drivers/usb/serial/cp210x.c

   1 /*
   2  * Silicon Laboratories CP210x USB to RS232 serial adaptor driver
   3  *
   4  * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk)
   5  *
   6  *      This program is free software; you can redistribute it and/or
   7  *      modify it under the terms of the GNU General Public License version
   8  *      2 as published by the Free Software Foundation.
   9  *
  10  * Support to set flow control line levels using TIOCMGET and TIOCMSET
  11  * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
  12  * control thanks to Munir Nassar nassarmu@real-time.com
  13  *
  14  */
  15
  16 #include <linux/kernel.h>
  17 #include <linux/errno.h>
  18 #include <linux/slab.h>
  19 #include <linux/tty.h>
  20 #include <linux/tty_flip.h>
  21 #include <linux/module.h>
  22 #include <linux/moduleparam.h>
  23 #include <linux/usb.h>
  24 #include <linux/uaccess.h>
  25 #include <linux/usb/serial.h>
  26
  27 /*
  28  * Version Information
  29  */
  30 #define DRIVER_VERSION "v0.09"
  31 #define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
  32
  33 /*
  34  * Function Prototypes
  35  */
  36 static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
  37 static void cp210x_cleanup(struct usb_serial_port *);
  38 static void cp210x_close(struct usb_serial_port *);
  39 static void cp210x_get_termios(struct tty_struct *,
  40         struct usb_serial_port *port);
  41 static void cp210x_get_termios_port(struct usb_serial_port *port,
  42         unsigned int *cflagp, unsigned int *baudp);
  43 static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
  44                                                         struct ktermios*);
  45 static int cp210x_tiocmget(struct tty_struct *, struct file *);
  46 static int cp210x_tiocmset(struct tty_struct *, struct file *,
  47                 unsigned int, unsigned int);
  48 static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *,
  49                 unsigned int, unsigned int);
  50 static void cp210x_break_ctl(struct tty_struct *, int);
  51 static int cp210x_startup(struct usb_serial *);
  52 static void cp210x_disconnect(struct usb_serial *);
  53
  54 static int debug;
  55
  56 static struct usb_device_id id_table [] = {
  57         { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
  58         { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
  59         { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
  60         { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
  61         { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
  62         { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
  63         { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
  64         { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
  65         { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
  66         { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
  67         { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
  68         { USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
  69         { USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
  70         { USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
  71         { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
  72         { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
  73         { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
  74         { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
  75         { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
  76         { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
  77         { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
  78         { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
  79         { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
  80         { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
  81         { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
  82         { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
  83         { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
  84         { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
  85         { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
  86         { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
  87         { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
  88         { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
  89         { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
  90         { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
  91         { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
  92         { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
  93         { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
  94         { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
  95         { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
  96         { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
  97         { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
  98         { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
  99         { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
 100         { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
 101         { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
 102         { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
 103         { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 104         { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 105         { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
 106         { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
 107         { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
 108         { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
 109         { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
 110         { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
 111         { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
