drivers/usb/host/xhci-ring.c

   1 /*
   2  * xHCI host controller driver
   3  *
   4  * Copyright (C) 2008 Intel Corp.
   5  *
   6  * Author: Sarah Sharp
   7  * Some code borrowed from the Linux EHCI driver.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  *
  13  * This program is distributed in the hope that it will be useful, but
  14  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  15  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  16  * for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software Foundation,
  20  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21  */
  22
  23 /*
  24  * Ring initialization rules:
  25  * 1. Each segment is initialized to zero, except for link TRBs.
  26  * 2. Ring cycle state = 0.  This represents Producer Cycle State (PCS) or
  27  *    Consumer Cycle State (CCS), depending on ring function.
  28  * 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment.
  29  *
  30  * Ring behavior rules:
  31  * 1. A ring is empty if enqueue == dequeue.  This means there will always be at
  32  *    least one free TRB in the ring.  This is useful if you want to turn that
  33  *    into a link TRB and expand the ring.
  34  * 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a
  35  *    link TRB, then load the pointer with the address in the link TRB.  If the
  36  *    link TRB had its toggle bit set, you may need to update the ring cycle
  37  *    state (see cycle bit rules).  You may have to do this multiple times
  38  *    until you reach a non-link TRB.
  39  * 3. A ring is full if enqueue++ (for the definition of increment above)
  40  *    equals the dequeue pointer.
  41  *
  42  * Cycle bit rules:
  43  * 1. When a consumer increments a dequeue pointer and encounters a toggle bit
  44  *    in a link TRB, it must toggle the ring cycle state.
  45  * 2. When a producer increments an enqueue pointer and encounters a toggle bit
  46  *    in a link TRB, it must toggle the ring cycle state.
  47  *
  48  * Producer rules:
  49  * 1. Check if ring is full before you enqueue.
  50  * 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing.
  51  *    Update enqueue pointer between each write (which may update the ring
  52  *    cycle state).
  53  * 3. Notify consumer.  If SW is producer, it rings the doorbell for command
  54  *    and endpoint rings.  If HC is the producer for the event ring,
  55  *    and it generates an interrupt according to interrupt modulation rules.
  56  *
  57  * Consumer rules:
  58  * 1. Check if TRB belongs to you.  If the cycle bit == your ring cycle state,
  59  *    the TRB is owned by the consumer.
  60  * 2. Update dequeue pointer (which may update the ring cycle state) and
  61  *    continue processing TRBs until you reach a TRB which is not owned by you.
  62  * 3. Notify the producer.  SW is the consumer for the event ring, and it
  63  *   updates event ring dequeue pointer.  HC is the consumer for the command and
  64  *   endpoint rings; it generates events on the event ring for these.
  65  */
  66
  67 #include <linux/scatterlist.h>
  68 #include <linux/slab.h>
  69 #include "xhci.h"
  70
  71 static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
  72                 struct xhci_virt_device *virt_dev,
  73                 struct xhci_event_cmd *event);
  74
  75 /*
  76  * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
  77  * address of the TRB.
  78  */
  79 dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg,
  80                 union xhci_trb *trb)
  81 {
  82         unsigned long segment_offset;
  83
  84         if (!seg || !trb || trb < seg->trbs)
  85                 return 0;
  86         /* offset in TRBs */
  87         segment_offset = trb - seg->trbs;
  88         if (segment_offset > TRBS_PER_SEGMENT)
  89                 return 0;
  90         return seg->dma + (segment_offset * sizeof(*trb));
  91 }
  92
  93 /* Does this link TRB point to the first segment in a ring,
  94  * or was the previous TRB the last TRB on the last segment in the ERST?
  95  */
  96 static bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring *ring,
  97                 struct xhci_segment *seg, union xhci_trb *trb)
  98 {
  99         if (ring == xhci->event_ring)
 100                 return (trb == &seg->trbs[TRBS_PER_SEGMENT]) &&
 101                         (seg->next == xhci->event_ring->first_seg);
 102         else
 103                 return le32_to_cpu(trb->link.control) & LINK_TOGGLE;
 104 }
 105
 106 /* Is this TRB a link TRB or was the last TRB the last TRB in this event ring
 107  * segment?  I.e. would the updated event TRB pointer step off the end of the
 108  * event seg?
 109  */
 110 static int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
 111                 struct xhci_segment *seg, union xhci_trb *trb)
 112 {
 113         if (ring == xhci->event_ring)
 114                 return trb == &seg->trbs[TRBS_PER_SEGMENT];
 115         else
 116                 return (le32_to_cpu(trb->link.control) & TRB_TYPE_BITMASK)
 117                         == TRB_TYPE(TRB_LINK);
 118 }
 119
 120 static int enqueue_is_link_trb(struct xhci_ring *ring)
 121 {
 122         struct xhci_link_trb *link = &ring->enqueue->link;
 123         return ((le32_to_cpu(link->control) & TRB_TYPE_BITMASK) ==
 124                 TRB_TYPE(TRB_LINK));
 125 }
 126
 127 /* Updates trb to point to the next TRB in the ring, and updates seg if the next
 128  * TRB is in a new segment.  This does not skip over link TRBs, and it does not
 129  * effect the ring dequeue or enqueue pointers.
 130  */
 131 static void next_trb(struct xhci_hcd *xhci,
 132                 struct xhci_ring *ring,
 133                 struct xhci_segment **seg,
 134                 union xhci_trb **trb)
 135 {
 136         if (last_trb(xhci, ring, *seg, *trb)) {
 137                 *seg = (*seg)->next;
 138                 *trb = ((*seg)->trbs);
 139         } else {
 140                 (*trb)++;
 141         }
 142 }
 143
 144 /*
 145  * See Cycle bit rules. SW is the consumer for the event ring only.
 146  * Don't make a ring full of link TRBs.  That would be dumb and this would loop.
 147  */
 148 static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
 149 {
 150         union xhci_trb *next = ++(ring->dequeue);
 151         unsigned long long addr;
 152
 153         ring->deq_updates++;
 154         /* Update the dequeue pointer further if that was a link TRB or we're at
 155          * the end of an event ring segment (which doesn't have link TRBS)
 156          */
 157         while (last_trb(xhci, ring, ring->deq_seg, next)) {
 158                 if (consumer && last_trb_on_last_seg(xhci, ring, ring->deq_seg, next)) {
 159                         ring->cycle_state = (ring->cycle_state ? 0 : 1);
 160                         if (!in_interrupt())
 161                                 xhci_dbg(xhci, "Toggle cycle state for ring %p = %i\n",
 162                                                 ring,
 163                                                 (unsigned int) ring->cycle_state);
 164                 }
 165                 ring->deq_seg = ring->deq_seg->next;
 166                 ring->dequeue = ring->deq_seg->trbs;
 167                 next = ring->dequeue;
 168         }
 169         addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue);
 170 }
 171
 172 /*
 173  * See Cycle bit rules. SW is the consumer for the event ring only.
 174  * Don't make a ring full of link TRBs.  That would be dumb and this would loop.
 175  *
 176  * If we've just enqueued a TRB that is in the middle of a TD (meaning the
 177  * chain bit is set), then set the chain bit in all the following link TRBs.
 178  * If we've enqueued the last TRB in a TD, make sure the following link TRBs
 179  * have their chain bit cleared (so that each Link TRB is a separate TD).
 180  *
 181  * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
 182  * set, but other sections talk about dealing with the chain bit set.  This was
 183  * fixed in the 0.96 specification errata, but we have to assume that all 0.95
 184  * xHCI hardware can't handle the chain bit being cleared on a link TRB.
 185  *
 186  * @more_trbs_coming:   Will you enqueue more TRBs before calling
 187  *                      prepare_transfer()?
 188  */
 189 static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
 190                 bool consumer, bool more_trbs_coming)
 191 {
 192         u32 chain;
 193         union xhci_trb *next;
 194         unsigned long long addr;
 195
 196         chain = le32_to_cpu(ring->enqueue->generic.field[3]) & TRB_CHAIN;
 197         next = ++(ring->enqueue);
 198
 199         ring->enq_updates++;
 200         /* Update the dequeue pointer further if that was a link TRB or we're at
 201          * the end of an event ring segment (which doesn't have link TRBS)
 202          */
 203         while (last_trb(xhci, ring, ring->enq_seg, next)) {
 204                 if (!consumer) {
 205                         if (ring != xhci->event_ring) {
 206                                 /*
 207                                  * If the caller doesn't plan on enqueueing more
 208                                  * TDs before ringing the doorbell, then we
 209                                  * don't want to give the link TRB to the
 210                                  * hardware just yet.  We'll give the link TRB
 211                                  * back in prepare_ring() just before we enqueue
 212                                  * the TD at the top of the ring.
 213                                  */
 214                                 if (!chain && !more_trbs_coming)
 215                                         break;
 216
 217                                 /* If we're not dealing with 0.95 hardware,
 218                                  * carry over the chain bit of the previous TRB
 219                                  * (which may mean the chain bit is cleared).
 220                                  */
 221                                 if (!xhci_link_trb_quirk(xhci)) {
 222                                         next->link.control &=
 223                                                 cpu_to_le32(~TRB_CHAIN);
 224                                         next->link.control |=
 225                                                 cpu_to_le32(chain);
 226                                 }
 227                                 /* Give this link TRB to the hardware */
 228                                 wmb();
 229                                 next->link.control ^= cpu_to_le32(TRB_CYCLE);
 230                         }
 231                         /* Toggle the cycle bit after the last ring segment. */
 232                         if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
 233                                 ring->cycle_state = (ring->cycle_state ? 0 : 1);
 234                                 if (!in_interrupt())
 235                                         xhci_dbg(xhci, "Toggle cycle state for ring %p = %i\n",
 236                                                         ring,
 237                                                         (unsigned int) ring->cycle_state);
 238                         }
 239                 }
 240                 ring->enq_seg = ring->enq_seg->next;
 241                 ring->enqueue = ring->enq_seg->trbs;
 242                 next = ring->enqueue;
 243         }
 244         addr = (unsigned long long) xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue);
 245 }
 246
 247 /*
 248  * Check to see if there's room to enqueue num_trbs on the ring.  See rules
 249  * above.
 250  * FIXME: this would be simpler and faster if we just kept track of the number
 251  * of free TRBs in a ring.
 252  */
 253 static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
 254                 unsigned int num_trbs)
 255 {
 256         int i;
 257         union xhci_trb *enq = ring->enqueue;
 258         struct xhci_segment *enq_seg = ring->enq_seg;
 259         struct xhci_segment *cur_seg;
 260         unsigned int left_on_ring;
 261
 262         /* If we are currently pointing to a link TRB, advance the
 263          * enqueue pointer before checking for space */
 264         while (last_trb(xhci, ring, enq_seg, enq)) {
 265                 enq_seg = enq_seg->next;
 266                 enq = enq_seg->trbs;
 267         }
 268
 269         /* Check if ring is empty */
 270         if (enq == ring->dequeue) {
 271                 /* Can't use link trbs */
 272                 left_on_ring = TRBS_PER_SEGMENT - 1;
 273                 for (cur_seg = enq_seg->next; cur_seg != enq_seg;
 274                                 cur_seg = cur_seg->next)
 275                         left_on_ring += TRBS_PER_SEGMENT - 1;
 276
 277                 /* Always need one TRB free in the ring. */
 278                 left_on_ring -= 1;
 279                 if (num_trbs > left_on_ring) {
 280                         xhci_warn(xhci, "Not enough room on ring; "
 281                                         "need %u TRBs, %u TRBs left\n",
 282                                         num_trbs, left_on_ring);
 283                         return 0;
 284                 }
 285                 return 1;
 286         }
 287         /* Make sure there's an extra empty TRB available */
 288         for (i = 0; i <= num_trbs; ++i) {
 289                 if (enq == ring->dequeue)
 290                         return 0;
 291                 enq++;
 292                 while (last_trb(xhci, ring, enq_seg, enq)) {
 293                         enq_seg = enq_seg->next;
 294                         enq = enq_seg->trbs;
 295                 }
 296         }
 297         return 1;
 298 }
 299
 300 /* Ring the host controller doorbell after placing a command on the ring */
 301 void xhci_ring_cmd_db(struct xhci_hcd *xhci)
 302 {
 303         xhci_dbg(xhci, "// Ding dong!\n");
 304         xhci_writel(xhci, DB_VALUE_HOST, &xhci->dba->doorbell[0]);
 305         /* Flush PCI posted writes */
 306         xhci_readl(xhci, &xhci->dba->doorbell[0]);
 307 }
 308
 309 void xhci_ring_ep_doorbell(struct xhci_hcd *xhci,
 310                 unsigned int slot_id,
 311                 unsigned int ep_index,
 312                 unsigned int stream_id)
 313 {
 314         __le32 __iomem *db_addr = &xhci->dba->doorbell[slot_id];
 315         struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
 316         unsigned int ep_state = ep->ep_state;
 317
 318         /* Don't ring the doorbell for this endpoint if there are pending
 319          * cancellations because we don't want to interrupt processing.
 320          * We don't want to restart any stream rings if there's a set dequeue
 321          * pointer command pending because the device can choose to start any
 322          * stream once the endpoint is on the HW schedule.
 323          * FIXME - check all the stream rings for pending cancellations.
 324          */
 325         if ((ep_state & EP_HALT_PENDING) || (ep_state & SET_DEQ_PENDING) ||
 326             (ep_state & EP_HALTED))
 327                 return;
 328         xhci_writel(xhci, DB_VALUE(ep_index, stream_id), db_addr);
 329         /* The CPU has better things to do at this point than wait for a
 330          * write-posting flush.  It'll get there soon enough.
 331          */
 332 }
 333
 334 /* Ring the doorbell for any rings with pending URBs */
 335 static void ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
 336                 unsigned int slot_id,
 337                 unsigned int ep_index)
 338 {
 339         unsigned int stream_id;
 340         struct xhci_virt_ep *ep;
 341
 342         ep = &xhci->devs[slot_id]->eps[ep_index];
 343
 344         /* A ring has pending URBs if its TD list is not empty */
 345         if (!(ep->ep_state & EP_HAS_STREAMS)) {
 346                 if (!(list_empty(&ep->ring->td_list)))
 347                         xhci_ring_ep_doorbell(xhci, slot_id, ep_index, 0);
 348                 return;
 349         }
 350
 351         for (stream_id = 1; stream_id < ep->stream_info->num_streams;
 352                         stream_id++) {
 353                 struct xhci_stream_info *stream_info = ep->stream_info;
 354                 if (!list_empty(&stream_info->stream_rings[stream_id]->td_list))
 355                         xhci_ring_ep_doorbell(xhci, slot_id, ep_index,
 356                                                 stream_id);
 357         }
 358 }
 359
 360 /*
 361  * Find the segment that trb is in.  Start searching in start_seg.
 362  * If we must move past a segment that has a link TRB with a toggle cycle state
 363  * bit set, then we will toggle the value pointed at by cycle_state.
 364  */
 365 static struct xhci_segment *find_trb_seg(
 366                 struct xhci_segment *start_seg,
 367                 union xhci_trb  *trb, int *cycle_state)
 368 {
 369         struct xhci_segment *cur_seg = start_seg;
 370         struct xhci_generic_trb *generic_trb;
 371
 372         while (cur_seg->trbs > trb ||
 373                         &cur_seg->trbs[TRBS_PER_SEGMENT - 1] < trb) {
 374                 generic_trb = &cur_seg->trbs[TRBS_PER_SEGMENT - 1].generic;
 375                 if (le32_to_cpu(generic_trb->field[3]) & LINK_TOGGLE)
 376                         *cycle_state ^= 0x1;
 377                 cur_seg = cur_seg->next;
 378                 if (cur_seg == start_seg)
 379                         /* Looped over the entire list.  Oops! */
 380                         return NULL;
 381         }
 382         return cur_seg;
 383 }
 384
 385
 386 static struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
 387                 unsigned int slot_id, unsigned int ep_index,
 388                 unsigned int stream_id)
 389 {
 390         struct xhci_virt_ep *ep;
 391
 392         ep = &xhci->devs[slot_id]->eps[ep_index];
 393         /* Common case: no streams */
 394         if (!(ep->ep_state & EP_HAS_STREAMS))
 395                 return ep->ring;
 396
 397         if (stream_id == 0) {
 398                 xhci_warn(xhci,
 399                                 "WARN: Slot ID %u, ep index %u has streams, "
 400                                 "but URB has no stream ID.\n",
 401                                 slot_id, ep_index);
 402                 return NULL;
 403         }
 404
 405         if (stream_id < ep->stream_info->num_streams)
 406                 return ep->stream_info->stream_rings[stream_id];
 407
 408         xhci_warn(xhci,
 409                         "WARN: Slot ID %u, ep index %u has "
 410                         "stream IDs 1 to %u allocated, "
 411                         "but stream ID %u is requested.\n",
 412                         slot_id, ep_index,
 413                         ep->stream_info->num_streams - 1,
 414                         stream_id);
 415         return NULL;
 416 }
 417
 418 /* Get the right ring for the given URB.
 419  * If the endpoint supports streams, boundary check the URB's stream ID.
 420  * If the endpoint doesn't support streams, return the singular endpoint ring.
 421  */
 422 static struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
 423                 struct urb *urb)
 424 {
 425         return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id,
 426                 xhci_get_endpoint_index(&urb->ep->desc), urb->stream_id);
 427 }
 428
 429 /*
 430  * Move the xHC's endpoint ring dequeue pointer past cur_td.
 431  * Record the new state of the xHC's endpoint ring dequeue segment,
 432  * dequeue pointer, and new consumer cycle state in state.
 433  * Update our internal representation of the ring's dequeue pointer.
 434  *
 435  * We do this in three jumps:
 436  *  - First we update our new ring state to be the same as when the xHC stopped.
 437  *  - Then we traverse the ring to find the segment that contains
 438  *    the last TRB in the TD.  We toggle the xHC's new cycle state when we pass
 439  *    any link TRBs with the toggle cycle bit set.
 440  *  - Finally we move the dequeue state one TRB further, toggling the cycle bit
 441  *    if we've moved it past a link TRB with the toggle cycle bit set.
