&edge_port->wait_chase, &wait,
 989                                                 TASK_UNINTERRUPTIBLE);
 990                 schedule_timeout(timeout);
 991                 finish_wait(&edge_port->wait_chase, &wait);
 992
 993                 if (lastCredits == edge_port->txCredits) {
 994                         /* No activity.. count down. */
 995                         loop--;
 996                         if (loop == 0) {
 997                                 edge_port->chaseResponsePending = false;
 998                                 dbg("%s - Chase TIMEOUT", __func__);
 999                                 return;
1000                         }
1001                 } else {
1002                         /* Reset timeout value back to 10 seconds */
1003                         dbg("%s - Last %d, Current %d", __func__,
1004                                         lastCredits, edge_port->txCredits);
1005                         loop = 10;
1006                 }
1007         }
1008 }
1009
1010
1011 /************************************************************************
1012  *
1013  * block_until_tx_empty
1014  *
1015  *      This function will block the close until one of the following:
1016  *              1. TX count are 0
1017  *              2. The edgeport has stopped
1018  *              3. A timeout of 3 seconds without activity has expired
1019  *
1020  ************************************************************************/
1021 static void block_until_tx_empty(struct edgeport_port *edge_port)
1022 {
1023         DEFINE_WAIT(wait);
1024         struct TxFifo *fifo = &edge_port->txfifo;
1025         __u32 lastCount;
1026         int timeout = HZ/10;
1027         int loop = 30;
1028
1029         while (1) {
1030                 /* Save Last count */
1031                 lastCount = fifo->count;
1032
1033                 /* Is the Edgeport Buffer empty? */
1034                 if (lastCount == 0) {
1035                         dbg("%s - TX Buffer Empty", __func__);
1036                         return;
1037                 }
1038
1039                 /* Block the thread for a while */
1040                 prepare_to_wait(&edge_port->wait_chase, &wait,
1041                                                 TASK_UNINTERRUPTIBLE);
1042                 schedule_timeout(timeout);
1043                 finish_wait(&edge_port->wait_chase, &wait);
1044
1045                 dbg("%s wait", __func__);
1046
1047                 if (lastCount == fifo->count) {
1048                         /* No activity.. count down. */
1049                         loop--;
1050                         if (loop == 0) {
1051                                 dbg("%s - TIMEOUT", __func__);
1052                                 return;
1053                         }
1054                 } else {
1055                         /* Reset timeout value back to seconds */
1056                         loop = 30;
1057                 }
1058         }
1059 }
1060
1061
1062 /*****************************************************************************
1063  * edge_close
1064  *      this function is called by the tty driver when a port is closed
1065  *****************************************************************************/
1066 static void edge_close(struct usb_serial_port *port)
1067 {
1068         struct edgeport_serial *edge_serial;
1069         struct edgeport_port *edge_port;
1070         int status;
1071
1072         dbg("%s - port %d", __func__, port->number);
1073
1074         edge_serial = usb_get_serial_data(port->serial);
1075         edge_port = usb_get_serial_port_data(port);
1076         if (edge_serial == NULL || edge_port == NULL)
1077                 return;
1078
1079         /* block until tx is empty */
1080         block_until_tx_empty(edge_port);
1081
1082         edge_port->closePending = true;
1083
1084         if ((!edge_serial->is_epic) ||
1085             ((edge_serial->is_epic) &&
1086              (edge_serial->epic_descriptor.Supports.IOSPChase))) {
1087                 /* flush and chase */
1088                 edge_port->chaseResponsePending = true;
1089
1090                 dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__);
1091                 status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0);
1092                 if (status == 0)
1093                         /* block until chase finished */
1094                         block_until_chase_response(edge_port);
1095                 else
1096                         edge_port->chaseResponsePending = false;
1097         }
1098
1099         if ((!edge_serial->is_epic) ||
1100             ((edge_serial->is_epic) &&
1101              (edge_serial->epic_descriptor.Supports.IOSPClose))) {
1102                /* close the port */
1103                 dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __func__);
1104                 send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0);
1105         }
1106
1107         /* port->close = true; */
1108         edge_port->closePending = false;
1109         edge_port->open = false;
1110         edge_port->openPending = false;
1111
1112         usb_kill_urb(edge_port->write_urb);
1113
1114         if (edge_port->write_urb) {
1115                 /* if this urb had a transfer buffer already
1116                                 (old transfer) free it */
1117                 kfree(edge_port->write_urb->transfer_buffer);
1118                 usb_free_urb(edge_port->write_urb);
1119                 edge_port->write_urb = NULL;
1120         }
1121         kfree(edge_port->txfifo.fifo);
1122         edge_port->txfifo.fifo = NULL;
1123
1124         dbg("%s exited", __func__);
1125 }
1126
1127 /*****************************************************************************
1128  * SerialWrite
1129  *      this function is called by the tty driver when data should be written
1130  *      to the port.
1131  *      If successful, we return the number of bytes written, otherwise we
1132  *      return a negative error number.
1133  *****************************************************************************/
1134 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
1135                                         const unsigned char *data, int count)
1136 {
1137         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1138         struct TxFifo *fifo;
1139         int copySize;
1140         int bytesleft;
1141         int firsthalf;
1142         int secondhalf;
1143         unsigned long flags;
1144
1145         dbg("%s - port %d", __func__, port->number);
1146
1147         if (edge_port == NULL)
1148                 return -ENODEV;
1149
1150         /* get a pointer to the Tx fifo */
1151         fifo = &edge_port->txfifo;
1152
1153         spin_lock_irqsave(&edge_port->ep_lock, flags);
1154
1155         /* calculate number of bytes to put in fifo */
1156         copySize = min((unsigned int)count,
1157                                 (edge_port->txCredits - fifo->count));
1158
1159         dbg("%s(%d) of %d byte(s) Fifo room  %d -- will copy %d bytes",
1160                         __func__, port->number, count,
1161                         edge_port->txCredits - fifo->count, copySize);
1162
1163         /* catch writes of 0 bytes which the tty driver likes to give us,
1164            and when txCredits is empty */
1165         if (copySize == 0) {
1166                 dbg("%s - copySize = Zero", __func__);
1167                 goto finish_write;
1168         }
1169
1170         /* queue the data
1171          * since we can never overflow the buffer we do not have to check for a
1172          * full condition
1173          *
1174          * the copy is done is two parts -- first fill to the end of the buffer
1175          * then copy the reset from the start of the buffer
1176          */
1177         bytesleft = fifo->size - fifo->head;
1178         firsthalf = min(bytesleft, copySize);
1179         dbg("%s - copy %d bytes of %d into fifo ", __func__,
1180                                         firsthalf, bytesleft);
1181
1182         /* now copy our data */
1183         memcpy(&fifo->fifo[fifo->head], data, firsthalf);
1184         usb_serial_debug_data(debug, &port->dev, __func__,
1185                                         firsthalf, &fifo->fifo[fifo->head]);
1186
1187         /* update the index and size */
1188         fifo->head  += firsthalf;
1189         fifo->count += firsthalf;
1190
1191         /* wrap the index */
1192         if (fifo->head == fifo->size)
1193                 fifo->head = 0;
1194
1195         secondhalf = copySize-firsthalf;
1196
1197         if (secondhalf) {
1198                 dbg("%s - copy rest of data %d", __func__, secondhalf);
1199                 memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf);
1200                 usb_serial_debug_data(debug, &port->dev, __func__,
1201                                         secondhalf, &fifo->fifo[fifo->head]);
1202                 /* update the index and size */
1203                 fifo->count += secondhalf;
1204                 fifo->head  += secondhalf;
1205                 /* No need to check for wrap since we can not get to end of
1206                  * the fifo in this part
1207                  */
1208         }
1209
1210 finish_write:
1211         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1212
1213         send_more_port_data((struct edgeport_serial *)
1214                         usb_get_serial_data(port->serial), edge_port);
1215
1216         dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __func__,
1217                                 copySize, edge_port->txCredits, fifo->count);
1218
1219         return copySize;
1220 }
1221
1222
1223 /************************************************************************
1224  *
1225  * send_more_port_data()
1226  *
1227  *      This routine attempts to write additional UART transmit data
1228  *      to a port over the USB bulk pipe. It is called (1) when new
1229  *      data has been written to a port's TxBuffer from higher layers
1230  *      (2) when the peripheral sends us additional TxCredits indicating
1231  *      that it can accept more Tx data for a given port; and (3) when
1232  *      a bulk write completes successfully and we want to see if we
1233  *      can transmit more.
1234  *
1235  ************************************************************************/
1236 static void send_more_port_data(struct edgeport_serial *edge_serial,
1237                                         struct edgeport_port *edge_port)
1238 {
1239         struct TxFifo   *fifo = &edge_port->txfifo;
1240         struct urb      *urb;
1241         unsigned char   *buffer;
1242         int             status;
1243         int             count;
1244         int             bytesleft;
1245         int             firsthalf;
1246         int             secondhalf;
1247         unsigned long   flags;
1248
1249         dbg("%s(%d)", __func__, edge_port->port->number);
1250
1251         spin_lock_irqsave(&edge_port->ep_lock, flags);
1252
1253         if (edge_port->write_in_progress ||
1254             !edge_port->open             ||
1255             (fifo->count == 0)) {
1256                 dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d",
1257                                 __func__, edge_port->port->number,
1258                                 fifo->count, edge_port->write_in_progress);
1259                 goto exit_send;
1260         }
1261
1262         /* since the amount of data in the fifo will always fit into the
1263          * edgeport buffer we do not need to check the write length
1264          *
1265          * Do we have enough credits for this port to make it worthwhile
1266          * to bother queueing a write. If it's too small, say a few bytes,
1267          * it's better to wait for more credits so we can do a larger write.
