drivers/usb/serial/console.c

   1 /*
   2  * USB Serial Console driver
   3  *
   4  * Copyright (C) 2001 - 2002 Greg Kroah-Hartman (greg@kroah.com)
   5  *
   6  *      This program is free software; you can redistribute it and/or
   7  *      modify it under the terms of the GNU General Public License version
   8  *      2 as published by the Free Software Foundation.
   9  *
  10  * Thanks to Randy Dunlap for the original version of this code.
  11  *
  12  */
  13
  14 #include <linux/kernel.h>
  15 #include <linux/init.h>
  16 #include <linux/slab.h>
  17 #include <linux/tty.h>
  18 #include <linux/console.h>
  19 #include <linux/serial.h>
  20 #include <linux/usb.h>
  21 #include <linux/usb/serial.h>
  22
  23 static int debug;
  24
  25 struct usbcons_info {
  26         int                     magic;
  27         int                     break_flag;
  28         struct usb_serial_port  *port;
  29 };
  30
  31 static struct usbcons_info usbcons_info;
  32 static struct console usbcons;
  33
  34 /*
  35  * ------------------------------------------------------------
  36  * USB Serial console driver
  37  *
  38  * Much of the code here is copied from drivers/char/serial.c
  39  * and implements a phony serial console in the same way that
  40  * serial.c does so that in case some software queries it,
  41  * it will get the same results.
  42  *
  43  * Things that are different from the way the serial port code
  44  * does things, is that we call the lower level usb-serial
  45  * driver code to initialize the device, and we set the initial
  46  * console speeds based on the command line arguments.
  47  * ------------------------------------------------------------
  48  */
  49
  50
  51 /*
  52  * The parsing of the command line works exactly like the
  53  * serial.c code, except that the specifier is "ttyUSB" instead
  54  * of "ttyS".
  55  */
  56 static int usb_console_setup(struct console *co, char *options)
  57 {
  58         struct usbcons_info *info = &usbcons_info;
  59         int baud = 9600;
  60         int bits = 8;
  61         int parity = 'n';
  62         int doflow = 0;
  63         int cflag = CREAD | HUPCL | CLOCAL;
  64         char *s;
  65         struct usb_serial *serial;
  66         struct usb_serial_port *port;
  67         int retval;
  68         struct tty_struct *tty = NULL;
  69         struct ktermios dummy;
  70
  71         dbg("%s", __func__);
  72
  73         if (options) {
  74                 baud = simple_strtoul(options, NULL, 10);
  75                 s = options;
  76                 while (*s >= '0' && *s <= '9')
  77                         s++;
  78                 if (*s)
  79                         parity = *s++;
  80                 if (*s)
  81                         bits   = *s++ - '0';
  82                 if (*s)
  83                         doflow = (*s++ == 'r');
  84         }
  85
  86         /* Sane default */
  87         if (baud == 0)
  88                 baud = 9600;
  89
  90         switch (bits) {
  91         case 7:
  92                 cflag |= CS7;
  93                 break;
  94         default:
  95         case 8:
  96                 cflag |= CS8;
  97                 break;
  98         }
  99         switch (parity) {
 100         case 'o': case 'O':
 101                 cflag |= PARODD;
 102                 break;
 103         case 'e': case 'E':
 104                 cflag |= PARENB;
 105                 break;
 106         }
 107         co->cflag = cflag;
 108
 109         /*
 110          * no need to check the index here: if the index is wrong, console
 111          * code won't call us
 112          */
 113         serial = usb_serial_get_by_index(co->index);
 114         if (serial == NULL) {
 115                 /* no device is connected yet, sorry :( */
 116                 err("No USB device connected to ttyUSB%i", co->index);
 117                 return -ENODEV;
 118         }
 119
 120         retval = usb_autopm_get_interface(serial->interface);
 121         if (retval)
 122                 goto error_get_interface;
 123
 124         port = serial->port[co->index - serial->minor];
 125         tty_port_tty_set(&port->port, NULL);
 126
 127         info->port = port;
 128
 129         ++port->port.count;
 130         if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) {
 131                 if (serial->type->set_termios) {
 132                         /*
 133                          * allocate a fake tty so the driver can initialize
 134                          * the termios structure, then later call set_termios to
 135                          * configure according to command line arguments
 136                          */
 137                         tty = kzalloc(sizeof(*tty), GFP_KERNEL);
 138                         if (!tty) {
 139                                 retval = -ENOMEM;
 140                                 err("no more memory");
 141                                 goto reset_open_count;
 142                         }
 143                         kref_init(&tty->kref);
 144                         tty_port_tty_set(&port->port, tty);
 145                         tty->driver = usb_serial_tty_driver;
 146                         tty->index = co->index;
 147                         if (tty_init_termios(tty)) {
 148                                 retval = -ENOMEM;
 149                                 err("no more memory");
 150                                 goto free_tty;
 151                         }
 152                 }
 153
 154                 /* only call the device specific open if this
 155                  * is the first time the port is opened */
 156                 if (serial->type->open)
 157                         retval = serial->type->open(NULL, port);
 158                 else
 159                         retval = usb_serial_generic_open(NULL, port);
 160
 161                 if (retval) {
 162                         err("could not open USB console port");
 163                         goto fail;
