drivers/usb/serial/aircable.c

   1 /*
   2  * AIRcable USB Bluetooth Dongle Driver.
   3  *
   4  * Copyright (C) 2010 Johan Hovold <jhovold@gmail.com>
   5  * Copyright (C) 2006 Manuel Francisco Naranjo (naranjo.manuel@gmail.com)
   6  *
   7  * This program is free software; you can redistribute it and/or modify it under
   8  * the terms of the GNU General Public License version 2 as published by the
   9  * Free Software Foundation.
  10  *
  11  * The device works as an standard CDC device, it has 2 interfaces, the first
  12  * one is for firmware access and the second is the serial one.
  13  * The protocol is very simply, there are two posibilities reading or writing.
  14  * When writing the first urb must have a Header that starts with 0x20 0x29 the
  15  * next two bytes must say how much data will be sended.
  16  * When reading the process is almost equal except that the header starts with
  17  * 0x00 0x20.
  18  *
  19  * The device simply need some stuff to understand data coming from the usb
  20  * buffer: The First and Second byte is used for a Header, the Third and Fourth
  21  * tells the  device the amount of information the package holds.
  22  * Packages are 60 bytes long Header Stuff.
  23  * When writing to the device the first two bytes of the header are 0x20 0x29
  24  * When reading the bytes are 0x00 0x20, or 0x00 0x10, there is an strange
  25  * situation, when too much data arrives to the device because it sends the data
  26  * but with out the header. I will use a simply hack to override this situation,
  27  * if there is data coming that does not contain any header, then that is data
  28  * that must go directly to the tty, as there is no documentation about if there
  29  * is any other control code, I will simply check for the first
  30  * one.
  31  *
  32  * The driver registers himself with the USB-serial core and the USB Core. I had
  33  * to implement a probe function against USB-serial, because other way, the
  34  * driver was attaching himself to both interfaces. I have tryed with different
  35  * configurations of usb_serial_driver with out exit, only the probe function
  36  * could handle this correctly.
  37  *
  38  * I have taken some info from a Greg Kroah-Hartman article:
  39  * http://www.linuxjournal.com/article/6573
  40  * And from Linux Device Driver Kit CD, which is a great work, the authors taken
  41  * the work to recompile lots of information an knowladge in drivers development
  42  * and made it all avaible inside a cd.
  43  * URL: http://kernel.org/pub/linux/kernel/people/gregkh/ddk/
  44  *
  45  */
  46
  47 #include <asm/unaligned.h>
  48 #include <linux/tty.h>
  49 #include <linux/slab.h>
  50 #include <linux/tty_flip.h>
  51 #include <linux/usb.h>
  52 #include <linux/usb/serial.h>
  53
  54 static int debug;
  55
  56 /* Vendor and Product ID */
  57 #define AIRCABLE_VID            0x16CA
  58 #define AIRCABLE_USB_PID        0x1502
  59
  60 /* Protocol Stuff */
  61 #define HCI_HEADER_LENGTH       0x4
  62 #define TX_HEADER_0             0x20
  63 #define TX_HEADER_1             0x29
  64 #define RX_HEADER_0             0x00
  65 #define RX_HEADER_1             0x20
  66 #define HCI_COMPLETE_FRAME      64
  67
  68 /* rx_flags */
  69 #define THROTTLED               0x01
  70 #define ACTUALLY_THROTTLED      0x02
  71
  72 /*
  73  * Version Information
  74  */
  75 #define DRIVER_VERSION "v2.0"
  76 #define DRIVER_AUTHOR "Naranjo, Manuel Francisco <naranjo.manuel@gmail.com>, Johan Hovold <jhovold@gmail.com>"
  77 #define DRIVER_DESC "AIRcable USB Driver"
  78
  79 /* ID table that will be registered with USB core */
  80 static const struct usb_device_id id_table[] = {
  81         { USB_DEVICE(AIRCABLE_VID, AIRCABLE_USB_PID) },
  82         { },
  83 };
  84 MODULE_DEVICE_TABLE(usb, id_table);
  85
  86 static int aircable_prepare_write_buffer(struct usb_serial_port *port,
  87                                                 void *dest, size_t size)
  88 {
  89         int count;
  90         unsigned char *buf = dest;
  91
  92         count = kfifo_out_locked(&port->write_fifo, buf + HCI_HEADER_LENGTH,
  93                                         size - HCI_HEADER_LENGTH, &port->lock);
  94         buf[0] = TX_HEADER_0;
  95         buf[1] = TX_HEADER_1;
  96         put_unaligned_le16(count, &buf[2]);
  97
  98         return count + HCI_HEADER_LENGTH;
  99 }
 100
 101 static int aircable_probe(struct usb_serial *serial,