 442  *
 443  * Some of the uses of xhci_generic_trb are grotty, but if they're done
 444  * with correct __le32 accesses they should work fine.  Only users of this are
 445  * in here.
 446  */
 447 void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 448                 unsigned int slot_id, unsigned int ep_index,
 449                 unsigned int stream_id, struct xhci_td *cur_td,
 450                 struct xhci_dequeue_state *state)
 451 {
 452         struct xhci_virt_device *dev = xhci->devs[slot_id];
 453         struct xhci_ring *ep_ring;
 454         struct xhci_generic_trb *trb;
 455         struct xhci_ep_ctx *ep_ctx;
 456         dma_addr_t addr;
 457
 458         ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
 459                         ep_index, stream_id);
 460         if (!ep_ring) {
 461                 xhci_warn(xhci, "WARN can't find new dequeue state "
 462                                 "for invalid stream ID %u.\n",
 463                                 stream_id);
 464                 return;
 465         }
 466         state->new_cycle_state = 0;
 467         xhci_dbg(xhci, "Finding segment containing stopped TRB.\n");
 468         state->new_deq_seg = find_trb_seg(cur_td->start_seg,
 469                         dev->eps[ep_index].stopped_trb,
 470                         &state->new_cycle_state);
 471         if (!state->new_deq_seg) {
 472                 WARN_ON(1);
 473                 return;
 474         }
 475
 476         /* Dig out the cycle state saved by the xHC during the stop ep cmd */
 477         xhci_dbg(xhci, "Finding endpoint context\n");
 478         ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
 479         state->new_cycle_state = 0x1 & le64_to_cpu(ep_ctx->deq);
 480
 481         state->new_deq_ptr = cur_td->last_trb;
 482         xhci_dbg(xhci, "Finding segment containing last TRB in TD.\n");
 483         state->new_deq_seg = find_trb_seg(state->new_deq_seg,
 484                         state->new_deq_ptr,
 485                         &state->new_cycle_state);
 486         if (!state->new_deq_seg) {
 487                 WARN_ON(1);
 488                 return;
 489         }
 490
 491         trb = &state->new_deq_ptr->generic;
 492         if ((le32_to_cpu(trb->field[3]) & TRB_TYPE_BITMASK) ==
 493             TRB_TYPE(TRB_LINK) && (le32_to_cpu(trb->field[3]) & LINK_TOGGLE))
 494                 state->new_cycle_state ^= 0x1;
 495         next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
 496
 497         /*
 498          * If there is only one segment in a ring, find_trb_seg()'s while loop
 499          * will not run, and it will return before it has a chance to see if it
 500          * needs to toggle the cycle bit.  It can't tell if the stalled transfer
 501          * ended just before the link TRB on a one-segment ring, or if the TD
 502          * wrapped around the top of the ring, because it doesn't have the TD in
 503          * question.  Look for the one-segment case where stalled TRB's address
 504          * is greater than the new dequeue pointer address.
 505          */
 506         if (ep_ring->first_seg == ep_ring->first_seg->next &&
 507                         state->new_deq_ptr < dev->eps[ep_index].stopped_trb)
 508                 state->new_cycle_state ^= 0x1;
 509         xhci_dbg(xhci, "Cycle state = 0x%x\n", state->new_cycle_state);
 510
 511         /* Don't update the ring cycle state for the producer (us). */
 512         xhci_dbg(xhci, "New dequeue segment = %p (virtual)\n",
 513                         state->new_deq_seg);
 514         addr = xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr);
 515         xhci_dbg(xhci, "New dequeue pointer = 0x%llx (DMA)\n",
 516                         (unsigned long long) addr);
 517 }
 518
 519 static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
 520                 struct xhci_td *cur_td)
 521 {
 522         struct xhci_segment *cur_seg;
 523         union xhci_trb *cur_trb;
 524
 525         for (cur_seg = cur_td->start_seg, cur_trb = cur_td->first_trb;
 526                         true;
 527                         next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
 528                 if ((le32_to_cpu(cur_trb->generic.field[3]) & TRB_TYPE_BITMASK)
 529                     == TRB_TYPE(TRB_LINK)) {
 530                         /* Unchain any chained Link TRBs, but
 531                          * leave the pointers intact.
 532                          */
 533                         cur_trb->generic.field[3] &= cpu_to_le32(~TRB_CHAIN);
 534                         xhci_dbg(xhci, "Cancel (unchain) link TRB\n");
 535                         xhci_dbg(xhci, "Address = %p (0x%llx dma); "
 536                                         "in seg %p (0x%llx dma)\n",
 537                                         cur_trb,
 538                                         (unsigned long long)xhci_trb_virt_to_dma(cur_seg, cur_trb),
 539                                         cur_seg,
 540                                         (unsigned long long)cur_seg->dma);
 541                 } else {
 542                         cur_trb->generic.field[0] = 0;
 543                         cur_trb->generic.field[1] = 0;
 544                         cur_trb->generic.field[2] = 0;
 545                         /* Preserve only the cycle bit of this TRB */
 546                         cur_trb->generic.field[3] &= cpu_to_le32(TRB_CYCLE);
 547                         cur_trb->generic.field[3] |= cpu_to_le32(
 548                                 TRB_TYPE(TRB_TR_NOOP));
 549                         xhci_dbg(xhci, "Cancel TRB %p (0x%llx dma) "
 550                                         "in seg %p (0x%llx dma)\n",
 551                                         cur_trb,
 552                                         (unsigned long long)xhci_trb_virt_to_dma(cur_seg, cur_trb),
 553                                         cur_seg,
 554                                         (unsigned long long)cur_seg->dma);
 555                 }
 556                 if (cur_trb == cur_td->last_trb)
 557                         break;
 558         }
 559 }
 560
 561 static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
 562                 unsigned int ep_index, unsigned int stream_id,
 563                 struct xhci_segment *deq_seg,
 564                 union xhci_trb *deq_ptr, u32 cycle_state);
 565
 566 void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
 567                 unsigned int slot_id, unsigned int ep_index,
 568                 unsigned int stream_id,
 569                 struct xhci_dequeue_state *deq_state)
 570 {
 571         struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
 572
 573         xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
 574                         "new deq ptr = %p (0x%llx dma), new cycle = %u\n",
 575                         deq_state->new_deq_seg,
 576                         (unsigned long long)deq_state->new_deq_seg->dma,
 577                         deq_state->new_deq_ptr,
 578                         (unsigned long long)xhci_trb_virt_to_dma(deq_state->new_deq_seg, deq_state->new_deq_ptr),
 579                         deq_state->new_cycle_state);
 580         queue_set_tr_deq(xhci, slot_id, ep_index, stream_id,
 581                         deq_state->new_deq_seg,
 582                         deq_state->new_deq_ptr,
 583                         (u32) deq_state->new_cycle_state);
 584         /* Stop the TD queueing code from ringing the doorbell until
 585          * this command completes.  The HC won't set the dequeue pointer
 586          * if the ring is running, and ringing the doorbell starts the
 587          * ring running.
 588          */
 589         ep->ep_state |= SET_DEQ_PENDING;
 590 }
 591
 592 static void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci,
 593                 struct xhci_virt_ep *ep)
 594 {
 595         ep->ep_state &= ~EP_HALT_PENDING;
 596         /* Can't del_timer_sync in interrupt, so we attempt to cancel.  If the
 597          * timer is running on another CPU, we don't decrement stop_cmds_pending
 598          * (since we didn't successfully stop the watchdog timer).
 599          */
 600         if (del_timer(&ep->stop_cmd_timer))
 601                 ep->stop_cmds_pending--;
 602 }
 603
 604 /* Must be called with xhci->lock held in interrupt context */
 605 static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci,
 606                 struct xhci_td *cur_td, int status, char *adjective)
 607 {
 608         struct usb_hcd *hcd;
 609         struct urb      *urb;
 610         struct urb_priv *urb_priv;
 611
 612         urb = cur_td->urb;
 613         urb_priv = urb->hcpriv;
 614         urb_priv->td_cnt++;
 615         hcd = bus_to_hcd(urb->dev->bus);
 616
 617         /* Only giveback urb when this is the last td in urb */
 618         if (urb_priv->td_cnt == urb_priv->length) {
 619                 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
 620                         xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
 621                         if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
 622                                 if (xhci->quirks & XHCI_AMD_PLL_FIX)
 623                                         usb_amd_quirk_pll_enable();
 624                         }
 625                 }
 626                 usb_hcd_unlink_urb_from_ep(hcd, urb);
 627
 628                 spin_unlock(&xhci->lock);
 629                 usb_hcd_giveback_urb(hcd, urb, status);
 630                 xhci_urb_free_priv(xhci, urb_priv);
 631                 spin_lock(&xhci->lock);
 632         }
 633 }
 634
 635 /*
 636  * When we get a command completion for a Stop Endpoint Command, we need to
 637  * unlink any cancelled TDs from the ring.  There are two ways to do that:
 638  *
 639  *  1. If the HW was in the middle of processing the TD that needs to be
 640  *     cancelled, then we must move the ring's dequeue pointer past the last TRB
 641  *     in the TD with a Set Dequeue Pointer Command.
 642  *  2. Otherwise, we turn all the TRBs in the TD into No-op TRBs (with the chain
 643  *     bit cleared) so that the HW will skip over them.
 644  */
 645 static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 646                 union xhci_trb *trb, struct xhci_event_cmd *event)
 647 {
 648         unsigned int slot_id;
 649         unsigned int ep_index;
 650         struct xhci_virt_device *virt_dev;
 651         struct xhci_ring *ep_ring;
 652         struct xhci_virt_ep *ep;
 653         struct list_head *entry;
 654         struct xhci_td *cur_td = NULL;
 655         struct xhci_td *last_unlinked_td;
 656
 657         struct xhci_dequeue_state deq_state;
 658
 659         if (unlikely(TRB_TO_SUSPEND_PORT(
 660                              le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3])))) {
 661                 slot_id = TRB_TO_SLOT_ID(
 662                         le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3]));
 663                 virt_dev = xhci->devs[slot_id];
 664                 if (virt_dev)
 665                         handle_cmd_in_cmd_wait_list(xhci, virt_dev,
 666                                 event);
 667                 else
 668                         xhci_warn(xhci, "Stop endpoint command "
 669                                 "completion for disabled slot %u\n",
 670                                 slot_id);
 671                 return;
 672         }
 673
 674         memset(&deq_state, 0, sizeof(deq_state));
 675         slot_id = TRB_TO_SLOT_ID(le32_to_cpu(trb->generic.field[3]));
 676         ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
 677         ep = &xhci->devs[slot_id]->eps[ep_index];
 678
 679         if (list_empty(&ep->cancelled_td_list)) {
 680                 xhci_stop_watchdog_timer_in_irq(xhci, ep);
 681                 ep->stopped_td = NULL;
 682                 ep->stopped_trb = NULL;
 683                 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
 684                 return;
 685         }
 686
 687         /* Fix up the ep ring first, so HW stops executing cancelled TDs.
 688          * We have the xHCI lock, so nothing can modify this list until we drop
 689          * it.  We're also in the event handler, so we can't get re-interrupted
 690          * if another Stop Endpoint command completes
 691          */
 692         list_for_each(entry, &ep->cancelled_td_list) {
 693                 cur_td = list_entry(entry, struct xhci_td, cancelled_td_list);
 694                 xhci_dbg(xhci, "Cancelling TD starting at %p, 0x%llx (dma).\n",
 695                                 cur_td->first_trb,
 696                                 (unsigned long long)xhci_trb_virt_to_dma(cur_td->start_seg, cur_td->first_trb));
 697                 ep_ring = xhci_urb_to_transfer_ring(xhci, cur_td->urb);
 698                 if (!ep_ring) {
 699                         /* This shouldn't happen unless a driver is mucking
 700                          * with the stream ID after submission.  This will
 701                          * leave the TD on the hardware ring, and the hardware
 702                          * will try to execute it, and may access a buffer
 703                          * that has already been freed.  In the best case, the
 704                          * hardware will execute it, and the event handler will
 705                          * ignore the completion event for that TD, since it was
 706                          * removed from the td_list for that endpoint.  In
 707                          * short, don't muck with the stream ID after
 708                          * submission.
 709                          */
 710                         xhci_warn(xhci, "WARN Cancelled URB %p "
 711                                         "has invalid stream ID %u.\n",
 712                                         cur_td->urb,
 713                                         cur_td->urb->stream_id);
 714                         goto remove_finished_td;
 715                 }
 716                 /*
 717                  * If we stopped on the TD we need to cancel, then we have to
 718                  * move the xHC endpoint ring dequeue pointer past this TD.
 719                  */
 720                 if (cur_td == ep->stopped_td)
 721                         xhci_find_new_dequeue_state(xhci, slot_id, ep_index,
 722                                         cur_td->urb->stream_id,
 723                                         cur_td, &deq_state);
 724                 else
 725                         td_to_noop(xhci, ep_ring, cur_td);
 726 remove_finished_td:
 727                 /*
 728                  * The event handler won't see a completion for this TD anymore,
 729                  * so remove it from the endpoint ring's TD list.  Keep it in
 730                  * the cancelled TD list for URB completion later.
 731                  */
 732                 list_del(&cur_td->td_list);
 733         }
 734         last_unlinked_td = cur_td;
 735         xhci_stop_watchdog_timer_in_irq(xhci, ep);
 736
 737         /* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
 738         if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
 739                 xhci_queue_new_dequeue_state(xhci,
 740                                 slot_id, ep_index,
 741                                 ep->stopped_td->urb->stream_id,
 742                                 &deq_state);
 743                 xhci_ring_cmd_db(xhci);
 744         } else {
 745                 /* Otherwise ring the doorbell(s) to restart queued transfers */
 746                 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
 747         }
 748         ep->stopped_td = NULL;
 749         ep->stopped_trb = NULL;
 750
 751         /*
 752          * Drop the lock and complete the URBs in the cancelled TD list.
 753          * New TDs to be cancelled might be added to the end of the list before
 754          * we can complete all the URBs for the TDs we already unlinked.
 755          * So stop when we've completed the URB for the last TD we unlinked.
 756          */
 757         do {
 758                 cur_td = list_entry(ep->cancelled_td_list.next,
 759                                 struct xhci_td, cancelled_td_list);
 760                 list_del(&cur_td->cancelled_td_list);
 761
 762                 /* Clean up the cancelled URB */
 763                 /* Doesn't matter what we pass for status, since the core will
 764                  * just overwrite it (because the URB has been unlinked).
 765                  */
 766                 xhci_giveback_urb_in_irq(xhci, cur_td, 0, "cancelled");
 767
 768                 /* Stop processing the cancelled list if the watchdog timer is
 769                  * running.
 770                  */
 771                 if (xhci->xhc_state & XHCI_STATE_DYING)
 772                         return;
 773         } while (cur_td != last_unlinked_td);
 774
 775         /* Return to the event handler with xhci->lock re-acquired */
 776 }
 777
 778 /* Watchdog timer function for when a stop endpoint command fails to complete.
 779  * In this case, we assume the host controller is broken or dying or dead.  The
 780  * host may still be completing some other events, so we have to be careful to
 781  * let the event ring handler and the URB dequeueing/enqueueing functions know
 782  * through xhci->state.
 783  *
 784  * The timer may also fire if the host takes a very long time to respond to the
 785  * command, and the stop endpoint command completion handler cannot delete the
 786  * timer before the timer function is called.  Another endpoint cancellation may
 787  * sneak in before the timer function can grab the lock, and that may queue
 788  * another stop endpoint command and add the timer back.  So we cannot use a
 789  * simple flag to say whether there is a pending stop endpoint command for a
 790  * particular endpoint.
 791  *
 792  * Instead we use a combination of that flag and a counter for the number of
 793  * pending stop endpoint commands.  If the timer is the tail end of the last
 794  * stop endpoint command, and the endpoint's command is still pending, we assume
 795  * the host is dying.
 796  */
 797 void xhci_stop_endpoint_command_watchdog(unsigned long arg)
 798 {
 799         struct xhci_hcd *xhci;
 800         struct xhci_virt_ep *ep;
 801         struct xhci_virt_ep *temp_ep;
 802         struct xhci_ring *ring;
 803         struct xhci_td *cur_td;
 804         int ret, i, j;
 805
 806         ep = (struct xhci_virt_ep *) arg;
 807         xhci = ep->xhci;
 808
 809         spin_lock(&xhci->lock);
 810
 811         ep->stop_cmds_pending--;
 812         if (xhci->xhc_state & XHCI_STATE_DYING) {
 813                 xhci_dbg(xhci, "Stop EP timer ran, but another timer marked "
 814                                 "xHCI as DYING, exiting.\n");
 815                 spin_unlock(&xhci->lock);
 816                 return;
 817         }
 818         if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) {
 819                 xhci_dbg(xhci, "Stop EP timer ran, but no command pending, "
 820                                 "exiting.\n");
 821                 spin_unlock(&xhci->lock);
 822                 return;
 823         }
 824
 825         xhci_warn(xhci, "xHCI host not responding to stop endpoint command.\n");
 826         xhci_warn(xhci, "Assuming host is dying, halting host.\n");
 827         /* Oops, HC is dead or dying or at least not responding to the stop
 828          * endpoint command.
 829          */
 830         xhci->xhc_state |= XHCI_STATE_DYING;
 831         /* Disable interrupts from the host controller and start halting it */
 832         xhci_quiesce(xhci);
 833         spin_unlock(&xhci->lock);
 834
 835         ret = xhci_halt(xhci);
 836
 837         spin_lock(&xhci->lock);
 838         if (ret < 0) {
 839                 /* This is bad; the host is not responding to commands and it's
 840                  * not allowing itself to be halted.  At least interrupts are
 841                  * disabled. If we call usb_hc_died(), it will attempt to
 842                  * disconnect all device drivers under this host.  Those
 843                  * disconnect() methods will wait for all URBs to be unlinked,
 844                  * so we must complete them.
 845                  */
 846                 xhci_warn(xhci, "Non-responsive xHCI host is not halting.\n");
 847                 xhci_warn(xhci, "Completing active URBs anyway.\n");
 848                 /* We could turn all TDs on the rings to no-ops.  This won't
 849                  * help if the host has cached part of the ring, and is slow if
 850                  * we want to preserve the cycle bit.  Skip it and hope the host
 851                  * doesn't touch the memory.