 112         { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
 113         { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
 114         { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
 115         { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
 116         { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
 117         { } /* Terminating Entry */
 118 };
 119
 120 MODULE_DEVICE_TABLE(usb, id_table);
 121
 122 static struct usb_driver cp210x_driver = {
 123         .name           = "cp210x",
 124         .probe          = usb_serial_probe,
 125         .disconnect     = usb_serial_disconnect,
 126         .id_table       = id_table,
 127         .no_dynamic_id  =       1,
 128 };
 129
 130 static struct usb_serial_driver cp210x_device = {
 131         .driver = {
 132                 .owner =        THIS_MODULE,
 133                 .name =         "cp210x",
 134         },
 135         .usb_driver             = &cp210x_driver,
 136         .id_table               = id_table,
 137         .num_ports              = 1,
 138         .open                   = cp210x_open,
 139         .close                  = cp210x_close,
 140         .break_ctl              = cp210x_break_ctl,
 141         .set_termios            = cp210x_set_termios,
 142         .tiocmget               = cp210x_tiocmget,
 143         .tiocmset               = cp210x_tiocmset,
 144         .attach                 = cp210x_startup,
 145         .disconnect             = cp210x_disconnect,
 146 };
 147
 148 /* Config request types */
 149 #define REQTYPE_HOST_TO_DEVICE  0x41
 150 #define REQTYPE_DEVICE_TO_HOST  0xc1
 151
 152 /* Config request codes */
 153 #define CP210X_IFC_ENABLE       0x00
 154 #define CP210X_SET_BAUDDIV      0x01
 155 #define CP210X_GET_BAUDDIV      0x02
 156 #define CP210X_SET_LINE_CTL     0x03
 157 #define CP210X_GET_LINE_CTL     0x04
 158 #define CP210X_SET_BREAK        0x05
 159 #define CP210X_IMM_CHAR         0x06
 160 #define CP210X_SET_MHS          0x07
 161 #define CP210X_GET_MDMSTS       0x08
 162 #define CP210X_SET_XON          0x09
 163 #define CP210X_SET_XOFF         0x0A
 164 #define CP210X_SET_EVENTMASK    0x0B
 165 #define CP210X_GET_EVENTMASK    0x0C
 166 #define CP210X_SET_CHAR         0x0D
 167 #define CP210X_GET_CHARS        0x0E
 168 #define CP210X_GET_PROPS        0x0F
 169 #define CP210X_GET_COMM_STATUS  0x10
 170 #define CP210X_RESET            0x11
 171 #define CP210X_PURGE            0x12
 172 #define CP210X_SET_FLOW         0x13
 173 #define CP210X_GET_FLOW         0x14
 174 #define CP210X_EMBED_EVENTS     0x15
 175 #define CP210X_GET_EVENTSTATE   0x16
 176 #define CP210X_SET_CHARS        0x19
 177
 178 /* CP210X_IFC_ENABLE */
 179 #define UART_ENABLE             0x0001
 180 #define UART_DISABLE            0x0000
 181
 182 /* CP210X_(SET|GET)_BAUDDIV */
 183 #define BAUD_RATE_GEN_FREQ      0x384000
 184
 185 /* CP210X_(SET|GET)_LINE_CTL */
 186 #define BITS_DATA_MASK          0X0f00
 187 #define BITS_DATA_5             0X0500
 188 #define BITS_DATA_6             0X0600
 189 #define BITS_DATA_7             0X0700
 190 #define BITS_DATA_8             0X0800
 191 #define BITS_DATA_9             0X0900
 192
 193 #define BITS_PARITY_MASK        0x00f0
 194 #define BITS_PARITY_NONE        0x0000
 195 #define BITS_PARITY_ODD         0x0010
 196 #define BITS_PARITY_EVEN        0x0020
 197 #define BITS_PARITY_MARK        0x0030
 198 #define BITS_PARITY_SPACE       0x0040
 199
 200 #define BITS_STOP_MASK          0x000f
 201 #define BITS_STOP_1             0x0000
 202 #define BITS_STOP_1_5           0x0001
 203 #define BITS_STOP_2             0x0002
 204
 205 /* CP210X_SET_BREAK */
 206 #define BREAK_ON                0x0000
 207 #define BREAK_OFF               0x0001
 208
 209 /* CP210X_(SET_MHS|GET_MDMSTS) */
 210 #define CONTROL_DTR             0x0001
 211 #define CONTROL_RTS             0x0002
 212 #define CONTROL_CTS             0x0010
 213 #define CONTROL_DSR             0x0020
 214 #define CONTROL_RING            0x0040
 215 #define CONTROL_DCD             0x0080
 216 #define CONTROL_WRITE_DTR       0x0100
 217 #define CONTROL_WRITE_RTS       0x0200
 218
 219 /*
 220  * cp210x_get_config
 221  * Reads from the CP210x configuration registers
 222  * 'size' is specified in bytes.
 223  * 'data' is a pointer to a pre-allocated array of integers large
 224  * enough to hold 'size' bytes (with 4 bytes to each integer)
 225  */
 226 static int cp210x_get_config(struct usb_serial_port *port, u8 request,
 227                 unsigned int *data, int size)
 228 {
 229         struct usb_serial *serial = port->serial;
 230         __le32 *buf;
 231         int result, i, length;
 232
 233         /* Number of integers required to contain the array */
 234         length = (((size - 1) | 3) + 1)/4;
 235
 236         buf = kcalloc(length, sizeof(__le32), GFP_KERNEL);
 237         if (!buf) {
 238                 dev_err(&port->dev, "%s - out of memory.\n", __func__);
 239                 return -ENOMEM;
 240         }
 241
 242         /* Issue the request, attempting to read 'size' bytes */
 243         result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 244                                 request, REQTYPE_DEVICE_TO_HOST, 0x0000,
 245                                 0, buf, size, 300);
 246
 247         /* Convert data into an array of integers */
 248         for (i = 0; i < length; i++)
 249                 data[i] = le32_to_cpu(buf[i]);
 250
 251         kfree(buf);
 252
 253         if (result != size) {
 254                 dbg("%s - Unable to send config request, "
 255                                 "request=0x%x size=%d result=%d\n",
 256                                 __func__, request, size, result);
 257                 return -EPROTO;
 258         }
 259
 260         return 0;
 261 }
 262
 263 /*
 264  * cp210x_set_config
 265  * Writes to the CP210x configuration registers
 266  * Values less than 16 bits wide are sent directly
 267  * 'size' is specified in bytes.