1268          */
1269         if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) {
1270                 dbg("%s(%d) Not enough credit - fifo %d TxCredit %d",
1271                         __func__, edge_port->port->number, fifo->count,
1272                         edge_port->txCredits);
1273                 goto exit_send;
1274         }
1275
1276         /* lock this write */
1277         edge_port->write_in_progress = true;
1278
1279         /* get a pointer to the write_urb */
1280         urb = edge_port->write_urb;
1281
1282         /* make sure transfer buffer is freed */
1283         kfree(urb->transfer_buffer);
1284         urb->transfer_buffer = NULL;
1285
1286         /* build the data header for the buffer and port that we are about
1287            to send out */
1288         count = fifo->count;
1289         buffer = kmalloc(count+2, GFP_ATOMIC);
1290         if (buffer == NULL) {
1291                 dev_err(&edge_port->port->dev,
1292                                 "%s - no more kernel memory...\n", __func__);
1293                 edge_port->write_in_progress = false;
1294                 goto exit_send;
1295         }
1296         buffer[0] = IOSP_BUILD_DATA_HDR1(edge_port->port->number
1297                                 - edge_port->port->serial->minor, count);
1298         buffer[1] = IOSP_BUILD_DATA_HDR2(edge_port->port->number
1299                                 - edge_port->port->serial->minor, count);
1300
1301         /* now copy our data */
1302         bytesleft =  fifo->size - fifo->tail;
1303         firsthalf = min(bytesleft, count);
1304         memcpy(&buffer[2], &fifo->fifo[fifo->tail], firsthalf);
1305         fifo->tail  += firsthalf;
1306         fifo->count -= firsthalf;
1307         if (fifo->tail == fifo->size)
1308                 fifo->tail = 0;
1309
1310         secondhalf = count-firsthalf;
1311         if (secondhalf) {
1312                 memcpy(&buffer[2+firsthalf], &fifo->fifo[fifo->tail],
1313                                                                 secondhalf);
1314                 fifo->tail  += secondhalf;
1315                 fifo->count -= secondhalf;
1316         }
1317
1318         if (count)
1319                 usb_serial_debug_data(debug, &edge_port->port->dev,
1320                                                 __func__, count, &buffer[2]);
1321
1322         /* fill up the urb with all of our data and submit it */
1323         usb_fill_bulk_urb(urb, edge_serial->serial->dev,
1324                         usb_sndbulkpipe(edge_serial->serial->dev,
1325                                         edge_serial->bulk_out_endpoint),
1326                         buffer, count+2,
1327                         edge_bulk_out_data_callback, edge_port);
1328
1329         /* decrement the number of credits we have by the number we just sent */
1330         edge_port->txCredits -= count;
1331         edge_port->icount.tx += count;
1332
1333         urb->dev = edge_serial->serial->dev;
1334         status = usb_submit_urb(urb, GFP_ATOMIC);
1335         if (status) {
1336                 /* something went wrong */
1337                 dev_err(&edge_port->port->dev,
1338                         "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n",
1339                                 __func__, status);
1340                 edge_port->write_in_progress = false;
1341
1342                 /* revert the credits as something bad happened. */
1343                 edge_port->txCredits += count;
1344                 edge_port->icount.tx -= count;
1345         }
1346         dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d",
1347                         __func__, count, edge_port->txCredits, fifo->count);
1348
1349 exit_send:
1350         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1351 }
1352
1353
1354 /*****************************************************************************
1355  * edge_write_room
1356  *      this function is called by the tty driver when it wants to know how
1357  *      many bytes of data we can accept for a specific port. If successful,
1358  *      we return the amount of room that we have for this port (the txCredits)
1359  *      otherwise we return a negative error number.
1360  *****************************************************************************/
1361 static int edge_write_room(struct tty_struct *tty)
1362 {
1363         struct usb_serial_port *port = tty->driver_data;
1364         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1365         int room;
1366         unsigned long flags;
1367
1368         dbg("%s", __func__);
1369
1370         if (edge_port == NULL)
1371                 return 0;
1372         if (edge_port->closePending)
1373                 return 0;
1374
1375         dbg("%s - port %d", __func__, port->number);
1376
1377         if (!edge_port->open) {
1378                 dbg("%s - port not opened", __func__);
1379                 return 0;
1380         }
1381
1382         /* total of both buffers is still txCredit */
1383         spin_lock_irqsave(&edge_port->ep_lock, flags);
1384         room = edge_port->txCredits - edge_port->txfifo.count;
1385         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1386
1387         dbg("%s - returns %d", __func__, room);
1388         return room;
1389 }
1390
1391
1392 /*****************************************************************************
1393  * edge_chars_in_buffer
1394  *      this function is called by the tty driver when it wants to know how
1395  *      many bytes of data we currently have outstanding in the port (data that
1396  *      has been written, but hasn't made it out the port yet)
1397  *      If successful, we return the number of bytes left to be written in the
1398  *      system,
1399  *      Otherwise we return a negative error number.
1400  *****************************************************************************/
1401 static int edge_chars_in_buffer(struct tty_struct *tty)
1402 {
1403         struct usb_serial_port *port = tty->driver_data;
1404         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1405         int num_chars;
1406         unsigned long flags;
1407
1408         dbg("%s", __func__);
1409
1410         if (edge_port == NULL)
1411                 return 0;
1412         if (edge_port->closePending)
1413                 return 0;
1414
1415         if (!edge_port->open) {
1416                 dbg("%s - port not opened", __func__);
1417                 return 0;
1418         }
1419
1420         spin_lock_irqsave(&edge_port->ep_lock, flags);
1421         num_chars = edge_port->maxTxCredits - edge_port->txCredits +
1422                                                 edge_port->txfifo.count;
1423         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1424         if (num_chars) {
1425                 dbg("%s(port %d) - returns %d", __func__,
1426                                                 port->number, num_chars);
1427         }
1428
1429         return num_chars;
1430 }
1431
1432
1433 /*****************************************************************************
1434  * SerialThrottle
1435  *      this function is called by the tty driver when it wants to stop the data
1436  *      being read from the port.
1437  *****************************************************************************/
1438 static void edge_throttle(struct tty_struct *tty)
1439 {
1440         struct usb_serial_port *port = tty->driver_data;
1441         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1442         int status;
1443
1444         dbg("%s - port %d", __func__, port->number);
1445
1446         if (edge_port == NULL)
1447                 return;
1448
1449         if (!edge_port->open) {
1450                 dbg("%s - port not opened", __func__);
1451                 return;
1452         }
1453
1454         /* if we are implementing XON/XOFF, send the stop character */
1455         if (I_IXOFF(tty)) {
1456                 unsigned char stop_char = STOP_CHAR(tty);
1457                 status = edge_write(tty, port, &stop_char, 1);
1458                 if (status <= 0)
1459                         return;
1460         }
1461
1462         /* if we are implementing RTS/CTS, toggle that line */
1463         if (tty->termios->c_cflag & CRTSCTS) {
1464                 edge_port->shadowMCR &= ~MCR_RTS;
1465                 status = send_cmd_write_uart_register(edge_port, MCR,
1466                                                         edge_port->shadowMCR);
1467                 if (status != 0)
1468                         return;
1469         }
1470 }
1471
1472
1473 /*****************************************************************************
1474  * edge_unthrottle
1475  *      this function is called by the tty driver when it wants to resume the
1476  *      data being read from the port (called after SerialThrottle is called)
1477  *****************************************************************************/
1478 static void edge_unthrottle(struct tty_struct *tty)
1479 {
1480         struct usb_serial_port *port = tty->driver_data;
1481         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1482         int status;
1483
1484         dbg("%s - port %d", __func__, port->number);
1485
1486         if (edge_port == NULL)
1487                 return;
1488
1489         if (!edge_port->open) {
1490                 dbg("%s - port not opened", __func__);
1491                 return;
1492         }
1493
1494         /* if we are implementing XON/XOFF, send the start character */
1495         if (I_IXOFF(tty)) {
1496                 unsigned char start_char = START_CHAR(tty);
1497                 status = edge_write(tty, port, &start_char, 1);
1498                 if (status <= 0)
1499                         return;
1500         }
1501         /* if we are implementing RTS/CTS, toggle that line */
1502         if (tty->termios->c_cflag & CRTSCTS) {
1503                 edge_port->shadowMCR |= MCR_RTS;
1504                 send_cmd_write_uart_register(edge_port, MCR,
1505                                                 edge_port->shadowMCR);
1506         }
1507 }
1508
1509
1510 /*****************************************************************************
1511  * SerialSetTermios
1512  *      this function is called by the tty driver when it wants to change
1513  * the termios structure
1514  *****************************************************************************/
1515 static void edge_set_termios(struct tty_struct *tty,
1516         struct usb_serial_port *port, struct ktermios *old_termios)
1517 {
1518         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1519         unsigned int cflag;
1520
1521         cflag = tty->termios->c_cflag;
1522         dbg("%s - clfag %08x iflag %08x", __func__,
1523             tty->termios->c_cflag, tty->termios->c_iflag);
1524         dbg("%s - old clfag %08x old iflag %08x", __func__,
1525             old_termios->c_cflag, old_termios->c_iflag);
1526
1527         dbg("%s - port %d", __func__, port->number);
1528
1529         if (edge_port == NULL)
1530                 return;
1531
1532         if (!edge_port->open) {
1533                 dbg("%s - port not opened", __func__);
1534                 return;
1535         }
1536
1537         /* change the port settings to the new ones specified */
1538         change_port_settings(tty, edge_port, old_termios);
1539 }
1540
1541
1542 /*****************************************************************************
1543  * get_lsr_info - get line status register info
1544  *
1545  * Purpose: Let user call ioctl() to get info when the UART physically
1546  *          is emptied.  On bus types like RS485, the transmitter must
1547  *          release the bus after transmitting. This must be done when
1548  *          the transmit shift register is empty, not be done when the
1549  *          transmit holding register is empty.  This functionality
1550  *          allows an RS485 driver to be written in user space.