 852                  */
 853         }
 854         for (i = 0; i < MAX_HC_SLOTS; i++) {
 855                 if (!xhci->devs[i])
 856                         continue;
 857                 for (j = 0; j < 31; j++) {
 858                         temp_ep = &xhci->devs[i]->eps[j];
 859                         ring = temp_ep->ring;
 860                         if (!ring)
 861                                 continue;
 862                         xhci_dbg(xhci, "Killing URBs for slot ID %u, "
 863                                         "ep index %u\n", i, j);
 864                         while (!list_empty(&ring->td_list)) {
 865                                 cur_td = list_first_entry(&ring->td_list,
 866                                                 struct xhci_td,
 867                                                 td_list);
 868                                 list_del(&cur_td->td_list);
 869                                 if (!list_empty(&cur_td->cancelled_td_list))
 870                                         list_del(&cur_td->cancelled_td_list);
 871                                 xhci_giveback_urb_in_irq(xhci, cur_td,
 872                                                 -ESHUTDOWN, "killed");
 873                         }
 874                         while (!list_empty(&temp_ep->cancelled_td_list)) {
 875                                 cur_td = list_first_entry(
 876                                                 &temp_ep->cancelled_td_list,
 877                                                 struct xhci_td,
 878                                                 cancelled_td_list);
 879                                 list_del(&cur_td->cancelled_td_list);
 880                                 xhci_giveback_urb_in_irq(xhci, cur_td,
 881                                                 -ESHUTDOWN, "killed");
 882                         }
 883                 }
 884         }
 885         spin_unlock(&xhci->lock);
 886         xhci_dbg(xhci, "Calling usb_hc_died()\n");
 887         usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
 888         xhci_dbg(xhci, "xHCI host controller is dead.\n");
 889 }
 890
 891 /*
 892  * When we get a completion for a Set Transfer Ring Dequeue Pointer command,
 893  * we need to clear the set deq pending flag in the endpoint ring state, so that
 894  * the TD queueing code can ring the doorbell again.  We also need to ring the
 895  * endpoint doorbell to restart the ring, but only if there aren't more
 896  * cancellations pending.
 897  */
 898 static void handle_set_deq_completion(struct xhci_hcd *xhci,
 899                 struct xhci_event_cmd *event,
 900                 union xhci_trb *trb)
 901 {
 902         unsigned int slot_id;
 903         unsigned int ep_index;
 904         unsigned int stream_id;
 905         struct xhci_ring *ep_ring;
 906         struct xhci_virt_device *dev;
 907         struct xhci_ep_ctx *ep_ctx;
 908         struct xhci_slot_ctx *slot_ctx;
 909
 910         slot_id = TRB_TO_SLOT_ID(le32_to_cpu(trb->generic.field[3]));
 911         ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
 912         stream_id = TRB_TO_STREAM_ID(le32_to_cpu(trb->generic.field[2]));
 913         dev = xhci->devs[slot_id];
 914
 915         ep_ring = xhci_stream_id_to_ring(dev, ep_index, stream_id);
 916         if (!ep_ring) {
 917                 xhci_warn(xhci, "WARN Set TR deq ptr command for "
 918                                 "freed stream ID %u\n",
 919                                 stream_id);
 920                 /* XXX: Harmless??? */
 921                 dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
 922                 return;
 923         }
 924
 925         ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
 926         slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx);
 927
 928         if (GET_COMP_CODE(le32_to_cpu(event->status)) != COMP_SUCCESS) {
 929                 unsigned int ep_state;
 930                 unsigned int slot_state;
 931
 932                 switch (GET_COMP_CODE(le32_to_cpu(event->status))) {
 933                 case COMP_TRB_ERR:
 934                         xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because "
 935                                         "of stream ID configuration\n");
 936                         break;
 937                 case COMP_CTX_STATE:
 938                         xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due "
 939                                         "to incorrect slot or ep state.\n");
 940                         ep_state = le32_to_cpu(ep_ctx->ep_info);
 941                         ep_state &= EP_STATE_MASK;
 942                         slot_state = le32_to_cpu(slot_ctx->dev_state);
 943                         slot_state = GET_SLOT_STATE(slot_state);
 944                         xhci_dbg(xhci, "Slot state = %u, EP state = %u\n",
 945                                         slot_state, ep_state);
 946                         break;
 947                 case COMP_EBADSLT:
 948                         xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because "
 949                                         "slot %u was not enabled.\n", slot_id);
 950                         break;
 951                 default:
 952                         xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown "
 953                                         "completion code of %u.\n",
 954                                   GET_COMP_CODE(le32_to_cpu(event->status)));
 955                         break;
 956                 }
 957                 /* OK what do we do now?  The endpoint state is hosed, and we
 958                  * should never get to this point if the synchronization between
 959                  * queueing, and endpoint state are correct.  This might happen
 960                  * if the device gets disconnected after we've finished
 961                  * cancelling URBs, which might not be an error...
 962                  */
 963         } else {
 964                 xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq = @%08llx\n",
 965                          le64_to_cpu(ep_ctx->deq));
 966                 if (xhci_trb_virt_to_dma(dev->eps[ep_index].queued_deq_seg,
 967                                          dev->eps[ep_index].queued_deq_ptr) ==
 968                     (le64_to_cpu(ep_ctx->deq) & ~(EP_CTX_CYCLE_MASK))) {
 969                         /* Update the ring's dequeue segment and dequeue pointer
 970                          * to reflect the new position.
 971                          */
 972                         ep_ring->deq_seg = dev->eps[ep_index].queued_deq_seg;
 973                         ep_ring->dequeue = dev->eps[ep_index].queued_deq_ptr;
 974                 } else {
 975                         xhci_warn(xhci, "Mismatch between completed Set TR Deq "
 976                                         "Ptr command & xHCI internal state.\n");
 977                         xhci_warn(xhci, "ep deq seg = %p, deq ptr = %p\n",
 978                                         dev->eps[ep_index].queued_deq_seg,
 979                                         dev->eps[ep_index].queued_deq_ptr);
 980                 }
 981         }
 982
 983         dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
 984         dev->eps[ep_index].queued_deq_seg = NULL;
 985         dev->eps[ep_index].queued_deq_ptr = NULL;
 986         /* Restart any rings with pending URBs */
 987         ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
 988 }
 989
 990 static void handle_reset_ep_completion(struct xhci_hcd *xhci,
 991                 struct xhci_event_cmd *event,
 992                 union xhci_trb *trb)
 993 {
 994         int slot_id;
 995         unsigned int ep_index;
 996
 997         slot_id = TRB_TO_SLOT_ID(le32_to_cpu(trb->generic.field[3]));
 998         ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
 999         /* This command will only fail if the endpoint wasn't halted,
1000          * but we don't care.
1001          */
1002         xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n",
1003                  (unsigned int) GET_COMP_CODE(le32_to_cpu(event->status)));
1004
1005         /* HW with the reset endpoint quirk needs to have a configure endpoint
1006          * command complete before the endpoint can be used.  Queue that here
1007          * because the HW can't handle two commands being queued in a row.
1008          */
1009         if (xhci->quirks & XHCI_RESET_EP_QUIRK) {
1010                 xhci_dbg(xhci, "Queueing configure endpoint command\n");
1011                 xhci_queue_configure_endpoint(xhci,
1012                                 xhci->devs[slot_id]->in_ctx->dma, slot_id,
1013                                 false);
1014                 xhci_ring_cmd_db(xhci);
1015         } else {
1016                 /* Clear our internal halted state and restart the ring(s) */
1017                 xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED;
1018                 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
1019         }
1020 }
1021
1022 /* Check to see if a command in the device's command queue matches this one.
1023  * Signal the completion or free the command, and return 1.  Return 0 if the
1024  * completed command isn't at the head of the command list.
1025  */
1026 static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
1027                 struct xhci_virt_device *virt_dev,
1028                 struct xhci_event_cmd *event)
1029 {
1030         struct xhci_command *command;
1031
1032         if (list_empty(&virt_dev->cmd_list))
1033                 return 0;
1034
1035         command = list_entry(virt_dev->cmd_list.next,
1036                         struct xhci_command, cmd_list);
1037         if (xhci->cmd_ring->dequeue != command->command_trb)
1038                 return 0;
1039
1040         command->status = GET_COMP_CODE(le32_to_cpu(event->status));
1041         list_del(&command->cmd_list);
1042         if (command->completion)
1043                 complete(command->completion);
1044         else
1045                 xhci_free_command(xhci, command);
1046         return 1;
1047 }
1048
1049 static void handle_cmd_completion(struct xhci_hcd *xhci,
1050                 struct xhci_event_cmd *event)
1051 {
1052         int slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
1053         u64 cmd_dma;
1054         dma_addr_t cmd_dequeue_dma;
1055         struct xhci_input_control_ctx *ctrl_ctx;
1056         struct xhci_virt_device *virt_dev;
1057         unsigned int ep_index;
1058         struct xhci_ring *ep_ring;
1059         unsigned int ep_state;
1060
1061         cmd_dma = le64_to_cpu(event->cmd_trb);
1062         cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
1063                         xhci->cmd_ring->dequeue);
1064         /* Is the command ring deq ptr out of sync with the deq seg ptr? */
1065         if (cmd_dequeue_dma == 0) {
1066                 xhci->error_bitmask |= 1 << 4;
1067                 return;
1068         }
1069         /* Does the DMA address match our internal dequeue pointer address? */
1070         if (cmd_dma != (u64) cmd_dequeue_dma) {
1071                 xhci->error_bitmask |= 1 << 5;
1072                 return;
1073         }
1074         switch (le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3])
1075                 & TRB_TYPE_BITMASK) {
1076         case TRB_TYPE(TRB_ENABLE_SLOT):
1077                 if (GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_SUCCESS)
1078                         xhci->slot_id = slot_id;
1079                 else
1080                         xhci->slot_id = 0;
1081                 complete(&xhci->addr_dev);
1082                 break;
1083         case TRB_TYPE(TRB_DISABLE_SLOT):
1084                 if (xhci->devs[slot_id]) {
1085                         if (xhci->quirks & XHCI_EP_LIMIT_QUIRK)
1086                                 /* Delete default control endpoint resources */
1087                                 xhci_free_device_endpoint_resources(xhci,
1088                                                 xhci->devs[slot_id], true);
1089                         xhci_free_virt_device(xhci, slot_id);
1090                 }
1091                 break;
1092         case TRB_TYPE(TRB_CONFIG_EP):
1093                 virt_dev = xhci->devs[slot_id];
1094                 if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event))
1095                         break;
1096                 /*
1097                  * Configure endpoint commands can come from the USB core
1098                  * configuration or alt setting changes, or because the HW
1099                  * needed an extra configure endpoint command after a reset
1100                  * endpoint command or streams were being configured.
1101                  * If the command was for a halted endpoint, the xHCI driver
1102                  * is not waiting on the configure endpoint command.
1103                  */
1104                 ctrl_ctx = xhci_get_input_control_ctx(xhci,
1105                                 virt_dev->in_ctx);
1106                 /* Input ctx add_flags are the endpoint index plus one */
1107                 ep_index = xhci_last_valid_endpoint(le32_to_cpu(ctrl_ctx->add_flags)) - 1;
1108                 /* A usb_set_interface() call directly after clearing a halted
1109                  * condition may race on this quirky hardware.  Not worth
1110                  * worrying about, since this is prototype hardware.  Not sure
1111                  * if this will work for streams, but streams support was
1112                  * untested on this prototype.
1113                  */
1114                 if (xhci->quirks & XHCI_RESET_EP_QUIRK &&
1115                                 ep_index != (unsigned int) -1 &&
1116                     le32_to_cpu(ctrl_ctx->add_flags) - SLOT_FLAG ==
1117                     le32_to_cpu(ctrl_ctx->drop_flags)) {
1118                         ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
1119                         ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state;
1120                         if (!(ep_state & EP_HALTED))
1121                                 goto bandwidth_change;
1122                         xhci_dbg(xhci, "Completed config ep cmd - "
1123                                         "last ep index = %d, state = %d\n",
1124                                         ep_index, ep_state);
1125                         /* Clear internal halted state and restart ring(s) */
1126                         xhci->devs[slot_id]->eps[ep_index].ep_state &=
1127                                 ~EP_HALTED;
1128                         ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
1129                         break;
1130                 }
1131 bandwidth_change:
1132                 xhci_dbg(xhci, "Completed config ep cmd\n");
1133                 xhci->devs[slot_id]->cmd_status =
1134                         GET_COMP_CODE(le32_to_cpu(event->status));
1135                 complete(&xhci->devs[slot_id]->cmd_completion);
1136                 break;
1137         case TRB_TYPE(TRB_EVAL_CONTEXT):
1138                 virt_dev = xhci->devs[slot_id];
1139                 if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event))
1140                         break;
1141                 xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(le32_to_cpu(event->status));
1142                 complete(&xhci->devs[slot_id]->cmd_completion);
1143                 break;
1144         case TRB_TYPE(TRB_ADDR_DEV):
1145                 xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(le32_to_cpu(event->status));
1146                 complete(&xhci->addr_dev);
1147                 break;
1148         case TRB_TYPE(TRB_STOP_RING):
1149                 handle_stopped_endpoint(xhci, xhci->cmd_ring->dequeue, event);
1150                 break;
1151         case TRB_TYPE(TRB_SET_DEQ):
1152                 handle_set_deq_completion(xhci, event, xhci->cmd_ring->dequeue);
1153                 break;
1154         case TRB_TYPE(TRB_CMD_NOOP):
1155                 break;
1156         case TRB_TYPE(TRB_RESET_EP):
1157                 handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue);
1158                 break;
1159         case TRB_TYPE(TRB_RESET_DEV):
1160                 xhci_dbg(xhci, "Completed reset device command.\n");
1161                 slot_id = TRB_TO_SLOT_ID(
1162                         le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3]));
1163                 virt_dev = xhci->devs[slot_id];
1164                 if (virt_dev)
1165                         handle_cmd_in_cmd_wait_list(xhci, virt_dev, event);
1166                 else
1167                         xhci_warn(xhci, "Reset device command completion "
1168                                         "for disabled slot %u\n", slot_id);
1169                 break;
1170         case TRB_TYPE(TRB_NEC_GET_FW):
1171                 if (!(xhci->quirks & XHCI_NEC_HOST)) {
1172                         xhci->error_bitmask |= 1 << 6;
1173                         break;
1174                 }
1175                 xhci_dbg(xhci, "NEC firmware version %2x.%02x\n",
1176                          NEC_FW_MAJOR(le32_to_cpu(event->status)),
1177                          NEC_FW_MINOR(le32_to_cpu(event->status)));
1178                 break;
1179         default:
1180                 /* Skip over unknown commands on the event ring */
1181                 xhci->error_bitmask |= 1 << 6;
1182                 break;
1183         }
1184         inc_deq(xhci, xhci->cmd_ring, false);
1185 }
1186
1187 static void handle_vendor_event(struct xhci_hcd *xhci,
1188                 union xhci_trb *event)
1189 {
1190         u32 trb_type;
1191
1192         trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(event->generic.field[3]));
1193         xhci_dbg(xhci, "Vendor specific event TRB type = %u\n", trb_type);
1194         if (trb_type == TRB_NEC_CMD_COMP && (xhci->quirks & XHCI_NEC_HOST))
1195                 handle_cmd_completion(xhci, &event->event_cmd);
1196 }
1197
1198 /* @port_id: the one-based port ID from the hardware (indexed from array of all
1199  * port registers -- USB 3.0 and USB 2.0).
1200  *
1201  * Returns a zero-based port number, which is suitable for indexing into each of
1202  * the split roothubs' port arrays and bus state arrays.
1203  */
1204 static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
1205                 struct xhci_hcd *xhci, u32 port_id)
1206 {
1207         unsigned int i;
1208         unsigned int num_similar_speed_ports = 0;
1209
1210         /* port_id from the hardware is 1-based, but port_array[], usb3_ports[],
1211          * and usb2_ports are 0-based indexes.  Count the number of similar
1212          * speed ports, up to 1 port before this port.
1213          */
1214         for (i = 0; i < (port_id - 1); i++) {
1215                 u8 port_speed = xhci->port_array[i];
1216
1217                 /*
1218                  * Skip ports that don't have known speeds, or have duplicate
1219                  * Extended Capabilities port speed entries.
1220                  */
1221                 if (port_speed == 0 || port_speed == DUPLICATE_ENTRY)
1222                         continue;
1223
1224                 /*
1225                  * USB 3.0 ports are always under a USB 3.0 hub.  USB 2.0 and
1226                  * 1.1 ports are under the USB 2.0 hub.  If the port speed
1227                  * matches the device speed, it's a similar speed port.
1228                  */
1229                 if ((port_speed == 0x03) == (hcd->speed == HCD_USB3))
1230                         num_similar_speed_ports++;
1231         }
1232         return num_similar_speed_ports;
1233 }
1234
1235 static void handle_port_status(struct xhci_hcd *xhci,
1236                 union xhci_trb *event)
1237 {
1238         struct usb_hcd *hcd;
1239         u32 port_id;
1240         u32 temp, temp1;
1241         int max_ports;
1242         int slot_id;
1243         unsigned int faked_port_index;
1244         u8 major_revision;
1245         struct xhci_bus_state *bus_state;
1246         __le32 __iomem **port_array;
1247         bool bogus_port_status = false;
1248
1249         /* Port status change events always have a successful completion code */
1250         if (GET_COMP_CODE(le32_to_cpu(event->generic.field[2])) != COMP_SUCCESS) {
1251                 xhci_warn(xhci, "WARN: xHC returned failed port status event\n");
1252                 xhci->error_bitmask |= 1 << 8;
1253         }
1254         port_id = GET_PORT_ID(le32_to_cpu(event->generic.field[0]));
1255         xhci_dbg(xhci, "Port Status Change Event for port %d\n", port_id);
1256
1257         max_ports = HCS_MAX_PORTS(xhci->hcs_params1);
1258         if ((port_id <= 0) || (port_id > max_ports)) {
1259                 xhci_warn(xhci, "Invalid port id %d\n", port_id);
1260                 bogus_port_status = true;
1261                 goto cleanup;
1262         }
1263
1264         /* Figure out which usb_hcd this port is attached to:
1265          * is it a USB 3.0 port or a USB 2.0/1.1 port?