 102                           const struct usb_device_id *id)
 103 {
 104         struct usb_host_interface *iface_desc = serial->interface->
 105                                                                 cur_altsetting;
 106         struct usb_endpoint_descriptor *endpoint;
 107         int num_bulk_out = 0;
 108         int i;
 109
 110         for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
 111                 endpoint = &iface_desc->endpoint[i].desc;
 112                 if (usb_endpoint_is_bulk_out(endpoint)) {
 113                         dbg("found bulk out on endpoint %d", i);
 114                         ++num_bulk_out;
 115                 }
 116         }
 117
 118         if (num_bulk_out == 0) {
 119                 dbg("Invalid interface, discarding");
 120                 return -ENODEV;
 121         }
 122
 123         return 0;
 124 }
 125
 126 static int aircable_process_packet(struct tty_struct *tty,
 127                         struct usb_serial_port *port, int has_headers,
 128                         char *packet, int len)
 129 {
 130         if (has_headers) {
 131                 len -= HCI_HEADER_LENGTH;
 132                 packet += HCI_HEADER_LENGTH;
 133         }
 134         if (len <= 0) {
 135                 dbg("%s - malformed packet", __func__);
 136                 return 0;
 137         }
 138
 139         tty_insert_flip_string(tty, packet, len);
 140
 141         return len;
 142 }
 143
 144 static void aircable_process_read_urb(struct urb *urb)
 145 {
 146         struct usb_serial_port *port = urb->context;
 147         char *data = (char *)urb->transfer_buffer;
 148         struct tty_struct *tty;
 149         int has_headers;
 150         int count;
 151         int len;
 152         int i;
 153
 154         tty = tty_port_tty_get(&port->port);
 155         if (!tty)
 156                 return;
 157
 158         has_headers = (urb->actual_length > 2 && data[0] == RX_HEADER_0);
 159
 160         count = 0;
 161         for (i = 0; i < urb->actual_length; i += HCI_COMPLETE_FRAME) {
 162                 len = min_t(int, urb->actual_length - i, HCI_COMPLETE_FRAME);
 163                 count += aircable_process_packet(tty, port, has_headers,
 164                                                                 &data[i], len);
 165         }
 166
 167         if (count)
 168                 tty_flip_buffer_push(tty);
 169         tty_kref_put(tty);
 170 }
 171
 172 static struct usb_driver aircable_driver = {
 173         .name =         "aircable",
 174         .probe =        usb_serial_probe,
 175         .disconnect =   usb_serial_disconnect,
 176         .id_table =     id_table,
 177         .no_dynamic_id =        1,
 178 };
 179
 180 static struct usb_serial_driver aircable_device = {
 181         .driver = {
 182                 .owner =        THIS_MODULE,
 183                 .name =         "aircable",
 184         },
 185         .usb_driver =           &aircable_driver,
 186         .id_table =             id_table,
 187         .num_ports =            1,
 188         .bulk_out_size =        HCI_COMPLETE_FRAME,
 189         .probe =                aircable_probe,
 190         .process_read_urb =     aircable_process_read_urb,
 191         .prepare_write_buffer = aircable_prepare_write_buffer,
 192         .throttle =             usb_serial_generic_throttle,
 193         .unthrottle =           usb_serial_generic_unthrottle,
 194 };
 195
 196 static int __init aircable_init(void)
 197 {
 198         int retval;
 199         retval = usb_serial_register(&aircable_device);
 200         if (retval)
 201                 goto failed_serial_register;
 202         retval = usb_register(&aircable_driver);
 203         if (retval)
 204                 goto failed_usb_register;
 205         return 0;
 206
 207 failed_usb_register:
 208         usb_serial_deregister(&aircable_device);
 209 failed_serial_register:
 210         return retval;
 211 }
 212
 213 static void __exit aircable_exit(void)
 214 {
 215         usb_deregister(&aircable_driver);
 216         usb_serial_deregister(&aircable_device);
 217 }
 218
 219 MODULE_AUTHOR(DRIVER_AUTHOR);
 220 MODULE_DESCRIPTION(DRIVER_DESC);
 221 MODULE_VERSION(DRIVER_VERSION);
 222 MODULE_LICENSE("GPL");
 223
 224 module_init(aircable_init);
 225 module_exit(aircable_exit);
 226
 227 module_param(debug, bool, S_IRUGO | S_IWUSR);
 228 MODULE_PARM_DESC(debug, "Debug enabled or not");