1551  *****************************************************************************/
1552 static int get_lsr_info(struct edgeport_port *edge_port,
1553                                                 unsigned int __user *value)
1554 {
1555         unsigned int result = 0;
1556         unsigned long flags;
1557
1558         spin_lock_irqsave(&edge_port->ep_lock, flags);
1559         if (edge_port->maxTxCredits == edge_port->txCredits &&
1560             edge_port->txfifo.count == 0) {
1561                 dbg("%s -- Empty", __func__);
1562                 result = TIOCSER_TEMT;
1563         }
1564         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1565
1566         if (copy_to_user(value, &result, sizeof(int)))
1567                 return -EFAULT;
1568         return 0;
1569 }
1570
1571 static int edge_tiocmset(struct tty_struct *tty,
1572                                         unsigned int set, unsigned int clear)
1573 {
1574         struct usb_serial_port *port = tty->driver_data;
1575         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1576         unsigned int mcr;
1577
1578         dbg("%s - port %d", __func__, port->number);
1579
1580         mcr = edge_port->shadowMCR;
1581         if (set & TIOCM_RTS)
1582                 mcr |= MCR_RTS;
1583         if (set & TIOCM_DTR)
1584                 mcr |= MCR_DTR;
1585         if (set & TIOCM_LOOP)
1586                 mcr |= MCR_LOOPBACK;
1587
1588         if (clear & TIOCM_RTS)
1589                 mcr &= ~MCR_RTS;
1590         if (clear & TIOCM_DTR)
1591                 mcr &= ~MCR_DTR;
1592         if (clear & TIOCM_LOOP)
1593                 mcr &= ~MCR_LOOPBACK;
1594
1595         edge_port->shadowMCR = mcr;
1596
1597         send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
1598
1599         return 0;
1600 }
1601
1602 static int edge_tiocmget(struct tty_struct *tty)
1603 {
1604         struct usb_serial_port *port = tty->driver_data;
1605         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1606         unsigned int result = 0;
1607         unsigned int msr;
1608         unsigned int mcr;
1609
1610         dbg("%s - port %d", __func__, port->number);
1611
1612         msr = edge_port->shadowMSR;
1613         mcr = edge_port->shadowMCR;
1614         result = ((mcr & MCR_DTR)       ? TIOCM_DTR: 0)   /* 0x002 */
1615                   | ((mcr & MCR_RTS)    ? TIOCM_RTS: 0)   /* 0x004 */
1616                   | ((msr & EDGEPORT_MSR_CTS)   ? TIOCM_CTS: 0)   /* 0x020 */
1617                   | ((msr & EDGEPORT_MSR_CD)    ? TIOCM_CAR: 0)   /* 0x040 */
1618                   | ((msr & EDGEPORT_MSR_RI)    ? TIOCM_RI:  0)   /* 0x080 */
1619                   | ((msr & EDGEPORT_MSR_DSR)   ? TIOCM_DSR: 0);  /* 0x100 */
1620
1621
1622         dbg("%s -- %x", __func__, result);
1623
1624         return result;
1625 }
1626
1627 static int edge_get_icount(struct tty_struct *tty,
1628                                 struct serial_icounter_struct *icount)
1629 {
1630         struct usb_serial_port *port = tty->driver_data;
1631         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1632         struct async_icount cnow;
1633         cnow = edge_port->icount;
1634
1635         icount->cts = cnow.cts;
1636         icount->dsr = cnow.dsr;
1637         icount->rng = cnow.rng;
1638         icount->dcd = cnow.dcd;
1639         icount->rx = cnow.rx;
1640         icount->tx = cnow.tx;
1641         icount->frame = cnow.frame;
1642         icount->overrun = cnow.overrun;
1643         icount->parity = cnow.parity;
1644         icount->brk = cnow.brk;
1645         icount->buf_overrun = cnow.buf_overrun;
1646
1647         dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d",
1648                         __func__,  port->number, icount->rx, icount->tx);
1649         return 0;
1650 }
1651
1652 static int get_serial_info(struct edgeport_port *edge_port,
1653                                 struct serial_struct __user *retinfo)
1654 {
1655         struct serial_struct tmp;
1656
1657         if (!retinfo)
1658                 return -EFAULT;
1659
1660         memset(&tmp, 0, sizeof(tmp));
1661
1662         tmp.type                = PORT_16550A;
1663         tmp.line                = edge_port->port->serial->minor;
1664         tmp.port                = edge_port->port->number;
1665         tmp.irq                 = 0;
1666         tmp.flags               = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
1667         tmp.xmit_fifo_size      = edge_port->maxTxCredits;
1668         tmp.baud_base           = 9600;
1669         tmp.close_delay         = 5*HZ;
1670         tmp.closing_wait        = 30*HZ;
1671
1672         if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
1673                 return -EFAULT;
1674         return 0;
1675 }
1676
1677
1678 /*****************************************************************************
1679  * SerialIoctl
1680  *      this function handles any ioctl calls to the driver
1681  *****************************************************************************/
1682 static int edge_ioctl(struct tty_struct *tty,
1683                                         unsigned int cmd, unsigned long arg)
1684 {
1685         struct usb_serial_port *port = tty->driver_data;
1686         DEFINE_WAIT(wait);
1687         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1688         struct async_icount cnow;
1689         struct async_icount cprev;
1690
1691         dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
1692
1693         switch (cmd) {
1694         case TIOCSERGETLSR:
1695                 dbg("%s (%d) TIOCSERGETLSR", __func__,  port->number);
1696                 return get_lsr_info(edge_port, (unsigned int __user *) arg);
1697
1698         case TIOCGSERIAL:
1699                 dbg("%s (%d) TIOCGSERIAL", __func__,  port->number);
1700                 return get_serial_info(edge_port, (struct serial_struct __user *) arg);
1701
1702         case TIOCMIWAIT:
1703                 dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
1704                 cprev = edge_port->icount;
1705                 while (1) {
1706                         prepare_to_wait(&edge_port->delta_msr_wait,
1707                                                 &wait, TASK_INTERRUPTIBLE);
1708                         schedule();
1709                         finish_wait(&edge_port->delta_msr_wait, &wait);
1710                         /* see if a signal did it */
1711                         if (signal_pending(current))
1712                                 return -ERESTARTSYS;
1713                         cnow = edge_port->icount;
1714                         if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
1715                             cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
1716                                 return -EIO; /* no change => error */
1717                         if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
1718                             ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
1719                             ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
1720                             ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
1721                                 return 0;
1722                         }
1723                         cprev = cnow;
1724                 }
1725                 /* NOTREACHED */
1726                 break;
1727
1728         }
1729         return -ENOIOCTLCMD;
1730 }
1731
1732
1733 /*****************************************************************************
1734  * SerialBreak
1735  *      this function sends a break to the port
1736  *****************************************************************************/
1737 static void edge_break(struct tty_struct *tty, int break_state)
1738 {
1739         struct usb_serial_port *port = tty->driver_data;
1740         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1741         struct edgeport_serial *edge_serial = usb_get_serial_data(port->serial);
1742         int status;
1743
1744         if ((!edge_serial->is_epic) ||
1745             ((edge_serial->is_epic) &&
1746              (edge_serial->epic_descriptor.Supports.IOSPChase))) {
1747                 /* flush and chase */
1748                 edge_port->chaseResponsePending = true;
1749
1750                 dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__);
1751                 status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0);
1752                 if (status == 0) {
1753                         /* block until chase finished */
1754                         block_until_chase_response(edge_port);
1755                 } else {
1756                         edge_port->chaseResponsePending = false;
1757                 }
1758         }
1759
1760         if ((!edge_serial->is_epic) ||
1761             ((edge_serial->is_epic) &&
1762              (edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) {
1763                 if (break_state == -1) {
1764                         dbg("%s - Sending IOSP_CMD_SET_BREAK", __func__);
1765                         status = send_iosp_ext_cmd(edge_port,
1766                                                 IOSP_CMD_SET_BREAK, 0);
1767                 } else {
1768                         dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __func__);
1769                         status = send_iosp_ext_cmd(edge_port,
1770                                                 IOSP_CMD_CLEAR_BREAK, 0);
1771                 }
1772                 if (status)
1773                         dbg("%s - error sending break set/clear command.",
1774                                 __func__);
1775         }
1776 }
1777
1778
1779 /*****************************************************************************
1780  * process_rcvd_data
1781  *      this function handles the data received on the bulk in pipe.
1782  *****************************************************************************/
1783 static void process_rcvd_data(struct edgeport_serial *edge_serial,
1784                                 unsigned char *buffer, __u16 bufferLength)
1785 {
1786         struct usb_serial_port *port;
1787         struct edgeport_port *edge_port;
1788         struct tty_struct *tty;
1789         __u16 lastBufferLength;
1790         __u16 rxLen;
1791
1792         dbg("%s", __func__);
1793
1794         lastBufferLength = bufferLength + 1;
1795
1796         while (bufferLength > 0) {
1797                 /* failsafe incase we get a message that we don't understand */
1798                 if (lastBufferLength == bufferLength) {
1799                         dbg("%s - stuck in loop, exiting it.", __func__);
1800                         break;
1801                 }
1802                 lastBufferLength = bufferLength;
1803
1804                 switch (edge_serial->rxState) {
1805                 case EXPECT_HDR1:
1806                         edge_serial->rxHeader1 = *buffer;
1807                         ++buffer;
1808                         --bufferLength;
1809
1810                         if (bufferLength == 0) {
1811                                 edge_serial->rxState = EXPECT_HDR2;
1812                                 break;
1813                         }
1814                         /* otherwise, drop on through */
1815                 case EXPECT_HDR2:
1816                         edge_serial->rxHeader2 = *buffer;
1817                         ++buffer;
1818                         --bufferLength;
1819
1820                         dbg("%s - Hdr1=%02X Hdr2=%02X", __func__,
1821                             edge_serial->rxHeader1, edge_serial->rxHeader2);
1822                         /* Process depending on whether this header is
1823                          * data or status */
1824
1825                         if (IS_CMD_STAT_HDR(edge_serial->rxHeader1)) {
1826                                 /* Decode this status header and go to
1827                                  * EXPECT_HDR1 (if we can process the status
1828                                  * with only 2 bytes), or go to EXPECT_HDR3 to
1829                                  * get the third byte. */
1830                                 edge_serial->rxPort =
1831                                     IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
1832                                 edge_serial->rxStatusCode =
1833                                     IOSP_GET_STATUS_CODE(
1834                                                 edge_serial->rxHeader1);
1835
1836                                 if (!IOSP_STATUS_IS_2BYTE(
1837                                                 edge_serial->rxStatusCode)) {
1838                                         /* This status needs additional bytes.
1839                                          * Save what we have and then wait for
1840                                          * more data.