1266          */
1267         major_revision = xhci->port_array[port_id - 1];
1268         if (major_revision == 0) {
1269                 xhci_warn(xhci, "Event for port %u not in "
1270                                 "Extended Capabilities, ignoring.\n",
1271                                 port_id);
1272                 bogus_port_status = true;
1273                 goto cleanup;
1274         }
1275         if (major_revision == DUPLICATE_ENTRY) {
1276                 xhci_warn(xhci, "Event for port %u duplicated in"
1277                                 "Extended Capabilities, ignoring.\n",
1278                                 port_id);
1279                 bogus_port_status = true;
1280                 goto cleanup;
1281         }
1282
1283         /*
1284          * Hardware port IDs reported by a Port Status Change Event include USB
1285          * 3.0 and USB 2.0 ports.  We want to check if the port has reported a
1286          * resume event, but we first need to translate the hardware port ID
1287          * into the index into the ports on the correct split roothub, and the
1288          * correct bus_state structure.
1289          */
1290         /* Find the right roothub. */
1291         hcd = xhci_to_hcd(xhci);
1292         if ((major_revision == 0x03) != (hcd->speed == HCD_USB3))
1293                 hcd = xhci->shared_hcd;
1294         bus_state = &xhci->bus_state[hcd_index(hcd)];
1295         if (hcd->speed == HCD_USB3)
1296                 port_array = xhci->usb3_ports;
1297         else
1298                 port_array = xhci->usb2_ports;
1299         /* Find the faked port hub number */
1300         faked_port_index = find_faked_portnum_from_hw_portnum(hcd, xhci,
1301                         port_id);
1302
1303         temp = xhci_readl(xhci, port_array[faked_port_index]);
1304         if (hcd->state == HC_STATE_SUSPENDED) {
1305                 xhci_dbg(xhci, "resume root hub\n");
1306                 usb_hcd_resume_root_hub(hcd);
1307         }
1308
1309         if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_RESUME) {
1310                 xhci_dbg(xhci, "port resume event for port %d\n", port_id);
1311
1312                 temp1 = xhci_readl(xhci, &xhci->op_regs->command);
1313                 if (!(temp1 & CMD_RUN)) {
1314                         xhci_warn(xhci, "xHC is not running.\n");
1315                         goto cleanup;
1316                 }
1317
1318                 if (DEV_SUPERSPEED(temp)) {
1319                         xhci_dbg(xhci, "resume SS port %d\n", port_id);
1320                         temp = xhci_port_state_to_neutral(temp);
1321                         temp &= ~PORT_PLS_MASK;
1322                         temp |= PORT_LINK_STROBE | XDEV_U0;
1323                         xhci_writel(xhci, temp, port_array[faked_port_index]);
1324                         slot_id = xhci_find_slot_id_by_port(hcd, xhci,
1325                                         faked_port_index);
1326                         if (!slot_id) {
1327                                 xhci_dbg(xhci, "slot_id is zero\n");
1328                                 goto cleanup;
1329                         }
1330                         xhci_ring_device(xhci, slot_id);
1331                         xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
1332                         /* Clear PORT_PLC */
1333                         temp = xhci_readl(xhci, port_array[faked_port_index]);
1334                         temp = xhci_port_state_to_neutral(temp);
1335                         temp |= PORT_PLC;
1336                         xhci_writel(xhci, temp, port_array[faked_port_index]);
1337                 } else {
1338                         xhci_dbg(xhci, "resume HS port %d\n", port_id);
1339                         bus_state->resume_done[faked_port_index] = jiffies +
1340                                 msecs_to_jiffies(20);
1341                         mod_timer(&hcd->rh_timer,
1342                                   bus_state->resume_done[faked_port_index]);
1343                         /* Do the rest in GetPortStatus */
1344                 }
1345         }
1346
1347 cleanup:
1348         /* Update event ring dequeue pointer before dropping the lock */
1349         inc_deq(xhci, xhci->event_ring, true);
1350
1351         /* Don't make the USB core poll the roothub if we got a bad port status
1352          * change event.  Besides, at that point we can't tell which roothub
1353          * (USB 2.0 or USB 3.0) to kick.
1354          */
1355         if (bogus_port_status)
1356                 return;
1357
1358         spin_unlock(&xhci->lock);
1359         /* Pass this up to the core */
1360         usb_hcd_poll_rh_status(hcd);
1361         spin_lock(&xhci->lock);
1362 }
1363
1364 /*
1365  * This TD is defined by the TRBs starting at start_trb in start_seg and ending
1366  * at end_trb, which may be in another segment.  If the suspect DMA address is a
1367  * TRB in this TD, this function returns that TRB's segment.  Otherwise it
1368  * returns 0.
1369  */
1370 struct xhci_segment *trb_in_td(struct xhci_segment *start_seg,
1371                 union xhci_trb  *start_trb,
1372                 union xhci_trb  *end_trb,
1373                 dma_addr_t      suspect_dma)
1374 {
1375         dma_addr_t start_dma;
1376         dma_addr_t end_seg_dma;
1377         dma_addr_t end_trb_dma;
1378         struct xhci_segment *cur_seg;
1379
1380         start_dma = xhci_trb_virt_to_dma(start_seg, start_trb);
1381         cur_seg = start_seg;
1382
1383         do {
1384                 if (start_dma == 0)
1385                         return NULL;
1386                 /* We may get an event for a Link TRB in the middle of a TD */
1387                 end_seg_dma = xhci_trb_virt_to_dma(cur_seg,
1388                                 &cur_seg->trbs[TRBS_PER_SEGMENT - 1]);
1389                 /* If the end TRB isn't in this segment, this is set to 0 */
1390                 end_trb_dma = xhci_trb_virt_to_dma(cur_seg, end_trb);
1391
1392                 if (end_trb_dma > 0) {
1393                         /* The end TRB is in this segment, so suspect should be here */
1394                         if (start_dma <= end_trb_dma) {
1395                                 if (suspect_dma >= start_dma && suspect_dma <= end_trb_dma)
1396                                         return cur_seg;
1397                         } else {
1398                                 /* Case for one segment with
1399                                  * a TD wrapped around to the top
1400                                  */
1401                                 if ((suspect_dma >= start_dma &&
1402                                                         suspect_dma <= end_seg_dma) ||
1403                                                 (suspect_dma >= cur_seg->dma &&
1404                                                  suspect_dma <= end_trb_dma))
1405                                         return cur_seg;
1406                         }
1407                         return NULL;
1408                 } else {
1409                         /* Might still be somewhere in this segment */
1410                         if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma)
1411                                 return cur_seg;
1412                 }
1413                 cur_seg = cur_seg->next;
1414                 start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]);
1415         } while (cur_seg != start_seg);
1416
1417         return NULL;
1418 }
1419
1420 static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
1421                 unsigned int slot_id, unsigned int ep_index,
1422                 unsigned int stream_id,
1423                 struct xhci_td *td, union xhci_trb *event_trb)
1424 {
1425         struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
1426         ep->ep_state |= EP_HALTED;
1427         ep->stopped_td = td;
1428         ep->stopped_trb = event_trb;
1429         ep->stopped_stream = stream_id;
1430
1431         xhci_queue_reset_ep(xhci, slot_id, ep_index);
1432         xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index);
1433
1434         ep->stopped_td = NULL;
1435         ep->stopped_trb = NULL;
1436         ep->stopped_stream = 0;
1437
1438         xhci_ring_cmd_db(xhci);
1439 }
1440
1441 /* Check if an error has halted the endpoint ring.  The class driver will
1442  * cleanup the halt for a non-default control endpoint if we indicate a stall.
1443  * However, a babble and other errors also halt the endpoint ring, and the class
1444  * driver won't clear the halt in that case, so we need to issue a Set Transfer
1445  * Ring Dequeue Pointer command manually.
1446  */
1447 static int xhci_requires_manual_halt_cleanup(struct xhci_hcd *xhci,
1448                 struct xhci_ep_ctx *ep_ctx,
1449                 unsigned int trb_comp_code)
1450 {
1451         /* TRB completion codes that may require a manual halt cleanup */
1452         if (trb_comp_code == COMP_TX_ERR ||
1453                         trb_comp_code == COMP_BABBLE ||
1454                         trb_comp_code == COMP_SPLIT_ERR)
1455                 /* The 0.96 spec says a babbling control endpoint
1456                  * is not halted. The 0.96 spec says it is.  Some HW
1457                  * claims to be 0.95 compliant, but it halts the control
1458                  * endpoint anyway.  Check if a babble halted the
1459                  * endpoint.
1460                  */
1461                 if ((le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) == EP_STATE_HALTED)
1462                         return 1;
1463
1464         return 0;
1465 }
1466
1467 int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code)
1468 {
1469         if (trb_comp_code >= 224 && trb_comp_code <= 255) {
1470                 /* Vendor defined "informational" completion code,
1471                  * treat as not-an-error.
1472                  */
1473                 xhci_dbg(xhci, "Vendor defined info completion code %u\n",
1474                                 trb_comp_code);
1475                 xhci_dbg(xhci, "Treating code as success.\n");
1476                 return 1;
1477         }
1478         return 0;
1479 }
1480
1481 /*
1482  * Finish the td processing, remove the td from td list;
1483  * Return 1 if the urb can be given back.
1484  */
1485 static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
1486         union xhci_trb *event_trb, struct xhci_transfer_event *event,
1487         struct xhci_virt_ep *ep, int *status, bool skip)
1488 {
1489         struct xhci_virt_device *xdev;
1490         struct xhci_ring *ep_ring;
1491         unsigned int slot_id;
1492         int ep_index;
1493         struct urb *urb = NULL;
1494         struct xhci_ep_ctx *ep_ctx;
1495         int ret = 0;
1496         struct urb_priv *urb_priv;
1497         u32 trb_comp_code;
1498
1499         slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
1500         xdev = xhci->devs[slot_id];
1501         ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
1502         ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
1503         ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
1504         trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
1505
1506         if (skip)
1507                 goto td_cleanup;
1508
1509         if (trb_comp_code == COMP_STOP_INVAL ||
1510                         trb_comp_code == COMP_STOP) {
1511                 /* The Endpoint Stop Command completion will take care of any
1512                  * stopped TDs.  A stopped TD may be restarted, so don't update
1513                  * the ring dequeue pointer or take this TD off any lists yet.
1514                  */
1515                 ep->stopped_td = td;
1516                 ep->stopped_trb = event_trb;
1517                 return 0;
1518         } else {
1519                 if (trb_comp_code == COMP_STALL) {
1520                         /* The transfer is completed from the driver's
1521                          * perspective, but we need to issue a set dequeue
1522                          * command for this stalled endpoint to move the dequeue
1523                          * pointer past the TD.  We can't do that here because
1524                          * the halt condition must be cleared first.  Let the
1525                          * USB class driver clear the stall later.
1526                          */
1527                         ep->stopped_td = td;
1528                         ep->stopped_trb = event_trb;
1529                         ep->stopped_stream = ep_ring->stream_id;
1530                 } else if (xhci_requires_manual_halt_cleanup(xhci,
1531                                         ep_ctx, trb_comp_code)) {
1532                         /* Other types of errors halt the endpoint, but the
1533                          * class driver doesn't call usb_reset_endpoint() unless
1534                          * the error is -EPIPE.  Clear the halted status in the
1535                          * xHCI hardware manually.
1536                          */
1537                         xhci_cleanup_halted_endpoint(xhci,
1538                                         slot_id, ep_index, ep_ring->stream_id,
1539                                         td, event_trb);
1540                 } else {
1541                         /* Update ring dequeue pointer */
1542                         while (ep_ring->dequeue != td->last_trb)
1543                                 inc_deq(xhci, ep_ring, false);
1544                         inc_deq(xhci, ep_ring, false);
1545                 }
1546
1547 td_cleanup:
1548                 /* Clean up the endpoint's TD list */
1549                 urb = td->urb;
1550                 urb_priv = urb->hcpriv;
1551
1552                 /* Do one last check of the actual transfer length.
1553                  * If the host controller said we transferred more data than
1554                  * the buffer length, urb->actual_length will be a very big
1555                  * number (since it's unsigned).  Play it safe and say we didn't
1556                  * transfer anything.
1557                  */
1558                 if (urb->actual_length > urb->transfer_buffer_length) {
1559                         xhci_warn(xhci, "URB transfer length is wrong, "
1560                                         "xHC issue? req. len = %u, "
1561                                         "act. len = %u\n",
1562                                         urb->transfer_buffer_length,
1563                                         urb->actual_length);
1564                         urb->actual_length = 0;
1565                         if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
1566                                 *status = -EREMOTEIO;
1567                         else
1568                                 *status = 0;
1569                 }
1570                 list_del(&td->td_list);
1571                 /* Was this TD slated to be cancelled but completed anyway? */
1572                 if (!list_empty(&td->cancelled_td_list))
1573                         list_del(&td->cancelled_td_list);
1574
1575                 urb_priv->td_cnt++;
1576                 /* Giveback the urb when all the tds are completed */
1577                 if (urb_priv->td_cnt == urb_priv->length) {
1578                         ret = 1;
1579                         if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
1580                                 xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
1581                                 if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs
1582                                         == 0) {
1583                                         if (xhci->quirks & XHCI_AMD_PLL_FIX)
1584                                                 usb_amd_quirk_pll_enable();
1585                                 }
1586                         }
1587                 }
1588         }
1589
1590         return ret;
1591 }
1592
1593 /*
1594  * Process control tds, update urb status and actual_length.
1595  */
1596 static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
1597         union xhci_trb *event_trb, struct xhci_transfer_event *event,
1598         struct xhci_virt_ep *ep, int *status)
1599 {
1600         struct xhci_virt_device *xdev;
1601         struct xhci_ring *ep_ring;
1602         unsigned int slot_id;
1603         int ep_index;
1604         struct xhci_ep_ctx *ep_ctx;
1605         u32 trb_comp_code;
1606
1607         slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
1608         xdev = xhci->devs[slot_id];
1609         ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
1610         ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
1611         ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
1612         trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
1613
1614         xhci_debug_trb(xhci, xhci->event_ring->dequeue);
1615         switch (trb_comp_code) {
1616         case COMP_SUCCESS:
1617                 if (event_trb == ep_ring->dequeue) {
1618                         xhci_warn(xhci, "WARN: Success on ctrl setup TRB "
1619                                         "without IOC set??\n");
1620                         *status = -ESHUTDOWN;
1621                 } else if (event_trb != td->last_trb) {
1622                         xhci_warn(xhci, "WARN: Success on ctrl data TRB "
1623                                         "without IOC set??\n");
1624                         *status = -ESHUTDOWN;
1625                 } else {
1626                         *status = 0;
1627                 }
1628                 break;
1629         case COMP_SHORT_TX:
1630                 xhci_warn(xhci, "WARN: short transfer on control ep\n");
1631                 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
1632                         *status = -EREMOTEIO;
1633                 else
1634                         *status = 0;
1635                 break;
1636         case COMP_STOP_INVAL:
1637         case COMP_STOP:
1638                 return finish_td(xhci, td, event_trb, event, ep, status, false);
1639         default:
1640                 if (!xhci_requires_manual_halt_cleanup(xhci,
1641                                         ep_ctx, trb_comp_code))
1642                         break;
1643                 xhci_dbg(xhci, "TRB error code %u, "
1644                                 "halted endpoint index = %u\n",
1645                                 trb_comp_code, ep_index);
1646                 /* else fall through */
1647         case COMP_STALL:
1648                 /* Did we transfer part of the data (middle) phase? */
1649                 if (event_trb != ep_ring->dequeue &&
1650                                 event_trb != td->last_trb)
1651                         td->urb->actual_length =
1652                                 td->urb->transfer_buffer_length
1653                                 - TRB_LEN(le32_to_cpu(event->transfer_len));
1654                 else
1655                         td->urb->actual_length = 0;
1656
1657                 xhci_cleanup_halted_endpoint(xhci,
1658                         slot_id, ep_index, 0, td, event_trb);
1659                 return finish_td(xhci, td, event_trb, event, ep, status, true);
1660         }
1661         /*
1662          * Did we transfer any data, despite the errors that might have
1663          * happened?  I.e. did we get past the setup stage?
1664          */
1665         if (event_trb != ep_ring->dequeue) {
1666                 /* The event was for the status stage */
1667                 if (event_trb == td->last_trb) {
1668                         if (td->urb->actual_length != 0) {
1669                                 /* Don't overwrite a previously set error code
1670                                  */
1671                                 if ((*status == -EINPROGRESS || *status == 0) &&
1672                                                 (td->urb->transfer_flags
1673                                                  & URB_SHORT_NOT_OK))
1674                                         /* Did we already see a short data
1675                                          * stage? */
1676                                         *status = -EREMOTEIO;
1677                         } else {
1678                                 td->urb->actual_length =
1679                                         td->urb->transfer_buffer_length;
1680                         }
1681                 } else {
1682                 /* Maybe the event was for the data stage? */
1683                         td->urb->actual_length =
1684                                 td->urb->transfer_buffer_length -
1685                                 TRB_LEN(le32_to_cpu(event->transfer_len));
1686                         xhci_dbg(xhci, "Waiting for status "
1687                                         "stage event\n");
1688                         return 0;
1689                 }
1690         }
1691
1692         return finish_td(xhci, td, event_trb, event, ep, status, false);
1693 }
1694
1695 /*
1696  * Process isochronous tds, update urb packet status and actual_length.
