drivers/usb/misc/appledisplay.c

   1 /*
   2  * Apple Cinema Display driver
   3  *
   4  * Copyright (C) 2006  Michael Hanselmann (linux-kernel@hansmi.ch)
   5  *
   6  * Thanks to Caskey L. Dickson for his work with acdctl.
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  21  */
  22
  23 #include <linux/kernel.h>
  24 #include <linux/errno.h>
  25 #include <linux/init.h>
  26 #include <linux/module.h>
  27 #include <linux/slab.h>
  28 #include <linux/usb.h>
  29 #include <linux/backlight.h>
  30 #include <linux/timer.h>
  31 #include <linux/workqueue.h>
  32 #include <linux/atomic.h>
  33
  34 #define APPLE_VENDOR_ID         0x05AC
  35
  36 #define USB_REQ_GET_REPORT      0x01
  37 #define USB_REQ_SET_REPORT      0x09
  38
  39 #define ACD_USB_TIMEOUT         250
  40
  41 #define ACD_USB_EDID            0x0302
  42 #define ACD_USB_BRIGHTNESS      0x0310
  43
  44 #define ACD_BTN_NONE            0
  45 #define ACD_BTN_BRIGHT_UP       3
  46 #define ACD_BTN_BRIGHT_DOWN     4
  47
  48 #define ACD_URB_BUFFER_LEN      2
  49 #define ACD_MSG_BUFFER_LEN      2
  50
  51 #define APPLEDISPLAY_DEVICE(prod)                               \
  52         .match_flags = USB_DEVICE_ID_MATCH_DEVICE |             \
  53                        USB_DEVICE_ID_MATCH_INT_CLASS |          \
  54                        USB_DEVICE_ID_MATCH_INT_PROTOCOL,        \
  55         .idVendor = APPLE_VENDOR_ID,                            \
  56         .idProduct = (prod),                                    \
  57         .bInterfaceClass = USB_CLASS_HID,                       \
  58         .bInterfaceProtocol = 0x00
  59
  60 /* table of devices that work with this driver */
  61 static const struct usb_device_id appledisplay_table[] = {
  62         { APPLEDISPLAY_DEVICE(0x9218) },
  63         { APPLEDISPLAY_DEVICE(0x9219) },
  64         { APPLEDISPLAY_DEVICE(0x921c) },
  65         { APPLEDISPLAY_DEVICE(0x921d) },
  66         { APPLEDISPLAY_DEVICE(0x9236) },
  67
  68         /* Terminating entry */
  69         { }
  70 };
  71 MODULE_DEVICE_TABLE(usb, appledisplay_table);
  72
  73 /* Structure to hold all of our device specific stuff */
  74 struct appledisplay {
  75         struct usb_device *udev;        /* usb device */
  76         struct urb *urb;                /* usb request block */
  77         struct backlight_device *bd;    /* backlight device */
  78         u8 *urbdata;                    /* interrupt URB data buffer */
  79         u8 *msgdata;                    /* control message data buffer */
  80
  81         struct delayed_work work;
  82         int button_pressed;
  83         spinlock_t lock;
  84 };
  85
  86 static atomic_t count_displays = ATOMIC_INIT(0);
  87 static struct workqueue_struct *wq;
  88
  89 static void appledisplay_complete(struct urb *urb)
  90 {
  91         struct appledisplay *pdata = urb->context;
  92         unsigned long flags;
  93         int status = urb->status;
  94         int retval;
  95
  96         switch (status) {
  97         case 0:
  98                 /* success */
  99                 break;
 100         case -EOVERFLOW:
 101                 printk(KERN_ERR "appletouch: OVERFLOW with data "
 102                         "length %d, actual length is %d\n",
 103                         ACD_URB_BUFFER_LEN, pdata->urb->actual_length);
 104         case -ECONNRESET:
 105         case -ENOENT:
 106         case -ESHUTDOWN:
 107                 /* This urb is terminated, clean up */
 108                 dbg("%s - urb shuttingdown with status: %d",
 109                         __func__, status);
 110                 return;
 111         default:
 112                 dbg("%s - nonzero urb status received: %d",
 113                         __func__, status);
 114                 goto exit;
 115         }
 116
 117         spin_lock_irqsave(&pdata->lock, flags);
 118
 119         switch(pdata->urbdata[1]) {
 120         case ACD_BTN_BRIGHT_UP:
 121         case ACD_BTN_BRIGHT_DOWN:
 122                 pdata->button_pressed = 1;
 123                 queue_delayed_work(wq, &pdata->work, 0);
 124                 break;
 125         case ACD_BTN_NONE:
 126         default:
 127                 pdata->button_pressed = 0;
 128                 break;
 129         }
 130
 131         spin_unlock_irqrestore(&pdata->lock, flags);
 132
 133 exit:
 134         retval = usb_submit_urb(pdata->urb, GFP_ATOMIC);
 135         if (retval) {
 136                 dev_err(&pdata->udev->dev,
 137                         "%s - usb_submit_urb failed with result %d\n",
 138                         __func__, retval);
 139         }
 140 }
 141