1841                                          */
1842                                         edge_serial->rxStatusParam
1843                                                 = edge_serial->rxHeader2;
1844                                         edge_serial->rxState = EXPECT_HDR3;
1845                                         break;
1846                                 }
1847                                 /* We have all the header bytes, process the
1848                                    status now */
1849                                 process_rcvd_status(edge_serial,
1850                                                 edge_serial->rxHeader2, 0);
1851                                 edge_serial->rxState = EXPECT_HDR1;
1852                                 break;
1853                         } else {
1854                                 edge_serial->rxPort =
1855                                     IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
1856                                 edge_serial->rxBytesRemaining =
1857                                     IOSP_GET_HDR_DATA_LEN(
1858                                                 edge_serial->rxHeader1,
1859                                                 edge_serial->rxHeader2);
1860                                 dbg("%s - Data for Port %u Len %u",
1861                                                 __func__,
1862                                                 edge_serial->rxPort,
1863                                                 edge_serial->rxBytesRemaining);
1864
1865                                 /* ASSERT(DevExt->RxPort < DevExt->NumPorts);
1866                                  * ASSERT(DevExt->RxBytesRemaining <
1867                                  *              IOSP_MAX_DATA_LENGTH);
1868                                  */
1869
1870                                 if (bufferLength == 0) {
1871                                         edge_serial->rxState = EXPECT_DATA;
1872                                         break;
1873                                 }
1874                                 /* Else, drop through */
1875                         }
1876                 case EXPECT_DATA: /* Expect data */
1877                         if (bufferLength < edge_serial->rxBytesRemaining) {
1878                                 rxLen = bufferLength;
1879                                 /* Expect data to start next buffer */
1880                                 edge_serial->rxState = EXPECT_DATA;
1881                         } else {
1882                                 /* BufLen >= RxBytesRemaining */
1883                                 rxLen = edge_serial->rxBytesRemaining;
1884                                 /* Start another header next time */
1885                                 edge_serial->rxState = EXPECT_HDR1;
1886                         }
1887
1888                         bufferLength -= rxLen;
1889                         edge_serial->rxBytesRemaining -= rxLen;
1890
1891                         /* spit this data back into the tty driver if this
1892                            port is open */
1893                         if (rxLen) {
1894                                 port = edge_serial->serial->port[
1895                                                         edge_serial->rxPort];
1896                                 edge_port = usb_get_serial_port_data(port);
1897                                 if (edge_port->open) {
1898                                         tty = tty_port_tty_get(
1899                                                 &edge_port->port->port);
1900                                         if (tty) {
1901                                                 dbg("%s - Sending %d bytes to TTY for port %d",
1902                                                         __func__, rxLen, edge_serial->rxPort);
1903                                                 edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen);
1904                                                 tty_kref_put(tty);
1905                                         }
1906                                         edge_port->icount.rx += rxLen;
1907                                 }
1908                                 buffer += rxLen;
1909                         }
1910                         break;
1911
1912                 case EXPECT_HDR3:       /* Expect 3rd byte of status header */
1913                         edge_serial->rxHeader3 = *buffer;
1914                         ++buffer;
1915                         --bufferLength;
1916
1917                         /* We have all the header bytes, process the
1918                            status now */
1919                         process_rcvd_status(edge_serial,
1920                                 edge_serial->rxStatusParam,
1921                                 edge_serial->rxHeader3);
1922                         edge_serial->rxState = EXPECT_HDR1;
1923                         break;
1924                 }
1925         }
1926 }
1927
1928
1929 /*****************************************************************************
1930  * process_rcvd_status
1931  *      this function handles the any status messages received on the
1932  *      bulk in pipe.
1933  *****************************************************************************/
1934 static void process_rcvd_status(struct edgeport_serial *edge_serial,
1935                                                 __u8 byte2, __u8 byte3)
1936 {
1937         struct usb_serial_port *port;
1938         struct edgeport_port *edge_port;
1939         struct tty_struct *tty;
1940         __u8 code = edge_serial->rxStatusCode;
1941
1942         /* switch the port pointer to the one being currently talked about */
1943         port = edge_serial->serial->port[edge_serial->rxPort];
1944         edge_port = usb_get_serial_port_data(port);
1945         if (edge_port == NULL) {
1946                 dev_err(&edge_serial->serial->dev->dev,
1947                         "%s - edge_port == NULL for port %d\n",
1948                                         __func__, edge_serial->rxPort);
1949                 return;
1950         }
1951
1952         dbg("%s - port %d", __func__, edge_serial->rxPort);
1953
1954         if (code == IOSP_EXT_STATUS) {
1955                 switch (byte2) {
1956                 case IOSP_EXT_STATUS_CHASE_RSP:
1957                         /* we want to do EXT status regardless of port
1958                          * open/closed */
1959                         dbg("%s - Port %u EXT CHASE_RSP Data = %02x",
1960                                         __func__, edge_serial->rxPort, byte3);
1961                         /* Currently, the only EXT_STATUS is Chase, so process
1962                          * here instead of one more call to one more subroutine
1963                          * If/when more EXT_STATUS, there'll be more work to do
1964                          * Also, we currently clear flag and close the port
1965                          * regardless of content of above's Byte3.
1966                          * We could choose to do something else when Byte3 says
1967                          * Timeout on Chase from Edgeport, like wait longer in
1968                          * block_until_chase_response, but for now we don't.
1969                          */
1970                         edge_port->chaseResponsePending = false;
1971                         wake_up(&edge_port->wait_chase);
1972                         return;
1973
1974                 case IOSP_EXT_STATUS_RX_CHECK_RSP:
1975                         dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============", __func__, edge_serial->rxPort, byte3);
1976                         /* Port->RxCheckRsp = true; */
1977                         return;
1978                 }
1979         }
1980
1981         if (code == IOSP_STATUS_OPEN_RSP) {
1982                 edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3);
1983                 edge_port->maxTxCredits = edge_port->txCredits;
1984                 dbg("%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
1985                 handle_new_msr(edge_port, byte2);
1986
1987                 /* send the current line settings to the port so we are
1988                    in sync with any further termios calls */
1989                 tty = tty_port_tty_get(&edge_port->port->port);
1990                 if (tty) {
1991                         change_port_settings(tty,
1992                                 edge_port, tty->termios);
1993                         tty_kref_put(tty);
1994                 }
1995
1996                 /* we have completed the open */
1997                 edge_port->openPending = false;
1998                 edge_port->open = true;
1999                 wake_up(&edge_port->wait_open);
2000                 return;
2001         }
2002
2003         /* If port is closed, silently discard all rcvd status. We can
2004          * have cases where buffered status is received AFTER the close
2005          * port command is sent to the Edgeport.
2006          */
2007         if (!edge_port->open || edge_port->closePending)
2008                 return;
2009
2010         switch (code) {
2011         /* Not currently sent by Edgeport */
2012         case IOSP_STATUS_LSR:
2013                 dbg("%s - Port %u LSR Status = %02x",
2014                                         __func__, edge_serial->rxPort, byte2);
2015                 handle_new_lsr(edge_port, false, byte2, 0);
2016                 break;
2017
2018         case IOSP_STATUS_LSR_DATA:
2019                 dbg("%s - Port %u LSR Status = %02x, Data = %02x",
2020                                 __func__, edge_serial->rxPort, byte2, byte3);
2021                 /* byte2 is LSR Register */
2022                 /* byte3 is broken data byte */
2023                 handle_new_lsr(edge_port, true, byte2, byte3);
2024                 break;
2025         /*
2026          *      case IOSP_EXT_4_STATUS:
2027          *              dbg("%s - Port %u LSR Status = %02x Data = %02x",
2028          *                      __func__, edge_serial->rxPort, byte2, byte3);
2029          *              break;
2030          */
2031         case IOSP_STATUS_MSR:
2032                 dbg("%s - Port %u MSR Status = %02x",
2033                                         __func__, edge_serial->rxPort, byte2);
2034                 /*
2035                  * Process this new modem status and generate appropriate
2036                  * events, etc, based on the new status. This routine
2037                  * also saves the MSR in Port->ShadowMsr.
2038                  */
2039                 handle_new_msr(edge_port, byte2);
2040                 break;
2041
2042         default:
2043                 dbg("%s - Unrecognized IOSP status code %u", __func__, code);
2044                 break;
2045         }
2046 }
2047
2048
2049 /*****************************************************************************
2050  * edge_tty_recv
2051  *      this function passes data on to the tty flip buffer
2052  *****************************************************************************/
2053 static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
2054                                         unsigned char *data, int length)
2055 {
2056         int cnt;
2057
2058         cnt = tty_insert_flip_string(tty, data, length);
2059         if (cnt < length) {
2060                 dev_err(dev, "%s - dropping data, %d bytes lost\n",
2061                                 __func__, length - cnt);
2062         }
2063         data += cnt;
2064         length -= cnt;
2065
2066         tty_flip_buffer_push(tty);
2067 }
2068
2069
2070 /*****************************************************************************
2071  * handle_new_msr
2072  *      this function handles any change to the msr register for a port.
2073  *****************************************************************************/
2074 static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr)
2075 {
2076         struct  async_icount *icount;
2077
2078         dbg("%s %02x", __func__, newMsr);
2079
2080         if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR |
2081                         EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
2082                 icount = &edge_port->icount;
2083
2084                 /* update input line counters */
2085                 if (newMsr & EDGEPORT_MSR_DELTA_CTS)
2086                         icount->cts++;
2087                 if (newMsr & EDGEPORT_MSR_DELTA_DSR)
2088                         icount->dsr++;
2089                 if (newMsr & EDGEPORT_MSR_DELTA_CD)
2090                         icount->dcd++;
2091                 if (newMsr & EDGEPORT_MSR_DELTA_RI)
2092                         icount->rng++;
2093                 wake_up_interruptible(&edge_port->delta_msr_wait);
2094         }
2095
2096         /* Save the new modem status */
2097         edge_port->shadowMSR = newMsr & 0xf0;
2098 }
2099
2100
2101 /*****************************************************************************
2102  * handle_new_lsr
2103  *      this function handles any change to the lsr register for a port.
2104  *****************************************************************************/
2105 static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
2106                                                         __u8 lsr, __u8 data)
2107 {
2108         __u8 newLsr = (__u8) (lsr & (__u8)
2109                 (LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK));
2110         struct async_icount *icount;
2111
2112         dbg("%s - %02x", __func__, newLsr);
2113
2114         edge_port->shadowLSR = lsr;
2115
2116         if (newLsr & LSR_BREAK) {
2117                 /*
2118                  * Parity and Framing errors only count if they
2119                  * occur exclusive of a break being
2120                  * received.
2121                  */
2122                 newLsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK);
2123         }
2124
2125         /* Place LSR data byte into Rx buffer */
2126         if (lsrData) {
2127                 struct tty_struct *tty =
2128                                 tty_port_tty_get(&edge_port->port->port);
2129                 if (tty) {
2130                         edge_tty_recv(&edge_port->port->dev, tty, &data, 1);
2131                         tty_kref_put(tty);
2132                 }
2133         }
2134         /* update input line counters */
2135         icount = &edge_port->icount;
2136         if (newLsr & LSR_BREAK)
2137                 icount->brk++;
2138         if (newLsr & LSR_OVER_ERR)
2139                 icount->overrun++;
2140         if (newLsr & LSR_PAR_ERR)
2141                 icount->parity++;
2142         if (newLsr & LSR_FRM_ERR)
2143                 icount->frame++;
2144 }
2145
2146
2147 /****************************************************************************
2148  * sram_write
2149  *      writes a number of bytes to the Edgeport device's sram starting at the
2150  *      given address.
2151  *      If successful returns the number of bytes written, otherwise it returns
2152  *      a negative error number of the problem.