1697  */
1698 static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
1699         union xhci_trb *event_trb, struct xhci_transfer_event *event,
1700         struct xhci_virt_ep *ep, int *status)
1701 {
1702         struct xhci_ring *ep_ring;
1703         struct urb_priv *urb_priv;
1704         int idx;
1705         int len = 0;
1706         union xhci_trb *cur_trb;
1707         struct xhci_segment *cur_seg;
1708         struct usb_iso_packet_descriptor *frame;
1709         u32 trb_comp_code;
1710         bool skip_td = false;
1711
1712         ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
1713         trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
1714         urb_priv = td->urb->hcpriv;
1715         idx = urb_priv->td_cnt;
1716         frame = &td->urb->iso_frame_desc[idx];
1717
1718         /* handle completion code */
1719         switch (trb_comp_code) {
1720         case COMP_SUCCESS:
1721                 frame->status = 0;
1722                 break;
1723         case COMP_SHORT_TX:
1724                 frame->status = td->urb->transfer_flags & URB_SHORT_NOT_OK ?
1725                                 -EREMOTEIO : 0;
1726                 break;
1727         case COMP_BW_OVER:
1728                 frame->status = -ECOMM;
1729                 skip_td = true;
1730                 break;
1731         case COMP_BUFF_OVER:
1732         case COMP_BABBLE:
1733                 frame->status = -EOVERFLOW;
1734                 skip_td = true;
1735                 break;
1736         case COMP_DEV_ERR:
1737         case COMP_STALL:
1738                 frame->status = -EPROTO;
1739                 skip_td = true;
1740                 break;
1741         case COMP_STOP:
1742         case COMP_STOP_INVAL:
1743                 break;
1744         default:
1745                 frame->status = -1;
1746                 break;
1747         }
1748
1749         if (trb_comp_code == COMP_SUCCESS || skip_td) {
1750                 frame->actual_length = frame->length;
1751                 td->urb->actual_length += frame->length;
1752         } else {
1753                 for (cur_trb = ep_ring->dequeue,
1754                      cur_seg = ep_ring->deq_seg; cur_trb != event_trb;
1755                      next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
1756                         if ((le32_to_cpu(cur_trb->generic.field[3]) &
1757                          TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) &&
1758                             (le32_to_cpu(cur_trb->generic.field[3]) &
1759                          TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK))
1760                                 len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2]));
1761                 }
1762                 len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
1763                         TRB_LEN(le32_to_cpu(event->transfer_len));
1764
1765                 if (trb_comp_code != COMP_STOP_INVAL) {
1766                         frame->actual_length = len;
1767                         td->urb->actual_length += len;
1768                 }
1769         }
1770
1771         return finish_td(xhci, td, event_trb, event, ep, status, false);
1772 }
1773
1774 static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
1775                         struct xhci_transfer_event *event,
1776                         struct xhci_virt_ep *ep, int *status)
1777 {
1778         struct xhci_ring *ep_ring;
1779         struct urb_priv *urb_priv;
1780         struct usb_iso_packet_descriptor *frame;
1781         int idx;
1782
1783         ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
1784         urb_priv = td->urb->hcpriv;
1785         idx = urb_priv->td_cnt;
1786         frame = &td->urb->iso_frame_desc[idx];
1787
1788         /* The transfer is partly done. */
1789         frame->status = -EXDEV;
1790
1791         /* calc actual length */
1792         frame->actual_length = 0;
1793
1794         /* Update ring dequeue pointer */
1795         while (ep_ring->dequeue != td->last_trb)
1796                 inc_deq(xhci, ep_ring, false);
1797         inc_deq(xhci, ep_ring, false);
1798
1799         return finish_td(xhci, td, NULL, event, ep, status, true);
1800 }
1801
1802 /*
1803  * Process bulk and interrupt tds, update urb status and actual_length.
1804  */
1805 static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
1806         union xhci_trb *event_trb, struct xhci_transfer_event *event,
1807         struct xhci_virt_ep *ep, int *status)
1808 {
1809         struct xhci_ring *ep_ring;
1810         union xhci_trb *cur_trb;
1811         struct xhci_segment *cur_seg;
1812         u32 trb_comp_code;
1813
1814         ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
1815         trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
1816
1817         switch (trb_comp_code) {
1818         case COMP_SUCCESS:
1819                 /* Double check that the HW transferred everything. */
1820                 if (event_trb != td->last_trb) {
1821                         xhci_warn(xhci, "WARN Successful completion "
1822                                         "on short TX\n");
1823                         if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
1824                                 *status = -EREMOTEIO;
1825                         else
1826                                 *status = 0;
1827                 } else {
1828                         *status = 0;
1829                 }
1830                 break;
1831         case COMP_SHORT_TX:
1832                 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
1833                         *status = -EREMOTEIO;
1834                 else
1835                         *status = 0;
1836                 break;
1837         default:
1838                 /* Others already handled above */
1839                 break;
1840         }
1841         if (trb_comp_code == COMP_SHORT_TX)
1842                 xhci_dbg(xhci, "ep %#x - asked for %d bytes, "
1843                                 "%d bytes untransferred\n",
1844                                 td->urb->ep->desc.bEndpointAddress,
1845                                 td->urb->transfer_buffer_length,
1846                                 TRB_LEN(le32_to_cpu(event->transfer_len)));
1847         /* Fast path - was this the last TRB in the TD for this URB? */
1848         if (event_trb == td->last_trb) {
1849                 if (TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
1850                         td->urb->actual_length =
1851                                 td->urb->transfer_buffer_length -
1852                                 TRB_LEN(le32_to_cpu(event->transfer_len));
1853                         if (td->urb->transfer_buffer_length <
1854                                         td->urb->actual_length) {
1855                                 xhci_warn(xhci, "HC gave bad length "
1856                                                 "of %d bytes left\n",
1857                                           TRB_LEN(le32_to_cpu(event->transfer_len)));
1858                                 td->urb->actual_length = 0;
1859                                 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
1860                                         *status = -EREMOTEIO;
1861                                 else
1862                                         *status = 0;
1863                         }
1864                         /* Don't overwrite a previously set error code */
1865                         if (*status == -EINPROGRESS) {
1866                                 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
1867                                         *status = -EREMOTEIO;
1868                                 else
1869                                         *status = 0;
1870                         }
1871                 } else {
1872                         td->urb->actual_length =
1873                                 td->urb->transfer_buffer_length;
1874                         /* Ignore a short packet completion if the
1875                          * untransferred length was zero.
1876                          */
1877                         if (*status == -EREMOTEIO)
1878                                 *status = 0;
1879                 }
1880         } else {
1881                 /* Slow path - walk the list, starting from the dequeue
1882                  * pointer, to get the actual length transferred.
1883                  */
1884                 td->urb->actual_length = 0;
1885                 for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg;
1886                                 cur_trb != event_trb;
1887                                 next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
1888                         if ((le32_to_cpu(cur_trb->generic.field[3]) &
1889                          TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) &&
1890                             (le32_to_cpu(cur_trb->generic.field[3]) &
1891                          TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK))
1892                                 td->urb->actual_length +=
1893                                         TRB_LEN(le32_to_cpu(cur_trb->generic.field[2]));
1894                 }
1895                 /* If the ring didn't stop on a Link or No-op TRB, add
1896                  * in the actual bytes transferred from the Normal TRB
1897                  */
1898                 if (trb_comp_code != COMP_STOP_INVAL)
1899                         td->urb->actual_length +=
1900                                 TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
1901                                 TRB_LEN(le32_to_cpu(event->transfer_len));
1902         }
1903
1904         return finish_td(xhci, td, event_trb, event, ep, status, false);
1905 }
1906
1907 /*
1908  * If this function returns an error condition, it means it got a Transfer
1909  * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
1910  * At this point, the host controller is probably hosed and should be reset.
1911  */
1912 static int handle_tx_event(struct xhci_hcd *xhci,
1913                 struct xhci_transfer_event *event)
1914 {
1915         struct xhci_virt_device *xdev;
1916         struct xhci_virt_ep *ep;
1917         struct xhci_ring *ep_ring;
1918         unsigned int slot_id;
1919         int ep_index;
1920         struct xhci_td *td = NULL;
1921         dma_addr_t event_dma;
1922         struct xhci_segment *event_seg;
1923         union xhci_trb *event_trb;
1924         struct urb *urb = NULL;
1925         int status = -EINPROGRESS;
1926         struct urb_priv *urb_priv;
1927         struct xhci_ep_ctx *ep_ctx;
1928         u32 trb_comp_code;
1929         int ret = 0;
1930
1931         slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
1932         xdev = xhci->devs[slot_id];
1933         if (!xdev) {
1934                 xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n");
1935                 return -ENODEV;
1936         }
1937
1938         /* Endpoint ID is 1 based, our index is zero based */
1939         ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
1940         ep = &xdev->eps[ep_index];
1941         ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
1942         ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
1943         if (!ep_ring ||
1944             (le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) ==
1945             EP_STATE_DISABLED) {
1946                 xhci_err(xhci, "ERROR Transfer event for disabled endpoint "
1947                                 "or incorrect stream ring\n");
1948                 return -ENODEV;
1949         }
1950
1951         event_dma = le64_to_cpu(event->buffer);
1952         trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
1953         /* Look for common error cases */
1954         switch (trb_comp_code) {
1955         /* Skip codes that require special handling depending on
1956          * transfer type
1957          */
1958         case COMP_SUCCESS:
1959         case COMP_SHORT_TX:
1960                 break;
1961         case COMP_STOP:
1962                 xhci_dbg(xhci, "Stopped on Transfer TRB\n");
1963                 break;
1964         case COMP_STOP_INVAL:
1965                 xhci_dbg(xhci, "Stopped on No-op or Link TRB\n");
1966                 break;
1967         case COMP_STALL:
1968                 xhci_warn(xhci, "WARN: Stalled endpoint\n");
1969                 ep->ep_state |= EP_HALTED;
1970                 status = -EPIPE;
1971                 break;
1972         case COMP_TRB_ERR:
1973                 xhci_warn(xhci, "WARN: TRB error on endpoint\n");
1974                 status = -EILSEQ;
1975                 break;
1976         case COMP_SPLIT_ERR:
1977         case COMP_TX_ERR:
1978                 xhci_warn(xhci, "WARN: transfer error on endpoint\n");
1979                 status = -EPROTO;
1980                 break;
1981         case COMP_BABBLE:
1982                 xhci_warn(xhci, "WARN: babble error on endpoint\n");
1983                 status = -EOVERFLOW;
1984                 break;
1985         case COMP_DB_ERR:
1986                 xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n");
1987                 status = -ENOSR;
1988                 break;
1989         case COMP_BW_OVER:
1990                 xhci_warn(xhci, "WARN: bandwidth overrun event on endpoint\n");
1991                 break;
1992         case COMP_BUFF_OVER:
1993                 xhci_warn(xhci, "WARN: buffer overrun event on endpoint\n");
1994                 break;
1995         case COMP_UNDERRUN:
1996                 /*
1997                  * When the Isoch ring is empty, the xHC will generate
1998                  * a Ring Overrun Event for IN Isoch endpoint or Ring
1999                  * Underrun Event for OUT Isoch endpoint.
2000                  */
2001                 xhci_dbg(xhci, "underrun event on endpoint\n");
2002                 if (!list_empty(&ep_ring->td_list))
2003                         xhci_dbg(xhci, "Underrun Event for slot %d ep %d "
2004                                         "still with TDs queued?\n",
2005                                  TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
2006                                  ep_index);
2007                 goto cleanup;
2008         case COMP_OVERRUN:
2009                 xhci_dbg(xhci, "overrun event on endpoint\n");
2010                 if (!list_empty(&ep_ring->td_list))
2011                         xhci_dbg(xhci, "Overrun Event for slot %d ep %d "
2012                                         "still with TDs queued?\n",
2013                                  TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
2014                                  ep_index);
2015                 goto cleanup;
2016         case COMP_DEV_ERR:
2017                 xhci_warn(xhci, "WARN: detect an incompatible device");
2018                 status = -EPROTO;
2019                 break;
2020         case COMP_MISSED_INT:
2021                 /*
2022                  * When encounter missed service error, one or more isoc tds
2023                  * may be missed by xHC.
2024                  * Set skip flag of the ep_ring; Complete the missed tds as
2025                  * short transfer when process the ep_ring next time.
2026                  */
2027                 ep->skip = true;
2028                 xhci_dbg(xhci, "Miss service interval error, set skip flag\n");
2029                 goto cleanup;
2030         default:
2031                 if (xhci_is_vendor_info_code(xhci, trb_comp_code)) {
2032                         status = 0;
2033                         break;
2034                 }
2035                 xhci_warn(xhci, "ERROR Unknown event condition, HC probably "
2036                                 "busted\n");
2037                 goto cleanup;
2038         }
2039
2040         do {
2041                 /* This TRB should be in the TD at the head of this ring's
2042                  * TD list.
2043                  */
2044                 if (list_empty(&ep_ring->td_list)) {
2045                         xhci_warn(xhci, "WARN Event TRB for slot %d ep %d "
2046                                         "with no TDs queued?\n",
2047                                   TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
2048                                   ep_index);
2049                         xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
2050                                  (unsigned int) (le32_to_cpu(event->flags)
2051                                                  & TRB_TYPE_BITMASK)>>10);
2052                         xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
2053                         if (ep->skip) {
2054                                 ep->skip = false;
2055                                 xhci_dbg(xhci, "td_list is empty while skip "
2056                                                 "flag set. Clear skip flag.\n");
2057                         }
2058                         ret = 0;
2059                         goto cleanup;
2060                 }
2061
2062                 td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
2063
2064                 /* Is this a TRB in the currently executing TD? */
2065                 event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
2066                                 td->last_trb, event_dma);
2067
2068                 /*
2069                  * Skip the Force Stopped Event. The event_trb(event_dma) of FSE
2070                  * is not in the current TD pointed by ep_ring->dequeue because
2071                  * that the hardware dequeue pointer still at the previous TRB
2072                  * of the current TD. The previous TRB maybe a Link TD or the
2073                  * last TRB of the previous TD. The command completion handle
2074                  * will take care the rest.
2075                  */
2076                 if (!event_seg && trb_comp_code == COMP_STOP_INVAL) {
2077                         ret = 0;
2078                         goto cleanup;
2079                 }
2080
2081                 if (!event_seg) {
2082                         if (!ep->skip ||
2083                             !usb_endpoint_xfer_isoc(&td->urb->ep->desc)) {
2084                                 /* Some host controllers give a spurious
2085                                  * successful event after a short transfer.
2086                                  * Ignore it.
2087                                  */
2088                                 if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) &&
2089                                                 ep_ring->last_td_was_short) {
2090                                         ep_ring->last_td_was_short = false;
2091                                         ret = 0;
2092                                         goto cleanup;
2093                                 }
2094                                 /* HC is busted, give up! */
2095                                 xhci_err(xhci,
2096                                         "ERROR Transfer event TRB DMA ptr not "
2097                                         "part of current TD\n");
2098                                 return -ESHUTDOWN;
2099                         }
2100
2101                         ret = skip_isoc_td(xhci, td, event, ep, &status);
2102                         goto cleanup;
2103                 }
2104                 if (trb_comp_code == COMP_SHORT_TX)
2105                         ep_ring->last_td_was_short = true;
2106                 else
2107                         ep_ring->last_td_was_short = false;
2108
2109                 if (ep->skip) {
2110                         xhci_dbg(xhci, "Found td. Clear skip flag.\n");
2111                         ep->skip = false;
2112                 }
2113
2114                 event_trb = &event_seg->trbs[(event_dma - event_seg->dma) /
2115                                                 sizeof(*event_trb)];
2116                 /*
2117                  * No-op TRB should not trigger interrupts.
2118                  * If event_trb is a no-op TRB, it means the
2119                  * corresponding TD has been cancelled. Just ignore
2120                  * the TD.
2121                  */
2122                 if ((le32_to_cpu(event_trb->generic.field[3])
2123                              & TRB_TYPE_BITMASK)
2124                                  == TRB_TYPE(TRB_TR_NOOP)) {
2125                         xhci_dbg(xhci,
2126                                  "event_trb is a no-op TRB. Skip it\n");
2127                         goto cleanup;
2128                 }
2129
2130                 /* Now update the urb's actual_length and give back to
2131                  * the core
2132                  */
2133                 if (usb_endpoint_xfer_control(&td->urb->ep->desc))
2134                         ret = process_ctrl_td(xhci, td, event_trb, event, ep,
2135                                                  &status);
2136                 else if (usb_endpoint_xfer_isoc(&td->urb->ep->desc))
2137                         ret = process_isoc_td(xhci, td, event_trb, event, ep,
2138                                                  &status);
2139                 else
2140                         ret = process_bulk_intr_td(xhci, td, event_trb, event,
2141                                                  ep, &status);
2142
2143 cleanup:
2144                 /*
2145                  * Do not update event ring dequeue pointer if ep->skip is set.
2146                  * Will roll back to continue process missed tds.
2147                  */
2148                 if (trb_comp_code == COMP_MISSED_INT || !ep->skip) {
2149                         inc_deq(xhci, xhci->event_ring, true);
2150                 }
2151
2152                 if (ret) {
2153                         urb = td->urb;
2154                         urb_priv = urb->hcpriv;
2155                         /* Leave the TD around for the reset endpoint function
2156                          * to use(but only if it's not a control endpoint,
2157                          * since we already queued the Set TR dequeue pointer
2158                          * command for stalled control endpoints).
2159                          */
2160                         if (usb_endpoint_xfer_control(&urb->ep->desc) ||
2161                                 (trb_comp_code != COMP_STALL &&
2162                                         trb_comp_code != COMP_BABBLE))
2163                                 xhci_urb_free_priv(xhci, urb_priv);
2164
2165                         usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
2166                         if ((urb->actual_length != urb->transfer_buffer_length &&
2167                                                 (urb->transfer_flags &
2168                                                  URB_SHORT_NOT_OK)) ||
2169                                         status != 0)
2170                                 xhci_dbg(xhci, "Giveback URB %p, len = %d, "
2171                                                 "expected = %x, status = %d\n",
2172                                                 urb, urb->actual_length,
2173                                                 urb->transfer_buffer_length,
2174                                                 status);
2175                         spin_unlock(&xhci->lock);
2176                         /* EHCI, UHCI, and OHCI always unconditionally set the
2177                          * urb->status of an isochronous endpoint to 0.
2178                          */
2179                         if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
2180                                 status = 0;
2181                         usb_hcd_giveback_urb(bus_to_hcd(urb->dev->bus), urb, status);
2182                         spin_lock(&xhci->lock);
2183                 }
2184
2185         /*
2186          * If ep->skip is set, it means there are missed tds on the
2187          * endpoint ring need to take care of.