 142 static int appledisplay_bl_update_status(struct backlight_device *bd)
 143 {
 144         struct appledisplay *pdata = bl_get_data(bd);
 145         int retval;
 146
 147         pdata->msgdata[0] = 0x10;
 148         pdata->msgdata[1] = bd->props.brightness;
 149
 150         retval = usb_control_msg(
 151                 pdata->udev,
 152                 usb_sndctrlpipe(pdata->udev, 0),
 153                 USB_REQ_SET_REPORT,
 154                 USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 155                 ACD_USB_BRIGHTNESS,
 156                 0,
 157                 pdata->msgdata, 2,
 158                 ACD_USB_TIMEOUT);
 159
 160         return retval;
 161 }
 162
 163 static int appledisplay_bl_get_brightness(struct backlight_device *bd)
 164 {
 165         struct appledisplay *pdata = bl_get_data(bd);
 166         int retval;
 167
 168         retval = usb_control_msg(
 169                 pdata->udev,
 170                 usb_rcvctrlpipe(pdata->udev, 0),
 171                 USB_REQ_GET_REPORT,
 172                 USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 173                 ACD_USB_BRIGHTNESS,
 174                 0,
 175                 pdata->msgdata, 2,
 176                 ACD_USB_TIMEOUT);
 177
 178         if (retval < 0)
 179                 return retval;
 180         else
 181                 return pdata->msgdata[1];
 182 }
 183
 184 static const struct backlight_ops appledisplay_bl_data = {
 185         .get_brightness = appledisplay_bl_get_brightness,
 186         .update_status  = appledisplay_bl_update_status,
 187 };
 188
 189 static void appledisplay_work(struct work_struct *work)
 190 {
 191         struct appledisplay *pdata =
 192                 container_of(work, struct appledisplay, work.work);
 193         int retval;
 194
 195         retval = appledisplay_bl_get_brightness(pdata->bd);
 196         if (retval >= 0)
 197                 pdata->bd->props.brightness = retval;
 198
 199         /* Poll again in about 125ms if there's still a button pressed */
 200         if (pdata->button_pressed)
 201                 schedule_delayed_work(&pdata->work, HZ / 8);
 202 }
 203
 204 static int appledisplay_probe(struct usb_interface *iface,
 205         const struct usb_device_id *id)
 206 {
 207         struct backlight_properties props;
 208         struct appledisplay *pdata;
 209         struct usb_device *udev = interface_to_usbdev(iface);
 210         struct usb_host_interface *iface_desc;
 211         struct usb_endpoint_descriptor *endpoint;
 212         int int_in_endpointAddr = 0;
 213         int i, retval = -ENOMEM, brightness;
 214         char bl_name[20];
 215
 216         /* set up the endpoint information */
 217         /* use only the first interrupt-in endpoint */
 218         iface_desc = iface->cur_altsetting;
 219         for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
 220                 endpoint = &iface_desc->endpoint[i].desc;
 221                 if (!int_in_endpointAddr && usb_endpoint_is_int_in(endpoint)) {
 222                         /* we found an interrupt in endpoint */
 223                         int_in_endpointAddr = endpoint->bEndpointAddress;
 224                         break;
 225                 }
 226         }
 227         if (!int_in_endpointAddr) {
 228                 dev_err(&iface->dev, "Could not find int-in endpoint\n");
 229                 return -EIO;
 230         }
 231
 232         /* allocate memory for our device state and initialize it */
 233         pdata = kzalloc(sizeof(struct appledisplay), GFP_KERNEL);
 234         if (!pdata) {
 235                 retval = -ENOMEM;
 236                 dev_err(&iface->dev, "Out of memory\n");
 237                 goto error;
 238         }
 239
 240         pdata->udev = udev;
 241
 242         spin_lock_init(&pdata->lock);
 243         INIT_DELAYED_WORK(&pdata->work, appledisplay_work);
 244
 245         /* Allocate buffer for control messages */
 246         pdata->msgdata = kmalloc(ACD_MSG_BUFFER_LEN, GFP_KERNEL);
 247         if (!pdata->msgdata) {
 248                 retval = -ENOMEM;
 249                 dev_err(&iface->dev,
 250                         "Allocating buffer for control messages failed\n");
 251                 goto error;
 252         }
 253
 254         /* Allocate interrupt URB */
 255         pdata->urb = usb_alloc_urb(0, GFP_KERNEL);
 256         if (!pdata->urb) {
 257                 retval = -ENOMEM;
 258                 dev_err(&iface->dev, "Allocating URB failed\n");
 259                 goto error;
 260         }
 261
 262         /* Allocate buffer for interrupt data */
 263         pdata->urbdata = usb_alloc_coherent(pdata->udev, ACD_URB_BUFFER_LEN,