 268  */
 269 static int cp210x_set_config(struct usb_serial_port *port, u8 request,
 270                 unsigned int *data, int size)
 271 {
 272         struct usb_serial *serial = port->serial;
 273         __le32 *buf;
 274         int result, i, length;
 275
 276         /* Number of integers required to contain the array */
 277         length = (((size - 1) | 3) + 1)/4;
 278
 279         buf = kmalloc(length * sizeof(__le32), GFP_KERNEL);
 280         if (!buf) {
 281                 dev_err(&port->dev, "%s - out of memory.\n",
 282                                 __func__);
 283                 return -ENOMEM;
 284         }
 285
 286         /* Array of integers into bytes */
 287         for (i = 0; i < length; i++)
 288                 buf[i] = cpu_to_le32(data[i]);
 289
 290         if (size > 2) {
 291                 result = usb_control_msg(serial->dev,
 292                                 usb_sndctrlpipe(serial->dev, 0),
 293                                 request, REQTYPE_HOST_TO_DEVICE, 0x0000,
 294                                 0, buf, size, 300);
 295         } else {
 296                 result = usb_control_msg(serial->dev,
 297                                 usb_sndctrlpipe(serial->dev, 0),
 298                                 request, REQTYPE_HOST_TO_DEVICE, data[0],
 299                                 0, NULL, 0, 300);
 300         }
 301
 302         kfree(buf);
 303
 304         if ((size > 2 && result != size) || result < 0) {
 305                 dbg("%s - Unable to send request, "
 306                                 "request=0x%x size=%d result=%d\n",
 307                                 __func__, request, size, result);
 308                 return -EPROTO;
 309         }
 310
 311         /* Single data value */
 312         result = usb_control_msg(serial->dev,
 313                         usb_sndctrlpipe(serial->dev, 0),
 314                         request, REQTYPE_HOST_TO_DEVICE, data[0],
 315                         0, NULL, 0, 300);
 316         return 0;
 317 }
 318
 319 /*
 320  * cp210x_set_config_single
 321  * Convenience function for calling cp210x_set_config on single data values
 322  * without requiring an integer pointer
 323  */
 324 static inline int cp210x_set_config_single(struct usb_serial_port *port,
 325                 u8 request, unsigned int data)
 326 {
 327         return cp210x_set_config(port, request, &data, 2);
 328 }
 329
 330 /*
 331  * cp210x_quantise_baudrate
 332  * Quantises the baud rate as per AN205 Table 1
 333  */
 334 static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
 335         if      (baud <= 56)       baud = 0;
 336         else if (baud <= 300)      baud = 300;
 337         else if (baud <= 600)      baud = 600;
 338         else if (baud <= 1200)     baud = 1200;
 339         else if (baud <= 1800)     baud = 1800;
 340         else if (baud <= 2400)     baud = 2400;
 341         else if (baud <= 4000)     baud = 4000;
 342         else if (baud <= 4803)     baud = 4800;
 343         else if (baud <= 7207)     baud = 7200;
 344         else if (baud <= 9612)     baud = 9600;
 345         else if (baud <= 14428)    baud = 14400;
 346         else if (baud <= 16062)    baud = 16000;
 347         else if (baud <= 19250)    baud = 19200;
 348         else if (baud <= 28912)    baud = 28800;
 349         else if (baud <= 38601)    baud = 38400;
 350         else if (baud <= 51558)    baud = 51200;
 351         else if (baud <= 56280)    baud = 56000;
 352         else if (baud <= 58053)    baud = 57600;
 353         else if (baud <= 64111)    baud = 64000;
 354         else if (baud <= 77608)    baud = 76800;
 355         else if (baud <= 117028)   baud = 115200;
 356         else if (baud <= 129347)   baud = 128000;
 357         else if (baud <= 156868)   baud = 153600;
 358         else if (baud <= 237832)   baud = 230400;