2153  ****************************************************************************/
2154 static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
2155                                         __u16 length, const __u8 *data)
2156 {
2157         int result;
2158         __u16 current_length;
2159         unsigned char *transfer_buffer;
2160
2161         dbg("%s - %x, %x, %d", __func__, extAddr, addr, length);
2162
2163         transfer_buffer =  kmalloc(64, GFP_KERNEL);
2164         if (!transfer_buffer) {
2165                 dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n",
2166                                                         __func__, 64);
2167                 return -ENOMEM;
2168         }
2169
2170         /* need to split these writes up into 64 byte chunks */
2171         result = 0;
2172         while (length > 0) {
2173                 if (length > 64)
2174                         current_length = 64;
2175                 else
2176                         current_length = length;
2177
2178 /*              dbg("%s - writing %x, %x, %d", __func__,
2179                                         extAddr, addr, current_length); */
2180                 memcpy(transfer_buffer, data, current_length);
2181                 result = usb_control_msg(serial->dev,
2182                                         usb_sndctrlpipe(serial->dev, 0),
2183                                         USB_REQUEST_ION_WRITE_RAM,
2184                                         0x40, addr, extAddr, transfer_buffer,
2185                                         current_length, 300);
2186                 if (result < 0)
2187                         break;
2188                 length -= current_length;
2189                 addr += current_length;
2190                 data += current_length;
2191         }
2192
2193         kfree(transfer_buffer);
2194         return result;
2195 }
2196
2197
2198 /****************************************************************************
2199  * rom_write
2200  *      writes a number of bytes to the Edgeport device's ROM starting at the
2201  *      given address.
2202  *      If successful returns the number of bytes written, otherwise it returns
2203  *      a negative error number of the problem.
2204  ****************************************************************************/
2205 static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
2206                                         __u16 length, const __u8 *data)
2207 {
2208         int result;
2209         __u16 current_length;
2210         unsigned char *transfer_buffer;
2211
2212 /*      dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); */
2213
2214         transfer_buffer =  kmalloc(64, GFP_KERNEL);
2215         if (!transfer_buffer) {
2216                 dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n",
2217                                                                 __func__, 64);
2218                 return -ENOMEM;
2219         }
2220
2221         /* need to split these writes up into 64 byte chunks */
2222         result = 0;
2223         while (length > 0) {
2224                 if (length > 64)
2225                         current_length = 64;
2226                 else
2227                         current_length = length;
2228 /*              dbg("%s - writing %x, %x, %d", __func__,
2229                                         extAddr, addr, current_length); */
2230                 memcpy(transfer_buffer, data, current_length);
2231                 result = usb_control_msg(serial->dev,
2232                                         usb_sndctrlpipe(serial->dev, 0),
2233                                         USB_REQUEST_ION_WRITE_ROM, 0x40,
2234                                         addr, extAddr,
2235                                         transfer_buffer, current_length, 300);
2236                 if (result < 0)
2237                         break;
2238                 length -= current_length;
2239                 addr += current_length;
2240                 data += current_length;
2241         }
2242
2243         kfree(transfer_buffer);
2244         return result;
2245 }
2246
2247
2248 /****************************************************************************
2249  * rom_read
2250  *      reads a number of bytes from the Edgeport device starting at the given
2251  *      address.
2252  *      If successful returns the number of bytes read, otherwise it returns
2253  *      a negative error number of the problem.
2254  ****************************************************************************/
2255 static int rom_read(struct usb_serial *serial, __u16 extAddr,
2256                                         __u16 addr, __u16 length, __u8 *data)
2257 {
2258         int result;
2259         __u16 current_length;
2260         unsigned char *transfer_buffer;
2261
2262         dbg("%s - %x, %x, %d", __func__, extAddr, addr, length);
2263
2264         transfer_buffer =  kmalloc(64, GFP_KERNEL);
2265         if (!transfer_buffer) {
2266                 dev_err(&serial->dev->dev,
2267                         "%s - kmalloc(%d) failed.\n", __func__, 64);
2268                 return -ENOMEM;
2269         }
2270
2271         /* need to split these reads up into 64 byte chunks */
2272         result = 0;
2273         while (length > 0) {
2274                 if (length > 64)
2275                         current_length = 64;
2276                 else
2277                         current_length = length;
2278 /*              dbg("%s - %x, %x, %d", __func__,
2279                                 extAddr, addr, current_length); */
2280                 result = usb_control_msg(serial->dev,
2281                                         usb_rcvctrlpipe(serial->dev, 0),
2282                                         USB_REQUEST_ION_READ_ROM,
2283                                         0xC0, addr, extAddr, transfer_buffer,
2284                                         current_length, 300);
2285                 if (result < 0)
2286                         break;
2287                 memcpy(data, transfer_buffer, current_length);
2288                 length -= current_length;
2289                 addr += current_length;
2290                 data += current_length;
2291         }
2292
2293         kfree(transfer_buffer);
2294         return result;
2295 }
2296
2297
2298 /****************************************************************************
2299  * send_iosp_ext_cmd
2300  *      Is used to send a IOSP message to the Edgeport device
2301  ****************************************************************************/
2302 static int send_iosp_ext_cmd(struct edgeport_port *edge_port,
2303                                                 __u8 command, __u8 param)
2304 {
2305         unsigned char   *buffer;
2306         unsigned char   *currentCommand;
2307         int             length = 0;
2308         int             status = 0;
2309
2310         dbg("%s - %d, %d", __func__, command, param);
2311
2312         buffer = kmalloc(10, GFP_ATOMIC);
2313         if (!buffer) {
2314                 dev_err(&edge_port->port->dev,
2315                                 "%s - kmalloc(%d) failed.\n", __func__, 10);
2316                 return -ENOMEM;
2317         }
2318
2319         currentCommand = buffer;
2320
2321         MAKE_CMD_EXT_CMD(&currentCommand, &length,
2322                 edge_port->port->number - edge_port->port->serial->minor,
2323                 command, param);
2324
2325         status = write_cmd_usb(edge_port, buffer, length);
2326         if (status) {
2327                 /* something bad happened, let's free up the memory */
2328                 kfree(buffer);
2329         }
2330
2331         return status;
2332 }
2333
2334
2335 /*****************************************************************************
2336  * write_cmd_usb
2337  *      this function writes the given buffer out to the bulk write endpoint.
2338  *****************************************************************************/
2339 static int write_cmd_usb(struct edgeport_port *edge_port,
2340                                         unsigned char *buffer, int length)
2341 {
2342         struct edgeport_serial *edge_serial =
2343                                 usb_get_serial_data(edge_port->port->serial);
2344         int status = 0;
2345         struct urb *urb;
2346
2347         usb_serial_debug_data(debug, &edge_port->port->dev,
2348                                                 __func__, length, buffer);
2349
2350         /* Allocate our next urb */
2351         urb = usb_alloc_urb(0, GFP_ATOMIC);
2352         if (!urb)
2353                 return -ENOMEM;
2354
2355         atomic_inc(&CmdUrbs);
2356         dbg("%s - ALLOCATE URB %p (outstanding %d)",
2357                                 __func__, urb, atomic_read(&CmdUrbs));
2358
2359         usb_fill_bulk_urb(urb, edge_serial->serial->dev,
2360                         usb_sndbulkpipe(edge_serial->serial->dev,
2361                                         edge_serial->bulk_out_endpoint),
2362                         buffer, length, edge_bulk_out_cmd_callback, edge_port);
2363
2364         edge_port->commandPending = true;
2365         status = usb_submit_urb(urb, GFP_ATOMIC);
2366
2367         if (status) {
2368                 /* something went wrong */
2369                 dev_err(&edge_port->port->dev,
2370                     "%s - usb_submit_urb(write command) failed, status = %d\n",
2371                                                         __func__, status);
2372                 usb_kill_urb(urb);
2373                 usb_free_urb(urb);
2374                 atomic_dec(&CmdUrbs);
2375                 return status;
2376         }
2377
2378 #if 0
2379         wait_event(&edge_port->wait_command, !edge_port->commandPending);
2380
2381         if (edge_port->commandPending) {
2382                 /* command timed out */
2383                 dbg("%s - command timed out", __func__);
2384                 status = -EINVAL;
2385         }
2386 #endif
2387         return status;
2388 }
2389
2390
2391 /*****************************************************************************
2392  * send_cmd_write_baud_rate
2393  *      this function sends the proper command to change the baud rate of the
2394  *      specified port.
2395  *****************************************************************************/
2396 static int send_cmd_write_baud_rate(struct edgeport_port *edge_port,
2397                                                                 int baudRate)
2398 {
2399         struct edgeport_serial *edge_serial =
2400                                 usb_get_serial_data(edge_port->port->serial);
2401         unsigned char *cmdBuffer;
2402         unsigned char *currCmd;
2403         int cmdLen = 0;
2404         int divisor;
2405         int status;
2406         unsigned char number =
2407                 edge_port->port->number - edge_port->port->serial->minor;
2408
2409         if (edge_serial->is_epic &&
2410             !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) {
2411                 dbg("SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d",
2412                     edge_port->port->number, baudRate);
2413                 return 0;
2414         }
2415
2416         dbg("%s - port = %d, baud = %d", __func__,
2417                                         edge_port->port->number, baudRate);
2418
2419         status = calc_baud_rate_divisor(baudRate, &divisor);
2420         if (status) {
2421                 dev_err(&edge_port->port->dev, "%s - bad baud rate\n",
2422                                                                 __func__);
2423                 return status;
2424         }
2425
2426         /* Alloc memory for the string of commands. */
2427         cmdBuffer =  kmalloc(0x100, GFP_ATOMIC);
2428         if (!cmdBuffer) {
2429                 dev_err(&edge_port->port->dev,
2430                         "%s - kmalloc(%d) failed.\n", __func__, 0x100);
2431                 return -ENOMEM;
2432         }
2433         currCmd = cmdBuffer;
2434
2435         /* Enable access to divisor latch */
2436         MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR, LCR_DL_ENABLE);
2437
2438         /* Write the divisor itself */
2439         MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLL, LOW8(divisor));
2440         MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLM, HIGH8(divisor));
2441
2442         /* Restore original value to disable access to divisor latch */
2443         MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR,
2444                                                 edge_port->shadowLCR);
2445
2446         status = write_cmd_usb(edge_port, cmdBuffer, cmdLen);
2447         if (status) {
2448                 /* something bad happened, let's free up the memory */
2449                 kfree(cmdBuffer);
2450         }
2451
2452         return status;
2453 }
2454
2455
2456 /*****************************************************************************
2457  * calc_baud_rate_divisor
2458  *      this function calculates the proper baud rate divisor for the specified
2459  *      baud rate.