 264                 GFP_KERNEL, &pdata->urb->transfer_dma);
 265         if (!pdata->urbdata) {
 266                 retval = -ENOMEM;
 267                 dev_err(&iface->dev, "Allocating URB buffer failed\n");
 268                 goto error;
 269         }
 270
 271         /* Configure interrupt URB */
 272         usb_fill_int_urb(pdata->urb, udev,
 273                 usb_rcvintpipe(udev, int_in_endpointAddr),
 274                 pdata->urbdata, ACD_URB_BUFFER_LEN, appledisplay_complete,
 275                 pdata, 1);
 276         if (usb_submit_urb(pdata->urb, GFP_KERNEL)) {
 277                 retval = -EIO;
 278                 dev_err(&iface->dev, "Submitting URB failed\n");
 279                 goto error;
 280         }
 281
 282         /* Register backlight device */
 283         snprintf(bl_name, sizeof(bl_name), "appledisplay%d",
 284                 atomic_inc_return(&count_displays) - 1);
 285         memset(&props, 0, sizeof(struct backlight_properties));
 286         props.type = BACKLIGHT_RAW;
 287         props.max_brightness = 0xff;
 288         pdata->bd = backlight_device_register(bl_name, NULL, pdata,
 289                                               &appledisplay_bl_data, &props);
 290         if (IS_ERR(pdata->bd)) {
 291                 dev_err(&iface->dev, "Backlight registration failed\n");
 292                 retval = PTR_ERR(pdata->bd);
 293                 goto error;
 294         }
 295
 296         /* Try to get brightness */
 297         brightness = appledisplay_bl_get_brightness(pdata->bd);
 298
 299         if (brightness < 0) {
 300                 retval = brightness;
 301                 dev_err(&iface->dev,
 302                         "Error while getting initial brightness: %d\n", retval);
 303                 goto error;
 304         }
 305
 306         /* Set brightness in backlight device */
 307         pdata->bd->props.brightness = brightness;
 308
 309         /* save our data pointer in the interface device */
 310         usb_set_intfdata(iface, pdata);
 311
 312         printk(KERN_INFO "appledisplay: Apple Cinema Display connected\n");
 313
 314         return 0;
 315
 316 error:
 317         if (pdata) {
 318                 if (pdata->urb) {
 319                         usb_kill_urb(pdata->urb);
 320                         if (pdata->urbdata)
 321                                 usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN,
 322                                         pdata->urbdata, pdata->urb->transfer_dma);
 323                         usb_free_urb(pdata->urb);
 324                 }
 325                 if (pdata->bd && !IS_ERR(pdata->bd))
 326                         backlight_device_unregister(pdata->bd);
 327                 kfree(pdata->msgdata);
 328         }
 329         usb_set_intfdata(iface, NULL);
 330         kfree(pdata);
 331         return retval;
 332 }
 333
 334 static void appledisplay_disconnect(struct usb_interface *iface)
 335 {
 336         struct appledisplay *pdata = usb_get_intfdata(iface);
 337
 338         if (pdata) {
 339                 usb_kill_urb(pdata->urb);
 340                 cancel_delayed_work(&pdata->work);
 341                 backlight_device_unregister(pdata->bd);
 342                 usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN,
 343                         pdata->urbdata, pdata->urb->transfer_dma);
 344                 usb_free_urb(pdata->urb);
 345                 kfree(pdata->msgdata);
 346                 kfree(pdata);
 347         }
 348
 349         printk(KERN_INFO "appledisplay: Apple Cinema Display disconnected\n");
 350 }
 351
 352 static struct usb_driver appledisplay_driver = {
 353         .name           = "appledisplay",
 354         .probe          = appledisplay_probe,
 355         .disconnect     = appledisplay_disconnect,
 356         .id_table       = appledisplay_table,
 357 };
 358
 359 static int __init appledisplay_init(void)
 360 {
 361         wq = create_singlethread_workqueue("appledisplay");
 362         if (!wq) {
 363                 printk(KERN_ERR "appledisplay: Could not create work queue\n");
 364                 return -ENOMEM;
 365         }
 366
 367         return usb_register(&appledisplay_driver);
 368 }
 369
 370 static void __exit appledisplay_exit(void)
 371 {
 372         flush_workqueue(wq);
 373         destroy_workqueue(wq);
 374         usb_deregister(&appledisplay_driver);
 375 }
 376
 377 MODULE_AUTHOR("Michael Hanselmann");
 378 MODULE_DESCRIPTION("Apple Cinema Display driver");
 379 MODULE_LICENSE("GPL");
 380
 381 module_init(appledisplay_init);
 382 module_exit(appledisplay_exit);