 359         else if (baud <= 254234)   baud = 250000;
 360         else if (baud <= 273066)   baud = 256000;
 361         else if (baud <= 491520)   baud = 460800;
 362         else if (baud <= 567138)   baud = 500000;
 363         else if (baud <= 670254)   baud = 576000;
 364         else if (baud <= 1053257)  baud = 921600;
 365         else if (baud <= 1474560)  baud = 1228800;
 366         else if (baud <= 2457600)  baud = 1843200;
 367         else                       baud = 3686400;
 368         return baud;
 369 }
 370
 371 static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 372 {
 373         struct usb_serial *serial = port->serial;
 374         int result;
 375
 376         dbg("%s - port %d", __func__, port->number);
 377
 378         if (cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) {
 379                 dev_err(&port->dev, "%s - Unable to enable UART\n",
 380                                 __func__);
 381                 return -EPROTO;
 382         }
 383
 384         /* Start reading from the device */
 385         usb_fill_bulk_urb(port->read_urb, serial->dev,
 386                         usb_rcvbulkpipe(serial->dev,
 387                         port->bulk_in_endpointAddress),
 388                         port->read_urb->transfer_buffer,
 389                         port->read_urb->transfer_buffer_length,
 390                         serial->type->read_bulk_callback,
 391                         port);
 392         result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 393         if (result) {
 394                 dev_err(&port->dev, "%s - failed resubmitting read urb, "
 395                                 "error %d\n", __func__, result);
 396                 return result;
 397         }
 398
 399         /* Configure the termios structure */
 400         cp210x_get_termios(tty, port);
 401         return 0;
 402 }
 403
 404 static void cp210x_cleanup(struct usb_serial_port *port)
 405 {
 406         struct usb_serial *serial = port->serial;
 407
 408         dbg("%s - port %d", __func__, port->number);
 409
 410         if (serial->dev) {
 411                 /* shutdown any bulk reads that might be going on */
 412                 if (serial->num_bulk_out)
 413                         usb_kill_urb(port->write_urb);
 414                 if (serial->num_bulk_in)
 415                         usb_kill_urb(port->read_urb);
 416         }
 417 }
 418
 419 static void cp210x_close(struct usb_serial_port *port)
 420 {
 421         dbg("%s - port %d", __func__, port->number);
 422
 423         /* shutdown our urbs */
 424         dbg("%s - shutting down urbs", __func__);
 425         usb_kill_urb(port->write_urb);
 426         usb_kill_urb(port->read_urb);
 427
 428         mutex_lock(&port->serial->disc_mutex);
 429         if (!port->serial->disconnected)
 430                 cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
 431         mutex_unlock(&port->serial->disc_mutex);
 432 }
 433
 434 /*
 435  * cp210x_get_termios
 436  * Reads the baud rate, data bits, parity, stop bits and flow control mode
 437  * from the device, corrects any unsupported values, and configures the
 438  * termios structure to reflect the state of the device
 439  */
 440 static void cp210x_get_termios(struct tty_struct *tty,
 441         struct usb_serial_port *port)
 442 {
 443         unsigned int baud;
 444
 445         if (tty) {
 446                 cp210x_get_termios_port(tty->driver_data,
 447                         &tty->termios->c_cflag, &baud);
 448                 tty_encode_baud_rate(tty, baud, baud);
 449         }
 450
 451         else {
 452                 unsigned int cflag;
 453                 cflag = 0;
 454                 cp210x_get_termios_port(port, &cflag, &baud);
 455         }
 456 }
 457
 458 /*
 459  * cp210x_get_termios_port
 460  * This is the heart of cp210x_get_termios which always uses a &usb_serial_port.