 164                 }
 165
 166                 if (serial->type->set_termios) {
 167                         tty->termios->c_cflag = cflag;
 168                         tty_termios_encode_baud_rate(tty->termios, baud, baud);
 169                         memset(&dummy, 0, sizeof(struct ktermios));
 170                         serial->type->set_termios(tty, port, &dummy);
 171
 172                         tty_port_tty_set(&port->port, NULL);
 173                         kfree(tty);
 174                 }
 175                 set_bit(ASYNCB_INITIALIZED, &port->port.flags);
 176         }
 177         /* Now that any required fake tty operations are completed restore
 178          * the tty port count */
 179         --port->port.count;
 180         /* The console is special in terms of closing the device so
 181          * indicate this port is now acting as a system console. */
 182         port->port.console = 1;
 183
 184         mutex_unlock(&serial->disc_mutex);
 185         return retval;
 186
 187  fail:
 188         tty_port_tty_set(&port->port, NULL);
 189  free_tty:
 190         kfree(tty);
 191  reset_open_count:
 192         port->port.count = 0;
 193         usb_autopm_put_interface(serial->interface);
 194  error_get_interface:
 195         usb_serial_put(serial);
 196         mutex_unlock(&serial->disc_mutex);
 197         return retval;
 198 }
 199
 200 static void usb_console_write(struct console *co,
 201                                         const char *buf, unsigned count)
 202 {
 203         static struct usbcons_info *info = &usbcons_info;
 204         struct usb_serial_port *port = info->port;
 205         struct usb_serial *serial;
 206         int retval = -ENODEV;
 207
 208         if (!port || port->serial->dev->state == USB_STATE_NOTATTACHED)
 209                 return;
 210         serial = port->serial;
 211
 212         if (count == 0)
 213                 return;
 214
 215         dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
 216
 217         if (!port->port.console) {
 218                 dbg("%s - port not opened", __func__);
 219                 return;
 220         }
 221
 222         while (count) {
 223                 unsigned int i;
 224                 unsigned int lf;
 225                 /* search for LF so we can insert CR if necessary */
 226                 for (i = 0, lf = 0 ; i < count ; i++) {
 227                         if (*(buf + i) == 10) {
 228                                 lf = 1;
 229                                 i++;
 230                                 break;
 231                         }
 232                 }
 233                 /* pass on to the driver specific version of this function if
 234                    it is available */
 235                 if (serial->type->write)
 236                         retval = serial->type->write(NULL, port, buf, i);
 237                 else
 238                         retval = usb_serial_generic_write(NULL, port, buf, i);
 239                 dbg("%s - return value : %d", __func__, retval);
 240                 if (lf) {
 241                         /* append CR after LF */
 242                         unsigned char cr = 13;
 243                         if (serial->type->write)
 244                                 retval = serial->type->write(NULL,
 245                                                                 port, &cr, 1);
 246                         else
 247                                 retval = usb_serial_generic_write(NULL,
 248                                                                 port, &cr, 1);
 249                         dbg("%s - return value : %d", __func__, retval);
 250                 }
 251                 buf += i;
 252                 count -= i;
 253         }
 254 }
 255
 256 static struct tty_driver *usb_console_device(struct console *co, int *index)
 257 {
 258         struct tty_driver **p = (struct tty_driver **)co->data;
 259
 260         if (!*p)
 261                 return NULL;
 262
 263         *index = co->index;
 264         return *p;
 265 }
 266
 267 static struct console usbcons = {
 268         .name =         "ttyUSB",
 269         .write =        usb_console_write,
 270         .device =       usb_console_device,
 271         .setup =        usb_console_setup,
 272         .flags =        CON_PRINTBUFFER,
 273         .index =        -1,
 274         .data =         &usb_serial_tty_driver,
 275 };
 276
 277 void usb_serial_console_disconnect(struct usb_serial *serial)
 278 {
 279         if (serial && serial->port && serial->port[0]
 280                                 && serial->port[0] == usbcons_info.port) {
 281                 usb_serial_console_exit();
 282                 usb_serial_put(serial);
 283         }
 284 }
 285
 286 void usb_serial_console_init(int serial_debug, int minor)
 287 {
 288         debug = serial_debug;
 289
 290         if (minor == 0) {
 291                 /*
 292                  * Call register_console() if this is the first device plugged
 293                  * in.  If we call it earlier, then the callback to
 294                  * console_setup() will fail, as there is not a device seen by
 295                  * the USB subsystem yet.
 296                  */
 297                 /*
 298                  * Register console.
 299                  * NOTES:
 300                  * console_setup() is called (back) immediately (from
 301                  * register_console). console_write() is called immediately
 302                  * from register_console iff CON_PRINTBUFFER is set in flags.
 303                  */
 304                 dbg("registering the USB serial console.");
 305                 register_console(&usbcons);
 306         }
 307 }
 308
 309 void usb_serial_console_exit(void)
 310 {
 311         if (usbcons_info.port) {
 312                 unregister_console(&usbcons);
 313                 usbcons_info.port->port.console = 0;
 314                 usbcons_info.port = NULL;
 315         }
 316 }
 317