2188          * Process them as short transfer until reach the td pointed by
2189          * the event.
2190          */
2191         } while (ep->skip && trb_comp_code != COMP_MISSED_INT);
2192
2193         return 0;
2194 }
2195
2196 /*
2197  * This function handles all OS-owned events on the event ring.  It may drop
2198  * xhci->lock between event processing (e.g. to pass up port status changes).
2199  * Returns >0 for "possibly more events to process" (caller should call again),
2200  * otherwise 0 if done.  In future, <0 returns should indicate error code.
2201  */
2202 static int xhci_handle_event(struct xhci_hcd *xhci)
2203 {
2204         union xhci_trb *event;
2205         int update_ptrs = 1;
2206         int ret;
2207
2208         if (!xhci->event_ring || !xhci->event_ring->dequeue) {
2209                 xhci->error_bitmask |= 1 << 1;
2210                 return 0;
2211         }
2212
2213         event = xhci->event_ring->dequeue;
2214         /* Does the HC or OS own the TRB? */
2215         if ((le32_to_cpu(event->event_cmd.flags) & TRB_CYCLE) !=
2216             xhci->event_ring->cycle_state) {
2217                 xhci->error_bitmask |= 1 << 2;
2218                 return 0;
2219         }
2220
2221         /*
2222          * Barrier between reading the TRB_CYCLE (valid) flag above and any
2223          * speculative reads of the event's flags/data below.
2224          */
2225         rmb();
2226         /* FIXME: Handle more event types. */
2227         switch ((le32_to_cpu(event->event_cmd.flags) & TRB_TYPE_BITMASK)) {
2228         case TRB_TYPE(TRB_COMPLETION):
2229                 handle_cmd_completion(xhci, &event->event_cmd);
2230                 break;
2231         case TRB_TYPE(TRB_PORT_STATUS):
2232                 handle_port_status(xhci, event);
2233                 update_ptrs = 0;
2234                 break;
2235         case TRB_TYPE(TRB_TRANSFER):
2236                 ret = handle_tx_event(xhci, &event->trans_event);
2237                 if (ret < 0)
2238                         xhci->error_bitmask |= 1 << 9;
2239                 else
2240                         update_ptrs = 0;
2241                 break;
2242         default:
2243                 if ((le32_to_cpu(event->event_cmd.flags) & TRB_TYPE_BITMASK) >=
2244                     TRB_TYPE(48))
2245                         handle_vendor_event(xhci, event);
2246                 else
2247                         xhci->error_bitmask |= 1 << 3;
2248         }
2249         /* Any of the above functions may drop and re-acquire the lock, so check
2250          * to make sure a watchdog timer didn't mark the host as non-responsive.
2251          */
2252         if (xhci->xhc_state & XHCI_STATE_DYING) {
2253                 xhci_dbg(xhci, "xHCI host dying, returning from "
2254                                 "event handler.\n");
2255                 return 0;
2256         }
2257
2258         if (update_ptrs)
2259                 /* Update SW event ring dequeue pointer */
2260                 inc_deq(xhci, xhci->event_ring, true);
2261
2262         /* Are there more items on the event ring?  Caller will call us again to
2263          * check.
2264          */
2265         return 1;
2266 }
2267
2268 /*
2269  * xHCI spec says we can get an interrupt, and if the HC has an error condition,
2270  * we might get bad data out of the event ring.  Section 4.10.2.7 has a list of
2271  * indicators of an event TRB error, but we check the status *first* to be safe.
2272  */
2273 irqreturn_t xhci_irq(struct usb_hcd *hcd)
2274 {
2275         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
2276         u32 status;
2277         union xhci_trb *trb;
2278         u64 temp_64;
2279         union xhci_trb *event_ring_deq;
2280         dma_addr_t deq;
2281
2282         spin_lock(&xhci->lock);
2283         trb = xhci->event_ring->dequeue;
2284         /* Check if the xHC generated the interrupt, or the irq is shared */
2285         status = xhci_readl(xhci, &xhci->op_regs->status);
2286         if (status == 0xffffffff)
2287                 goto hw_died;
2288
2289         if (!(status & STS_EINT)) {
2290                 spin_unlock(&xhci->lock);
2291                 return IRQ_NONE;
2292         }
2293         if (status & STS_FATAL) {
2294                 xhci_warn(xhci, "WARNING: Host System Error\n");
2295                 xhci_halt(xhci);
2296 hw_died:
2297                 spin_unlock(&xhci->lock);
2298                 return -ESHUTDOWN;
2299         }
2300
2301         /*
2302          * Clear the op reg interrupt status first,
2303          * so we can receive interrupts from other MSI-X interrupters.
2304          * Write 1 to clear the interrupt status.
2305          */
2306         status |= STS_EINT;
2307         xhci_writel(xhci, status, &xhci->op_regs->status);
2308         /* FIXME when MSI-X is supported and there are multiple vectors */
2309         /* Clear the MSI-X event interrupt status */
2310
2311         if (hcd->irq != -1) {
2312                 u32 irq_pending;
2313                 /* Acknowledge the PCI interrupt */
2314                 irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
2315                 irq_pending |= 0x3;
2316                 xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending);
2317         }
2318
2319         if (xhci->xhc_state & XHCI_STATE_DYING) {
2320                 xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
2321                                 "Shouldn't IRQs be disabled?\n");
2322                 /* Clear the event handler busy flag (RW1C);
2323                  * the event ring should be empty.
2324                  */
2325                 temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
2326                 xhci_write_64(xhci, temp_64 | ERST_EHB,
2327                                 &xhci->ir_set->erst_dequeue);
2328                 spin_unlock(&xhci->lock);
2329
2330                 return IRQ_HANDLED;
2331         }
2332
2333         event_ring_deq = xhci->event_ring->dequeue;
2334         /* FIXME this should be a delayed service routine
2335          * that clears the EHB.
2336          */
2337         while (xhci_handle_event(xhci) > 0) {}
2338
2339         temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
2340         /* If necessary, update the HW's version of the event ring deq ptr. */
2341         if (event_ring_deq != xhci->event_ring->dequeue) {
2342                 deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
2343                                 xhci->event_ring->dequeue);
2344                 if (deq == 0)
2345                         xhci_warn(xhci, "WARN something wrong with SW event "
2346                                         "ring dequeue ptr.\n");
2347                 /* Update HC event ring dequeue pointer */
2348                 temp_64 &= ERST_PTR_MASK;
2349                 temp_64 |= ((u64) deq & (u64) ~ERST_PTR_MASK);
2350         }
2351
2352         /* Clear the event handler busy flag (RW1C); event ring is empty. */
2353         temp_64 |= ERST_EHB;
2354         xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue);
2355
2356         spin_unlock(&xhci->lock);
2357
2358         return IRQ_HANDLED;
2359 }
2360
2361 irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd)
2362 {
2363         irqreturn_t ret;
2364         struct xhci_hcd *xhci;
2365
2366         xhci = hcd_to_xhci(hcd);
2367         set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
2368         if (xhci->shared_hcd)
2369                 set_bit(HCD_FLAG_SAW_IRQ, &xhci->shared_hcd->flags);
2370
2371         ret = xhci_irq(hcd);
2372
2373         return ret;
2374 }
2375
2376 /****           Endpoint Ring Operations        ****/
2377
2378 /*
2379  * Generic function for queueing a TRB on a ring.
2380  * The caller must have checked to make sure there's room on the ring.
2381  *
2382  * @more_trbs_coming:   Will you enqueue more TRBs before calling
2383  *                      prepare_transfer()?
2384  */
2385 static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
2386                 bool consumer, bool more_trbs_coming,
2387                 u32 field1, u32 field2, u32 field3, u32 field4)
2388 {
2389         struct xhci_generic_trb *trb;
2390
2391         trb = &ring->enqueue->generic;
2392         trb->field[0] = cpu_to_le32(field1);
2393         trb->field[1] = cpu_to_le32(field2);
2394         trb->field[2] = cpu_to_le32(field3);
2395         trb->field[3] = cpu_to_le32(field4);
2396         inc_enq(xhci, ring, consumer, more_trbs_coming);
2397 }
2398
2399 /*
2400  * Does various checks on the endpoint ring, and makes it ready to queue num_trbs.
2401  * FIXME allocate segments if the ring is full.
2402  */
2403 static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
2404                 u32 ep_state, unsigned int num_trbs, gfp_t mem_flags)
2405 {
2406         /* Make sure the endpoint has been added to xHC schedule */
2407         switch (ep_state) {
2408         case EP_STATE_DISABLED:
2409                 /*
2410                  * USB core changed config/interfaces without notifying us,
2411                  * or hardware is reporting the wrong state.
2412                  */
2413                 xhci_warn(xhci, "WARN urb submitted to disabled ep\n");
2414                 return -ENOENT;
2415         case EP_STATE_ERROR:
2416                 xhci_warn(xhci, "WARN waiting for error on ep to be cleared\n");
2417                 /* FIXME event handling code for error needs to clear it */
2418                 /* XXX not sure if this should be -ENOENT or not */
2419                 return -EINVAL;
2420         case EP_STATE_HALTED:
2421                 xhci_dbg(xhci, "WARN halted endpoint, queueing URB anyway.\n");
2422         case EP_STATE_STOPPED:
2423         case EP_STATE_RUNNING:
2424                 break;
2425         default:
2426                 xhci_err(xhci, "ERROR unknown endpoint state for ep\n");
2427                 /*
2428                  * FIXME issue Configure Endpoint command to try to get the HC
2429                  * back into a known state.
2430                  */
2431                 return -EINVAL;
2432         }
2433         if (!room_on_ring(xhci, ep_ring, num_trbs)) {
2434                 /* FIXME allocate more room */
2435                 xhci_err(xhci, "ERROR no room on ep ring\n");
2436                 return -ENOMEM;
2437         }
2438
2439         if (enqueue_is_link_trb(ep_ring)) {
2440                 struct xhci_ring *ring = ep_ring;
2441                 union xhci_trb *next;
2442
2443                 next = ring->enqueue;
2444
2445                 while (last_trb(xhci, ring, ring->enq_seg, next)) {
2446                         /* If we're not dealing with 0.95 hardware,
2447                          * clear the chain bit.
2448                          */
2449                         if (!xhci_link_trb_quirk(xhci))
2450                                 next->link.control &= cpu_to_le32(~TRB_CHAIN);
2451                         else
2452                                 next->link.control |= cpu_to_le32(TRB_CHAIN);
2453
2454                         wmb();
2455                         next->link.control ^= cpu_to_le32((u32) TRB_CYCLE);
2456
2457                         /* Toggle the cycle bit after the last ring segment. */
2458                         if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
2459                                 ring->cycle_state = (ring->cycle_state ? 0 : 1);
2460                                 if (!in_interrupt()) {
2461                                         xhci_dbg(xhci, "queue_trb: Toggle cycle "
2462                                                 "state for ring %p = %i\n",
2463                                                 ring, (unsigned int)ring->cycle_state);
2464                                 }
2465                         }
2466                         ring->enq_seg = ring->enq_seg->next;
2467                         ring->enqueue = ring->enq_seg->trbs;
2468                         next = ring->enqueue;
2469                 }
2470         }
2471
2472         return 0;
2473 }
2474
2475 static int prepare_transfer(struct xhci_hcd *xhci,
2476                 struct xhci_virt_device *xdev,
2477                 unsigned int ep_index,
2478                 unsigned int stream_id,
2479                 unsigned int num_trbs,
2480                 struct urb *urb,
2481                 unsigned int td_index,
2482                 gfp_t mem_flags)
2483 {
2484         int ret;
2485         struct urb_priv *urb_priv;
2486         struct xhci_td  *td;
2487         struct xhci_ring *ep_ring;
2488         struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
2489
2490         ep_ring = xhci_stream_id_to_ring(xdev, ep_index, stream_id);
2491         if (!ep_ring) {
2492                 xhci_dbg(xhci, "Can't prepare ring for bad stream ID %u\n",
2493                                 stream_id);
2494                 return -EINVAL;
2495         }
2496
2497         ret = prepare_ring(xhci, ep_ring,
2498                            le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK,
2499                            num_trbs, mem_flags);
2500         if (ret)
2501                 return ret;
2502
2503         urb_priv = urb->hcpriv;
2504         td = urb_priv->td[td_index];
2505
2506         INIT_LIST_HEAD(&td->td_list);
2507         INIT_LIST_HEAD(&td->cancelled_td_list);
2508
2509         if (td_index == 0) {
2510                 ret = usb_hcd_link_urb_to_ep(bus_to_hcd(urb->dev->bus), urb);
2511                 if (unlikely(ret)) {
2512                         xhci_urb_free_priv(xhci, urb_priv);
2513                         urb->hcpriv = NULL;
2514                         return ret;
2515                 }
2516         }
2517
2518         td->urb = urb;
2519         /* Add this TD to the tail of the endpoint ring's TD list */
2520         list_add_tail(&td->td_list, &ep_ring->td_list);
2521         td->start_seg = ep_ring->enq_seg;
2522         td->first_trb = ep_ring->enqueue;
2523
2524         urb_priv->td[td_index] = td;
2525
2526         return 0;
2527 }
2528
2529 static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb)
2530 {
2531         int num_sgs, num_trbs, running_total, temp, i;
2532         struct scatterlist *sg;
2533
2534         sg = NULL;
2535         num_sgs = urb->num_sgs;
2536         temp = urb->transfer_buffer_length;
2537
2538         xhci_dbg(xhci, "count sg list trbs: \n");
2539         num_trbs = 0;
2540         for_each_sg(urb->sg, sg, num_sgs, i) {
2541                 unsigned int previous_total_trbs = num_trbs;
2542                 unsigned int len = sg_dma_len(sg);
2543
2544                 /* Scatter gather list entries may cross 64KB boundaries */
2545                 running_total = TRB_MAX_BUFF_SIZE -
2546                         (sg_dma_address(sg) & (TRB_MAX_BUFF_SIZE - 1));
2547                 running_total &= TRB_MAX_BUFF_SIZE - 1;
2548                 if (running_total != 0)
2549                         num_trbs++;
2550
2551                 /* How many more 64KB chunks to transfer, how many more TRBs? */
2552                 while (running_total < sg_dma_len(sg) && running_total < temp) {
2553                         num_trbs++;
2554                         running_total += TRB_MAX_BUFF_SIZE;
2555                 }
2556                 xhci_dbg(xhci, " sg #%d: dma = %#llx, len = %#x (%d), num_trbs = %d\n",
2557                                 i, (unsigned long long)sg_dma_address(sg),
2558                                 len, len, num_trbs - previous_total_trbs);
2559
2560                 len = min_t(int, len, temp);
2561                 temp -= len;
2562                 if (temp == 0)
2563                         break;
2564         }
2565         xhci_dbg(xhci, "\n");
2566         if (!in_interrupt())
2567                 xhci_dbg(xhci, "ep %#x - urb len = %d, sglist used, "
2568                                 "num_trbs = %d\n",
2569                                 urb->ep->desc.bEndpointAddress,
2570                                 urb->transfer_buffer_length,
2571                                 num_trbs);
2572         return num_trbs;
2573 }
2574
2575 static void check_trb_math(struct urb *urb, int num_trbs, int running_total)
2576 {
2577         if (num_trbs != 0)
2578                 dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated number of "
2579                                 "TRBs, %d left\n", __func__,
2580                                 urb->ep->desc.bEndpointAddress, num_trbs);
2581         if (running_total != urb->transfer_buffer_length)
2582                 dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, "
2583                                 "queued %#x (%d), asked for %#x (%d)\n",
2584                                 __func__,
2585                                 urb->ep->desc.bEndpointAddress,
2586                                 running_total, running_total,
2587                                 urb->transfer_buffer_length,
2588                                 urb->transfer_buffer_length);
2589 }
2590
2591 static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
2592                 unsigned int ep_index, unsigned int stream_id, int start_cycle,
2593                 struct xhci_generic_trb *start_trb)
2594 {
2595         /*
2596          * Pass all the TRBs to the hardware at once and make sure this write
2597          * isn't reordered.
2598          */
2599         wmb();
2600         if (start_cycle)
2601                 start_trb->field[3] |= cpu_to_le32(start_cycle);
2602         else
2603                 start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
2604         xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
2605 }
2606
2607 /*
2608  * xHCI uses normal TRBs for both bulk and interrupt.  When the interrupt
2609  * endpoint is to be serviced, the xHC will consume (at most) one TD.  A TD
2610  * (comprised of sg list entries) can take several service intervals to
2611  * transmit.
2612  */
2613 int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
2614                 struct urb *urb, int slot_id, unsigned int ep_index)
2615 {
2616         struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci,
2617                         xhci->devs[slot_id]->out_ctx, ep_index);
2618         int xhci_interval;
2619         int ep_interval;
2620
2621         xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx->ep_info));
2622         ep_interval = urb->interval;
2623         /* Convert to microframes */
2624         if (urb->dev->speed == USB_SPEED_LOW ||
2625                         urb->dev->speed == USB_SPEED_FULL)
2626                 ep_interval *= 8;
2627         /* FIXME change this to a warning and a suggestion to use the new API
2628          * to set the polling interval (once the API is added).
2629          */
2630         if (xhci_interval != ep_interval) {
2631                 if (printk_ratelimit())
2632                         dev_dbg(&urb->dev->dev, "Driver uses different interval"
2633                                         " (%d microframe%s) than xHCI "
2634                                         "(%d microframe%s)\n",
2635                                         ep_interval,
2636                                         ep_interval == 1 ? "" : "s",
2637                                         xhci_interval,
2638                                         xhci_interval == 1 ? "" : "s");
2639                 urb->interval = xhci_interval;
2640                 /* Convert back to frames for LS/FS devices */
2641                 if (urb->dev->speed == USB_SPEED_LOW ||
2642                                 urb->dev->speed == USB_SPEED_FULL)
2643                         urb->interval /= 8;
2644         }
2645         return xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
2646 }
2647
2648 /*
2649  * The TD size is the number of bytes remaining in the TD (including this TRB),
2650  * right shifted by 10.