 461  */
 462 static void cp210x_get_termios_port(struct usb_serial_port *port,
 463         unsigned int *cflagp, unsigned int *baudp)
 464 {
 465         unsigned int cflag, modem_ctl[4];
 466         unsigned int baud;
 467         unsigned int bits;
 468
 469         dbg("%s - port %d", __func__, port->number);
 470
 471         cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2);
 472         /* Convert to baudrate */
 473         if (baud)
 474                 baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
 475
 476         dbg("%s - baud rate = %d", __func__, baud);
 477         *baudp = baud;
 478
 479         cflag = *cflagp;
 480
 481         cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
 482         cflag &= ~CSIZE;
 483         switch (bits & BITS_DATA_MASK) {
 484         case BITS_DATA_5:
 485                 dbg("%s - data bits = 5", __func__);
 486                 cflag |= CS5;
 487                 break;
 488         case BITS_DATA_6:
 489                 dbg("%s - data bits = 6", __func__);
 490                 cflag |= CS6;
 491                 break;
 492         case BITS_DATA_7:
 493                 dbg("%s - data bits = 7", __func__);
 494                 cflag |= CS7;
 495                 break;
 496         case BITS_DATA_8:
 497                 dbg("%s - data bits = 8", __func__);
 498                 cflag |= CS8;
 499                 break;
 500         case BITS_DATA_9:
 501                 dbg("%s - data bits = 9 (not supported, using 8 data bits)",
 502                                                                 __func__);
 503                 cflag |= CS8;
 504                 bits &= ~BITS_DATA_MASK;
 505                 bits |= BITS_DATA_8;
 506                 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 507                 break;
 508         default:
 509                 dbg("%s - Unknown number of data bits, using 8", __func__);
 510                 cflag |= CS8;
 511                 bits &= ~BITS_DATA_MASK;
 512                 bits |= BITS_DATA_8;
 513                 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 514                 break;
 515         }
 516
 517         switch (bits & BITS_PARITY_MASK) {
 518         case BITS_PARITY_NONE:
 519                 dbg("%s - parity = NONE", __func__);
 520                 cflag &= ~PARENB;
 521                 break;
 522         case BITS_PARITY_ODD:
 523                 dbg("%s - parity = ODD", __func__);
 524                 cflag |= (PARENB|PARODD);
 525                 break;
 526         case BITS_PARITY_EVEN:
 527                 dbg("%s - parity = EVEN", __func__);
 528                 cflag &= ~PARODD;
 529                 cflag |= PARENB;
 530                 break;
 531         case BITS_PARITY_MARK:
 532                 dbg("%s - parity = MARK (not supported, disabling parity)",
 533                                 __func__);
 534                 cflag &= ~PARENB;
 535                 bits &= ~BITS_PARITY_MASK;
 536                 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 537                 break;
 538         case BITS_PARITY_SPACE:
 539                 dbg("%s - parity = SPACE (not supported, disabling parity)",
 540                                 __func__);
 541                 cflag &= ~PARENB;
 542                 bits &= ~BITS_PARITY_MASK;
 543                 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 544                 break;
 545         default:
 546                 dbg("%s - Unknown parity mode, disabling parity", __func__);
 547                 cflag &= ~PARENB;
 548                 bits &= ~BITS_PARITY_MASK;
 549                 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 550                 break;
 551         }
 552
 553         cflag &= ~CSTOPB;
 554         switch (bits & BITS_STOP_MASK) {
 555         case BITS_STOP_1:
 556                 dbg("%s - stop bits = 1", __func__);
 557                 break;
 558         case BITS_STOP_1_5:
 559                 dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)",
 560                                                                 __func__);
 561                 bits &= ~BITS_STOP_MASK;
 562                 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 563                 break;
 564         case BITS_STOP_2:
 565                 dbg("%s - stop bits = 2", __func__);
 566                 cflag |= CSTOPB;
 567                 break;
 568         default:
 569                 dbg("%s - Unknown number of stop bits, using 1 stop bit",
 570                                                                 __func__);
 571                 bits &= ~BITS_STOP_MASK;
 572                 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 573                 break;
 574         }
 575
 576         cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
 577         if (modem_ctl[0] & 0x0008) {
 578                 dbg("%s - flow control = CRTSCTS", __func__);
 579                 cflag |= CRTSCTS;
 580         } else {
 581                 dbg("%s - flow control = NONE", __func__);
 582                 cflag &= ~CRTSCTS;
 583         }
 584