2460  *****************************************************************************/
2461 static int calc_baud_rate_divisor(int baudrate, int *divisor)
2462 {
2463         int i;
2464         __u16 custom;
2465
2466
2467         dbg("%s - %d", __func__, baudrate);
2468
2469         for (i = 0; i < ARRAY_SIZE(divisor_table); i++) {
2470                 if (divisor_table[i].BaudRate == baudrate) {
2471                         *divisor = divisor_table[i].Divisor;
2472                         return 0;
2473                 }
2474         }
2475
2476         /* We have tried all of the standard baud rates
2477          * lets try to calculate the divisor for this baud rate
2478          * Make sure the baud rate is reasonable */
2479         if (baudrate > 50 && baudrate < 230400) {
2480                 /* get divisor */
2481                 custom = (__u16)((230400L + baudrate/2) / baudrate);
2482
2483                 *divisor = custom;
2484
2485                 dbg("%s - Baud %d = %d", __func__, baudrate, custom);
2486                 return 0;
2487         }
2488
2489         return -1;
2490 }
2491
2492
2493 /*****************************************************************************
2494  * send_cmd_write_uart_register
2495  *  this function builds up a uart register message and sends to the device.
2496  *****************************************************************************/
2497 static int send_cmd_write_uart_register(struct edgeport_port *edge_port,
2498                                                 __u8 regNum, __u8 regValue)
2499 {
2500         struct edgeport_serial *edge_serial =
2501                                 usb_get_serial_data(edge_port->port->serial);
2502         unsigned char *cmdBuffer;
2503         unsigned char *currCmd;
2504         unsigned long cmdLen = 0;
2505         int status;
2506
2507         dbg("%s - write to %s register 0x%02x",
2508                         (regNum == MCR) ? "MCR" : "LCR", __func__, regValue);
2509
2510         if (edge_serial->is_epic &&
2511             !edge_serial->epic_descriptor.Supports.IOSPWriteMCR &&
2512             regNum == MCR) {
2513                 dbg("SendCmdWriteUartReg - Not writing to MCR Register");
2514                 return 0;
2515         }
2516
2517         if (edge_serial->is_epic &&
2518             !edge_serial->epic_descriptor.Supports.IOSPWriteLCR &&
2519             regNum == LCR) {
2520                 dbg("SendCmdWriteUartReg - Not writing to LCR Register");
2521                 return 0;
2522         }
2523
2524         /* Alloc memory for the string of commands. */
2525         cmdBuffer = kmalloc(0x10, GFP_ATOMIC);
2526         if (cmdBuffer == NULL)
2527                 return -ENOMEM;
2528
2529         currCmd = cmdBuffer;
2530
2531         /* Build a cmd in the buffer to write the given register */
2532         MAKE_CMD_WRITE_REG(&currCmd, &cmdLen,
2533                 edge_port->port->number - edge_port->port->serial->minor,
2534                 regNum, regValue);
2535
2536         status = write_cmd_usb(edge_port, cmdBuffer, cmdLen);
2537         if (status) {
2538                 /* something bad happened, let's free up the memory */
2539                 kfree(cmdBuffer);
2540         }
2541
2542         return status;
2543 }
2544
2545
2546 /*****************************************************************************
2547  * change_port_settings
2548  *      This routine is called to set the UART on the device to match the
2549  *      specified new settings.
2550  *****************************************************************************/
2551
2552 static void change_port_settings(struct tty_struct *tty,
2553         struct edgeport_port *edge_port, struct ktermios *old_termios)
2554 {
2555         struct edgeport_serial *edge_serial =
2556                         usb_get_serial_data(edge_port->port->serial);
2557         int baud;
2558         unsigned cflag;
2559         __u8 mask = 0xff;
2560         __u8 lData;
2561         __u8 lParity;
2562         __u8 lStop;
2563         __u8 rxFlow;
2564         __u8 txFlow;
2565         int status;
2566
2567         dbg("%s - port %d", __func__, edge_port->port->number);
2568
2569         if (!edge_port->open &&
2570             !edge_port->openPending) {
2571                 dbg("%s - port not opened", __func__);
2572                 return;
2573         }
2574
2575         cflag = tty->termios->c_cflag;
2576
2577         switch (cflag & CSIZE) {
2578         case CS5:
2579                 lData = LCR_BITS_5; mask = 0x1f;
2580                 dbg("%s - data bits = 5", __func__);
2581                 break;
2582         case CS6:
2583                 lData = LCR_BITS_6; mask = 0x3f;
2584                 dbg("%s - data bits = 6", __func__);
2585                 break;
2586         case CS7:
2587                 lData = LCR_BITS_7; mask = 0x7f;
2588                 dbg("%s - data bits = 7", __func__);
2589                 break;
2590         default:
2591         case CS8:
2592                 lData = LCR_BITS_8;
2593                 dbg("%s - data bits = 8", __func__);
2594                 break;
2595         }
2596
2597         lParity = LCR_PAR_NONE;
2598         if (cflag & PARENB) {
2599                 if (cflag & CMSPAR) {
2600                         if (cflag & PARODD) {
2601                                 lParity = LCR_PAR_MARK;
2602                                 dbg("%s - parity = mark", __func__);
2603                         } else {
2604                                 lParity = LCR_PAR_SPACE;
2605                                 dbg("%s - parity = space", __func__);
2606                         }
2607                 } else if (cflag & PARODD) {
2608                         lParity = LCR_PAR_ODD;
2609                         dbg("%s - parity = odd", __func__);
2610                 } else {
2611                         lParity = LCR_PAR_EVEN;
2612                         dbg("%s - parity = even", __func__);
2613                 }
2614         } else {
2615                 dbg("%s - parity = none", __func__);
2616         }
2617
2618         if (cflag & CSTOPB) {
2619                 lStop = LCR_STOP_2;
2620                 dbg("%s - stop bits = 2", __func__);
2621         } else {
2622                 lStop = LCR_STOP_1;
2623                 dbg("%s - stop bits = 1", __func__);
2624         }
2625
2626         /* figure out the flow control settings */
2627         rxFlow = txFlow = 0x00;
2628         if (cflag & CRTSCTS) {
2629                 rxFlow |= IOSP_RX_FLOW_RTS;
2630                 txFlow |= IOSP_TX_FLOW_CTS;
2631                 dbg("%s - RTS/CTS is enabled", __func__);
2632         } else {
2633                 dbg("%s - RTS/CTS is disabled", __func__);
2634         }
2635
2636         /* if we are implementing XON/XOFF, set the start and stop character
2637            in the device */
2638         if (I_IXOFF(tty) || I_IXON(tty)) {
2639                 unsigned char stop_char  = STOP_CHAR(tty);
2640                 unsigned char start_char = START_CHAR(tty);
2641
2642                 if ((!edge_serial->is_epic) ||
2643                     ((edge_serial->is_epic) &&
2644                      (edge_serial->epic_descriptor.Supports.IOSPSetXChar))) {
2645                         send_iosp_ext_cmd(edge_port,
2646                                         IOSP_CMD_SET_XON_CHAR, start_char);
2647                         send_iosp_ext_cmd(edge_port,
2648                                         IOSP_CMD_SET_XOFF_CHAR, stop_char);
2649                 }
2650
2651                 /* if we are implementing INBOUND XON/XOFF */
2652                 if (I_IXOFF(tty)) {
2653                         rxFlow |= IOSP_RX_FLOW_XON_XOFF;
2654                         dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
2655                                         __func__, start_char, stop_char);
2656                 } else {
2657                         dbg("%s - INBOUND XON/XOFF is disabled", __func__);
2658                 }
2659
2660                 /* if we are implementing OUTBOUND XON/XOFF */
2661                 if (I_IXON(tty)) {
2662                         txFlow |= IOSP_TX_FLOW_XON_XOFF;
2663                         dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
2664                                         __func__, start_char, stop_char);
2665                 } else {
2666                         dbg("%s - OUTBOUND XON/XOFF is disabled", __func__);
2667                 }
2668         }
2669
2670         /* Set flow control to the configured value */
2671         if ((!edge_serial->is_epic) ||
2672             ((edge_serial->is_epic) &&
2673              (edge_serial->epic_descriptor.Supports.IOSPSetRxFlow)))
2674                 send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_RX_FLOW, rxFlow);
2675         if ((!edge_serial->is_epic) ||
2676             ((edge_serial->is_epic) &&
2677              (edge_serial->epic_descriptor.Supports.IOSPSetTxFlow)))
2678                 send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_TX_FLOW, txFlow);
2679
2680
2681         edge_port->shadowLCR &= ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
2682         edge_port->shadowLCR |= (lData | lParity | lStop);
2683
2684         edge_port->validDataMask = mask;
2685
2686         /* Send the updated LCR value to the EdgePort */
2687         status = send_cmd_write_uart_register(edge_port, LCR,
2688                                                         edge_port->shadowLCR);
2689         if (status != 0)
2690                 return;
2691
2692         /* set up the MCR register and send it to the EdgePort */
2693         edge_port->shadowMCR = MCR_MASTER_IE;
2694         if (cflag & CBAUD)
2695                 edge_port->shadowMCR |= (MCR_DTR | MCR_RTS);
2696
2697         status = send_cmd_write_uart_register(edge_port, MCR,
2698                                                 edge_port->shadowMCR);
2699         if (status != 0)
2700                 return;
2701
2702         /* Determine divisor based on baud rate */
2703         baud = tty_get_baud_rate(tty);
2704         if (!baud) {
2705                 /* pick a default, any default... */
2706                 baud = 9600;
2707         }
2708
2709         dbg("%s - baud rate = %d", __func__, baud);
2710         status = send_cmd_write_baud_rate(edge_port, baud);
2711         if (status == -1) {
2712                 /* Speed change was not possible - put back the old speed */
2713                 baud = tty_termios_baud_rate(old_termios);
2714                 tty_encode_baud_rate(tty, baud, baud);
2715         }
2716 }
2717
2718
2719 /****************************************************************************
2720  * unicode_to_ascii
2721  *      Turns a string from Unicode into ASCII.
2722  *      Doesn't do a good job with any characters that are outside the normal
2723  *      ASCII range, but it's only for debugging...
2724  *      NOTE: expects the unicode in LE format
2725  ****************************************************************************/
2726 static void unicode_to_ascii(char *string, int buflen,
2727                                         __le16 *unicode, int unicode_size)
2728 {
2729         int i;
2730
2731         if (buflen <= 0)        /* never happens, but... */
2732                 return;
2733         --buflen;               /* space for nul */
2734
2735         for (i = 0; i < unicode_size; i++) {
2736                 if (i >= buflen)
2737                         break;
2738                 string[i] = (char)(le16_to_cpu(unicode[i]));
2739         }
2740         string[i] = 0x00;
2741 }
2742
2743
2744 /****************************************************************************
2745  * get_manufacturing_desc
2746  *      reads in the manufacturing descriptor and stores it into the serial
2747  *      structure.