2651  * It must fit in bits 21:17, so it can't be bigger than 31.
2652  */
2653 static u32 xhci_td_remainder(unsigned int remainder)
2654 {
2655         u32 max = (1 << (21 - 17 + 1)) - 1;
2656
2657         if ((remainder >> 10) >= max)
2658                 return max << 17;
2659         else
2660                 return (remainder >> 10) << 17;
2661 }
2662
2663 /*
2664  * For xHCI 1.0 host controllers, TD size is the number of packets remaining in
2665  * the TD (*not* including this TRB).
2666  *
2667  * Total TD packet count = total_packet_count =
2668  *     roundup(TD size in bytes / wMaxPacketSize)
2669  *
2670  * Packets transferred up to and including this TRB = packets_transferred =
2671  *     rounddown(total bytes transferred including this TRB / wMaxPacketSize)
2672  *
2673  * TD size = total_packet_count - packets_transferred
2674  *
2675  * It must fit in bits 21:17, so it can't be bigger than 31.
2676  */
2677
2678 static u32 xhci_v1_0_td_remainder(int running_total, int trb_buff_len,
2679                 unsigned int total_packet_count, struct urb *urb)
2680 {
2681         int packets_transferred;
2682
2683         /* All the TRB queueing functions don't count the current TRB in
2684          * running_total.
2685          */
2686         packets_transferred = (running_total + trb_buff_len) /
2687                 le16_to_cpu(urb->ep->desc.wMaxPacketSize);
2688
2689         return xhci_td_remainder(total_packet_count - packets_transferred);
2690 }
2691
2692 static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
2693                 struct urb *urb, int slot_id, unsigned int ep_index)
2694 {
2695         struct xhci_ring *ep_ring;
2696         unsigned int num_trbs;
2697         struct urb_priv *urb_priv;
2698         struct xhci_td *td;
2699         struct scatterlist *sg;
2700         int num_sgs;
2701         int trb_buff_len, this_sg_len, running_total;
2702         unsigned int total_packet_count;
2703         bool first_trb;
2704         u64 addr;
2705         bool more_trbs_coming;
2706
2707         struct xhci_generic_trb *start_trb;
2708         int start_cycle;
2709
2710         ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
2711         if (!ep_ring)
2712                 return -EINVAL;
2713
2714         num_trbs = count_sg_trbs_needed(xhci, urb);
2715         num_sgs = urb->num_sgs;
2716         total_packet_count = roundup(urb->transfer_buffer_length,
2717                         le16_to_cpu(urb->ep->desc.wMaxPacketSize));
2718
2719         trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id],
2720                         ep_index, urb->stream_id,
2721                         num_trbs, urb, 0, mem_flags);
2722         if (trb_buff_len < 0)
2723                 return trb_buff_len;
2724
2725         urb_priv = urb->hcpriv;
2726         td = urb_priv->td[0];
2727
2728         /*
2729          * Don't give the first TRB to the hardware (by toggling the cycle bit)
2730          * until we've finished creating all the other TRBs.  The ring's cycle
2731          * state may change as we enqueue the other TRBs, so save it too.
2732          */
2733         start_trb = &ep_ring->enqueue->generic;
2734         start_cycle = ep_ring->cycle_state;
2735
2736         running_total = 0;
2737         /*
2738          * How much data is in the first TRB?
2739          *
2740          * There are three forces at work for TRB buffer pointers and lengths:
2741          * 1. We don't want to walk off the end of this sg-list entry buffer.
2742          * 2. The transfer length that the driver requested may be smaller than
2743          *    the amount of memory allocated for this scatter-gather list.
2744          * 3. TRBs buffers can't cross 64KB boundaries.
2745          */
2746         sg = urb->sg;
2747         addr = (u64) sg_dma_address(sg);
2748         this_sg_len = sg_dma_len(sg);
2749         trb_buff_len = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1));
2750         trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
2751         if (trb_buff_len > urb->transfer_buffer_length)
2752                 trb_buff_len = urb->transfer_buffer_length;
2753         xhci_dbg(xhci, "First length to xfer from 1st sglist entry = %u\n",
2754                         trb_buff_len);
2755
2756         first_trb = true;
2757         /* Queue the first TRB, even if it's zero-length */
2758         do {
2759                 u32 field = 0;
2760                 u32 length_field = 0;
2761                 u32 remainder = 0;
2762
2763                 /* Don't change the cycle bit of the first TRB until later */
2764                 if (first_trb) {
2765                         first_trb = false;
2766                         if (start_cycle == 0)
2767                                 field |= 0x1;
2768                 } else
2769                         field |= ep_ring->cycle_state;
2770
2771                 /* Chain all the TRBs together; clear the chain bit in the last
2772                  * TRB to indicate it's the last TRB in the chain.
2773                  */
2774                 if (num_trbs > 1) {
2775                         field |= TRB_CHAIN;
2776                 } else {
2777                         /* FIXME - add check for ZERO_PACKET flag before this */
2778                         td->last_trb = ep_ring->enqueue;
2779                         field |= TRB_IOC;
2780                 }
2781
2782                 /* Only set interrupt on short packet for IN endpoints */
2783                 if (usb_urb_dir_in(urb))
2784                         field |= TRB_ISP;
2785
2786                 xhci_dbg(xhci, " sg entry: dma = %#x, len = %#x (%d), "
2787                                 "64KB boundary at %#x, end dma = %#x\n",
2788                                 (unsigned int) addr, trb_buff_len, trb_buff_len,
2789                                 (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
2790                                 (unsigned int) addr + trb_buff_len);
2791                 if (TRB_MAX_BUFF_SIZE -
2792                                 (addr & (TRB_MAX_BUFF_SIZE - 1)) < trb_buff_len) {
2793                         xhci_warn(xhci, "WARN: sg dma xfer crosses 64KB boundaries!\n");
2794                         xhci_dbg(xhci, "Next boundary at %#x, end dma = %#x\n",
2795                                         (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
2796                                         (unsigned int) addr + trb_buff_len);
2797                 }
2798
2799                 /* Set the TRB length, TD size, and interrupter fields. */
2800                 if (xhci->hci_version < 0x100) {
2801                         remainder = xhci_td_remainder(
2802                                         urb->transfer_buffer_length -
2803                                         running_total);
2804                 } else {
2805                         remainder = xhci_v1_0_td_remainder(running_total,
2806                                         trb_buff_len, total_packet_count, urb);
2807                 }
2808                 length_field = TRB_LEN(trb_buff_len) |
2809                         remainder |
2810                         TRB_INTR_TARGET(0);
2811
2812                 if (num_trbs > 1)
2813                         more_trbs_coming = true;
2814                 else
2815                         more_trbs_coming = false;
2816                 queue_trb(xhci, ep_ring, false, more_trbs_coming,
2817                                 lower_32_bits(addr),
2818                                 upper_32_bits(addr),
2819                                 length_field,
2820                                 field | TRB_TYPE(TRB_NORMAL));
2821                 --num_trbs;
2822                 running_total += trb_buff_len;
2823
2824                 /* Calculate length for next transfer --
2825                  * Are we done queueing all the TRBs for this sg entry?
2826                  */
2827                 this_sg_len -= trb_buff_len;
2828                 if (this_sg_len == 0) {
2829                         --num_sgs;
2830                         if (num_sgs == 0)
2831                                 break;
2832                         sg = sg_next(sg);
2833                         addr = (u64) sg_dma_address(sg);
2834                         this_sg_len = sg_dma_len(sg);
2835                 } else {
2836                         addr += trb_buff_len;
2837                 }
2838
2839                 trb_buff_len = TRB_MAX_BUFF_SIZE -
2840                         (addr & (TRB_MAX_BUFF_SIZE - 1));
2841                 trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
2842                 if (running_total + trb_buff_len > urb->transfer_buffer_length)
2843                         trb_buff_len =
2844                                 urb->transfer_buffer_length - running_total;
2845         } while (running_total < urb->transfer_buffer_length);
2846
2847         check_trb_math(urb, num_trbs, running_total);
2848         giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
2849                         start_cycle, start_trb);
2850         return 0;
2851 }
2852
2853 /* This is very similar to what ehci-q.c qtd_fill() does */
2854 int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
2855                 struct urb *urb, int slot_id, unsigned int ep_index)
2856 {
2857         struct xhci_ring *ep_ring;
2858         struct urb_priv *urb_priv;
2859         struct xhci_td *td;
2860         int num_trbs;
2861         struct xhci_generic_trb *start_trb;
2862         bool first_trb;
2863         bool more_trbs_coming;
2864         int start_cycle;
2865         u32 field, length_field;
2866
2867         int running_total, trb_buff_len, ret;
2868         unsigned int total_packet_count;
2869         u64 addr;
2870
2871         if (urb->num_sgs)
2872                 return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
2873
2874         ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
2875         if (!ep_ring)
2876                 return -EINVAL;
2877
2878         num_trbs = 0;
2879         /* How much data is (potentially) left before the 64KB boundary? */
2880         running_total = TRB_MAX_BUFF_SIZE -
2881                 (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1));
2882         running_total &= TRB_MAX_BUFF_SIZE - 1;
2883
2884         /* If there's some data on this 64KB chunk, or we have to send a
2885          * zero-length transfer, we need at least one TRB
2886          */
2887         if (running_total != 0 || urb->transfer_buffer_length == 0)
2888                 num_trbs++;
2889         /* How many more 64KB chunks to transfer, how many more TRBs? */
2890         while (running_total < urb->transfer_buffer_length) {
2891                 num_trbs++;
2892                 running_total += TRB_MAX_BUFF_SIZE;
2893         }
2894         /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
2895
2896         if (!in_interrupt())
2897                 xhci_dbg(xhci, "ep %#x - urb len = %#x (%d), "
2898                                 "addr = %#llx, num_trbs = %d\n",
2899                                 urb->ep->desc.bEndpointAddress,
2900                                 urb->transfer_buffer_length,
2901                                 urb->transfer_buffer_length,
2902                                 (unsigned long long)urb->transfer_dma,
2903                                 num_trbs);
2904
2905         ret = prepare_transfer(xhci, xhci->devs[slot_id],
2906                         ep_index, urb->stream_id,
2907                         num_trbs, urb, 0, mem_flags);
2908         if (ret < 0)
2909                 return ret;
2910
2911         urb_priv = urb->hcpriv;
2912         td = urb_priv->td[0];
2913
2914         /*
2915          * Don't give the first TRB to the hardware (by toggling the cycle bit)
2916          * until we've finished creating all the other TRBs.  The ring's cycle
2917          * state may change as we enqueue the other TRBs, so save it too.
2918          */
2919         start_trb = &ep_ring->enqueue->generic;
2920         start_cycle = ep_ring->cycle_state;
2921
2922         running_total = 0;
2923         total_packet_count = roundup(urb->transfer_buffer_length,
2924                         le16_to_cpu(urb->ep->desc.wMaxPacketSize));
2925         /* How much data is in the first TRB? */
2926         addr = (u64) urb->transfer_dma;
2927         trb_buff_len = TRB_MAX_BUFF_SIZE -
2928                 (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1));
2929         if (trb_buff_len > urb->transfer_buffer_length)
2930                 trb_buff_len = urb->transfer_buffer_length;
2931
2932         first_trb = true;
2933
2934         /* Queue the first TRB, even if it's zero-length */
2935         do {
2936                 u32 remainder = 0;
2937                 field = 0;
2938
2939                 /* Don't change the cycle bit of the first TRB until later */
2940                 if (first_trb) {
2941                         first_trb = false;
2942                         if (start_cycle == 0)
2943                                 field |= 0x1;
2944                 } else
2945                         field |= ep_ring->cycle_state;
2946
2947                 /* Chain all the TRBs together; clear the chain bit in the last
2948                  * TRB to indicate it's the last TRB in the chain.
2949                  */
2950                 if (num_trbs > 1) {
2951                         field |= TRB_CHAIN;
2952                 } else {
2953                         /* FIXME - add check for ZERO_PACKET flag before this */
2954                         td->last_trb = ep_ring->enqueue;
2955                         field |= TRB_IOC;
2956                 }
2957
2958                 /* Only set interrupt on short packet for IN endpoints */
2959                 if (usb_urb_dir_in(urb))
2960                         field |= TRB_ISP;
2961
2962                 /* Set the TRB length, TD size, and interrupter fields. */
2963                 if (xhci->hci_version < 0x100) {
2964                         remainder = xhci_td_remainder(
2965                                         urb->transfer_buffer_length -
2966                                         running_total);
2967                 } else {
2968                         remainder = xhci_v1_0_td_remainder(running_total,
2969                                         trb_buff_len, total_packet_count, urb);
2970                 }
2971                 length_field = TRB_LEN(trb_buff_len) |
2972                         remainder |
2973                         TRB_INTR_TARGET(0);
2974
2975                 if (num_trbs > 1)
2976                         more_trbs_coming = true;
2977                 else
2978                         more_trbs_coming = false;
2979                 queue_trb(xhci, ep_ring, false, more_trbs_coming,
2980                                 lower_32_bits(addr),
2981                                 upper_32_bits(addr),
2982                                 length_field,
2983                                 field | TRB_TYPE(TRB_NORMAL));
2984                 --num_trbs;
2985                 running_total += trb_buff_len;
2986
2987                 /* Calculate length for next transfer */
2988                 addr += trb_buff_len;
2989                 trb_buff_len = urb->transfer_buffer_length - running_total;
2990                 if (trb_buff_len > TRB_MAX_BUFF_SIZE)
2991                         trb_buff_len = TRB_MAX_BUFF_SIZE;
2992         } while (running_total < urb->transfer_buffer_length);
2993
2994         check_trb_math(urb, num_trbs, running_total);
2995         giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
2996                         start_cycle, start_trb);
2997         return 0;
2998 }
2999
3000 /* Caller must have locked xhci->lock */
3001 int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
3002                 struct urb *urb, int slot_id, unsigned int ep_index)
3003 {
3004         struct xhci_ring *ep_ring;
3005         int num_trbs;
3006         int ret;
3007         struct usb_ctrlrequest *setup;
3008         struct xhci_generic_trb *start_trb;
3009         int start_cycle;
3010         u32 field, length_field;
3011         struct urb_priv *urb_priv;
3012         struct xhci_td *td;
3013
3014         ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
3015         if (!ep_ring)
3016                 return -EINVAL;
3017
3018         /*
3019          * Need to copy setup packet into setup TRB, so we can't use the setup
3020          * DMA address.
3021          */
3022         if (!urb->setup_packet)
3023                 return -EINVAL;
3024
3025         if (!in_interrupt())
3026                 xhci_dbg(xhci, "Queueing ctrl tx for slot id %d, ep %d\n",
3027                                 slot_id, ep_index);
3028         /* 1 TRB for setup, 1 for status */
3029         num_trbs = 2;
3030         /*
3031          * Don't need to check if we need additional event data and normal TRBs,
3032          * since data in control transfers will never get bigger than 16MB
3033          * XXX: can we get a buffer that crosses 64KB boundaries?
3034          */
3035         if (urb->transfer_buffer_length > 0)
3036                 num_trbs++;
3037         ret = prepare_transfer(xhci, xhci->devs[slot_id],
3038                         ep_index, urb->stream_id,
3039                         num_trbs, urb, 0, mem_flags);
3040         if (ret < 0)
3041                 return ret;
3042
3043         urb_priv = urb->hcpriv;
3044         td = urb_priv->td[0];
3045
3046         /*
3047          * Don't give the first TRB to the hardware (by toggling the cycle bit)
3048          * until we've finished creating all the other TRBs.  The ring's cycle
3049          * state may change as we enqueue the other TRBs, so save it too.
3050          */
3051         start_trb = &ep_ring->enqueue->generic;
3052         start_cycle = ep_ring->cycle_state;
3053
3054         /* Queue setup TRB - see section 6.4.1.2.1 */
3055         /* FIXME better way to translate setup_packet into two u32 fields? */
3056         setup = (struct usb_ctrlrequest *) urb->setup_packet;
3057         field = 0;
3058         field |= TRB_IDT | TRB_TYPE(TRB_SETUP);
3059         if (start_cycle == 0)
3060                 field |= 0x1;
3061
3062         /* xHCI 1.0 6.4.1.2.1: Transfer Type field */
3063         if (xhci->hci_version == 0x100) {
3064                 if (urb->transfer_buffer_length > 0) {
3065                         if (setup->bRequestType & USB_DIR_IN)
3066                                 field |= TRB_TX_TYPE(TRB_DATA_IN);
3067                         else
3068                                 field |= TRB_TX_TYPE(TRB_DATA_OUT);
3069                 }
3070         }
3071
3072         queue_trb(xhci, ep_ring, false, true,
3073                   setup->bRequestType | setup->bRequest << 8 | le16_to_cpu(setup->wValue) << 16,
3074                   le16_to_cpu(setup->wIndex) | le16_to_cpu(setup->wLength) << 16,
3075                   TRB_LEN(8) | TRB_INTR_TARGET(0),
3076                   /* Immediate data in pointer */
3077                   field);
3078
3079         /* If there's data, queue data TRBs */
3080         /* Only set interrupt on short packet for IN endpoints */
3081         if (usb_urb_dir_in(urb))
3082                 field = TRB_ISP | TRB_TYPE(TRB_DATA);
3083         else
3084                 field = TRB_TYPE(TRB_DATA);
3085
3086         length_field = TRB_LEN(urb->transfer_buffer_length) |
3087                 xhci_td_remainder(urb->transfer_buffer_length) |
3088                 TRB_INTR_TARGET(0);
3089         if (urb->transfer_buffer_length > 0) {
3090                 if (setup->bRequestType & USB_DIR_IN)
3091                         field |= TRB_DIR_IN;
3092                 queue_trb(xhci, ep_ring, false, true,
3093                                 lower_32_bits(urb->transfer_dma),
3094                                 upper_32_bits(urb->transfer_dma),
3095                                 length_field,
3096                                 field | ep_ring->cycle_state);
3097         }
3098
3099         /* Save the DMA address of the last TRB in the TD */
3100         td->last_trb = ep_ring->enqueue;
3101
3102         /* Queue status TRB - see Table 7 and sections 4.11.2.2 and 6.4.1.2.3 */
3103         /* If the device sent data, the status stage is an OUT transfer */
3104         if (urb->transfer_buffer_length > 0 && setup->bRequestType & USB_DIR_IN)
3105                 field = 0;
3106         else
3107                 field = TRB_DIR_IN;
3108         queue_trb(xhci, ep_ring, false, false,
3109                         0,
3110                         0,
3111                         TRB_INTR_TARGET(0),
3112                         /* Event on completion */
3113                         field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state);
3114
3115         giveback_first_trb(xhci, slot_id, ep_index, 0,
3116                         start_cycle, start_trb);
3117         return 0;
3118 }
3119
3120 static int count_isoc_trbs_needed(struct xhci_hcd *xhci,
3121                 struct urb *urb, int i)
3122 {
3123         int num_trbs = 0;
3124         u64 addr, td_len, running_total;
3125
3126         addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset);
3127         td_len = urb->iso_frame_desc[i].length;
3128
3129         running_total = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1));
3130         running_total &= TRB_MAX_BUFF_SIZE - 1;
3131         if (running_total != 0)
3132                 num_trbs++;
3133
3134         while (running_total < td_len) {
3135                 num_trbs++;
3136                 running_total += TRB_MAX_BUFF_SIZE;
3137         }
3138
3139         return num_trbs;
3140 }
3141
3142 /*
3143  * The transfer burst count field of the isochronous TRB defines the number of
3144  * bursts that are required to move all packets in this TD.  Only SuperSpeed
3145  * devices can burst up to bMaxBurst number of packets per service interval.