 585         *cflagp = cflag;
 586 }
 587
 588 static void cp210x_set_termios(struct tty_struct *tty,
 589                 struct usb_serial_port *port, struct ktermios *old_termios)
 590 {
 591         unsigned int cflag, old_cflag;
 592         unsigned int baud = 0, bits;
 593         unsigned int modem_ctl[4];
 594
 595         dbg("%s - port %d", __func__, port->number);
 596
 597         if (!tty)
 598                 return;
 599
 600         tty->termios->c_cflag &= ~CMSPAR;
 601         cflag = tty->termios->c_cflag;
 602         old_cflag = old_termios->c_cflag;
 603         baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty));
 604
 605         /* If the baud rate is to be updated*/
 606         if (baud != tty_termios_baud_rate(old_termios) && baud != 0) {
 607                 dbg("%s - Setting baud rate to %d baud", __func__,
 608                                 baud);
 609                 if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
 610                                         ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
 611                         dbg("Baud rate requested not supported by device\n");
 612                         baud = tty_termios_baud_rate(old_termios);
 613                 }
 614         }
 615         /* Report back the resulting baud rate */
 616         tty_encode_baud_rate(tty, baud, baud);
 617
 618         /* If the number of data bits is to be updated */
 619         if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
 620                 cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
 621                 bits &= ~BITS_DATA_MASK;
 622                 switch (cflag & CSIZE) {
 623                 case CS5:
 624                         bits |= BITS_DATA_5;
 625                         dbg("%s - data bits = 5", __func__);
 626                         break;
 627                 case CS6:
 628                         bits |= BITS_DATA_6;
 629                         dbg("%s - data bits = 6", __func__);
 630                         break;
 631                 case CS7:
 632                         bits |= BITS_DATA_7;
 633                         dbg("%s - data bits = 7", __func__);
 634                         break;
 635                 case CS8:
 636                         bits |= BITS_DATA_8;
 637                         dbg("%s - data bits = 8", __func__);
 638                         break;
 639                 /*case CS9:
 640                         bits |= BITS_DATA_9;
 641                         dbg("%s - data bits = 9", __func__);
 642                         break;*/
 643                 default:
 644                         dbg("cp210x driver does not "
 645                                         "support the number of bits requested,"
 646                                         " using 8 bit mode\n");
 647                                 bits |= BITS_DATA_8;
 648                                 break;
 649                 }
 650                 if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
 651                         dbg("Number of data bits requested "
 652                                         "not supported by device\n");
 653         }
 654
 655         if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) {
 656                 cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
 657                 bits &= ~BITS_PARITY_MASK;
 658                 if (cflag & PARENB) {
 659                         if (cflag & PARODD) {
 660                                 bits |= BITS_PARITY_ODD;
 661                                 dbg("%s - parity = ODD", __func__);
 662                         } else {
 663                                 bits |= BITS_PARITY_EVEN;
 664                                 dbg("%s - parity = EVEN", __func__);
 665                         }
 666                 }
 667                 if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
 668                         dbg("Parity mode not supported "
 669                                         "by device\n");
 670         }
 671
 672         if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
 673                 cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
 674                 bits &= ~BITS_STOP_MASK;
 675                 if (cflag & CSTOPB) {
 676                         bits |= BITS_STOP_2;
 677                         dbg("%s - stop bits = 2", __func__);
 678                 } else {
 679                         bits |= BITS_STOP_1;
 680                         dbg("%s - stop bits = 1", __func__);
 681                 }
 682                 if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
 683                         dbg("Number of stop bits requested "
 684                                         "not supported by device\n");
 685         }
 686
 687         if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
 688                 cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
 689                 dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
 690                                 __func__, modem_ctl[0], modem_ctl[1],
 691                                 modem_ctl[2], modem_ctl[3]);