2748  ****************************************************************************/
2749 static void get_manufacturing_desc(struct edgeport_serial *edge_serial)
2750 {
2751         int response;
2752
2753         dbg("getting manufacturer descriptor");
2754
2755         response = rom_read(edge_serial->serial,
2756                                 (EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16,
2757                                 (__u16)(EDGE_MANUF_DESC_ADDR & 0x0000ffff),
2758                                 EDGE_MANUF_DESC_LEN,
2759                                 (__u8 *)(&edge_serial->manuf_descriptor));
2760
2761         if (response < 1)
2762                 dev_err(&edge_serial->serial->dev->dev,
2763                         "error in getting manufacturer descriptor\n");
2764         else {
2765                 char string[30];
2766                 dbg("**Manufacturer Descriptor");
2767                 dbg("  RomSize:        %dK",
2768                         edge_serial->manuf_descriptor.RomSize);
2769                 dbg("  RamSize:        %dK",
2770                         edge_serial->manuf_descriptor.RamSize);
2771                 dbg("  CpuRev:         %d",
2772                         edge_serial->manuf_descriptor.CpuRev);
2773                 dbg("  BoardRev:       %d",
2774                         edge_serial->manuf_descriptor.BoardRev);
2775                 dbg("  NumPorts:       %d",
2776                         edge_serial->manuf_descriptor.NumPorts);
2777                 dbg("  DescDate:       %d/%d/%d",
2778                         edge_serial->manuf_descriptor.DescDate[0],
2779                         edge_serial->manuf_descriptor.DescDate[1],
2780                         edge_serial->manuf_descriptor.DescDate[2]+1900);
2781                 unicode_to_ascii(string, sizeof(string),
2782                         edge_serial->manuf_descriptor.SerialNumber,
2783                         edge_serial->manuf_descriptor.SerNumLength/2);
2784                 dbg("  SerialNumber: %s", string);
2785                 unicode_to_ascii(string, sizeof(string),
2786                         edge_serial->manuf_descriptor.AssemblyNumber,
2787                         edge_serial->manuf_descriptor.AssemblyNumLength/2);
2788                 dbg("  AssemblyNumber: %s", string);
2789                 unicode_to_ascii(string, sizeof(string),
2790                     edge_serial->manuf_descriptor.OemAssyNumber,
2791                     edge_serial->manuf_descriptor.OemAssyNumLength/2);
2792                 dbg("  OemAssyNumber:  %s", string);
2793                 dbg("  UartType:       %d",
2794                         edge_serial->manuf_descriptor.UartType);
2795                 dbg("  IonPid:         %d",
2796                         edge_serial->manuf_descriptor.IonPid);
2797                 dbg("  IonConfig:      %d",
2798                         edge_serial->manuf_descriptor.IonConfig);
2799         }
2800 }
2801
2802
2803 /****************************************************************************
2804  * get_boot_desc
2805  *      reads in the bootloader descriptor and stores it into the serial
2806  *      structure.
2807  ****************************************************************************/
2808 static void get_boot_desc(struct edgeport_serial *edge_serial)
2809 {
2810         int response;
2811
2812         dbg("getting boot descriptor");
2813
2814         response = rom_read(edge_serial->serial,
2815                                 (EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16,
2816                                 (__u16)(EDGE_BOOT_DESC_ADDR & 0x0000ffff),
2817                                 EDGE_BOOT_DESC_LEN,
2818                                 (__u8 *)(&edge_serial->boot_descriptor));
2819
2820         if (response < 1)
2821                 dev_err(&edge_serial->serial->dev->dev,
2822                                 "error in getting boot descriptor\n");
2823         else {
2824                 dbg("**Boot Descriptor:");
2825                 dbg("  BootCodeLength: %d",
2826                     le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength));
2827                 dbg("  MajorVersion:   %d",
2828                         edge_serial->boot_descriptor.MajorVersion);
2829                 dbg("  MinorVersion:   %d",
2830                         edge_serial->boot_descriptor.MinorVersion);
2831                 dbg("  BuildNumber:    %d",
2832                         le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
2833                 dbg("  Capabilities:   0x%x",
2834                       le16_to_cpu(edge_serial->boot_descriptor.Capabilities));
2835                 dbg("  UConfig0:       %d",
2836                         edge_serial->boot_descriptor.UConfig0);
2837                 dbg("  UConfig1:       %d",
2838                         edge_serial->boot_descriptor.UConfig1);
2839         }
2840 }
2841
2842
2843 /****************************************************************************
2844  * load_application_firmware
2845  *      This is called to load the application firmware to the device
2846  ****************************************************************************/
2847 static void load_application_firmware(struct edgeport_serial *edge_serial)
2848 {
2849         const struct ihex_binrec *rec;
2850         const struct firmware *fw;
2851         const char *fw_name;
2852         const char *fw_info;
2853         int response;
2854         __u32 Operaddr;
2855         __u16 build;
2856
2857         switch (edge_serial->product_info.iDownloadFile) {
2858                 case EDGE_DOWNLOAD_FILE_I930:
2859                         fw_info = "downloading firmware version (930)";
2860                         fw_name = "edgeport/down.fw";
2861                         break;
2862
2863                 case EDGE_DOWNLOAD_FILE_80251:
2864                         fw_info = "downloading firmware version (80251)";
2865                         fw_name = "edgeport/down2.fw";
2866                         break;
2867
2868                 case EDGE_DOWNLOAD_FILE_NONE:
2869                         dbg("No download file specified, skipping download");
2870                         return;
2871
2872                 default:
2873                         return;
2874         }
2875
2876         response = request_ihex_firmware(&fw, fw_name,
2877                                     &edge_serial->serial->dev->dev);
2878         if (response) {
2879                 printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
2880                        fw_name, response);
2881                 return;
2882         }
2883
2884         rec = (const struct ihex_binrec *)fw->data;
2885         build = (rec->data[2] << 8) | rec->data[3];
2886
2887         dbg("%s %d.%d.%d", fw_info, rec->data[0], rec->data[1], build);
2888
2889         edge_serial->product_info.FirmwareMajorVersion = rec->data[0];
2890         edge_serial->product_info.FirmwareMinorVersion = rec->data[1];
2891         edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build);
2892
2893         for (rec = ihex_next_binrec(rec); rec;
2894              rec = ihex_next_binrec(rec)) {
2895                 Operaddr = be32_to_cpu(rec->addr);
2896                 response = sram_write(edge_serial->serial,
2897                                      Operaddr >> 16,
2898                                      Operaddr & 0xFFFF,
2899                                      be16_to_cpu(rec->len),
2900                                      &rec->data[0]);
2901                 if (response < 0) {
2902                         dev_err(&edge_serial->serial->dev->dev,
2903                                 "sram_write failed (%x, %x, %d)\n",
2904                                 Operaddr >> 16, Operaddr & 0xFFFF,
2905                                 be16_to_cpu(rec->len));
2906                         break;
2907                 }
2908         }
2909
2910         dbg("sending exec_dl_code");
2911         response = usb_control_msg (edge_serial->serial->dev,
2912                                     usb_sndctrlpipe(edge_serial->serial->dev, 0),
2913                                     USB_REQUEST_ION_EXEC_DL_CODE,
2914                                     0x40, 0x4000, 0x0001, NULL, 0, 3000);
2915
2916         release_firmware(fw);
2917 }
2918
2919
2920 /****************************************************************************
2921  * edge_startup
2922  ****************************************************************************/
2923 static int edge_startup(struct usb_serial *serial)
2924 {
2925         struct edgeport_serial *edge_serial;
2926         struct edgeport_port *edge_port;
2927         struct usb_device *dev;
2928         int i, j;
2929         int response;
2930         bool interrupt_in_found;
2931         bool bulk_in_found;
2932         bool bulk_out_found;
2933         static __u32 descriptor[3] = {  EDGE_COMPATIBILITY_MASK0,
2934                                         EDGE_COMPATIBILITY_MASK1,
2935                                         EDGE_COMPATIBILITY_MASK2 };
2936
2937         dev = serial->dev;
2938
2939         /* create our private serial structure */
2940         edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
2941         if (edge_serial == NULL) {
2942                 dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
2943                 return -ENOMEM;
2944         }
2945         spin_lock_init(&edge_serial->es_lock);
2946         edge_serial->serial = serial;
2947         usb_set_serial_data(serial, edge_serial);
2948
2949         /* get the name for the device from the device */
2950         i = usb_string(dev, dev->descriptor.iManufacturer,
2951             &edge_serial->name[0], MAX_NAME_LEN+1);
2952         if (i < 0)
2953                 i = 0;
2954         edge_serial->name[i++] = ' ';
2955         usb_string(dev, dev->descriptor.iProduct,
2956             &edge_serial->name[i], MAX_NAME_LEN+2 - i);
2957
2958         dev_info(&serial->dev->dev, "%s detected\n", edge_serial->name);
2959
2960         /* Read the epic descriptor */
2961         if (get_epic_descriptor(edge_serial) <= 0) {
2962                 /* memcpy descriptor to Supports structures */
2963                 memcpy(&edge_serial->epic_descriptor.Supports, descriptor,
2964                        sizeof(struct edge_compatibility_bits));
2965
2966                 /* get the manufacturing descriptor for this device */
2967                 get_manufacturing_desc(edge_serial);
2968
2969                 /* get the boot descriptor */
2970                 get_boot_desc(edge_serial);
2971
2972                 get_product_info(edge_serial);
2973         }
2974
2975         /* set the number of ports from the manufacturing description */
2976         /* serial->num_ports = serial->product_info.NumPorts; */
2977         if ((!edge_serial->is_epic) &&
2978             (edge_serial->product_info.NumPorts != serial->num_ports)) {
2979                 dev_warn(&serial->dev->dev, "Device Reported %d serial ports "
2980                          "vs. core thinking we have %d ports, email "
2981                          "greg@kroah.com this information.\n",
2982                          edge_serial->product_info.NumPorts,
2983                          serial->num_ports);
2984         }
2985
2986         dbg("%s - time 1 %ld", __func__, jiffies);
2987
2988         /* If not an EPiC device */
2989         if (!edge_serial->is_epic) {
2990                 /* now load the application firmware into this device */
2991                 load_application_firmware(edge_serial);
2992
2993                 dbg("%s - time 2 %ld", __func__, jiffies);
2994
2995                 /* Check current Edgeport EEPROM and update if necessary */
2996                 update_edgeport_E2PROM(edge_serial);
2997
2998                 dbg("%s - time 3 %ld", __func__, jiffies);
2999
3000                 /* set the configuration to use #1 */
3001 /*              dbg("set_configuration 1"); */
3002 /*              usb_set_configuration (dev, 1); */
3003         }
3004         dbg("  FirmwareMajorVersion  %d.%d.%d",
3005             edge_serial->product_info.FirmwareMajorVersion,
3006             edge_serial->product_info.FirmwareMinorVersion,
3007             le16_to_cpu(edge_serial->product_info.FirmwareBuildNumber));
3008
3009         /* we set up the pointers to the endpoints in the edge_open function,
3010          * as the structures aren't created yet. */
3011
3012         /* set up our port private structures */
3013         for (i = 0; i < serial->num_ports; ++i) {
3014                 edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL);
3015                 if (edge_port == NULL) {
3016                         dev_err(&serial->dev->dev, "%s - Out of memory\n",
3017                                                                    __func__);
3018                         for (j = 0; j < i; ++j) {
3019                                 kfree(usb_get_serial_port_data(serial->port[j]));
3020                                 usb_set_serial_port_data(serial->port[j],
3021                                                                         NULL);
3022                         }
3023                         usb_set_serial_data(serial, NULL);
3024                         kfree(edge_serial);
3025                         return -ENOMEM;
3026                 }
3027                 spin_lock_init(&edge_port->ep_lock);
3028                 edge_port->port = serial->port[i];
3029                 usb_set_serial_port_data(serial->port[i], edge_port);
3030         }
3031
3032         response = 0;
3033
3034         if (edge_serial->is_epic) {
3035                 /* EPIC thing, set up our interrupt polling now and our read
3036                  * urb, so that the device knows it really is connected. */
3037                 interrupt_in_found = bulk_in_found = bulk_out_found = false;
3038                 for (i = 0; i < serial->interface->altsetting[0]
3039                                                 .desc.bNumEndpoints; ++i) {
3040                         struct usb_endpoint_descriptor *endpoint;
3041                         int buffer_size;
3042
3043                         endpoint = &serial->interface->altsetting[0].