3146  * This field is zero based, meaning a value of zero in the field means one
3147  * burst.  Basically, for everything but SuperSpeed devices, this field will be
3148  * zero.  Only xHCI 1.0 host controllers support this field.
3149  */
3150 static unsigned int xhci_get_burst_count(struct xhci_hcd *xhci,
3151                 struct usb_device *udev,
3152                 struct urb *urb, unsigned int total_packet_count)
3153 {
3154         unsigned int max_burst;
3155
3156         if (xhci->hci_version < 0x100 || udev->speed != USB_SPEED_SUPER)
3157                 return 0;
3158
3159         max_burst = urb->ep->ss_ep_comp.bMaxBurst;
3160         return roundup(total_packet_count, max_burst + 1) - 1;
3161 }
3162
3163 /*
3164  * Returns the number of packets in the last "burst" of packets.  This field is
3165  * valid for all speeds of devices.  USB 2.0 devices can only do one "burst", so
3166  * the last burst packet count is equal to the total number of packets in the
3167  * TD.  SuperSpeed endpoints can have up to 3 bursts.  All but the last burst
3168  * must contain (bMaxBurst + 1) number of packets, but the last burst can
3169  * contain 1 to (bMaxBurst + 1) packets.
3170  */
3171 static unsigned int xhci_get_last_burst_packet_count(struct xhci_hcd *xhci,
3172                 struct usb_device *udev,
3173                 struct urb *urb, unsigned int total_packet_count)
3174 {
3175         unsigned int max_burst;
3176         unsigned int residue;
3177
3178         if (xhci->hci_version < 0x100)
3179                 return 0;
3180
3181         switch (udev->speed) {
3182         case USB_SPEED_SUPER:
3183                 /* bMaxBurst is zero based: 0 means 1 packet per burst */
3184                 max_burst = urb->ep->ss_ep_comp.bMaxBurst;
3185                 residue = total_packet_count % (max_burst + 1);
3186                 /* If residue is zero, the last burst contains (max_burst + 1)
3187                  * number of packets, but the TLBPC field is zero-based.
3188                  */
3189                 if (residue == 0)
3190                         return max_burst;
3191                 return residue - 1;
3192         default:
3193                 if (total_packet_count == 0)
3194                         return 0;
3195                 return total_packet_count - 1;
3196         }
3197 }
3198
3199 /* This is for isoc transfer */
3200 static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
3201                 struct urb *urb, int slot_id, unsigned int ep_index)
3202 {
3203         struct xhci_ring *ep_ring;
3204         struct urb_priv *urb_priv;
3205         struct xhci_td *td;
3206         int num_tds, trbs_per_td;
3207         struct xhci_generic_trb *start_trb;
3208         bool first_trb;
3209         int start_cycle;
3210         u32 field, length_field;
3211         int running_total, trb_buff_len, td_len, td_remain_len, ret;
3212         u64 start_addr, addr;
3213         int i, j;
3214         bool more_trbs_coming;
3215
3216         ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
3217
3218         num_tds = urb->number_of_packets;
3219         if (num_tds < 1) {
3220                 xhci_dbg(xhci, "Isoc URB with zero packets?\n");
3221                 return -EINVAL;
3222         }
3223
3224         if (!in_interrupt())
3225                 xhci_dbg(xhci, "ep %#x - urb len = %#x (%d),"
3226                                 " addr = %#llx, num_tds = %d\n",
3227                                 urb->ep->desc.bEndpointAddress,
3228                                 urb->transfer_buffer_length,
3229                                 urb->transfer_buffer_length,
3230                                 (unsigned long long)urb->transfer_dma,
3231                                 num_tds);
3232
3233         start_addr = (u64) urb->transfer_dma;
3234         start_trb = &ep_ring->enqueue->generic;
3235         start_cycle = ep_ring->cycle_state;
3236
3237         /* Queue the first TRB, even if it's zero-length */
3238         for (i = 0; i < num_tds; i++) {
3239                 unsigned int total_packet_count;
3240                 unsigned int burst_count;
3241                 unsigned int residue;
3242
3243                 first_trb = true;
3244                 running_total = 0;
3245                 addr = start_addr + urb->iso_frame_desc[i].offset;
3246                 td_len = urb->iso_frame_desc[i].length;
3247                 td_remain_len = td_len;
3248                 /* FIXME: Ignoring zero-length packets, can those happen? */
3249                 total_packet_count = roundup(td_len,
3250                                 le16_to_cpu(urb->ep->desc.wMaxPacketSize));
3251                 burst_count = xhci_get_burst_count(xhci, urb->dev, urb,
3252                                 total_packet_count);
3253                 residue = xhci_get_last_burst_packet_count(xhci,
3254                                 urb->dev, urb, total_packet_count);
3255
3256                 trbs_per_td = count_isoc_trbs_needed(xhci, urb, i);
3257
3258                 ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
3259                                 urb->stream_id, trbs_per_td, urb, i, mem_flags);
3260                 if (ret < 0)
3261                         return ret;
3262
3263                 urb_priv = urb->hcpriv;
3264                 td = urb_priv->td[i];
3265
3266                 for (j = 0; j < trbs_per_td; j++) {
3267                         u32 remainder = 0;
3268                         field = TRB_TBC(burst_count) | TRB_TLBPC(residue);
3269
3270                         if (first_trb) {
3271                                 /* Queue the isoc TRB */
3272                                 field |= TRB_TYPE(TRB_ISOC);
3273                                 /* Assume URB_ISO_ASAP is set */
3274                                 field |= TRB_SIA;
3275                                 if (i == 0) {
3276                                         if (start_cycle == 0)
3277                                                 field |= 0x1;
3278                                 } else
3279                                         field |= ep_ring->cycle_state;
3280                                 first_trb = false;
3281                         } else {
3282                                 /* Queue other normal TRBs */
3283                                 field |= TRB_TYPE(TRB_NORMAL);
3284                                 field |= ep_ring->cycle_state;
3285                         }
3286
3287                         /* Only set interrupt on short packet for IN EPs */
3288                         if (usb_urb_dir_in(urb))
3289                                 field |= TRB_ISP;
3290
3291                         /* Chain all the TRBs together; clear the chain bit in
3292                          * the last TRB to indicate it's the last TRB in the
3293                          * chain.
3294                          */
3295                         if (j < trbs_per_td - 1) {
3296                                 field |= TRB_CHAIN;
3297                                 more_trbs_coming = true;
3298                         } else {
3299                                 td->last_trb = ep_ring->enqueue;
3300                                 field |= TRB_IOC;
3301                                 if (xhci->hci_version == 0x100) {
3302                                         /* Set BEI bit except for the last td */
3303                                         if (i < num_tds - 1)
3304                                                 field |= TRB_BEI;
3305                                 }
3306                                 more_trbs_coming = false;
3307                         }
3308
3309                         /* Calculate TRB length */
3310                         trb_buff_len = TRB_MAX_BUFF_SIZE -
3311                                 (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
3312                         if (trb_buff_len > td_remain_len)
3313                                 trb_buff_len = td_remain_len;
3314
3315                         /* Set the TRB length, TD size, & interrupter fields. */
3316                         if (xhci->hci_version < 0x100) {
3317                                 remainder = xhci_td_remainder(
3318                                                 td_len - running_total);
3319                         } else {
3320                                 remainder = xhci_v1_0_td_remainder(
3321                                                 running_total, trb_buff_len,
3322                                                 total_packet_count, urb);
3323                         }
3324                         length_field = TRB_LEN(trb_buff_len) |
3325                                 remainder |
3326                                 TRB_INTR_TARGET(0);
3327
3328                         queue_trb(xhci, ep_ring, false, more_trbs_coming,
3329                                 lower_32_bits(addr),
3330                                 upper_32_bits(addr),
3331                                 length_field,
3332                                 field);
3333                         running_total += trb_buff_len;
3334
3335                         addr += trb_buff_len;
3336                         td_remain_len -= trb_buff_len;
3337                 }
3338
3339                 /* Check TD length */
3340                 if (running_total != td_len) {
3341                         xhci_err(xhci, "ISOC TD length unmatch\n");
3342                         return -EINVAL;
3343                 }
3344         }
3345
3346         if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
3347                 if (xhci->quirks & XHCI_AMD_PLL_FIX)
3348                         usb_amd_quirk_pll_disable();
3349         }
3350         xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs++;
3351
3352         giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
3353                         start_cycle, start_trb);
3354         return 0;
3355 }
3356
3357 /*
3358  * Check transfer ring to guarantee there is enough room for the urb.
3359  * Update ISO URB start_frame and interval.
3360  * Update interval as xhci_queue_intr_tx does. Just use xhci frame_index to
3361  * update the urb->start_frame by now.
3362  * Always assume URB_ISO_ASAP set, and NEVER use urb->start_frame as input.
3363  */
3364 int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
3365                 struct urb *urb, int slot_id, unsigned int ep_index)
3366 {
3367         struct xhci_virt_device *xdev;
3368         struct xhci_ring *ep_ring;
3369         struct xhci_ep_ctx *ep_ctx;
3370         int start_frame;
3371         int xhci_interval;
3372         int ep_interval;
3373         int num_tds, num_trbs, i;
3374         int ret;
3375
3376         xdev = xhci->devs[slot_id];
3377         ep_ring = xdev->eps[ep_index].ring;
3378         ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
3379
3380         num_trbs = 0;
3381         num_tds = urb->number_of_packets;
3382         for (i = 0; i < num_tds; i++)
3383                 num_trbs += count_isoc_trbs_needed(xhci, urb, i);
3384
3385         /* Check the ring to guarantee there is enough room for the whole urb.
3386          * Do not insert any td of the urb to the ring if the check failed.
3387          */
3388         ret = prepare_ring(xhci, ep_ring, le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK,
3389                            num_trbs, mem_flags);
3390         if (ret)
3391                 return ret;
3392
3393         start_frame = xhci_readl(xhci, &xhci->run_regs->microframe_index);
3394         start_frame &= 0x3fff;
3395
3396         urb->start_frame = start_frame;
3397         if (urb->dev->speed == USB_SPEED_LOW ||
3398                         urb->dev->speed == USB_SPEED_FULL)
3399                 urb->start_frame >>= 3;
3400
3401         xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx->ep_info));
3402         ep_interval = urb->interval;
3403         /* Convert to microframes */
3404         if (urb->dev->speed == USB_SPEED_LOW ||
3405                         urb->dev->speed == USB_SPEED_FULL)
3406                 ep_interval *= 8;
3407         /* FIXME change this to a warning and a suggestion to use the new API
3408          * to set the polling interval (once the API is added).
3409          */
3410         if (xhci_interval != ep_interval) {
3411                 if (printk_ratelimit())
3412                         dev_dbg(&urb->dev->dev, "Driver uses different interval"
3413                                         " (%d microframe%s) than xHCI "
3414                                         "(%d microframe%s)\n",
3415                                         ep_interval,
3416                                         ep_interval == 1 ? "" : "s",
3417                                         xhci_interval,
3418                                         xhci_interval == 1 ? "" : "s");
3419                 urb->interval = xhci_interval;
3420                 /* Convert back to frames for LS/FS devices */
3421                 if (urb->dev->speed == USB_SPEED_LOW ||
3422                                 urb->dev->speed == USB_SPEED_FULL)
3423                         urb->interval /= 8;
3424         }
3425         return xhci_queue_isoc_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
3426 }
3427
3428 /****           Command Ring Operations         ****/
3429
3430 /* Generic function for queueing a command TRB on the command ring.
3431  * Check to make sure there's room on the command ring for one command TRB.
3432  * Also check that there's room reserved for commands that must not fail.
3433  * If this is a command that must not fail, meaning command_must_succeed = TRUE,
3434  * then only check for the number of reserved spots.
3435  * Don't decrement xhci->cmd_ring_reserved_trbs after we've queued the TRB
3436  * because the command event handler may want to resubmit a failed command.
3437  */
3438 static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2,
3439                 u32 field3, u32 field4, bool command_must_succeed)
3440 {
3441         int reserved_trbs = xhci->cmd_ring_reserved_trbs;
3442         int ret;
3443
3444         if (!command_must_succeed)
3445                 reserved_trbs++;
3446
3447         ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING,
3448                         reserved_trbs, GFP_ATOMIC);
3449         if (ret < 0) {
3450                 xhci_err(xhci, "ERR: No room for command on command ring\n");
3451                 if (command_must_succeed)
3452                         xhci_err(xhci, "ERR: Reserved TRB counting for "
3453                                         "unfailable commands failed.\n");
3454                 return ret;
3455         }
3456         queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3,
3457                         field4 | xhci->cmd_ring->cycle_state);
3458         return 0;
3459 }
3460
3461 /* Queue a slot enable or disable request on the command ring */
3462 int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id)
3463 {
3464         return queue_command(xhci, 0, 0, 0,
3465                         TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id), false);
3466 }
3467
3468 /* Queue an address device command TRB */
3469 int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
3470                 u32 slot_id)
3471 {
3472         return queue_command(xhci, lower_32_bits(in_ctx_ptr),
3473                         upper_32_bits(in_ctx_ptr), 0,
3474                         TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id),
3475                         false);
3476 }
3477
3478 int xhci_queue_vendor_command(struct xhci_hcd *xhci,
3479                 u32 field1, u32 field2, u32 field3, u32 field4)
3480 {
3481         return queue_command(xhci, field1, field2, field3, field4, false);
3482 }
3483
3484 /* Queue a reset device command TRB */
3485 int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id)
3486 {
3487         return queue_command(xhci, 0, 0, 0,
3488                         TRB_TYPE(TRB_RESET_DEV) | SLOT_ID_FOR_TRB(slot_id),
3489                         false);
3490 }
3491
3492 /* Queue a configure endpoint command TRB */
3493 int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
3494                 u32 slot_id, bool command_must_succeed)
3495 {
3496         return queue_command(xhci, lower_32_bits(in_ctx_ptr),
3497                         upper_32_bits(in_ctx_ptr), 0,
3498                         TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id),
3499                         command_must_succeed);
3500 }
3501
3502 /* Queue an evaluate context command TRB */
3503 int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
3504                 u32 slot_id)
3505 {
3506         return queue_command(xhci, lower_32_bits(in_ctx_ptr),
3507                         upper_32_bits(in_ctx_ptr), 0,
3508                         TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id),
3509                         false);
3510 }
3511
3512 /*
3513  * Suspend is set to indicate "Stop Endpoint Command" is being issued to stop
3514  * activity on an endpoint that is about to be suspended.
3515  */
3516 int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
3517                 unsigned int ep_index, int suspend)
3518 {
3519         u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
3520         u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
3521         u32 type = TRB_TYPE(TRB_STOP_RING);
3522         u32 trb_suspend = SUSPEND_PORT_FOR_TRB(suspend);
3523
3524         return queue_command(xhci, 0, 0, 0,
3525                         trb_slot_id | trb_ep_index | type | trb_suspend, false);
3526 }
3527
3528 /* Set Transfer Ring Dequeue Pointer command.
3529  * This should not be used for endpoints that have streams enabled.
3530  */
3531 static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
3532                 unsigned int ep_index, unsigned int stream_id,
3533                 struct xhci_segment *deq_seg,
3534                 union xhci_trb *deq_ptr, u32 cycle_state)
3535 {
3536         dma_addr_t addr;
3537         u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
3538         u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
3539         u32 trb_stream_id = STREAM_ID_FOR_TRB(stream_id);
3540         u32 type = TRB_TYPE(TRB_SET_DEQ);
3541         struct xhci_virt_ep *ep;
3542
3543         addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr);
3544         if (addr == 0) {
3545                 xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
3546                 xhci_warn(xhci, "WARN deq seg = %p, deq pt = %p\n",
3547                                 deq_seg, deq_ptr);
3548                 return 0;
3549         }
3550         ep = &xhci->devs[slot_id]->eps[ep_index];
3551         if ((ep->ep_state & SET_DEQ_PENDING)) {
3552                 xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
3553                 xhci_warn(xhci, "A Set TR Deq Ptr command is pending.\n");
3554                 return 0;
3555         }
3556         ep->queued_deq_seg = deq_seg;
3557         ep->queued_deq_ptr = deq_ptr;
3558         return queue_command(xhci, lower_32_bits(addr) | cycle_state,
3559                         upper_32_bits(addr), trb_stream_id,
3560                         trb_slot_id | trb_ep_index | type, false);
3561 }
3562
3563 int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
3564                 unsigned int ep_index)
3565 {
3566         u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
3567         u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
3568         u32 type = TRB_TYPE(TRB_RESET_EP);
3569
3570         return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type,
3571                         false);
3572 }