 692
 693                 if (cflag & CRTSCTS) {
 694                         modem_ctl[0] &= ~0x7B;
 695                         modem_ctl[0] |= 0x09;
 696                         modem_ctl[1] = 0x80;
 697                         dbg("%s - flow control = CRTSCTS", __func__);
 698                 } else {
 699                         modem_ctl[0] &= ~0x7B;
 700                         modem_ctl[0] |= 0x01;
 701                         modem_ctl[1] |= 0x40;
 702                         dbg("%s - flow control = NONE", __func__);
 703                 }
 704
 705                 dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
 706                                 __func__, modem_ctl[0], modem_ctl[1],
 707                                 modem_ctl[2], modem_ctl[3]);
 708                 cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16);
 709         }
 710
 711 }
 712
 713 static int cp210x_tiocmset (struct tty_struct *tty, struct file *file,
 714                 unsigned int set, unsigned int clear)
 715 {
 716         struct usb_serial_port *port = tty->driver_data;
 717         return cp210x_tiocmset_port(port, file, set, clear);
 718 }
 719
 720 static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file,
 721                 unsigned int set, unsigned int clear)
 722 {
 723         unsigned int control = 0;
 724
 725         dbg("%s - port %d", __func__, port->number);
 726
 727         if (set & TIOCM_RTS) {
 728                 control |= CONTROL_RTS;
 729                 control |= CONTROL_WRITE_RTS;
 730         }
 731         if (set & TIOCM_DTR) {
 732                 control |= CONTROL_DTR;
 733                 control |= CONTROL_WRITE_DTR;
 734         }
 735         if (clear & TIOCM_RTS) {
 736                 control &= ~CONTROL_RTS;
 737                 control |= CONTROL_WRITE_RTS;
 738         }
 739         if (clear & TIOCM_DTR) {
 740                 control &= ~CONTROL_DTR;
 741                 control |= CONTROL_WRITE_DTR;
 742         }
 743
 744         dbg("%s - control = 0x%.4x", __func__, control);
 745
 746         return cp210x_set_config(port, CP210X_SET_MHS, &control, 2);
 747 }
 748
 749 static int cp210x_tiocmget (struct tty_struct *tty, struct file *file)
 750 {
 751         struct usb_serial_port *port = tty->driver_data;
 752         unsigned int control;
 753         int result;
 754
 755         dbg("%s - port %d", __func__, port->number);
 756
 757         cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
 758
 759         result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
 760                 |((control & CONTROL_RTS) ? TIOCM_RTS : 0)
 761                 |((control & CONTROL_CTS) ? TIOCM_CTS : 0)
 762                 |((control & CONTROL_DSR) ? TIOCM_DSR : 0)
 763                 |((control & CONTROL_RING)? TIOCM_RI  : 0)
 764                 |((control & CONTROL_DCD) ? TIOCM_CD  : 0);
 765
 766         dbg("%s - control = 0x%.2x", __func__, control);
 767
 768         return result;
 769 }
 770
 771 static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
 772 {
 773         struct usb_serial_port *port = tty->driver_data;
 774         unsigned int state;
 775
 776         dbg("%s - port %d", __func__, port->number);
 777         if (break_state == 0)
 778                 state = BREAK_OFF;
 779         else
 780                 state = BREAK_ON;
 781         dbg("%s - turning break %s", __func__,
 782                         state == BREAK_OFF ? "off" : "on");
 783         cp210x_set_config(port, CP210X_SET_BREAK, &state, 2);
 784 }
 785
 786 static int cp210x_startup(struct usb_serial *serial)
 787 {
 788         /* cp210x buffers behave strangely unless device is reset */
 789         usb_reset_device(serial->dev);
 790         return 0;
 791 }
 792
 793 static void cp210x_disconnect(struct usb_serial *serial)
 794 {
 795         int i;
 796
 797         dbg("%s", __func__);
 798
 799         /* Stop reads and writes on all ports */
 800         for (i = 0; i < serial->num_ports; ++i)
 801                 cp210x_cleanup(serial->port[i]);
 802 }
 803
 804 static int __init cp210x_init(void)
 805 {
 806         int retval;
 807
 808         retval = usb_serial_register(&cp210x_device);
 809         if (retval)
 810                 return retval; /* Failed to register */
 811
 812         retval = usb_register(&cp210x_driver);
 813         if (retval) {
 814                 /* Failed to register */
 815                 usb_serial_deregister(&cp210x_device);
 816                 return retval;
 817         }
 818
 819         /* Success */
 820         printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
 821                DRIVER_DESC "\n");
 822         return 0;
 823 }
 824
 825 static void __exit cp210x_exit(void)
 826 {
 827         usb_deregister(&cp210x_driver);
 828         usb_serial_deregister(&cp210x_device);
 829 }
 830
 831 module_init(cp210x_init);
 832 module_exit(cp210x_exit);
 833
 834 MODULE_DESCRIPTION(DRIVER_DESC);
 835 MODULE_VERSION(DRIVER_VERSION);
 836 MODULE_LICENSE("GPL");
 837
 838 module_param(debug, bool, S_IRUGO | S_IWUSR);
 839 MODULE_PARM_DESC(debug, "Enable verbose debugging messages");