3044                                                         endpoint[i].desc;
3045                         buffer_size = usb_endpoint_maxp(endpoint);
3046                         if (!interrupt_in_found &&
3047                             (usb_endpoint_is_int_in(endpoint))) {
3048                                 /* we found a interrupt in endpoint */
3049                                 dbg("found interrupt in");
3050
3051                                 /* not set up yet, so do it now */
3052                                 edge_serial->interrupt_read_urb =
3053                                                 usb_alloc_urb(0, GFP_KERNEL);
3054                                 if (!edge_serial->interrupt_read_urb) {
3055                                         dev_err(&dev->dev, "out of memory\n");
3056                                         return -ENOMEM;
3057                                 }
3058                                 edge_serial->interrupt_in_buffer =
3059                                         kmalloc(buffer_size, GFP_KERNEL);
3060                                 if (!edge_serial->interrupt_in_buffer) {
3061                                         dev_err(&dev->dev, "out of memory\n");
3062                                         usb_free_urb(edge_serial->interrupt_read_urb);
3063                                         return -ENOMEM;
3064                                 }
3065                                 edge_serial->interrupt_in_endpoint =
3066                                                 endpoint->bEndpointAddress;
3067
3068                                 /* set up our interrupt urb */
3069                                 usb_fill_int_urb(
3070                                         edge_serial->interrupt_read_urb,
3071                                         dev,
3072                                         usb_rcvintpipe(dev,
3073                                                 endpoint->bEndpointAddress),
3074                                         edge_serial->interrupt_in_buffer,
3075                                         buffer_size,
3076                                         edge_interrupt_callback,
3077                                         edge_serial,
3078                                         endpoint->bInterval);
3079
3080                                 interrupt_in_found = true;
3081                         }
3082
3083                         if (!bulk_in_found &&
3084                                 (usb_endpoint_is_bulk_in(endpoint))) {
3085                                 /* we found a bulk in endpoint */
3086                                 dbg("found bulk in");
3087
3088                                 /* not set up yet, so do it now */
3089                                 edge_serial->read_urb =
3090                                                 usb_alloc_urb(0, GFP_KERNEL);
3091                                 if (!edge_serial->read_urb) {
3092                                         dev_err(&dev->dev, "out of memory\n");
3093                                         return -ENOMEM;
3094                                 }
3095                                 edge_serial->bulk_in_buffer =
3096                                         kmalloc(buffer_size, GFP_KERNEL);
3097                                 if (!edge_serial->bulk_in_buffer) {
3098                                         dev_err(&dev->dev, "out of memory\n");
3099                                         usb_free_urb(edge_serial->read_urb);
3100                                         return -ENOMEM;
3101                                 }
3102                                 edge_serial->bulk_in_endpoint =
3103                                                 endpoint->bEndpointAddress;
3104
3105                                 /* set up our bulk in urb */
3106                                 usb_fill_bulk_urb(edge_serial->read_urb, dev,
3107                                         usb_rcvbulkpipe(dev,
3108                                                 endpoint->bEndpointAddress),
3109                                         edge_serial->bulk_in_buffer,
3110                                         usb_endpoint_maxp(endpoint),
3111                                         edge_bulk_in_callback,
3112                                         edge_serial);
3113                                 bulk_in_found = true;
3114                         }
3115
3116                         if (!bulk_out_found &&
3117                             (usb_endpoint_is_bulk_out(endpoint))) {
3118                                 /* we found a bulk out endpoint */
3119                                 dbg("found bulk out");
3120                                 edge_serial->bulk_out_endpoint =
3121                                                 endpoint->bEndpointAddress;
3122                                 bulk_out_found = true;
3123                         }
3124                 }
3125
3126                 if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) {
3127                         dev_err(&dev->dev, "Error - the proper endpoints "
3128                                 "were not found!\n");
3129                         return -ENODEV;
3130                 }
3131
3132                 /* start interrupt read for this edgeport this interrupt will
3133                  * continue as long as the edgeport is connected */
3134                 response = usb_submit_urb(edge_serial->interrupt_read_urb,
3135                                                                 GFP_KERNEL);
3136                 if (response)
3137                         dev_err(&dev->dev,
3138                                 "%s - Error %d submitting control urb\n",
3139                                 __func__, response);
3140         }
3141         return response;
3142 }
3143
3144
3145 /****************************************************************************
3146  * edge_disconnect
3147  *      This function is called whenever the device is removed from the usb bus.
3148  ****************************************************************************/
3149 static void edge_disconnect(struct usb_serial *serial)
3150 {
3151         struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
3152
3153         dbg("%s", __func__);
3154
3155         /* stop reads and writes on all ports */
3156         /* free up our endpoint stuff */
3157         if (edge_serial->is_epic) {
3158                 usb_kill_urb(edge_serial->interrupt_read_urb);
3159                 usb_free_urb(edge_serial->interrupt_read_urb);
3160                 kfree(edge_serial->interrupt_in_buffer);
3161
3162                 usb_kill_urb(edge_serial->read_urb);
3163                 usb_free_urb(edge_serial->read_urb);
3164                 kfree(edge_serial->bulk_in_buffer);
3165         }
3166 }
3167
3168
3169 /****************************************************************************
3170  * edge_release
3171  *      This function is called when the device structure is deallocated.
3172  ****************************************************************************/
3173 static void edge_release(struct usb_serial *serial)
3174 {
3175         struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
3176         int i;
3177
3178         dbg("%s", __func__);
3179
3180         for (i = 0; i < serial->num_ports; ++i)
3181                 kfree(usb_get_serial_port_data(serial->port[i]));
3182
3183         kfree(edge_serial);
3184 }
3185
3186
3187 /****************************************************************************
3188  * edgeport_init
3189  *      This is called by the module subsystem, or on startup to initialize us
3190  ****************************************************************************/
3191 static int __init edgeport_init(void)
3192 {
3193         int retval;
3194
3195         retval = usb_serial_register(&edgeport_2port_device);
3196         if (retval)
3197                 goto failed_2port_device_register;
3198         retval = usb_serial_register(&edgeport_4port_device);
3199         if (retval)
3200                 goto failed_4port_device_register;
3201         retval = usb_serial_register(&edgeport_8port_device);
3202         if (retval)
3203                 goto failed_8port_device_register;
3204         retval = usb_serial_register(&epic_device);
3205         if (retval)
3206                 goto failed_epic_device_register;
3207         retval = usb_register(&io_driver);
3208         if (retval)
3209                 goto failed_usb_register;
3210         atomic_set(&CmdUrbs, 0);
3211         printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
3212                DRIVER_DESC "\n");
3213         return 0;
3214
3215 failed_usb_register:
3216         usb_serial_deregister(&epic_device);
3217 failed_epic_device_register:
3218         usb_serial_deregister(&edgeport_8port_device);
3219 failed_8port_device_register:
3220         usb_serial_deregister(&edgeport_4port_device);
3221 failed_4port_device_register:
3222         usb_serial_deregister(&edgeport_2port_device);
3223 failed_2port_device_register:
3224         return retval;
3225 }
3226
3227
3228 /****************************************************************************
3229  * edgeport_exit
3230  *      Called when the driver is about to be unloaded.
3231  ****************************************************************************/
3232 static void __exit edgeport_exit (void)
3233 {
3234         usb_deregister(&io_driver);
3235         usb_serial_deregister(&edgeport_2port_device);
3236         usb_serial_deregister(&edgeport_4port_device);
3237         usb_serial_deregister(&edgeport_8port_device);
3238         usb_serial_deregister(&epic_device);
3239 }
3240
3241 module_init(edgeport_init);
3242 module_exit(edgeport_exit);
3243
3244 /* Module information */
3245 MODULE_AUTHOR(DRIVER_AUTHOR);
3246 MODULE_DESCRIPTION(DRIVER_DESC);
3247 MODULE_LICENSE("GPL");
3248 MODULE_FIRMWARE("edgeport/boot.fw");
3249 MODULE_FIRMWARE("edgeport/boot2.fw");
3250 MODULE_FIRMWARE("edgeport/down.fw");
3251 MODULE_FIRMWARE("edgeport/down2.fw");
3252
3253 module_param(debug, bool, S_IRUGO | S_IWUSR);
3254 MODULE_PARM_DESC(debug, "Debug enabled or not");